Must Have An Unlocked Bootloader To Do This!
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 4 With Higher Firmware!!!!
Unless Using Bit Safe Firmware That Is Patched
Downloads
SM-G975U/U1/W- Model
USERDATA_AIO_G975_CANARY_FORCE_WIPE_2022_01_28.tar.md5 --Use on android 11 or 12
This will force a wipe of data no mater what.
Full Odin 4.0 Android 12 Bit4 Safe Firmware
G975USQU6HULD_BIT4_SAFE.7z
This are odin files and will safely update all image files too bit 6 and keep bit 4 bootloaders. Unfortunately this will wipe data this is beyond my control as it seems to be a side affect of mixing firmware it causes data not to mount and therefore my AIO will format it. This is full firmware with USERDATA_AIO. This will put you on U firmware. Before flashing I recommend removing your google account and make sure in download mode you are not frp locked
If above USERDATA_AIO_G975_FORCE_WIPE_08_35_21.tar.md5 is newer than the one in this zip use the newer one from above
Odin3_v3.14.1_3B_PatcheD.zip
Files For SM-G973 Found Here
Files For SM-G970 Found Here
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions For Newly Unlocked Devices
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load file USERDATA_SLOT_*9**U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Install Instructions For Updating Firmware On Phone Already Unlocked
1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above
2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_*9**U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not
Install Instructions If Updating Images With TWRP
1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.
2. Use patched 3.14 odin and load file USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.
4. Alternatively to using USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_21_4_S10U_US_Series_Android_R.zip found in post 2
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
@elliwigy
@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff
Info For U Model Bootloader Unlocking Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
Below US snapdragon devices can be bootloader unlocked with above service as long as bootloader version meets below criteria. Bootloader version can be determined from the 5th character from the right on the baseband version or build number, in some cases from kernel version
Z Fold2 5G BL V1
Fold 5G BL V1-4
Fold BL V1-4
Z Flip 5G BL V1
Z Flip BL V1-3
Note series 20 BL V1
S20 series BL V1
S20 FE 5G BL V1-2
Note 10 series BL V1-5
S10 Lite BL V1-3
Note 10+ 5G N976U BL V1-4
Note 10+ 5G N976V BL V1-5
S10 5G BL V1-5
S10 series BL V1-4
Note 9 BL V1-7
S9 series BL V1-9
Tab S6 BL V1-3
Tab S7 BL V1
Tab S7+ BL V1
A71 5G BL V1-2
A51 BL V1-5
A51 5G BL V1-4
A50 A505W BL V1-A
A50 A505U BL V1-B
S21 BL V1
A32 5G BL V1-3
Tab Active Pro 10.1 BL V1-4
XCover Pro BL V1-7
Nice work!
deleted*
I update the tar file so now only one is needed for android 10 or 11 and I and I changed the safenet fix to the latest one that patches your own keystore file thanks @afaneh92 for the module and have it install as a magisk module so it doesnt affect system files that way if a bettery way comes out you can simply update the module and not have too worry about replacing system files. If you have used my old tar to root your phone I suggest reflashing stock firmware in odin along with my new tar file and this will remove the safetynet files from system and too the module
it's not working in g975f right ?
Has anyone confirmed this is working correctly other than the noted things that don't?
Fixed issues where if bluetooth or keystore files are already patched in system by other means then my installer will just skip them instead of failing during flash
MikeyLee said:
Has anyone confirmed this is working correctly other than the noted things that don't?
Click to expand...
Click to collapse
I updated OP files fixed a few issues added CSC mods back to flash. It works plus secure folder works on android 11
Add files for SM-G975W Canadian Model
can you can SM-G9750 pls ?
Vuska said:
can you can SM-G9750 pls ?
Click to expand...
Click to collapse
This one should work on SM-G9750
USERDATA_SLOT_G975W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
So is safety net disabled?
Can i use this guide for my s10plus japan g975j
anhkoya5 said:
Can i use this guide for my s10plus japan g975j
Click to expand...
