Develop Bugs

[Guide][TWRP][Recovery][Root] Leagoo T5C (Spreadtrum SC9853i)

Hello everyone.
I'm no expert, but I bought the Leagoo T5C and I tried to flash TWRP and and to use it to root the phone, and after hours of digging through the 4pda thread with Google Translate and some trial-and-error I succeeded.
I'd like to share with you what I did in the form of a guide.
As always, I take no responsibility if this bricks your phone.
Prerequisites:
1. My phone came with the ROM version OS2.1_E_20180310, if yours differ you can download the 20180310 ROM from the Leagoo website:
http://www.leagoo.com.my/support/firmware/
This procedure may or may not work for other ROMs. I don't know.
2. Download this archive:
http://www.mediafire.com/?03sggy76mqouj16
It contains all the necessary files.
Alternatively, download all the files used from their sources:
original_boot.img and twrp3.0.3full.img (by jemmini) downloaded from 4pda:
https://4pda.ru/forum/index.php?s=&showtopic=871989&view=findpost&p=72084529
patched_boot.img (by leo2m) downloaded from 4pda:
https://4pda.ru/forum/index.php?showtopic=871989&view=findpost&p=70143767
Magisk-v17.1.zip (by topjohnwu) downloaded from XDA:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
(Before Magisk I tried SuperSU but it failed to install)
3. You will need the ADB+Fastboot binaries. If you don't have them you can get them here:
https://forum.xda-developers.com/showthread.php?t=2588979
4. Copy twrp3.0.3full.img and Magisk-v17.1.zip to your ADB directory on the PC.
Copy original_boot.img and patched_boot.img to your phone's storage.
optional: Install leagoo T5C ADB driver.
The only driver that worked for me was this driver from Xiaomi:
http://bigota.d.miui.com/tools/xiaomi_usb_driver.rar
(8,672,261 bytes, CRC32: B62ED7DB)
optional: Allow unlocking the bootloader (OEM unlock) and usb debugging from developer options (If you don't know how to get to the developer options google it). I did this prior to everything but I don't think this step is necessary (although it can't hurt).
Lets start:
1. Put the phone in fastboot mode, either by adb (adb.exe reboot bootloader) or by entering stock recovery and selecting to reboot to fastboot.
To enter recovery turn off the phone and then hold both the power button and Vol- button together until you see the lcd turn on. Then you can release both buttons.
2. Connect the phone to the PC via usb and install the fastboot drivers (mine installed automatically so I don't know where to download from).
3. Open a command prompt and flash the recovery and boot images by executing the commands:
Code:
fastboot devices
fastboot flash recovery twrp3.0.3full.img
fastboot flash boot patched_boot.img
fastboot reboot
The phone will reboot to the Android OS.
4. Enter recovery by button press (see step 1) or by ADB (adb.exe reboot recovery).
5. Now, this is the tricky part. TWRP will work but only for a few seconds and then the phone reboots. Took me a few tries but I managed to make it stop rebooting by quickly swiping to allow modifications then quickly rebooting to recovery (TWRP>Reboot>Recovery).
6. I installed the original boot (TWRP>Install>Install image>original_boot.img) but I don't think this step is necessary (If you choose to do this DON'T EXIT TWRP until you do step 7).
7. Install Magisk.
8. Reboot to system.
You're done!

Help me please
Sir, can u give me files (boot.img &recovery.img) from stock rom? Please. I wanna back to stock, replace twrp. This because I can't flash rom with spd flashtool. Spd flashtool need stock recovery, right??
Please help me
I can't download from 4pda, maybe it's removed or something like no available.
Thanks Sir

Done
I can get that file from .pac
Use spd flashtool. Load the pac then open folder image in spd folder
Boot&recovery now back to stock
Now my problem is i can't flash by spd flashtool. I use research download.exe
Nv_Lte , secvm; progress failed: uart send error

Disaster!
Ciao a tutti,sono nuovo e non so bene se stó scrivendo nel posto giusto, però vi ringrazio comunque per l'attenzione. Ho fatto un macello,in modalità recovery con twrp,ho swippato per errore la pulizia dell'intero sistema. Perciò ora non c'è più nulla. Resta solo la scritta android perennemente accesa,fino a batteria scarica. E da pc non riesco a trovare il modo di reinserire né recovery,né fastboot nemmeno collega il bootloader. Qualcuno saprebbe indicarmi cosa posso fare per reinstallare l'intero sistema? Vi ringrazio comunque, e buona giornata. Fredy84. This language is Italian

Fredy84 said:
Ciao a tutti,sono nuovo e non so bene se stó scrivendo nel posto giusto, però vi ringrazio comunque per l'attenzione. Ho fatto un macello,in modalità recovery con twrp,ho swippato per errore la pulizia dell'intero sistema. Perciò ora non c'è più nulla. Resta solo la scritta android perennemente accesa,fino a batteria scarica. E da pc non riesco a trovare il modo di reinserire né recovery,né fastboot nemmeno collega il bootloader. Qualcuno saprebbe indicarmi cosa posso fare per reinstallare l'intero sistema? Vi ringrazio comunque, e buona giornata. Fredy84. This language is Italian
Click to expand...
Click to collapse
hi fredy! sorry late reply.
my T5C is dead too. maybe a year now. do u try flash using Spd flash tools ? look it on forum dot hovatek dot com
need driver for pc, rom t5c/ pac file, spd flash tool
beside hovatek, u can refer to chinamobilemag dot de
I hope u can revive your phone
I still try it too..
always stuck on uart send error. don't know why

Hi,with a friend we use driver for spredtrum chip and everything than i read on every internet page,open pac file ecc ecc. but at least,i got only twrp in a system,nothing else... I whant to emprove with linux os in a pc,maybe in these days i try this and owever,i wrote if it is a good options. Thank'4 all!!!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
finally I can charge my phone. I not power on yet. I'll turn on when 90% or full charge. hope all will be fine
I use another software to flash.

