Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
Downloads
WARNING: Upgrading from version before 20120817 will wipe your phone
Latest nightly: http://download.cyanogenmod.org/?device=galaxysmtd
Google Apps: http://goo.im/gapps
Installation
- First time flashing CM10 to your Galaxy S (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another CM10 Build?
Do a Nandroid Backup! WARNING: Upgrading from version before 20120817 will wipe your phone
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Note: Nandroids of CM7, CM9 and CM10 are incompatible due to partition layout changes. Please be on the correct version before restoring Nandroids.
FAQ
Please read before posting or reporting bugs!
http://teamhacksung.org/wiki/index.php/CyanogenMod10:GT-I9000:Frequently_Asked_Questions
Reporting Bugs
You are allowed to report bugs only at the SGSCM10 bug tracker. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Phone model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
IRC
Join us on #teamhacksung-support (user channel) or #teamhacksung (developer channel)
Changelog?
A rough changelog is available here:
http://changelog.bbqdroid.org/#/cm10/galaxysmtd or http://10.cmxlog.com/?device=galaxysmtd
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Thanks 1St !
And 2! Thanks!
Woah...
4th )
flashing right away
Oh my god!
I'm not dreaming
Simply Amazing!
Nice!! Will try now
Nice! Any changes from V2?
thanks pawitp, downloading
dream come true....thanks
Thanks for the hard work guys ! We are with you !
Thank u CM and pawitp
From GT I9000
asder00 said:
Nice! Any changes from V2?
Click to expand...
Click to collapse
"V2" was not made by any of the CM team and I don't know what's in there. This build is the actual state of the CM10 source code as of now.
Welcome back pawitp..............:highfive::highfive:
Hahah iPhone background in recovery, but it looks awesome!
Thanks
Fingers crossed guys!
Nice! Will try when I finish work
Sent from my GT-I9000 using xda app-developers app
What is working and what isnt working?
Galaxy S -Tapatalk 2
Great news!!!!!
Booting the beast
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
Downloads
Latest build: http://download.cyanogenmod.org/?device=galaxysmtd
Google Apps: http://goo.im/gapps
Please use http://goo.im/devs/Hashcode/gapps/gapps-jb-20130729.zip or http://d-h.st/4vB for versions prior to 20130816
Installation
- First time flashing CM10.2 to your Galaxy S (or coming from another ROM)?
See detailed instruction on the CyanogenMod wiki
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
- Upgrading from another CM10/CM10.1/CM10.2 prior to 20130816 Build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally restore /data from Nandroid Backup (the update will wipe your /data)
Optionally install the Google Addon
- Upgrading from another CM10.2 Build?
Do a Nandroid Backup!
Install the ROM from internal sdcard using ClockworkMod Recovery
Note: The partition layout of CM10.2 (beginning from 20130816 nightly) differs of that of CM10/CM10.1. The first install will wipe your /data to switch to the new layout, but after that you may use CWM to restore/backup data of CM10/10.1/10.2. More about repartitioning
Reporting Bugs
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow. Note: If you can provide the latest night/build that the bug didn't exist, it would greatly help in tracking down what caused it.
Code:
What is your--
Phone model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
FAQ
Does this ROM support FM radio?
I've checked and the new FM API in CM is not really compatible with our device without heavy modification. Applications using the new API expect to be able to read the FM input as it if were another stream, but FM on our device only does pass-through from FM receiver to speaker/headset, which causes certain functionalities to not work such as volume control. Maybe one can modify the audio routing table in the kernel to have it behave like the API expected, but I'm not really interested in investing time to do that.
TL;DR: No built-in FM radio except if someone else does it and submits a patch.
Why is there less internal storage than CM 10.1?
Due to larger size required for newer versions of Android and CM improvements, space has to be taken from /data for system apps.
Can I request a feature?
If it is a feature in general CyanogenMod, please post the request at the CyanogenMod bug tracker.
http://jira.cyanogenmod.org
IRC
Join us on #teamhacksung-support (user channel) or #teamhacksung (developer channel)
Changelog
A rough changelog is available here:
http://changelog.bbqdroid.org/#/cm10.2/galaxysmtd or http://10.2.cmxlog.com/?device=galaxysmtd
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
For previous UNOFFICIAL builds, please see http://forum.xda-developers.com/showpost.php?p=44603320&postcount=332
I will test and report bugs
Edit:
gapps link dont work
Edit2:
working gapps link: http://d-h.st/VhC
Awesome!!! :laugh:
Flashing.. Will be back with first impressions.
Really Unstable...
Downloaded the ROM just now really unstable.....
