i've seen too many videos on youtube that teach indian users how to enable automatic call recording on their samsung a32 4g , but unfortunately that option is not available on my device.
is it possible that some how i get that feature ?
for example by dumping an indian phone apk file or something ?
amiravandfar said:
i've seen too many videos on youtube that teach indian users how to enable automatic call recording on their samsung a32 4g , but unfortunately that option is not available on my device.
is it possible that some how i get that feature ?
for example by dumping an indian phone apk file or something ?
Click to expand...
Click to collapse
i would really appreciate if a user from india extracts phone dialer apk and uploads it here so we can test.
i've seen the same worked for huawei phones.
To activate the call recording it is not the call apk, it is a code that is added to the build.pro or the csc, I do not remember well in one of the two.
PatricioCarrasco said:
To activate the call recording it is not the call apk, it is a code that is added to the build.pro or the csc, I do not remember well in one of the two.
Click to expand...
Click to collapse
thanks for your insight, i was totally clueless before.
it's csc , which is the country code.
here is my experience id like to share :
1-dial *#1234# with your dialer , and it shows you 3 numbers , screenshot it and save it somewhere diffrent than in your phone.
2-download your indonesian firmware for a32 from sammobile that has the same version ending characters as yours.
3-choose home csc from the package and put it in csc part of odin.
4- connect your pc to your phone with an original cable to a usb2 port (if you are on a pc , use backside ports of case) , disconnect every other usb devices.
5-click start of odin , the whole process should be completed in less than a minute and you will get native call recording without data loss.
Thanks for this guide. Works without data loss.
amiravandfar said:
here is my experience id like to share :
1-dial *#1234# with your dialer , and it shows you 3 numbers , screenshot it and save it somewhere diffrent than in your phone.
2-download your indonesian firmware for a32 from sammobile that has the same version ending characters as yours.
3-choose home csc from the package and put it in csc part of odin.
4- connect your pc to your phone with an original cable to a usb2 port (if you are on a pc , use backside ports of case) , disconnect every other usb devices.
5-click start of odin , the whole process should be completed in less than a minute and you will get native call recording without data loss.
Click to expand...
Click to collapse
HI,
in my case, Galaxy A32 4g, it works great, take less than 30s. If I need to make a factory reset? My old CSC was OXM, is it still in the phone?
Best regards
amiravandfar said:
here is my experience id like to share :
1-dial *#1234# with your dialer , and it shows you 3 numbers , screenshot it and save it somewhere diffrent than in your phone.
2-download your indonesian firmware for a32 from sammobile that has the same version ending characters as yours.
3-choose home csc from the package and put it in csc part of odin.
4- connect your pc to your phone with an original cable to a usb2 port (if you are on a pc , use backside ports of case) , disconnect every other usb devices.
5-click start of odin , the whole process should be completed in less than a minute and you will get native call re
Click to expand...
Click to collapse
amiravandfar said:
here is my experience id like to share :
1-dial *#1234# with your dialer , and it shows you 3 numbers , screenshot it and save it somewhere diffrent than in your phone.
2-download your indonesian firmware for a32 from sammobile that has the same version ending characters as yours.
3-choose home csc from the package and put it in csc part of odin.
4- connect your pc to your phone with an original cable to a usb2 port (if you are on a pc , use backside ports of case) , disconnect every other usb devices.
5-click start of odin , the whole process should be completed in less than a minute and you will get native call recording without data loss.
Click to expand...
Click to collapse
Please I want to find out whether I have to root my phone before I start or I should just go ahead without rooting the phone. I'm grateful for sharing your knowledge here.
[email protected] said:
HI,
in my case, Galaxy A32 4g, it works great, take less than 30s. If I need to make a factory reset? My old CSC was OXM, is it still in the phone?
Best regards
Click to expand...
Click to collapse
Its not stored in the phone , if you reset factory it will be reset with the new csc !
della-dell said:
Please I want to find out whether I have to root my phone before I start or I should just go ahead without rooting the phone. I'm grateful for sharing your knowledge here.
Click to expand...
Click to collapse
No rooting is required.
amiravandfar said:
here is my experience id like to share :
1-dial *#1234# with your dialer , and it shows you 3 numbers , screenshot it and save it somewhere diffrent than in your phone.
2-download your indonesian firmware for a32 from sammobile that has the same version ending characters as yours.
3-choose home csc from the package and put it in csc part of odin.
4- connect your pc to your phone with an original cable to a usb2 port (if you are on a pc , use backside ports of case) , disconnect every other usb devices.
5-click start of odin , the whole process should be completed in less than a minute and you will get native call recording without data loss.
Click to expand...
Click to collapse
Please I have downloaded and installed the Odin3 v3.14. I have downloaded the package and chosen the Home CSC and put it in the CSC section of Odin. I clicked START and nothing happens. Please help me. I have attached some images to help you understand my problem so you can guide me. Thank you.
amiravandfar said:
No rooting is required.
Click to expand...
Click to collapse
amiravandfar said:
here is my experience id like to share :
1-dial *#1234# with your dialer , and it shows you 3 numbers , screenshot it and save it somewhere diffrent than in your phone.
2-download your indonesian firmware for a32 from sammobile that has the same version ending characters as yours.
3-choose home csc from the package and put it in csc part of odin.
4- connect your pc to your phone with an original cable to a usb2 port (if you are on a pc , use backside ports of case) , disconnect every other usb devices.
5-click start of odin , the whole process should be completed in less than a minute and you will get native call recording without data loss.
Click to expand...
