Hello,
Finally I found a GSI ROM on which it is possible to enable VoLTE.
(thanks to @hackintosh5 )
Most users will be disappointed because it's a GSI based on A9 Pie and requires stock EMUI 8. (I don't think it's important, higher isn't always better...),
Tested ROM: Havoc-2.9-aonly . More information about Havoc can be found here
(inc. download link, guide, TWRP etc.)
For those who want to try it:
- be sure your phone is running EMUI 8
- Flash Havoc
- Download HWIms.zip magisk module
https://mega.nz/file/lt0VkaDY#hou-mruVYi1yp2MmUxzDukloTdttjn1X0kIbQGw4LDY
- Install TWRP
- Flash Magisk v20.3.zip in TWRP and install Magisk manager apk.
- In Magisk manager install HWIms.zip module
- Reboot .
Note: Thanks to Oreo VoLTE can be enabled also by installing "VoLTE-FIX-A11-hi6250.zip" by @DarkJoker360 in TWRP (without VoLTE icon in status bar)
Download
Note 2: If all this has worked on my device, it does not mean that it goes with everyone else.
Maybe it works on other a-only ROMs. I tried EvolutionX A, PixelExperience_Plus 9.0 A, etc. but couldn't boot them.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update: tried on EMUI 9.1 , LOSQ v224, no luck...
Hi!
How are perfomance and battery life?
Cheers
TureX said:
perfomance and battery life
Click to expand...
Click to collapse
Hi, honestly, I haven't tested perfomance and battery life or any other criteria, but it's certainly not worse than on a stock rom (as well as all custom ROMs on A8).
Hi!
I built a lineage 16 gsi for emui 8, could you please test if boot and if volte works too?
GSI lineageos 16 EMUI 8 october patch 2021
Cheers
TureX said:
Hi!
I built a lineage 16 gsi for emui 8, could you please test if boot and if volte works too?
GSI lineageos 16 EMUI 8 october patch 2021
Cheers
Click to expand...
Click to collapse
Hello dev , it boot and VoLTE works too.
The mentioned Magisk module does not work (is it really GSI? ). But thanks to Oreo VoLTE can be enabled by installing "VoLTE-FIX-A11-hi6250.zip" by @DarkJoker360 in TWRP (without VoLTE icon in status bar).
P.S.: browser doesn't work due to missing webview, but it can be easily fixed ->
https://forum.xda-developers.com/t/rom-official-anne-9-lineageos-16-0.4151163/post-85010583
P.S.: This is just my experience on ANE-LX1 8.0.0.178 (C432).
Hi!
Thanks for testing! I will fix webview on the next update! Yes is a gsi with @AndyYan patches so is strange that module is not working. However I will try to integrate that fix on gsi. Is fully working (nfc, GPS)?
Edit: I'm not a dev, just a maker
What is the error on magisk module?
Cheers
Hi!
New update is online! if someone is interested i will open a new thread and i will continue upload new images. Basically is a gsi with some dropped samsung patches.
GSI lineageos 16 EMUI 8 November patch 2021
Changelog :
Fixed webview
November security patch
I'm also upstreaming Labyrinth kernel.
Let me know if all is working good and if you want a new thread with regular updates!
Cheers
TureX said:
Hi!
New update is online! if someone is interested i will open a new thread and i will continue upload new images. Basically is a gsi with some dropped samsung patches.
GSI lineageos 16 EMUI 8 November patch 2021
Changelog :
Fixed webview
November security patch
I'm also upstreaming Labyrinth kernel.
Let me know if all is working good and if you want a new thread with regular updates!
Cheers
Click to expand...
Click to collapse
Sadly, most people want to install a Custom based on the latest Android version, even if the lower one works better .
TureX said:
Fixed webview
Click to expand...
Click to collapse
It works like a charm
TureX said:
I'm also upstreaming Labyrinth kernel
Click to expand...
Click to collapse
this relates to P8 lite (2017), if I'm not mistaken...
-Alf- said:
It works like a charm
this relates to P8 lite (2017), if I'm not mistaken...
Click to expand...
Click to collapse
HI!
Labyrinth is for hi6250, should works on p20 lite too.
Cheers
TureX said:
HI!
Labyrinth is for hi6250, should works on p20 lite too.
Cheers
Click to expand...
Click to collapse
I know, tried Labyrinth & Labyrinth_mod some time ago. ANE cannot boot with this kernel, tested on Oreo/Pie , Stock/GSI. Maybe I'm just unlucky or there's a problem with my device.
I think only two custom Kernels work on EMUI 9 - your Phenix and Papaya-v1.6.
-Alf- said:
I know, tried Labyrinth & Labyrinth_mod some time ago. ANE cannot boot with this kernel, tested on Oreo/Pie , Stock/GSI. Maybe I'm just unlucky or there's a problem with my device.
I think only two custom Kernels work on EMUI 9 - your Phenix and Papaya-v1.6.
Click to expand...
Click to collapse
Did you tried my last Labyrinth version?
I published a 4.4.230 version with security level patched(kernel doesn't boot with 2018-11 but seems OK with 2018-07 security level patch) and modem driver compatible with last baseband.
