Hello All,
I have successfully rooted my red magic 6 pro phone using the method described in the forum post:
Root achieved! Here's how to root the Red Magic 6 and Red Magic 6 Pro
I've been up 24 hours dealing with bootloops. I finally found a way to root the phone and have it boot up! :ROFLMAO: Join our Discord Channel https://discord.gg/8RHyc6Rw Youtube Video Tutorial: UPDATED VIDEO: For all those...
forum.xda-developers.com
I am faced with the issue of the fingerprint reader not working.
Tried fixing it by running the calibration procedure (https://forum.xda-developers.com/t/...er-print-after-loss-data-calibration.4132961/) with no success.
If anyone of you has an operational fingerprint reader in their red magic 6 pro and they would like to help me fix mine, please sent me the persists.img of your phone so I can flash it in my own and get the reader operational again.
There is another post that describes the procedure on how to extract the img from your phone from the forum:
Extracting stock Boot, Recovery and Persist images
Talking here about how to extract the stock Boot, Recovery and Persist images, needed in case of e.g. bootloop upon flashing Magisk or TWRP, to reflash the stock image(s). Also, boot image is needed for patching from Magisk Manager (and flashing...
forum.xda-developers.com
Any assistance will be greatly appreciated.
Ragemanster said:
Hello All,
I have successfully rooted my red magic 6 pro phone using the method described in the forum post:
Root achieved! Here's how to root the Red Magic 6 and Red Magic 6 Pro
I've been up 24 hours dealing with bootloops. I finally found a way to root the phone and have it boot up! :ROFLMAO: Join our Discord Channel https://discord.gg/8RHyc6Rw Youtube Video Tutorial: UPDATED VIDEO: For all those...
forum.xda-developers.com
I am faced with the issue of the fingerprint reader not working.
Tried fixing it by running the calibration procedure (https://forum.xda-developers.com/t/...er-print-after-loss-data-calibration.4132961/) with no success.
If anyone of you has an operational fingerprint reader in their red magic 6 pro and they would like to help me fix mine, please sent me the persists.img of your phone so I can flash it in my own and get the reader operational again.
There is another post that describes the procedure on how to extract the img from your phone from the forum:
Extracting stock Boot, Recovery and Persist images
Talking here about how to extract the stock Boot, Recovery and Persist images, needed in case of e.g. bootloop upon flashing Magisk or TWRP, to reflash the stock image(s). Also, boot image is needed for patching from Magisk Manager (and flashing...
forum.xda-developers.com
Any assistance will be greatly appreciated.
Click to expand...
Click to collapse
You need your persist.img that shipped with phone. Someone elses will NOT. You have lost FP forever.
bs3pro said:
You need your persist.img that shipped with phone. Someone elses will NOT. You have lost FP forever.
Click to expand...
Click to collapse
I've read for another phone that they were able to restore the functionality with the persist of another phone. I understand that the sensors are calibrated per device but it seems that the issue is more related to the security of the root rather than persist being actually corrupted.
Are you aware if I flash stock rom again if there is possibility for FP to work again?
why don't you extract it from the payload in the original ROM?
Andrologic said:
why don't you extract it from the original ROM?
Click to expand...
Click to collapse
If I am not mistaken, this is a per device partition and is not included in any ROM. As I understand it, persist.img contains all the sensors calibration data for the phone.
This is why I request from someone who has the same phone to extract and share so I can have a chance to save the FP functionality in my phone.
Ragemanster said:
If I am not mistaken, this is a per device partition and is not included in any ROM. As I understand it, persist.img contains all the sensors calibration data for the phone.
This is why I request from someone who has the same phone to extract and share so I can have a chance to save the FP functionality in my phone.
Click to expand...
Click to collapse
Understood. Yes, it's not a ROM file. I may switch to this device in the next day or two. Don't mind giving you a copy of mine if you haven't got it by then..
Andrologic said:
Understood. Yes, it's not a ROM file. I may switch to this device in the next day or two. Don't mind giving you a copy of mine if you haven't got it by then..
Click to expand...
Click to collapse
I would greatly appreciate it!
Thank you very much!
Andrologic said:
Understood. Yes, it's not a ROM file. I may switch to this device in the next day or two. Don't mind giving you a copy of mine if you haven't got it by then..
Click to expand...
Click to collapse
Hello bro i have same issue just for sure do u have redmagic6 pro with 5050mAh (international) version???
If yes please help me, im struggle two months with this issue and now know i lost my a file named persist.img lol
Any luck guys. I've got the same problem.
Ragemanster said:
Hello All,
I have successfully rooted my red magic 6 pro phone using the method described in the forum post:
Root achieved! Here's how to root the Red Magic 6 and Red Magic 6 Pro
I've been up 24 hours dealing with bootloops. I finally found a way to root the phone and have it boot up! :ROFLMAO: Join our Discord Channel https://discord.gg/8RHyc6Rw Youtube Video Tutorial: UPDATED VIDEO: For all those...
forum.xda-developers.com
I am faced with the issue of the fingerprint reader not working.