Click to collapse
After change csc ,when you make call is caller ID fail to identify number region? I guess it will fail..pls confirm
Please update, I need this as well. When you change the CSC does it do a reset? That is usually required. I'm trying to do it on my brothers phone and would rather not tell him i need to do a hard reset
Sir, I have done procedure step by step as you guided but in notification message shown, (Process completed 0/ successful 0). Nothing change in mobile too. please guide about your Point 4. Either we connect mobile with PC through USB cable without Flashing mode or put mobile in flashing mode first then connect to PC? Please guide step by step, because I am a simple mobile user not software engineer. Thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[email protected] said:
HI,
in my case, Galaxy A32 4g, it works great, take less than 30s. If I need to make a factory reset? My old CSC was OXM, is it still in the phone?
Best regards
Click to expand...
Click to collapse
Hi, I have performed step by step all procedure but not successful. Screen short attached. Please guide, either attache Mobile with PC in Flashing mode (using Home+Power+vol down key) or simply attach with USB cable and allow to use data?
Related
A new approach!
Spoof the firmware version on the device, to trick Kies2.0.
But as you might understand, messing with system files is always dangerous and the possibility for a brick is always present. Hopefully this will not occur I'm doing my best to avoid that.
You should not use this app if you cannot get into Recovery and/or Download mode! (3 button combo) As always when you modifies system files!
Remember to disable any lagfix before updating!
For everyones safety I would recommend doing a manual backup of /system/build.prop and the complete /efs folder including nv_data.bin
The app does this automatically to the internal SDCARD, but just to be on the safe side I would recommend a manual backup to the computer aswell.
There is three steps where a reboot is required after step 2. The app will tell you what to do.
Step1.
Backup everything. If this fails, step2 is not available.
Step2.
Set the new ProductCode and PDA. Reboot!
Step3.
Set CSC and Phone. Do NOT reboot. Connect to Kies2.0 and update!
This setting is not permanent and will go back to previous setting after reboot.
Remember to disable any lagfix before updating!
Done!
-------------------------------------------------------------
How to Restore
Press restore in the menu. Reboot required.
If something fails, please send me your logcat.
So here it is: SpoofFw - requires ROOT and BusyBox
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Online Market link
If you get problems to connect to Kies after you used this program, try remove the registry key "HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB"
Please let me now if it works out for you.
If you like my work, please consider a small donation.
Thanks a lot for your patch
Hi,
I'm new to the forum and am very interested in your work, at the moment the file to "fool " Kies 2.0 has not worked for me. I have the version 2.2 of Android 9000XWJPB/I9000FOPJP3/I9000XXJPP/I9000XWJPB and product code FOP. Sorry for my english, i'm from Spain.
what is new in this ??
It does'nt entirely work. Tried and it shows me update available.
But when it supposed to start downloading new rom, it say that latest software is already installed in my phone.Then Kies resets and start over offering update again.
So, I guess it detects the real rom in the phone.
Nice patch, though. Maybe you can see what is the problem.
Thanks
Same here - I just posted in the "original" theme about kies registry patcher.
Kies finds update, and when i start upgrading, the phone disconnects, and then after 1s reconects back. I cannot upgrade.
oh crap. didnt try to actually download it. thought it would work. I'll have a look at it. sorry guys.
No panic
Obviously some can upgrade, some cannot. We are the first with this problem.
I have jpx. Could this cause problems?
Those of you who have tried the patch, can you please post your info from the registry and tell me if it worked or not. Include both product code, hidswver, softwarerevision and modelname.
For me, in the registry is still JPY everywhere, after apply patch.
PRODUCT code : GT-I9000HKDXEU
HIDSWVER: I9000XXJPY/I9000OXAJPY/I9000XXJPY/I9000XXJPY
Model Name:GT-I9000
Software Revision: I9000XXJPY/I9000OXAJPY/I9000XXJPY/I9000XXJPY
HTH....
Running Kies 2.0.0.11014_49
HIDSWVER I9000XXJPO/I9000OXAJPO/I9000XXJPP/I9000XXJPO
Product Code GT-I9000HKDTMU
Model Name GT-I9000
Doesn't work unfortunately - it offers me an upgrade, appears to download the file then gives the Disconnected error.
I've also tried manually editing the registry as per kies 1.5 but no more luck.
I've tried on 2 PCs too.
HIDSWVER: I9000BUJP7/I9000GVD2JP5/I9000BUJP5/I9000BUJP7 (SofwareRev is same)
FW: I9000BUJP7/I9000GVD2JP5(CSC)/I9000BUJP5(modem)
PCode: GT-I9000HKDVD2 (VD2)
Kies: v2.0.0.11014_49
OS: Win7 Ultimate 64bit
I checked my registry but to no avail. Also tried deleting DeviceDB key to force kies into reconstructing it. It doesn't offer the fw upgrade option at all.
At least it's good to know someone is trying to develop a way to spoof kies 2.0. Did the patch work with any previous versions of kies 2.0?
I just got some another idea: could we try to hack ProductCode on device instead of on Kies side?
AFAIU ProductCode == CSC. I've googled we can change CSC in following ways:
1) *#272*HHMM# on Android 2.1 and older
2) *#272*IMEI# on Android 2.2 and newer
3) Opening preconfing with ADB
4) Editing /efs/nv_data.bin
Would it make Kies detecting different ProductCode?
There is still one more thing we have to consider: what if Kies detects our changed ProductCode but also firmware versions that were never released for given ProductCode?
Zajec5 said:
I just got some another idea: could we try to hack ProductCode on device instead of on Kies side?
AFAIU ProductCode == CSC. I've googled we can change CSC in following ways:
1) *#272*HHMM# on Android 2.1 and older
2) *#272*IMEI# on Android 2.2 and newer
3) Opening preconfing with ADB
4) Editing /efs/nv_data.bin
Would it make Kies detecting different ProductCode?
There is still one more thing we have to consider: what if Kies detects our changed ProductCode but also firmware versions that were never released for given ProductCode?