I have finished up streaming to 4.4.291 but I didn't publish because I was attempting for a feed back on Labyrinth thread(but no one give me feedback).
Edit : is only for emui 8
TureX said:
Did you tried my last Labyrinth version?
Click to expand...
Click to collapse
Of course, doesn't work.
Only Labyrinth v1.2 and rev1.3 worked for me (on Custom ROM) with SELinux enforcing & MorfuZ Kernel v5.6. with SELinux permissive (on Stock and Custom ROM).
Edit: P20 Lite
-Alf- said:
Of course, doesn't work.
Only Labyrinth v1.2 works (on Custom ROM) with SELinux enforcing & MorfuZ Kernel v5.6. with SELinux permissive (on Stock and Custom ROM).
Click to expand...
Click to collapse
HI!
Thanks for the feed back. Could you please send me pstore log?
About the volte icon, is missing on lineage, I will try to add in the next update( or maybe is better hiding for notch?)
Edit: kernel is just bootlooping on splash or give you errors on fastboot?
Cheers
TureX said:
HI!
Thanks for the feed back. Could you please send me pstore log?
About the volte icon, is missing on lineage, I will try to add in the next update( or maybe is better hiding for notch?)
Edit: kernel is just bootlooping on splash or give you errors on fastboot?
Cheers
Click to expand...
Click to collapse
I'm sorry, but I'm tired of being your private tester. When I wanted to test custom A10, A11 a year ago, I bought a used phone, I don't borrow it from my neighbor...
-Alf- said:
I'm sorry, but I'm tired of being your private tester. When I wanted to test custom A10, A11 a year ago, I bought a used phone, I don't borrow it from my neighbor...
Click to expand...
Click to collapse
Man, I don't want you as mine tester... I'm sorry if you feel this. I just ask in a public forum, I never tell you to do test first.
However, maybe we are only you and me to use custom thinks so Is maybe time to stop publish. If I can test, I will publish again. Have a good day!
Cheers
TureX said:
I just ask in a public forum
Click to expand...
Click to collapse
Apparently I misunderstood your post above, sorry.
TureX said:
Hi!
New update is online! if someone is interested i will open a new thread and i will continue upload new images. Basically is a gsi with some dropped samsung patches.
GSI lineageos 16 EMUI 8 November patch 2021
Changelog :
Fixed webview
November security patch
I'm also upstreaming Labyrinth kernel.
Let me know if all is working good and if you want a new thread with regular updates!
Cheers
Click to expand...
Click to collapse
Does this lineage work under EMUI8 (Prague) ?
AltairFR said:
Does this lineage work under EMUI8 (Prague) ?
Click to expand...
Click to collapse
HI!
Yes, is an a-only gsi
Cheers
I would look, on my side I rather develop under lineage 18
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Samsung Galaxy S10 series
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Note: SafetyNet passes by default. - So if you relied on Magisk for solely this, no longer required. - If you use Magisk (enable Magisk Hide for SafetyNet to work)
Based on Android 11.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
NFC
Sound / vibration
Known issues
Nothing groundbreaking, except VoLTE/VoWi-Fi which is due to Samsung's framework (Maybe one day it'll be fixed)
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download S10e build
Download S10 build
Download S10+ build
Want Magisk? Look here
Donate
turbolukex5 (ExpressLuke)
jhenrique09 (PE Developer)
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 11.0.0
Security patch level: January 2021
Build author/Device Maintainer: turbolukex5
Device Source code: https://github.com/ivanmeler/android_kernel_samsung_beyondlte/
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
Is there a plus build available
will work with latest fw?
@turbolukex5 you're a machine, the number of custom ROMs you make for this device is impressive! Thanks for your work!
Eidluci said:
Is there a plus build available
Click to expand...
Click to collapse
Too early yet for a plus build.
proyectos3d said:
will work with latest fw?
Click to expand...
Click to collapse
Works on all Q firmware revisions.
Any latest twrp OK, and is it better to make data F2FS or leave ext4?
trancinguy said:
Any latest twrp OK, and is it better to make data F2FS or leave ext4?
Click to expand...
Click to collapse
Leave data as ext4. Latest twrp will work fine.
Hello,
I've read the description about VoLTE not working due to samsung restrictions. But does this apply to VoWifi too? Or does it work on this rom.
Thanks
mariusfl0rian said:
Hello,
I've read the description about VoLTE not working due to samsung restrictions. But does this apply to VoWifi too? Or does it work on this rom.
Thanks
Click to expand...
Click to collapse
VoWifi also doesn't work.
Safety net pass confirmed Google pay and anything else. The only issue I have is trying to get games full screen. Does anyone know how to force full screen at the top instead of a black bar in games?
Edit: There seems to be a way in developer options. Since changing it though the game I want crashes. I think it's more to do with the game than the ROM though as I've been unable to run the game without issues on any android 11 rom.
Frazer Scott said:
Safety net pass confirmed Google pay and anything else. The only issue I have is trying to get games full screen. Does anyone know how to force full screen at the top instead of a black bar in games?
Edit: There seems to be a way in developer options. Since changing it though the game I want crashes. I think it's more to do with the game than the ROM though as I've been unable to run the game without issues on any android 11 rom.