Seriously needs a lot of fixes even there are reboots when uninstalling an app.....
Hope for the fixes to be soon but thnx for the ROM by the way ...
One Thing: Whats so new in 4.3 ????????
+1 for the ROM
ojojoj said:
I will test and report bugs
Edit:
gapps link dont work
Edit2:
working gapps link: http://d-h.st/VhC
Click to expand...
Click to collapse
Works for me.
TeKnoGin said:
Downloaded the ROM just now really unstable.....
Seriously needs a lot of fixes even there are reboots when uninstalling an app.....
Hope for the fixes to be soon but thnx for the ROM by the way ...
One Thing: Whats so new in 4.3 ????????
+1 for the ROM
Click to expand...
Click to collapse
Unless you provide a bug report with a logcat, I won't be able to find out what's wrong and fix it.
Wow, it's just awesome hoping it will have cappy version soon
Cool thank you! Downloading.
Downloading.... Thanks !!!
Wow... Downloading asap...
TeKnoGin said:
Downloaded the ROM just now really unstable.....
Seriously needs a lot of fixes even there are reboots when uninstalling an app.....
Hope for the fixes to be soon but thnx for the ROM by the way ...
One Thing: Whats so new in 4.3 ????????
+1 for the ROM
Click to expand...
Click to collapse
Uhm ... a more detailed changelog from Android 4.2.2 to 4.3 ? : Grab a gallon of coffee, and a pack of cigarettes and some other beverage as the coffee will be gone in no time, sit back and start reading because this will take a long long time
@pawitp : ty for bringing us Android 4.3, it's kinda unstable for now as you've mentioned, but I can't wait to try this rom again after you cast your magic on it.
Gapps link doesnt work, i suggest to upload in another host
ElmirBuljubasic said:
Gapps link doesnt work, i suggest to upload in another host
Click to expand...
Click to collapse
Sorry, you can't view or download this file at this time.
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file that you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator.
Click to expand...
Click to collapse
Could anyone please upload?
yadavjpr said:
Could anyone please upload?
Click to expand...
Click to collapse
http://d-h.st/VhC
Thank you for your great effort.
Another mirror for Gapps -> http://zen.maciej.es/files/gapps-jb43-20130726-signed.zip
@pawitp will inform you i tested with cdesai's revert commit and i got the RIL on rom.
Thanks pawitp.
Really appreciate ur hard work.
Edit:
Any1 who has downloaded the ROM from goo mind uploading it to Google drive or mayne making a torrent? It will be highly appreciated by many of us here.
Sent from my Nexus 7 using xda app-developers app
thanks for the rom...it was very quick...
ive installed the rom and so far i didnt have any FCs. and its weird that everything works fine for me so far, except focal app...whats this app?
by the way i dont see any difference with 4.2.2.
Wow !!
Thank you man. You rock \m/
I WILL BE POSTING THIS ROM TRY AT YOUR OWN RISK NOT MY ROM NOT MY DEVELOPMENT BRICKED PHONE NOT MY ISSUE SRY ( OPPO TOOLS HELP WITH BRICKED DEVICES )
Sang Nguyen
Sang Nguyen ADMINISTRATOR MEMBER BQT
Posts:119 Likes:86 Trophy Points:96
JOIN NOW10/05/16
Information Rom Hexagon Hexagon Rom was developed based on CyanogenMod With the combination of customization features from Slim , Omni , Travel , Aicp, DroidOS ... Brought to you a Custom ROM with many features customized, high stability, convergence of the latest Android essence encapsulated in your smartphone. After all these attempts are today DroidVn-Team will send to you the first Hexagon OnePlus device .. .The other devices will be updated in the coming days, respectively.
Team DroidVN sincere thanks to AOKP , Omni , Travel , AICP , The Muppest
We can not accomplish this rom without you.
- Droid Version: Stable (Stable) - Android Version: 6.0.1 MM - Kernel: 3.4.x - Community Development: Droidvn-Team - Deverloper: Sang Nguyen , Tuan Nguyen, Phuocbull , Nthoa.it - Forum support Forum: Droidvn.com - Source code: Github
: Changelog:
SPOILER: CHANGELOG
Installation Guide (you must ensure the implementation of all the steps below to process successfully installed , we will not be responsible for your phone case damaged SD card, Brick)
Download the ROM and GApps in the phone memory
We recommend using TWRP recovery, and the machine you have to root and custom recovery installed
Boot into recovery
Wipe Cache / System / Dalvik / Data ( No Internal SDcard format )
Install, select the ROM zip file
Next select the GApps zip
Reboot and enjoy. (Note the first boot time can take a while, you should be patient)
Note flash GApps bottom.
