Hi all,
post here Gcam version you are using.
I found and i am using this, without particular settings:
BSG 8.1 GVp Snapdragon Version
Choose this: MGC_8.1.101_A9_GVp_lib_snap.apk
Results are quiet well.
Hope to see yours. Cheers.
camera api2 preenable in device bro ???
no need enable manual ???
elzisaina said:
camera api2 preenable in device bro ???
no need enable manual ???,
Click to expand...
Click to collapse
Yes, enabled by default. Just install apk
HTCDevil said:
Yes, enabled by default. Just install apk
Click to expand...
Click to collapse
thanks bro... will test later, when i received my device..
Thanks for the link.
We are gratefull to the developers.
Just I tried it with video on rear camera.
I am not happy with it.
- The image stabilization doesn't working on it.
- There are issues barrel at super wide lens, the default xiaomi camera has a better algorithm (probably) that corrects the barel issue that normally have these lenses.
mlemod said:
Thanks for the link.
We are gratefull to the developers.
Just I tried it with video on rear camera.
I am not happy with it.
- The image stabilization doesn't working on it.
- There are issues barrel at super wide lens, the default xiaomi camera has a better algorithm (probably) that corrects the barel issue that normally have these lenses.
Click to expand...
Click to collapse
If you try any other build, please post it. Thanks for your feedback
Sure!
There is an upload video on youtube about this .apk on Mi 11 Lite.
The version is 8.1.101.345618084 the same like us.
The compared photos seems the good work of GCam.
If you see at the end (07:55) the video image stabilization of GCam is wrong.
I have tried the following, but I have some crashed all the time:
GCam_7.3.018_Urnyx05-v2.5.apk
PXv8.1_GCam-v1.2.apk
Big bugs in Gcam
Any update?
Hello at all.
Anyone use gcam 8.2 with specific settings for macros and 64mpx?
Thank you!
HTCDevil said:
Hi all,
post here Gcam version you are using.
I found and i am using this, without particular settings:
BSG 8.1 GVp Snapdragon Version
Choose this: MGC_8.1.101_A9_GVp_lib_snap.apk
Results are quiet well.
Hope to see yours. Cheers.
Click to expand...
Click to collapse
Have cong?
For the time being I use:
MGC_8.3.252_V0e_MGC.apk
Ultrawide lens not supported, video slow-motion crashes the app, don't know about video stabilization...
UniNick said:
For the time being I use:
MGC_8.3.252_V0e_MGC.apk
Ultrawide lens not supported, video slow-motion crashes the app, don't know about video stabilization...
Click to expand...
Click to collapse
Why use the 8.3? Its in beta so a lot of stuff doesnt work. Use MGC 8.1 the latest stable version. You can also use a config to make everything work including slow-mo.
akicarkralj said:
Why use the 8.3? Its in beta so a lot of stuff doesnt work. Use MGC 8.1 the latest stable version. You can also use a config to make everything work including slow-mo.
Click to expand...
Click to collapse
Thanx 4 the advice - I didn't really search yet, but this helped to find a good version!
I just installed and it looks like everything except slow-mo works even without a config.
Which config do you use?
UniNick said:
Thanx 4 the advice - I didn't really search yet, but this helped to find a good version!
I just installed and it looks like everything except slow-mo works even without a config.
Which config do you use?
Click to expand...
Click to collapse
Think you should be able to load this into the app. I got it from the BSG gcam telegram. If you dont like 16:9 you can just change it from the dropdown settings menu quickly.
Thanks a lot for the config.xml.
Actually I'm not able to load it inside the app. I made a folder GCam/Configs8 and put the xml inside - however when I double tap near the cam shutter button, the import dialog doesn't show?
Maybe it's the Gcam version, I downloaded the one from the first post here.
UniNick said:
Thanks a lot for the config.xml.
Actually I'm not able to load it inside the app. I made a folder GCam/Configs8 and put the xml inside - however when I double tap near the cam shutter button, the import dialog doesn't show?
Maybe it's the Gcam version, I downloaded the one from the first post here.
Click to expand...
Click to collapse
Use THIS link to download the newest version. Download any of the 3 first apk. If it helps I usually use ENG apk but snap also works fine. It should have an option to add custom xml files in the settings. Just point it to the folder where its located (can be anywhere on the phone).
Great, that was the solution.
I'm very happy to have a fully functional Gcam on my phone now.
Thanks again!
TrCam here. Works fine
Tigr GCam APKs - Google Camera Port
Modified Google Camera app by tigr.
www.celsoazevedo.com
Here, try some of theese
Related
For Android 9 only.