Click to expand...
Click to collapse
I have thought about it too. But we still need to change the PDA and PHONE aswell. But I have not yet located where they are stored. My guess is it's hard coded somewhere. Still the drivers need to take it from somewhere, the question is where.
LuffarJoh said:
I have thought about it too. But we still need to change the PDA and PHONE aswell. But I have not yet located where they are stored. My guess is it's hard coded somewhere. Still the drivers need to take it from somewhere, the question is where.
Click to expand...
Click to collapse
There is something like
getBasebandVersion, but I can't track RILRequest, how is is reading RIL_REQUEST_BASEBAND_VERSION... That could show us some file with baseband version maybe.
I have had some progress.
I have managed to change all necessary codes in the phone to be able to spoof Kies. This time I passed the step that the patch didnt!
Unfortunately it's not that simple, it requires root and changes system properties. But it's all reversible. I think I'll try to make an app of it during next week. First is a final exam on Monday.
watch this space.
well, it's much more fun to develop android application then study for an exam
I have successfully switched from XEN to XEE and to DBT.
I'm almost done, just some more bug testing. I'll probably release it tonight
Good news, wait for your release tonight.
luffarjoh said:
well, it's much more fun to develop android application then study for an exam
i have successfully switched from xen to xee and to dbt.
I'm almost done, just some more bug testing. I'll probably release it tonight
Click to expand...
Click to collapse
great news!!!
I have to push the release until tomorrow, I still have some fine tuning to do! Overall is works very well
hi to all
i have a bricked s8500 wave and please help me to flash it
my phone is dead
it can go to download mode and i try many times to flash it with a lot of frimwars with multiloader 5.65 and with three computer but no result
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my problem is : all the file flash Successful but multiloader can not flash apps_compressed.bin file
please help
WTF?!
in your screenshot i can see files taken from different FWs!!!!!!!!!
Bootfiles from XPKH3
Apps_compressed.bin from JPJKB1!!!(What is that FW!!!!)
Rest of files from XXJL2
Are you joking or what?
Please flash a FULL FW FILES FROM THE SAME FW
Best Regards
mylove90 said:
WTF?!
in your screenshot i can see files taken from different FWs!!!!!!!!!
Bootfiles from XPKH3
Apps_compressed.bin from JPJKB1!!!(What is that FW!!!!)
Rest of files from XXJL2
Are you joking or what?
Please flash a FULL FW FILES FROM THE SAME FW
Best Regards
Click to expand...
Click to collapse
no no no
first time i Full FW FILES FROM THE SAME FW and no result
this screen shot show i try all the ways with all the files from each frimware
sorry sorry my english is very bad
new screenshot for you
now on the download mode display write
abnormal sw detected !
upgrade only !
hmmmmmmmmmmmm
This issue is so strange
try to flash full 1.2 FW and make sure that your phone is Fully charged before starting that flash
you may face a problem that the phone won't display a battery indicator if that happened leave your phone about an hour on the charger then try flashing it
P.S : if your phone still can go to download mode then it is Semi-bricked not bricked
Please DONOT PANIC there is a solution for this
Best Regards
Thanks for replys
i flashed my dead phone with a bada 1.2 full frimware
and when i press download key in multiloader it say Error : Dbl Write [0.2s]
and now on my display phone in download mode write :
abnormal sw Detected !
upgrade only !
=====================
i downlad and test many frimwares ( bada 1.0 and bada 2.0 )
flash start only with S8500XPKH3 frimware
but with this frimware it can not flash apps_compressed.bin file and after restart my phone stay on samsung logo
Please DONOT PANIC there is a solution for this
Click to expand...
Click to collapse
how ? please write for me . i am really sad for my dead phone
dude i think you have no idea how to flash ur phone...........best you take it to service centre before you do more damage and nothing comes on the screen. my sincere advice!
sajjji said:
how ? please write for me . i am really sad for my dead phone
Click to expand...
Click to collapse
Have you tried with different Multiloader version? For 1.2 I used 5.62, I think...
yes
with different multiloader after i click on the port search . download mode is disable
only with multiloader 5.65 i can click on download after click port search
Hey look the Dbl error is due to the usb driver
Flash the bootloader of 1.2 alone and it will say Dbl error no worry then install kies Drive by going to C:\Program Files (x86)\Samsung\Kies\USB Driver and install it from there
Now try to flash the bootloader and the DBL ERROR Should be gone
After changing the bootloader from 2.0 to 1.2 flash the rest of 1.2 FW files
I hope you can do this alone
If this is too hard for you PM me and i'll chat with you to do step by step
Best Regards
Try on other PC.
Obviously, this problem has got to do with missing drivers.
Try to reinstall all necessary drivers and use the correct full firmware to flash.
Flash first with a working full bada 1.2 firmware. When all is ok, then you can try to flash the bada 2.0 firmware. And note, it's never advisable to mix firmwares randomly.
For more ref, please read this as well.
hi dud first download this fm delete the spaces from the link
hotfile . com/dl/118887798/b7adf6b/S8500JPKE1.rar . html
then download thil multiloader version
letitbit. net /download/52353.557da31e094070e195a55fca02b0/multiloaderv5.64.rar . html
now you have too charge you re phone for 3 hours now put it in download mode
open multiloader select bootfiles and all other selections in spl mode in full download
don t select the fota file
connect you re phone to pc and make shur the usb is fine
now multiloader should detect you re phone automaticly the click another time on search the click download and
i wish i gived you my help because that was my problem too error data errase hhhh
nouninou said:
hi dud first download this fm delete the spaces from the link
hotfile . com/dl/118887798/b7adf6b/S8500JPKE1.rar . html
then download thil multiloader version
letitbit. net /download/52353.557da31e094070e195a55fca02b0/multiloaderv5.64.rar . html
now you have too charge you re phone for 3 hours now put it in download mode
open multiloader select bootfiles and all other selections in spl mode in full download
don t select the fota file
connect you re phone to pc and make shur the usb is fine
now multiloader should detect you re phone automaticly the click another time on search the click download and
i wish i gived you my help because that was my problem too error data errase hhhh
Click to expand...