Click to expand...
Click to collapse
game likely need to be updated to support "full screen" displays. good to hear safetynet is working for you
turbolukex5 said:
game likely need to be updated to support "full screen" displays. good to hear safetynet is working for you
Click to expand...
Click to collapse
It works fine on Samsung ROMs where I tap the app icon and change the ratio to make it full screen but there doesn't seem to be any way without issues on any non Samsung ROM. There is a black bar at the side with the camera notch. If I figure it out I'll let you know. It only happens on the apps that need tweaking on Samsung ROMs too.
Working great on Galaxy S10e. Coming from LOS 18, flash via TWRP.
Is it possible to dirty flash this over pixel experience 10(plus) or is a clean flash recommend ?
ILOIVE said:
Is it possible to dirty flash this over pixel experience 10(plus) or is a clean flash recommend ?
Click to expand...
Click to collapse
You will have to wipe....
---------- Post added at 10:29 AM ---------- Previous post was at 10:28 AM ----------
Hi there Luke
Thanks for this great ROM, i flashed it this morning, its awesome, smooth and like the authentic Pixel Experience. I also like that the launcher has the new suggested apps feature. Very cool. Keep it up and kudos! (And SD card works on SD10e )
Hi there,
Does anyone know, maybe @turbolukex5 is it possible to dirty flash over your Evolution X (android 11, also working over Lineage recovery, with magisk root)?
Thank you!
grujea said:
Hi there,
Does anyone know, maybe @turbolukex5 is it possible to dirty flash over your Evolution X (android 11, also working over Lineage recovery, with magisk root)?
Thank you!
Click to expand...
Click to collapse
P.S.: Can I do this via Lineage Recovery? If yes, how? (I've only used TWRP for flashing) or do I need to flash via Odin TWRP before?
grujea said:
P.S.: Can I do this via Lineage Recovery? If yes, how? (I've only used TWRP for flashing) or do I need to flash via Odin TWRP before?
Click to expand...
Click to collapse
Wouldn't recommend doing that, and you can flash using lineage recovery
turbolukex5 said:
Wouldn't recommend doing that, and you can flash using lineage recovery
Click to expand...
Click to collapse
Thanks for your reply, and sorry for persisting!
Would the magisk patched lineage recovery remain untouched? Or will it be necessary to re-flash it via Odin after flashing PE OS?
Better than that, is it possible to flash the .img recovery file via Lineage Recovery, like in TWRP? I'm unable to find an answer to this question by googling (and in the Lineage Recovery I can only find the option to flash .zip files).
Thank you once more!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NDataX Kernel
Samsung Galaxy A51
NDataX is a custom kernel, bringing stability & improvement, without reducing performance. Beside, this kernel is aiming for less-developed devices.
Code:
- Disabled auto reboot when panic (random reboot)
- Fixed MTP issue in GSI variant
- Enabled all CPU Governors & I/O Scheduler
- Removed security restriction
- Removed verify & avb flags (no need to flash dm verity disabler again)
- WireGuard suppport
- Kali NetHunter support (Wi-Fi adapter v2-v3 support coming soon)
- Upstreamed to v4.14.140
- Some adjustment to stability which I forgot
Github Release
- Requirements:
Stock OneUI 2.5 ROM (Port or stock) or custom ROM (GSI, etc)
TWRP 3.5 by @ianmacd (search in YouTube. @redymedan created the video tutorial, iirc his channel is Android How-To)
Bootloader unlocked of course
- Installation steps:
Download one of this kernel zip based on your ROM type. Stock variant for stock, Custom variant for custom / GSI rom
Direct flash the zip. Note that if you installed magisk before, then it will not removed.
Simply reboot and enjoy
If you feel this kernel is helpful, and want to help me build by donating, here is the answer : Don't donate to me, donate to other people that more need donation. Like charity or other. I'm not being rude, or don't want to be helped, or whatever. This kernel is builded in my free time, so I don't do this for job, but just my hobby.
Additionally, if you want to say thanks, then just like this thread and/or click thanks button. That will be very appreciated!
Source: https://github.com/hendramn/NDataX_a51
Defconfig: ndx_defconfig
Toolchain: AOSP GCC 4.9, branch ndk-release-r18; Clang 4639204
Build script: build.sh
My source is freely used for anyone. You can fork it, clone it, even build it without my permission. But, if you want to rebuild kernel, add other features, and share to somewhere, please add my credit! Atleast my XDA username. It will be very appreciated
17022021: My source will be reworked. This means these current source URL will dead, or fully different. Don't worry, I'll of course link it later
Allah SWT.
My parents, family, and other support
Linux; Samsung for base source
@Yillié for some references and knowledge
@redymedan and @azteria2000 for testing
@nathanchance , @kdrag0n , kerneltoast, @erfanoabdi for commit references
@osm0sis for his AnyKernel
And other people which I cherry-pick their commit and/or support me.
Thanks for using my kernel. Hope you guys like it. Thank you very much!
Reserved - Changelog
News & other.