Download: https://drive.google.com/file/d/1xiWoktC_T_fnTOBeSNENWGwLQd2WJNMp/view?usp=drivesdk
If you try to install Arnova's version, it will fail due to conflicts with the original GCam. This is just a cloned app that can be installed on Pixel/Pixel XL.
All credit goes to @Arnova8G2. All bugs/functionality from that app are also present here.
Link to the original thread:
https://forum.xda-developers.com/showpost.php?p=77855579&postcount=2426
Arnova's version has some of the pixel 3 functionality enabled for other phones (like portrait mode and focal length changing after taking a portrait mode photo). If you install the non moded version, you don't get portrait mode or h256 encoding for videos (and more).
None of the v6 based moded gcam apps currently available work on Pixel due to their manifest being the same as the original "play store" version of gcam which comes preinstalled on pixels.
This forces an update of the original app, update which fails as it recognizes that the moded version is not really a qualified upper version of the original one
Cannot work on my Pixel XL running Stock pie
Thanks for doing this!
Even though I can install it, it says the following:
"Clones are device-locked
This helps to prevent abuse and redistribution of cloned apps.
Please use App Cloner to recreate the clone on this target device Clones created with commercial use business license may still be installed on different target devices."
And closes after accepting the dialog
Getting the same error when installing "Clones are device-locked
This helps to prevent abuse and redistribution of cloned apps.
Please use App Cloner to recreate the clone on this target device Clones created with commercial use business license may still be installed on different target devices."
I used App Cloner to clone the app myself and it worked!
However the app heated my phone quite a bit, and the picture viewer was quite janky.
Hope they improve the port with the next version!
I'm on Pixel XL btw
OSantal said:
I used App Cloner to clone the app myself and it worked!
However the app heated my phone quite a bit, and the picture viewer was quite janky.
Hope they improve the port with the next version!
I'm on Pixel XL btw
Click to expand...
Click to collapse
Can i just ask how you did that, i tried but it didnt work
Sarim26 said:
Can i just ask how you did that, i tried but it didnt work
Click to expand...
Click to collapse
1)Download de original apk
2)Get App Cloner on the play store
3)Find APK by file
4)Select the previously downloaded APK
5)Clone
Hope it helps!
OSantal said:
1)Download de original apk
2)Get App Cloner on the play store
3)Find APK by file
4)Select the previously downloaded APK
5)Clone
Hope it helps!
Click to expand...
Click to collapse
When i do that, it says error please select an original app not a cloned app
Sarim26 said:
When i do that, it says error please select an original app not a cloned app
Click to expand...
Click to collapse
I meant the original file from arnova
OSantal said:
1)Download de original apk
2)Get App Cloner on the play store
3)Find APK by file
4)Select the previously downloaded APK
5)Clone
Hope it helps!
Click to expand...
Click to collapse
I follow your guide, it works great. But the quality is very low compared to the original camera.
I'm using several different versions of GCam6 but all have something that doesn't work...
I'm using a version that @cstark27 posted here https://forum.xda-developers.com/showpost.php?p=77870655&postcount=2586
He says it's version that doesn't contain all the mods made for Oneplus 6. Almost everything works on this version. Portrait back camera doen't work (only front camera), tried night mode didn't see any difference (even the shutter and iso of pictures where the same with or without night mode). Full zoom works and camera is a bit jerky because it has continues auto focus (when you tap an object) activated.
I'm also using the latest versions of @Arnova8G2. This one compared with the @cstark27 version, portrait works fine with back camera but slow motion crashed the app.
I just hope that some dev could make a Camera mod like the one from NX Camera. A port directed to all Pixels with all the good stuff from Pixel 3.
onesolo said:
I'm using several different versions of GCam6 but all have something that doesn't work...
I'm using a version that @cstark27 posted here https://forum.xda-developers.com/showpost.php?p=77870655&postcount=2586
He says it's version that doesn't contain all the mods made for Oneplus 6. Almost everything works on this version. Portrait back camera doen't work (only front camera), tried night mode didn't see any difference (even the shutter and iso of pictures where the same with or without night mode). Full zoom works and camera is a bit jerky because it has continues auto focus (when you tap an object) activated.
I'm also using the latest versions of @Arnova8G2. This one compared with the @cstark27 version, portrait works fine with back camera but slow motion crashed the app.
I just hope that some dev could make a Camera mod like the one from NX Camera. A port directed to all Pixels with all the good stuff from Pixel 3.