Hi guys,
It's been a while, and I don't know if this thread is still alive, though by the look of it (last post goes back a couple weeks), it should be.
I too have a Leagoo T5c, that I bought on GearBest in December 2017, so I got one of the first ones to hit the market, I presume.
Phone still works fine, aside from the battery that holds charge less and less as time goes by, but that's to be expected.
The point of my posting here is, Where can I find the *truly* latest ROM for this phone? I try OTA every once in a while, and the phone tells me the 20180310 update is the latest, but on NeedRom, they "offer" (for a fee, which I refuse to pay for such a bargain phone) a ROM that goes back to August of 2018.
I don't want to shell out an extra-dime for this phone, which serves its purpose day to day. I only want to install the latest security updates and a newer Android version if it comes in the package, otherwise I'll make do with what I have until I can buy a more recent phone.
So, can anyone point me in the direction of a *free* (as in, free beer) and more recent than March 2018 ROM download for my Leagoo T5c?

Hi stuff!!! nice to see u again ?
my latest .pac is August release. I not use it, because mine is totally dead
https://cutt.ly/4UglyStuff
when the future come, buy xiaomi snapdragon.
much better
that .pac from 4pda
I have told you on your OP

iYanLiD said:
Hi stuff!!! nice to see u again
my latest .pac is August release. I not use it, because mine is totally dead
https://cutt.ly/4UglyStuff
when the future come, buy xiaomi snapdragon.
much better
that .pac from 4pda
I have told you on your OP
Click to expand...
Click to collapse
Hi iYanLiD!
Yep, it's been a while. Lots of work, too little time, but that question was always at the back of my mind. I too am waiting for the right opportunity to buy a more modern phone. If I can, I'll go with the new Pixel 4a, I think, because it checks all the right boxes for me: great photo, good storage (128GB, non-extensible, though), decent RAM (6GB is a minimum, these days), and a 3.5 mm jack audio, plus you have the guarantee of immediate security updates, which I sorely miss with the Leagoo, however good it is for the price in other areas.
Thanks for the .pac, man (got it?) I'm downloading it right now. Will install it over the weekend, I'll let you know if I bricked my phone or not... :laugh:
See ya!

wish u all dbest man!
if I have opportunity, I will get redmi 10x pro.
it's mediatek, but it's okay
other specs really suits me
I'm waiting your t5c news ??

UglyStuff said:
Hi iYanLiD!
Yep, it's been a while. Lots of work, too little time, but that question was always at the back of my mind. I too am waiting for the right opportunity to buy a more modern phone. If I can, I'll go with the new Pixel 4a, I think, because it checks all the right boxes for me: great photo, good storage (128GB, non-extensible, though), decent RAM (6GB is a minimum, these days), and a 3.5 mm jack audio, plus you have the guarantee of immediate security updates, which I sorely miss with the Leagoo, however good it is for the price in other areas.
Thanks for the .pac, man (got it?) I'm downloading it right now. Will install it over the weekend, I'll let you know if I bricked my phone or not... :laugh:
See ya!
Click to expand...
Click to collapse
Well, I've got everything I need, but the flashing application just won't recognize my device. Drivers are installed, application starts, loads the .pac file, but the line where my device is supposed to be is void, so clicking on the Download button doesn't do anything.
I'm not trying to root my device here, just trying to flash a more recent ROM, so any help and advice would be most welcome.

EDIT: scratch that, apparently, you have to press ALL the physical buttons at once to install. That is, the Power button and both the Volume Up and the Volume Down buttons.
My phone is now running the ROM gently supplied by iYanLiD. I just have to reinstall my apps, and my music. Can't live without it. Thanks a bunch, and see you next time (à la GSM Arena)!

I gotta hand it to you, C4lculated, you had it down pat... Almost... In my case, I had to reinstall bootloader drivers from Device Manager because otherwise, I was stuck with the infamous "waiting for device" message in Command Line.
After that, everything went well, and my T5c is now rooted... And still working... So far, so good!
Now, I made the mistake (?) to backup the factory image AND the installed image, which means I'm now down over 10GB in storage because of that. Is there a way in TWRP to delete one or the other, and reclaim at least 3.5GB?

hi UglyStuff
how about:
Twrp > mount > check 'system' > back > advanced > file manager. Navigate to the file and choose 'delete'.
or file explorer root?
or maybe titanium backup
please be careful

Actually, I did that directly from file explorer when in Android, then rebooted the phone, and everything was OK.
That was ***before*** I tried to install Android 11 on my phone, that is... (facepalm emoji)

Hi guys, today after thousands of experiments i try to flash my leagoo t5c rom. Later 200: uart errors!!!At least,i start every driver and tools for windows than i download from web,i'll take original Rom from Leagoo site and the tools,after various problems and tools,for many different errors,i see a tutorial,and them...The secret is,when u got to start download whit spd tool(really i used UPGREADABLE,or something same but it's chinese version similar of SPD), at phone off, push up and down volume at firsts 15 20 seconds of download. I hope it working as mine. Sorry i'v not link,cause download become in a lucky moment. Says me if for u is the same! Bye!

Fredy84 said:
Hi guys, today after thousands of experiments i try to flash my leagoo t5c rom. Later 200: uart errors!!!At least,i start every driver and tools for windows than i download from web,i'll take original Rom from Leagoo site and the tools,after various problems and tools,for many different errors,i see a tutorial,and them...The secret is,when u got to start download whit spd tool(really i used UPGREADABLE,or something same but it's chinese version similar of SPD), at phone off, push up and down volume at firsts 15 20 seconds of download. I hope it working as mine. Sorry i'v not link,cause download become in a lucky moment. Says me if for u is the same! Bye!
Click to expand...
Click to collapse
The best flashing tool is the one Leagoo provides on their support page (here; download link: here), along with the latest official build, date March 2018.
My own T5c runs the August 2018 build iYanLiD was kind enough to supply (here), and is now rooted too, though I honestly don't see the point now, given that update/upgrade is still out of the question due to the exotic SoC this phone has.
I've installed a couple interesting Magisk module, like the one that brings OnePlus fonts and gimmicks (it's called "Oxy-ify") and one called "ACC" that's supposed to better regulate battery charging, though I don't see much of a difference, to be honest.
I'm thinking about unrooting the phone, wipe out the whole drive with TWRP, and flashing the August 2018 ROM again, this time for good.
This phone will forever stay on Nougat anyway, so why bother flashing ROMs until we're blue in the face?