09-02-2021: Since samsung release Android 11 source along wity OneUI 3 (will world-wide soon), NDataX will support Android 1 as well as Android 10. But, Android 10 support will EOL (end of life) when OneUI 3 is already world-wide. Why? It's difficult to maintain 2 Android version support, because we don't know what Samsung do & changes in each source.
17-02-2021: My source will be reworked. This means these current source URL will dead, or fully different. Don't worry, I'll of course link it later
Thank you for kernel.Whats antutu score
Fatih27 said:
Thank you for kernel.Whats antutu score
Click to expand...
Click to collapse
I didn't check it. It should better but not far from stock since I depends the stability for now
I need help, after flashing this onto my A51, it won't get out of the bootscreen
I'm not sure if I did something wrong but I followed all steps.
Shawny16k said:
I need help, after flashing this onto my A51, it won't get out of the bootscreen
I'm not sure if I did something wrong but I followed all steps.
Click to expand...
Click to collapse
Hi sir, sorry for making you got bootloop. What ROM you in? GSI or OneUI? Also if OneUI, which version. Thanks
hendramanu said:
Hi sir, sorry for making you got bootloop. What ROM you in? GSI or OneUI? Also if OneUI, which version. Thanks
Click to expand...
Click to collapse
OneUI 2.5, It's Android 10 TPA not sure why I'm having this issue
Shawny16k said:
OneUI 2.5, It's Android 10 TPA not sure why I'm having this issue
Click to expand...
Click to collapse
actually I think I fixed the issue, I formatted and it finally passed the boot screen, I'll let you know if anything else occurs.
Shawny16k said:
actually I think I fixed the issue, I formatted and it finally passed the boot screen, I'll let you know if anything else occurs.
Click to expand...
Click to collapse
Great to see you fix it. But format data solution is hard to do on some user, because they may keep important data and not able to backup.
Do you remove the encryption after flashing TWRP before? With formatting data & flashing DM Verity disabler. When encryption is removed then TWRP should not error of unable to mount /data
hendramanu said:
Great to see you fix it. But format data solution is hard to do on some user, because they may keep important data and not able to backup.
Do you remove the encryption after flashing TWRP before? With formatting data & flashing DM Verity disabler. When encryption is removed then TWRP should not error of unable to mount /data
Click to expand...
Click to collapse
I don't have much important data in this phone plus I've formatted this phone a lot cause of the random reboot issue I had and no I never had encryption.
Shawny16k said:
I don't have much important data in this phone plus I've formatted this phone a lot cause of the random reboot issue I had and no I never had encryption.
Click to expand...
Click to collapse
Okay sir. Thank you for using my kernel. Any problem you face?
hendramanu said:
Okay sir. Thank you for using my kernel. Any problem you face?
Click to expand...
Click to collapse
not as of yet, seems to be working fine
Will this work with other GSIs such as Pixel 2 android 11 Gsi from erfan, because I'm getting boot loop in almost all of them except phh_treble GSIs which are quite buggy
GrandmaGotGuns said:
Will this work with other GSIs such as Pixel 2 android 11 Gsi from erfan, because I'm getting boot loop in almost all of them except phh_treble GSIs which are quite buggy
Click to expand...
Click to collapse
Tested in RR GSI. It works fine. So it should work fine for other GSIs
Also what do you mean for bootloop? My kernel or GSI? Thanks!
hendramanu said:
Tested in RR GSI. It works fine. So it should work fine for other GSIs
Also what do you mean for bootloop? My kernel or GSI? Thanks!
Click to expand...
Click to collapse
Its Probably the GSI, cause OEMs do not release the source code so its a nightmare to patch em
GrandmaGotGuns said:
Its Probably the GSI, cause OEMs do not release the source code so its a nightmare to patch em
Click to expand...
Click to collapse
Do you use Android 11 firmware as base? I mean you maybe update to OneUI 3 and then flash GSI?
hendramanu said:
Do you use Android 11 firmware as base? I mean you maybe update to OneUI 3 and then flash GSI?
Click to expand...
Click to collapse
No I Didn't but tried the same thing from Lineage OS 18.1 and AOSP android 11
GrandmaGotGuns said:
No I Didn't but tried the same thing from Lineage OS 18.1 and AOSP android 11
Click to expand...
Click to collapse
No, I mean when you in stock do you update it to OneUI 3.0 (Android 11)? Or flash Android 11 firmware via odin before GSI?
Though I know that I need to change kernel's behavior from enforcing to permissive and for that I flashed Permissiver v5 but still the Boot loop
LineageOS 19.1 for Sony Xperia XZ1 Compact
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ1 Compact, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything (preferably dmesg and logcat). I can't test NFC very thoroughly, to please report your findings.
FEATURES
Signed with dev keys
Up-to-date kernel
WireGuard kernel support
DOWNLOAD
You can download the latest ROM releases here: https://androidfilehost.com/?w=files&flid=333224
Latest TWRP: https://dl.twrp.me/lilac/
Check the ChangeLog below for firmware requirements!
INSTALLATION
Before first install: flash and boot into TWRP, format data, reboot to recovery and wipe all internal partitions.
After above step / any subsequent dirty flashes: Boot into recovery, put the ROM, GApps and root (if needed) on sdcard and flash.