Tried fixing it by running the calibration procedure (https://forum.xda-developers.com/t/...er-print-after-loss-data-calibration.4132961/) with no success.
If anyone of you has an operational fingerprint reader in their red magic 6 pro and they would like to help me fix mine, please sent me the persists.img of your phone so I can flash it in my own and get the reader operational again.
There is another post that describes the procedure on how to extract the img from your phone from the forum:
Extracting stock Boot, Recovery and Persist images
Talking here about how to extract the stock Boot, Recovery and Persist images, needed in case of e.g. bootloop upon flashing Magisk or TWRP, to reflash the stock image(s). Also, boot image is needed for patching from Magisk Manager (and flashing...
forum.xda-developers.com
Any assistance will be greatly appreciated.
Click to expand...
Click to collapse
If you solve your problem please share with us.
You can directly use the persist image recovery of red Magic 5 mobile phone. The effect is the same. I have tested it
Hey guys!
I also lost the "persist" and with it almost all my sensors...Someone please share with me. I know it's not calibrated for my phone, but it can only be better :/ I've read all the RM6 forums that google puts out, but I can't find a solution :/
Thank you very much!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
This is the Pixel 2 XL's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Cant wait to try it
Toejam1998 said:
Cant wait to try it
Click to expand...
Click to collapse
Tell me if it's work for you
I'll wait for a few others as well
Finally i got a solution for Nexus and Pixel Factory Image flash, now it works perfectly
does this do the critical unlock as well?
razgriz1234 said:
does this do the critical unlock as well?
Click to expand...
Click to collapse
I have integrated "fastboot flashing unlock_critical" for pixel 2 xl only, i have not tested it but it should work
mauronofrio said:
I have integrated "fastboot flashing unlock_critical" for pixel 2 xl only, i have not tested it but it should work
Click to expand...
Click to collapse
ok cool thanks for the quick reply
razgriz1234 said:
ok cool thanks for the quick reply
Click to expand...
Click to collapse
I saw now that i forgot to unlock the flash factory image option for all 4 Pixel, i have released an update to solve that, tell me if it works
This saved my ass last night got bootloop from hell nothing would flash at all run this and boom back in business so like to say thanks for the tool :good:
jaythenut said:
This saved my ass last night got bootloop from hell nothing would flash at all run this and boom back in business so like to say thanks for the tool :good:
Click to expand...
Click to collapse
I'm happy this tool helped you:good:
Do you flash a factory image with this tool?
mauronofrio said:
I'm happy this tool helped you:good:
Do you flash a factory image with this tool?
Click to expand...
Click to collapse
Yes mate
jaythenut said:
Yes mate
Click to expand...
Click to collapse
People like to see feedback and in this thread this is the first
Does this tool work well for Pixel XL2? If I wipe phone to unencrypt, will flashing stock re-encrypt it?
almahix said:
Does this tool work well for Pixel XL2? If I wipe phone to unencrypt, will flashing stock re-encrypt it?
Click to expand...
Click to collapse
I think way early on it was established we can't have it unencrypted once the OS install it's completed, unless something changed or I got it wrong. Lol
almahix said:
Does this tool work well for Pixel XL2? If I wipe phone to unencrypt, will flashing stock re-encrypt it?
Click to expand...
Click to collapse
You can uncrypt your phone but if you.flash a stock rom, the kernel at first boot will automatically encrypt your memory again. There are 2 different encryption, one by code and one with standard image key. At this moment the twrp will automatically uncrypt the system key but you need to manually write the code (if is setted). The tool will uncrypt both method, the flash of stock rom will re-uncrypt with system key but not with code key
mauronofrio said:
You can uncrypt your phone but if you.flash a stock rom, the kernel at first boot will automatically encrypt your memory again. There are 2 different encryption, one by code and one with standard image key. At this moment the twrp will automatically uncrypt the system key but you need to manually write the code (if is setted). The tool will uncrypt both method, the flash of stock rom will re-uncrypt with system key but not with code key
Click to expand...
Click to collapse
Grazie.
Just got my Pixel 2XL the other day and am excited to root and start modding. I have been monitoring this thread just to see what issues people are running into but it looks like not many people are even doing this surprisingly. I mean that's why I bought this Google phone, so I don't have to deal with locked bootloaders that these carriers put in them to discourage rooting. I know this phone is also locked but it's not for the purpose of keeping people from rooting them. I just think that it's so odd that this thread has very little activity.
dricacho said:
I just think that it's so odd that this thread has very little activity.
Click to expand...
Click to collapse
I think it too, but i don't know why.
dricacho said:
Just got my Pixel 2XL the other day and am excited to root and start modding. I have been monitoring this thread just to see what issues people are running into but it looks like not many people are even doing this surprisingly. I mean that's why I bought this Google phone, so I don't have to deal with locked bootloaders that these carriers put in them to discourage rooting. I know this phone is also locked but it's not for the purpose of keeping people from rooting them. I just think that it's so odd that this thread has very little activity.
