Related
I recently picked up a D851 (TMobile). I rooted it, but did not replace the ROM or install a custom bootloader.
Last weekend, the phone started randomly rebooting. Watching logcat via adb showed me several random apps throwing sig11s, after which the phone would give up and reboot. Cycle repeats.
This looks like a hardware issue, as the apps that crash change on each boot cycle.
I arranged with TMobile to swap the device, but they cautioned me that the phone must be returned to an unrooted state.
I've had a hell of a time with it from here. My first try was to install the LG drivers and the PC Suite under a Windows VM, as I do not run Windows at home. Enabling USB passthrough for the phone to the VM let Windows see the phone, but the LG drivers would invariably fail with 'Device cannot start. Code 10.'. Likewise, the PC Suite couldn't find the phone.
Next step was to throw together some spare hw and install Windows 7 on that (a desparate move, to be certain. ). The LG drivers can now recognize the phone, so that's a definite plus. The LG PC Suite, though, claimed that my phone could not be upgraded. Wonderful.
Next step was to try this tutorial: http://www.androidrootz.com/2014/07/how-to-unroot-lg-g3-all-variants.html . I was able to get further with this method, but as it begins to flash SYSTEM, it pauses, and then dies with 'We can't communicate with Phone'. End result - I now have a soft bricked phone. On the phone, I see the port - COM41 - appear, and the usb animation starts to spin ... and after a few seconds, stops. It's at this point that Flashtool throws the Can't Connect error.
I next tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=2785089 to flash a KDZ. The newer LG Flash tool used here can't create a connection to my phone for flashing.
I've run into a wall here. Any ideas on where to go next? I need to reset this phone back to a working stock state so that I can send it back.
http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/
Use this and follow video carefully. Has worked many times. Use all his links not what you have downloaded.
NOTE 4
BACARDILIMON said:
http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/
Use this and follow video carefully. Has worked many times. Use all his links not what you have downloaded.
NOTE 4
Click to expand...
Click to collapse
Also - as silly as it sounds, make certain you're using the USB cable that came with the phone. This has solved problems for a lot of people when trying to revert to stock.
etawful said:
Also - as silly as it sounds, make certain you're using the USB cable that came with the phone. This has solved problems for a lot of people when trying to revert to stock.
Click to expand...
Click to collapse
I wasn't initially, but I did switch to it last night. Still no go.
I suspect it's either the phone itself (see above: re suspected hw failure), or the PC in question (nVidia chipset on this old motherboard, and I've had more than a few problems with adb talking to phones on nVidia motherboards). I'm going to try Bacardilimon's suggestion tonight, on a PC that has *nothing* nVidia-related in it, before I throw in the towel. As it is, the failing phone needs to be back to TMO by the middle of next week, so I'm all but out of time to resolve this.
Drake Maijstral said:
I recently picked up a D851 (TMobile). I rooted it, but did not replace the ROM or install a custom bootloader.
Last weekend, the phone started randomly rebooting. Watching logcat via adb showed me several random apps throwing sig11s, after which the phone would give up and reboot. Cycle repeats.
This looks like a hardware issue, as the apps that crash change on each boot cycle.
I arranged with TMobile to swap the device, but they cautioned me that the phone must be returned to an unrooted state.
I've had a hell of a time with it from here. My first try was to install the LG drivers and the PC Suite under a Windows VM, as I do not run Windows at home. Enabling USB passthrough for the phone to the VM let Windows see the phone, but the LG drivers would invariably fail with 'Device cannot start. Code 10.'. Likewise, the PC Suite couldn't find the phone.
Next step was to throw together some spare hw and install Windows 7 on that (a desparate move, to be certain. ). The LG drivers can now recognize the phone, so that's a definite plus. The LG PC Suite, though, claimed that my phone could not be upgraded. Wonderful.
Next step was to try this tutorial: http://www.androidrootz.com/2014/07/how-to-unroot-lg-g3-all-variants.html . I was able to get further with this method, but as it begins to flash SYSTEM, it pauses, and then dies with 'We can't communicate with Phone'. End result - I now have a soft bricked phone. On the phone, I see the port - COM41 - appear, and the usb animation starts to spin ... and after a few seconds, stops. It's at this point that Flashtool throws the Can't Connect error.
I next tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=2785089 to flash a KDZ. The newer LG Flash tool used here can't create a connection to my phone for flashing.
I've run into a wall here. Any ideas on where to go next? I need to reset this phone back to a working stock state so that I can send it back.
Click to expand...
Click to collapse
There is a link in the general thread on how to return to stock including a method using twrp. It's a sticky thread at the top I've never done the twrp method myself but it can more than likely be done without a computer. Twrp can be installed via Playstore if you don't already have it
BACARDILIMON said:
httx://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/
Use this and follow video carefully. Has worked many times. Use all his links not what you have downloaded.
NOTE 4
Click to expand...
Click to collapse
Holy hell. That site's links are absolutely infuriating. Anyone who puts each and every download link for software referenced by a howto behind separate timed appearance links that you have to ALSO enter an annoying captcha to enable should be shot out of a cannon - or, at the very least, have their howto ignored by the rest of the world.
Suffice it to say, the quality of that page doesn't give me much confidence that this will work any better than what I've tried already. Since I've already wasted a crapload of time on this project, and more on following those damned links, I'll give it a try tonight, but I'm not going to hold my breath.
Is the author of that page an XDA member? If so, please let me know who he is, so I can berate him personally. Thanks.