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
When updating from previous builds, simply dirty flash the ROM, together with any GApps and/or other modifications - addon.d will not work due to currently unavailable TWRP decryption.
Recommended GApps: MindTheGapps-12.1.0
KNOWN ISSUES
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
You tell me...
Contributors
derf elot, modpunk, Rooted_Ansh
Thanks to the yoshino testers (let me know if I forgot to add you)
coin3x, feduss, GiaSen, Gizanagi, hsheemi, kaancaliskan, sohrab1985
Source Code
https://github.com/whatawurst/android_device_sony_lilac
https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 12
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Current Stable Version: 1.6
Stable Release Date: 2022-09-18
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
How to get root?
As mentioned before, there will not be an official su addon from LOS anymore. If you need root, flash an unofficial solution.
REQUIRED FIRMWARE:
CHANGELOG
2022-09-18 | 1.6| 47.2.A.11.228
* Final release, fixed DRM, WebView/Chrome issues in 1.5
* GPS config update
2022-04-20 | 1.3| 47.2.A.11.228
Initial release
tried ver.1.3 but still have issues with split screen not working after loading all my apps. gets trebuchet errors. didn't have time to get logs or troubleshoot what app causes it. but im not getting it with flamefires 17.1
Nice to have a separate LineageOS 19.1 for XZ1C thread, but it might be nice to credit this ROM to @derf elot more explicitely in the OP, since it seems to be mostly his work.
Rrreutel said:
Nice to have a separate LineageOS 19.1 for XZ1C thread, but it might be nice to credit this ROM to @derf elot more explicitely in the OP, since it seems to be mostly his work.
Click to expand...
Click to collapse
No worries, I asked @No1Alien if he could open the thread since I don't have much time to maintain it
Hi guys, an first of all thanks for the work you've done.
Now i'm bit confuse, i'v achieved the flashing of the os correctly (or maybe not) but i didn't update the firmware (an i think it's why my sim card is not detected). Question is : where can i find the firmware update "2022-04-20 | 1.3| 47.2.A.11.228" ? On sony website i only see 2021-12-06 for xz1c.
Am i missing something ?
Denam said:
Hi guys, an first of all thanks for the work you've done.
Now i'm bit confuse, i'v achieved the flashing of the os correctly (or maybe not) but i didn't update the firmware (an i think it's why my sim card is not detected). Question is : where can i find the firmware update "2022-04-20 | 1.3| 47.2.A.11.228" ? On sony website i only see 2021-12-06 for xz1c.
Am i missing something ?
Click to expand...
Click to collapse
2022-04-20 lineage 19.1 rom ver 1.3
47.2.A.11.228 Sony firmware
Updated in dirty way over LOS 18.1 from this forum, everything works including Zygisk and contactless payments
Hello, nice job. What TWRP version is needed ?
Very nice work! Haven't been able to test much yet, but when I picked it up just now after some days, I could see that battery drain does not seem to be an issue:
(This is not real-world usage though: wifi is on, but no SIM card, and just sleeping)
Rom lineage-19.1-20220408-UNOFFICIAL-1.2-lilac
Magisk 24.3
MindTheGapps 12.1.0
twrp 3.6.1_9-0-lilac
Running this on a spare XZ1 for testing. If the camera does eventually work one day, I think ill go to ebay aand buy a new XZ1c.
Thank you for all your hard work.
I'm currently on Havoc-OS 4.16 but can i flash Lineage 19 over Havoc? How to create backup of current Havoc in TWRP if i want to get back from Lineage OS 19? What should i select when creating backup?
Corias said:
Updated in dirty way over LOS 18.1 from this forum, everything works including Zygisk and contactless payments
Click to expand...
Click to collapse
Hi! Do you lose the homescreen arrangement (widgets, folders..) when you do this? (Trying to see if there's an advantage to dirty flashing)
Regards!
Dean F said:
Running this on a spare XZ1 for testing. If the camera does eventually work one day, I think ill go to ebay aand buy a new XZ1c.
Thank you for all your hard work.
Click to expand...
Click to collapse
Hi, check the last pages of the 18.1 thread, there's a link there. Someone got it working, seemingly. Still an early version, slow motion mode at least doesn't work and I'm uncertain on whether there's actually an improvement in quality vs open camera (took 2 pics to compare but didn't see any difference) but, still.. It works!
Hi and thank you (also to Derfy )! Great to see LOS 19 for this thing .
Question: I dirty flashed from latest available LOS 18.1, wiped Dalvik & cache, installed the MindTheGapps package as recommended, but swiping is gone on the AOSP keyboard. I can kill the AOSP keyboard forcibly, and then swiping came back just once but immediately disappeared again. Anyone else seeing this?
.:B:. said:
Hi and thank you (also to Derfy )! Great to see LOS 19 for this thing .
Question: I dirty flashed from latest available LOS 18.1, wiped Dalvik & cache, installed the MindTheGapps package as recommended, but swiping is gone on the AOSP keyboard. I can kill the AOSP keyboard forcibly, and then swiping came back just once but immediately disappeared again. Anyone else seeing this?
Click to expand...
Click to collapse
Have you tried turning it off and on again?
