{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community-built, aftermarket firmware distribution of Android 6, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Audio
Bluetooth
Camera
Display
Encryption
Face unlock
GPS
RIL (VoLTE calls, SMS, Data)
Sensors
Video Playback
Wi-Fi
Known issues:
You tell me the rest
Report bugs:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel (Ignore):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
DO NO POST BUGS WITHOUT LOGS AND PROPER STEPS TO REPRODUCE THE ISSUE
Follow Instructions Carefully otherwise you will get error :
fastboot boot recovery-twrp64-nora.img (ONLY BOOT IT!! TOO BIG TO FLASH!)
Wipe -> ADVANCED -> Format Data - type yes
Wipe -> ADVANCED -- select system + vendor -> SWIPE TO WIPE
reboot bootloader
fastboot flash recovery nora-rec.img
fastboot boot nora-rec.img
Factory reset
Flash ROM, Gapps 10 arm64 pico together (Download Gapps from downloads section)
Done-Reboot Now
Enjoy the clean Rom
64bit Downloads:
ROM:
Moto E5 (Nora) XT-1944
TWRP RECOVERY: twrp-nora-bootonly.img
LOS RECOVERY: nora-rec.img
GAPPS: Gapps 10 arm64
Source code:
ROM: https://github.com/ForkLineageOS/android
KERNEL: https://github.com/motoe5/android_kernel_motorola_msm8937/tree/twerk-X
CREDITS:
LineageOS
Team Hyper
CAF
Special thanks to @amaterasushen for helping make this possible :highfive:
DONATIONS:
Please consider donating if you enjoy my work. It will be used for server expenses, Ty
Paypal donation link: https://www.paypal.me/brickjungle
XDA:DevDB Information
LineageOS-Nora, 64BIT ROM for the Moto E5
Contributors
whodat711, karthick mostwanted, JarlPenguin, amaterasushen, wiktor140
Source Code: http://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Alpha
hi, amazing job for porting this rom
tho i'm a bit confused with the steps to flash the zip files, am i supposed to use "nora-rec.img" recovery to flash the rom and the gapps? i can't find the option to flash zip files in that recovery
Isra_Perez said:
hi, amazing job for porting this rom
tho i'm a bit confused with the steps to flash the zip files, am i supposed to use "nora-rec.img" recovery to flash the rom and the gapps? i can't find the option to flash zip files in that recovery
Click to expand...
Click to collapse
Not a port, rom was actually built properly based off hannah trees (Credits to @karthick mostwanted) , however TWRP was a port from hannah , made by @amaterasushen
The problem is Nora and james both have tiny recovery partition sizes so its gonna require some more work before twrp will be flashable , For now just use it to wipe system and vendor only , and use lineage recovery for the rest, you can goto the 'update' menu in lineage recovery to flash zips for now.
whodat711 said:
Not a port, rom was actually built properly based off hannah trees (Credits to @karthick mostwanted) , however TWRP was a port from hannah , made by @amaterasushen
The problem is Nora and james both have tiny recovery partition sizes so its gonna require some more work before twrp will be flashable , For now just use it to wipe system and vendor only , and use lineage recovery for the rest, you can goto the 'update' menu in lineage recovery to flash zips for now.
Click to expand...
Click to collapse
I already flashed it, after I did a factory reset with the lineage recovery, I rebooted into twrp and flashed both files + magisk, everything is working really well, I'm actually surprised of how fluid this rom is
Nice! , yeah as I said , no port rig job.. its the real deal
Glad you enjoying it
I manage to successfully install this ROM even though I deviated slightly from the instructions. I did the following:
fastboot boot recovery-twrp64-nora.img
Wipe -> ADVANCED -> Format Data - type yes
Wipe -> ADVANCED -- select system + vendor
reboot bootloader
fastboot flash recovery nora-rec.img
fastboot boot nora-rec.img
Factory reset
reboot to bootloader
fastboot boot recovery-twrp64-nora.img
Copied the Lineage and OpenGapps zips to the internal memory and flashed via TWRP without errors
excellent
I have seen in other ROMs that there are graphical bugs and the audio equalizer does not work correctly. Are these bugs present in this ROM?