J2 core SM-j260g help

How to root the j2 core sm-j260g machine for help

pc12854 said:
How to root the j2 core sm-j260g machine for help
Click to expand...
Click to collapse
Quick brief. Your device doesn't have TWRP, so lets go a tedious way. So please bear with me.
I'll make use of Patch Boot Image method provided within Magisk. This process might* require factory reset, so backup your data.
(*): For best result, please do.
of course this trips Knox
0. Preparation.
You need:
> Your Phone ofcourse. Plus USB cable. Unlock phone's Bootloader first:
+ Go to Settings > About Phone > Software Info > Build Number. Press that a few times until "You are now a developer" Toast appears
+ Head back to Settings, scroll down. Developers Settings should be available.
+ OEM unlock should be available to toggle. Toggle it on. Bootloader should* be unlocked.
(*) Confirmed working.
> A Windows PC, Odin and Samsung Driver installed as per instruction: https://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin (at How to use Odin to flash firmware update, Part 1 and 2)
Click to expand...
Click to collapse
1. Extract boot image.
<!> Assuming you haven't make any changes to boot (which should be without root and twrp)
> Check your firmware: should be in Settings > About Phone > Software Info > Build Number. It will be in form of <codename of Android version> . J260G <...> . Take note of the latter. Thats your firmware.
> Get to a known site for distributing Samsung firmware (SamFirm or Updato). Search and download one for your device that have the EXACT name as the firmware you noted above and for your country.
> Extract your downloaded file, then the AP_ file.
>+ There will be a file named boot.img.lz4, extract it again (tks @dolphindrive for info)
>> Boot.img should be available for you.
Click to expand...
Click to collapse
2. Download Magisk, Patch Boot image.
> Get latest Magisk zip and Magisk Manager apk (for general users, here is the link: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 )
> Connect your phone to PC, allow MTP.
> Send the boot.img, Magisk zip and Magisk Manager apk to your phone.
> On your phone, navigate using My Files to the apk. Install Magisk Manager using the apk file.
> Open Magisk Manager
> Go to settings > patched boot output format > .img.tar (we will flash with Odin)
> Then Install Root > Patch Boot Image. Supply your boot image then follow the instructions.
>> Patched Boot image ( .img.tar ) will be available
Click to expand...
Click to collapse
3. Flash Root-patched boot
> Copy the patched file to your PC
[> At this point, I recommend factory reset your phone for best result, though I guess this is not needed]
> Reboot your phone in Download Mode (Power off, then Power + Volume Down button)
> Open Odin on your PC. Click AP, then select patched boot image file.
> Flash it
>> You should have root by now. Check Magisk Manager.
Click to expand...
Click to collapse
Pretty long eh.. Just feel bored doing Lineage testing for my J2 Prime
P/S: J5 Prime has the exact same chipset. Maybe ask 'em for TWRP port. Much easier that way!

Prove N. said:
Quick brief. Your device doesn't have TWRP, so lets go a tedious way. So please bear with me.
I'll make use of Patch Boot Image method provided within Magisk. This process might* require factory reset, so backup your data.
(*): For best result, please do.
of course this trips Knox
Pretty long eh.. Just feel bored doing Lineage testing for my J2 Prime
P/S: J5 Prime has the exact same chipset. Maybe ask 'em for TWRP port. Much easier that way!
Click to expand...
Click to collapse
Do not report errors

pc12854 said:
Do not report errors
Click to expand...
Click to collapse
Please use proper English, thankyou
Does that means Root is success?
E: I really doubt that since Samsung include a RMM lock on 2018+ devices

Prove N. said:
Please use proper English, thankyou
Does that means Root is success?
E: I really doubt that since Samsung include a RMM lock on 2018+ devices
Click to expand...
Click to collapse
Hello! I tried using the method you explained to root my device (also a J260M), did everything as you said, but I get this error when trying to patch boot image, can you help me? Thank you!
- Copying image to cache
- Device platform: armeabi-v7a
- Downloading zip
. . . 100%
- Unpacking boot image
- Checking ramdisk status
- Stock boot image detected
- Backing up stock boot image
- Patching ramdisk
- Repacking boot image
! Unable to repack boot image!
! Installation failed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Dolphin_drive said:
Hello! I tried using the method you explained to root my device (also a J260M), did everything as you said, but I get this error when trying to patch boot image, can you help me? Thank you!
- Copying image to cache
- Device platform: armeabi-v7a
- Downloading zip
. . . 100%
- Unpacking boot image
- Checking ramdisk status
- Stock boot image detected
- Backing up stock boot image
- Patching ramdisk
- Repacking boot image
! Unable to repack boot image!
! Installation failed
Click to expand...
Click to collapse
Too generic im afraid. Could you send me your boot.img file?
I'll do a blind test for j260g later (my network is so bad lol).

Prove N. said:
Too generic im afraid. Could you send me your boot.img file?
I'll do a blind test for j260g later (my network is so bad lol).
Click to expand...
Click to collapse
Yes! The PDA is J260MUBS2ARJ8 so I downloaded the firmware and extracted the boot.img
I don't know or I think I can't upload files yet (or post external links), I've sent you a DM with the link
Thank you!

dolphindrive said:
Yes! The PDA is J260MUBS2ARJ8 so I downloaded the firmware and extracted the boot.img
I don't know or I think I can't upload files yet (or post external links), I've sent you a DM with the link
Thank you!
Click to expand...
Click to collapse
Interesting.
So you sent me boot.img.LZ4 (which is a compressed file). I guess this is default for Oreo+ Samsung firmware.
Anyway, try extracting it to boot.img then try again in Magisk Manager?