Click to expand...
Click to collapse
My Pixel 3 will be here in a couple of weeks. I want to try to continue Camera NX's legacy.
cstark27 said:
My Pixel 3 will be here in a couple of weeks. I want to try to continue Camera NX's legacy.
Click to expand...
Click to collapse
Thkx in advance!!! Hope u succeed
damn i thought i was going to get the full pixel 3 camera with portrait onto my pixel xl ;-[
Is anyone else getting a warm/yellow tint on portrait mode?
Also, I can't night light mode, is it on developer settings?
Many thkx for the new version of Gcam6 @cstark27 !!!
Night mode was added and works pretty fine on my pixel!!!
Are u going to add Selfie Mode and Motion Photos to it in the future?? Hope so...
Do you have a specific thread for this apk modification?
https://www.xda-developers.com/google-pixel-night-sight-google-camera-review/
https://www.androidfilehost.com/?fid=11410932744536985875
onesolo said:
Many thkx for the new version of Gcam6 @cstark27 !!!
Night mode was added and works pretty fine on my pixel!!!
Are u going to add Selfie Mode and Motion Photos to it in the future?? Hope so...
Do you have a specific thread for this apk modification?
https://www.xda-developers.com/google-pixel-night-sight-google-camera-review/
https://www.androidfilehost.com/?fid=11410932744536985875
Click to expand...
Click to collapse
That's great news! But I am personnally waiting for Camera NX.
Yousvel said:
That's great news! But I am personnally waiting for Camera NX.
Click to expand...
Click to collapse
I've doubt that it will return...
And that camera was made to be functional on 6P
onesolo said:
I've doubt that it will return...
And that camera was made to be functional on 6P
Click to expand...
Click to collapse
Test this one if you don't mind.
-Enable Lens button
-Try to force enable Motion, Portrait
P3v2_GoogleCamera_6.1.013.apk
cstark27 said:
Test this one if you don't mind.
-Enable Lens button
-Try to force enable Motion, Portrait
P3v2_GoogleCamera_6.1.013.apk
Click to expand...
Click to collapse
Portait mode will take a picture but but not a Portrait picture.
hi, sorry for my stupid question.
i just want to know, can i install gcam mod on realme 3?
thank for the answer
I've heard that this version from Arnova8G2 works:
- MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun_2.apk
You need to load this config: Realme_3_Config.xml (guide: how to load config files).
I don't have this phone, so I don't know if it comes with the camera2 api enabled. If it's disabled, you have to enable it first. I'm sure you can find a guide by searching online.
You can also find more apks from Arnova8G2 on this page and follow his thread here on XDA.
Wanyi said:
hi, sorry for my stupid question.
i just want to know, can i install gcam mod on realme 3?
thank for the answer
Click to expand...
Click to collapse
camera to API is enabled in Realme 3, so yes u can install gcam mod on realm 3.
S4turno said:
I've heard that this version from Arnova8G2 works:
- MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun_2.apk
You need to load this config: Realme_3_Config.xml (guide: how to load config files).
I don't have this phone, so I don't know if it comes with the camera2 api enabled. If it's disabled, you have to enable it first. I'm sure you can find a guide by searching online.
You can also find more apks from Arnova8G2 on this page and follow his thread here on XDA.
Click to expand...
Click to collapse
Warm thanks for your post!
I was testing 1.3c version on my new phone, but it was fail taking photo.
Only panorama and video were operating.
But, today I installed the configs file and now camera is fully operating.
After first HDR tests and quick analysis stock camera render better (Chroma boost disabled, not needed!).
(I use a standardized position from my seat to a sunny open door in the middle of the room. )
I already tested panorama in outside situation and it is GREAT, much better than stock.
Not tested night and video.
Overall comment: This phone is a top gun. No need to spend million.
Just waiting for usable root.
but whenever i click on the video button it closes the app
vneetwagh said:
but whenever i click on the video button it closes the app
Click to expand...
Click to collapse
From installed application and Gcam configs given at @S4turno post everything working perfect on (RMX1821).
TESTED:
Photo/video/panorama( outstanding)/night sight also.
Thanks to him again.
About gcam in real me 3
lolo9393 said:
From installed application and Gcam configs given at @S4turno post everything working perfect on (RMX1821).
TESTED:
Photo/video/panorama( outstanding)/night sight also.
Thanks to him again.
Click to expand...