Nora never had a rom until now
I do not have a nora , however i do not believe it has such bugs
whodat711 said:
Nora never had a rom until now
I do not have a nora , however i do not believe it has such bugs
Click to expand...
Click to collapse
Hello. Thanks for the ROM, I already downloaded it. I'm a bit of a layman about installing ROMs. I was confused to read your instructions. Can I install your ROM in this way (https://tecnoblog.net/283069/como-instalar-lineageos-e-atualizar-o-seu-android/)?
Do you have any other instructions on installation, like a tutorial? Grateful
FERRETTO said:
Hello. Thanks for the ROM, I already downloaded it. I'm a bit of a layman about installing ROMs. I was confused to read your instructions. Can I install your ROM in this way (https://tecnoblog.net/283069/como-instalar-lineageos-e-atualizar-o-seu-android/)?
Do you have any other instructions on installation, like a tutorial? Grateful
Click to expand...
Click to collapse
Nope , instructions are pretty clear .. take your time
FERRETTO said:
Hello. Thanks for the ROM, I already downloaded it. I'm a bit of a layman about installing ROMs. I was confused to read your instructions. Can I install your ROM in this way (https://tecnoblog.net/283069/como-instalar-lineageos-e-atualizar-o-seu-android/)?
Do you have any other instructions on installation, like a tutorial? Grateful
Click to expand...
Click to collapse
Try with this instructions.
Tiki Thorsen said:
Try with this instructions.
Click to expand...
Click to collapse
Sorry for the ignorance, but the procedure is done by the cell phone or the computer?
FERRETTO said:
Sorry for the ignorance, but the procedure is done by the cell phone or the computer?
Click to expand...
Click to collapse
EDIT: You need both, a PC with ADB and the phone.
Tiki Thorsen said:
Cellphone.
Click to expand...
Click to collapse
Thanks, I'll try
Tiki Thorsen said:
EDIT: You need both, a PC with ADB and the phone.
Click to expand...
Click to collapse
Thanks
whodat711 said:
Nope , instructions are pretty clear .. take your time
Click to expand...
Click to collapse
The instructions are clear yes. Thanks
Tiki Thorsen said:
EDIT: You need both, a PC with ADB and the phone.
Click to expand...
Click to collapse
How do you unlock the Bootloader. I did all the steps until I got the key.
fastboot oem get_unlock_data
(bootloader) Unlock data: Key
But on the Motorola website it says "Your device does not qualify for bootloader unlocking.". What to do ?
Mine is the Motorola XT-1944-4
FERRETTO said:
How do you unlock the Bootloader. I did all the steps until I got the key.
fastboot oem get_unlock_data
(bootloader) Unlock data: Key
But on the Motorola website it says "Your device does not qualify for bootloader unlocking.". What to do ?
Mine is the Motorola XT-1944-4
Click to expand...
Click to collapse
If you follow the steps in the motorola website and it says is not unlockable, you are out of luck.
I sugguest you re-redo the firts steps since I had that same model and I was able to unlock de bootloader.
Sorry, double post.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
IR Blaster
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte
Known issues:
You Tell me
Instructions :
Download the latest build and GApps
Reboot to bootloader
Download the oreo stock rom. From here
Download platform tools and extract them straight into the stock rom folder. Not images folder.
Replace the system.img and boot.img with the boot.img, system_other.img and system.img in images folder (system.img and system_other.img are same. Just make 2 copies of system.img and rename one to system_other.img):-|
Replace modem.img from pie stock rom. Grab it HERE
Then use flash_all.bat to install the rom. ( We are using fastboot method because the TWRP is completely broken and doesn't even let us flash the rom. But @33bca is working on one. We'll soon have stable TWRP )
Let the flashing be completed.
After the flash is completed, just go to recovery (stock los one) format data again.
If you want gapps, boot to twrp by downloading official TWRP and using fastboot boot *******.img
Flash gapps
Reboot. After first boot, reboot to twrp
Then flash this kernel in the same recovery.
That's it. Now just reboot and you have a working stable LineageOS
If you like my work, consider hitting the thanks button down there and if possible, donate me Here Via PayPal
Downloads :
UN-Official builds: LATEST BUILD
Special Thanks to @LCockx and @a.dev for testing the builds
JOIN OUR OFFICIAL TELEGRAM GROUP
XDA:DevDB Information
[ROM][UNOFFICIAL][8.1.0][Daisy] LineageOS 15.1 , ROM for the Xiaomi Mi A2 Lite
Contributors
saksham_033
Source Code: Click here
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Stable Release Date: 2019-02-20
Created 2019-02-20
Last Updated 2019-02-20
Reserved
Bootloop for me.