(tends to happen on first boot, no idea why)
Yes, multiple times .
claudiobar said:
Do you lose the homescreen arrangement (widgets, folders..) when you do this?
Click to expand...
Click to collapse
Maybe. I didn't use Trebuchet with LOS 18, so I can't say if the icons were in same places.
BTW guys how can I set an accent color in LOS 19?
Corias said:
Maybe. I didn't use Trebuchet with LOS 18, so I can't say if the icons were in same places.
BTW guys how can I set an accent color in LOS 19?
Click to expand...
Click to collapse
By changing the wallpaper, it automatically chooses accent colors based on it. It's how "Material You" works.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Xiaomi Mi 11 Lite 4G [Courbet]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 13.0
Whats working?
Wifi
Wifi hotspot
RIL
Mobile data
GPS
Sensors
Camera
Flashlight
Camcorder
Bluetooth
NFC/GPAY
Lights
Sound / vibration
Fingerprint
WiFi Display
VoLTE
Double Tap To Wake
Google Voice Match
SELinux enforcing
VoWifi
Safetynet
DON'T FLASH GAPPS, ALREADY INCLUDED
Download standard version from Android File Host
Download PLUS version from Android File Host
Screenshots:
Flashing Instructions:
Pre-installation:
Pixel Experience Recovery (Download from here)
First time installation:
Fastboot or flash recovery image
Reboot to new recovery
Click on Factory Reset --> Format data/factory reset
Click on apply update and sideload the zip file or install it using an USB OTG
Enjoy
About Camera: stock camera app is Google Camera modded by BSG version MGC_8.1.101_A9_GV2b_ENG, can be updated with all BSG version, download the ENG package and install it. Google playground is also working, can be installed from here (Playground_2.9build-2.11.220118016.apk). If google playground stuck with a black screen go in Settings --> App -- App List --> Google Playground and grant notification permission. The camera process is allowed to stay alive in background like in Pixel phones, this improves the speed opening the app, if you see camera process running in background for hours it's normal.
XDA:DevDB Information
Pixel Experience, ROM for the Xiaomi Mi 11 Lite 4G
ROM OS Version: Android 13
ROM Kernel: Linux 4.14
Based On: AOSP
Source Kernel repo: Vantoman Kernel with PSI support
Courbet device tree repo: Forked from PixeOS
Xiaomi sm6150-common repo: Forked from PixelOS
Vendor repo: From PixelOS
Special thanks to
LineageOS
Pixel Experience
PixelOS
BSG
vantoman
could you share some screenshots? thanks for this rom
New build is available for download, here's the direct link
Changelog
Kernel
- Merged updates from VantomKernel
ROM
- Merged February security patches
- Misc updates/improvements on device tree
@Clavelol sorry for the terribly late reply, i'm focused on Mi5 development in these weeks as it needs a lot of work, i did not see your reply, screenshot added
-+BB+- said:
New build is available for download, here's the direct link
Changelog
Kernel
- Merged updates from VantomKernel
ROM
- Merged February security patches
- Misc updates/improvements on device tree
@Clavelol sorry for the terribly late reply, i'm focused on Mi5 development in these weeks as it needs a lot of work, i did not see your reply, screenshot added
Click to expand...
Click to collapse
it's okay! i understand that you are focused on your work, i ended up flashing it, i like pixel os very much, your port is very good, keep it up with the good work!
hi, thankyou for the rom i really like it and it's very stable. do you have any support channel like in telegram or something? so that i'll know if there is an update. once again thankyou so much!
ukinonnn said:
hi, thankyou for the rom i really like it and it's very stable. do you have any support channel like in telegram or something? so that i'll know if there is an update. once again thankyou so much!
Click to expand...
Click to collapse
Hi, I'm glad you like it! Unfortunately I don't have a Telegram channel, but you can click "watch" at the top of the page and receive an email when someone post on this thread, i will post a message with a small changelog and the download link everytime an update is out
-+BB+- said:
Hi, I'm glad you like it! Unfortunately I don't have a Telegram channel, but you can click "watch" at the top of the page and receive an email when someone post on this thread, i will post a message with a small changelog and the download link everytime an update is out
Click to expand...
Click to collapse
okay man, thank you
The build is perfect! when new builds come out, when applying the new build, the data is going to be deleted? In sense when applying the update the data is going to be factory resetted? Also, fast charging is not working!
Thank you again!
göremiyorum
fulvio13 said:
The build is perfect! when new builds come out, when applying the new build, the data is going to be deleted? In sense when applying the update the data is going to be factory resetted? Also, fast charging is not working!
Thank you again!
Click to expand...
Click to collapse
No you don't need to wipe internal storage every update, just enter in recovery, flash the zip using adb sideload or an USB OTG and reboot when flash is over.
PS: tested right now fast charge with my PC, power bank and power supply and works fine for me, please check your cable or your power supply (i've changed one of my cables a couple of days ago for a similar reason, fast charge working randomly and adb stops every few seconds with all my devices)
Is it also possible to add OTA updates or is it difficult to do and make? Thank you! (The fast charging works!)
fulvio13 said:
Is it also possible to add OTA updates or is it difficult to do and make? Thank you! (The fast charging works!)
Click to expand...
