Develop Bugs

[SOLVED]*HELP*Stuck on eRecovery - Bootloader Locked

THANKS @mrmazak !!! You saved my phone! And it did what I have been trying to do, the files you gave link of are Oreo! Thanks!
I have an Honor 7x 4/32. I wanted to try the Oreo, but OTA didn't show up. So i checked the OEM unlocking for just in case, and later on, downloaded & installed Oreo update via Firmware Finder app's DNS guide. Checked the compability and BND-AL10 looked fine even though EMUI said BND-L21C432 since the sticker on back said it is BND-AL10. Besides, I couldnt find L21C432 with 4/32 config. So I thought it was rebranded by the guy I bought from.
After update is installed, and it is performed by EMUI, it rebooted into eRecovery and even if i shut it down, it boots back to it. I am a noob and cannot install TWRP on guides because bootloader is locked.
All solutions I found online includes TWRP and I couldn't find a way to flash twrp.img, i get error like "writing 'recovery'...FAILED (remote: not allowed)"
It is called soft brick I guess. What should I do now?
I am so desperate right now... I tried factory reset and wipe cache, still on eRecovery. Drained the battery and tried again, no change.
Solution from @mrmazak :
mrmazak said:
Service rom doesn't need unlocked bootloader.
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard(external card)
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.
Click to expand...
Click to collapse

Any ideas?

iTzCommander said:
Any ideas?
Click to expand...
Click to collapse
Try service rom .

you gotta unlock ur bootloader for starters. then flash a modified twrp that can flash stock imgs. good luck.

mrmazak said:
Try service rom .
Click to expand...
Click to collapse
Yeah but i cannot do that, factory reset doesnt work and I have no access to change rom since bootloader is locked

iTzCommander said:
Yeah but i cannot do that, factory reset doesnt work and I have no access to change rom since bootloader is locked
Click to expand...
Click to collapse
Service rom doesn't need unlocked bootloader.
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard(external card)
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.

mrmazak said:
Service rom doesn't need unlocked bootloader.
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard(external card)
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.
Click to expand...
Click to collapse
I'm downloading now, since it has no bill or whatnot, I cannot deliver it to official technical service.
I hope it works. I will update my first entry with results.

How do I delete this post?

mrmazak said:
Service rom doesn't need unlocked bootloader.
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard(external card)
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.
Click to expand...
Click to collapse
Thanks man..let me try...

Thanks to this post, Saved a lot of time and money. Thank You so much. Works on 4/64 model in India. BND-AL10

Back to Stock
Please provide link to go back to Stock from Service ROM. and how to do it. Service ROM doesn't supports voLTE

Need help unlocking my Note 4

Hello,
I have a Sprint Galaxy Note 4 I'd like to unlock. I called sprint and got the unlocking code. I was to wait 72 hours for the phone to be fully unlocked. Then, I needed to swap my sprint SIM with a different network SIM, and the phone would prompt me to enter the code, and that would be it. Unfortunately, I received an email with the following message:
Letting you know your CPO SAM N910 WHT SNGL on line XXXXXXXXXX cannot be
unlocked due to programming restrictions associated with phones like
yours that were manufactured before February, 2015. You can try
providing your master subsidy lock (MSL) code XXXXXX to your new
carrier to find out if it will work on their network.
Keep in mind we can't guarantee your older phone will operate correctly
on another carrier's network. Each wireless provider determines whether
or not they will utilize the MSL code to reprogram a phone for use on
their network.
Click to expand...
Click to collapse
I put a different SIM in my phone, boot it up, and I get an invalid SIM error, but the phone does not prompt me to enter a code.
I have read and seen multiple Note 4, including the Sprint variant, being unlocked. Does anyone know what I need to do to unlock it?
Thanks

Aloupha said:
Hello,
I have a Sprint Galaxy Note 4 I'd like to unlock. I called sprint and got the unlocking code. I was to wait 72 hours for the phone to be fully unlocked. Then, I needed to swap my sprint SIM with a different network SIM, and the phone would prompt me to enter the code, and that would be it. Unfortunately, I received an email with the following message:
I put a different SIM in my phone, boot it up, and I get an invalid SIM error, but the phone does not prompt me to enter a code.
I have read and seen multiple Note 4, including the Sprint variant, being unlocked. Does anyone know what I need to do to unlock it?
Thanks
Click to expand...
Click to collapse
Use this tool to permanently unlock your device.
Download link for tool is in video description.
Screw the carrier
By this tool you can unlock all Samsung sprint devices.
https://youtu.be/tkrI7PTaZqA
Tool is free but watch carefully and follow instructions exactly as shown in video.
Let me know if it worked for you.

