I read Miui 13 is out for LISA. Has anyone received the update yet? For EEA its 13.0.1.0.SKOEUXM.
Not offered to me, dont see anything here https://xiaomifirmwareupdater.com/miui/lisa/
Are you sure your source isnt full of it?
Not offered to me neither.
Check miui downloader on playstore. Miui 13 available. Click your device then click mi pilot.
Dont see mi pilot.
Nothing for me too, i am on 12.5.8.
I can see it in mine. Try re installing.
I have download but can not install.
Hot-Proton said:
I have download but can not install.
Click to expand...
Click to collapse
Ya it says it needs twrp. Have not tried it yet tho.
I've got mine today. Looking good.
Although no new theme or wallpapers.
Got my device Yesterday, now Android 12, MIUI 13.0.5 ist installed
Just got updated to MIUI 13.0.5 too. Except the nr 13, I do not see much difference.
I have updated to MIUI 13.0.5.0. I have no big issues, but i noticed that Google Discover feed layout is changed (now is more ugly), and there is green dot near front facing camera when camera app is opened.
Works such much better then 12.0.5.8
Hi,
I've just install MIUI 13 on my 11 lite 5G NE, but i have a problem on dark mode, the "More dark mode options" does not show any applications.
And the system apps updater is on light mode.
I didn't have this problem on 12.5.8.
Can i downgrade to MIUI 12.5.8? How?
Thanks for your help.
MrDSM said:
Hi,
I've just install MIUI 13 on my 11 lite 5G NE, but i have a problem on dark mode, the "More dark mode options" does not show any applications.
And the system apps updater is on light mode.
I didn't have this problem on 12.5.8.
Can i downgrade to MIUI 12.5.8? How?
Thanks for your help.
Click to expand...
Click to collapse
If there wasn't anti-roll back in miui 13 then you can do it with xiaomi flash but you need to have unlocked bootloader to do this. You can check anti-rollback by connecting your phone to computer in fastboot and run this in cmd : fastboot getvar anti
If the result is 1 or larger then you can't. Anti-rollback version in miui 12.5.8 should be 0.
If i want to make the update by the downloaded 12.5.8 zip in "update parameter", it will work? Or this will brick the phone ?
When i want to run the cmd in Fastboot, it tells me "Fasboot" is not recognized as an internal command.
MrDSM said:
When i want to run the cmd in Fastboot, it tells me "Fasboot" is not recognized as an internal command.
Click to expand...
Click to collapse
you need to install adb drivers first.
link to download is here.
After that try run command again in the extracted folder.
Hi,
I managed to install adb drivers, and yes i have anti-rollback=1.
Related
Hi all,
Today, I installed fitwear onto my SW3. For those of you who don't know, fitwear is an alternative system designed and made by a Chinese company called Lianluo, here is their website: http://fitwear.lianluo.com/ . In this version (Android v5.1.1) I found, it supports English, in addition, it supports OTA upgrade. However, this system seems to be free from google services.
This system does not require Android Wear APP.
OTA upgrade requires an Android Phone.
I have attached the files that I used. It contains: (I DID NOT made any of these tools, I only did translation.)
Driver: install the common fastboot driver in FlashTool first.
CMD easy Flash Tool: I translated it into English.
recovery: unknown purposes.
fitwear: v1.0, can be upgraded to v1.2 via OTA. (Build 20170118)
Android Wear (unknown version): I did not roll back to AW and I haven't check the version.
Orignial Chinese tutorial and flash_chs.bat: Read it if you can.
Installation Steps:
Install Flashtool driver from FLASHTOOL and the driver provided.
Extract the zip and run flash.bat (admin not needed).
Unlock your watch using the cmd if you haven't.
Flash Fitwear.
Reboot to fitwear.
Download the fitwear app onto your phone and connect to watch.
Link: https://drive.google.com/file/d/0B9OX6FDB6BzZaUlaYjlhSUVEdTg/view?usp=sharing
Link for v1.2 (by hardy272): https://drive.google.com/file/d/0B3t...ew?usp=sharing
Note: OTA upgrade needs the watch to be connected to some WIFI.