Toneman07 said:
There is a link in the general thread on how to return to stock including a method using twrp. It's a sticky thread at the top I've never done the twrp method myself but it can more than likely be done without a computer. Twrp can be installed via Playstore if you don't already have it
Click to expand...
Click to collapse
I'd consider doing that, except as I mentioned, the G3 in question disconnected during a run of Flashtool, rendering it without a working OS to boot to. The phone now boots straight to download mode. The good news is, it's now officially unrooted. The bad news is, it's also officially bricked until I can get an OS flash to work.
Drake Maijstral said:
Holy hell. That site's links are absolutely infuriating. Anyone who puts each and every download link for software referenced by a howto behind separate timed appearance links that you have to ALSO enter an annoying captcha to enable should be shot out of a cannon - or, at the very least, have their howto ignored by the rest of the world.
Suffice it to say, the quality of that page doesn't give me much confidence that this will work any better than what I've tried already. Since I've already wasted a crapload of time on this project, and more on following those damned links, I'll give it a try tonight, but I'm not going to hold my breath.
Is the author of that page an XDA member? If so, please let me know who he is, so I can berate him personally. Thanks.
Click to expand...
Click to collapse
OK I gonna keep it real with you. You can either enter the captcha and fix the issue or throw the phone away. Yes he is a member and for every phone that is out their he has its own page doing this for us. If you can't fix your phone with his method then it not the method but you. I have used this for many bricks. It works and it works great. Sorry if he making you do a little typing but like I said u can use his method or keep trying the other methods. Good luck
NOTE 4
BACARDILIMON said:
OK I gonna keep it real with you. You can either enter the captcha and fix the issue or throw the phone away. Yes he is a member and for every phone that is out their he has its own page doing this for us. If you can't fix your phone with his method then it not the method but you. I have used this for many bricks. It works and it works great. Sorry if he making you do a little typing but like I said u can use his method or keep trying the other methods. Good luck
NOTE 4
Click to expand...
Click to collapse
After going through the painful process of clicking his links, I found that everything I downloaded is the same thing I already had, except for Flashtool - lgg3root's is actually older. Even the TMO firmware for my phone and the dll are both exactly the same, and I checked by running md5sum on them.
But hey, it must be me. There's clearly no other technology-related cause for this issue. I obviously don't know how to follow a howto, right?
Thanks for 'keeping it real'.
Drake Maijstral said:
After going through the painful process of clicking his links, I found that everything I downloaded is the same thing I already had, except for Flashtool - lgg3root's is actually older. Even the TMO firmware for my phone and the dll are both exactly the same, and I checked by running md5sum on them.
But hey, it must be me. There's clearly no other technology-related cause for this issue. I obviously don't know how to follow a howto, right?
Thanks for 'keeping it real'.
Click to expand...
Click to collapse
See we agree.
NOTE 4
BACARDILIMON said:
See we agree.
NOTE 4
Click to expand...
Click to collapse
Not likely.
In any case, it failed again. The video he did gave me the exact same steps I followed elsewhere, and unsurprisingly, it failed with 'We can't communicate with Phone', after beginning the flash process. There is something else wrong here, though I'm not certain if the failing phone is at fault or the PC in question is causing the issue. To be crystal clear, the flash process starts, and then, at a random point during the flash, it completely stops, and Flashtool eventually gives up and throws the aforementioned error.
Any other ideas? If not, I'm going to have to try another PC to rule that out as the culprit. Sigh.
Mine gave the same error as well as couldn't communicate with server but the flash process continued running and the phone rebooted took about 3 minutes u learned not to touch any of the popups on the screen during flash and sorry I missed the part about no OS I thought you were booting to recovery... Driving while reading not the best idea
Toneman07 said:
Mine gave the same error as well as couldn't communicate with server but the flash process continued running and the phone rebooted took about 3 minutes u learned not to touch any of the popups on the screen during flash and sorry I missed the part about no OS I thought you were booting to recovery... Driving while reading not the best idea
Click to expand...
Click to collapse
Nope, the phone is definitely not doing anything - the usb animation on the G3 completely stops before Flashtool throws the error.
And damnit, quit reading while driving. You can do that later.
Moved the hdd Windows is installed on to another PC with a different chipset. After it updated drivers, I tried again. Flash proceeded partway, then died. Reset phone, Flashtool reststarted flash from scratch, flash died at 15%.
15% is interesting. While I've seen the flash die at various points, 15% is the one that was most often repeated. This tells me the failure follows the phone, not the PC - which makes sense, as the phone has a suspected RAM failure.
At this point, it appears that flashing this phone is impossible due to faulty hw. Hopefully TMO (and eventually, LG) will accept the faulty phone back with no OS, because there's no way an OS is being written to this device ever again.
Thank you for answering
yanowman said:
Thank you for answering
Click to expand...
Click to collapse
No problem. There's nothing I hate more than stumbling across a thread where the OP has the same problem I have, only to find it was never updated with the solution.
Good luck man let us know what tmobile says
This is my first post, so please forgive any mistakes I make with a post.