Trex888 said:
Use this tool to permanently unlock your device.
Download link for tool is in video description.
Screw the carrier
By this tool you can unlock all Samsung sprint devices.
https://youtu.be/tkrI7PTaZqA
Tool is free but watch carefully and follow instructions exactly as shown in video.
Let me know if it worked for you.
Click to expand...
Click to collapse
Thanks - it's kind of hard to follow the instructions. It's unclear what he is doing.
It would appears that you first place the phone in download mode. In his instruction, he attempted to do that, but the phone rebooted. Is this a necessary step? Then he put the phone in recovery mode. But after that, he doesn't show you want happens. He simply moves on to unlocking a different phone. Is simply putting the phone in recovery mode unlock it? I doubt it... do I click on the Unlock button while in download mode to unlock it? It's not clear

Aloupha said:
Thanks - it's kind of hard to follow the instructions. It's unclear what he is doing.
It would appears that you first place the phone in download mode. In his instruction, he attempted to do that, but the phone rebooted. Is this a necessary step? Then he put the phone in recovery mode. But after that, he doesn't show you want happens. He simply moves on to unlocking a different phone. Is simply putting the phone in recovery mode unlock it? I doubt it... do I click on the Unlock button while in download mode to unlock it? It's not clear
Click to expand...
Click to collapse
Follow these steps exactly
Before you begin you must have samsung usb drivers installed in your windows pc.
1 download cdma yemen tool that i mentioned in my earlier replies.
2 put your phone in adb mode by dialing ##3424# and choose adb+dm (very important)
3 reboot device
4 open tool and connect your device via usb cable (WATCH OUT CAREFULLY FOR ANY POP UP WINDOW ON YOUR PHONE YOU MUST ALLOW PERMISSION TO CONNECT DEVICE WITH TOOL.
5 inside tool click on port/adb and select your device.
6 choose your correct model N910P of you have Note 4 sprint.
6 click UNLOCK TAB in tool and wait until your device will reboot automatically.
thats it.
After reboot hopefully you have permanently unlocked device.
If your device successfully unlocked then dial ##3424# and select mtp+adb back to normal.
The guy is showing in video all the stuff that this tool can do so dont go to download mode or recovery or anything because that's for removing frp lock and other stuff.
Let me know if it worked for you.
By the way if you are on latest QI5 firmware i am not 100% sure this tool will work because QI5 has latest bootloader/modem and it's not easy to unlock.
If this tool did not work for you let me know i have workaround.
Good luck

Trex888 said:
Follow these steps exactly
Before you begin you must have samsung usb drivers installed in your windows pc.
1 download cdma yemen tool that i mentioned in my earlier replies.
2 put your phone in adb mode by dialing ##3424# and choose adb+dm (very important)
3 reboot device
4 open tool and connect your device via usb cable (WATCH OUT CAREFULLY FOR ANY POP UP WINDOW ON YOUR PHONE YOU MUST ALLOW PERMISSION TO CONNECT DEVICE WITH TOOL.
5 inside tool click on port/adb and select your device.
6 choose your correct model N910P of you have Note 4 sprint.
6 click UNLOCK TAB in tool and wait until your device will reboot automatically.
thats it.
After reboot hopefully you have permanently unlocked device.
If your device successfully unlocked then dial ##3424# and select mtp+adb back to normal.
The guy is showing in video all the stuff that this tool can do so dont go to download mode or recovery or anything because that's for removing frp lock and other stuff.
Let me know if it worked for you.
By the way if you are on latest QI5 firmware i am not 100% sure this tool will work because QI5 has latest bootloader/modem and it's not easy to unlock.
If this tool did not work for you let me know i have workaround.
Good luck
Click to expand...
Click to collapse
I am on QI5, and I didn't see a adb+dm option. I did see a DM + MODEM + ADM option under QUALCOMM USB SETTING (see attached screenshot), so I selected that.
The tool says Unlock Done With out Root... but it doesn't appear that the phone was indeed unlocked.
What's the workaround you have?