: Download:
: GApps:
: Screenshots:
Screenshot_20160623-164246.png Screenshot_20160623-164323.png Screenshot_20160623-170429.png Screenshot_20160623-170648.png Screenshot_20160623-170748.png Screenshot_20160623-171558.png Screenshot_20160623-171609.png Screenshot_20160623-171635.png Screenshot_20160624-120022.png Screenshot_20160625-152441.png
[url]https://mega.nz/#!0VJXHBAD[/url]
KEY- !G96FyEt7Ux8T8t6PPVPNjEsbdML99RN6nPwEPFJ-2I0
This rom comes with supersu already installed and dolby installed also it supports stock partition not sure about the others please test and find out on your own
storage
if you want a unified storage do the chinese storage partition once you have that set up with twrp follow these steps
1: flash rom
2:flash modem if you need to
3:flash cm13 unified storage patch from the cm14 thread ( also available on community.oppo)
4:flash gapps
5:flash any extra mods you might like fyi this rom comes with a built in super user and dolby atmos
give it time to load then check your storage it should say calculating storage then show a full unified partition
support lvm?
how about new lcd? anyone tried?
Code:
clxer said:
support lvm?
Click to expand...
Click to collapse
LVM not support
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
SCREENSHOTS
3rd PARTY ADDONS/MODS
While we have no issues with people using supersu/magisk/xposed/custom kernels/etc, we can't provide support for users who have them installed.
This thread is not the right place to discuss about mods/addons.
HOW TO INSTALL LINEAGEOS
- Make sure your phone was running OxygenOS 5.1.4 at least once
- Remove custom encryption pins/passwords else decryption will fail!
- Upgrade to latest available official firmware
- Upgrade to latest available TWRP
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP.
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- RECOMMENDED: Do a factory reset! No support if you didn't!
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot
HOW TO UPDATE LINEAGEOS
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Reboot
HOW TO UPGRADE LINEAGEOS FROM LOWER VERSION
- Upgrade to latest available official firmware
- Upgrade to latest available TWRP
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Update the Google Apps addon package if it was installed on your previous LineageOS version.
- Reboot
DOWNLOADS
LineageOS 17.0: Official | Unofficial
Firmware: https://sourceforge.net/projects/cheeseburgerdumplings/files/17.1/cheeseburger/firmware/
Migration-Tools: https://androidfilehost.com/?w=files&flid=254680 (Unofficial->Official, Official->Unofficial)
SU-Addon: Official | Unofficial
Google Apps: http://opengapps.org/ | BETA
TWRP: TWRP by codeworkx | Official
DEVELOPER RESOURCES
https://github.com/LineageOS/android_device_oneplus_cheeseburger
https://github.com/LineageOS/android_device_oneplus_msm8998-common
https://github.com/LineageOS/android_kernel_oneplus_msm8998
HOW TO CONTRIBUTE?
Send your patches up for review: https://review.lineageos.org/
TELEGRAM GROUP
https://t.me/joinchat/GQS-ghNaf-1YMpjSbh_puQ
I returned back to stock yesterday. I'll sit here and wait 'till this ROM will be more stable. But why haven't you merged 4.4.192?
thankss )
Tested for an hour now. Runs very smooth, dash charging works. But video playback doesn't work at all(browser, youtube, reddit, snapchat)
It's a Trainwreck not even close to daily driveable I've always loved lineage since CyanogenMod but they have a lot of work still I can't even get the firmware to work I'm gonna wait a few for a couple updates and try again but nitrogen seems solid until then
Added to the OnePlus 5 Index Thread here.
tattooed87129 said:
It's a Trainwreck not even close to daily driveable I've always loved lineage since CyanogenMod but they have a lot of work still I can't even get the firmware to work I'm gonna wait a few for a couple updates and try again but nitrogen seems solid until then
Click to expand...
Click to collapse
NOS is better. CRD is also down.
Planning to test this rom. Can be used as a daily driver?
On flashing as a fresh install the ROM always restarts to recovery. What am I doing wrong ?
-----
Got it working. I had to flash the firmware again
eNVy said:
On flashing as a fresh install the ROM always restarts to recovery. What am I doing wrong ?
-----
Got it working. I had to flash the firmware again
Click to expand...
Click to collapse
Use latest codeworkx recovery.
Anyone flash the latest from the cyanogen lineage site 17.0-20191006?
Thanks!
Regarding firmware folder, it seems it is empty. Is there any additional source?
pep0te said:
Thanks!
Regarding firmware folder, it seems it is empty. Is there any additional source?