I used V10.0.3.0's modem.img and opengapps 8.1 arm64 nano.
EDIT:
I booted to TWRP and swapped the slots, rebooted to system.
Initially it booted to the LOS recovery, but when I pressed "reboot" in the recovery, it rebooted straight to the LOS animation.
Thanks for this!
EDIT 2:
Oh dear. Wifi appears broken.
rosiepie said:
Bootloop for me.
I used V10.0.3.0's modem.img and opengapps 8.1 arm64 nano.
EDIT:
I booted to TWRP and swapped the slots, rebooted to system.
Initially it booted to the LOS recovery, but when I pressed "reboot" in the recovery, it rebooted straight to the LOS animation.
Thanks for this!
EDIT 2:
Oh dear. Wifi appears broken.
Click to expand...
Click to collapse
Dude, please try to read all the instructions. I have mentioned a kernel. U Need to flash that too. Thanks.
nice one ? finally boot haha maybe I'm wrong the way I flash it? hehe hit button thanks
Pls post antutu benchmark on this rom ty..
Overunity01 said:
Pls post antutu benchmark on this rom ty..
Click to expand...
Click to collapse
76k+
Thank you. There is issue with SIM card and camera if I come from Pie and downgrade?
thank you :good:
saksham_033 said:
Instructions :
Download the latest build and GApps
Replace modem.img from pie stock rom.
Click to expand...
Click to collapse
1. The Latest Build shows a vendor.img - Do we replace that as well?
2. Is there a download available for the stock Pie modem, or do we have to download the whole stock pie rom as well?
Thanks!
saksham_033 said:
Dude, please try to read all the instructions. I have mentioned a kernel. U Need to flash that too. Thanks.
Click to expand...
Click to collapse
I followed all instructions exactly as described.
The kernel was flashed also, and in the order the guide specified.
Thanks for the rom, is this on the last security patch?.
rosiepie said:
I followed all instructions exactly as described.
The kernel was flashed also, and in the order the guide specified.
Click to expand...
Click to collapse
Kernel has to be flashed after first boot
mn1968 said:
1. The Latest Build shows a vendor.img - Do we replace that as well?
2. Is there a download available for the stock Pie modem, or do we have to download the whole stock pie rom as well?
Thanks!
Click to expand...
Click to collapse
Nope. You need not to touch vendor.
Does LOS 15.1 support notch?
downloadonlyaccount said:
Does LOS 15.1 support notch?
Click to expand...
Click to collapse
Yes. Notch is supported
downloadonlyaccount said:
Does LOS 15.1 support notch?
Click to expand...
Click to collapse
notch are not supported by Oreo, except 8.1 stock for daisy
If I'm on pie and need to downgrade but I need 2 SIM cards to work, what vendor to I need?
ergo911 said:
If I'm on pie and need to downgrade but I need 2 SIM cards to work, what vendor to I need?
Click to expand...
Click to collapse
problem is not in vendor choice
you need fix modem settings
https://forum.xda-developers.com/mi-a2-lite/how-to/gsi-tweaks-fix-t3899630
New to this phone
Could you please elaborate on the following:
Instructions :
Download the latest build and GApps
Reboot to bootloader
Download the oreo stock rom. From here
Download platform tools and extract them straight into the stock rom folder. Not images folder. - What platform tools?
Replace the system.img and boot.img with the boot.img, system_other.img and system.img in images folder (system.img and system_other.img are same. Just make 2 copies of system.img and rename one to system_other.img):-|
Replace modem.img from pie stock rom. - Where do i get this?
Then use flash_all.bat to install the rom. ( We are using fastboot method because the TWRP is completely broken and doesn't even let us flash the rom. But @33bca is working on one. We'll soon have stable TWRP )
Let the flashing be completed.
After the flash is completed, just go to recovery (stock los one) format data again.
If you want gapps, boot to twrp by downloading official TWRP and using fastboot boot *******.img
Flash gapps
Reboot. After first boot, reboot to twrp
Then flash this kernel in the same recovery.