Disclaimer: By doing this you void your warrenty and I don't take any responsibility if your brick your device.
Do not distruibute!!! This is not thoroughly tested.
Reserved
I OTA upgraded to v1.2, nothing major changed, and I couldn't find a changelog. It seems that the watch would download something onto the phone to do the OTA upgrade, and I am wondering how to extract that out, or how to dump the entire system. Any help would be appreciated.
The battery seems to be nice, a lot of Chinese users reported very good battery usage. I guess that is due to the absence of Google Services.
I also noticed that OTA probably won't work with iOS.
Pictures:
Where did you find the rom for the SW3? On the downloads page of the website it allows me to download only the moto 360 one.
NicoGig said:
Where did you find the rom for the SW3? On the downloads page of the website it allows me to download only the moto 360 one.
Click to expand...
Click to collapse
On the famous Chinese version of Reddit: Baidu Tieba.
Link: https://tieba.baidu.com/p/4857846448
can u put music using google play or just connecting to the computer?
Looks like that the app is only in chinese https://itunes.apple.com/es/app/fitwear/id1078127859?mt=8
13im6b said:
can u put music using google play or just connecting to the computer?
Looks like that the app is only in chinese https://itunes.apple.com/es/app/fitwear/id1078127859?mt=8
Click to expand...
Click to collapse
On the change log, it says on version v1.9, they added English support. That APP works the same way as the Android Wear APP. You still have to play music on your phone, and on the watch you can control it.
some pic please, we wanna see the differences
dverbame said:
some pic please, we wanna see the differences
Click to expand...
Click to collapse
Will do on weekends! Drastically different from Android Wear.
Nice
there are to much bugs
Life4Play said:
there are to much bugs
Click to expand...
Click to collapse
Just off the basic features, I didn't encounter any. I will report back after OTA on weekends.
Fit Wear version 1.0 ios
I dont know why but with iPhone and The app i cant do Software updates. I cant open the dialer, birdie wear and The compass. Is it in android also?
Life4Play said:
I dont know why but with iPhone and The app i cant do Software updates. I cant open the dialer, birdie wear and The compass. Is it in android also?
Click to expand...
Click to collapse
I will try on weekends when I go back, I don't wear the SW3 now.
WORKING
I paired it with my android tablet and now it's working. Nice job!!!!!
can you post a link to directly download the 1,2 update as my internet is bad and i can't keep my watch connected to the wifi for long time
Here you Find some Pictures
https://forum.xda-developers.com/smartwatch-3/general/rom-fitwear-custom-rom-sony-smartwatch-3-t3589085
Life4Play said:
Here you Find some Pictures
https://forum.xda-developers.com/sm...fitwear-custom-rom-sony-smartwatch-3-t3589085
Click to expand...
Click to collapse
At least put in the orginial link ... What you did is bad.
iSpammer said:
can you post a link to directly download the 1,2 update as my internet is bad and i can't keep my watch connected to the wifi for long time
Click to expand...
Click to collapse
I have been trying to do that as well, I will dump one out during weekend.
Life4Play said:
I dont know why but with iPhone and The app i cant do Software updates. I cant open the dialer, birdie wear and The compass. Is it in android also?
Click to expand...
Click to collapse
I can confirm that the OTA does not work with iOS.
When i connect the watch with my pc the install script wont recognize the watch, and if i look in the device manager the watch is named tetra and has a yellow triangle above its icon.
The weird thing is i can reboot the watch via adb, so atleast the adb drivers must be ok. The watch itself is already rooted and has twrp on it, but i unlocked and installed twrp with linux because there the watch is fully functional ind fastboot mode.
So has anyone a solution for this, beside of installing various adb drivers or something like that. (and yes i tried mostly of them with no happy end, and even the flashtool drivers didnt work)
K4Y3R said:
When i connect the watch with my pc the install script wont recognize the watch, and if i look in the device manager the watch is named tetra and has a yellow triangle above its icon.
The weird thing is i can reboot the watch via adb, so atleast the adb drivers must be ok. The watch itself is already rooted and has twrp on it, but i unlocked and installed twrp with linux because there the watch is fully functional ind fastboot mode.