Click to expand...
Click to collapse
mauronofrio said:
I think it too, but i don't know why.
Click to expand...
Click to collapse
The device is very expensive, has dual partitions, has gotten a lot of bad press, and not near as Dev friendly as some others. Having said that, there are about 5 custom roms, root, exposed, substratum, and various launcher and active edge mods. So it's not like we're hurting too bad ??
Hey there!
I don't own this device anymore!
There will be no updates from me anymore.
This is how to Root the BQ Aquaris X2 / X2 PRO without a Custom Recovery like TWRP!
This is more or less a workaround until an official TWRP recovery will be available.
*** WARNING ***
This will work for the following builds:
- 1.3.0 -> 1.7.2
Requirements:
- ADB/Fastboot + Drivers
- Unlocked Bootloader
- Working Brain
How to:
Unlock Bootloader:
Unlocking Method
Our Aquaris X2 PRO is locked and needs to be unlocked before flashing anything.
STEPS:
1. Connect your phone to your PC using ADB.
2. > adb reboot bootloader
3. Your phone will now enter the fastboot mode
4. > fastboot flashing unlock
5. Your phone will be unlocked.
*** Make a backup of all your data as it might get erased during the process***
*** Warning***
After you unlock the device, it will become less secure. Your personal data might be leaked or lost.
Please think twice before flashing your phone and do it at your own risk.
Root / install Magisk:
Step 1:
Download the latest Magisk Manager from this Link:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
And install the APK File.
Step 2:
Download the patched boot image for your firmware version (See attached screenshot):
Aquaris X2 PRO
Version 1.3.0_x:
https://tt-services.de/xda/aquarisx2pro/patched_boot_1.3.0.img
Version 1.4.0_x:
https://tt-services.de/xda/aquarisx2pro/patched_boot_1.4.0.img
Version 1.5.0_x:
https://tt-services.de/xda/aquarisx2pro/patched_boot_1.5.0.img
Version 1.6.0_x:
https://tt-services.de/xda/aquarisx2pro/patched_boot_1.6.0.img
Version 1.7.0_x:
https://tt-services.de/xda/aquarisx2pro/patched_boot_1.7.0.img
Version 1.7.1_x:
https://tt-services.de/xda/aquarisx2pro/patched_boot_1.7.1.img
Version 1.7.2_x:
https://tt-services.de/xda/aquarisx2pro/patched_boot_1.7.2.img
---
Aquaris X2 Thanks to tomparr for providing the images!
Version 1.3.0_x:
https://tt-services.de/xda/aquarisx2/patched_boot_1.3.0.img
Version 1.4.0_x:
https://tt-services.de/xda/aquarisx2/patched_boot_1.4.0.img
Version 1.5.0_x:
https://tt-services.de/xda/aquarisx2/patched_boot_1.5.0.img
Version 1.5.0_x:
https://tt-services.de/xda/aquarisx2/patched_boot_1.6.0.img
Version 1.7.0_x:
https://tt-services.de/xda/aquarisx2/patched_boot_1.7.0.img
Version 1.7.1_x:
https://tt-services.de/xda/aquarisx2/patched_boot_1.7.1.img
Step 3:
Use ADB to boot into Bootloader:
> adb reboot bootloader
Now try if the patched Boot Image will work for you:
> fastboot boot <<path to boot image>>
Now the Device should boot with this Image.
Check if the device will boot as expected and take a look at the Magisk Manager APP to check if everything has succeeded.
Sometimes this will not always work as expected. If your device stuck at the Android one screen try to flash the image directly (See next step)
If so you can flash the Boot image with the folowing Steps:
> adb reboot bootloader
> fastboot flash boot <<path to boot image>>
Done! :fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
works for me too. thanks.
Works perfect, however when I try to enter into Magisk Hide the app close suddenly. Any advice?
wiran8 said:
Works perfect, however when I try to enter into Magisk Hide the app close suddenly. Any advice?
Click to expand...
Click to collapse
Sorry I havent tested MagiskHide yet.
Same problem here...
I opened a issue on GitHub.
You can view the current status here:
https://github.com/topjohnwu/Magisk/issues/619
How do you create the bootimages?
Micha_Btz said:
How do you create the bootimages?
Click to expand...
Click to collapse
Hi Micha_Btz,
there is a detailed guide how to do that in the official Magisk Thread.
You can view it in this section:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
It works withg Aquaris X2? Without the "pro"
SrWindings said:
It works withg Aquaris X2? Without the "pro"
Click to expand...
Click to collapse
Hi SrWindings,
I've updated the thread and add a boot image for the X2.
Can you can give me feedback if everything works?
I do not own an X2...
TurboToni said:
Hi SrWindings,
I've updated the thread and add a boot image for the X2.
Can you can give me feedback if everything works?
I do not own an X2...
Click to expand...