Click to collapse
I will post a stuff so all can make there own shortly
Am i out of luck if i am on 9.0 still? Kinda rare to be on Bin 1 still and i wanna keep it that way.
Which .img @AndroidFileHost may be flashed 4 the Pie ROM?
I have One UI 3.0 with bl 4 (5th character from the right is a 4 in build number). which file do i flash? force_wipe_no_bl? or force_wipe_v1?
Hello.
I tried the procedure on an locked SM-G975U device, which failed in Odin.
The problem is that the phone now keeps booting in DL mode with "An arror has occured while updating the device software. Use Emergency recovery function in the Smart Switch PC software".
I tried to use Smart Switch, downloaded from the samsung site (v4.2), but the said recovery procedure does not see my device...
After a while playing with boot loader key combination, it eventually rebooted OK, and after another while, I can enter again in the usual download menu.
Can the price be lower if the number of mobile phones is more？
Related
Take it your own risk! Tested on Galaxy J7 Pro SM-J730G with Android 9 Pie, It may be works on SM-J730GM and SM-J730F
INSTRUCTIONS:
1. Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5
2. Install Magisk Manager Canary Release app-release.pk on your phone. In Magisk Manager: Install → Install → Select and Patch a FileSelect the AP tar file. Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar.
3. Copy the tar file to your PC
4. Enter Download Mode : Press and hold Volume Down key + Home Key, while pressing these keys Press and hold Power key, Release all key when Download / Odin mode appears. Connect your Samsung Galaxy to PC using USB Cable and Press Volume Up key.
5. Flash magisk_patched.tar as AP in ODIN
6. In Option make sure to ticked F.Reset Time and Auto-Reboot only
7. Magisk is now successfully flashed to your device!The device will automatically reboot.* for the first time it needs more time.. just wait and be patient!
8. After the device is booted up, do the usual initial setup. The following steps will need internet connection.
9. If you can not see Magisk Manager in your phone, you need to install the APK manually. it will automatically upgrade to the full
10. Magisk Manager when you open it.Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
Updated:
I have tested flashing magisk_patched.tar as AP in ODIN by ticked F.Reset Time and Auto-Reboot only. It means we don't need to Wipe data / Factory reset. It looks like flashing official rom normally.
If you get Security notice: "Unauthorized actions have been detected. Restart your device to undo any unauthorized changes". Just freeze SecurityLogAgent to fix it.
You can watch this video for more detail: https://youtu.be/uvs0GkS9cdw
Excellent
Great report
Thank You
I using Pie 9.0 custom and magisk and twrp
---------- Post added at 10:55 AM ---------- Previous post was at 10:54 AM ----------
Thank You
I using Clean Pie 9.0 custom
Great report thanks for this
redymedan said:
Take it your own risk! Tested on Galaxy J7 Pro SM-J730G with Android 9 Pie, It may be works on SM-J730GM and SM-J730F.
If you get Security notice: "Unauthorized actions have been detected. Restart your device to undo any unauthorized changes". Just freeze SecurityLogAgent to fix it.
You can watch this video for more detail: https://youtu.be/uvs0GkS9cdw
Click to expand...
Click to collapse
This action unlock oem?
hacker812c said:
This action unlock oem?
Click to expand...
Click to collapse
I don't know what you mean "This action unlock oem" on your quote there are 3 points: Rooting, Security Notice and Video Link.
1. this thread rooting with magisk canary release
2. Security Notice it may be appear after root it
3. Video link is a video how to root it completely.
So, no one of its for unlocking OEM that you asking.. If you look for unlocking OEM, I suggest you use Miracle Box tools for by passing 7 days. I also have created a video to unlock OEM using miracle box for J7 Pro only.
redymedan said:
I don't know what you mean "This action unlock oem" on your quote there are 3 points: Rooting, Security Notice and Video Link.
1. this thread rooting with magisk canary release
2. Security Notice it may be appear after root it
3. Video link is a video how to root it completely.
So, no one of its for unlocking OEM that you asking.. If you look for unlocking OEM, I suggest you use Miracle Box tools for by passing 7 days. I also have created a video to unlock OEM using miracle box for J7 Pro only.