Click to collapse
only multiloader 5.65 detect my phone
in multiloader 5.62 or 5.64 when i click on port search no happen and download key is disable
but in multiloader 5.65 when i click on the port search it show ready lismore
and i can choose download key
why multiloader 5.64 can not detect my phone while 5.65 detect my phone ?
thanks for your gold helps
mylove90 said:
Hey look the Dbl error is due to the usb driver
Flash the bootloader of 1.2 alone and it will say Dbl error no worry then install kies Drive by going to C:\Program Files (x86)\Samsung\Kies\USB Driver and install it from there
Now try to flash the bootloader and the DBL ERROR Should be gone
After changing the bootloader from 2.0 to 1.2 flash the rest of 1.2 FW files
I hope you can do this alone
If this is too hard for you PM me and i'll chat with you to do step by step
Best Regards
Click to expand...
Click to collapse
not work and i see DBL ERROR with all frimwares while i can flash my phone with S8500XPKH3 frimware !!!!
but the app file can not write on the phone and phone stay on samsung logo
i installed last driver 2 days ago
ssud_V2_9_5_0916_whqled.exe
nouninou said:
open multiloader select bootfiles and all other selections in spl mode in full download
Click to expand...
Click to collapse
your frimware in not a full frimware and have not bootfile . how i select boot file ?
you say select bootfiles but your frimware have not bootfiles folder
and all other selections in spl mode in full download
Click to expand...
Click to collapse
what is spl mode ?
next time get some more knowledge first
hi dude follow this videos & you can use multiloader last version
if it don t work with you take you re phone to a samsung profissional & he will flash you re phone don t get scared cause this problem happend to me
the videos
delete the space
youtube . com/watch?v=9XfMn89vOmo
youtube . com/watch?v=S8RX0bKKp1A
hey
hi lads.i m having the same DBL error thingy. it looks like some older versions of the loaders work better than the most recent one to me so i do agree with yourman there that it has to be something with the drivers. can somebody point me to the right drivers? the ones i have tried so far dont work. or just point me to the right folder inside the skies folder,there s about 20 different folders inside the skies usb drivers folder
cheers
hey
i fixed mine now
i used MultiLoaderX_v5.65.exe (google it) and S8500XPKH3 (bada 2.0)
after that i had no more problems flashing the phone
if it still goes in to download mode,u can save it!!!!
give it a go.....
and i have this problem, i tested this but : ERR : Dbl Erase
can u help me ?
Hi All
This is a tutorial for changing the phone product code and should work with Wave I/II/III
This tutorial works under 32-bit copy of Windows only
Steps:-
1.First of all download this file : http://www.mediafire.com/?yahd09ptzv3ubir
2.Extract the file with WinRAR & you will get 3 other files
a.QPST b.Revskills c.Samsung qualcomm driver
3.Grab your Wave and enter the code *#197328640#
Choose [8] Common >>>[7]Service Configuration>>>[2]DIAG Service Config.>>>[2]Usb DM/CP....Then exit this menu
4.Connect your Wave to the PC...If it asks for a Usb mode choose Usb Debugging
5.You will notice that your PC will detect a new hardware and will ask you for its driver>>>Use Samsung qualcomm driver
6.Install both QPST & Revskills
7.Use QPST to assign a COM Port for the phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8.Now open Revskills and follow the Pics
to see current product code use Display NVItem and use 2757 as item no.
to change that code you need to write new one in Hex editior
Use write NVItem and use 2757 as item no. to write the new product code
proof of product code change
9.Grab your Wave and enter the code *#197328640#
Choose [8] Common >>>[7]Service Configuration>>>[2]DIAG Service Config.>>>[3]Usb UART/AP....Then exit this menu and restart the phone
Revskills part on youtube
If anyone got any question about this please ask
Best Regards
Thank u very much, will try tomorrow. maybe this will help to get my wave back in line with samsung kies. My product code was baaxen but with flashing to 2.0 it changed to baakor and kies would not let me update. hope this will help.
kolk11 said:
Thank u very much, will try tomorrow. maybe this will help to get my wave back in line with samsung kies. My product code was baaxen but with flashing to 2.0 it changed to baakor and kies would not let me update. hope this will help.
Click to expand...
Click to collapse
i hope it works for you
Is it possible to change the product code from GT-S8500BAAXTC to SHW-M210SBAASKT which is the same product with S8530 using this method even also vice versa? Because only Samsung Apps Korea is blocked to download an apps from global models such as S8500 and S8530. Not only from global to Korean model but also Korean model cannot download an apps from other countries.
Sent from my GT-I9100 using XDA App
If the phone's IMEI is not Korean maybe you will end up with a blocked phone that can't access Samsung Apps at all
I don't recommend doing this
This tutorial is for fixing product code if it was changed by accident and not tested for other purposes
Best Regards
I think Samsung Apps doesn't check the IMEI because there was a way to download an app from UK Samsung Apps by Korean model (SHW-M210S).
Actually, it was not that technical method, it just needed fast hands and good eyes
Of course, Sammy blocked it again last week.
Didnt work (yet)
So I tried to get back in line with kies and to turnback my productcode to XEN
SO far didnt work this is what i did:
I flashed back to an old full 1.0 bada firmware version and tried to change my productcode after that. I can connect to qpst and revskill but...