Click to collapse
I will test it today or tomorrow (CEST Time Zone), and I will give you the feedback. Thank you. I hope it works
TurboToni said:
Hi SrWindings,
I've updated the thread and add a boot image for the X2.
Can you can give me feedback if everything works?
I do not own an X2...
Click to expand...
Click to collapse
Well I tested it now with the "fatboot boot [image path]" and it doesen't work. It gets stuck in the android one logo.
Could you fix it or do you need more information?
SrWindings said:
Well I tested it now with the "fatboot boot [image path]" and it doesen't work. It gets stuck in the android one logo.
Could you fix it or do you need more information?
Click to expand...
Click to collapse
Which rom version are you using? Can you tell me the exact build number?
TurboToni said:
Which rom version are you using? Can you tell me the exact build number?
Click to expand...
Click to collapse
Im using the stock rom (the one coming with the device)
Version: 1.4.0_20180830-1036
Android: 8.1.0
https://imgur.com/a/Xkezv7y
SrWindings said:
Im using the stock rom (the one coming with the device)
Version: 1.4.0_20180830-1036
Android: 8.1.0
https://imgur.com/a/Xkezv7y
Click to expand...
Click to collapse
Sorry, it looks like i am not able to create the image without the hardware
TurboToni said:
Sorry, it looks like i am not able to create the image without the hardware
Click to expand...
Click to collapse
Can you at least tell me how to do it? Please?
SrWindings said:
Can you at least tell me how to do it? Please?
Click to expand...
Click to collapse
There is a detailed guide how to do that in the official Magisk Thread.
You can view it in this section:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
TurboToni said:
There is a detailed guide how to do that in the official Magisk Thread.
You can view it in this section:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
Thank you, but how can I get my boot image? I searched the entire internet for a method for dumping/backuping my boot image without a custom recovery or root and I don't find any. Help me please!
SrWindings said:
Thank you, but how can I get my boot image? I searched the entire internet for a method for dumping/backuping my boot image without a custom recovery or root and I don't find any. Help me please!
Click to expand...
Click to collapse
You can use the official firmware located here:
https://www.bq.com/de/support/aquaris-x2/support-sheet
Download the 1.4 firmware zip file and extract the boot image manually from there.
hello
i heard of trouble with the X2 (pro)'s camera after rooting in one way or another. anybody here who knows something about that?
qiezer said:
hello
i heard of trouble with the X2 (pro)'s camera after rooting in one way or another. anybody here who knows something about that?
Click to expand...
Click to collapse
Hey there,
I don't have any problems/bugs since rooting the phone.
Can you tell me where those camera problems are mentioned?
TurboToni said:
Hey there,
I don't have any problems/bugs since rooting the phone.
Can you tell me where those camera problems are mentioned?
Click to expand...
Click to collapse
hello TurboToni
thx for your answer. my collegue couldn't tell, where he might have read it. it may have had to do with autofocus but not sure
greetz
Billion Capture Plus
Flipkart phone with SD625
There's also a global version now for only 65€ that can be found via Chinese resellers which is a bargain.
According to 4pda the Bootloader seems unlocked since a user was alble to flash mido TWRP with no working touchscreen unfortunately.
The phone has been updated to Oreo with Camera2api enabled which makes Gcam ports work well
Unfortunately there no official downloadable firmware, unbrick guides or custom ROMs, which is surprising considering the great custom ROM community India has
Gcam with everything working except Slowmo:
*Works only on Android 7.1.2
https://f.celsoazevedo.com/file/gcamera/NoHex_MGC_6.1.021_xcam_5_beta20.apk
According to a user at 4pda forums mido TWRP can be flashed but there's no working touchscreen.
Since there's no way to find the Oreo update zip file we can't get the display driver yet
Be careful - unlocking the boot on this device leads to impossibility of OTA update to 8.1. (status 7 in recovery). Fought with this phone for almost a month, and no lucky chance to catch the update in "mid-air"(while it's being downloaded) or make the updater's apk to download the firmware in other place instead of data (owner: root). Still going for a vicious circle: we don't have root to pull the OTA update out of the phone to make a custom recovery... And we don't have TWRP to root it.
We didn't exactly flash mido TWRP, just booted it. Hardware buttons are working though, but again we don't have CWM.
Dance4Life said:
Be careful - unlocking the boot on this device leads to impossibility of OTA update to 8.1. (status 7 in recovery). Fought with this phone for almost a month, and no lucky chance to catch the update in "mid-air"(while it's being downloaded) or make the updater's apk to download the firmware in other place instead of data (owner: root). Still going for a vicious circle: we don't have root to pull the OTA update out of the phone to make a custom recovery... And we don't have TWRP to root it.
We didn't exactly flash mido TWRP, just booted it. Hardware buttons are working though, but again we don't have CWM.
Click to expand...
Click to collapse
I'm not Russian so I'm using Google translate to understand .
Should I upgrade to Oreo any downsides?
Can you upload the Google camera config files?
How can we make twrp work?