Prove N. said:
Interesting.
So you sent me boot.img.LZ4 (which is a compressed file). I guess this is default for Oreo+ Samsung firmware.
Anyway, try extracting it to boot.img then try again in Magisk Manager?
Click to expand...
Click to collapse
Can you download boot j260g to help me make a file boot twrp j2 core j260g in the file of the line j260g
https://drive.google.com/open?id=1vMyDivWC_MnMxQ6LI0dddK2WWjCe8RPH

Prove N. said:
Interesting.
So you sent me boot.img.LZ4 (which is a compressed file). I guess this is default for Oreo+ Samsung firmware.
Anyway, try extracting it to boot.img then try again in Magisk Manager?
Click to expand...
Click to collapse
Awesome! It did work, I actually never paid attention to that .lz4 extension (didn't knew it was a compressed file, I even tried deleting that part so I would get the .img directly lol ) But it worked, already flashed the patched boot img and the phone is rooted
You're the best! Thanks for the help!
pc12854 said:
Can you download boot j260g to help me make a file boot twrp j2 core j260g in the file of the line j260g
Click to expand...
Click to collapse
So in your case the boot image to patch would be this one (decompressed): mediafire . com/file/rh96fd9931ikxkf/boot.img/file

dolphindrive said:
Awesome! It did work, I actually never paid attention to that .lz4 extension (didn't knew it was a compressed file, I even tried deleting that part so I would get the .img directly lol ) But it worked, already flashed the patched boot img and the phone is rooted
You're the best! Thanks for the help!
So in your case the boot image to patch would be this one (decompressed): mediafire . com/file/rh96fd9931ikxkf/boot.img/file
Click to expand...
Click to collapse
Im glad it works in your favor! So in the process did you (have to) factory reset?

dolphindrive said:
Awesome! It did work, I actually never paid attention to that .lz4 extension (didn't knew it was a compressed file, I even tried deleting that part so I would get the .img directly lol ) But it worked, already flashed the patched boot img and the phone is rooted
You're the best! Thanks for the help!
So in your case the boot image to patch would be this one (decompressed): mediafire . com/file/rh96fd9931ikxkf/boot.img/file
Click to expand...
Click to collapse
You can send me the file you can root

https://www.mediafire.com/file/rh96fd9931ikxkf/boot.img/file

https://drive.google.com/file/d/1HmM-2UpKMA7gly_PyduVqm1Kl8cO4EkL/view?usp=sharing
https://drive.google.com/file/d/1GzSv6Tbd28GU3f4eHE4aQ-4mgu3L8hkX/view?usp=sharing
boot flash odin

I did it twrp J260g what to do

pc12854 said:
I did it twrp J260g what to do
Click to expand...
Click to collapse
ENG: Sorry but I can't barely understand what you meant. Maybe try DM me to see if i can help?
P/S: I'm Vietnamese too. You may use that for chatting
VIE: xin lỗi k hiểu bên kia nói gì. Nhắn tin tui xem có giúp được k nhé

Prove N. said:
Im glad it works in your favor! So in the process did you (have to) factory reset?
Click to expand...
Click to collapse
I didn't (even though I didn't have any data on it), and it booted fine, surprising due that it's on 8.1.0, all the Oreo devices I rooted with twrp gave me that encryption error if I didn't wipe data before

Prove N. said:
ENG: Sorry but I can't barely understand what you meant. Maybe try DM me to see if i can help?
P/S: I'm Vietnamese too. You may use that for chatting
VIE: xin lỗi k hiểu bên kia nói gì. Nhắn tin tui xem có giúp được k nhé
Click to expand...
Click to collapse
Bạn có thễ làm twrp cho dòng j2 core j260g
twrp supersu vấn đề root xong chạy quá lag máy cần boot chuẩn đễ khởi động trơn chu

dolphindrive said:
I didn't (even though I didn't have any data on it), and it booted fine, surprising due that it's on 8.1.0, all the Oreo devices I rooted with twrp gave me that encryption error if I didn't wipe data before
Click to expand...
Click to collapse
I have rooted the magisk but the messaging part does not work because I don't understand why

pc12854 said:
Bạn có thễ làm twrp cho dòng j2 core j260g
twrp supersu vấn đề root xong chạy quá lag máy cần boot chuẩn đễ khởi động trơn chu
Click to expand...
Click to collapse
pc12854 said:
I have rooted the magisk but the messaging part does not work because I don't understand why
Click to expand...
Click to collapse
ENG: don't root with SuperSU, it is outdated by now. Also I don't have the device, so cannot test TWRP. (Still doing my work on J2 Prime Lineage ). If followed correctly nothing should have broken (aside Knox and its stuffs of course)
VIE: Đừng root bẳng SuperSU, cổ đại quá rồi =)) với lại bên này k có máy mà test TWRP. Test Lineage cho máy tui J2 Prime mệt sấp mặt rồi.
Cái phần tin nhắn hỏng thì chắc làm gì sai rồi, sửa lại xem (tất nhiên trừ mấy thứ liên quan tới Knox, mà đã root thì biết sao rồi =)) )

[Mod] (Root) Convert Redmi K20 Pro to Mi 9T Pro / Converter patch (Miui 11)

I found this third on Xiaomi.eu and i want to share it.. All credits for #Codered
The file for Redmi K20 Pro users who do want to change device information.
Installation:
After installing Xiaomi.eu rom or any custom Miui rom and configuring the device, reboot with twrp recovery and flash the zip file.
Full Mod Specifications:
-Redmi logo was replaced with "Mi" logo.
-Redmi boot animation has been replaced with "Mi" boot animation.
-Device model has been replaced as "Mi 9T Pro".
-Media volume steps is set to stock.
Mod Download Link : https://yadi.sk/d/iiyD9g6LrAmO6w
Change the Camera Watermark:
- Copy downloaded mod camera file to /system/priv-app/MiuiCamera/MiuiCamera.apk.
- You should set permissions 0644.
- Clear cache&data camera apk, Settings/Apps/Manage Apps/Camera -> Clear data -> Clear all data
Or
- Download flashable zip file and camera mod apk file.
- Copy to "MiuiCamera.apk" -> "/system/priv-app/MiuiCamera/" folder in the zip file.
- Flash zip file with twrp recovery.
- Clear cache&data camera app. "Settings/Apps/Manage Apps/Camera -> Clear data -> Clear all data"
Moded Camera Download Link: https://yadi.sk/d/X73NP4YvWKW3GA