Click to expand...
Click to collapse
Thank You for reply
I see your vídeo fantastic
Congratulations
Hacker Brazil
How to root and custum recovery twrp for j7 pro j730GM official android Pie?
Xxxnano said:
How to root and custum recovery twrp for j7 pro j730GM official android Pie?
Click to expand...
Click to collapse
1
After root flash twrp 3.3 from Anan
Enter imediatly in twrp flash Magisk 19.1
Flash too kernel helios
2
Ir you internal sd encript
Wipe Factory reset and flash twrp
Enter imediatly in twrp flash Magisk 19.1
Flash too kernel helios
In odin im stuck in analysis
Same problem in Odin I wait analysis no more move next step why?
Xxxnano said:
Same problem in Odin I wait analysis no more move next step why?
Click to expand...
Click to collapse
Please detail your system
ROM 9 ? Oem unlocked?
God night wait reply
My phone J7 pro j730GM India I flash official android pie all ok. In Odin I have failed to AP magisik tar.
Sandhya29 said:
In odin im stuck in analysis
Click to expand...
Click to collapse
I can not see problem with the picture
Firmware link please....
Xxxnano said:
My phone J7 pro j730GM India I flash official android pie all ok. In Odin I have failed to AP magisik tar.
Click to expand...
Click to collapse
OK.
See this informations
I did not test the execution of this method of root. I currently have root since version 7 and 8.
First question you need to have oem unlock.
If you do not have this option you probably will not be able to install twrp and magisk.
i using j730G using custom pie magisk and twrp. My kernel is helios kernel
I do not go back to the official samsung version exactly because of the blockade of oem among other things that samsung is inventing.
oh god so im blocked in official pie no twrp i m very idiot to instal stock pie.
after root internal memory is almost full
I instaled TWRP in pie stock after I instal custum rom all work only no sim card and when I instal in Odin stock rom sim card work. Why in custom rom don't work?
Xxxnano said:
I instaled TWRP in pie stock after I instal custum rom all work only no sim card and when I instal in Odin stock rom sim card work. Why in custom rom don't work?
Click to expand...
Click to collapse
My suggestion
Install CP and bootloader from last 8.1 rom
CP is modem and sim
I m using CP and bootloader 8.1
Steps
After Install custom rom and twrp
Download Official 8.1 latest rom
Unpack
Open Odin
Flash Only CP modem and bootloader
Wait reboot
If sim run perfectly enjoy
This is my State
Please Press Thanks
God night
Thanks all work i flased 8.1 sboot to odin for pie sim card work and custum rom work and rooted magisik and TWRP all ok
quyetpro said:
after root internal memory is almost full
Click to expand...
Click to collapse
Probably
your internal sd is encripty
1. wipe your j7 and factory reset.
2. flash twrp and enter recovery imediatly
3. flash magisk 19.x and flash other custom rom in this point
---------- Post added at 01:25 PM ---------- Previous post was at 01:19 PM ----------
Xxxnano said:
Thanks all work i flased 8.1 sboot to odin for pie sim card work and custum rom work and rooted magisik and TWRP all ok
Click to expand...
Click to collapse
Good my friend very good
happy for your result root and magisk
remember only flash new CP and bootloader after this solution (probably new kernel) kernel
God night...
I have a Samsung A7 2017 (SM-A720F) brought from UAE having latest Oreo update. While I tried to flash an INS version over this Odin detects the phone. But after hitting start it takes some time and gives error like failed. I also tried to root it with CF-AutoRoot file. Those also have the same error. Developer mode, USB debugging and OEM unlock are ON. Trying with windows 10 + Odin 3.13 (latest). Any solution ?
Combination file successfully flashed. But, still not able to flash another country File. Can I proceed with original country file (i.e XSG stock firmware) ?
Please help me
MajjuBhai said:
I have a Samsung A7 2017 (SM-A720F) brought from UAE having latest Oreo update. While I tried to flash an INS version over this Odin detects the phone. But after hitting start it takes some time and gives error like failed. I also tried to root it with CF-AutoRoot file. Those also have the same error. Developer mode, USB debugging and OEM unlock are ON. Trying with windows 10 + Odin 3.13 (latest). Any solution ?