That's it. Now just reboot and you have a working stable LineageOS
Click to expand...
Click to collapse
Also, how will updates be flashed?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions :
Download the latest build
Boot to recovery
Flash the latest build
Reboot
Downloads :
Builds :
https://drive.google.com/open?id=1tA3NBQqmTzToTX38ubxsOqRN9juEtwQv
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
XDA:DevDB Information
LineageOS, ROM for the ASUS ROG Phone II
Contributors
luca020400
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
Version Information
Status: Nightly
Created 2020-03-19
Last Updated 2020-03-19
Thanks
Does this support 120hz and the air triggers?
Wow, many thanks indeed!! However, do you have a list if what's working/not working, bugs and such?
i tried to flash it it does not work i done the full wipes and have latest twrp
Error in flashing and all my data are gone. Tsk!
Has anyone managed to boot yet?
Thank You sir for creating the first rom for our phone. Rom booted successfully and 120hz is working like a charm.
If anyone having issue in installing this rom here are the steps -
1) Extract lineage-17.1-20200319-UNOFFICIAL-I001D.zip in your pc and get payload.bin
2)Download payload dumper for windows extract it and than put payload.bin in payload_input folder
3)Run payload_dumper.exe you will get 5 .img files boot,system,vendor,dtbo,vbmeta
4)Flash all of the .img files using fastboot command and than reboot
BlazingBullets said:
Does this support 120hz and the air triggers?
Click to expand...
Click to collapse
Unfortunately, it does not work
I have been waiting for this! Thanks for the ROM.
Also thanks @Apoorv_87, I followed your instructions to install and it worked.
I have a few questions:
How do I enable 120Hz? I cant seem to find it in the display settings.
Do all LineageOS builds come with GApps pre installed now?
RSpe said:
I have been waiting for this! Thanks for the ROM.
Also thanks @Apoorv_87, I followed your instructions to install and it worked.
I have a few questions:
How do I enable 120Hz? I cant seem to find it in the display settings.
Do all LineageOS builds come with GApps pre installed now?
Click to expand...
Click to collapse
You can activate 120Hz from quick settings, just click on the edit icon and than scroll down the last quick setting is of 120Hz just activate it from there
luca020400 said:
Instructions :
Download the latest build
Flash the latest build
Builds :
https://drive.google.com/open?id=1tA3NBQqmTzToTX38ubxsOqRN9juEtwQv
Click to expand...
Click to collapse
Hay dev, why some here report flash this cusrom not work? Flash like what?
Maybe u should give clear instruction.
We need to install gapps or not ?
Thank you. atleast we have one custom ROM now. i know there's a lot of confusions. Please be patient and be nice to the dev.
Apoorv_87 said:
Thank You sir for creating the first rom for our phone. Rom booted successfully and 120hz is working like a charm.
If anyone having issue in installing this rom here are the steps -
1) Extract lineage-17.1-20200319-UNOFFICIAL-I001D.zip in your pc and get payload.bin
2)Download payload dumper for windows extract it and than put payload.bin in payload_input folder
3)Run payload_dumper.exe you will get 5 .img files boot,system,vendor,dtbo,vbmeta
4)Flash all of the .img files using fastboot command and than reboot
Click to expand...
Click to collapse
everytime i flash system or vendor it says i have a storage limit and fails, there is literally nothing in my sotrage
---------- Post added at 08:10 AM ---------- Previous post was at 07:55 AM ----------
i managed to flash but it skipped the setup proccess and nothing but the home screen works, does anyone know why?
---------- Post added at 08:11 AM ---------- Previous post was at 08:10 AM ----------
i managed to flash but it skipped the setup proccess and nothing but the home screen works, does anyone know why?
Thanks again @luca020400 after a lot of trial and error I managed to also get root (Magisk)
RSpe said:
Thanks again @luca020400 after a lot of trial and error I managed to also get root (Magisk)
Click to expand...
Click to collapse
did you flash through twrp?, and did it skip setup for you aswell?
So here a few tips:
I haven't tested flashing with TWRP, all I know is that it works properly using Lineage Recovery, that is provided within the ROM.