Revskill gives me when I fill in Item 2757; 26
When i click check commands i get: unknown response
Maybe i should flashback to bada 2.0 after that change productcode and then go back to my old updatable dutch firmware
or am i overlooking something
Edit: changed firmware to XXJID (bada 1.2) now I get error: failed in call to write file
Will reboot everything and try again
Did you use QPST to assign the COM Port number???
Assign that number then use it with revskills
If you phone COM Port is not listed in revskills
Make sure that your PC can find your phone as a Samsung HS-USB in the device manager
Don't write command number in revskills...it gets written after pressing let's go
Watch the youtube video for more understanding
Best Regards
mylove90 said:
Did you use QPST to assign the COM Port number???
Assign that number then use it with revskills
If you phone COM Port is not listed in revskills
Make sure that your PC can find your phone as a Samsung HS-USB in the device manager
Don't write command number in revskills...it gets written after pressing let's go
Watch the youtube video for more understanding
Best Regards
Click to expand...
Click to collapse
To bad still getting error failed in call to writefile (see my edit previous post)
Going to flash back to bada 2.0 change productcode and than flash to old updatable firmware
Update; Flashed some back and forward and reinstalled revskills. Now i can see my productcode which is BAAKOR and I want it to be BAAXEN.
So what do I have to change now and where u say: to change that code you need to write new one in Hex editior. What do I have to put in where in order to change my productcode
New code in hex editor
The tutorial tells me: to change that code you need to write new one in Hex editor
How do I know what values should be filled in there to change my productcode to BAAXEN
it is 47542D533835303042414158454E
Did you manage to connect your phone finally ?!
My mistake
Yes after reinstalling revskill I managed to connect.
this afternoon I will change to BAAXEN with the info you provided
Hope this will work (btw how do you know it should be the input u suggested?)
I used PC software called HXD hex editior
Made a new text document and write string data in it in the right side and as you can see in the picture it converted string data to hex value and that is it
Best Regards
mylove90 said:
I used PC software called HXD hex editior
Made a new text document and write string data in it in the right side and as you can see in the picture it converted string data to hex value and that is it
Best Regards
Click to expand...
Click to collapse
Okee but how do u know what string data to write to change productcode to baaxen? (trying to learn / understand)
kolk11 said:
Okee but how do u know what string data to write to change productcode to baaxen? (trying to learn / understand)
Click to expand...
Click to collapse
You don't need to memorise or know what code to write.
You can use this online hexadecimal editor.
Open the link, and paste the value you wish to convert to hex.
Example, to convert GT-S8500BAAXEN.
Just copy GT-S8500BAAXEN into the upper column of the page, and press Convert.
The value 47542d533835303042414158454e will display at the bottom column.
Any idea for S8600 Product Codes? Especially for :
I've tried GT-S8600HKATPL, but this seems wrong...
Code:
GT-S8600??????
S8600BOKJ1 (SW Version)
S8600TPLKJ1 (CSC Version)
Confirmed, because downloadable
Code:
[B]GT-S8600HKAXEF[/B] (France)
S8600XXKJC (SW Version)
S8600OXAKJB (CSC Version)
See KIES/FUS...
http://forum.xda-developers.com/showpost.php?p=19085697&postcount=19
Maybe now also S7250 and S5380 online?
Best Regards
Succesfull
I managed to connect to revskills (after reinstalling twice) and updated succesfully to BAAXEN and Yes kies told me there was an update available. So now Im back in line with kies with the latest official firmware. Now waiting for samsungs update to bada 2.0 cause the beta versions were promissing!
Thank u all for help and information!
Thanx mate, posted in badablog.ru
Hello,
I have a Wave 3 S8600 that when connected to Kies in registry has the product code set to XXXXXXXXXXXXXX . I tried changing the product code in the registry but kies 2 is ignoring this it seems.
Do you know how can I change this using PST? I tried the steps described in first post but my phone doesn't have Usb DM/CP. It has:
1. USB DM []
2. UART [*]
3. USB ACM []
Upon setting the Usb DM and after that connecting to PC it doesn't do anything, QPST is not seeing any new port. According to kies registry should be on Com 13
I am using a Windows 7 32 bit.
Thanks
S8600 is only Qualcomm CPU as I know...
Which Firmware you have...
*#1234#
Btw. You could make please Screenshots from Menu... it seems little bit different...
Maybe somewhere else also to change... to have access to Qualcomm Diagnostic port...
Best Regards
All right everyone here I will give u the method of writing IMEI & No Sim Detection problem of Karbonn A5/W619/Walton Primo & Karbonn A7/S01..
Many of the User of A5 are having problem with the IMEI & Mobile network lost and no sim is detecting while upgrading or downgrading Baseband.
As I have been searching for solution about a month and there is no specific solution regarding this problem..Through some ideas from different sites & developer and experimenting with my own device I have managed to write back both IMEI & enabled mobile network.
Note: For A7 user Please download AP of your device not this one.
Software & Other Requirement:
1.Stock AP of Karbonn A5/W619/Walton Primo (Original Stock GB Rom).
Link : http://jabadbd24.blogspot.com/2013/03/walton-primo-karbon-a5-downgrade-to-gb.html
2.Baseband- V3025 & V3070 both.
3.Fastboot 1.0.2.4 (for downloading AP+BP to device).
4.Drivers.
5.QPST Modem Tool V1.1 (for writing IMEI).
Link : http://www.mediafire.com/download/c9nv2zc1a233s13/Qualcomm_Modem_Tools%20V1.1.rar
6.QPST 2.7 (for restoring network).
Link : http://www.mediafire.com/download/kna2s9x3z06gcuu/QPST_2.7_378.zip
*********************************** FB ID= facebook.com/dj.rifat*****************************************************
Procedure:
A. (BP+AP) Download:
1.If u have upgraded your device to ICS then u have to Downgrade to GingerBread. First goto recovery mode(CWM/TWRP).Goto mount and select all and wipe data,system,boot,cache,android secure,SD-ext.Then Power off the device.