Click to expand...
Click to collapse
Root with twrp and magisk, cfautoroot is OG in my opinion . Try flashing just CSC_home or whatever it is called in Odin.
SnowFuhrer said:
Root with twrp and magisk, cfautoroot is OG in my opinion . Try flashing just CSC_home or whatever it is called in Odin.
Click to expand...
Click to collapse
I'm able to flash Combination file, original country (XSG) file and also flashes TWRP. But, I can't get access to TWRP after flashing it. Always it replaced by Stock recovery. And apart these 3 files nothing flashes, including CSC file alone...
MajjuBhai said:
I'm able to flash Combination file, original country (XSG) file and also flashes TWRP. But, I can't get access to TWRP after flashing it. Always it replaced by Stock recovery. And apart these 3 files nothing flashes, including CSC file alone...
Click to expand...
Click to collapse
When you flash twrp, untick auto reboot in odin. Boot straight into twrp without booting system.
SnowFuhrer said:
When you flash twrp, untick auto reboot in odin. Boot straight into twrp without booting system.
Click to expand...
Click to collapse
Ok Boss. One last question. After rooting my phone Can I able to flash any country Firmware on my phone ?
If Yes, Any precuations to be taken ?
(Currently it is on RMM State : Prenormal, I will try flashing TWRP after a couple of days.)
MajjuBhai said:
Ok Boss. One last question. After rooting my phone Can I able to flash any country Firmware on my phone ?
If Yes, Any precuations to be taken ?
(Currently it is on RMM State : Prenormal, I will try flashing TWRP after a couple of days.)
Click to expand...
Click to collapse
It won't help change the csc. But hadesrom oneui has a huge selection of csc's you can select when flashing it.
SnowFuhrer said:
It won't help change the csc. But hadesrom oneui has a huge selection of csc's you can select when flashing it.
Click to expand...
Click to collapse
If I flashed HadesROM OneUI with 'INS' CSC can I able to downgrade it with INS Stock firmware in future ?
Is the binary thing really need to consider while flashing that ?
PS : I looked on HadesROM. It is temptating. But, the real problem is with VoLTE which affects the network badly here... The VoLTE only network is a large mess here... And thanks for your unconditional Help & Support :fingers-crossed:
MajjuBhai said:
If I flashed HadesROM OneUI with 'INS' CSC can I able to downgrade it with INS Stock firmware in future ?
Is the binary thing really need to consider while flashing that ?
PS : I looked on HadesROM. It is temptating. But, the real problem is with VoLTE which affects the network badly here... The VoLTE only network is a large mess here... And thanks for your unconditional Help & Support :fingers-crossed:
Click to expand...
Click to collapse
It should work to change csc with Hades and then flash stock. Just make sure you don't reflash csc then because it could change.
Hello. I have managed to Root My Samsung Galaxy Tab S7 Model SM-T875 with KNOX value 0x1 and no custom recovery has been installed. I am linking an image from Root Checker
bit.ly/3kOE6NW
Sorry for bitly link guys, this is my first post so not allowed to post url, pls understand
Only for SM-T875
If you have any other models, let me know, I will patch their boot.tar and provide link for the same
Steps for root :
Download and install the latest version of Magisk Manager
Make sure you have an unlocked boot loader
On your PC, download Odin and put your S7 into download mode
Flash the tar file listed here
I am linking the exact boot.tar image I used
bit.ly/3j4mYDw
Sorry for bitly link guys, this is my first post so not allowed to post url, pls understand
In Odin, select the AP option, make sure ur tab is connected in COM1 and then select the boot.tar file. Once flashed, you have to restart your device.