My wife's Galaxy Note 8.0 tablet was being stupid, it would refuse to properly use the internet from our Asus router, would connect but apps would insist there was no connection. Was getting tired of that crap so I decided to install a custom ROM, since samsung can be kind of jackasses abandoning most their devices after one major update, was only running Kitkat for crying out loud. I had done so before, but issues arouse. For one, I had great difficulty finding a proper TWRP for some stupid reason, NO ONE seamed to know where to get a well working version. I found one, but it messed everything up, it seems to work just fine but any ROM I install has massive issues with the Google apps, they crash eternally and continuously so I can do literally nothing, can't even get past first setup. I came across talk that it was old TWRP to blame, that it has issues with newer OS's like the lollipop I was trying to install, and FINALLY managed to find a newer version of TWRP, but freaking Odin keeps hanging on it's install, gets to "Nand write start" then stops doing anything. I have tried different cables as well as different computers, does jack crap so far to help. My backup I made in TWRP doesn't even work, when I restore the result is nothing but a boot loop. I am trying to find a stock os to restore it to (mostly) original condition, but it is absurdly difficult for some stupid reason to find, found one all in one exe that didn't work for a damn. I was hoping there might even be a way to install the newer TWRP from with TWRP itself. Can anyone help me with any part of this?
First things first. Calm down.
Do you have Samsung Smart Switch installed on your pc? If not, do so.
Connect your note 8.0 to your pc, select the 'more' button and then Emergency software recovery and initialization. Let that run is course. It can take a while.
See if that helps.
kge420 said:
First things first. Calm down.
Do you have Samsung Smart Switch installed on your pc? If not, do so.
Connect your note 8.0 to your pc, select the 'more' button and then Emergency software recovery and initialization. Let that run is course. It can take a while.
See if that helps.
Click to expand...
Click to collapse
Sorry, but you are going to have to be a little more specific. I installed Switch, but connecting an off device obviously does nothing, should I install and let it boot into a broken ROM again, where gapps crashes, and connect it then?
If your main isues are with GApps try clearing the cache in the play store app, check the date and time on your device.
I literally just got my Note 8 up and running after suffering these same issues you describe. My thread on this:
http://forum.xda-developers.com/galaxy-note-8-0/help/note-8-0-stuck-screen-t3218608
I'll try my best to help you. I received some good advice and I 'd like to help someone as a show of appreciation.
We'll get this straight!
Thanks, pretty much.
kge420 said:
If your main isues are with GApps try clearing the cache in the play store app, check the date and time on your device.
I literally just got my Note 8 up and running after suffering these same issues you describe. My thread on this:
http://forum.xda-developers.com/galaxy-note-8-0/help/note-8-0-stuck-screen-t3218608
I'll try my best to help you. I received some good advice and I 'd like to help someone as a show of appreciation.
We'll get this straight!
Click to expand...
Click to collapse
None of what you said really made sense, I could not get to ANYTHING AT ALL that was not Odin or TWRP. But that link you had gave me the name for the stock os, I searched that and flashed it and now everything is great. So thanks, sort of. You even mentioned that method not working for you I think in that thread, but it did for me, so yeah.
All good then.
So, my phone reset itself randomly today and I noticed it was unable to turn on Wi-Fi for some reason. I uninstalled an app I've had for a long time called Power Toggles as I know it also can turn on/off the Wi-Fi (to make sure the phone and it weren't fighting) and I got the idea to check the root using Root Checker. Turns out, it failed . . . So something funny is going on.
I have not knowingly taken any type of update but every once in a while, my phone has tried to update and then said it aborted it due to suspected root. Not sure if that's what happened this time around as it happened while it was in my pocket (or at least it was working before I put it away and then later on, it basically stopped working and just seems to continuously reboot for funsies).
I tried rooting my phone using Kingoroot, an LG one click method (both script and GUI) with no luck. I've never had trouble rooting my phone, especially with one click roots before! I reinstalled LG drivers, disabled and re-enabled USB debugger, switched between MTP and PTP connections, etc. I can't seem to get it to recognize the phone. When doing one root method though, it reminded me to accept the RSA fingerprint and I realized that my phone is not asking me for the RSA fingerprint for my computer. I even tried revoking previous fingerprints and no luck there either. So I'm not sure what might be repressing that option but I'm assuming that's the "root" of my rooting issue.
Anyway, does anyone know
a) why my phone would suddenly be acting this way (I think I read someone else had similar symptoms in one of the one click root forums. Tried searching for more mentions but the website seems to be halting and letting me know the issue has been sent to administrators or something to that effect).
b) how do I solve this?
Below is what I'm running:
Android Version
5.0.1
Kernal Version:
3.4.0
Build Number:
LRX21Y
Software Version:
D85021I
Security Software Version:
MDF v1.1 Release 2
I have a TWRP backup made from quite a while ago (possibly a year ago) so i can try and utilize that but I'm not sure if that will do me any good if I can't root my phone first. I don't want to do anything out of desperation that's going to put me into more trouble down the road. At least as of now, my phone boots up correctly (even if it does seem to reset fairly regularly and has a constant battery drain from trying to turn on the wifi).
Any help you guys can give me would be greatly appreciated. Hopefully, I won't just have to buy a new phone . . . Thanks in advance!
Turns out Bluetooth no longer works either. Just thought that might be worth mentioning.
http://forum.xda-developers.com/lg-g3/help/wi-fi-bluetooth-fm-radio-d855-t3284582 Old problem, not much that can be done :|
jbrookley said:
So, my phone reset itself randomly today and I noticed it was unable to turn on Wi-Fi for some reason. I uninstalled an app I've had for a long time called Power Toggles as I know it also can turn on/off the Wi-Fi (to make sure the phone and it weren't fighting) and I got the idea to check the root using Root Checker. Turns out, it failed . . . So something funny is going on.