Click to expand...
Click to collapse
Yes, you can find all the OP5 firmwares in the following post: https://forum.xda-developers.com/showpost.php?p=76943628&postcount=8
shadowstep said:
Yes, you can find all the OP5 firmwares in the following post: https://forum.xda-developers.com/showpost.php?p=76943628&postcount=8
Click to expand...
Click to collapse
Thanks dude! Brilliant.
I'm having issues with ads on this build. As everything in Android and apps and games revolve around ads it basically hinders just a bout everything. Whenever an ad-video tries to load while in-app, it just does nothing. Black screen and that's it. Reverted back to Stock OxygenOS.
ohohrobinho said:
I'm having issues with ads on this build. As everything in Android and apps and games revolve around ads it basically hinders just a bout everything. Whenever an ad-video tries to load while in-app, it just does nothing. Black screen and that's it. Reverted back to Stock OxygenOS.
Click to expand...
Click to collapse
Are you using an ad blocker? If yes, try to deactivate it for otherwise not working apps.
It failed to install.
After flashing the ZIP, Magisk and GApps, it boots to fastboot.
I disabled dm-verity in Magisk and the data partition is not encrypted.
pthfdr said:
After flashing the ZIP, Magisk and GApps, it boots to fastboot.
I disabled dm-verity in Magisk and the data partition is not encrypted.
Click to expand...
Click to collapse
Are you decrypted?
Flash rom , gapps and no verity
After setup flash magisk
Why do we need to flash firmware? Can't flash directly?
Hi all,
Can anyone explain why I can't use Google Pay(Tez) in this custom build of LineageOS 17 whereas it can run on official LineageOS 16 builds ?
LineageOS 18.1 is a free, community built, aftermarket firmware distribution of Android 11.0 (R), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Known bugs:
Screen mirroring via slimport HDMI adapter doesn't work.
PMF aka 802.11w doesn't supported. Read here about it.
Encryption has problems. Read here about it.
Downloads:
ROM: https://sourceforge.net/projects/hammerhead-lineageos/files/18.1/
GAPPS: https://opengapps.org/?arch=arm&api=11.0&variant=pico
Credits:
Many thanks to the LineageOS team and all the contributors out there in the community
Contributors:
z3DD3r
Source Code:
Device tree: https://github.com/z3DD3r/android_device_lge_hammerhead/tree/lineage-18.1
Kernel tree: https://github.com/z3DD3r/android_kernel_lge_hammerhead/tree/lineage-18.1
Vendor tree: https://github.com/z3DD3r/android_vendor_lge/tree/lineage-18.1
Android version: 11.0.0 (R)
Kernel version: Linux 3.4.113
SELinux: Enforcing
Status: Stable
Created 2021-01-07
Last Updated 2021-06-08
ROM Installation
To install rom you should increase the /system partition size
This can be done for example with TWRP HH.R
[RECOVERY][UNOFFICIAL] TWRP HH for Nexus 5 (hammerhead)
TWRP HH for Nexus 5 About: TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with...
forum.xda-developers.com
GAPPS Installation
LineageOS Team have recommendations about GAPPS
Here are the most important two copied from LineageOS WiKi:
If you opt to use Open GApps, they offer a variety of sizes of packages that include and overwrite different apps. We only recommend package sizes up through nano. If you use a larger package, we can not guarantee that everything will function on your device, as in many of these cases our included apps are overwritten in favor of the Google App equivalents.
Google apps should be installed via recovery immediately after installing LineageOS. If you reboot into LineageOS before installing Google apps, you must factory reset and then install them, otherwise expect crashes.
Patches
Patches you need to apply to the source code to get the same functionality as in my builds. All patches are actual as of Jun 24, 2022.
SurfaceFlinger
https://review.lineageos.org/c/LineageOS/android_frameworks_native/+/310715
https://review.lineageos.org/c/LineageOS/android_vendor_lineage/+/310716
QCOM display
GitHub - z3DD3r/android_hardware_qcom_display
Contribute to z3DD3r/android_hardware_qcom_display development by creating an account on GitHub.
github.com
git fetch https://github.com/z3DD3r/android_hardware_qcom_display lineage-18.1 && git cherry-pick 29fb1e50d1f2b7cf2386ab168fcffd23450a4ba8^..a7cf3dab9881e40550617febd03a68ace43cfa5f
QCOM media
GitHub - z3DD3r/android_hardware_qcom_media
Contribute to z3DD3r/android_hardware_qcom_media development by creating an account on GitHub.
