Develop Bugs

Connecting USB Flash Drive to Touch

Is it possible to connect a USB Flash Drive to Touch. I want to use USB cable extender to connect the Flash Drive. Does WM6 recognize the USB Flash Drives or not?

it's a little more in depth than a cable, as yet, I have not seen anyone who has figured it out. We are not sure if the drivers for host capability exist, and you will need a speacial cable with all kinds of pulldown resistors and whatnot in order for the device to get power.

no it's the hardware usbchip which dont support it
no work around

Kinda makes me wonder why no one has come up with a small battery powered bluetooth hard drive.. That would be pretty sweet..

Seems like if it was battery powered... it would be dead in five minutes lol

They do make 'em!
http://www.engadget.com/2007/01/30/seagate-unveils-d-a-v-e-drive-with-bluetooth-and-wifi/

Audi2Audi said:
They do make 'em!
http://www.engadget.com/2007/01/30/seagate-unveils-d-a-v-e-drive-with-bluetooth-and-wifi/
Click to expand...
Click to collapse
I spoke to Seagate apparently they will only be selling this through the OEM channel. not directly to consumers. So I don't who would carry this and if we can buy it.
But they go upto 60GB.
Anyone knows where we can get it?
http://www.seagate.com/www/en-us/products/consumer_electronics/DAVE/

a harddrive no but a flash drive should be perfectly within the usb spec this phone is built to it would just be a matter of proper drivers which probably are out their considering their are printer drivers which are much more compicated and no resistors would be required usb is a serial bidirectional interface not like cat5 their is no hardware crossover or anything required

SultanH said:
I spoke to Seagate apparently they will only be selling this through the OEM channel. not directly to consumers. So I don't who would carry this and if we can buy it.
But they go upto 60GB.
Anyone knows where we can get it?
http://www.seagate.com/www/en-us/products/consumer_electronics/DAVE/
Click to expand...
Click to collapse
Is there a way of accessing media files from your pc via internet and to access and use only needed files on my pda. It has to be the internet because the phone does not have wi-fi. I have a Sprint Touch. Storage has ultimatly been my problem. The bluetooth hdd sounded pretty good for my use but its not available. thanks... noob

cdred said:
Is there a way of accessing media files from your pc via internet and to access and use only needed files on my pda. It has to be the internet because the phone does not have wi-fi. I have a Sprint Touch. Storage has ultimatly been my problem. The bluetooth hdd sounded pretty good for my use but its not available. thanks... noob
Click to expand...
Click to collapse
I assume from your explanation that you are trying to use this when you are home? I would just use the Bluetooth FTP or Bluetooth browser and access the PC that way instead of using airtime.
If you want to use it while you are out then there is a device called Slingbox try googling that.
Good luck.

Rudegar said:
no it's the hardware usbchip which dont support it
no work around
Click to expand...
Click to collapse
I call bull**** on that one!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The MSM 7500 is the chip found in the Vogue...check out connectivity...it lists the port as USB OTG.... short for USB on the Go....which means it has limited hosting capabilities.
Even though Windows does support USB OTG Mass Storage, the problem is that the Vogue is not transmitting enough power via the USB port, which according to USB OTG regulations is OK. Which means you have to use specific selfpowered USB devices (most likely labeled as USB OTG compatible), or provide the power by yourself (splicing cable and adding correct AC adapter...).

HTC DOck
how 'bout this one:
http://www.expansys.com/htc/p_htc_item.aspx?i=145164
kinda big, and I think but here's the info:
Description
Keep the HTC Advantage at hand on a desk and at an ideal viewing angle. The docking station extends the peripheral connectivty of the Advantage and includes:
- A/V interface: VGA (15pin) port, Video out port, S-Video (4 pin) port, 3.5mm audio jack
- Charging & syncing interface: miniUSB port for power charging and synchronization, 2 x USB standard A female port (USB Host), 2nd battery charging slot
- LEDs indicators – 2nd battery, power & sync
Technical Details
(none available)
I'm experimenting with a powered USB Hub... who knows...