Thanks. Help
I encountered an error while copy the file camera.apk at root explore: Coppy failed " Miuicamera.apk to /system/pri-app/Miuicamera"
Hepl me

caoky1234 said:
I encountered an error while copy the file camera.apk at root explore: Coppy failed " Miuicamera.apk to /system/pri-app/Miuicamera"
Hepl me
Click to expand...
Click to collapse
you have to use root explorer.
- Copy downloaded mod camera file to /system/priv-app/MiuiCamera/MiuiCamera.apk.
- You should set permissions 0644.
- Clear cache&data camera apk, Settings/Apps/Manage Apps/Camera -> Clear data -> Clear all data
Or
- Re-download flashable zip file and camera mod apk file.
- Copy to MiuiCamera.apk -> /system/priv-app/MiuiCamera/ folder in the zip file.
- Flash zip file with twrp recovery.
- Clear cache&data camera app. "Settings/Apps/Manage Apps/Camera -> Clear data -> Clear all data"

If i use mi-globe.com_v11_raphael can change to?

MelvinGt5 said:
If i use mi-globe.com_v11_raphael can change to?
Click to expand...
Click to collapse
No you don't need to
Just for k20 pro

How can i go back to old?

MelvinGt5 said:
If i use mi-globe.com_v11_raphael can change to?
Click to expand...
Click to collapse
yes, you can do this. I am using Mi-Globe 11.0.5, device is K20pro China version,after flashing this zip, everything alright!

keshow said:
I found this third on Xiaomi.eu and i want to share it.. All credits for #Codered
The file for Redmi K20 Pro users who do want to change device information.
Installation:
After installing Xiaomi.eu rom or any custom Miui rom and configuring the device, reboot with twrp recovery and flash the zip file.
Full Mod Specifications:
-Redmi logo was replaced with "Mi" logo.
-Redmi boot animation has been replaced with "Mi" boot animation.
-Device model has been replaced as "Mi 9T Pro".
-Media volume steps is set to stock.
Mod Download Link : https://yadi.sk/d/iiyD9g6LrAmO6w
Change the Camera Watermark:
- Copy downloaded mod camera file to /system/priv-app/MiuiCamera/MiuiCamera.apk.
- You should set permissions 0644.
- Clear cache&data camera apk, Settings/Apps/Manage Apps/Camera -> Clear data -> Clear all data
Or
- Download flashable zip file and camera mod apk file.
- Copy to "MiuiCamera.apk" -> "/system/priv-app/MiuiCamera/" folder in the zip file.
- Flash zip file with twrp recovery.
- Clear cache&data camera app. "Settings/Apps/Manage Apps/Camera -> Clear data -> Clear all data"
Moded Camera Download Link: https://yadi.sk/d/X73NP4YvWKW3GA
Click to expand...
Click to collapse
Working great ?

Thank U Man Works Like Charm

keshow said:
I found this third on Xiaomi.eu and i want to share it.. All credits for #Codered
The file for Redmi K20 Pro users who do want to change device information.
Installation:
After installing Xiaomi.eu rom or any custom Miui rom and configuring the device, reboot with twrp recovery and flash the zip file.
Full Mod Specifications:
-Redmi logo was replaced with "Mi" logo.
-Redmi boot animation has been replaced with "Mi" boot animation.
-Device model has been replaced as "Mi 9T Pro".
-.
Mod Download Link : https://yadi.sk/d/iiyD9g6LrAmO6w
Change the Camera Watermark:
- Copy downloaded mod camera file to /system/priv-app/MiuiCamera/MiuiCamera.apk.
- You should set permissions 0644.
- Clear cache&data camera apk, Settings/Apps/Manage Apps/Camera -> Clear data -> Clear all data
Or
- Download flashable zip file and camera mod apk file.
- Copy to "MiuiCamera.apk" -> "/system/priv-app/MiuiCamera/" folder in the zip file.
- Flash zip file with twrp recovery.
- Clear cache&data camera app. "Settings/Apps/Manage Apps/Camera -> Clear data -> Clear all data"
Moded Camera Download Link: https://yadi.sk/d/X73NP4YvWKW3GA
Click to expand...
Click to collapse
Works like a charm in my Mi 9T Pro with Xiaomi.eu!
Question. Whats is "Media volume steps is set to stock"?
Thanks again
Enviado desde mi Mi 9T Pro mediante Tapatalk

andreskafe said:
Works like a charm in my Mi 9T Pro with Xiaomi.eu!
Question. Whats is "Media volume steps is set to stock"?
Thanks again
Enviado desde mi Mi 9T Pro mediante Tapatalk
Click to expand...
Click to collapse
I have mi 9t pro EEA, with xiaomi.eu rom, failed to copy mod camera to system folder with rootexplorer

Zinouchao said:
I have mi 9t pro EEA, with xiaomi.eu rom, failed to copy mod camera to system folder with rootexplorer
Click to expand...
Click to collapse
I have mi 9t pro EEA, with xiaomi.eu rom, failed to copy mod camera to system folder with rootexplorer

andreskafe said:
Works like a charm in my Mi 9T Pro with Xiaomi.eu!
Question. Whats is "Media volume steps is set to stock"?
Thanks again
Enviado desde mi Mi 9T Pro mediante Tapatalk
Click to expand...
Click to collapse
"Media volume steps is set to stock" -> Change the number of steps from min to max to 15 instead of 30, in xiaomi.eu ROM.

Micdu70 said:
"Media volume steps is set to stock" -> Change the number of steps from min to max to 15 instead of 30, in xiaomi.eu ROM.
Click to expand...
Click to collapse
Is there any way to get 30 or more media volume steps in k20pro with miui11 India rom?

Excellent mod. Works fine and for make more complete can correct this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi Mi 9T Pro mediante Tapatalk

Will this be compatible with every version of xiaomi.eu?