I'll upload it as a standalone image
This build includes Gapps because I'm testing -user builds with verity enabled, so these images are basically my goto for testing CTS.
The current broken things are the vibrator ( will fix soon hopefully ) and air triggers ( probably won't be fixed )
Magisk worked last time I tried flashing it, so it should be fine.
For anyone coming from stock/another rom you have to wipe data _properly_ using the fastboot -w command
Also of course you need to be on the latest Android 10 build by Asus.
If there are some size issues, that might happen on some variants, I based the partition sizes on my device, things may change.
Harley appezzato said:
did you flash through twrp?, and did it skip setup for you aswell?
Click to expand...
Click to collapse
I unpacked the zip, got the boot.img (same as the one linked above) moved it to my phone, pactched it with Magisk, moved it back to my PC then flashed it.
This is the only way I could get it working for me. TWRP would break the ROM and make me have to reinstall.
I still went through setup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Flash instructions :
NOTE: This build Required 11.0.4.0 QJZMIXM (EU) firmware
Download the latest build and OpenGapps pico or nano
Reboot to Recovery (download here)
Wipe data
Flash ROM
Flash OpenGapps pico or nano
Reboot to system
Downloads :
Builds :
https://www.androidfilehost.com/?w=files&flid=315170
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Contributors
DUNGPHP, TheMalachite
Source Code: https://github.com/LineageOS
Kernel Source: https://github.com/Redmi-SM6250 or Stock kernel from Miui
ROM OS Version: Android 10
ROM Kernel: Linux 4.14.x
ROM Firmware Required: MIUI 11.04.0, TWRP or PitchBlack recovery
Version Information
Status: Beta
Bugs:
- SELinux is Permissive
Changelogs:
10/8/2020:
Fixed: VoLTE ?, NFC ?, Led notify, ... tell me the bugs you found
11/8/2020:
- Fixed FM radio
- Added Gboard
(rest bugs: DT2W, permissive)
Amazing, 2nd rom for joyeuse And waaaay simpler to install.
The future looks brighter.
Klaus69 said:
Amazing, 2nd rom for joyeuse And waaaay simpler to install.
The future looks brighter.
Click to expand...
Click to collapse
If no one build for joyeuse, i will try
Awesome! Thank you.
Will you aim for becoming official maintainer for this device on LineageOS?
robinkooli said:
Awesome! Thank you.
Will you aim for becoming official maintainer for this device on LineageOS?
Click to expand...
Click to collapse
No, i never can make an offfice build. Just want try build and fix for fun
dungphp said:
No, i never can make an offfice build. Just want try build and fix for fun
Click to expand...
Click to collapse
Which recovery should be use
hendibudi said:
Which recovery should be use
Click to expand...
Click to collapse
PtchBlack is OK
dungphp said:
PtchBlack is OK
Click to expand...
Click to collapse
Throw off the link to this recovery plz
frolka1206 said:
Throw off the link to this recovery plz
Click to expand...
Click to collapse
Here man: https://www.androidfilehost.com/?fid=8889791610682886707
dungphp said:
No, i never can make an offfice build. Just want try build and fix for fun
Click to expand...
Click to collapse
Well dont belittle yourself, every developer starts as novice
dungphp said:
PtchBlack is OK
Click to expand...
Click to collapse
I was successfully booting to Los 10 but when I install gapps I only able to flash smaller size gapps pico and when I try flash gapps stock fail it said not enough space
hendibudi said:
I was successfully booting to Los 10 but when I install install gapps I only able to flash smaller size gapps pico and when I try flash gapps stock fail it said not enough memory space
Click to expand...
Click to collapse
You should use small capacity Gapps to not change the LOS structure
dungphp said:
Bugs:
- Leds notify
- FM radio
- SELinux is Permissive
Why no devs working for joyeuse ?
Click to expand...
Click to collapse
also doesn't work nfc and quick charge (((
frolka1206 said:
also doesn't work nfc and quick charge (((
Click to expand...
Click to collapse
Yeah, i will try fix NFC soon. quick charge or fastchage ? If im not wrong N9 supported fastchage
Now Pixel Experience plz? i want that ROM.
dungphp said:
If no one build for joyeuse, i will try
Click to expand...