Aloupha said:
I am on QI5, and I didn't see a adb+dm option. I did see a DM + MODEM + ADM option under QUALCOMM USB SETTING (see attached screenshot), so I selected that.
The tool says Unlock Done With out Root... but it doesn't appear that the phone was indeed unlocked.
What's the workaround you have?
Click to expand...
Click to collapse
Yes DM+MODEM+ADM i was meaning.
The workaround i have is you have to flash Twrp RECOVERY and have to flash "ENG ROM" DONT FLASH ENG BOOTLOADER OR BASEBAND YOU WILL END UP UNKNOWN BASEBAND AND NULL IMEI.
Flash the rom from twrp and Also you have to flash supersu.zip to get full root with eng rom.
after that you have to use tool "Z3X SAMSUNG TOOLS PRO v27 or higher"
I cant share links here on xda for z3x because its heavily paid tool but if you search on youtube "z3x pro cracked" you will get 100s of videos with links to download.
HERE IS THE LINK FOR ENG ROM BY @freeza thanks to him.
https://forum.xda-developers.com/no...leakmm-sm-n910p-touchwiz-marshmallow-t3327350
After flashing eng rom the rom will take 35 minutes to boot so be patient and wait and also make sure battery is fully charged.
After that enable DM+MODEM+ADM as i mentioned earlier and you can unlock from z3x domestic use for american sim or unlock for international sim use.
Once phone is unlocked you must have to flash QI5 stock firmware via odin and do factory reset from stock recovery and dont worry the unlocking will stick permanently.
I personally did this method on QI5 ON my own device and it worked just fine.
I REPEAT DO NOT FLASH ENG BOOTLOADER OR MODEM OTHERWISE YOU WILL SCREW YOUR DEVICE COMPLETELY.
Cant explain more you got the idea i guess...
Good luck.

Trex888 said:
Yes DM+MODEM+ADM i was meaning.
The workaround i have is you have to flash Twrp RECOVERY and have to flash "ENG ROM" DONT FLASH ENG BOOTLOADER OR BASEBAND YOU WILL END UP UNKNOWN BASEBAND AND NULL IMEI.
Flash the rom from twrp and Also you have to flash supersu.zip to get full root with eng rom.
after that you have to use tool "Z3X SAMSUNG TOOLS PRO v27 or higher"
I cant share links here on xda for z3x because its heavily paid tool but if you search on youtube "z3x pro cracked" you will get 100s of videos with links to download.
HERE IS THE LINK FOR ENG ROM BY @freeza thanks to him.
https://forum.xda-developers.com/no...leakmm-sm-n910p-touchwiz-marshmallow-t3327350
After flashing eng rom the rom will take 35 minutes to boot so be patient and wait and also make sure battery is fully charged.
After that enable DM+MODEM+ADM as i mentioned earlier and you can unlock from z3x domestic use for american sim or unlock for international sim use.
Once phone is unlocked you must have to flash QI5 stock firmware via odin and do factory reset from stock recovery and dont worry the unlocking will stick permanently.
I personally did this method on QI5 ON my own device and it worked just fine.
I REPEAT DO NOT FLASH ENG BOOTLOADER OR MODEM OTHERWISE YOU WILL SCREW YOUR DEVICE COMPLETELY.
Cant explain more you got the idea i guess...
Good luck.
Click to expand...
Click to collapse
The URL for the ROM is dead. Do you by any chance have alternate URL?

Aloupha said:
The URL for the ROM is dead. Do you by any chance have alternate URL?
Click to expand...
Click to collapse
Here
https://mega.nz/#!vQ9VDJIS!Gv85h3Y3K44ym9BlRvNvJEfkiXHfO__AbJHElZycUnY
Btw try first the cdma yemen tool to.unlock with this rom with root. Maybe it can work.

It appears that I am not able to install TWRP... I install it via Odin from AP, and the install is successful. But when I try to boot into recovery, I get the stock recovery....
I tried TWRP 3.1.1 and 3.2.3... same thing. What am I not doing?