I want to buy an HTC Diamond and if it's possible I would use the mini usb port in it like a "host"...so (from the bottom of my lack of knowledge) I'll try to help this "project"...
If I'm not wrong USB On-The-Go is just a "chipset protocol", a feature of its and no more...the only two hdw thinks that a device must have to use it is
1) an AB type port usb (or mini usb as most pdas)
2) a circuit scheme that is able to send 5v to the pin of the port used during the "host mode"
Moreover, on the sfw side, it's necessary to have drivers that recognize and organize the host function of the port...
It's all right?
If I centered the situation I think that the only problem is the lack of 5v power to send to the pin, that's right?
In this case...why don't look (and copy) this?
Then, about the drivers matter, i think is sufficient a look to the others (a few I know) WM devices that already have a native usb host functionality...
I'm sorry if I said a lot of stupid thinks but I said before I just tried to gave an help.
PS: sorry for my english too and (because of this is my first message) Hi all!!!

cdred said:
Is there a way of accessing media files from your pc via internet and to access and use only needed files on my pda. It has to be the internet because the phone does not have wi-fi. I have a Sprint Touch. Storage has ultimatly been my problem. The bluetooth hdd sounded pretty good for my use but its not available. thanks... noob
Click to expand...
Click to collapse
www.orb.com will do what you want...you don't need a tv tuner to make use of its other capabilities.

Ok, as a lot of you maybe still know NEO1973 will have a USB host functionallity...
Infact it has a USB otg port and it will selled with this option already included.
About that I've found this page: a complete explaination to activate the host function of the port...it could be of any help?
http://wiki.openmoko.org/wiki/Neo1973_USB_host

2 quick points:
@dave68 - all of the pieces needed to make a USB flash drive work with the Toshiba E804 PPC (WM2003) already exist - including drivers. All I had to do to make that device work with USB Flash drive and USB HDD was use a powered hub with the WM2003 drivers installed.
@cdred - As already mentioned www.orb.com is one way to go. You will need a PC running the Orb software at home and a way to get to it (i.e. dyndns.org).
The Slingbox is another way to achieve this, or IMHO, the Buffalo LinkStation is a good choice.
Scruffy

Connect mouse and Keyboard Wireless

How can I connect my Microsoft Wireless 3000
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
to my galaxy s2 using the OTG and the Usb reciver?
Help me

This is what I did with many Logitech wireless mouse and keyboard.
Plug the USB receiver onto the USB OTG cable. Then plug the cable into the phone. The devices should be detected and a mouse cursor will appear on your phone.

No! My sgs2 says "None USB device connected"
Sent from my GT-I9100 using XDA App

Not all devices are supported.

Really? What a shame
Sent from my GT-I9100 using XDA App

The keyboard Logitech Mini Dinovo and the mouse Logitech V470 work fine with my SGS2, with Bluetooth.
I just waiting my OTG USB cable to test if "Unifying" dongle work too (maybe Tuesday).

Mine is not working, "high power device detected", the phone can't drive even my wireless mouse...

Need an externally powered hub for high power devices.

grandlun said:
Mine is not working, "high power device detected", the phone can't drive even my wireless mouse...
Click to expand...
Click to collapse
Mine shows this message if I connect the USB OTG adapter first to the phone and then connect the USB receiver to it. To get it to work, connect the receiver to the adapter first before connecting to the phone. I use Logitech's unifying receiver with my SGSII and the keyboard and mouse works fine at the same time.