I have not knowingly taken any type of update but every once in a while, my phone has tried to update and then said it aborted it due to suspected root. Not sure if that's what happened this time around as it happened while it was in my pocket (or at least it was working before I put it away and then later on, it basically stopped working and just seems to continuously reboot for funsies).
I tried rooting my phone using Kingoroot, an LG one click method (both script and GUI) with no luck. I've never had trouble rooting my phone, especially with one click roots before! I reinstalled LG drivers, disabled and re-enabled USB debugger, switched between MTP and PTP connections, etc. I can't seem to get it to recognize the phone. When doing one root method though, it reminded me to accept the RSA fingerprint and I realized that my phone is not asking me for the RSA fingerprint for my computer. I even tried revoking previous fingerprints and no luck there either. So I'm not sure what might be repressing that option but I'm assuming that's the "root" of my rooting issue.
Anyway, does anyone know
a) why my phone would suddenly be acting this way (I think I read someone else had similar symptoms in one of the one click root forums. Tried searching for more mentions but the website seems to be halting and letting me know the issue has been sent to administrators or something to that effect).
b) how do I solve this?
Below is what I'm running:
Android Version
5.0.1
Kernal Version:
3.4.0
Build Number:
LRX21Y
Software Version:
D85021I
Security Software Version:
MDF v1.1 Release 2
I have a TWRP backup made from quite a while ago (possibly a year ago) so i can try and utilize that but I'm not sure if that will do me any good if I can't root my phone first. I don't want to do anything out of desperation that's going to put me into more trouble down the road. At least as of now, my phone boots up correctly (even if it does seem to reset fairly regularly and has a constant battery drain from trying to turn on the wifi).
Any help you guys can give me would be greatly appreciated. Hopefully, I won't just have to buy a new phone . . . Thanks in advance!
Click to expand...
Click to collapse
Well ok, you have that TWRP backup, how about accessing TWRP?
Can you enter recovery?
Does it display your IMEI in system settings, what does it do when you try to enable wifi?
Can you make backup of your current ROM in TWRP, then try to restore the old one, try restoring only system partition if the backup was made on same Android Lollipop 5.0.1. ?
Well, I was able to get into recovery and run an old image but it appears to have the same issue. My IMEI is fine (I did a full backup including IMEI but it had a valid IMEI before as well) so that wasn't the issue. Looking at that other thread someone posted, it looks like my phone is just screwed and this is a well known issue. It looks like people were able to fix it by replacing the motherboard, which is obviously not an option for me. If that's the case, I'm guessing this is my first and last LG phone. I've never had this kind of issue with a Samsung. In fact, I'm now back on an old S4 until I can figure out what to do. Not sure what phone to get at this point.
Natus, to answer your question, the Wi-Fi icon just kinda goes in a loop like it's trying to start it up. Opening up the Wi-Fi menu has it say it's starting up the Wi-Fi but never gets there. Unfortunately, it eats up battery fast, heats it up quickly, and eventually restarts.
I'm open to any other ideas but I'm guessing it's a hardware problem at this point. Thanks for the info, everyone! I do appreciate the help!
If you have any suggestions for a new phone, I'm all ears. Trying to stay out of a payment plan so I'm looking at the Nexus 6P but I'm wondering if there's one coming down the pipeline I might want to hold off for. I'd rather buy directly from the manufacturer than go through AT&T, given the option. Might need to start a new thread for that one though . . . Thanks!
jbrookley said:
Well, I was able to get into recovery and run an old image but it appears to have the same issue. My IMEI is fine (I did a full backup including IMEI but it had a valid IMEI before as well) so that wasn't the issue. Looking at that other thread someone posted, it looks like my phone is just screwed and this is a well known issue. It looks like people were able to fix it by replacing the motherboard, which is obviously not an option for me. If that's the case, I'm guessing this is my first and last LG phone. I've never had this kind of issue with a Samsung. In fact, I'm now back on an old S4 until I can figure out what to do. Not sure what phone to get at this point.
Natus, to answer your question, the Wi-Fi icon just kinda goes in a loop like it's trying to start it up. Opening up the Wi-Fi menu has it say it's starting up the Wi-Fi but never gets there. Unfortunately, it eats up battery fast, heats it up quickly, and eventually restarts.
I'm open to any other ideas but I'm guessing it's a hardware problem at this point. Thanks for the info, everyone! I do appreciate the help!
If you have any suggestions for a new phone, I'm all ears. Trying to stay out of a payment plan so I'm looking at the Nexus 6P but I'm wondering if there's one coming down the pipeline I might want to hold off for. I'd rather buy directly from the manufacturer than go through AT&T, given the option. Might need to start a new thread for that one though . . . Thanks!
Click to expand...
Click to collapse
I'd wait for note 7 or even iphone 7 =]
My sw3 has been stuck on the 4 dots/symbols for some time now. I have tried XC (even though it ran with success, it did not fix the watch), by way of fastboot, adb and twrp I have run, installed, pushed various files such as recovery, roms, .simg, etc to no avail. I had a thread going on the 4 dots that describes each of these functions with the 4 dot thread title if you care to see what has been done and the results.
The last entry of that thread suggested there may be an issue with my partitions. So, I wondering if anyone knows either how to check/compare and better yet, repair if needed?