So has anyone a solution for this, beside of installing various adb drivers or something like that. (and yes i tried mostly of them with no happy end, and even the flashtool drivers didnt work)
Click to expand...
Click to collapse
You'll have to do this, to get Fastboot working:
Right-click the tetra item, and choose Update Driver.
Browse my computer for driver software.
Let me pick from a list of available driver on my computer.
Manufacturer: Google
Model: Bootloader
Next
Confirm
Profit?
Hopefully I didn't miss a step somewhere in there.
I just finished setting it up, and will report back my experience, after I get to play with it a little more.
How can I enable Camera 2 API Eu rom Mi max3 MIUI11 ANDROID 10?
I have enabled but no one camera opens
Flash this with TRWP.
Hello, I have installed the .Zip and I have used GCamator and it has not worked for me.I am with xiaomiEU 9.12.6 greetings
No one gcam works we have to wait
@millie said:
Flash this with TRWP.
Click to expand...
Click to collapse
flashed this and none of 10 different gcams worked. (https://www.celsoazevedo.com/files/android/google-camera/dev-suggested/)
Hey, I enabled hal3 but my whatsapp camera stopped working. And I couldn't take back hal3 couldn't disable it. I tried everything in build.prop. Can you help?
Another desperate user looking for a solution..
TRWP camera 2 api for eu.9.12.12 Pls thankyou
@millie said:
Flash this with TRWP.
Click to expand...
Click to collapse
TRWP camera 2 api for eu.9.12.12 Pls
thankyou
Omg i feel that my phone is really incomplete. What is the situation of camera2api on android 10 Q?
Mangineet said:
Omg i feel that my phone is really incomplete. What is the situation of camera2api on android 10 Q?
Click to expand...
Click to collapse
nothing for now.
How have you enabled HAL3?
I tried TWRP terminal, TWRP File manager, Magisk root and several apps to enable it with no success like BuildProp, Root Explorer and so on.
Every time I edit build.prop it is reverted to original values.
I have been able to even downloaded to my PC and the values are changed but after restarting or after changing the folder the file is reverted to its original values.
Thanks
nokiagye said:
I have enabled but no one camera opens
Click to expand...
Click to collapse
Same problem with me... [emoji17]
Sent from my MI MAX 3 using Tapatalk
Give up and using Android 9.
why do other android 10 devices have it tho? is it just a lack of developers for the max 3? I mean we had it already so technically it should be possible
I think some module in the Android 10 on the Mi max 3 are missing ,that why we couldn't have Camera 2 Api is enable... wish we could have a patch to add the folders and files we need to add the option . Like other we can't add some values in the build.prop ,it's restore to the original value .
Gcam works on gsi with a10 vendor, so it's something messed up in system
TheGed129 said:
Hey, I enabled hal3 but my whatsapp camera stopped working. And I couldn't take back hal3 couldn't disable it. I tried everything in build.prop. Can you help?
Click to expand...
Click to collapse
How has you enabled it?
I tried Magisk and HiddenProps config modules with no success.
I'm currently using MIMAX3Global_V11.0.1.0.QEDMIXM.
Thanks
I have managed to enable camera2api, however some library is missing and no camera app seems to work, not even OpenCamera app. The steps are provieded, however beware that THEY WILL BREAK ANDROID OTA UPDATES - You will have to flash everything from fastboot to unroot and restore OTA before further firmware updates.
If someone has libraries/apk to provide I'll be happy to test!
Done on: MIMAX3Global_V11.0.1.0.QEDMIXM
The steps for rooting are following:
fastboot boot orange-fox-recovery-10.1.img (recovery.img file)
install latest magisk zip from magiskmanager[dot]com (roughly 5.7MB Download)
reboot
open magisk manager, the following steps are done on the start screen of magisk manager
uninstall -> Restore images.
Advanced, uncheck Preserve AVB 2.0/dm-verify
Install/update magisk again, but from from inside magisk manager
reboot
add 'persist.vendor.camera.HAL3.enabled=1' and 'persist.camera.HAL3.enabled=1' to /system/buld.prop
reboot
Did you try GCam and if with the good version if it's working?
Android 10 BETA WW
Special thanks as always to Vietnam ROG II Grp. They do amazing work.