github.com
git fetch https://github.com/z3DD3r/android_hardware_qcom_media lineage-18.1 && git cherry-pick 8f2abf1879e48068b86d57d8d67d799623a7157a^..075f70c24c10173a861bd84cdd08926783f6680b
Vold (USB OTG)
GitHub - z3DD3r/android_system_vold
Contribute to z3DD3r/android_system_vold development by creating an account on GitHub.
github.com
git fetch https://github.com/z3DD3r/android_system_vold lineage-18.1 && git cherry-pick fcbc4e0cff6843f011e814e6ced291055cc2d467^..cc5f962ed154717df93ddd0843d3bb57739bdd77
AOSP Keyboard (Optional)
GitHub - z3DD3r/android_packages_inputmethods_LatinIME
Contribute to z3DD3r/android_packages_inputmethods_LatinIME development by creating an account on GitHub.
github.com
git fetch https://github.com/z3DD3r/android_packages_inputmethods_LatinIME lineage-18.1 && git cherry-pick 7e55f8c6b7257af03891934da329e2f6aea72c67^..6b0819b6373ee18766d8b1846dcf512dd527dc13
Trebuchet Launcher (Optional)
https://review.lineageos.org/c/LineageOS/android_packages_apps_Trebuchet/+/303250
Please, give actual link to 11 gapps
Ogzador said:
Please, give actual link to 11 gapps
Click to expand...
Click to collapse
An user by the name BrainWash has found unofficial builds of arm Gapps packages for Android 11, that user has shared a link in the Nexus 5 Telegram group.
They might work or not, give them a try on your own risk.
althafvly - Browse /gapps at SourceForge.net
sourceforge.net
gapps a11 arm
althafvly - Browse /gapps at SourceForge.net
sourceforge.net
Need help, please. After los18 zip installing, my twrp was killed. And now i have los recovery. And none-resized sistem partition. Now i can't install gapps.
Ogzador said:
Need help, please. After los18 zip installing, my twrp was killed. And now i have los recovery. And none-resized sistem partition. Now i can't install gapps.
Click to expand...
Click to collapse
Those issues you mention don't seem to be related to this ROM. I just flashed this ROM on my N5 and my TWRP did not get overwritten nor did my partition sizes get reverted to the stock sizes. I don't know what has gone wrong on your side.
Woah, amazing. Thanks! Everything seems to be working so far, only Magisk fails to install.
zheega said:
Woah, amazing. Thanks! Everything seems to be working so far, only Magisk fails to install.
Click to expand...
Click to collapse
Magisk v21.2 installs and works without any issues. Makes sure you flash an up to date version of Magisk, redownload it if doesn't install.
Yes, thank you. I was using a bit older build that didn't work.
Mr.FREE_Bird said:
Those issues you mention don't seem to be related to this ROM. I just flashed this ROM on my N5 and my TWRP did not get overwritten nor did my partition sizes get reverted to the stock sizes. I don't know what has gone wrong on your side.
Click to expand...
Click to collapse
while setting up when booted in, it ask if u want to update lineage recovery along with the os. I think that may overwrite twrp
JackyGundam said:
while setting up when booted in, it ask if u want to update lineage recovery along with the os. I think that may overwrite twrp
Click to expand...
Click to collapse
Maybe but judging from what he said I think he says that his TWRP got overwritten and his partitions got reverted to the stock sizes right after flashing the ROM. So it looks like he did something wrong or doesn't read what the setup asks him...
Wow amazing a lot of thanks for this rom
Latest build ( lineage-18.1-20210109 ) seems to be stuck in a forever-boot-loop.
Here booting well
Having no boot problems with 20210109 comming from 17.1-20201231
It doesn't work with fresh install (just a constant boot loop), but updating from 20210108 to 20210109 works.
zheega said:
It doesn't work with fresh install (just a constant boot loop), but updating from 20210108 to 20210109 works.
Click to expand...
Click to collapse
My tester said that everything works fine after clean installation as well as after update. But there is a problem with latest test package of opengapps. Device can't boot. So if u used opengapps then this is your problem.
Anyway before posting such reports try to perform a clean flash of the ROM without additional packages (gapps/magisk/mods)
I haven't used my Nexus 5 in a few years and now I would like to update it to android 10, in particular your LineageOS 17.1.
But being many years since the last update I was wondering if my recovery, kernel and radio were compatible with android 10. Would you be able to suggest which recovery, which magisk version, which kernel and radio to install? Maybe kernel and radio now come bundled with the OS (?)
Lastly, there is any peculiar step for a clean installation procedure?
I tried to search on the thread beforehand, but couldn't find the answers. Sorry if you already answered my questions.
Thanks a lot for the your time and effort!