Edit: I found this post http://forum.xda-developers.com/smar...rsion-t2988087 and I was able to get the watch working again. I still cannot use XC to repair or update, but at least it is working with LP.
golfnut22 said:
My sw3 has been stuck on the 4 dots/symbols for some time now. I have tried XC (even though it ran with success, it did not fix the watch), by way of fastboot, adb and twrp I have run, installed, pushed various files such as recovery, roms, .simg, etc to no avail. I had a thread going on the 4 dots that describes each of these functions with the 4 dot thread title if you care to see what has been done and the results.
The last entry of that thread suggested there may be an issue with my partitions. So, I wondering if anyone knows either how to check/compare and better yet, repair if needed?
Edit: Edit: I found this post http://forum.xda-developers.com/smar...rsion-t2988087 and I was able to get the watch working again. I still cannot use XC to repair or update, but at least it is working with LP.
Click to expand...
Click to collapse
Same issue here
Hi,
I have the exact same issue with my sw3, stuck on the four symbols. Like you I managed to flash TWRP and mount the SWR50-LWX48P-repacked ROM. This doesn't do the trick unfortunately because firstly I cannot update the ROM and worst of all the watch will not connect to my smartphone. Like you I suspect there to be an issue with the partitions but I haven't got a clue really. Hope for some help on this.
baronimus said:
Hi,
I have the exact same issue with my sw3, stuck on the four symbols. Like you I managed to flash TWRP and mount the SWR50-LWX48P-repacked ROM. This doesn't do the trick unfortunately because firstly I cannot update the ROM and worst of all the watch will not connect to my smartphone. Like you I suspect there to be an issue with the partitions but I haven't got a clue really. Hope for some help on this.
Click to expand...
Click to collapse
Yes, I still have not been able to update to MM. Mine does connect to my smartphone with no issues. Although, the last time I did have an issue where it kept cycling and trying to connect to the internet via the phone. So, I went thru the steps again to basically get it back to the ROM you noted above and it is working. One thing I have noticed once I get it going with the steps I used, I cannot boot to twrp via fastboot. I have to go to XC and let it try and repair, which it says it does, but doesn't. I get the 4 dots again, and from there when I fastboot, I can fastboot twrp.img and adb push stuff to install. However, I have noticed that I need to use the flash commands and flash the .simg file noted in my thread in order for the above ROM to actually work. I also noticed when that ROM is installing, it does mention working on partitions...so, it must be doing something to some of them.
I would love to be able to get MM working on this, but I think I have run out of ROMs to try. I'm probably not sequencing something right, but have not clue as to what is wrong. I am an newbie at this.
If you get MM to finally update on your watch, it would be much appreciated if you would share your detailed process in achieving that success.
I started updating the phone to the Jan 2019 update from the Dec 2018 update (I just like having the latest updates) It rebooted into bootloader via ADB just fine. I then ran the flash all.bat without the -w so it wouldnt wipe the phone out completely. It started updating and rebooting just like normal after the bootloader and radio parts. It made it close to the end of the system update and did not reboot the phone. It went back to the bootloader which I thought was odd. Fastboot can no longer see the phone in Fastboot devices. When starting the phone it reboots back into bootloader saying load failed. It also will not boot into recovery (which I expected from the update and not getting to flash twrp back in yet) I have rebooted the phone and my computer as well. I tried my other phone to check the cable and it found it in ADB and Fastboot just fine. I do have the latest SDK installed. Any help would be greatly appreciated.
---Solution---
Chilipepprflea said:
I know this is probably too late for you guys, but maybe it will help someone else. Fastboot commands would result in "waiting on any device" and my Pixel 2 wouldn't boot out of the bootloader. I thought it was done for good based on this thread and others I've read...until I came across this Reddit https://www.reddit.com/r/GooglePixel/comments/b25nso/error_slot_unbootable_load_error/
I did what this guy did and held the power button (ended up being for a couple minutes in my case) and it vibrated and all is good again! adb recognized my phone and I was able to flash again.
Click to expand...
Click to collapse
You'll have to go back into bootloader and do a stock flash follow the steps on googles site. go back to 8.0 or whatever you were on before, make sure that boots up fine. You must not have had updated your sdk before trying to update to 9.0
I was going to just reflash everything but when I do fastboot devices its just blank as if the phone does not exist. Also the computer doesnt do its chime when I plug the USB in while its in bootloader. When the phone is off and I plug it in it shows the charging icon for a split second then boots into bootloader saying ERROR: Slot Unbootable: Load Error. If I try to do any commands in fastboot it just says "waiting for any device"
I was already on 9.0 and was just pushing the January security patch when it stopped near the end of the update. Now I can not get fastboot to even see the device.
Try removing all drivers and fastboot files on your pc. Sounds like you just flashed the wrong file. Were you rooted with magisk? or just on a stock rom. re download the full image and try and re flash. https://developers.google.com/android/images
Because of the slots (a and b) alot of people seem to have trouble flashing things. I have even messed things up as well. On the Pixel devices I havent been able to not go back into stock setups. Even if it took removing all files and starting over.
---------- Post added at 04:19 AM ---------- Previous post was at 04:18 AM ----------
I will keep checking back over here to see if you have any issues.
So I just tried what you had said. Deleted all the SDK files and uninstalled the drivers, rebooted computer and phone redownloaded everything and still can not find the phone via fastboot... magisk was installed but I was doing the full image install without the -w so it would not wipe. it was almost done with it and never actually booted into android it just stayed on the bootloader which I found strange. That is when I noticed that the phone could no longer be found via fastboot devices. I have tried different cords different ports and even a different computer and still have the same result. It did update the bootloader and radio portions of the update. I feel like if I can get fastboot to start working I can save this thing.