Links removed due to request
Rename the downloaded file to UL-ASUS_I001_1-ASUS-16.0631.1912.22-1.1.227-user.zip then put on root of internal storage and restart.
Root & Bootstock for 1912.22 ANDROID 10 BETA
https://mega.nz/#!hxJGCQpT!6xU71ihzA1cA5JLDB_hMMJNg5iHt80FmOf6z8Hrb7gA
Use at your own risk, do not raise issues on Zentalk forums.
So far user feedback has been positive.
Please let us know your experiences.
Current known issues (some bad English here!):
When in the game scenario and answer the phone call, user will not hear the sound and cut off the call after 30 seconds later.
Can not open the icon manager and showing "System UI has stopped"
When you install Avast.apk don't have any scan notice.
Working with twinview dock and open one of a app on the phone side then press twinview side panel recent key. The phone side will back home screen.
When using DT Dock or twinview or Pro dock to play Netflix will keep portrait mode and only show subtitle.
Any bugs?
Link root from telegram
Anyone tried it? If yes can post pictures thanks
Successfully update to Android 10 beta with magisk installed but now I am without TWRP. Tried flash TWRP with adb but it reboot to bootloader every time. Maybe TWRP must be updated for Android.
This is failing for me. Gets to 2% then fails. I'm on Rooted 128 GB Tecent with WW ROM, fingerprint is changed to WW.
xbamaris1` said:
This is failing for me. Gets to 2% then fails. I'm on Rooted 128 GB Tecent with WW ROM, fingerprint is changed to WW.
Click to expand...
Click to collapse
If you're rooted then you probably need to flash it manually.
tsoureki said:
Successfully update to Android 10 beta with magisk installed but now I am without TWRP. Tried flash TWRP with adb but it reboot to bootloader every time. Maybe TWRP must be updated for Android.
Click to expand...
Click to collapse
Step for update without lost root sir?
If you are rooted on latest Android 9 you need to go in magisk, press uninstall and restore images. Then you can apply the beta 10 ota. For root flash on adb the modified boot image from op
Does anyone have the Android 10 beta full RAW firmware ???
Hello, if anyone has access to the full Android 10 beta RAW firmware, please share it with us. Thanks !!!
Wow it's amazing. The red tint gone and it's way too smooth
It seems this has also broken the ability to enable VoLTE (*#*#4636*#*#) greys out the options but they do show up in the Settings menus. So not sure what that means?
EDIT: Ignore, its because the profile set in PDC was reset as someone else has pointed out. I JUST got VOLTE to work again after working with AT&T to get a provisioning error resolved (this was on their end, but probably because I was swapping SIMs between phones for testing)
Im going to let this settle a little bit before I try upgrading again to this (I downgraded back to 9 in fear that VOLTE wasnt going to work again)
Gpay is not working
Is this WW or CN beta????
cheetah2k said:
Is this WW or CN beta????
Click to expand...
Click to collapse
When you download zip its named WW.
CTS doesn't pass on this version. Hence done apps like gpay may not work
I'm not sure what I'm doing wrong but as soon as I tap update it instantly just says failed. I am on ww rom ww fingerprint and have twrp.
Hello
What is the difference between a version and the orange star?
candiesdoodle said:
CTS doesn't pass on this version. Hence done apps like gpay may not work
Click to expand...
Click to collapse
Do you know if this version will keep getting OTA?
lol cloud1 you just posted without giving credit to the owner from telegram vietnam group. it is like u stealing their work. now they just informed they will not post any update anymore in that group.
If you want to repost this internal OTA to other websites (other than XDA itself), please ask me for permission, thanks.
Click to expand...
Click to collapse
To users who have installed this internal build, please share your experience report here if you're willing to, thanks.
If HMD will push Android 10 officially, you can install it under ADB sideload easily and link will be posted here.
Internal build version: A1N-5060-0-00WW-B01
It will be updated from: A1N-414K-0-00WW-B01, which is unreleased January 2020 Security Update.
Let me tell you how to verify:
1. Dial *#*#227#*#* to check current Version. If older than A1N-414J-0-00WW-B03, update to 414J before proceed. (Alternately, dial *#*#7837#*#* to check, proceed if displays 00WW_4_14J-B03)
FYI, 414J is December 2019 Security Update.