Pls, can't someone create a magisk module out of this?

This file was removed please which have it should send it to my email

[ROM] BeyondROM v1.1 [21/04/2023] [HWC7] [Feb Patch] [A515F]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BeyondRom v1.1
Based on Android 13 A515FXXU6HWC7 firmware
Supported Devices: A515F only​
ROM Features
<*>Supported devices: A515F only</*>
<*>Base OneUI 5.1 Android 13 A515FXXU6HWC7 Feb 2023 patch level</*>
<*>Stock Samsung kernel</*>
<*>CSC features: call recording, camera shutter sound menu, real time network speed in statusbar, etc)</*>
<*>Knox partially removed and ROM light debloated</*>
<*>Screenshots in secure apps allowed</*>
<*>Removed automatic encryption, vaultkeeper service</*>
<*>Few build.prop tweaks</*>
<*>Warning boot screen removed, custom boot animation</*>
<*>Automatic EFS backup</*>
<*>For Safetynet use kdrag0n patch v2.4.x-mod1.x</*>
Not working
<*>Some knox related apps: Samsung Pay, Samsung AutoFill</*>
Changelog v1.1
<*>Updated to the latest HWC7 FW
Fixes
<*> </*>
Credits
- John Wu for Magisk
- Mr. Waehere for CRB kitchen
- Yillie for A13 TWRP
- dutchman89 for the new boot animation
- Alan Thomas for sammy disarm script
Download Links
A515F BR11 HWC7 Link
A515F TWRP + patched vbmeta link
Installation procedure
IS MANDATORY TO BE ON ANDROID 13 FW BEFORE FLASHING BR 11 !!!
0) Backup ALL your important files to PC, ext drives, etc
1) Download and copy the latest BR ROM zip into your external storage or USB stick if you're on stock fw encrypted
2) Download HWC7 stock FW for your phone model using Frija or Samfw and unpack it on your PC
3) Boot in download mode (Vol Up + Vol Down + plug the USB cable connected already to PC) and load up Odin on PC
Don't use USB adapters otherwise you might get issues flashing FW in Odin
Turn off Auto Reboot in Odin
4) Select files BL, AP, CP & HOME_CSC (keep data)
**do not start flash yet
5) Download the attached twrp_vbmeta_a13.tar file
6) Add the above twrp + vbmeta patched.tar file into the USERDATA slot in Odin
7) Uncheck the auto reboot option in Odin and start the flashing
8) When flashing completes (keep usb plugged in !!!), hold Vol Down + Power buttons and then as soon as the screen goes black hold Vol Up + Power buttons to boot to recovery
*be warned first time you boot into recovery it will initialize and then reboot so just keep the buttons Vol Up + Power buttons pressed longer
**if you boot in stock FW, your data will be encrypted and you'll need to wipe your data before flashing BR 3.x
9) When you boot in TWRP, wipe your data if you're encrypted, flash BR 1.x zip, save aroma log and then reboot to system
10) After the first boot, install Magisk Manager if necessary; when you'll start Magisk Manager for the first time, reply with YES (agree to reboot) after MM have setup the root environment
*after reboot, go to Magisk Manager settings and toggle On Zygisk
10) Enjoy....
1. Backup to PC all your important files: documents, pictures, contacts, SMS, etc. BEFORE starting to flash anything
2. If you have issues booting the ROM, try the clean flash
3. To boot into TWRP you need to use a USB cable connected to PC (same for DL mode) or a USB stick
4. If you like my work, consider buying me a coffee (PayPal link)
Happy flashing good people !

reserved

thanks dev any screenshots

the rom is stock like ... no themes

starbucks2010 said:
View attachment 5847645
BeyondRom v1.0
Based on Android 13 A515FXXU5GWA2 firmware
Supported Devices: A515F only​
ROM Features
<*>Supported devices: A515F only</*>
<*>Base OneUI 5.0 Android 13 A515FXXU5GWA2 Dec 2022 patch level</*>
<*>Stock Samsung kernel</*>
<*>CSC features: call recording, camera shutter sound menu, real time network speed in statusbar, etc)</*>
<*>Knox partially removed and ROM light debloated</*>
<*>Screenshots in secure apps allowed</*>
<*>Removed automatic encryption, vaultkeeper service</*>
<*>Few build.prop tweaks</*>
<*>Warning boot screen removed, custom boot animation</*>
<*>Automatic EFS backup</*>
<*>For Safetynet use kdrag0n patch v2.4.x-mod1.x</*>
Not working
<*>Some knox related apps: Samsung Pay, Samsung AutoFill</*>
Changelog v1.0
<*>Initial release
Fixes
<*> </*>
Credits
- John Wu for Magisk
- Mr. Waehere for CRB kitchen
- Yillie for A13 TWRP
- dutchman89 for the new boot animation
- Alan Thomas for sammy disarm script
Download Links
A515F BR10 HWA2 Link
Installation procedure
IS MANDATORY TO BE ON ANDROID 13 FW BEFORE FLASHING BR 10 !!!
0) Backup ALL your important files to PC, ext drives, etc
1) Download and copy the latest BR ROM zip into your external storage or USB stick if you're on stock fw encrypted
2) Download GWA2 stock FW for your phone model using Frija or Samfw and unpack it on your PC
3) Boot in download mode (Vol Up + Vol Down + plug the USB cable connected already to PC) and load up Odin on PC
Don't use USB adapters otherwise you might get issues flashing FW in Odin
Turn off Auto Reboot in Odin
4) Select files BL, AP, CP & HOME_CSC (keep data)
**do not start flash yet
5) Download the attached twrp_vbmeta_a13.tar file
6) Add the above twrp + vbmeta patched.tar file into the USERDATA slot in Odin
7) Uncheck the auto reboot option in Odin and start the flashing
8) When flashing completes (keep usb plugged in !!!), hold Vol Down + Power buttons and then as soon as the screen goes black hold Vol Up + Power buttons to boot to recovery
*be warned first time you boot into recovery it will initialize and then reboot so just keep the buttons Vol Up + Power buttons pressed longer
**if you boot in stock FW, your data will be encrypted and you'll need to wipe your data before flashing BR 3.x
9) When you boot in TWRP, wipe your data if you're encrypted, flash BR 1.x zip, save aroma log and then reboot to system
10) After the first boot, install Magisk Manager if necessary; when you'll start Magisk Manager for the first time, reply with YES (agree to reboot) after MM have setup the root environment
*after reboot, go to Magisk Manager settings and toggle On Zygisk
10) Enjoy....
1. Backup to PC all your important files: documents, pictures, contacts, SMS, etc. BEFORE starting to flash anything
2. If you have issues booting the ROM, try the clean flash
3. To boot into TWRP you need to use a USB cable connected to PC (same for DL mode) or a USB stick
4. If you like my work, consider buying me a coffee (PayPal link)
Happy flashing good people !
Click to expand...
Click to collapse
Where is twrp_vbmeta_a13.tar file ?