Click to collapse
NO bro video is not working in both the cameras I don't know why even though i installed the configs but its not working if yours are working can you send the video sample and settings for that.
shashanksasi said:
NO bro video is not working in both the cameras I don't know why even though i installed the configs but its not working if yours are working can you send the video sample and settings for that.
Click to expand...
Click to collapse
You do believe me. I just use the provided configs file as it is.
May be something related to the phone model. Mine is RMX 1821 (global Helio P60 version sold out of INDIA)
Hey guys thanks for the configs and apk! But after updating my os to colouros 6 rmx1821 ex 11a.14 the video mode no longer works portrait mode also gives a black image if there is more than one person in the picture. Does anyone have a modified config for this update?
Need help about crashing video mode on realme 3
I need ur help guys. I have installed gcam version MGC_6.1.021_BSG_Arnova-based_v.1.3d_TlnNeun_2.apk.
In my realme 3. I have also installed realme 3 config.xml configuration file in gcam. After that the gcam is working full fine with all the functions. But after the latest update of March 2019 Android security patch and fix of some minor issues. The video mode of google camera is not working. When I open the video tab. Gcam automatically closes. When I do repeat. It also do the same every time.
I've also tried to install various apks of gcam version 6 but all those are show the exact same problem when open the video mode. Please anyone suggest me the fix of this issue ???. I will be very thankful to u guys.
Regards.
---------- Post added at 04:17 AM ---------- Previous post was at 04:16 AM ----------
lolo9393 said:
Warm thanks for your post!
I was testing 1.3c version on my new phone, but it was fail taking photo.
Only panorama and video were operating.
But, today I installed the configs file and now camera is fully operating.
After first HDR tests and quick analysis stock camera render better (Chroma boost disabled, not needed!).
(I use a standardized position from my seat to a sunny open door in the middle of the room. )
I already tested panorama in outside situation and it is GREAT, much better than stock.
Not tested night and video.
Overall comment: This phone is a top gun. No need to spend million.
Just waiting for usable root.
Click to expand...
Click to collapse
Thanks man
harischeong said:
Hey guys thanks for the configs and apk! But after updating my os to colouros 6 rmx1821 ex 11a.14 the video mode no longer works portrait mode also gives a black image if there is more than one person in the picture. Does anyone have a modified config for this update?
Click to expand...
Click to collapse
Bro i also have the same problem with my realme 3. After the update, the video mode on gcam doesn't working. If u got the solution. Also help me.
Good news, I have found a working config for the latest update. You first have to download the apk from
https://www.celsoazevedo.com/files/android/google-camera/dev-fu24/#apk873
This is the apk called "fu24: MGC_6.1.021_BSG_Arnova_TlnNeun_4lens_V1.3.030119.0645-02j.apk". Then use these configs I attached.
Night mode, portrait mode, video , slowmo are working.
harischeong said:
Good news, I have found a working config for the latest update. You first have to download the apk from
https://www.celsoazevedo.com/files/android/google-camera/dev-fu24/#apk873
This is the apk called "fu24: MGC_6.1.021_BSG_Arnova_TlnNeun_4lens_V1.3.030119.0645-02j.apk". Then use these configs I attached.
Night mode, portrait mode, video , slowmo are working.
Click to expand...
Click to collapse
Bro Thanks for the post. But the problem still doesn't solve. Every thing is working fine but the video is in 720p. But if we switch into 1080p, the gcam stops and automatically closes like the previous one. If u have this problem, plz anybody fine the solution or any modified config.xml file for this problem.??
Thanks.
Does our phone supports video recording with 60fps? If yes what app?
yametekudasai said:
Does our phone supports video recording with 60fps? If yes what app?
Click to expand...
Click to collapse
Yes 60 fps is recording in this config. I don't judge the result.
harischeong said:
Good news, I have found a working config for the latest update. You first have to download the apk from
https://www.celsoazevedo.com/files/android/google-camera/dev-fu24/#apk873
This is the apk called "fu24: MGC_6.1.021_BSG_Arnova_TlnNeun_4lens_V1.3.030119.0645-02j.apk". Then use these configs I attached.
Night mode, portrait mode, video , slowmo are working.
Click to expand...
Click to collapse
Thanks for this configuration !
Everything is working in good day lights
But, both back and front camera's performance is very poor( like a 2mp camera) in LOW Lights and ARTIFICIAL Lights.
Kindly fix this issue !
Try this apk
lolo9393 said:
Warm thanks for your post!
I was testing 1.3c version on my new phone, but it was fail taking photo.
Only panorama and video were operating.