Sleepycat3 said:
Mine shows this message if I connect the USB OTG adapter first to the phone and then connect the USB receiver to it. To get it to work, connect the receiver to the adapter first before connecting to the phone. I use Logitech's unifying receiver with my SGSII and the keyboard and mouse works fine at the same time.
Click to expand...
Click to collapse
hi sllepycat3
i want just try to buy a new mouse and keyboard device with this new unifyng receiver for my galaxy s2, because actually i have try to work with a old logitech wireless keyboard (the old models with a big "box" with a led as a receiver) and don't work; i have also try one logitech mouse, with a little receiver (but not the new unifyng) and work fine...
well, if you confirm that work with a new receive of logitech, i can buy a new keyboard and mouse and be sure that work!
thanks a lot!
sam

focamonca said:
Really? What a shame
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
The MINI BLUETOOTH KEYBOARD on Amazon works just fine.

As Silverfox said, just get a BT KB/M and you'll keep the USB port free if you want to connect the charger or TV out adaptor.

well.. I'm using the logitech dinovo mini and over bluetooth work fine.. I had also try some other device..well my opinion is that the logitech device are supported without problem in both version wired and wireless. The other device depend.microsoft for example don't work correctly if you have the version with the big receive.
I had on try the new version with the little usb key.
Some other economic keyboard wired not work..
But with logitech di novo mini i had solve my problem.
Sent from my GT-I9100 using XDA Premium App

Hello,
maybe someone knows where to change settings. My problem: when I connect my wireless USB HP kbd/mouse dongle, my device identifies them as kbd/mouse, but I'm using only mouse. When my Android device is thinking, that there is connected kbd/mouse, he doesn't show me onscreen keyboard. How to activate on screen keyboard? Thank you

OTG devices

Just received my OTG, checking out mouse, keyboard and flash storages. Will post them here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Tested a thumb drive, it connected instantly and is behaving just like the SD card. Contents show up in the folder 'USB storage'.

Keyboard connected but device freezed. Had to restart the device. Will try some other keyboard. This one was a HP.

Mouse scroll wheel works too. Can scroll the page just like PC. Links or options are highlighted as the page is scrolled.

Here is a screenshot of the mouse pointer, i had keyboard connected too but i don't know how to show it on a screenshot.
I plugged in my Logitech wireless keyboard and mouse (thus connecting them simultaneously). Really happy!
I am now wondering if i can use the phone as a CPU and use my LED as a display. The input devices being connected wirelessly, it sounds do-able. Only question is how to connect the HDMI cable when the only slot is already serving input devices

galaxytab1 said:
I am now wondering if i can use the phone as a CPU and use my LED as a display. The input devices being connected wirelessly, it sounds do-able. Only question is how to connect the HDMI cable when the only slot is already serving input devices
Click to expand...
Click to collapse
I am just working on this setup, For that one need to use Bluetooth mouse and keyboard AND Samsung MHL HDMI cable.
I already had a Logitech Bluetooth mouse, and yesterday i bought Bluetooth mini keyboard which is HID and works very well with Note. Its available globally in <USD 20$.
My MHL HDMI is on the way, i should be playing around this weekend with this stuff.
Having teamviewer already configured for my work and home laptop, this should be real fun to use Note (CPU) and my HD TV

I have used MHL to TV, and bluetooth KB and Mouse for input. Works like a charm!

Any idea if those wireless devices that have their own dongles work?

geek_riot said:
Any idea if those wireless devices that have their own dongles work?
Click to expand...
Click to collapse
yes, i was using a logitech wireless keyboard and mouse with the receiver dongle plugged in to OTG (if that is what you mean?)

galaxytab1 said:
yes, i was using a logitech wireless keyboard and mouse with the receiver dongle plugged in to OTG (if that is what you mean?)
Click to expand...
Click to collapse
Yours is 1 single dongle for both keyboard and mouse?

vblues said:
Yours is 1 single dongle for both keyboard and mouse?
Click to expand...
Click to collapse
Yes. One dongle

galaxytab1 said:
yes, i was using a logitech wireless keyboard and mouse with the receiver dongle plugged in to OTG (if that is what you mean?)
Click to expand...
Click to collapse
That is exactly what I meant! Thanks! I have the Logitech Mini Controller (like the dinovo mini, sans Bluetooth) and it has a dongle. I love the keyboard/mouse combo and the flip up lid holds the note perfectly. I guess I am going to have to buy an OTG cable!
Sent from my GT-N7000 using xda premium