Aloupha said:
It appears that I am not able to install TWRP... I install it via Odin from AP, and the install is successful. But when I try to boot into recovery, I get the stock recovery....
I tried TWRP 3.1.1 and 3.2.3... same thing. What am I not doing?
Click to expand...
Click to collapse
Open odin and uncheck auto reboot in odin options
Choose AP and flash twrp
After Odin shows pass remove battery
Insert battery and Boot straight into twrp by volume up+home+ power
If your phone reboots after flashing twrp the system overwrites the stock recovery over twrp thats why you are losing twrp so do not reboot system after flashing twrp.
Once you booted into twrp then if will stick permanently and stock recovery will never show up.
If i was helpful then consider hit thumbs up on my replies.

Thanks! It took a while with multiple flashes, but I think it is fully unlocked now. I am able to put a Verizon SIM card in it and get no sim card error message.

Aloupha said:
Thanks! It took a while with multiple flashes, but I think it is fully unlocked now. I am able to put a Verizon SIM card in it and get no sim card error message.
Click to expand...
Click to collapse
Put sim card in phone then
Try dial ##72786# and press yes
Phone should reboot then you should get reception and.no sim massage won't show up.

Usure if anyone still using this. But I just got my phone unlocc using it on crikket/att. Unsure why you got a 7 wait but I was able to make phones and use internet immediately after I unlocc the phone. The only problem I'm facing is being able to use 4g o the phone.

Zaiaku said:
Usure if anyone still using this. But I just got my phone unlocc using it on crikket/att. Unsure why you got a 7 wait but I was able to make phones and use internet immediately after I unlocc the phone. The only problem I'm facing is being able to use 4g o the phone.
Click to expand...
Click to collapse
You won't get 4g/lte because n910p sprint note 4 is CDMA model and you need GSM model for 4g on at&t/cricket.

Tmobile Oneplus 7t - Relocked Bootloader Stucks in Your device is corrupt. It can't be trusted and will not boot

Hi,
I have recently bought a T-mobile version of OP7T. Even though T-Mobile unlocked the network permanently, I still didn't like T-mobile branding at the start, plus I wanted Stock OxygenOs. So what did I do?
(No root and No TWRP)
1. I've Unlocked the bootloader via the method in this post. Stage-1
2. I have flashed the stock rom which I downloaded from this post. Stage-2
3. Phone loads up perfectly fine and now I have stock OOS. to make sure everything is fine, I also did a factory reset and re-flashed the stock rom to make sure there's no track of previous roms.
4. I then wanted to relock the bootloader in order to keep my device safe and enjoy having a normal device like any others without the ugly message at the startup.
5. So I put it in fastboot mode and executed "fastboot flashing lock" or "fastboot oem lock" and it gave me the options and I locked the bootloader.
6. after this, I can't do anything else. it keeps showing me the page where it says Your device is corrupt. It can't be trusted and will not boot and in order to get rid of I need to keep unlocking the devices relfashing everything and the rest of the story.
I've read all the accurate and inaccurate infos on forums where another guy claims when he did turn everything to stock (recovery + rom + factory reset) things go back to normal and he's done. in my case it doesn't work.
Please help me, how I can be able to relock the bootloader without running into Your device is corrupt. It can't be trusted and will not boot.
Thanks.

First I think no help is stupid, since that is the regular way of doing it. Second you should have read extensively before doing what you did. T-mobile is very specific device. What he probably didn't mention is that you need the original rom t-mobile branded, since you need original software to be able to relock bootloader. I would recommend use msm- tool to recover you device. Read carefully and next time just be sure that what you are doing is informed.

I have unlocked the device and installed everything. the phone works like a charm.
My only problem is that I can't re-lock the bootloader.

bahadorkh said:
I have unlocked the device and installed everything. the phone works like a charm.
My only problem is that I can't re-lock the bootloader.
Click to expand...
Click to collapse
That was my point in order to relock your device you must have the original firmware that the phone came with if it's t-mobile. Installed in both slots. Then you can relock you device.

