Related
I flash my T-Mobile SDA II/HTC Hurricane with this tutorial --> http://forum.xda-developers.com/showthread.php?t=475286
ubrdave said:
do the same thing we did before, hold the camera button and it will show you a 3 colour screen. but this time it will say
need an I U(0)?
make sure you select Y. (youwont see a N) you might need to do this a few times to get it right.
Click to expand...
Click to collapse
I have strange problem. I can't see this f*ckin' "Y", I always see "N", I'll try hundred times, what I supposed to do know ?
Should I push one of buttons ?
Don't mind ...
Ok, I find answer on my own.
I supposed to push zero ("0") button.
Hi,
I have a galaxy note 2014 edition that has retail mode on, it was a demo ex. Is there anyway to remove this from the device? Maybe through factory reset with stock firmware or something? Have no idea how to do a factory reset with stock firmware if that works.
ClowneN86 said:
Hi,
I have a galaxy note 2014 edition that has retail mode on, it was a demo ex. Is there anyway to remove this from the device? Maybe through factory reset with stock firmware or something? Have no idea how to do a factory reset with stock firmware if that works.
Click to expand...
Click to collapse
Hi,
To do a factory reset: Switch off the tablet.
Then power it up by pressing simultaneously and holding : Volume up + Home + Power
When in Recovery mode move the cursor with the volume key and execute with the power key.
Select Factory reset and execute it.
Tilagoon said:
Hi,
To do a factory reset: Switch off the tablet.
Then power it up by pressing simultaneously and holding : Volume up + Home + Power
When in Recovery mode move the cursor with the volume key and execute with the power key.
Select Factory reset and execute it.
Click to expand...
Click to collapse
Factory reset doesnt seem to help for some reason. Its like its in the rom. Were can I find the stock rom and how do I put it in?
ClowneN86 said:
Factory reset doesnt seem to help for some reason. Its like its in the rom. Were can I find the stock rom and how do I put it in?
Click to expand...
Click to collapse
Have a look HERE it's for the S5 but it should something similar for the Note 2014.
Tilagoon said:
Have a look Here it's for the S5 but it should something similar for the Note 2014.
Click to expand...
Click to collapse
Ive done every step of that guide except flash with a stock rom since I dont know were to get it or how to flash the devicce.
ClowneN86 said:
Ive done every step of that guide except flash with a stock rom since I dont know were to get it or how to flash the devicce.
Click to expand...
Click to collapse
Hi,
OK, the first thing to know is which device you have: Sm-P600/601/605 ??
Then to know which ROM is installed on the tablet ?
If you can go to setting : then scroll down to "About the phone" you should see the version of the ROM.
With that you go to sammobile
You put your device type and you will get all the stock ROM's
You click on the one you want and on the next windows you will have the URL to download and the way to install it.
To be able to download the ROM you have to register on this site but it's free of charge !!
Tilagoon said:
Hi,
OK, the first thing to know is which device you have: Sm-P600/601/605 ??
Then to know which ROM is installed on the tablet ?
If you can go to setting : then scroll down to "About the phone" you should see the version of the ROM.
With that you go to
You put your device type and you will get all the stock ROM's
You click on the one you want and on the next windows you will have the URL to download and the way to install it.
To be able to download the ROM you have to register on this site but it's free of charge !!
Click to expand...
Click to collapse
Its a SM-P600,
Kernel Version: 3.4.39-1691324
Build Number: JSS15J.P600XXXUAMI8_LLK
I tried that site but canceled it cause it said it will take 15h to download the firmware.
You can try from HERE
But I am not sure it will be any faster.
Those ROM's are quite big > 1.xx Gb so if your internet connection is slow it's take time.
Tilagoon said:
You can try from HERE
But I am not sure it will be any faster.
Those ROM's are quite big > 1.xx Gb so if your internet connection is slow it's take time.
Click to expand...
Click to collapse
It seems to go a little bit faster today from sammobile. I have a 100/100 connection so it should go fast
Thanks for taking the time to help.
Tilagoon said:
You can try from
But I am not sure it will be any faster.
Those ROM's are quite big > 1.xx Gb so if your internet connection is slow it's take time.
Click to expand...
Click to collapse
Stock firmware solved everything so a big thanks to you!
ClowneN86 said:
Stock firmware solved everything so a big thanks to you!