But, today I installed the configs file and now camera is fully operating.
After first HDR tests and quick analysis stock camera render better (Chroma boost disabled, not needed!).
(I use a standardized position from my seat to a sunny open door in the middle of the room. )
I already tested panorama in outside situation and it is GREAT, much better than stock.
Not tested night and video.
Overall comment: This phone is a top gun. No need to spend million.
File name
MCG_6.1.021_F1_V1.7.apk
Click to expand...
Click to collapse
Is anybody listening to this thread...kindly solve my previous issue of not working Google camera
working version 6 gcam for realme 3
Sachin Juni said:
Is anybody listening to this thread...kindly solve my previous issue of not working Google camera
Click to expand...
Click to collapse
Sachin Juni this post has the correct version. working for me. video, portrait, night mode etc are working
https://forum.xda-developers.com/showpost.php?p=79737387&postcount=4
harischeong said:
Sachin Juni this post has the correct version. working for me. video, portrait, night mode etc are working
https://forum.xda-developers.com/showpost.php?p=79737387&postcount=4
Click to expand...
Click to collapse
Thanks harischeong! Your Google camera is working good in daylight but it takes pictures only in 8mp.
I have already found the best one which clicks pictures with full 13 mp on both front and back camera. (Use Nexus 6p on both cameras for better photos and You can change some settings as per your understanding)
Here we go : https://f.celsoazevedo.com/file/cfiles/gcm1/Gcam_6.1.021_Advanced_V1.6.190614.0200.apk
---------- Post added at 09:22 AM ---------- Previous post was at 09:18 AM ----------
harischeong said:
Sachin Juni this post has the correct version. working for me. video, portrait, night mode etc are working
https://forum.xda-developers.com/showpost.php?p=79737387&postcount=4
Click to expand...
Click to collapse
Thanks harischeong for the link. That google camera takes only 8 mp pictures.
I already have the best which clicks with full 13 mp on both back and front cameras. ( Change settings as per your understanding or leave it).
Here we go :
https://f.celsoazevedo.com/file/cfiles/gcm1/Gcam_6.1.021_Advanced_V1.6.190614.0200.apk
Hello everyone!
Thanks to marlin-ku from celsoazevedo brandnew Gcam 7.0.009 is available for our Xiaomi A2 Lite. Additionally to most other versions the front cam is finally working in HDR-mode.
Here you go:
https://www.celsoazevedo.com/files/android/google-camera/dev-marlin-ku/#apk1134
Cappucinto said:
Hello everyone!
Thanks to marlin-ku from celsoazevedo brandnew Gcam 7.0.009 is available for our Xiaomi A2 Lite. Additionally to most other versions the front cam is finally working in HDR-mode.
Here you go:
https://www.celsoazevedo.com/files/android/google-camera/dev-marlin-ku/#apk1134
Click to expand...
Click to collapse
It's not working in hdr+ or hdr++ on stock 10.0.14.0.
It's working on 10.0.13.0 flawlessly!
You have camera2 api enabled?
Cappucinto said:
It's working on 10.0.13.0 flawlessly!
You have camera2 api enabled?
Click to expand...
Click to collapse
Yes, enabled. Back camera Ok, but front not talking pictures in hdr. Stock 10.0.14.0, magisk 19.4 and butterfly kernel.
---------- Post added at 06:41 PM ---------- Previous post was at 06:36 PM ----------
Cappucinto said:
It's working on 10.0.13.0 flawlessly!
You have camera2 api enabled?
Click to expand...
Click to collapse
And without camera2 api any gcam will crash.
Forgot about that, you're right!
This is beyond strange, still working for me. Try to take another picture with front camera and check like a minute later if the pic is showing in your gallery. It takes a bit for our A2 to proceed the selfie. If it's still not working idk?
Cappucinto said:
Forgot about that, you're right!
This is beyond strange, still working for me. Try to take another picture with front camera and check like a minute later if the pic is showing in your gallery. It takes a bit for our A2 to proceed the selfie. If it's still not working idk?
Click to expand...
Click to collapse
Still no luck. Can take picture in normal mode, not in hdr. Have you changed any settings, developer settings?
Does the focus on Android Pie work?
10.0.14.0 HDR not working on the front facing camera, everything else works I believe. Also i think there was a version that could shot 1080 60fps video, not really sure, this version only shots at 30 fps. Thanks for the apk!!
the focus is very unstable
On my phone it won't even install, even though I have camera2 api. Other GCam's (version 5 and 6) do work.