Can confirm the Logitech Unifying gear works (and allow simultaneous keyboard and mouse).
bmunshi said:
I am just working on this setup, For that one need to use Bluetooth mouse and keyboard AND Samsung MHL HDMI cable.
I already had a Logitech Bluetooth mouse, and yesterday i bought Bluetooth mini keyboard which is HID and works very well with Note. Its available globally in <USD 20$.
My MHL HDMI is on the way, i should be playing around this weekend with this stuff.
Having teamviewer already configured for my work and home laptop, this should be real fun to use Note (CPU) and my HD TV
Click to expand...
Click to collapse
Hope Teamviewer doesn't disappoint - when I last tried it out it didn't support external KB/Mouse properly. Only one I've found that does is Splashtop (works really great with the MHL/BT setup like in the video in my YouTube channel).

NZtechfreak said:
Hope Teamviewer doesn't disappoint - when I last tried it out it didn't support external KB/Mouse properly. Only one I've found that does is Splashtop (works really great with the MHL/BT setup like in the video in my YouTube channel).
Click to expand...
Click to collapse
Thanks, I was thinking to check out Splashtop, If Teamviewer doesnt work then i will switch to splashtop.

I am looking forward to purchasing 64GB flash drive for connecting through OTG. Do you guys think it will be supported? What is the maximum size that it can support?

Note, right now, only supports FAT32 File-System.
So even if you have a 64Gig Flash drive, it will still have to be formatted in FAT32.
Windows itself does not format anything bigger than 32GB in FAT32.
Also, you can't put any files bigger than . . i am not sure, either 2 or 4 GB each on a FAT32 formatted drive.
Siyah Kernel has NTFS and CIFS support, but no Note Support yet.
Abbyss has Note support, but no NTFS and CIFS support yet i think.

My OTG cable works fine when connecting a USB stick or a card reader, I am able to use the memory on the attached card.
However, I connected the Logitech dongle for a wireless mouse but it doesn't have any effect on the Note. Am I missing some settings somewhere? I have looked but I can't find anything. I assumed some drivers would be needed for this type of connection but looking at your comments it appears you got it to work without issue.

apprentice said:
My OTG cable works fine when connecting a USB stick or a card reader, I am able to use the memory on the attached card.
However, I connected the Logitech dongle for a wireless mouse but it doesn't have any effect on the Note. Am I missing some settings somewhere? I have looked but I can't find anything. I assumed some drivers would be needed for this type of connection but looking at your comments it appears you got it to work without issue.
Click to expand...
Click to collapse
Logitech wireless worked out of box, no drivers, no settings.

Stahlseele said:
Note, right now, only supports FAT32 File-System.
So even if you have a 64Gig Flash drive, it will still have to be formatted in FAT32.
Windows itself does not format anything bigger than 32GB in FAT32.
Also, you can't put any files bigger than . . i am not sure, either 2 or 4 GB each on a FAT32 formatted drive.
Siyah Kernel has NTFS and CIFS support, but no Note Support yet.
Abbyss has Note support, but no NTFS and CIFS support yet i think.
Click to expand...
Click to collapse
Ok, will stick to 32gig then

I'm using a Transcend 16GB JetFlash USB3 thumb drive to play TV shows and general transfers to the device - I get over 20MB/s transfers from my PC to the drive over USB2, so it's quite a bit quicker than copying to internal or external SD on the Note itself.

Fire TV 4K - Not enough power for external HDDs?