NOTE
Once this boot.img file is flashed you will get this an error saying your device is not on official firmware and you will have to hard reset your device, go ahead and hard reset your device, you might think its in bootloop but it is not. Once hard reset is done, your device will boot twice, make sure to press the power button each time to skip the unlocked bootloader warning. Once done, set up your tab as new one. Now Magisk Manager will not be installed on your device. For root , go ahead and install Magisk Manager again and this time Magisk will be installed in your device and your Knox value will be 0x1 and warranty will be void and device will be rooted
If any questions, please feel free to ask
Hope this helped you
Did someone confirmed?*I wait to got the root before to buy this model specifically
T870
Hi, can you please upload the patched boot img for SM-T870?
Thanks in advanced..
Sushantydv said:
Hi, can you please upload the patched boot img for SM-T870?
Thanks in advanced..
Click to expand...
Click to collapse
just copy and past the provided link address he gave into your browser and download
jionny said:
just copy and past the provided link address he gave into your browser and download
Click to expand...
Click to collapse
The link is for the t875 version mate.. i need image file for t870
Sushantydv said:
Hi, can you please upload the patched boot img for SM-T870?
Thanks in advanced..
Click to expand...
Click to collapse
Sure, here ya go
bit.ly/33DC7GM
If this img file is not flashing, make sure to tar it using 7-zip and then flash from ODIN.
This is the boot.img from the latest version of Android Q (release Sep 1) so make sure you're on the same version before flashing this.
Let me know if this worked or if you need the boot file for any other version
also, sry for bitly link, am not trying to profit out of this, once my 10 posts are complete, i'll post direct download links.
Thx for understanding
umibuzu said:
Did someone confirmed?*I wait to got the root before to buy this model specifically
Click to expand...
Click to collapse
Not that I should be saying this, but if you want to know, I have done the same steps on both of my Tab S7's and bot are working while being rooted. If you still want someone else to confirm, im totally fine with it. Thx for replying tho.
Sushantydv said:
The link is for the t875 version mate.. i need image file for t870
Click to expand...
Click to collapse
T870 XAR version. Be sure to select the proper ver... TH1 or TI4 or TJ4.
Updated 11-2-20
https://forum.xda-developers.com/galaxy-tab-s7/how-to/magisk-t4159291
Could you do t878?
jhill110 said:
T870 XAR version. Be sure to select the proper ver... TH1 or TI4 or TJ4.
Updated 11-2-20
https://forum.xda-developers.com/galaxy-tab-s7/how-to/magisk-t4159291
Click to expand...
Click to collapse
Is there a working custom recovery (TWRP) for the T875/870 yet? Haven't found anyone mention it so far.
rosrog said:
Is there a working custom recovery (TWRP) for the T875/870 yet? Haven't found anyone mention it so far.
Click to expand...
Click to collapse
Unfortunately no.
I have T875 TabS7 brand new I have Build number
QP1A.190711.020.T875XXU1ATI4 and device says upd are available ATJ4 Something. with october patch. The boot image you have linked is of which firmware ?. Should I update and then root.
EDIT:
Anyways i followed this guide by Dr ketan for rooting which i used for my Note 20 Ultra and it didnt work with patching AP file method.
https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/guide-how-to-root-n20-ultra-t4147023
So i downloaded the latest firmware which was ATJ4 my CSC version was CAC so i downloaded same firmware from SAMFW(super website with downloads resumable via google drive option.
1. I extracted boot.img.lz4 from AP file of stock firmware downloaded and made a TAR file of it with 7Zip
2. Put it in phone and used magisk manager on tab to patch this file
3. Copy back to PC and flash via odin 3.14.3 in AP tab and uncheck auto reboot in ODIN
4. Booted straight into stock recovery and wiped/factory reset
5. Now i have root on Tab S7 T785.
Here is a link to boot file patched for TAB S7 N985 LTE Latest ATJ4 Firmware .
http://www.mediafire.com/file/mhss32jmt1b1oza/Patched_BooT_ATJ4_TAB_S7_N985.zip/file
Possible to Root SM-T878U ?
Smoker1 said:
Possible to Root SM-T878U ?
Click to expand...
Click to collapse
Yeah it might be.
I have gotten a TWRP up and running on my Galaxy Tab S7 but it's not functioning properly, I'll post the stable version here in case I figure out one haha.