I got caught up with friends that came over. You have tried everything I would have tried. Which is good cause you seem to know what you are doing, but not good that it hasnt been resolved. Have you looked at this guide? https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
Coolpente said:
I started updating the phone to the Jan 2019 update from the Dec 2018 update (I just like having the latest updates) It rebooted into bootloader via ADB just fine. I then ran the flash all.bat without the -w so it wouldnt wipe the phone out completely. It started updating and rebooting just like normal after the bootloader and radio parts. It made it close to the end of the system update and did not reboot the phone. It went back to the bootloader which I thought was odd. Fastboot can no longer see the phone in Fastboot devices. When starting the phone it reboots back into bootloader saying load failed. It also will not boot into recovery (which I expected from the update and not getting to flash twrp back in yet) I have rebooted the phone and my computer as well. I tried my other phone to check the cable and it found it in ADB and Fastboot just fine. I do have the latest SDK installed. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Are you *sure* it will not boot to recovery? If you're not used to the stock recovery it can fool you. Many ppl see the dead android and stop there. If you can get into the stock recovery you can try sideloading an OTA via adb (which only works in recovery). I would also be trying different computers and cables. If you cannot use fastboot -and- you have no working recovery you might be dead in the water.
OMG @Coolpente!!!! THIS....HAPPENED...TO....ME!!!!
Holy crap! I can't believe this happened to someone else! I thought it was just me and my bad luck!
I literally was doing the same thing (only difference was on my gf's pixel 2 [walleye])! And those who have seen me around this forum the last year know that I am very knowledgeable and don't make the simple and "noob" mistakes! I've literally have helped and recovered people in this/our position -- so it is doubtful there was a amateur or novice mistake made in the updating process or "stone un-turned" in the recovery process!
So here is what happened to me, particularly, and my observations on it...
- When "crap hit the fan", it was very peculiar that fastboot would identify the phone's serial number as "??????????" (when running the command "fastboot devices"). Only after rebooting and disconnecting/reconnecting the usb cable did it (fastboot) simply just stop detecting. To make sure that my computer, usb port, cable, and fastboot is working correctly and able to process properly, I would make sure the fastboot process/server was not running, then I would actually run the command "fastboot getvar all", and as it would "would for device", I would plug in the phone, nothing would happen, then plug in my phone [taimen] (not my gf's walleye), and it would detect it and display all the pertinent information and device details, I would then unplug it from my phone, run the same getvar command, and lastly replug it into the phone (broken gf's walleye) with no detection or success.
- What's also interesting and of note is that when loading straight into the bootloader (via button combination), it displays no error in the list of device details. But when booting into the recovery (note: I, like the OP, had the TWRP custom recovery already flashed and installed) and also the system and/or from a power-off state, it states in red colored font and yellow background, "ERROR: Slot Unbootable: Load Error". Even more than that is when attempting to boot into Download mode, it states a different error (but in the same font style), "ERROR: Operation Denied"!
- I also attempted to manually change the slot in attempts to address the "slot unbootable..." "...load[ing] error", but -- due to either fastboot not detecting or the device not connecting properly I imagine -- without fastboot properly detecting, the commands wouldn't work and execute properly anyway. I've even taken steps further and attempted to format and custom "re-size" partitions. But, for the aforementioned reasons (presumably), it and attempts at commands like it wouldn't likely work and execute, again as previously reasoned. Also, in attempt to tackle the "slot" aspect of the issue, I tried Deuce's script; but as Deuce's script is, simply put, based off of the flash-all.bat that ends up being an advanced batch (pun intended) of commands that manually and individually flashes the stock images/partitions to the partitions of the device -- so, in essence, uses fastboot and since fastboot can't work.... I even found and attempted to use the (hardly heard of; at least to me) tool Skipsoft Android Toolkit (which looks genuinely super dooper awesome btw...)... all for naught :crying: ...
You know, after a year with the Pixel 2 (XL), and after coming back from messing my phone up (15+ times), and actually purely bricking it once (had to get it replaced), I always thought that, as long as one could access the device via the bootloader, one would always have hope (at least in the Pixel's case). So, it's curious but agonizingly ironic being able to access the bootloader (which was not the case in my one and only instance of bricking my device and having a completely "lost cause") just for me not to be able to do anything about it and/or fastboot to not be able to properly connect and send commands to it...
But to me and Coolpente (and anyone else who this may have happened to) I ultimately can't think of anything else that can be done at this point. To re-iterate, I/we had the most up-to-date platform-tools (r28.0.1), it has been proven that the usb cord, port, computer, and drivers are all working as I was able to get the "getvar all" command to work on another pixel mere seconds before attempting the same on this (broken) device, and even attempted all tools available...
Unfortunately, @Coolpente, it does look as if our phones are irrevocably "bricked" and it's all rather doomed and attempting to get it repaired/replaced by the manufacturer ("The Big G") is the only recourse we may have :crying::crying::crying:
I wrote this (very long) post in hopes of giving as much information and details as possible in the desperate hopes that any other solutions might be brought up...
simplepinoi177 said:
OMG @Coolpente!!!! THIS....HAPPENED...TO....ME!!!!
Holy crap! I can't believe this happened to someone else! I thought it was just me and my bad luck!