Click to collapse
PE has an OTA update app, but is for official builds only, if someday the ROM will become official you will also have OTA updates
EDIT: glad that fast charge is working, out of curiosity: what was the problem?
Hi to everyone, march update is available for download, here's the changelog:
ROM
- Update sources to latest PE updates
- Merged AOSP android-13.0.0_r35 updates
Kernel
- Merged kernel updates from Vantoman
Here's the direct link for download
Enjoy
-+BB+- said:
Hi to everyone, march update is available for download, here's the changelog:
ROM
- Update sources to latest PE updates
- Merged AOSP android-13.0.0_r35 updates
Kernel
- Merged kernel updates from Vantoman
Here's the direct link for download
Enjoy
Click to expand...
Click to collapse
Hi, i download this, i have the 20230218, How can I update everything without losing any data? (I also have root with magisk)
FF999 said:
Hi, i download this, i have the 20230218, How can I update everything without losing any data? (I also have root with magisk)
Click to expand...
Click to collapse
You can sideload the zip as usual, magisk should be there without the need of reinstalling it. If you lose root after the flash, simply flash again magisk
Hey Bro im using this build and it was impressive, the only thing it misses is the Live Display function.... Besides it run flawlessly i love that the GCAM is the default camera and i hope you build a plus edition for courbet too!!!
-+BB+- said:
New build is available for download, here's the direct link
Changelog
Kernel
- Merged updates from VantomKernel
ROM
- Merged February security patches
- Misc updates/improvements on device tree
@Clavelol sorry for the terribly late reply, i'm focused on Mi5 development in these weeks as it needs a lot of work, i did not see your reply, screenshot added
Click to expand...
Click to collapse
sorry I just want to ask, is there no build pixel experience plus? did you build only 1 version?
I really like this rom ..very stable
But we need some add features like Network traffic , app lock, like cdriod rom custom States bar and etc.
hi,
i have this error when i try to install the ROM, can you help me please
Patching system image unconditionally .....
E1001 Failed to update system image
ERROR : Recovery : Error in /sideload/package.zip (status 1)
mimiyuuuh said:
Hey Bro im using this build and it was impressive, the only thing it misses is the Live Display function.... Besides it run flawlessly i love that the GCAM is the default camera and i hope you build a plus edition for courbet too!!!
Click to expand...
Click to collapse
hellcatlearn said:
sorry I just want to ask, is there no build pixel experience plus? did you build only 1 version?
Click to expand...
Click to collapse
I'm sorry but unfortunately Plus edition require more or less 500 Gb of free space for sources and compiling, actually I don't have all that free space in my NVMEs, I'm already using 650+ Gb for PE and my 3 devices (gemini, grus and courbet).
Amr fego said:
I really like this rom ..very stable
But we need some add features like Network traffic , app lock, like cdriod rom custom States bar and etc.
Click to expand...
Click to collapse
Please see my previous answer, the feature you are requesting belongs to Plus version
Tarik5000 said:
hi,
i have this error when i try to install the ROM, can you help me please
Patching system image unconditionally .....
E1001 Failed to update system image
ERROR : Recovery : Error in /sideload/package.zip (status 1)
Click to expand...
Click to collapse
Did you check the MD5 of the downloaded zip file? Probably it's a corrupted download, but without the recovery log it's impossible to understand what happened
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Miui mind is a xiaomi.eu based rom. It includes a lot of customization. And performance optimization has been made. It works fully compatible with No Gravity [NGK] Kernel.More users are needed for further development.
Miui 13 | Android 12.Stable release Updated: 2023-04-01Use this Twrp for Flashing
Download - DonwloadInstructions : flash rom as usualBugs: No NFC - Face Id Fix coming soonChangelog :
- latest version fixes face id and volume theming (If face unlock not working try France Region)- you mixed screenshot with old version and new version - NFC is still an issue, we are investigating what's wrong - GPS is partially fixed
3lambda said:
Next port will be miuisr (miui 14 on android 13)Follow our work on the link sasafat posted in op
Click to expand...
Click to collapse
Notes: • Clean Flash Mandatory • Rom fully adapted for DipperPort and fixes By @I3lambda Thanks to testers : @CarlosDev122 , @E1rhan and John !Telegram Links:
News and Updates: LINKHelp and discussion section: LINK
3lambda said:
Hello sasafat, thanks for sharing my rom here
Here's few point :
- latest version fixes face id and volume theming
- you mixed screenshot with old version and new version
- NFC is still an issue, we are investigating what's wrong
- GPS is partially fixed
Next port will be miuisr (miui 14 on android 13)
Follow our work on the link sasafat posted in op
Click to expand...
Click to collapse
I flashed via twrp but it stuck on logo?
Ziyad91 said:
I flashed via twrp but it stuck on logo?
Click to expand...
Click to collapse
Flash this via twrp.
Nice!
Yes! Finally! @sasafat thank you very much for your developement/porting of this ROM to Dipper
You don't know how much I anticipated for something like this, a dream becomes true, this ROM will make our phones longer usable, Android 12 with MIUI 13 - really a dream which becomes true.