I have the Tab S6 and I love it. I am thinking to buy the Tab S7+. I was very quick to root the Tab S6 and did not take much notice of the Knox trip. Is there any sell value if the tablet cannot have certain apps working such as secure folder? I understand even if you unroot and relock the bootloader then knox is still going to be changed to 0x1
My Tablet still seems to be 0x0 though.
CamronCamr said:
Yeah it might be.
Click to expand...
Click to collapse
Any luck on this? I also was dumb enough to get this T878U from ATT. I realize I have a signed locked bootloader. Is there any hope for us? I'm fairly technical and can follow directions
I'm in the same boat. Att locked out usb and wifi tethering. A rooted device would be very helpful.
Did you have any luck with magisk hide(safetynet)? I'm still waiting for fingerprint for magisk-hide-props-config.
Is this possible for the SM-T978U?
legokangpalla said:
Did you have any luck with magisk hide(safetynet)? I'm still waiting for fingerprint for magisk-hide-props-config.
Click to expand...
Click to collapse
On the latest Samsung Tab S7 T875 Stock firmware Android 11 and one UI 3.1 , i have it rooted with Magisk V22 , widevine is L1, and safetynet passed .
Running with following magisk modules
1. Magiskhide props Config (Just install no config set
2. Riru
3. Riru Edxposed
4. Universal safetynet Fix V2.00 Test version 2 Thanks to kdrag0n
Can everyone help me？ thank you
device:SM-G988U
Unlock the BL
firmware：oneUI 3.1 DUB5
Can someone answer me？
remove all screen locks
try again. load all the firmware in it. bl, ap,cp,home_csc, vbmeta
zhouyuchen said:
Can someone answer me？
Click to expand...
Click to collapse
After unsuccessfully trying to root latest DUB5 firmware form T-mobile with Magisk - found a solution:
1. Patch original T-mobile AP with Magisk.
2. Replace BL_N986USQU1DUB5_CL20936746_QB38027387_REV00_user_low_ship_MULTI_CERT.tar.md5 with any other Snapdragon BL image from Android 11 (Latest XAA will work).
3. T-Mobile apperently locks vbmeta to official state in latest firmwares.
4. If you do not repalce BL file, you will get an error "vbmeta_fail" and your phone will get locked.
Enjoy!
Many users report imei errors months after rooting. I don't recommend rooting. we do not know the origin of the problem
Hi friends.
On Topjohnwu's github, there´s a note about root any Samsung without recovery
Basically, extract the AP from stock firmware, copy it to phone, install magisk from xda forum, patch it, download the patched file to your pc and flash it using Odin.
You must fresh flash the entire ROM and the patched AP, userdata MUST be formatted (use CSC, not HOME_CSC)
Use it at your own risk, Knox wil be tripped and you could brick your phone.
Search the note into Topjohnwu´s github, Magisk section, Install and search for specific samsung section.
Be careful and enjoy rooting!
edukardo said:
Hi friends.
On Topjohnwu's github, there´s a note about root any Samsung without recovery
Basically, extract the AP from stock firmware, copy it to phone, install magisk from xda forum, patch it, download the patched file to your pc and flash it using Odin.
You must fresh flash the entire ROM and the patched AP, userdata MUST be formatted (use CSC, not HOME_CSC)
Use it at your own risk, Knox wil be tripped and you could brick your phone.
Search the note into Topjohnwu´s github, Magisk section, Install and search for specific samsung section.
Be careful and enjoy rooting!
Click to expand...
Click to collapse
Well, currently i am not gonna root this devices. Still feel comfort with full stock ROM, maybe after custom ROM arrive for this devices it will changes my mind to root the devices.
gusbalaa said:
Well, currently i am not gonna root this devices. Still feel comfort with full stock ROM, maybe after custom ROM arrive for this devices it will changes my mind to root the devices.
Click to expand...
Click to collapse
Is OK, just a bit of work debloating...
edukardo said:
Hi friends.
On Topjohnwu's github, there´s a note about root any Samsung without recovery
Basically, extract the AP from stock firmware, copy it to phone, install magisk from xda forum, patch it, download the patched file to your pc and flash it using Odin.