Please try this thread
[OP7T T-MOBILE][OOS 11.0.1.5 HD63CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com

After the first boot you must update via OTA, then after the 7T reboots you can go back into the bootloader and relock it. I'm typing this message out on my T-Mobile 7T running the Global OOS 11 version. _ANY_ modification to the system whatsoever will cause the "Device is Corrupt" error, due to a mismatch of the keys used by OnePlus to sign the firmware. I've attached a screenshot of my "About phone" section as proof of the conversion, however, I can't show proof of my bootloader's state because I don't have access to a PC at the moment and *#*#7378423#*#* didn't work, neither did *#*#7378423*#*#. If I remember to the next time I'm near a PC I'll add proof of that too.
For further reading see::
1.) https://source.android.com/security/verifiedboot/boot-flow#locked-devices-with-custom-key-set
And
2.) https://source.android.com/security/verifiedboot/dm-verity
P.s. I do realize that I'm almost a year late to this discussion, but I thought knowing would/could still be useful to someone.

[SM_G973U/U1/W_Snapdragon]-[Upgrade Easily Android 11 To 12 Using Odin]-[Automatically Root Remove Forceencrypt Patch Bluetooth And Fix Safetynet]

Must Have An Unlocked Bootloader To Do This!
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 4 With Higher Firmware!!!!
Unless Using Bit Safe Firmware That Is Patched​
Downloads
SM-G973U/U1/W- Model
USERDATA_AIO_G973_CANARY_FORCE_WIPE_2022_01_28.tar.md5 --Use on android 11 or 12
This will force a wipe of data no mater what.
Full Odin 4.0 Android 12 Bit4 Safe Firmware
G973USQU6HULD_BIT4_SAFE.7z
This are odin files and will safely update all image files too bit 6 and keep bit 4 bootloaders. Unfortunately this will wipe data this is beyond my control as it seems to be a side affect of mixing firmware it causes data not to mount and therefore my AIO will format it. This is full firmware with USERDATA_AIO. This will put you on U firmware. Before flashing I recommend removing your google account and make sure in download mode you are not frp locked
If above USERDATA_AIO_G973_FORCE_WIPE_08_35_21.tar.md5 is newer than the one in this zip use the newer one from above
Odin3_v3.14.1_3B_PatcheD.zip
Files For SM-G970 Found Here
Files For SM-G975 Found Here
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions For Newly Unlocked Devices
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Use patched 3.14 odin and load file USERDATA_SLOT_*9**U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Install Instructions For Updating Firmware On Phone Already Unlocked
1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above
2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_*9**U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not
Install Instructions If Updating Images With TWRP
1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.
2. Use patched 3.14 odin and load file USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.
4. Alternatively to using USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_21_4_S10U_US_Series_Android_R.zip found in post 2
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
@elliwigy
@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff

​
Info For U Model Bootloader Unlocking Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
Below US snapdragon devices can be bootloader unlocked with above service as long as bootloader version meets below criteria. Bootloader version can be determined from the 5th character from the right on the baseband version or build number, in some cases from kernel version
Z Fold2 5G BL V1
Fold 5G BL V1-4
Fold BL V1-4
Z Flip 5G BL V1
Z Flip BL V1-3
Note series 20 BL V1
S20 series BL V1
S20 FE 5G BL V1-2
Note 10 series BL V1-5
S10 Lite BL V1-3
Note 10+ 5G N976U BL V1-4
Note 10+ 5G N976V BL V1-5
S10 5G BL V1-5
S10 series BL V1-4
Note 9 BL V1-7
S9 series BL V1-9
Tab S6 BL V1-3
Tab S7 BL V1
Tab S7+ BL V1
A71 5G BL V1-2
A51 BL V1-5
A51 5G BL V1-4
A50 A505W BL V1-A
A50 A505U BL V1-B
S21 BL V1
A32 5G BL V1-3
Tab Active Pro 10.1 BL V1-4
XCover Pro BL V1-7

You are the best, thanks.

I update the tar file so now only one is needed for android 10 or 11 and I and I changed the safenet fix to the latest one that patches your own keystore file thanks @afaneh92 for the module and have it install as a magisk module so it doesnt affect system files that way if a bettery way comes out you can simply update the module and not have too worry about replacing system files. If you have used my old tar to root your phone I suggest reflashing stock firmware in odin along with my new tar file and this will remove the safetynet files from system and too the module

tried this via odin and it says md5 hash is invalid im on android 11

Fixed issues where if bluetooth or keystore files are already patched in system by other means then my installer will just skip them instead of failing during flash

Add files for SM-G973W Canadian Model

eventually for G9730 HK variant pls ?