Isn't there any firmware dump tool for Qualcomm phones?
If we can get the stock boot.img we can have root without TWRP
Also has anyone tried flashing treble ROMs via fast boot?
Edit: Found this tutorial
What I wanna say is: Dumping the stock boot.img
Modify it with root via the Magisk app
Flash the modified boot.img in fast boot in order to have root
adaa1262 said:
I'm not Russian so I'm using Google translate to understand .
Should I upgrade to Oreo any downsides?
Can you upload the Google camera config files?
How can we make twrp work?
Isn't there any firmware dump tool for Qualcomm phones?
If we can get the stock boot.img we can have root without TWRP
Aldo has anyone tried flashing treble ROMs via fast boot?
Edit: Found this tutorial
Click to expand...
Click to collapse
Interesting tutorial, but the program in video saves files in unknown format. What do we do with them after we got dump?
1. Oreo update contains one little bug - it slightly interrupts the touchscreen's work. No noticeable in everyday usage, but still having its place. Can't attach the example 'çause I'm newbie here.
2. The only way to build up the TWRP is to get kernel source of stock rom (boot.img). The problem is that we can't pull it out of device - this partition is hidden under "root" privileges.
3. You can dump anything with ADB, but there is no way you see the most important partitions like data, system, boot, recovery and so on.
4. Nope, see second line;
5. No, because the chance to catch a brick (to get an empty device which won't load the system/recovery/adb/fastboot) is too high.
Dance4Life said:
Interesting tutorial, but the program in video saves files in unknown format. What do we do with them after we got dump?
1. Oreo update contains one little bug - it slightly interrupts the touchscreen's work. No noticeable in everyday usage, but still having its place. Can't attach the example 'çause I'm newbie here.
2. The only way to build up the TWRP is to get kernel source of stock rom (boot.img). The problem is that we can't pull it out of device - this partition is hidden under "root" privileges.
3. You can dump anything with ADB, but there is no way you see the most important partitions like data, system, boot, recovery and so on.
4. Nope, see second line;
5. No, because the chance to catch a brick (to get an empty device which won't load the system/recovery/adb/fastboot) is too high.
Click to expand...
Click to collapse
So is there another way ?
Have you discovered anything new?
Also as I said can you upload the Google camera config files?
You can upload them via a PC using the paper clip icon
Also how's the camera quality with Google camera?
adaa1262 said:
So is there another way ?
Have you discovered anything new?
Also as I said can you upload the Google camera config files?
Click to expand...
Click to collapse
So far we can't see another ways to get TWRP or root. Couple of configs (remove space in the end of links):
4pda.ru/forum/index.php?showtopic=944778&view=findpost&p=84721063
4pda.ru/forum/index.php?showtopic=944778&view=findpost&p=85797772
Google Camera works pretty fine, especially on 8.1. But the seventh droid has fancy photos too. Search for the gcam on the 4pda thread, there are some examples of Google Camera photos.
Dance4Life said:
So far we can't see another ways to get TWRP or root. Couple of configs (remove space in the end of links):
4pda.ru/forum/index.php?showtopic=944778&view=findpost&p=84721063
4pda.ru/forum/index.php?showtopic=944778&view=findpost&p=85797772
Google Camera works pretty fine, especially on 8.1. But the seventh droid has fancy photos too. Search for the gcam on the 4pda, there are some examples of Google Camera photos.
Click to expand...
Click to collapse
I don't have a 4pda account so I can't download them
adaa1262 said:
I don't have a 4pda account so I can't download them
Click to expand...
Click to collapse
And I don't have an ability to put them here çause I'm newbie
Dance4Life said:
And I don't have an ability to put them here çause I'm newbie
Click to expand...
Click to collapse
Can you mirror the files to gdrive or mega?
adaa1262 said:
Can you mirror the files to gdrive or mega?
Click to expand...
Click to collapse
Spaces should be removed from the end.
mega.nz/#!enRkXSy J
mega.nz/#!3jJgwIY B
Dance4Life said:
Spaces should be removed from the end.
mega.nz/#!enRkXSy J
mega.nz/#!3jJgwIY B
Click to expand...
Click to collapse
File no longer available
If i copy each it will say i neef a decrypt key
adaa1262 said:
File no longer available
If i copy each it will say i neef a decrypt key
Click to expand...
Click to collapse
So complicated... I have chosen the option "link without key". But here:
3hujYNerqEGcOlRaiaz5aXMM18FgiJcPGqTwVsOqkhw
VhdD7GPKLjFeTDvjcH2dW2b1knekeHkmPo6Hh11zSKM
XML Files for Gcam taken from 4pda forums
Thanks to @Dance4Life for uploading
Any Custom Recovery for Billion Capture Plus??
Is there any working Custom Recovery available for Billion Capture Plus (4GB+64GB model). I have tried some available recovery from TWRP and OrangeFox and it stuck in Boot screen where it just show "Billion logo and powered by Android". In this mode if I connect to my PC and using fastboot I can still access mobile and whatever I try to flash it is not working.