It is this one, right? GCam_7.0.009_A_005.apk
IkkeZelf1000 said:
On my phone it won't even install, even though I have camera2 api. Other GCam's (version 5 and 6) do work.
It is this one, right? GCam_7.0.009_A_005.apk
Click to expand...
Click to collapse
you have to uninstall one the versions you have installed then you try installing again.. it conflicts with the existing one you have installed.. I'm sure it's the v5
Try and see
kennyking_1 said:
you have to uninstall one the versions you have installed then you try installing again.. it conflicts with the existing one you have installed.. I'm sure it's the v5
Try and see
Click to expand...
Click to collapse
Indeed, after uninstalling both the V5 and V6 GCam, it worked. Thanks!
Too bad i have to manually switch HDR off when using the front cam, and back on again when using the back cam.
There are focus issues as usual. If someone can specifically build a GCam version for Mi A series, that would be great.
video working for anyone using the aforementioned GCam ?
IZO6 said:
video working for anyone using the aforementioned GCam ?
Click to expand...
Click to collapse
Working RR
testing on 10 GSI now
edit: installs, but crashes on startup
I heard there is astronomy photography feature(cuttlefish mode) in gcam v.7. But with this version I cant find one though there are several options "camera.cuttle.something" in the developer options. Anybody knows about it?
Hi guys,
Is there a way to save picture on sdcard ?
Excalib3r said:
I heard there is astronomy photography feature(cuttlefish mode) in gcam v.7. But with this version I cant find one though there are several options "camera.cuttle.something" in the developer options. Anybody knows about it?
Click to expand...
Click to collapse
just search it
ledio456920 said:
just search it
Click to expand...
Click to collapse
I didn't meant the settings thing, i want the feature, while shooting in night mode there should be the cuttlefish mode, this mode have a very long exposure time like 1 min or so and u have to keep the phone steady for that time. This mode ultimately create more sharper image than the previous night mode, also can detect stars.
Hello everyone,
Does anyone know if there will be GCam port for S10 Lite? I don't think there will be any development for this phone but a gcam port will be great.
And does anybody know if any port works currently with at least the main and front camera. Can you please share the link?
Thank you.
Update - I got the S10 version working ??
GCam
ammarwajihi said:
Hello everyone,
Does anyone know if there will be GCam port for S10 Lite? I don't think there will be any development for this phone but a gcam port will be great.
And does anybody know if any port works currently with at least the main and front camera. Can you please share the link?
Thank you.
Update - I got the S10 version working ??
Click to expand...
Click to collapse
Please provide the link for Gcam
GCam S10 Lite https://www.teamandroid.com/2020/02/01/google-camera-galaxy-s10-lite/
I can't get any of these ports to work with the ultra wide camera.
and is there any way to get hdr video recording?
Same here. Half the things are not working on any port at the moment. I am also waiting for a stable gcam.
Do you at least see improvements with the main camera when using gcam in comparison to the stock ones ?
vadergr said:
Do you at least see improvements with the main camera when using gcam in comparison to the stock ones ?
Click to expand...
Click to collapse
Yes, a lot
For s20 there is an update, gcam 7.3
Is there 7.3 for s10 lite? Perhaps anyone tried 7.3 from s20, does it work in s10 lite?
---------- Post added at 03:08 PM ---------- Previous post was at 02:46 PM ----------
I tried 7.3 from here:
https://www.cyanogenmods.org/download-google-camera-for-galaxy-s10-lite-gcam-7-3/
It is working except night mode. But neither 7.2 night mode was working to me..
I don't know which is better.
Tried the 7.3, there's no so much difference IMHO in comparison with stock camera. Daytime stock is better ; low light can't see great improvement.
Camera quality isn't so bad, of course if you shoot in low light ambient results are far from the Pixel 4 and latest iPhone.
Okay so i stumbled upon a working build. It's latest stable from Arnova. Everything works out of the box(for pics, haven't tested videos yet) with the latest fw for s10 lite. No tweaking needed.
Here's the link.
https://www.celsoazevedo.com/files/android/google-camera/f/changelog1072/
Night mode with astrophotography works and the results are just awesome. Give it a try guys.
shavendum said:
Okay so i stumbled upon a working build. It's latest stable from Arnova. Everything works out of the box(for pics, haven't tested videos yet) with the latest fw for s10 lite. No tweaking needed.
Here's the link.
https://www.celsoazevedo.com/files/android/google-camera/f/changelog1072/
Night mode with astrophotography works and the results are just awesome. Give it a try guys.