Possible to add support for g973F variant?

Thank you so much for this.

Hello please can anyone help me out. i brought galaxy s10 snapdragon varient and it is japan version docomo branded. and it came along with lots of bloatware of docomo and other japanese touch. i want to get rid of it, can i install any other firmware will it work? it shows model no. also like SC-03L. please help me out someone

xerol said:
Hello please can anyone help me out. i brought galaxy s10 snapdragon varient and it is japan version docomo branded. and it came along with lots of bloatware of docomo and other japanese touch. i want to get rid of it, can i install any other firmware will it work? it shows model no. also like SC-03L. please help me out someone
Click to expand...
Click to collapse
debloat it via adb, noo root / ubl needed. i can send u the bloat list of those japanese app

Is it possible to upgrade and keep my device as SM-G973U1? U1 is the only variant that seems to allow wifi calling on AT&T MVNOs and I find it necessary. Don't want to lose that. Plain old U I am told is a problem.
Currently running Android 10 on a Snapdragon using your previous instructions, for which I am very grateful.

BWhitmore said:
Is it possible to upgrade and keep my device as SM-G973U1? U1 is the only variant that seems to allow wifi calling on AT&T MVNOs and I find it necessary. Don't want to lose that. Plain old U I am told is a problem.
Currently running Android 10 on a Snapdragon using your previous instructions, for which I am very grateful.
Click to expand...
Click to collapse
Upgrade to Android 11 with v4 bootloader is ok, if you want oneui 3.1 or 4.or 4.1 need to flash patched firmware to keep bootloader unlocked.

afaneh92 said:
Upgrade to Android 11 with v4 bootloader is ok, if you want oneui 3.1 or 4.or 4.1 need to flash patched firmware to keep bootloader unlocked.
Click to expand...
Click to collapse
Right but I am wondering if I follow the steps above with my g973u1, will I end up with a g973u1 running 11 or 12 or will this revert it to g973u ?

BWhitmore said:
Right but I am wondering if I follow the steps above with my g973u1, will I end up with a g973u1 running 11 or 12 or will this revert it to g973u ?
Click to expand...
Click to collapse
Flashing U firmware will end up with U
The same for U1

Anything in the working for BL version 6?

algarues said:
Anything in the working for BL version 6?
Click to expand...
Click to collapse
not yet

Question Root OnePlus 9 Pro T-Mobile variant

Has anyone had any luck rooting the T-Mobile version of the OnePlus 9 pro, and if so how did you go about it?

I have not, have you considered reaching out to anyone that sells this service on ebay? Or, possibly buying a rooted version of this phone off Ebay?

xbxhkz said:
Has anyone had any luck rooting the T-Mobile version of the OnePlus 9 pro, and if so how did you go about it?
Click to expand...
Click to collapse
I did, on Android 11, unlocked boot loader, then twrp and magisk same time and finally RO2RW script from lebigmac thread....

TheGhost1951 said:
I did, on Android 11, unlocked boot loader, then twrp and magisk same time and finally RO2RW script from lebigmac thread....
Click to expand...
Click to collapse
Would you happen to have the RO2RW zip? Looks like his thread is closed and I can't seem to find the script to download..

xbxhkz said:
Has anyone had any luck rooting the T-Mobile version of the OnePlus 9 pro, and if so how did you go about it?
Click to expand...
Click to collapse
First thing is the bootloader needs to be unlocked!

TheGhost1951 said:
First thing is the bootloader needs to be unlocked!
Click to expand...
Click to collapse
I already know how to unlock the bootloader. I just know that on some TMobile variants of OnePlus devices, like the OnePlus 8 you have to go through a bunch of extra **** to be able to unlock the bootloader, but if you have the boot file that is prepatched with magisk you can just flash that as long as it is the same version. Does anyone know if you have to have the sim unlocked in order to unlock the bootloader like you do with the op8? Or can you just enable OEM unlock and then adb to unlock the bootloader?