Any help in getting Custom Recovery or Original Bootloader so that I can use my mobile will be helpful for me.
itsKekC said:
Is there any working Custom Recovery available for Billion Capture Plus (4GB+64GB model). I have tried some available recovery from TWRP and OrangeFox and it stuck in Boot screen where it just show "Billion logo and powered by Android". In this mode if I connect to my PC and using fastboot I can still access mobile and whatever I try to flash it is not working.
Any help in getting Custom Recovery or Original Bootloader so that I can use my mobile will be helpful for me.
Click to expand...
Click to collapse
Dev on 4pda forums are still working on it
Anyone got enough language skills to translate some 4pda instructions into english? Ofc we got google translator, but personally I would feel more secure having those steps in english.
adaa1262 said:
XML Files for Gcam taken from 4pda forums
Thanks to @Dance4Life for uploading
Click to expand...
Click to collapse
File already gone?
Can someone please re-upload it?
UPDATE
Working Gcams for
Code:
Android 7.1.2
Install [URL="NoHex_MGC_6.1.021_xcam_5_beta20.apk"]http://https://f.celsoazevedo.com/file/gcamera/NoHex_MGC_6.1.021_xcam_5_beta20.apk[/URL]this apk
Download the NoHex_MGC_6.1.021_xcam_5_beta20. xml file from [URL="here"]http://mega.nz/#!enRkXSyJ[/URL] with this decryption key 3hujYNerqEGcOlRaiaz5aXMM18FgiJcPGqTwVsOqkhw
[I]Everything is working except slowmo[/I]
Code:
Android 8 Oreo
[URL="MGC_6.1.021_FINAL_V1a_A8.1+.apk"]http://https://androidfilehost.com/?fid=11410963190603855055[/URL]
How to apply config files to google camera
Open Google Camera and save a random config and get to /Gcam/config and paste the xml
Open Google Camera again and tap on the bottom between the shutter button like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Choose the xml and save
Moderator Information
Always be caution when you flash files. Be sure to understand how to backup and rescure yoru device in case of flash failure or something happened. It is the general rule for every flash lover.
Click to expand...
Click to collapse
Color OS 12 CBT 1
Android 12
Only for OnePlus 8 PRO
Spoiler: MSM tools for all 1+ version, please use only for your version IN...
Unbrick/Msm tools for Oneplus Smartphones – Complete Collection
Unbrick/Msm tools can restore any Oneplus smartphone to factory image/Stock OS. In the post, we will be adding all the Unbrick/Msm tools for all the Oneplus smartphones and the list will keep updating whenever Oneplus launches a new Smartphone. Join Techibee Telegram Channel Join Now WhatsApp...
techibee.in
Spoiler: Fingerprint Fix
Just installing ColorOSMagisk-v1.2 module and reboot device.
微博
随时随地发现新鲜事！微博带你欣赏世界上每一个精彩瞬间，了解每一个幕后故事。分享你想表达的，让全世界都能听到你的心声！
m.weibo.cn
Spoiler: Color OS 12
1. Backuped your persist before flashing!
OnePlus 8P how to quickly falsh into ColorOS 12
First you download the MSM Tool of Hydrogen OS
Link: https://yun.daxiaamu.c…8C%85%E6%B0%A211.0.4.4
After the flashing is complete, download Hydrogen OS 11.0.13.13
Select local upgrade, select the downloaded package, and perform OTA upgrade
Link: https://yun.daxiaamu.c…ro/%E6%B0%A211.0.13.13
Then download ColorOS 12 CBT 1
Select local upgrade, select the downloaded package, and perform OTA upgrade
OnePlus 8Pro ColorOS 12 CBT 1
link： https://otaafsc-cost.h…555_e253ead2c7ae5e.zip
Restart the phone after installing 100%
Spoiler: Root
- Unlock Bootloader
- Download and extract ColorOS-12_ROOT_8Pro.zip
- Reboot to bootloader
- Run coloroot.bat
- Done
Spoiler: Sim FIX
If You just booted into ColorOS 12 on 8 Pro and have no signal or other sim issues..
Extract the zip and run simfix.bat from fastboot
SimFix_OnePlus8Pro_ColorOS12
https://mega.nz/file/I…Lzi3cliDjvf0U1BxvlE_og
Spoiler: Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloading right now. Any screenshots?
xtcislove said:
Downloading right now. Any screenshots?
Click to expand...
Click to collapse
Added a screenshot to the first topic.
I have not installed it yet, describe pls your experience later.
zloynavseh said:
Added a screenshot to the first topic.
I have not installed it yet, describe pls your experience later.
Click to expand...
Click to collapse
First things first: Thanks for your work.
Everything is working fine but its too much beta to test it as a daily driver.
What i have to say is, i like the new ui overall BUT the OOS11 UI is so much cleaner an i prefer it over any other ui.
-On first boot the numbers to enter my sim code where to big and i couldnt reach the enter key, a reboot fixed it.