-- SNIP---
I wrote this (very long) post in hopes of giving as much information and details as possible in the desperate hopes that any other solutions might be brought up...
Click to expand...
Click to collapse
I am so glad I am not the only one that his has happened to! I have rooted several phones as well as almost bricking the one that ultimately bricked... (not up to date sdk tools) You have word for word the exact same thing that is happening to me. no recovery no booting and no download mode just the bootloader which is not found by fastboot. I thought at first it may have been the usb port in the phone disconnecting somehow but when plugging it in from a completely off state it does show the charging battery screen for a split second then boots into bootloader saying it can not load that slot. I am not very fluent in the disassembly of phones like this or I would check to see if the data parts of the USB port are not connected to the board.. It kills me that the phone is not even a year old and something like this would happen.. I have since gotten a replacement phone but I am very interested in seeing if there is a way to fix it in the near future outside of sending it in.
Coolpente said:
I am so glad I am not the only one that his has happened to! I have rooted several phones as well as almost bricking the one that ultimately bricked... (not up to date sdk tools) You have word for word the exact same thing that is happening to me. no recovery no booting and no download mode just the bootloader which is not found by fastboot. I thought at first it may have been the usb port in the phone disconnecting somehow but when plugging it in from a completely off state it does show the charging battery screen for a split second then boots into bootloader saying it can not load that slot. I am not very fluent in the disassembly of phones like this or I would check to see if the data parts of the USB port are not connected to the board.. It kills me that the phone is not even a year old and something like this would happen.. I have since gotten a replacement phone but I am very interested in seeing if there is a way to fix it in the near future outside of sending it in.
Click to expand...
Click to collapse
I know it is highly unlikely, but I'm hanging in there hoping for the same thing as well...
Yeah, it's troubling that this is can be happening coming from very "seasoned" users!
I was considering the same that it feels more like a hardware issue since everything seems to work on the computer end as well as everything working on another pixel device, BUT I can't see how a failed "fastboot" command and process can effect any kind of hardware or physical connections ("data parts")?!
If anything, I believe it has to do with the sequence of events of how things crapped out... I believe that, in some random manner, the bootloader -- which gets flashed and updated first; referencing the script in the flash-all.bat -- gets replaced, but isn't installed/initialized/"placed" properly -- but curiously enough, is installed "properly" enough that it can be re-entered after turning the device off -- that most everything works BUT the all important fastboot connection/interface/detection! That's why I attempted to manually flash the bootloader image ("fastboot flash bootloader bootloader.img"), but, "head-bangingly" poetic in its irony of course, fastboot is required to accomplish this ("this" being fixing freaking "fastboot"! :crying: )
I'm terrified to update my own Pixel at this point.
Unfortunately, this seems to have only been documented in our two cases (so far)...I wonder if it's even worth creating a Google support ticket in attempts to bring it up to them in hopes that they fix whatever might be causing this -- hopefully assisting and saving others from this disaster -- and/or even pull the update until it is stable (although, like I stated, it seems not a prevalent enough issue that many either have successfully updated via this image and process or most haven't brought it up anywhere) and/or keep it from happening in the next update.
In any case, here's hoping ("pray for the best, expect the worst" kind of scenario is most likely appropriate) any kind of solution materializes, or, at the very least, can be shown as a "word of warning" and caution about the (this, specifically) update....
simplepinoi177 said:
OMG @Coolpente!!!! THIS....HAPPENED...TO....ME!!!!
Holy crap! I can't believe this happened to someone else! I thought it was just me and my bad luck!
I literally was doing the same thing (only difference was on my gf's pixel 2 [walleye])!
Click to expand...
Click to collapse
Find a new girlfriend, your problem will be easily solved.
simplepinoi177 said:
I know it is highly unlikely, but I'm hanging in there hoping for the same thing as well...
Yeah, it's troubling that this is can be happening coming from very "seasoned" users!
I was considering the same that it feels more like a hardware issue since everything seems to work on the computer end as well as everything working on another pixel device, BUT I can't see how a failed "fastboot" command and process can effect any kind of hardware or physical connections ("data parts")?!
If anything, I believe it has to do with the sequence of events of how things crapped out... I believe that, in some random manner, the bootloader -- which gets flashed and updated first; referencing the script in the flash-all.bat -- gets replaced, but isn't installed/initialized/"placed" properly -- but curiously enough, is installed "properly" enough that it can be re-entered after turning the device off -- that most everything works BUT the all important fastboot connection/interface/detection! That's why I attempted to manually flash the bootloader image ("fastboot flash bootloader bootloader.img"), but, "head-bangingly" poetic in its irony of course, fastboot is required to accomplish this ("this" being fixing freaking "fastboot"! :crying: )
I'm terrified to update my own Pixel at this point.
Unfortunately, this seems to have only been documented in our two cases (so far)...I wonder if it's even worth creating a Google support ticket in attempts to bring it up to them in hopes that they fix whatever might be causing this -- hopefully assisting and saving others from this disaster -- and/or even pull the update until it is stable (although, like I stated, it seems not a prevalent enough issue that many either have successfully updated via this image and process or most haven't brought it up anywhere) and/or keep it from happening in the next update.
In any case, here's hoping ("pray for the best, expect the worst" kind of scenario is most likely appropriate) any kind of solution materializes, or, at the very least, can be shown as a "word of warning" and caution about the (this, specifically) update....
Click to expand...