Click to expand...
Click to collapse
Thanks. Did you use any xml file?
sosimple said:
Thanks. Did you use any xml file?
Click to expand...
Click to collapse
Nope. Didn't have to. Just installed and done.
Have you found any mod with ultra wide camera support?
The latest version of Arnova8G2 is working fine for me. Follow the link for those who want to test.
https://f.celsoazevedo.com/file/cfiles/gcm1/GCam_5betaFinal.200510.2111build-7.3.020.apk
Edu_Campos said:
The latest version of Arnova8G2 is working fine for me. Follow the link for those who want to test.
https://f.celsoazevedo.com/file/cfiles/gcm1/GCam_5betaFinal.200510.2111build-7.3.020.apk
Click to expand...
Click to collapse
Ultra wide working for you?
ammarwajihi said:
Ultra wide working for you?
Click to expand...
Click to collapse
You have to find an option to turn on the wide angle, it's in advanced settings.
I'm currently using an Urnyx05 version. I also use a "Lib patcher" where I turned up sharpness a bit.
manfred18 said:
You have to find an option to turn on the wide angle, it's in advanced settings.
I'm currently using an Urnyx05 version. I also use a "Lib patcher" where I turned up sharpness a bit.
Click to expand...
Click to collapse
Installed Urnyx gcam and turned on the ultra wide option but when I click on 0.6x the app crashes and doesn't open.
How did you make it work?
ammarwajihi said:
Installed Urnyx gcam and turned on the ultra wide option but when I click on 0.6x the app crashes and doesn't open.
How did you make it work?
Click to expand...
Click to collapse
Same here.. Also I'm not sure if there is any improvement vs the original camera. Both looks almost the same to me.
ammarwajihi said:
Installed Urnyx gcam and turned on the ultra wide option but when I click on 0.6x the app crashes and doesn't open.
How did you make it work?
Click to expand...
Click to collapse
I don't know, I've installed Urnyx's 7.2.010 v2.3 version and it works.
It's slightly better. Samsung app makes everything oversharpened and flat for me.
I've found new version which fits me most.
I was looking for a 6.x version that works on our S10 LIte. For me the 7.x mods are ok, but nothing special.
Gcam 6.x was much smoother.
Finally - I've found Fu24's mod.
It's the "Gcam_6.1.021_Advanced_V1.6-Fu24_5Lens-02b6.5-A10.apk" file.
It's full of advanced settings, there are some configs available.
Here you have some samples.
I was using stock config + Pixel 2 XL setting for back camera.
Later I've switched to LGV40 config.
Hi Guys! Is there any GCam that working for Redmi Note 12 Turbo?
Or any compatible Gcam for Redmi Note 12 Turbo
use AGC8.4 by Bigkaka. And you will need a config for Mi12S ultra(yeah thats weird) to make it working
Using AGC8.4 will still FC when you use the front cam. You can fix it (make front cam stable) by changing the Lens settings of the front cam (System ID = 1). For now, avoid using the front cam. If it FCs, just open the app again and quickly use any rear facing cam or switch to video.
Raymond.William said:
use AGC8.4 by Bigkaka. And you will need a config for Mi12S ultra(yeah thats weird) to make it working
Click to expand...
Click to collapse
Does this have 4k 60fps video?
AGC8.4.300_V9.2_fix2.apk by BigKaka and jerbau-front_cam_103130.agc config works for me. I tested all 4 lenses and videorecording for maincam (4k60) No fc
xuxu1 said:
AGC8.4.300_V9.2_fix2.apk by BigKaka and jerbau-front_cam_103130.agc config works for me. I tested all 4 lenses and videorecording for maincam (4k60) No fc
Click to expand...
Click to collapse
Hi there... Can you bring the jerbau config here? Thanks before
I dont know If I'm allow to do so. But @jerbau is also here so maybe he will release. Otherwise you can find the config in the Poco f5 gcam telegram group
xuxu1 said:
I dont know If I'm allow to do so. But @jerbau is also here so maybe he will release. Otherwise you can find the config in the Poco f5 gcam telegram group
Click to expand...
Click to collapse
Oh, it's okay. I think i'll better wait for the release. Thanks before
Hi, if you are interested I have a partial config that I hope to complete sometime soon. You should be able to use all camera modules in normal mode. The front cam has portrait mode. You also can shoot 4K 60fps without any issue using the rear main cam.
Just rename the file (jerbau-marble-partial.agc.xml) to have a .agc file extension (remove .xml at the end).