2.Then Update BP.First with V3025 (591347_8376_WCDMA_V3025) & then with V3070 (591347_8376_WCDMA_V3070).
[note: before updating V3070 baseband,Copy and replace 'appsboot.mbn' & 'appsboothd.mbn' this two files from the AP folder to V3070 folder in ur PC.]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3.Then update Gingerbread AP in Fastboot mode (green screen on device).
4.Turn on mobile while it is connected with the PC.PC will detect new hardware.One from them u installed before while BP Download..
5.Goto Device Manager of PC.U will find three new hardware.Install driver for them.As Shown below:
B. Write IMEI
1)Unzip “Qualcomm_Modem_Tools_V1.1.rar”, open Qualcomm_Modem_Tools.exe, (Turn on ADB Debugging from Application>Development>ADB Debugging from ur mobile)
interface as blew:
(2) Select port. Port should be same as modem port.
(3) Write IMEI. Input new IMEI, click “write”.
(4) Complete writing IMEI.
(5) Then click read, confirm the new IMEI is successful written
C.Fixing NO sim problem and Network.
Now Install ''QPST 2.7.398.exe'' on PC.
(1) Open “QPST Software Download”(Start>Programs>QPST Software Download) and click Restore, interface as below:
(2) Power on handset, connect usb cable and select port by pressing browse as shown below.
(3) Now press the 2nd browse button and navigate to the folder of V3070 Baseband folder ( '591347_8376_WCDMA_V3070' this folder) and select ''591347_8376_WCDMA_V3070.qcn'' file. Now press START ,if you have done everything correctly it will go good.
(4)Restart your mobile.Now goto to Backup Tab and type a name in QCN file column according to ur choice for better understanding which qcn file is the working backup and select location where you wanna save it and press start.This qcn file is important because if u lost ur IMEI sometimes during upgrade or downgrade restoring this file will
recover ur IMEI & network.
This way I have solved my problem.I apologize As I am not a expert in this field if any mistake done by me.
If you don't understand any steps or having problem please let me know will try my best to help you.
You can also find me in facebook/dj.rifat if need help.
Thanks.
Hit like If I have helped you.
Gr8 work bro.. i appritiate your work..!
Rifat.ahmed08 said:
All right everyone here I will give u the method of writing IMEI & No Sim Detection problem of Karbonn A5/W619/Walton Primo & Karbonn A7/S01..
Many of the User of A5 are having problem with the IMEI & Mobile network lost and no sim is detecting while upgrading or downgrading Baseband.
As I have been searching for solution about a month and there is no specific solution regarding this problem..Through some ideas from different sites & developer and experimenting with my own device I have managed to write back both IMEI & enabled mobile network.
Note: For A7 user Please download AP of your device not this one.
Software & Other Requirement:
1.Stock AP of Karbonn A5/W619/Walton Primo (Original Stock GB Rom).
Link : http://jabadbd24.blogspot.com/2013/03/walton-primo-karbon-a5-downgrade-to-gb.html
2.Baseband- V3025 & V3070 both.
3.Fastboot 1.0.2.4 (for downloading AP+BP to device).
4.Drivers.
5.QPST Modem Tool V1.1 (for writing IMEI).
Link : http://www.mediafire.com/download/c9nv2zc1a233s13/Qualcomm_Modem_Tools%20V1.1.rar
6.QPST 2.7 (for restoring network).
Link : http://www.mediafire.com/download/kna2s9x3z06gcuu/QPST_2.7_378.zip
*********************************** FB ID= facebook.com/dj.rifat*****************************************************
Procedure:
A. (BP+AP) Download:
1.If u have upgraded your device to ICS then u have to Downgrade to GingerBread. First goto recovery mode(CWM/TWRP).Goto mount and select all and wipe data,system,boot,cache,android secure,SD-ext.Then Power off the device.
2.Then Update BP.First with V3025 (591347_8376_WCDMA_V3025) & then with V3070 (591347_8376_WCDMA_V3070).
[note: before updating V3070 baseband,Copy and replace 'appsboot.mbn' & 'appsboothd.mbn' this two files from the AP folder to V3070 folder in ur PC.]
3.Then update Gingerbread AP in Fastboot mode (green screen on device).
4.Turn on mobile while it is connected with the PC.PC will detect new hardware.One from them u installed before while BP Download..
5.Goto Device Manager of PC.U will find three new hardware.Install driver for them.As Shown below:
B. Write IMEI
1)Unzip “Qualcomm_Modem_Tools_V1.1.rar”, open Qualcomm_Modem_Tools.exe, (Turn on ADB Debugging from Application>Development>ADB Debugging from ur mobile)
interface as blew:
(2) Select port. Port should be same as modem port.
(3) Write IMEI. Input new IMEI, click “write”.
(4) Complete writing IMEI.
(5) Then click read, confirm the new IMEI is successful written
C.Fixing NO sim problem and Network.
Now Install ''QPST 2.7.398.exe'' on PC.
(1) Open “QPST Software Download”(Start>Programs>QPST Software Download) and click Restore, interface as below:
(2) Power on handset, connect usb cable and select port by pressing browse as shown below.
(3) Now press the 2nd browse button and navigate to the folder of V3070 Baseband folder ( '591347_8376_WCDMA_V3070' this folder) and select ''591347_8376_WCDMA_V3070.qcn'' file. Now press START ,if you have done everything correctly it will go good.
(4)Restart your mobile.Now goto to Backup Tab and type a name in QCN file column according to ur choice for better understanding which qcn file is the working backup and select location where you wanna save it and press start.This qcn file is important because if u lost ur IMEI sometimes during upgrade or downgrade restoring this file will
recover ur IMEI & network.