Have to try it, I think, that I will flash it in the next week, if you want to, I would really like to help you out, for testing and all the other things, which are needed for further development - I don't know everything, but I'm a techie since 2007 so maybe I can help - just write a message or quote me here
Hello sasafat, thanks for sharing my rom here
Here's few point :
- latest version fixes face id and volume theming
- you mixed screenshot with old version and new version
- NFC is still an issue, we are investigating what's wrong
- GPS is partially fixed
Next port will be miuisr (miui 14 on android 13)
Follow our work on the link sasafat posted in op
Face unlock and double tap to wake screen while aod is enabled doesn't work for me. Did clean flash 2 times with no success. Any suggestions?
moviefirst said:
Face unlock and double tap to wake screen while aod is enabled doesn't work for me. Did clean flash 2 times with no success. Any suggestions?
Click to expand...
Click to collapse
If you don't have the option for face unlock you must change region (France work)
For double tap you need ngk app and put the setting here
sasafat said:
Flash this via twrp.
Click to expand...
Click to collapse
i got error 1 while flashing this , help
3lambda said:
你好莎莎法特,谢谢你在这里分享我的罗姆
这里有几点：
-最新版本修复了面孔身份证明(识别)和体积主题
-你把旧版本和新版本的截图混在一起了
- NFC仍然是一个问题,我们正在调查问题所在
全球定位系统部分固定
下一个端口将是miu ISR(Android 13上的miui 14)
请关注我们在外科手术中发布的链接莎莎法
Click to expand...
Click to collapse
3lambda said:
你好sasafat，谢谢你在这里分享我的rom
这里有几点:
-最新版本修复了面孔id和体积主题
-你把旧版本和新版本的截图混在一起了
- NFC仍然是一个问题，我们正在调查问题所在
- GPS部分固定
下一个端口将是miu ISR(Android 13上的miui 14)
请关注我们在op中发布的链接sasafat
Click to expand...
Click to collapse
When will MIUI 14 on Android 13 arrive? Looking forward to it. I am a Chinese user who uses translation software to type this sentence, I hope you can understand my reply. Ha ha!
3lambda said:
If you don't have the option for face unlock you must change region (France work)
For double tap you need ngk app and put the setting here
Click to expand...
Click to collapse
No success with face unlock no matter which region I try. Think I'll wait for MIUIsr 14 on a13 maybe have more success then. Thx for replying!
moviefirst said:
No success with face unlock no matter which region I try. Think I'll wait for MIUIsr 14 on a13 maybe have more success then. Thx for replying!
Click to expand...
Click to collapse
For face unlock, you need to select the france region. Thank you.
3lambda said:
Hello sasafat, thanks for sharing my rom here
Here's few point :
- latest version fixes face id and volume theming
- you mixed screenshot with old version and new version
- NFC is still an issue, we are investigating what's wrong
- GPS is partially fixed
Next port will be miuisr (miui 14 on android 13)
Follow our work on the link sasafat posted in op
Click to expand...
Click to collapse
You're welcome, Seth, if there's anything you want me to add, something you want me to fix, just let me know.
sasafat said:
For face unlock, you need to select the france region. Thank you.
Click to expand...
Click to collapse
I did set it to France but really no success. But I really appreciate your work and keeping our great device with new miui. Hope we will get new updates with passing safety net and all other stuff working if possible. Because this device is still one of the best. Thank you!
4KMaxSetting said:
i got error 1 while flashing this , help
Click to expand...
Click to collapse
Install this firmware and rom:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Hi,
first, I like to thank you for this great port. I never expected MIUI13 on Mi8 so I used Pixelexperience since two years.
Your port run much smoother and the trick with "choose france for face-id" works very well too.
I only have one problem with GPS accuracy (as you mentioned). Can you fix this, because it works only partitially or do you focus on Android 13 and GPS ist out of scope?
Bye
Ray
rayblue1 said:
Hi,
first, I like to thank you for this great port. I never expected MIUI13 on Mi8 so I used Pixelexperience since two years.
Your port run much smoother and the trick with "choose france for face-id" works very well too.
I only have one problem with GPS accuracy (as you mentioned). Can you fix this, because it works only partitially or do you focus on Android 13 and GPS ist out of scope?
Bye
Ray
Click to expand...
Click to collapse
We have tried many things for GPS, and we can't properly fix it, we will try to fix it for miui 14 android 13 (and fix NFC too)
As you know porting roms isn't easy, and it's already a miracle we are able to run miui 13 on android 12
3lambda said:
We have tried many things for GPS, and we can't properly fix it, we will try to fix it for miui 14 android 13 (and fix NFC too)
As you know porting roms isn't easy, and it's already a miracle we are able to run miui 13 on android 12
Click to expand...
Click to collapse
Hi,
Thanks for your reply. I know you did some kind of kagic with A12 on Mi8 Dipper and apprechiate that very much! Google Maps and Adidas Running recognizes the resent position correctly but cant move/navigate. Maybe a hint for further investigations ? Let me know if you need testers.
I'm very happy with your port because it's the only one where waking-up the display works reliable: incomming call, ringing alarm clock, lift from table, double tap Screen, face id.
Bye, Ray
Looks promising, would love to give this a try but sadly NFC is a must to me, good luck to the devs!