I try to root my S3 with odin now the only thing i got when i turn it on it's a few second of Samsung image and after that it's vibrating and nothing more.
I try to reboot it with the volume button down or up and nothing too
PLz help it'a a S3 from Rogers(canada) SGH-I747M
To reboot in download mode you need to press all together : Volume down, home button and power. In clockwork mode you nee to press : Volume UP, Home button and power and them let go all when you see Samsung galaxy S3 logo with litte blue writing on left top corner.
lutinx said:
I try to root my S3 with odin now the only thing i got when i turn it on it's a few second of Samsung image and after that it's vibrating and nothing more.
I try to reboot it with the volume button down or up and nothing too
PLz help it'a a S3 from Rogers(canada) SGH-I747M
Click to expand...
Click to collapse
Are you booting into recovery mode correctly ? Hold home and volume up and then hold power until it flashes...then let go
hednik said:
Are you booting into recovery mode correctly ? Hold home and volume up and then hold power until it flashes...then let go
Click to expand...
Click to collapse
Yes the only thing happen i saw tje samsung logo for 2 secondes and the phone vibrate and the screen turn black
Since I'll assuming you flashed rooted firmware, you need to access recovery to wipe data/factory reset and wipe cache in order to proceed. Which root method did you use?
Recovery mode: Vol up + home + power. When your device vibrates, release only the power button
lutinx said:
Yes the only thing happen i saw tje samsung logo for 2 secondes and the phone vibrate and the screen turn black
Click to expand...
Click to collapse
And if it doesn't work you can force it into downoad mode by holding down the power. volume down and power key without the battery and then putting in a micro usb cord plugged into the computer. Then put in the battery. Thats the hard way haha
Or get into recovery and clear all cache and factory reset.
hednik said:
And if it doesn't work you can force it into downoad mode by holding down the power. volume down and power key without the battery and then putting in a micro usb cord plugged into the computer. Then put in the battery. Thats the hard way haha
Or get into recovery and clear all cache and factory reset.
Click to expand...
Click to collapse
I try to rott it with the lastest odin. It's a S3 from Rogers canada
I try all the thing u told me and still have a black screen the phone vibrate or i see the logo od samsung for 2 secondes or the battery logo and then nothing
lutinx said:
I try to rott it with the lastest odin. It's a S3 from Rogers canada
I try all the thing u told me and still have a black screen the phone vibrate or i see the logo od samsung for 2 secondes or the battery logo and then nothing
Click to expand...
Click to collapse
Which Odin did you use?
I've been using the one from this thread: http://forum.xda-developers.com/showthread.php?t=1822308 and never had issues.
Gotta make sure you download the one for Rogers.
So you successfully got it into download mode and flashed the stock rooted rom with no issues?
If so then you need to wipe data from and cache in order to eliminate the bootloop.
Again, recovery is: Vol up + home + power. When your device vibrates, release only the power button
I am having a problem with my phone. I installed CM 11 on it via TWRP 2.6.3 but for some reason the flash didn't workout well and the phone was stuck in the boot animation. The problem is now I am not able to access bootloader because of a faulty vol down button. Before it would work some time, but now have tried it several times but can't do any thing. It just recognizes the power button press and turns the phone on and it gets stuck in bootloader. How do I get in recover to solve this problem.
Any advice?
Kabir999 said:
I am having a problem with my phone. I installed CM 11 on it via TWRP 2.6.3 but for some reason the flash didn't workout well and the phone was stuck in the boot animation. The problem is now I am not able to access bootloader because of a faulty vol down button. Before it would work some time, but now have tried it several times but can't do any thing. It just recognizes the power button press and turns the phone on and it gets stuck in bootloader. How do I get in recover to solve this problem.
Any advice?
Click to expand...
Click to collapse
Press and hold back button + power. That will boot into fastboot then use volume up to navigate
try to keep volume down button
try to keep volume down button harder from the start and after the power button, i have the same prolem and it work after 1-2 tryes
VallNAr said:
try to keep volume down button harder from the start and after the power button, i have the same prolem and it work after 1-2 tryes
Click to expand...
Click to collapse
Or u could use back button + power aswell and get there first try, no point killing the button even more.
Unlocked phone's bootloader and flashed the latest TWRP, downloaded straight from their site and md5 checked.
If I try to enter TWRP from fastboot, it enters fines but the shortcut just doesn't. If you can't enter twrp from the shortcut, then your basically screwed if you brick it..
I even tried flashing twrp all over again, and still have the sample problem.
So how can I fix this?
i have the same problem, plus the fact that i had error during flashing new rom and now i can't even go back to stock, cause my PC doesn't recognize phone in download mode. Any fixes?
bumb
If u have root u can use an app called Flashify download from playstore go to recovery by using this app n The regular way to go Volume up and power button delete all select yes confirm yes u go into TWRP
Use Flashify or while you're in recovery flash again the recovery use the "Flash Image" option. And now you'll have permanent recovery
i found a solution, when your phone is off press volume down + power until lg logo appears, then release power (keep holding wolume down) and press power again. Then double yes and boom TWRP
Kolocz said:
i found a solution, when your phone is off press volume down + power until lg logo appears, then release power (keep holding wolume down) and press power again. Then double yes and boom TWRP
Click to expand...