Here is a guide for unlocking the bootloader on TMO OP9P.
T-Mobile OnePlus 9 Pro Bootloader Unlock
1ST WARNING: BACKUP YOUR DEVICE, WHETHER TO GOOGLE, AND/OR YOUR INTERNAL STORAGE USING THE ONEPLUS BACKUP APP WHICH I WILL LINK BELOW AND COPY THE BACKUP TO YOUR COMPUTER (I WOULD SUGGEST DOING BOTH BACKUP TYPES) Clone Phone App...
forum.xda-developers.com

As for rooting, it is rather simple once the bootloader is unlocked..

You may know certain things, but I do not have a clue as to what you already know. Therefore I take it step by step to help you achieve what you are wanting to do!

I am working on the rooting instructions as of now and will post them for you complete with links! Be patient.

Rooting the OnePlus 9 Pro
1) Unlock the bootloader using the guide from here
https://forum.xda-developers.com/t/how-to-unlock-the-t-mobile-bootloader.4256319/
2) Make sure you have the latest platform-tools installed on computer from here
https://technastic.com/android-sdk-platform-tools-download/
3) Download the latest TWRP img and rename it twrp.img from here and save it in your platform-tools folder
https://dl.twrp.me/lemonadep/twrp-3.7.0_11-0-lemonadep.img
4) Download Magisk apk file from here and save it to your platform-tools folder
https://github.com/topjohnwu/Magisk/releases/download/v25.2/Magisk-v25.2.apk
5) Click on the address bar of windows explorer and type "cmd" to open a command windows
6) With phone connected to PC, copy the magisk app to internal storage and then type "adb reboot bootloader" and hit enter
7) Once in bootloader mode, type "fastboot boot twrp.img" enter
8) once twrp loads, tap install and select the magisk app and install it then reboot to system
9) once OS has loaded, go into app drawer and tap on Magisk (looks like a green android icon) and follow the prompts,
10) Reboot and enjoy a rooted phone but not completely rooted!
11) Download the RO2RW script from here
https://mega.nz/file/HcxQiaLD#P17H3LsvUc4Y5S9mG3jTqHmoMvuyImYKvigX20VZ7xU
12) Follow instructions from this link
https://tinyurl.com/yc8k3h2s

Good looks

rpikus27 said:
Good looks
Click to expand...
Click to collapse
I wanted to confirm that you don't need sim unlock to unlock bootloader. You can enable oem toggle with adb or one+tool and unlock bootloader and root. I did need to submit my token and wait a week. There have been recent reports of the unlock bin sent back from OnePlus automatically isn't right and people are reaching out to support to get the right bin back.
I submitted my token, flashed to EU, unlocked bootloader without token, rooted. Then when my token arrived a week later, I went back to stock Tmo rom, unlocked with token, and rooted.
(I monitored the requests for sim unlock to see if I could find anything useful. I monitored failures and successful unlock packets and then went back to EU rom)

xbxhkz said:
I already know how to unlock the bootloader. I just know that on some TMobile variants of OnePlus devices, like the OnePlus 8 you have to go through a bunch of extra **** to be able to unlock the bootloader, but if you have the boot file that is prepatched with magisk you can just flash that as long as it is the same version. Does anyone know if you have to have the sim unlocked in order to unlock the bootloader like you do with the op8? Or can you just enable OEM unlock and then adb to unlock the bootloader?
Click to expand...
Click to collapse
I meant to quote you in my above post. Sorry

termux proot-distro can root as well but android kernel not rooted

you sure can root Tmo stock rom. the numbers may be differet but the iteration of firmware is the same on all variants. Its been a while,but, my first OP9P i flashed whatever. Just use the boot.img from AA or EU but be careful. It has to match. Example: Tmo 11.2.4.4 compatible boot.img with 11.2.8.8 AA/EU/NA. And so on.
For me, I'm lost with the newer firmwares and just got back. Will be converting cause Tmo wont sim unlock my paid off phone. Sick of Tmobile at this point

@TheGhost1951 I've sanitised this thread from your posts, in which you promoted a banned member. Please refer to your inbox for further information!
Regards
Oswald Boelcke
Senior Moderator