Alternately, you can use command "fastboot oem getversions" under fastboot mode / Download mode to check current firmware version.
2. Install A1N-414K-0-00WW-B01-414J-0-00WW-B03-update.zip with adb sideload under recovery.
3. Reboot to normal OS and recovery again - it's not over yet.
4. Install A1N-5060-0-00WW-B01-414K-0-00WW-B01-update.zip with adb sideload under recovery.
5. Reboot your phone.
That's it.
If Android 10 official update pushed publicly, link will be updated here.
Download link:
To prevent throttle error, I didn't upload them to Google Drive or other cloud storages. Sorry for inconvenience.
https://www.androidfilehost.com/?w=files&flid=303427
Just perfect for me ! ?
Thanks !
edit: but gcam doesn't work anymore, I tested several versions ...
How to revert to android 9, please ?
Can this work on TA 1004?
christophebeuvry said:
Just perfect for me !
Thanks !
edit: but gcam doesn't work anymore, I tested several versions ...
How to revert to android 9, please ?
Click to expand...
Click to collapse
Can you please list down what all works and what doesn't? The phone is kind of my daily driver.
gcam does not work
nokia camera also bug but works
some lags and restart of the interface
To subscribers:
New internal packages updated!
Existing 5060 users may apply to 5100 by installing these 4 packages:
A1N-5070-0-00WW-B01-5060-0-00WW-B01-update.zip
A1N-5080-0-00WW-B01-5070-0-00WW-B01-update.zip
A1N-5090-0-00WW-B01-5080-0-00WW-B01-update.zip
A1N-5100-0-00WW-B01-5090-0-00WW-B01-update.zip
New comers with A1N-414L-0-00WW-B01 installed (can be acknowledged by dialing *#*#227#*#* or *#*#7837#*#*) can apply this update directly:
A1N-5100-0-00WW-B01-414L-0-00WW-B01-update.zip
And for enthusiasts who're interested with A1N-5100 full dump and would like to port that to original Nokia 8, I will upload that later.
Any update on the stability of this build? I want to test it but I use this phone as my secondary.
Thank you, hikari_calyx. ?
hikari_calyx said:
To subscribers:
New internal packages updated!
Existing 5060 users may apply to 5100 by installing these 4 packages:
A1N-5070-0-00WW-B01-5060-0-00WW-B01-update.zip
A1N-5080-0-00WW-B01-5070-0-00WW-B01-update.zip
A1N-5090-0-00WW-B01-5080-0-00WW-B01-update.zip
A1N-5100-0-00WW-B01-5090-0-00WW-B01-update.zip
New comers with A1N-414L-0-00WW-B01 installed (can be acknowledged by dialing *#*#227#*#* or *#*#7837#*#*) can apply this update directly:
A1N-5100-0-00WW-B01-414L-0-00WW-B01-update.zip
And for enthusiasts who're interested with A1N-5100 full dump and would like to port that to original Nokia 8, I will upload that later.
Click to expand...
Click to collapse
Can it work in TA- 1004? I'm waitting android 10 in Nokia 8 Thank kiu so much
Hi, I installed Android 10 on my Nokia 8 sirocco and since then, impossible to make gcam work. I have tried many versions but the application closes directly. Gcam worked perfectly on android 9. Do you have any solutions? Thank you.
Hey is it possible to install this on Nokia 8(TA-1004)?
To experienced developers:
Here's the full partition dump of Android 10 for A1N.
https://www.androidfilehost.com/?fid=4349826312261769554
If you'd like to port this to Nokia 8 (NB1, TA1004/1012/1052), now it's your chance.
Note this cannot be flashed to Nokia 8 NB1 directly.
To subscriber of this topic:
Nokia 8 Sirocco just got Android 10 official update.
If you have installed A1N-5120-0-00WW-B01 build (dial *#*#7837#*#* and output might be 00WW_5_120-B01), then it's same to official build and enjoy it.
We're fetching full OTA link and update soon.