Click to collapse
hey ill be here to help soon! just waiting for a ssd bigger then 128gb in the mail :crying: . Great work though showing out device some love. might need to pm you a few things if you dont mind
emime12 said:
Now Pixel Experience plz i want that ROM.
Click to expand...
Click to collapse
Find in my AFH
dungphp said:
Find in my AFH
Click to expand...
Click to collapse
hey, do you have a gapps that is small enough to flash?
EDIT: im sure its an error on my end, but i cant seem to boot the rom. tried both recoveries of yours. any obvious oversight im missing? lol
im onn 11.04 btw
EDIT, flashing works fine but it says no OS is installed when i try to boot
Niropa said:
hey, do you have a gapps that is small enough to flash?
EDIT: im sure its an error on my end, but i cant seem to boot the rom. tried both recoveries of yours. any obvious oversight im missing? lol
im onn 11.04 btw
EDIT, flashing works fine but it says no OS is installed when i try to boot
Click to expand...
Click to collapse
Flash rom, turn off, boot to recovery, flash gapps, boot to system
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Follow the instructions here
Downloads:
Builds: https://exynoobs.github.io/OTA/
GApps: MindTheGapps
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
DO NOT Report bugs if you're using TWRP
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Support
Telegram group
Contributors
DeHuMaNiZeD
Linux4
Synt4x.93
Alastor89
Device tree and kernel source code:
Exynoobs github
Requirements:
S based firmware (OneUI4)
Pre-Install Instructions
Warning: The following instructions will unlock the bootloader and wipe all userdata on the device.
Connect the device to a Wi-Fi network.
Enable Developer Options by pressing the “Build Number” option in the “Settings” app within the “About” menu
From within the Developer options menu, enable OEM unlock.
Power off the device, and boot it into download mode:
With the device powered off, hold Volume Down + Volume Up and connect USB cable to PC.
Now, click the button that the onscren instructions coorelate to “Continue” and/or “Unlock Bootloader”.
Your device will reboot, you may now unplug the USB cable from your device.
The device will demand you format userdata, please follow the onscreen instructions to do so.
Run through Android Setup skipping everything you can, then connect the device to a Wi-Fi network.
Re-enable Development settings by clicking the “Build Number” option 10 times, in the “Settings” app within the “About” menu, and verify that “OEM Unlock” is still enabled in the “Developer options” menu.
Installing LineageOS for the first time
Flash lineage recovery
Only the provided lineage recovery will be supported,
using TWRP might result in a possible data loss!!
If using Odin rename the lineage recovery image for your model to recovery.img and add it to a .tar archive using e.g 7zip.
If using Heimdall use: heimdall flash --RECOVERY recovery.img --no-reboot
Boot lineage recovery
IMPORTANT: Do not boot into system again before booting recovery, or system will restore stock recovery!
If using Odin untick auto-reboot before flashing.
After flashing reboot by pressing Volume Down and Power for approximately 7 seconds,
immediately hold Volume Up and Power to boot recovery
IMPORTANT: As of OneUI 3 your device needs to be connected to a PC via USB cable in order to be able to
boot recovery via Volume Up and Power.
Factory reset using Factory reset -> Format data/factory reset
Warning: Unlike TWRP this will also erase internal storage!
Sideload LineageOS by enabling sideload via Apply Update -> Apply from ADB
Then run adb sideload <path to your lineage.zip> on your PC
Optional:
Sideload GApps and magisk by repeating above step
with their zip/apk
Known issues:
VoLTE/VoWiFi
Google maps
Firmware upgrade instructions:
Get the latest firmware for your device here
Follow the provided instruction for flashing with Heimdall
Gonna try this out later. Nice!
Looks awesome!
NOTE: z3s (Galaxy s20 ultra) and y2s (galaxy s20 plus) builds are still uploading, hold tight
Nice ! Thank you so much for the great work and effort put into this
Two questions:
1. Is 5G working as it is not anymore in the "known issues" section ?
2. When using the latest S firmware is a dirty flash from LOS 18.1 possible ?
Cheers !
flunkyball said:
Nice ! Thank you so much for the great work and effort put into this
Two questions:
1. Is 5G working as it is not anymore in the "known issues" section ?
2. When using the latest S firmware is a dirty flash from LOS 18.1 possible ?
Cheers !
Click to expand...