Click to expand...
Click to collapse
Great :good: Good news , very happy you could make it work !! :good:
Tilagoon said:
Great :good: Good news , very happy you could make it work !! :good:
Click to expand...
Click to collapse
One more question, I can´t seem to set some kind of password for the lockscreen since the lock screen option is gone in some way. It says something about Knox but what is that?
Can i add some other app that handles the lock screen?
About Knox: it's some kind of security introduced by Samsung some months ago, a real pain in the back..
Have a look HERE (for example) for more details.
Yes you can install applications w/o problem.
Knox will only get involved when you start playing with the ROM's, Bootloader etc ..
Hi
Hello guys, I have an Galaxy S6 Edge Demo version, I want to know if I change the motherboard with another with GSM function, it will work fine ?
The digital finger print doesn't work, I have to change the button or how can I fix this ?
And another thing, in the background of display, you can barely notice a text, this : Samsung Galaxy S6 Edge, this thing is from display or motherboard ? Because I want to know, if I change the motherboard, it will dissapear that text ?
Thank you.
I would like to remove the starting screen ''Live demo unit'' on SM-T800X tablet to the stock one, and after flashing I have got the demo pieces of text in the bottom of the screen.
I tried to re-partition the install with ODIN and used a PIT file but no changes. Anybody can help with this problem please ? Is there any solution to change the demo unit to look as a stock SM-T800 ?
Also if there any solution to change KNOX value to 0 would be great.
Hardware buttons not working after the 4.1.0 update .
Only Touch ID is working . Nothing else.
Taran3105 said:
Hardware buttons not working after the 4.1.0 update .
Only Touch ID is working . Nothing else.
Click to expand...
Click to collapse
Also the volume keys are not working.
no brothers both the capacitive buttons and volume rockers work flawlessly on 4.1.0
all is working for me :-/
Working fine for me.
Working fine for me. Seems like a temp issue or a wrong flash to me. You can try wiping system and flash full zip. If you are fully stock, i would advise to perform a factory reset.
Taran3105 said:
Hardware buttons not working after the 4.1.0 update .
Only Touch ID is working . Nothing else.
Click to expand...
Click to collapse
Sounds like a firmware issue. I suggest a full reflash.
I did a clean flash 4.0.3&4.1.0 OTA. Sometimes pulling down the notifications doesn't darken the background.
Clean flash ..stop making up bs posts
I cannot launch Google Assistant by voice with the screen off, whereas I could before the update
croques said:
I cannot launch Google Assistant by voice with the screen off, whereas I could before the update
Click to expand...
Click to collapse
As i have been saying repeatedly, the OTAs from OnePlus suck.
Clean flash the full ROM.
andrneumann said:
I did a clean flash 4.0.3&4.1.0 OTA. Sometimes pulling down the notifications doesn't darken the background.
Click to expand...
Click to collapse
Please PM me if you ever find a fix for this.. it forced me to use another ROM
Never call it Touch ID... This is not Apple.
works fine here clean flash
azaidi said:
Please PM me if you ever find a fix for this.. it forced me to use another ROM
Click to expand...
Click to collapse
Clean flashed again, now with OOS full zip 4.1.0, same thing. Pulling down notifications not always darken the rest of the screen. Still looking for a fix.
Factory reset solved the problem.
croques said:
I cannot launch Google Assistant by voice with the screen off, whereas I could before the update
Click to expand...
Click to collapse
I could never do that
andrneumann said:
Clean flashed again, now with OOS full zip 4.1.0, same thing. Pulling down notifications not always darken the rest of the screen. Still looking for a fix.
Click to expand...
Click to collapse
Did u find anything?
having the same issue
guess very few are having this issue (not many reported)
Anyone who's shortcut to for example a document on the home screen doesn't work anymore?
I already deleted the shortcut and made a new one, but still doesn't work
Ronak Chandak said:
Did u find anything?
having the same issue
guess very few are having this issue (not many reported)
Click to expand...
Click to collapse
I have the same issue...
Just received this
Just got it here in Argentina.
EDIT just can't believe the Xiaomi ****ers took the DT2W function from us and never reinstated it.
slimshady76 said:
Just got it here in Argentina.
EDIT just can't believe the Xiaomi ****ers took the DT2W function from us and never reinstated it.