klavyeci said:
Where is twrp_vbmeta_a13.tar file ?
Click to expand...
Click to collapse
I attached the link to the file in the 1st post

starbucks2010 said:
View attachment 5847645​2) Download GWA2 stock FW for your phone model using Frija or Samfw and unpack it on your PC
Click to expand...
Click to collapse
Is the Product code of this software Australia XSA or CAU ?

Is CAU

this rom worked with Magisk 24.3 but got boot loop when using Magisk 25+. Sometime it auto turn on air plane mode then freeze.

do not use magisk after version 25206. I use 25206 and all is ok

you can add a mod for sound from two speakers. Dual speakers mod.

give me rom download link

shan134 said:
give me rom download link
Click to expand...
Click to collapse
why? don't you know to read?
maybe learning to ask in a nicer way would help you in the future

BR11 has been updated to the latest HWC7 FW Feb 2023 level.
Happy flashing good people !

Fantastic work.
Feb patch HWC7 .there is a problem with banking apps detecting root .
SafetyNet passed and apps is on denylist
Any idea where is the problem ?

starbucks2010 said:
Is CAU
Click to expand...
Click to collapse
New version used csc CAU?

SirMomen said:
Fantastic work.
Feb patch HWC7 .there is a problem with banking apps detecting root .
SafetyNet passed and apps is on denylist
Any idea where is the problem ?
Click to expand...
Click to collapse
Metoo, I wan't unroot

I am in Canada and I noticed my phone is on OWO (TPA), which is Panama. Never noticed that before. Anyways, what HWC7 rom can I use for this?

Koolboyvn said:
New version used csc CAU?
Click to expand...
Click to collapse
Hix, is XEO

vovanshtein said:
you can add a mod for sound from two speakers. Dual speakers mod.
Click to expand...
Click to collapse
Can you link the mod for the stereo sound? Sound quality really sucks compared to phones like the a53 with stereo capabilities.

Question All things related with GT2 Master Explorer edition (RMX3551)

I'm coming to talk about Realme GT2 Master Explorer edition (RMX3551).
It's been already 6 months using this device, the best device I ever had, but still struggling with China stuff, can't use WearOS devices, can't make backups in Google Drive, etc...
Up to now the only thing I know is to unlock the bootloader, so here we go:
First of all, ensure you are in Android 12, if not, you should downgrade version using OTA:
GT Master Exploration Edition : https://pan.baidu.com/share/init?surl=qXtbSfyifGm-LiJ7nEIX8w (code: dfng)
Once you are on Android 12, you can continue with the guide:
1. Support unlocked models
Realme GT2 Master Exploration Edition (RMX3551)
2. Matters needing attention
[BL unlocking must meet the following conditions]
It must be the True Self GT2 Master Explorer Edition purchased through official channels in mainland China
【BL Unlocking Instructions】(Important!!!)
1. After unlocking, it may have an unpredictable impact on the phone;
2. The third-party firmware may cause some functions of the mobile phone to fail to operate normally, for example, the camera function is unavailable, and may cause damage to the device;
3. It may cause leakage of private personal information on the mobile phone;
4. After unlocking, it will affect the system upgrade, and the user cannot receive the subsequent update version of realme UI;
5. After unlocking, the mobile phone status is equivalent to restoring the factory settings, and all user personal data will be cleared. It is recommended to back up the data in advance;
6. After the mobile phone is rooted, if necessary, you can contact the realme service center to assist in flashing the phone. If you can flash back to the official version, it will not affect the warranty status of the phone, but you will not be able to enjoy the return and exchange service; if you cannot flash back to the official version or the resulting If the hardware of the mobile phone fails, it is not covered by the warranty and needs to be repaired according to the situation.
3. How to unlock BL?
Preparation:
1. Download the dedicated unlocking tool APK for Realme GT2 Master Explorer Edition:
Link: https://pan.baidu.com/s/1lLPGjU2pVn8To9c7bd4LGA
Extraction code: 8023
2. The battery power of the mobile phone is kept above 60%
3. Prepare a USB data cable
4. Prepare a PC / Macbook
Officially begin:
Step 1, turn on developer mode
Go to "Settings" → "About Phone" → "Version Information", click "Version Number" 7 times to open the developer mode;
Step 2, open oemlock
Go to "Settings" → "Other Settings" → "Developer Mode" and turn on OEM unlocking;
Step 3, use APK to enter fastboot mode
Connect to the network, open the APK, and apply for unlocking in the APK.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 4, click "Start Application", please read the "Disclaimer" carefully and manually tick to agree.
Step 5, click "Submit Application" and then click "Return" to return to the application interface, wait for about 15 minutes. You can check whether the application has passed the review through "Check Review Status" on the application interface.
Step 6, unlock fastboot
After passing the review, click "Start Depth Test", and the phone will restart to the START interface
(The following is the real picture of the unlocking process)
Step 7, connect to the computer, run: fastboot flashing unlock
a. Go to https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads/ to download the platform-tools tool for Windows
b. After downloading, extract it to the root directory of the c drive
c. Keyboard Win + R, enter CMD and then Enter
d. Enter cd.. and then Enter until C:\
e. Enter cd platform-tools and enter
f. Enter fastboot flashing unlock and Enter to continue step 8 of this post
Step 8, follow the prompts on the phone interface, press the volume up button to select unlock, and after a three-second countdown, the phone will enter the interface of the picture on the right.
Step 9, run the command: fastboot reboot on the computer adb, and the phone will automatically restart.
NOTE: This restart will erase all user data.
4. Lockback Tutorial
method one:
In the off state, press the volume down button and the power button at the same time to enter the BootLoader interface, connect to the computer, and enter: fastboot flashing lock
The phone will enter the lock interface, press the volume up button to select the lock bootloader, and after a three-second countdown, the phone will enter the interface of the picture on the right
Computer adb run command: fastboot reboot, the phone will automatically restart.
Method Two:
The mobile phone is turned on and connected to the computer, enter: adb reboot bootloader
The phone will enter the BootLoader interface
Enter: fastboot flashing lock
The phone will enter the lock interface, press the volume up button to select the lock bootloader, and after a three-second countdown, the phone will enter the interface of the picture on the right
Computer adb run command: fastboot reboot, the phone will automatically restart.
After completing the Bootloader lock by any of the above two methods, please download the unlock APK to complete the installation, and apply for exiting the in-depth test on the application interface.
It is stated again that the operation of BL unlocking will have the following risks! ! ! Very important and a must see!
1. After unlocking, it may have an unpredictable impact on the phone;
2. The third-party firmware may cause some functions of the mobile phone to fail to operate normally, for example, the camera function is unavailable, and may cause damage to the device;
3. It may cause leakage of private personal information on the mobile phone;
4. After unlocking, it will affect the system upgrade, and the user cannot receive the subsequent update version of realme UI;
5. After unlocking, the mobile phone status is equivalent to restoring the factory settings, and all user personal data will be cleared. It is recommended to back up the data in advance;
6. After the mobile phone is rooted, if necessary, you can contact the realme service center to assist in flashing the phone. If you can flash back to the official version, it will not affect the warranty status of the phone, but you will not be able to enjoy the return and exchange service; if you cannot flash back to the official version or the resulting If the hardware of the mobile phone fails, it is not covered by the warranty and needs to be repaired according to the situation.
THANKS FOLKS!