Hey guys,
I rooted my Fire TV and installed rbox' Prerooted Stock Images [5.0.5.1_r1]. I installed ParagonNTFS via ADB, started it on the Fire TV, and granted it root when prompted. This means from software side everything is ready for my external HDD. However, I tried to connect my old Samsung S2 2.5" external HDD with 500 GB (USB 2.0) and my new 2.5" Toshiba 1 TB (USB 3.0). The Samsung does not even turn on. The Toshiba continously tries to turn on but immediatly shuts down, then it tries again to turn on. Obviously the drives do not receive enough power via the USB port of the Fire TV. Is that a know problem or am I the only one?

From what I've read, only HDDs with its own power source works with any Fire TVs. I may be wrong though. Someone please confirm.

sneezing_corgi said:
From what I've read, only HDDs with its own power source works with any Fire TVs. I may be wrong though. Someone please confirm.
Click to expand...
Click to collapse
I have the AFTV1 and a Transend Storejet 1Tb and it works fine

wohltat said:
Hey guys,
I rooted my Fire TV and installed rbox' Prerooted Stock Images [5.0.5.1_r1]. I installed ParagonNTFS via ADB, started it on the Fire TV, and granted it root when prompted. This means from software side everything is ready for my external HDD. However, I tried to connect my old Samsung S2 2.5" external HDD with 500 GB (USB 2.0) and my new 2.5" Toshiba 1 TB (USB 3.0). The Samsung does not even turn on. The Toshiba continously tries to turn on but immediatly shuts down, then it tries again to turn on. Obviously the drives do not receive enough power via the USB port of the Fire TV. Is that a know problem or am I the only one?
Click to expand...
Click to collapse
Um I had an usb issue before with the Fire TV 4k and it was due to USB Debugging being turned on in developer settings. If it's on, turn it off as it seems to make the usb port use less power.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yep it's been mentioned here: http://www.aftvnews.com/this-is-why-your-amazon-fire-tv-usb-port-is-not-working/

XDA_h3n said:
Um I had an usb issue before with the Fire TV 4k and it was due to USB Debugging being turned on in developer settings. If it's on, turn it off as it seems to make the usb port use less power.
Yep it's been mentioned here: http://www.aftvnews.com/this-is-why-your-amazon-fire-tv-usb-port-is-not-working/
Click to expand...
Click to collapse
Thanks for your reply. I thought of that already. USB debugging is alraedy turned off. I also fear that I received a defect device in multiple ways. The device also does not dedect my 5 Ghz Wi-Fi but the 2.4 Ghz one of the same router.

wohltat said:
Hey guys,
I rooted my Fire TV and installed rbox' Prerooted Stock Images [5.0.5.1_r1]. I installed ParagonNTFS via ADB, started it on the Fire TV, and granted it root when prompted. This means from software side everything is ready for my external HDD. However, I tried to connect my old Samsung S2 2.5" external HDD with 500 GB (USB 2.0) and my new 2.5" Toshiba 1 TB (USB 3.0). The Samsung does not even turn on. The Toshiba continously tries to turn on but immediatly shuts down, then it tries again to turn on. Obviously the drives do not receive enough power via the USB port of the Fire TV. Is that a know problem or am I the only one?
Click to expand...
Click to collapse
I think the problem is the power from the usb port for your drive give the drive an external power and it works

rigoletto670 said:
I think the problem is the power from the usb port for your drive give the drive an external power and it works
Click to expand...
Click to collapse
so from these replies I take it the Fire tv2 cannot deal with the drive like my version 1.

rigoletto670 said:
I think the problem is the power from the usb port for your drive give the drive an external power and it works
Click to expand...
Click to collapse
How can I do that with an 2.5" drive that has no external power connection and will usually be powered via USB? Both drives worked perfectly on my WD TV Live.

maybe with a active usb hub

rigoletto670 said:
maybe with a active usb hub
Click to expand...
Click to collapse
I just wonder whether I am the only one with that problem or if my Fire TV 4K is just broken.

I had a first gen FTV and i could use my 500gb HDD normally. But with my FTV4K it doesn't work. So i guess yours not broken.

You need a powered hub for external hard drives. Mine work just fine with one.