Click to expand...
Click to collapse
Oh no, seems like I have to stuck in version 10.0.10.0 forever ... :crying:
slimshady76 said:
Just got it here in Argentina.
EDIT just can't believe the Xiaomi ****ers took the DT2W function from us and never reinstated it.
Click to expand...
Click to collapse
Hopefully we will get it back with Android 10. I'm using superior os 10 till we get it.. so far it works pretty nicely.
Also got the update. The size looks ok for a simple security patch and minor fixes so nothing major.
Phone starts ok, no problems so far.
This is the first update that no one is complaining about yet... so it's a change in the right direction for the Xiaomi OTAs.
Xiaomi Mi A2 users (they got it 3 days earlier) said that it even works fine with Magisk.
I had 2 odd things happen as a result of installing this OTA.
1) USB Debugging was turned off. No other developer things seem to have changed, just that toggle was off.
2) My timezone was changed. Almost like the phone temporarily forgot I didn't want to use network-provided timezone (it often picks the neighbouring state, which has a 1-hour offset from here).
I've never had this happen with previous OTAs.
Hi, after updating device to November 1 patch device have no network signal. I can't call or receive calls. I have restored phone and still not working. Anyone with the same problem? What can I do to rollback to previous version? Thanks in advice
benropo said:
Hi, after updating device to November 1 patch device have no network signal. I can't call or receive calls. I have restored phone and still not working. Anyone with the same problem? What can I do to rollback to previous version? Thanks in advice
Click to expand...
Click to collapse
My dad didn't have this issue. Make sure it isn't your network provider having this problem
If you don't enroll your fingerprint before updating to v 10.0.16 ,you can't do it after the update
benropo said:
Hi, after updating device to November 1 patch device have no network signal. I can't call or receive calls. I have restored phone and still not working. Anyone with the same problem? What can I do to rollback to previous version? Thanks in advice
Click to expand...
Click to collapse
Hello, if someone is experiencing the same problem, I resolved it flashing the official stock rom with Miflash tool. Cheers
This update has definitely done something to the signal mine is falling onto 2G a lot, before that I was steady on 4G. Once it hits 2G it stays on it regardless of the signal strength until you restart the phone. It is very annoying.
After this update recent apps not working anymore. All apps are closing immediately, not minimizing. Does someone having the same issue?
Getting permanent SD card issues - "integrity check" notification after each unlock or even "incompatible card" message from time to time. Anyone else with this?
downloadonlyaccount said:
Getting permanent SD card issues - "integrity check" notification after each unlock or even "incompatible card" message from time to time. Anyone else with this?
Click to expand...
Click to collapse
This sounds like the known issue with new/fast cards. There's a thread where it was discussed.
vinylmeister said:
After this update recent apps not working anymore. All apps are closing immediately, not minimizing. Does someone having the same issue?
Click to expand...
Click to collapse
That's a problem that sometimes occurs since Pie came out. Restarting the mobile should fix it.
vinylmeister said:
After this update recent apps not working anymore. All apps are closing immediately, not minimizing. Does someone having the same issue?
Click to expand...
Click to collapse
My multitasking seems to be very bad after the update...
Hello,
I have Mi A2 lite with magisk installed, and I am unable to perform the november OTA update.
here is what I do:
1. In magisk : Uninstall > restore images
After doing this, magisk still looks the same:
2. Launch the OTA update.
I first have this screen:
red message translation: "Install will resume when the phone is not active. Click on resume to finish installation now"
3. Clicking on resume will start the installation, but it fails after some moment:
4. After that, I go back to Magisk: Install > Direst install to avoid having Magisk uninstalled after reboot. When doing this, here is the screen:
I don't understand why my OTA is refused...
Is there something to setup in magisk hide ? In order to hide magisk from the OTA updater ? or anything else ?
/system could have been modified, you can try flashing only that partition to solve the issue
nehuy said:
/system could have been modified, you can try flashing only that partition to solve the issue
Click to expand...
Click to collapse
Do you know where I can find the system image for 10.0.15 ? I was not able to find it in the threads, only boot images !
takhama said:
Do you know where I can find the system image for 10.0.15 ? I was not able to find it in the threads, only boot images !
Click to expand...