I really wanted a custom ROM.

thanks for contribution, I'm using Realme GT2 Master explorer edition, the Chinese version of Realme UI 4.0 rom with built-in Google services, Android 13. It's been about 3 months since Realme UI has not received any new updates.

mrducluan said:
thanks for contribution, I'm using Realme GT2 Master explorer edition, the Chinese version of Realme UI 4.0 rom with built-in Google services, Android 13. It's been about 3 months since Realme UI has not received any new updates.View attachment 5916091
Click to expand...
Click to collapse
Could you tell me where I can find this ROM? Thanks.

JaymeBA said:
Could you tell me where I can find this ROM? Thanks.
Click to expand...
Click to collapse
I sent you the link in a private message.

I wish to have a Global Rom too, but it's like Realme decided not to go forward with this....sadly.

Full OTA C15
RMX3551_13.1.0.101(CN01)
RMX3551_11.C.15_1150_202305222028

Stano36 said:
Full OTA C15
RMX3551_13.1.0.101(CN01)
RMX3551_11.C.15_1150_202305222028
Click to expand...
Click to collapse
Trae idioma en español?
Compre el realme gt 2 máster edición y no se actualiza
Mod translation:
Does it bring language in Spanish?
I bought the realme gt 2 master edition and it does not update

Franciscozx said:
Mod translation:
Does it bring language in Spanish?
Click to expand...
Click to collapse
Greetings, and welcome to XDA. As a friendly reminder, we ask all members to please post in English as stipulated by XDA Rule #4:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thank you for your cooperation, and have a pleasant day.
-Regards: Badger50

Stano36 said:
OTA completo C15
RMX3551_13.1.0.101(CN01)
RMX3551_11.C.15_1150_202305222028
Click to expand...
Click to collapse
¿Esta ROM tiene idioma español?

Franciscozx said:
¿Esta ROM tiene idioma español?
Click to expand...
Click to collapse
Rom designed for Chinese device.I don't know if it contains the Spanish language.

mrducluan said:
gracias por su contribución, estoy usando Realme GT2 Master explorer edition, la versión china de Realme UI 4.0 rom con servicios de Google incorporados, Android 13. Han pasado aproximadamente 3 meses desde que Realme UI no recibió ninguna actualización nueva.View attachment 5916091
Click to expand...
Click to collapse
¿Esta ROM tiene idioma español?

Stano36 said:
Full OTA C15
RMX3551_13.1.0.101(CN01)
RMX3551_11.C.15_1150_202305222028
Click to expand...
Click to collapse
I wanted to clarify a doubt. You said you have the ROM with integrated google services. Do all RMX3551 owners have the same ROM? Does this ROM already come with playstore and google services pre-installed? Thanks again.

JaymeBA said:
I wanted to clarify a doubt. You said you have the ROM with integrated google services. Do all RMX3551 owners have the same ROM? Does this ROM already come with playstore and google services pre-installed? Thanks
Click to expand...
Click to collapse
It's an OTA update for the Chinese version, it probably won't include Google services.

I can't download the downgrade file, could you re-upload in google drive or something ?

Sakeadoor said:
First of all, ensure you are in Android 12, if not, you should downgrade version using OTA:
GT Master Exploration Edition : https://pan.baidu.com/share/init?surl=qXtbSfyifGm-LiJ7nEIX8w (code: dfng)
Click to expand...
Click to collapse
I've downloaded the downgrade file, but it's not for GT2 RMX3551, it's for GT RMX3366

BIBUBO BCJ said:
I've downloaded the downgrade file, but it's not for GT2 RMX3551, it's for GT RMX3366
Click to expand...
Click to collapse
Rollback for RMX3551 GT2 EE
https://rbp01.realme.net/RMX3551/RMX3551_11_A_OTA_0180_all_86b356_CN.zip