Click to collapse
I am not sure about 5G as i only have a 4G device. Otherwise the devices are same
about 2. Dirty flashing could Theoretically work but i really cannot guarantee it. You can always try updating only the firmware for your device by going here https://github.com/Linux4/firmware-update/releases and finding your device and flashing everything with heimdall with the provided command, then try dirty flashing without wiping.
All three builds are uploaded now, enjoy!
Exelent ROM for people like me that dislike oneui and all its bloatware. Beside that this rom work so mutch better then the current oneui4 that feels slow and sluggish compared with los12.
Thanks Sent from my Nokia 3310 exynos 5g
Do anyone use lineageos rom to eyestrain but rom one ui not eyestrain ?
Impressive! Fingerprint scaner is working better then stock OneUI. Thank you!
DeHuMaNiZeD said:
Known issues:
High refresh rate
VoLTE/VoWiFi
Firmware upgrade instructions:
Get the latest firmware for your device here
Follow the provided instruction for flashing with Heimdall
Click to expand...
Click to collapse
In your personal opinion, will we ever see 120Hz working on Los for S20?
Prosafe said:
Exelent ROM for people like me that dislike oneui and all its bloatware. Beside that this rom work so mutch better then the current oneui4 that feels slow and sluggish compared with los12.
Thanks Sent from my Nokia 3310 exynos 5g
Click to expand...
Click to collapse
how about camera? quality is good? gcam compatible?
Darkstriker said:
In your personal opinion, will we ever see 120Hz working on Los for S20?
Click to expand...
Click to collapse
I cannot say.
I can confirm that 5G is NOT working on the ROM
Also, VOLTE, VOWIFI, and Google assistant responding to my voice, are all broken
Can I get the lineage os 19 rom. It says I need authorization
DeHuMaNiZeD said:
Firmware upgrade instructions:
Get the latest firmware for your device here
Follow the provided instruction for flashing with Heimdall
Click to expand...
Click to collapse
Thanks again to the team for your work.
I'm on G980FXXSCDUJ5 (S20 4G - x1s).
I was trying to upgrade to latest firmware G980FXXSCEUL9 before to load your 'lineage-19.0-20220111-UNOFFICIAL-x1s' but I have a problem.
According to me, two firmwares on your GitHub link are not corresponding to their designation:
-firmware-SM-G980F-G980FXXSCEUL9
-firmware-SM-G980F-G980FXXSCEUL7
(after download, sha256 hash controls are ok)
I've flashed these firmwares and the result for both is:
-G980FXXUCEUL6
-bootloader relocked
-On Download Mode screen, additional Japanese texts appear
I loaded back G980FXXSCDUJ5 from my datas.
Can you have a look ?
Thanks
seujo said:
Thanks again to the team for your work.
I'm on G980FXXSCDUJ5 (S20 4G - x1s).
I was trying to upgrade to latest firmware G980FXXSCEUL9 before to load your 'lineage-19.0-20220111-UNOFFICIAL-x1s' but I have a problem.
According to me, two firmwares on your GitHub link are not corresponding to their designation:
-firmware-SM-G980F-G980FXXSCEUL9
-firmware-SM-G980F-G980FXXSCEUL7
(after download, sha256 hash controls are ok)
I've flashed these firmwares and the result for both is:
-G980FXXUCEUL6
-bootloader relocked
-On Download Mode screen, additional Japanese texts appear
View attachment 5519777
I loaded back G980FXXSCDUJ5 from my datas.
Can you have a look ?
Thanks
Click to expand...
Click to collapse
Baseband version does not correspond to firmware upgrades. That means it doesnt need to be same as the firmware you flashed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project, with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub organization. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the changelog for a full list of changes & features.
Instructions :
https://wiki.lineageos.org/devices/gts4lv/install
https://wiki.lineageos.org/devices/gts4lvwifi/install
Downloads :
https://download.lineageos.org/gts4lv
https://download.lineageos.org/gts4lvwifi
GPL compliance :
https://github.com/LineageOS/android_kernel_samsung_sdm670
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel, or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Thank you very much for LineageOS 20! Tried the upgrade from 19.1 following this guide https://wiki.lineageos.org/devices/gts4lv/upgrade (including recovery and gapps). The upgrade process went ok, Android 13 is booting up but I dont have WIFI connection. The WIFI toggle in settings is OFF, if i switch it to ON it goes back to OFF when I close settings and open them again. Will try a factory reset in the next days.