You must fresh flash the entire ROM and the patched AP, userdata MUST be formatted (use CSC, not HOME_CSC)
Use it at your own risk, Knox wil be tripped and you could brick your phone.
Search the note into Topjohnwu´s github, Magisk section, Install and search for specific samsung section.
Be careful and enjoy rooting!
Click to expand...
Click to collapse
Here's my story, I patched the AP file and flashed it using odin, didn't add any other stock firmware files. I was able to attain root privileges, then the unthinkable happened. I received a call and it got disconnected instantly. The network signals vanished, I restarted the phone and was welcomed with a flash notification message "IMEI null or invalid."
I've since flashed it 10-12 times.
IMEI hasn't been restored, wifi works though.
I've given up hope now, my daughter attends her school classes on it.
I have never heard of such a case. Where did you get the boot.img from? It must be the same version as your phone. I recommend you flash a clean software by Odin, without root, and verify that everything is normal
edukardo said:
I have never heard of such a case. Where did you get the boot.img from? It must be the same version as your phone. I recommend you flash a clean software by Odin, without root, and verify that everything is normal
Click to expand...
Click to collapse
Downloaded and extracted the AP file from the original firmware. It has happened with another guy, he did post a video on youtube, fixed it using some Z3X box.
The firmware was the original, but was it the same version as the one you had installed?
edukardo said:
The firmware was the original, but was it the same version as the one you had installed?
Click to expand...
Click to collapse
Yes, downloaded it using frija.. I did just flashed the patched AP file, skipped the rest, maybe that was the reason..
Did you get the IMEI back?
edukardo said:
Did you get the IMEI back?
Click to expand...
Click to collapse
Nope, I've given up. Can't invest any more money on the Z3X box..
Why don't you flash the whole system from Odin? No modifications. That should work
edukardo said:
Why don't you flash the whole system from Odin? No modifications. That should work
Click to expand...
Click to collapse
I've already done that 10-12 times to no avail.
You must download the exact version of rom for your country/carrier. Search for it in sammobile.
Can't understand what the problem is.
I´ve got no problem at all
edukardo said:
I´ve got no problem at all
Click to expand...
Click to collapse
Were you able to root it?
Also, in addition to the patched AP file do we need to flash the BL, CP and CSC files?
Yep no issues. Magisk hide, all working.
When you extracted the boot img, there where another files into the AP file provided by samsung that must be flashed too.
Do you have the patched file? Try flashing BL, CP, CSC and AP and then flash again only the patched boot.img into AP.
But I think it has nothing to the root with loose of imei.
Was your phone a company one? Like verizon, etc?
edukardo said:
Yep no issues. Magisk hide, all working.
When you extracted the boot img, there where another files into the AP file provided by samsung that must be flashed too.
Do you have the patched file? Try flashing BL, CP, CSC and AP and then flash again only the patched boot.img into AP.
But I think it has nothing to the root with loose of imei.
Was your phone a company one? Like verizon, etc?
Click to expand...
Click to collapse
No, it's unlocked. Did you patch the whole AP file or just the boot file through magisk? I patched the entire AP file. If you could please list all the steps, it would be a huge help. Thanks.
edukardo said:
Yep no issues. Magisk hide, all working.
When you extracted the boot img, there where another files into the AP file provided by samsung that must be flashed too.
Do you have the patched file? Try flashing BL, CP, CSC and AP and then flash again only the patched boot.img into AP.
But I think it has nothing to the root with loose of imei.
Was your phone a company one? Like verizon, etc?
Click to expand...
Click to collapse
I saw a video of rooting the f62, here's the link. Please take a look and let me know if the steps are the same.
Ouch, working time...
Tutorial - Root - Samsung Galaxy A32 (SM-A325MDS)
--- It is necessary to see the entire video --- ============================ (Download Mediafire) you already have all the files, so the video tutorial starts at 14:23 1- unlock bootloader 2 - use (Odin) and install (magisk_patched-23000_6V0ws)...
forum.xda-developers.com