Ok,
Because I was tired of waiting for Nokia to send the OTA update to my phone, I did this manually on a device that was running the latest March security patch and Android 9 using ADB and the A1N-5120-0-00WW-B01-414M-0-00WW-B01-update.zip package.
Follow the below guide if you want to update your device as well:
- dial *#*#7837#*#* and check that software is 414m
- download adb and fastboot from Google official site ( https://dl.google.com/android/repository/platform-tools-latest-windows.zip )
- download the update ( https://androidfilehost.com/?fid=4349826312261750327 )
- reboot the phone in recovery mode and go to Apply update to ADB ( guide how to reboot to recovery: https://www.hardreset.info/devices/nokia/nokia-8-sirocco/recovery-mode/ )
- placed all the above files ( firmware and google adb abd fastboot ) in the same folder open a CMD window and use the following command: ADB sideload A1N-5120-0-00WW-B01-414M-0-00WW-B01-update.zip
- wait for the update to finish, select reboot system now and reboot the phone.
Voilla, you are running the latest Android.
Things noticed after the update:
- phone feels a little bit snappier
- interface is the same, minor icon changes bug generally is the same
- has android 10 gesture navigation which does not work with a third party launcher
To subscribers of this topic:
Here's the full OTA link of A1N-5120 build.
https://android.googleapis.com/pack.../69b78c6f6a866f314a3b50e7ac88cd10e94233e7.zip
Hi!
Can you tell me how I can flash the latest full OTA of A1N-5120 build? I'm already on this update, but my phone is fully buggy after the official OTA update. I make a factory reset with clearing cache and some other folders by boot menu and I think I was delete something important. Get me advise, please! Thanks!
rudeboy1988 said:
Hi!
Can you tell me how I can flash the latest full OTA of A1N-5120 build? I'm already on this update, but my phone is fully buggy after the official OTA update. I make a factory reset with clearing cache and some other folders by boot menu and I think I was delete something important. Get me advise, please! Thanks!
Click to expand...
Click to collapse
I also have some problems with the phone running the latest OTA and also want to flash the latest OTA from file because neither factory reset from Settings nor from Recovery menu didn't help.
I've downloaded the file from https://android.googleapis.com/packages/ota-api/nokia_a1nsprout_avenger00ww/69b78c6f6a866f314a3b50e7ac88cd10e94233e7.zip, then copied it to the root of my Sirocco and dialed *#*#874#*#* but that didn't work for me.
I read that the file should have correct name - may be that is the problem?
What is the correct name for file so that it could be accepted as an update by the phone already running the same OTA?
So, if you have a Honor JSN-AL00 or a JSN-AL00a then you should've came across a problem were you were stuck on EMUI 8.2 and isn't able to upgrade your software and today I have found a solution for this irritating problem, First you should head to the settings on EMUI 8.2, then head to Applications, then you will find Three dot icon next navigate through then click Show System Processes, After that type Google in the search and uninstall anything that has google in it's name, then restart your phone and check for Software updates and you should receive the updates.
Keep updating your device until you reach to EMUI 9.1.0.215 then stop updating the device then follow the Video while being on EMUI 9.1.0.215
https://www.youtube.com/watch?v=Bm1FggPu-Zs
Then after you have got the GMS apps working fine on EMUI 9.1, you can continue the updates until you reach to EMUI 10.
PS: I have tried this method myself and it works flawlessly, so make sure you follow each step mentioned above and if you face any problems during the process, make sure to reply down and I'll reply to you.
Confirmed! Bravo Maestro!!! THX!
I am sorry I didn't understand. How did you get to the screen where you can see system processes?
heos98 said:
I am sorry I didn't understand. How did you get to the screen where you can see system processes?
Click to expand...
Click to collapse
Basically on EMUI 8, head over to the settings app, then Applications then click on the three dots then Show system proceeses then use the search bar and type google then uninstall any app that has google in its name and restart your phone
Hi, I managed to do it. Thank you very much everybody. This is working!
Thanks, I got GMS working with EMUI 9.1 with your guide, and am (slowly) updating to EMUI 10. It's important to that you stop at 9.1.0.215 before installing GMS, a casual search online shows that the method may fail for 9.1.0.219+
Thanks borden toi saved my life!
heos98 said:
Hi, I managed to do it. Thank you very much everybody. This is working!