Damned! Made a mistake! I used recovery and lineageos image for the LTE variant of S5E for my update instead of the WIFI variant. Now I made a factory reset and used the correct recovery and lineageos files for installation and it looks like WIFI is working (at least in the google setup wizzard I have WIFI now). Sorry for posting nonsense!
Do I really have to update the Recovery with Odin when going from 19.1 to 20? Isnt't it included in the update-ZIP?
rogers11 said:
Do I really have to update the Recovery with Odin when going from 19.1 to 20? Isnt't it included in the update-ZIP?
Click to expand...
Click to collapse
You can always flash it from fastbootd inside lineage recovery.
LuK1337 said:
You can always flash it from fastbootd inside lineage recovery.
Click to expand...
Click to collapse
I know how to do it from bootloader on other devices like “fastboot flash recovery ./recovery.img”. But how from Recovery itself?
rogers11 said:
I know how to do it from bootloader on other devices like “fastboot flash recovery ./recovery.img”. But how from Recovery itself?
Click to expand...
Click to collapse
advanced -> enter fastboot and then it's the same as with *real fastboot*.
LuK1337 said:
advanced -> enter fastboot and then it's the same as with *real fastboot*.
Click to expand...
Click to collapse
Got it. Thanks a lot.
BTW: A happy new year.
LuK1337 said:
advanced -> enter fastboot and then it's the same as with *real fastboot*.
Click to expand...
Click to collapse
Thank you LuK1337 for lineage os 20
Upgraded with twrp wipe cache and dalvik cache
Downloaded mind the gapps 13.0 installed linage 0s 20. Installed gapps installed magisk apk wipe cache dalvik cache re booted im rooted upgraded all good
Be sending you donation shortly thanks for you hard work god bless
Happy new year from Scotland UK.
Quick question:
Can I go from 18.1 directly to 20, or should I go to 19.1 and then to 20?
What is your--
LineageOS version: lineage-20.0-20230101-nightly-gts4lvwifi-signed
LineageOS Download url: https://mirrorbits.lineageos.org/fu...e-20.0-20230101-nightly-gts4lvwifi-signed.zip
Gapps version: MindTheGapps-13.0.0-arm64-20221025_100653
Did you--
wipe: Yes
restore with titanium backup: No
reboot after having the issue: Yes
Are you using--
a task killer: No
a non-stock kernel: No
other modifications: No
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Connecting my USB-C Ethernet adapter to the tablet does not cause the tablet to use it instead of the wifi. I get a green light on the adapter for power but there is no data transfer. USB OTG Checker app recognizes the adapter as an ethernet adapter and does not detect any issue when connected. Attached is a 60 second logcat portion from when I connected the adapter.
Edit: Doesn't seem like I can attach the file to the post. Here's a link to the file
H
LuK1337 said:
advanced -> enter fastboot and then it's the same as with *real fastboot*.
Click to expand...
Click to collapse
I've updated LOS from 20230101 to 20230102 via Updater some minutes ago but the Recovery was not updated (still showing 01.01.).
"Update Recovery" is enabled in the updater's settings. Is this a bug?
BTW, if moving from 19 to 20, can you update the recovery via fastboot? I thought you could moving 18 to 19.
Mobe1969 said:
BTW, if moving from 19 to 20, can you update the recovery via fastboot? I thought you could moving 18 to 19.
Click to expand...
Click to collapse
Look here.
Hi,
first of all thanks for the port.
I did a revert to stock and then a clean install but wifi dosen't seem to work.
BlackMambo90 said:
Hi,
first of all thanks for the port.
I did a revert to stock and then a clean install but wifi dosen't seem to work.
Click to expand...
Click to collapse
Nevermind that I'm just stupid. I found out today that I have the LTE version. After using the correct package everything works fine. 🫣
Installed and working perfectly, thanks so much.
bart3005 said:
Installed and working perfectly, thanks so much.
Click to expand...
Click to collapse
same here
Good job
Can you update from 19.1 to 20 by simply side loading via Apply from ADB in recovery without doing a factory reset? I'm using the wifi version .