Click to collapse
The upgrade tool writes a log to logcat. It says which partition it does not like.
adb logcat | grep update_engine
There have been no fastboot image released for 10.0.15.0. I have backups of both system and vendor (since they both seem to be modified every OTA for me). If you can confirm that either of these is needed I can try to upload it somewhere. Note that these are very large partitions.
Alternatively, you could use the 10.0.13.0 fastboot and OTA from there. Make sure to backup data before doing this.
i recently flashed magisk on this phone through odin methodm it works. but my mobile network keeps resetting. i havenno idea why. as soon as i download something or do normal tasks it just diesm i haven no idea on what's going on.
UPDATE: this problem still exists after uninstalling magisk. what happened? i am gonna try to flash new firmware and see if something happens
Update: please someone help me. this is getting annoying i don't know what to do. please. i have finally found my perfect non laggy rom! which is stock. but the mobile data glitch is just... i attached the video below. please someone. if you want logs i can give
Your browser is not able to display this video.
Captain_cookie_200 said:
Update: please someone help me. this is getting annoying i don't know what to do. please. i have finally found my perfect non laggy rom! which is stock. but the mobile data glitch is just... i attached the video below. please someone. if you want logs i can give
View attachment 5691215
Click to expand...
Click to collapse
I connected my laptop to the hotspot while taking a class. and my mobile service just disspears as you can see
is someone gonna help me with this? i dont see anyone else having this problem. nor am i getting answers from anywhere. I am just stuck with unoptimised laggy GSI'S? rip me.
Hello mate sorry for the wait, https://forum.xda-developers.com/t/fixed-rooted-a325m-suddenly-no-imei-no-sim.4386753/post-86588571 here the solution, have a good day
i actually followed that tutorial deleting the imei many times but the problem always presisted. like 5-15 times
Same thing happening, also using the same phone. This is insane
Captain_cookie_200 said:
i actually followed that tutorial deleting the imei many times but the problem always presisted. like 5-15 times
Click to expand...
Click to collapse
I also followed the same tutorial, but the issue still persists.
Franzyy said:
Same thing happening, also using the same phone. This is insane
I also followed the same tutorial, but the issue still persists.
Click to expand...
Click to collapse
i would just recommend switching to GSI at this point if you really want the mobile data back. i dont think this is going to be fixed till the next firmware update. GSI fixes this. i am personally using crdroid 8.8 it works the smoothest out of all of them. the battery drain is an issue but i can live with it. i dont think samsung is going to push out a firmware update soon. i bet they dont even know this issue exists in the firmware. this is why i never wanted to go with a midranger from samsung. they dont care about us. well.
Captain_cookie_200 said:
i would just recommend switching to GSI at this point if you really want the mobile data back. i dont think this is going to be fixed till the next firmware update. GSI fixes this. i am personally using crdroid 8.8 it works the smoothest out of all of them. the battery drain is an issue but i can live with it. i dont think samsung is going to push out a firmware update soon. i bet they dont even know this issue exists in the firmware. this is why i never wanted to go with a midranger from samsung. they dont care about us. well.
Click to expand...
Click to collapse
For the battery drain you can try reset battery info with ACC, stratophere x performance or root essentials (deprecate)
Franzyy said:
Same thing happening, also using the same phone. This is insane
I also followed the same tutorial, but the issue still persists.
Click to expand...
Click to collapse
What did you do? it made my imei dead but the tutorial fix it.
Did you put the imei folder in RO and activate offline mode and flash stock?
kilam9900 said:
What did you do? it made my imei dead but the tutorial fix it.
Did you put the imei folder in RO and activate offline mode and flash stock?
Click to expand...
Click to collapse
I fixed it by installing a custom rom.
kilam9900 said:
For the battery drain you can try reset battery info with ACC, stratophere x performance or root essentials (deprecate)
Click to expand...
Click to collapse
can you link me to those and instructions?
Captain_cookie_200 said:
can you link me to those and instructions?
Click to expand...
Click to collapse
of course,
ACC u just have to select the number on the CLI, juste type acc on termux and select the option (if u have unzip error with the module, just unpack and repack)
Stratosphere : The module, just type su -c strpmenu in termux and choose the option for reset battery
Root essentials : The app, just install it and select the option
I think the best and easiest way is Stratosphere
(For all of this, you need to charge your phone at 100%)