Just let me know if you have any concerns.
jerbau said:
Hi, if you are interested I have a partial config that I hope to complete sometime soon. You should be able to use all camera modules in normal mode. The front cam has portrait mode. You also can shoot 4K 60fps without any issue using the rear main cam.
Just rename the file (jerbau-marble-partial.agc.xml) to have a .agc file extension (remove .xml at the end).
Just let me know if you have any concerns.
Click to expand...
Click to collapse
Wow... The gcam config creator... I'm really-really-really appreciating of your reply, mr/sir.
I would like to say big thanks for your share
*Update*
I've test it, and it's really work. No FC. Thank you very much again and again.
jerbau said:
Hi, if you are interested I have a partial config that I hope to complete sometime soon. You should be able to use all camera modules in normal mode. The front cam has portrait mode. You also can shoot 4K 60fps without any issue using the rear main cam.
Just rename the file (jerbau-marble-partial.agc.xml) to have a .agc file extension (remove .xml at the end).
Just let me know if you have any concerns.
Click to expand...
Click to collapse
It just works, big thanks man
jerbau said:
Hi, if you are interested I have a partial config that I hope to complete sometime soon. You should be able to use all camera modules in normal mode. The front cam has portrait mode. You also can shoot 4K 60fps without any issue using the rear main cam.
Just rename the file (jerbau-marble-partial.agc.xml) to have a .agc file extension (remove .xml at the end).
Just let me know if you have any concerns.
Click to expand...
Click to collapse
Hi @jerbau ,
thx a lot. The configuration works, until now I got no FCs.
But a few concerns.
The main camera looks like it is always some kind of zoomed in comparison to the original camera app even though the selection is set to 1x.
And the second one, the frontcam produces some kind of really wired images when taking a selfie and HDR or HDR+ is activated. It looks almost like some kind of "comic filter" gets put over the pictures .
Is there any chance to sort this out?
This is a more stable config. Please evaluate and check if this works out for you. Remember to rename file extension to .agc
Tested to work on AGC v8.4.
jerbau said:
This is a more stable config. Please evaluate and check if this works out for you. Remember to rename file extension to .agc
Tested to work on AGC v8.4.
Click to expand...
Click to collapse
It works!! Thank you. With the last config it's the first gcam that that doesn't FC in my phone but also it works flawlessly, amazing work. Also speaking about the photos they have a lot more detail thant the default miui camera.
Thanks
bmwbasti said:
Hi @jerbau ,
thx a lot. The configuration works, until now I got no FCs.
But a few concerns.
The main camera looks like it is always some kind of zoomed in comparison to the original camera app even though the selection is set to 1x.
And the second one, the frontcam produces some kind of really wired images when taking a selfie and HDR or HDR+ is activated. It looks almost like some kind of "comic filter" gets put over the pictures .
Is there any chance to sort this out?
Click to expand...
Click to collapse
Hi @jerbau,
many thanks, the configuration looks good
The zoom is gone and frontcam looks way better, even with activated HDR.
Some minor flaw: For me the macro lense wasn't activated. I only had the choice of backcamera and the ultrawide.
Regards
Basti
bmwbasti said:
Hi @jerbau,
many thanks, the configuration looks good
The zoom is gone and frontcam looks way better, even with activated HDR.
Some minor flaw: For me the macro lense wasn't activated. I only had the choice of backcamera and the ultrawide.
Regards
Basti
Click to expand...
Click to collapse
You can enable it through the app settings (lens configuration), but being honest, the macro camera is sort of pointless.
jerbau said:
This is a more stable config. Please evaluate and check if this works out for you. Remember to rename file extension to .agc
Tested to work on AGC v8.4.
Click to expand...
Click to collapse
your config is fantastic, thanks for your work.
With the old "mi" one, recording video in 4k60 is possible, with yours only 4k30.
Hi guys.
Sharing another config of papaji here (version 6)
Changelog:
Fixed the Watermark
Disabled focus tracking as it becomes buggy and messes up focusing sometimes
Added awb to all lenses (not needed in most cases but you can try enabling at times stock awb is giving a yellow/green tint, it might fix it)
Experimental config (version 7)
Changelog:
Changes mostly in colour and white balance and front camera
Share your feedback. Thanks!
Remember to import these configs after renaming the filename with the extension .agc first.
One small question thou and I'm getting my Gcam from Gcam Hub.
Is it better to use the AGC_8.4.300_V9.7 or use AGC_8.4.300.18_V9.2 ?