Click to collapse
I have considered going to a custom rom and avoiding the stock rom completely... Which would avoid ever needing to use fastboot to update in the future.. but its to late for one phone but not to late for the other. I havent even looked into roms since CM broke down...
Coolpente said:
I have considered going to a custom rom and avoiding the stock rom completely... Which would avoid ever needing to use fastboot to update in the future.. but its to late for one phone but not to late for the other. I havent even looked into roms since CM broke down...
Click to expand...
Click to collapse
Yeah....but, if you think of it, I've been updating by way of Full Factory images via fastboot for over a year (14 months to be exact), so the last 13 times and 13 out of 14 times it worked perfectly....so, pure statistics, I wonder if swearing off fastboot forever is truly pertinent just yet...
Well, at least the pixel 2's been out for....14 months, apparently...so there seems to be a lot of good, stable custom ROMs that have been long in development to choose from, if anything... **~shrugs~**
simplepinoi177 said:
Yeah....but, if you think of it, I've been updating by way of Full Factory images via fastboot for over a year (14 months to be exact), so the last 13 times and 13 out of 14 times it worked perfectly....so, pure statistics, I wonder if swearing off fastboot forever is truly pertinent just yet...
Well, at least the pixel 2's been out for....14 months, apparently...so there seems to be a lot of good, stable custom ROMs that have been long in development to choose from, if anything... **~shrugs~**
Click to expand...
Click to collapse
As far as statistics are concerned yea I have been updating 2 pixels by full factory images for the last year and one has survived all 12 months while the other made it through 11 of 12. but in fear of bricking another pixel device knowing this could potentially happen again... it feels as if going to custom roms would for sure be the safest method and still keep root. Of course losing root and going pure stock would be 100% the best... I love having root and dont want to lose it.
Coolpente said:
As far as statistics are concerned yea I have been updating 2 pixels by full factory images for the last year and one has survived all 12 months while the other made it through 11 of 12. but in fear of bricking another pixel device knowing this could potentially happen again... it feels as if going to custom roms would for sure be the safest method and still keep root. Of course losing root and going pure stock would be 100% the best... I love having root and dont want to lose it.
Click to expand...
Click to collapse
Yeah, I see what you're saying and in the exact same boat (2 pixels, gf's is a walleye, mine's a taimen, both have been updated monthly with no issues or def bricking issues, so 14 of 14 and 13 of 14...)...
But I guess that's definitely one of the "safest" methods, just that support for ROMs come and go (hell, even one of the original custom kernels [Flash] is EOL)...but Pixel 2 is only a year "in" and Google will continue to support it for the foreseeable future so it may look like regular support for walleye/taimen-related mods will continue to get regular updates and support as well...
But still, as I enjoy our conversations, it also serves to "bump" this thread as well...
Anyone have any idea on how to reinstall bootloaders, switch slots, enter custom recovery, flash anything all without -- and this is key -- fastboot (because fastboot will not detect and connect with the device)?!?!
I just tried to update to Feb from Jan and this happened to me....
Anything I can do about it?
James1258 said:
I just tried to update to Feb from Jan and this happened to me....
Anything I can do about it?
Click to expand...
Click to collapse
Awww crap! Super sorry to hear that! As you can see, not a lot of ideas or thoughts were submitted, and haven't been in a long while, so there doesn't seem to be much/anything that can be done it seems...
If you truly have the exact same thing, then that means that the USB connection is not working, so, you're not able to get into the recovery nor able to run any commands, so the only recourse it seems me and @Coolpente is to contact Google and attempt at a RMA...
But, as this is a third instance -- there may be more; I'm convinced there are, they just have not spoken up here specifically -- I wonder if this is something to be brought up to Google Support (https://productforums.google.com/forum/#!forum/phone-by-google) and their support forums? I mean, although this might not be a widespread widely known issue, this issue does make the device completely unusable and able to be rescued! For me, that's a serious matter -- as most other issues you can learn to live with it (while still being able to use the device for the most part) and/or it's something that can be worked on, repaired, debugged, etc. -- that needs to be attended to, dealt with, or at the very least brought to their attention.
simplepinoi177 said:
Awww crap! Super sorry to hear that! As you can see, not a lot of ideas or thoughts were submitted, and haven't been in a long while, so there doesn't seem to be much/anything that can be done it seems...
If you truly have the exact same thing, then that means that the USB connection is not working, so, you're not able to get into the recovery nor able to run any commands, so the only recourse it seems me and @Coolpente is to contact Google and attempt at a RMA...
But, as this is a third instance -- there may be more; I'm convinced there are, they just have not spoken up here specifically -- I wonder if this is something to be brought up to Google Support (https://productforums.google.com/forum/#!forum/phone-by-google) and their support forums? I mean, although this might not be a widespread widely known issue, this issue does make the device completely unusable and able to be rescued! For me, that's a serious matter -- as most other issues you can learn to live with it (while still being able to use the device for the most part) and/or it's something that can be worked on, repaired, debugged, etc. -- that needs to be attended to, dealt with, or at the very least brought to their attention.
Click to expand...
Click to collapse
I just contacted Google for an RMA. Hope it doesn't occur on the phone that will be shipped to me. Now I am without a phone for a couple weeks...
James1258 said:
I just tried to update to Feb from Jan and this happened to me....
Anything I can do about it?
Click to expand...
Click to collapse
Did you also ran the flash all without - w?
Sent from my Pixel 2 XL using Tapatalk