This way I have solved my problem.I apologize As I am not a expert in this field if any mistake done by me.
If you don't understand any steps or having problem please let me know will try my best to help you.
You can also find me in facebook/dj.rifat if need help.
Thanks.
Hit like If I have helped you.
Click to expand...
Click to collapse
Thank you very much. can u please tell about karbonn a7 plus stock AP where to find. i m having this mobile and facing the same problem.
Thank you so much!!!
I made an account just to say thank for this GUIDE. I was looking and waiting for a year for this GUIDE. THANK YOU SO MUCH!!!:good:
#Respect
Just register an account to post reply. Great work bro, help me pick my phone up from hell :laugh::good::good::good:
vktisnow said:
Thank you very much. can u please tell about karbonn a7 plus stock AP where to find. i m having this mobile and facing the same problem.
Click to expand...
Click to collapse
got my problem solved. thanks a lot for this awesome guide
Anybody can give proper link for the Files.. Most of them are DEAD !!!
i found Port number (COM6).. after this i am unable to write IMEI number(getting error Write IMEI fail). i have entered my old imei number.
when i dial *#06# in my mobile displaying as below:
IMEI1:
IMEI2:
both blanks...(So i entered old IMEI numbers).
And from where can i get new IMEI numbers?
can you please help me on this.
Does this work for SM-A520FDS?
You can find out your current customization by dialling *#*#SERVICE#*#* -> Service info -> Software Info -> Customization Version. This guide explains how to flash another official Sony firmware of different customization onto your Xperia 1 II XQ-AT51. You do NOT need to unlock your bootloader to do this.
Download and install FlashTool from http://www.flashtool.net
On Windows you will then need to install the Flashmode and Fastboot drivers.
On Linux you do not need to install drivers, but you do need to set some udev rules.
On Windows you will first need to reboot Windows with driver signature enforcement disabled to do this. Then install the Flashmode and Fastboot drivers from the installed C:\FlashTool\drivers\Flashtool-drivers.exe:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Open Flashtool and let the device database sync
This may fail on Windows if you have Windows Defender Antivirus Real-time protection running -- disable Windows Defender Antivirus Real-time protection in Windows settings:
Click on the XperiFirm icon to get a list of official Sony firmwares:
Select the XQ-AT51 on the left, and the select the particular Customization you would like. Then click on the box below "Available Firmware" to start downloading:
Once the Firmware has downloaded, close XperiFirm and then let FlashTool do some processing on the downloaded firmware to create a .ftf file of the firmware in your C:\Users\<username>\.flashTool\firmwares folder.
This step is no longer needed as the FlashTool database has now been updated. This step is temporary and will not be required once the FlashTool devices database has been updated for the XQ-AT51.
Download the .fsc file and .properties file and unzip them into a new folder in C:\Users\<username>\.flashTool\mydevices\XQ_AT51 . Rename the .fsc file to "58.0.fsc" to use it with more firmware versions. Then in FlashTool's menu choose Devices->Manage->Import -- this will give an error, but ignore.
Now click on the Flash button and choose Flashmode.
Set up the Firmware Selector window as follows - this setup will erase all data on your phone. Then click Flash:
When prompted, power off your phone and then hold down the volume down key on your phone and connect a USB cable from the phone to your computer (do NOT use the UCB24 USB C - USB C cable that comes with the phone -- the UCB24 is for charging only and does not work -- you need to use a quality USB C - USB A cable or try the UCB32 instead). Keep the volume down key held until the notification light turns green. The flashing process will now be prepared.
When you get a prompt saying "A FSC script is found. Do you want to use it?" choose yes. An error of "those data are not in the fsc script: persist, reset-non-secure-adb" is entirely normal, so choose Yes, and let the flashing commence. If you get a prompt asking you to select a partition, select the top option for 128GB storage and the bottom for 256GB storage -- if unsure click cancel. If you get "ERROR:null" then repair your phone with Xperia Companion first.
Flashing will be complete when you see "Sync status : OKAY".
If you are worried as to whether the flashing worked or not, you can always then do a software repair using the Xperia Companion software. Please check your storage after flashing - some users are reporting that they only are seeing 128 GB of storage instead of 256 GB - please repair with Xperia Companion if you see this and report in the comments below.
I bought the phone from O2UK with the O2 firmware and managed to successfully flash it to the 1321-7192 Customized UK firmware with FlashTool. I now have VoLTE and WiFi-Calling on Vodafone UK .
FlashTool settings:
Here is the before and after Software Info in the *#*#SERVICE#*#* menu:
Here is the before and after in the *#*#4636#*#* Phone Information menu:
EDIT: I turned off and on again the WiFi Calling setting in My Vodafone and now Wi-Fi calling is also provisioned!:
UPDATE: After the 58.0.A.3.88 update on Vodafone with Customized UK, I no longer see Wi-Fi calling as being provisioned, nor do I get the Wi-Fi Calling menu option in network settings. However, Wi-Fi calling is actually still working and still turns on automatically when I get low cellular network strength.
brocnical said:
FlashTool settings:
Here is the before and after Software Info in the *#*#SERVICE#*#* menu:
Here is the before and after in the *#*#4636#*#* Phone Information menu:
Click to expand...
Click to collapse
Does this unlock the ability to have dual sim? I know you would still need a different sim tray. but if the phone will support dual sim after flashing that would make a huge difference for me.
Fatmonk8 said:
Does this unlock the ability to have dual sim? I know you would still need a different sim tray. but if the phone will support dual sim after flashing that would make a huge difference for me.
Click to expand...
Click to collapse
No idea. Are there not more hardware differences than just the SIM tray?
brocnical said:
No idea. Are there not more hardware differences than just the SIM tray?