Click to collapse
Thanks mate. This made the factory reset menu open, and after clicking yes twice it did a normal factory reset like there was no twrp there.. I flashed twrp a couple of times with no error messages, and even got into it a month ago. How did it disappear.. what the hell
Hello together,
today i want to reboot my phone because i have no signal.
Than i realyse the my phone is stuck on the Samsung Galaxy Note 10+ Logo at the begining.
I restart my phone many tymes with Volume down + power button.
Than i try to go in twrp recovery with power+power up but i cant.
I try to go i the fastboot with power+vulme down and then put the cable in the laptop but nothing helps.
I run on latest twrp and doctor ketan rom P03.
Any ideas ?
anastasiszn said:
Hello together,
today i want to reboot my phone because i have no signal.
Than i realyse the my phone is stuck on the Samsung Galaxy Note 10+ Logo at the begining.
I restart my phone many tymes with Volume down + power button.
Than i try to go in twrp recovery with power+power up but i cant.
I try to go i the fastboot with power+vulme down and then put the cable in the laptop but nothing helps.
I run on latest twrp and doctor ketan rom P03.
Any ideas ?
Click to expand...
Click to collapse
That sucks to hear man. But are you sure that's the right combination to get into the bootloader?
I'm on the tmobile version note 10+ and you have to shut the phone off and press and hold the Bixby button and the volume up button. Not sure if it's the same for other regions though.
Sent from my [device_name] using XDA-Developers Legacy app
phone plugged into pc.. press vol down and side key until screen goes off.. quickly press vol up vol down and side key until dl mode comes up, basically when screen goes off hold down all buttons until dl mode comes up..
if u end up trying to hold vol down and side key what happens is if its taking a while u end up doing a hard reset and device will seem to not be doing anything bcuz u keep resetting it. at least this is how i get to dl mode in these type situations.
lildoggs said:
I'm on the tmobile version note 10+ and you have to shut the phone off and press and hold the Bixby button and the volume up button. Not sure if it's the same for other regions though.
Click to expand...
Click to collapse
thats for recovery yes but seems he cant get into recovery.
So I tried to install TWRP and followed the steps, used ODIN v3.14, it tried to upload something but failed with an error.
Now the phone has gone into a perpetual restart cycle:
1) Reboot (by itself or Vol Down + Power)
2) Blank screen with: "Galaxy A70 - Secured by Knox - Powered by Android"
3) Screen with: "This phone's bootloader is unlocked and its software integrity... - Press power key to continue"
4) Blank screen with: "Galaxy A70 - Secured by Knox - Powered by Android"
5) Blank screen with: "SAMSUNG" for a very long time
6) eventually back to step 1
****************
Is there a way to get back this phone?
I was flashed twrp normally and nothing happened for me. Did you pressed vol up+power ASAP after flash successful ? If not, go to download mode and flash again, then press vol up+power immediately.
I never managed to flash TWRP, ODIN displayed an error when I tried.
1. Your using the wrong version of odin. You need 3.13.3
2. Sounds like your not key comboing fast enough?
3. You can not hard brick the A70. If its in a boot loop, plug into pc and Continue to hold vol up and down till it boots to download mode. Flash latest stock version then reboot.
[CLOSED] Delete
Mod edit: Thread closed as the threadowner removed the content of the opening post! Oswald Boelcke, Senior Moderator Delete
forum.xda-developers.com
Zilliman said:
I never managed to flash TWRP, ODIN displayed an error when I tried.
Click to expand...
Click to collapse
Did you boot to Android, check oem in dev options then power off and then enter download mode? Using odin 3.13.3?
Jinetty21 said:
I was flashed twrp normally and nothing happened for me. Did you pressed vol up+power ASAP after flash successful ? If not, go to download mode and flash again, then press vol up+power immediately.
Click to expand...
Click to collapse
Dont press power during the end process, its power and vol down till screen goes blank then immediately let go and press and hold just vol up.
OK, I am now in the "Downloading..." screen and the phone is waiting.
All I have on my PC is:
recovery.tar
twrp-3.6.1_9-0-a70q.img.tar
DFE.zip
I do not have the Samsung firmware or anything else.
What should I do now?
Zilliman said:
OK, I am now in the "Downloading..." screen and the phone is waiting.
All I have on my PC is:
recovery.tar
twrp-3.6.1_9-0-a70q.img.tar
DFE.zip
I do not have the Samsung firmware or anything else.
What should I do now?
Click to expand...
Click to collapse
Get the original firmware for your phone from a 3rd party website.
Zilliman said:
OK, I am now in the "Downloading..." screen and the phone is waiting.