No playstore preinstalled.
-Root is working fine
-USB debugging, pc connection has some problems
-Overall it feels good
-It looks and feels clean but i prefer oos look and feel
-Fingerprint animation is awesome
Going back to OOS11 in 10 minutes, you might have some questions first?
More screenshots
xtcislove said:
More screenshots
Click to expand...
Click to collapse
Thx, can you delete part of screenshots with you phone number, ore just smear over it.
Did you check safetynet and GPAY? Is fingerprint works fine?
Oh nice!!! @zloynavseh
I just saw the sim fix. (Last time I test got no-sim error too.)
zloynavseh said:
Thx, can you delete part of screenshots with you phone number, ore just smear over it.
Did you check safetynet and GPAY? Is fingerprint works fine?
Click to expand...
Click to collapse
Yeah thanks didnt saw the number there.
Didnt checked safetynet but gpay was working fine. Fingerprint was working as good as in oos11.
xtcislove said:
First things first: Thanks for your work.
Everything is working fine but its too much beta to test it as a daily driver.
What i have to say is, i like the new ui overall BUT the OOS11 UI is so much cleaner an i prefer it over any other ui.
-On first boot the numbers to enter my sim code where to big and i couldnt reach the enter key, a reboot fixed it.
No playstore preinstalled.
-Root is working fine
-USB debugging, pc connection has some problems
-Overall it feels good
-It looks and feels clean but i prefer oos look and feel
-Fingerprint animation is awesome
Going back to OOS11 in 10 minutes, you might have some questions first?
Click to expand...
Click to collapse
i wasn't able to get root working, could you give a quick instruction?
conquistadore.11 said:
i wasn't able to get root working, could you give a quick instruction?
Click to expand...
Click to collapse
-Unlock Bootloader
-Download and extract ColorOS-12_ROOT_8Pro.zip from first post.
-Reboot to bootloader
-Run coloroot.bat
Done.
What are the chances of this build getting an OTA update since it is a closed beta one?
gsser said:
What are the chances of this build getting an OTA update since it is a closed beta one?
Click to expand...
Click to collapse
Chance more than colorOS 11. Open beta will staring Q1'22.
I'm currently on OOS 11.0.9.9 and directly flashed the CBT through local upgrade. Everything is working fine except fingerprint. All my apps are retained no issues like data loss, no chinese bloatware.
manojkumarn said:
I'm currently on OOS 11.0.9.9 and directly flashed the CBT through local upgrade. Everything is working fine except fingerprint. All my apps are retained no issues like data loss, no chinese bloatware.
Click to expand...
Click to collapse
Did you backuped your persist before flashing? If you didn't do it, I have bad news for you, you will have great difficulty in restoring it! Try to load backup.
zloynavseh said:
Did you backuped your persist before flashing? If you didn't do it, I have bad news for you, you will have great difficulty in restoring it! Try to load backup.
Click to expand...
Click to collapse
Same problem here. I have the persist.img backed up from OOS but replacing data and engineermode folders didn't seem to help
The region are Chinese,, ( on settings, or Europe ?).
conquistadore.11 said:
Same problem here. I have the persist.img backed up from OOS but replacing data and engineermode folders didn't seem to help
Click to expand...
Click to collapse
Did you unblock your Bootloader? Sometimes it's happening when you unblock it.
zloynavseh said:
Did you unblock your Bootloader? Sometimes it's happening when you unblock it.
Click to expand...
Click to collapse
yeah it's unlocked atm. should i re-lock and try again?
xtcislove said:
More screenshots
Click to expand...
Click to collapse
大侠阿木云盘 | 一加手机官方ROM下载
OLAINDEX,Another OneDrive Directory Index
yun.daxiaamu.com
conquistadore.11 said:
yeah it's unlocked atm. should i re-lock and try again?
Click to expand...
Click to collapse
1. Change to Hydrogen OS via MSM, check fingerprint, if it broken resolve via backup persist. Then update Hydrogen.
2. Flashing via MSM Color OS 12 again
Hi everyone!
I need help, that's why I registered on this forum.
I have OnePlus 7T and I upgraded to ColorOS12.1 from this video. Unfortunately, this is a beta with Chinese menus and I don't like the new firmware at all. I would like to go back to the original OOS11 stable firmware for Europe, but i don't know how to do it. I tried MSM and ADB via CMD, but can't unlock Bootloader.
I am asking you for help, because I cannot use the phone and I no longer have the strength to look for a solution to the problem myself. Thank you in advance for any help.
Sorry for my English.
Best regards
KamilFromNorth
Can I count on help, I really care about solving the above problem? Please.
Ok, the topic can be closed, I went back to stock rom OOS11 according to this tutorial. First I struggled with ADB, Fastboot, Google Android drivers and versions, and finally Qualcomm and the latter was causing problems in MSM. After updating the Qualcomm driver in Win10, MSM ran without errors and uploaded a new rom, version 10 for Europe, and then the phone update to 11.
https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.3994835/
Kind regards
KamilFromNorth
KamilFromNorth said:
Hi everyone!