Click to expand...
Click to collapse
martianunlimited said:
Thanks, I got GMS working with EMUI 9.1 with your guide, and am (slowly) updating to EMUI 10. It's important to that you stop at 9.1.0.215 before installing GMS, a casual search online shows that the method may fail for 9.1.0.219+
Click to expand...
Click to collapse
I got the fail for 9.1.0.219 any solution to fix?
Khroda said:
I got the fail for 9.1.0.219 any solution to fix?
Click to expand...
Click to collapse
I mentioned that you gotta downgrade from 9.1 by using Hisuit then try the method and it should work.
Borden666 said:
I mentioned that you gotta downgrade from 9.1 by using Hisuit then try the method and it should work.
Click to expand...
Click to collapse
i dowgrade to 217 and reupdate?
Khroda said:
i dowgrade to 217 and reupdate?
Click to expand...
Click to collapse
Downgrade to 9.1.0.215 then install google as mentioned then reupdate
how do i unzip the first thing i gotta download
the last version i can install its 9.1.0.219 have i done something wrong?
bandsville said:
the last version i can install its 9.1.0.219 have i done something wrong?
Click to expand...
Click to collapse
Me too, no android 10, can somebody help?
Edit: after 2 hours the update appeared, succesfully installed emui 10 with gms!
failed
My honor 8x can not install gms successful
Borden666 said:
I mentioned that you gotta downgrade from 9.1 by using Hisuit then try the method and it should work.
Click to expand...
Click to collapse
I need help on how to downgrade from 219 to 215.
PS: I managed to sort it out. Hisuite on my laptop wasn't detecting the phone had to use a desktop PC and i was able to downgrade to 9.1.0.176 then upgrade all the way to 9.1.0.215 then had to factory reset then i managed to install GMS and all is working. Then i upgraded to Android 10 with GMS still working without any issues
Borden666 said:
So, if you have a Honor JSN-AL00 or a JSN-AL00a then you should've came across a problem were you were stuck on EMUI 8.2 and isn't able to upgrade your software and today I have found a solution for this irritating problem, First you should head to the settings on EMUI 8.2, then head to Applications, then you will find Three dot icon next navigate through then click Show System Processes, After that type Google in the search and uninstall anything that has google in it's name, then restart your phone and check for Software updates and you should receive the updates.
Keep updating your device until you reach to EMUI 9.1.0.215 then stop updating the device then follow the Video while being on EMUI 9.1.0.215
https://www.youtube.com/watch?v=Bm1FggPu-Zs
Then after you have got the GMS apps working fine on EMUI 9.1, you can continue the updates until you reach to EMUI 10.
PS: I have tried this method myself and it works flawlessly, so make sure you follow each step mentioned above and if you face any problems during the process, make sure to reply down and I'll reply to you.
Click to expand...
Click to collapse
Before reading this post I tried to downgrade and I was successful from emui 10 to 91. however I was unable to install GSM and tried to go back to 8.2 and even hisuite doing the update I downloaded by the firmware finder I have brick problem the report now and ask if you can give me some guidance, thankful.
Hello, I'm common but I have a little knowledge, and I need to save my honor 8x China (JSN-AL00a) that only appears in the edl testpoint, this I say because it appears in the Windows 10 device manager as (HUAWEI USB COM 1.0 ), I don't have a dongle at all, I would like to know if I could fix it, is there any software that can do for edl point without dongle? Honor 8x kirin 710. thaks
Confirmed it is working on my Honor 8x Jsn-al00. I followed the instructions and updated until 9.1.0.215 then followed the Hisuite section of the installation. Can anyone confirm if it is safe to update normally from 9.1.0.215 to newer builds? Will gms still function?
It Works man, thanks a lot. I had waiting for that a long long time. Thanks...:good::good::good:
Hi guys,
I have got a Honor 8x Jsn-al00a running EMUI10 and want to roll it back to 9.1.0.215 to get google apps installed but my hisuite shows only the 9.1.0.219 version.
How did you manage to get it available?
Does anyone have a back up to be used as restore image ?
Thanks