Does the nvidia Shield has the same problem? Because if I have to buy a bunch of accessories, I will just go straigh for the next nvidia Shield sale.

wohltat said:
Thanks for your reply. I thought of that already. USB debugging is alraedy turned off. I also fear that I received a defect device in multiple ways. The device also does not dedect my 5 Ghz Wi-Fi but the 2.4 Ghz one of the same router.
Click to expand...
Click to collapse
Well for the 5G issue, it's apparent in most Amazon Fire devices, even on my stick and box!
You would need to move your channel down to 36 and it would work, it's a issue with the Fire tv's wi-fi certification or something like that.
Well it is possible that your hard drive just requires more power and that the Fire tv is using most of it There has been cases where the Fire TV 4K's USB Port does have issues, I remember reading an article where many people were complaining about it. Also I think there was an issue with the ethernet port using up power as well as it seems to be connected through a usb?

My 43" Toshiba Fire TV works fine with 750Gb HDD connected to USB 3.0 -> SATA adapter. BUT is works ONLY with FAT32 format so you cannot use it to watch 4K movies. I even connected it via USB 2.0 hub and use it at same time with USB keyboard. Is any possibility to make it read NTFS? My 7 YEARS OLD Samsung has USB 3.0 port and read ANY HDD formats.

Can't connect my black shark 3 to laptop

My black shark 3 only charges when connected to laptop. There is no pop up to connect it to laptop please help

I'm having the same problem. it used to be fine and then all the sudden, it doesn't connect to the pc anymore.

Good afternoon!
I am from Brazil and I have the same problem unfortunately and without a solution so far and I believe it is a physical defect ....
Before I suspected that the last security update of the month 12/2020 could have caused this but seeing this topic there are people with this problem since 09/2020, that is before the android security update ...
I follow the topic to see if someone gives a light because mine is the same way I connect on the PC with his original usb cable and the device just keeps charging and does not open the menu to select the data transfer mode and even if I go to "Developer options" and enter usb settings and leave selected data transfer, nothing happens unfortunately it just keeps charging and doesn’t connect with the computer.
I did tests with other usb cables and nothing and also tried to connect to a Macbook Air and the same thing the device only charges and nothing else.
Detail the OTG function of it works normally because I connected an OTG adapter with a pen drive and recognized it normally in the cell phone and became the only way to transfer his data to a pc using the otg adapter and a pen drive for this solution.

try closing google chrome on your laptop , then connecting your phone.

Lizzo said:
try closing google chrome on your laptop , then connecting your phone.
Click to expand...
Click to collapse
Good afternoon Lizzo !!
Boy, I thank you for the tip, but I've done it here and nothing ...
In fact I've tried I believe that everything ...
I have already restored the device and nothing to recognize on the PC.
I entered recovery connected to the pc and nothing to recognize.
I plugged in 2 different pcs and a notebook nothing.
I plugged in a 2011 Macbook air and nothing to recognize.
I plugged in normal USB 2.0 and 3.0 also nothing to recognize.
I called the multimedia in my car that mirrors the image of the cell phone and also nothing to recognize the cell phone.
Anyway it only charges when connected to any USB and the OTG function normally works because I connect a samsung adapter that I have and a pen drive and it recognizes normally ....
In other words, unfortunately a device of 400 USD that presents an idiotic defect like that of not connecting to the pc unfortunately ....
Even so I thank you for the tip and I'll keep an eye out to see if anyone else gives a tip.
Thank you all.

I have been thinking that I had the same problem, so I contacted the customer support and they told me to do this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello
Enable dev mode by click 5 times in setting-about your phone, and search usb configuration in the sear bar, find default usb configuration and choose file transfile.
I tried it and it didn't work, so I tried everything I could think of and connected the phone to an old windows computer (I was using apple computers) and it worked, it seems that Mac os doesn't detect the phone while windows ones do.
So if you guys are trying with Mac os, maybe you had the same problem.