I need help, that's why I registered on this forum.
I have OnePlus 7T and I upgraded to ColorOS12.1 from this video. Unfortunately, this is a beta with Chinese menus and I don't like the new firmware at all. I would like to go back to the original OOS11 stable firmware for Europe, but i don't know how to do it. I tried MSM and ADB via CMD, but can't unlock Bootloader.
I am asking you for help, because I cannot use the phone and I no longer have the strength to look for a solution to the problem myself. Thank you in advance for any help.
Sorry for my English.
Best regards
KamilFromNorth
Click to expand...
Click to collapse
I also updated it to that version, and if I was able to return it to the global ROM, the only thing is that now the gyro sensor is inverted. When I activate the automatic rotation all the applications work backwards. I've tried everything and can't get it to work. If I go back and install the ColorOS version, the automatic rotation works fine again, but unfortunately, since that version has bugs, it is not comfortable to use it for daily use. We will have to wait if it manages to solve this problem. Greetings!
KamilFromNorth said:
Ok, the topic can be closed, I went back to stock rom OOS11 according to this tutorial. First I struggled with ADB, Fastboot, Google Android drivers and versions, and finally Qualcomm and the latter was causing problems in MSM. After updating the Qualcomm driver in Win10, MSM ran without errors and uploaded a new rom, version 10 for Europe, and then the phone update to 11.
https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.3994835/
Kind regards
KamilFromNorth
Click to expand...
Click to collapse
Have you tried the auto gyro sensor, is it working fine?
True, I also have a problem with the gyroscope. I also noticed today that it does not preview a photo in the GCam, there is a black screen. I wonder, why put tutorials with beta roms, that are unstable and later create only problems that can't be fixed ?!
freeuser00 said:
Have you tried the auto gyro sensor, is it working fine?
Click to expand...
Click to collapse
How did you get back to stock global rom, what specific versions were they? Maybe we need to try to upload another rom, or clear the memory to zero and then upload a new rom ?!
I found a comment under the video OnePlus 7/7T Color OS12.1, I wonder if it will work, but I don't know what the A9 and A10 mean, which are roms ?!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit.
Ok, Android 9 was for OP7 without T, now question, should I install it for 7T ?!
KamilFromNorth said:
I found a comment under the video OnePlus 7/7T Color OS12.1, I wonder if it will work, but I don't know what the A9 and A10 mean, which are roms ?!
View attachment 5594359
Edit.
Ok, Android 9 was for OP7 without T, now question, should I install it for 7T ?!
Click to expand...
Click to collapse
No, just use earliest oos10 msmtool for global
Thanks, I thought so too, but preferred to ask.There will be time, so I will get to work and let you know if it has helped. The worst thing is that I have already removed MSM, ADB, Fastboot and drivers.
...
You can flash persist.img only if you have your own backup of persist.img. Dont even think to flash someones persist. It's will break your fingerprint
@marsian4uk Thanks for the info, do you have any idea, how to fix auto rotation?
KamilFromNorth said:
@marsian4uk Thanks for the info, do you have any idea, how to fix auto rotation?
Click to expand...
Click to collapse
I know one way but you can lose widevine level. And there is a chance to broke fingerprint. At least, one guy broke his fingerprint when he use this method
Anyway I advice you to make backup of your persist.img (even if it broken, because in future you can fix this)
Found this instruction few days before.
In my case everything is good (except widevine level). So, let's start:
I extracted my persist partition, hex edited the lsm6dsm_0_platform.orient back to what was on OOS 11 and flashed it back. Orientation, sensors and fingerprint working fine.
Caution to whoever tries to replicate, you might hard brick your phone if you do something wrong.
Here are the correct values:
@marsian4uk
Thank you for the good intentions, but I don't know how to do the above, I don't know anything about it.
What is the consequence of non-working this "widevine"?
KamilFromNorth said:
@marsian4uk
Thank you for the good intentions, but I don't know how to do the above, I don't know anything about it.
What is the consequence of non-working this "widevine"?
Click to expand...
Click to collapse
You will be not able to watch Netflix in full hd
Same problema here!!! in global rom.
@marsian4uk Today I downgraded from OOS11 to the first OOS10 room on OP7T and it did not work, the application orientation is still bad, the camera also has a menu rotated by 90 'and takes photos and videos in the same way. If you have time and feel like it, I would be grateful for tips on how to make the above changes - I don't care about Netflix, because I don't use it on my phone anyway.
KamilFromNorth said:
@marsian4uk Today I downgraded from OOS11 to the first OOS10 room on OP7T and it did not work, the application orientation is still bad, the camera also has a menu rotated by 90 'and takes photos and videos in the same way. If you have time and feel like it, I would be grateful for tips on how to make the above changes - I don't care about Netflix, because I don't use it on my phone anyway.
Click to expand...
Click to collapse
You make a backup of your persist?