Click to expand...
Click to collapse
I have no idea, On my OnePlus 7 Pro the only difference was the software and the sim tray, converted it to in global software and replaced the sim tray and dual sim worked.
Hoping its the same for this phone too.
I've managed to do this, but seems like I am only seeing 128GB of storage now? Is that normal, I didn't check before.
kasiopc said:
I've managed to do this, but seems like I am only seeing 128GB of storage now? Is that normal, I didn't check before.
Click to expand...
Click to collapse
No, that is not normal:
You should only have 128GB on the Japanese models. Did you flash a Japanese firmware?
brocnical said:
No, that is not normal:
You should only have 128GB on the Japanese models. Did you flash a Japanese firmware?
Click to expand...
Click to collapse
Customized UK 58.0.A.3.31, and used your files provided above.
---------- Post added at 07:46 PM ---------- Previous post was at 07:21 PM ----------
Works fine now after running Software repair on Xperia Companion. Stayed on the generic firmware as well.
I've gone to try this and Flashtool can't see any downloaded firmwares. In your screenshot the left panel has the model tree, mine is blank. The location is correct as I can see the files there in Explorer. Same both my computer's. Odd.
sidneylopsides said:
I've gone to try this and Flashtool can't see any downloaded firmwares. In your screenshot the left panel has the model tree, mine is blank. The location is correct as I can see the files there in Explorer. Same both my computer's. Odd.
Click to expand...
Click to collapse
Did you download the .properties file to the exact folder specifed and did you do a Devices->Manage->Import?
Got it, I missed the bit about renaming the FSC to 58.
Don't remember having to do this when I used to use this!
brocnical said:
Did you download the .properties file to the exact folder specifed and did you do a Devices->Manage->Import?
Click to expand...
Click to collapse
Hey,
I saw your post here: https://forum.xda-developers.com/showthread.php?p=82876277#post82876277
here: https://forum.xda-developers.com/showpost.php?p=82876571&postcount=2
and here: https://forum.xda-developers.com/showpost.php?p=82896159&postcount=2
where each post refers the other in 3 different threads.
Considering that you have already put the effort to write these, would you mind to aggregate this information in a single post, possibly the first post of this thread and rename it to a guide?
stsdema28 said:
Hey,
I saw your post here: https://forum.xda-developers.com/showthread.php?p=82876277#post82876277
here: https://forum.xda-developers.com/showpost.php?p=82876571&postcount=2
and here: https://forum.xda-developers.com/showpost.php?p=82896159&postcount=2
where each post refers the other in 3 different threads.
Considering that you have already put the effort to write these, would you mind to aggregate this information in a single post, possibly the first post of this thread and rename it to a guide?
Click to expand...
Click to collapse
Done.
I have also made a pull request in the FlashTool devices db so that we won't have to do the .fsc and .properties bit in the future.
I have two quick (hopefully related) questions.
1. Has anyone tried to flash XQ-AT51 firmware on XQ-AT52? Obviously, I know Dual SIM may be impacted, but does it work? Any other issues?
2. Is there a CSC version of XQ-AT51 software for USA yet? I couldn't find it on XperiFirm.
Thank you so much!
KlausWillSeeYouNow said:
1. Has anyone tried to flash XQ-AT51 firmware on XQ-AT52? Obviously, I know Dual SIM may be impacted, but does it work? Any other issues?
Thank you so much!
Click to expand...
Click to collapse
I would like to know this too, we might have an answer soon enough since it looks like some people have ordered the 1 ii from wandamobile which basically ships the HK dual sim version.
I'm getting an issue when I'm flashing either the Customized UK rom or the O2 one where it gets stuck installing dsp.000, have you seen this before?
If I exclude dsp.sin from the flash it completes fine but the screen resolution is really basic so I'm assuming its the display drivers. Running a repair from the Sony Companion after the flash fails.
Stuck! Can anyone help? TIA
Code:
26/037/2020 07:37:06 - INFO - (CommandFlasher.java:719) - signature status : OKAY
26/037/2020 07:37:06 - INFO - (CommandFlasher.java:722) - erase:dsp_a
26/037/2020 07:37:06 - DEBUG - (USBFlash.java:85) - Reading packet from phone
26/037/2020 07:37:06 - DEBUG - (USBFlash.java:93) - IN : [email protected]
26/037/2020 07:37:06 - INFO - (CommandFlasher.java:726) - erase status : OKAY
26/037/2020 07:37:06 - INFO - (CommandFlasher.java:732) - sending dsp.000
26/037/2020 07:37:06 - INFO - (CommandFlasher.java:735) - download:04000000
26/037/2020 07:37:06 - DEBUG - (USBFlash.java:85) - Reading packet from phone
26/037/2020 07:37:06 - DEBUG - (USBFlash.java:93) - IN : [email protected]
electric0ant said:
I would like to know this too, we might have an answer soon enough since it looks like some people have ordered the 1 ii from wandamobile which basically ships the HK dual sim version.
Click to expand...
Click to collapse
Agreed 100%. I would like to flash the USA firmware from the XQ-AT51 on my XQ-AT52, but (a) I don't know if it's advisable to do that, and would like to hear from someone who has; and (b) it doesn't appear that there is USA firmware yet for the XQ-AT51!
Hope we get our answer soon.
Apologies if its a noob question but if I flash different region software, will I loose DRM keys?
No
Ok managed to fix my issue, In the end I swapped the cable I was using which didn't occur to me as parts of the flash worked so assumed connectivity was ok.
I originally used the USB C - USB C cable that came with the phone. Swapped that to a USB C - USB A cable and the flash completed successfully!
Massive sense of relief after many hours of messing around with it! Hopefully this might help someone in the future