All I have on my PC is:
recovery.tar
twrp-3.6.1_9-0-a70q.img.tar
DFE.zip
I do not have the Samsung firmware or anything else.
What should I do now?
Click to expand...
Click to collapse
Get frija from the link in my guide under tools, install it on your pc, then use it to download your latest stock firmware. Make sure you have odin 3.13.3 as well
In frija, enter the model number and the region code of the A70
In my case it would be SM-A705MN/ TTT
Do NOT flash other models, it must be for your Model. Also, dont flash csc_home in this instance, use csc. When loading the AP file, it will take a little bit to load in and you may see odin has stopped working, ignore that and it will eventually load, make sure auto reboot is unchecked everytime you use odin. The first step in my guide says to download and flash latest stock firmware. Anytime your going to do modifications to a device, make sure to have the latest stock firmware first.
Many thanks for suggestions.
I managed to download the stock firmware from https://www.sammobile.com/samsung/galaxy-a70/firmware/SM-A705FN/BTU/#SM-A705FN and have uploaded it using ODIN 3.14 The phone has now started, like new / factory reset.
I am now setting it up (Samsung firmware) just to make sure I have got my phone back.
After I will try to zap and upload another ROM.
MarvinMod said:
Dont press power during the end process, its power and vol down till screen goes blank then immediately let go and press and hold just vol up.
Click to expand...
Click to collapse
I didn't said that hold power button during flash. Press vol up+power after successful flash, that means when odin say pass then phone goes black and boots, while bootsplash is coming, immediately press and hold vol up+power to switch to recovery.
Jinetty21 said:
I didn't said that hold power button during flash. Press vol up+power after successful flash, that means when odin say pass then phone goes black and boots, while bootsplash is coming, immediately press and hold vol up+power to switch to recovery.
Click to expand...
Click to collapse
Its not up+power after successful flash.
Its down+power till screen goes blank then immediately hold vol up only. Is what im trying to tell you. It will NOT work the way you described.
Zilliman said:
Many thanks for suggestions.
I managed to download the stock firmware from https://www.sammobile.com/samsung/galaxy-a70/firmware/SM-A705FN/BTU/#SM-A705FN and have uploaded it using ODIN 3.14 The phone has now started, like new / factory reset.
I am now setting it up (Samsung firmware) just to make sure I have got my phone back.
After I will try to zap and upload another ROM.
Click to expand...
Click to collapse
Glad you got her going. Thought you said you had a GM not an FN but if its working
MarvinMod said:
Its not up+power after successful flash.
Its down+power till screen goes blank then immediately hold vol up only. Is what im trying to tell you. It will NOT work the way you described.
Click to expand...
Click to collapse
It's not necessary, i can go up to recovery with what i'm saying. What do you mean by vol down+power ? That doesn't do anything. BTW I have FN model.
Jinetty21 said:
It's not necessary, i can go up to recovery with what i'm saying. What do you mean by vol down+power ? That doesn't do anything. BTW I have FN model.
Click to expand...
Click to collapse
In download mode, Android 11, to exit, it litterly tells you on the screen to hold vol down and power to reboot. Vol up and power does nothing in this state. To get to twrp from download mode, hold vol down and power till screen goes blank and then press and hold vol up. This will boot to twrp. Other ways to boot to twrp is power off device, plug into pc, wait for it to charge, then hild vol up and power till it boots or if magisk is installed, use magisk reboot options.
Dude, your key combos and information is incorrect. You can not reboot to twrp from download mode by holding vol up and power.
Samsung changed the keymap combination to boot into recovery on 3.1, so to boot into recovery stock or whatever it is, just follow the steps:
Connect your cellphone to the USB port.
Press on Volume UP during boot.
Samsung does weird things
haky 86 said:
Samsung changed the keymap combination to boot into recovery on 3.1, so to boot into recovery stock or whatever it is, just follow the steps:
Connect your cellphone to the USB port.
Press on Volume UP during boot.
Samsung does weird things
Click to expand...
Click to collapse
Yes, that's.what i'm saying. I'm using September Update's bootloader to get rid of this weirdness lol
MarvinMod said:
Dude, your key combos and information is incorrect. You can not reboot to twrp from download mode by holding vol up and power.
Click to expand...
Click to collapse
My key combo is true, actually the wrong one is yours This is the valid way also on the latest bootloader but like haky86 said, on latest bootloader Samsung wants you to plug USB cable to do this.
So we are agreed, there is no way to get to TWRP unless you are connected to USB? For example, on my one old phone, I used to keep TWRP backups on the SD card, and I could restore anywhere, I did not need to be near the PC with a USB cable.
Zilliman said:
So we are agreed, there is no way to get to TWRP unless you are connected to USB? For example, on my one old phone, I used to keep TWRP backups on the SD card, and I could restore anywhere, I did not need to be near the PC with a USB cable.
Click to expand...
Click to collapse
there's a fix in the telegram group, I don't remember which was because I left all cringy groups.