Related
Hello everyone,
Last weekend i wanted to upgrade from Cyanogenmod 14.1 to LineageOS. First i wanted to dirty flash an "migration build" over my old build, but as soon as i tried to flash LineageOS it gave me an Error 7 (Trustzone error or something like that).
It appeared my firmware was outdated so i flashed OpenBeta 12 (Firmware+Modem) to update the phones firmware and this fixed the Error 7 problem and i was able to flash LineageOS, but it resulted in crashes when trying to boot . So i tried to do a full wipe and somehow it also messed up my recovery (TWRP 3.1.0.0), so i was stuck with a soft bricked phone.
I flashed stock recovery, but wasnt able to sideload stock ROM with ADB. So i just flashed TWRP again and flashed the latest LineageOS nightly and it worked !
I am on LineageOS right now and it is all working fine except that my 4G/LTE isnt working anymore. it is only connecting to HSPAP.
I then tried putting the SIM Card in my mothers phone to check if i could get a 4G signal there and it immediately did, so i am certain its either a problem with my OP3 or with LIneage OS.
Strange thing as well is that i tried putting the SIM in the second slot of my OP3 and somehow it does get 4G/LTE connection when i have it in slot 2.
I already checked if the APN settings. Anyone else having this problem, because i couldnt really find anyone else with a similar problem.
Im afraid my 1st SIM Slot just got broken somehow
Can anyone help me fix this?
Thanks in advance,
Riekelt-Jan Pasterkamp
I had/have some no-brand dual SIM China phone and it treated the SIMs in the same manner. I just replaced the radio or modem files and the problem disappeared.
When my OP3 makes SIM-related problems, an EFS restore or modem reflash usually fixes the issue. You don't have an EFS backup of a working period I imagine?
cabledaliens said:
I had/have some no-brand dual SIM China phone and it treated the SIMs in the same manner. I just replaced the radio or modem files and the problem disappeared.
When my OP3 makes SIM-related problems, an EFS restore or modem reflash usually fixes the issue. You don't have an EFS backup of a working period I imagine?
Click to expand...
Click to collapse
Not sure what an EFS backup is, but i did make a backup right before i tried to flash LineageOS.
I already tried to reflash OpenBeta 12 (firmware and modem).
Are the modem and radio files in my system folder? And can i just delete them so the system creates new/clean files?
Sorry if im asking all these noob questions, but as far as rooted phones go i only know how to install ROMs and other zip files and thats it
No you've nailed it! US model correct? Chinese models handle the dual Sims differently IIRC.
rjpurk said:
Not sure what an EFS backup is, but i did make a backup right before i tried to flash LineageOS.
I already tried to reflash OpenBeta 12 (firmware and modem).
Are the modem and radio files in my system folder? And can i just delete them so the system creates new/clean files?
Sorry if im asking all these noob questions, but as far as rooted phones go i only know how to install ROMs and other zip files and thats it
Click to expand...
Click to collapse
just download the radio file from ddicated radio thread and flash it
otonieru said:
just download the radio file from ddicated radio thread and flash it
Click to expand...
Click to collapse
Will try that. Thanks for the help ?
cabledaliens said:
No you've nailed it! US model correct? Chinese models handle the dual Sims differently IIRC.
Click to expand...
Click to collapse
Not sure if its a US model. Im from the Netherlands and i bought it in the official store last year around July. Any way to see what model i have. As far as i know my model number is A3003. Thanks!
Hello, I'm new
I'm not sure if this is the right place, I felt a discussion area was an okay place to share and discuss my findings
I'm working with the Boost Mobile Motorola E4, the contents to this thread will relate solely to the Boost E4
Bootloader Unlocking
Unlocking the E4's bootloader was very simple through Motorola's website, it is for certain unlocked
After unlocking the bootloader I got the bad key screen but in my experience that's normal
You can verify that your bootloader is unlocked by using fastboot or checking the Developer Options
Rooting
Other people claim to have success with it, I have not yet had that success Just flash Magisk 13.1 after flashing the verity zip, don't bother with anything else, root will work first try. If you tried another root method, you will have to restore with the method in post #2 before it will work without giving the error.
After flashing the superuser zip and the verity zip, I wasn't led to a successful root I instead downloaded SuperSU-v2.82-201705271822 and flashed that after the verity zip and i was able to reach home menu
I tried flashing Chainfire's SuperSU zip but the device stuck at the boost mobile logo, I will try again after I can get back to stock and do the processes over again and find a way to have 100% success each time Downloaded a new version SuperSU-v2.82-201705271822 as noted above and i was able to fully boot
The issue now is that SuperSU app isnt detecting root but Terminal is gaining root, I'm going to try reinstalling app from the market. I got the SU Binary Occupied error, going to try to downgrade it to 2.79 and see how that goes. It didn't work for me, now it says improperly installed.. Going to try something else. It's 1:55AM August second, taking a small break from the root, at least I got other things figured out for now.
verity zip link (flash first): https://www.androidfilehost.com/?fid=24459283995297893
Stock Resources
Sprint 7.1.1 stock RSD file: https://androidfilehost.com/?fid=673368273298975628
-update- I added the stock RSD file to the list, going to be doing some pulls of stock files for us to work with when I can.
I'm going to try to collect as much information as I can about this device and provide as much detail as possible
NOTE: The below IS NOT Boost Mobile stock, it's sprint will update when I figure out Boost Stock
The sprint stock does fully work with the Boost Mobile device, LTE/data services seems to not work until you do a Factory Reset (in settings). ##72786# didn't work. It is now working for me fully after the factory reset from settings. The boost apps automatically install after the factory reset and after the celluar setup on first boot.. My Boost, etc.
After a few times of flashing and re-setup I've ended up with HFA error 701 which asks me to contact service provider to configure the device for service. Fixed by turning phone off for 20 minutes to an hour and the activation processed correctly.
If your experience differs, let us know!
Restoring to Stock
Install Motorola Drivers
Download RSDlite v6.2.4: http://rootjunkysdl.com/files/Android Programs/RSDLite6.2.4.zip
Download the Sprint firmware file: https://androidfilehost.com/?fid=673368273298975628
Rename the zip to sperry.zip, the reason for this is to avoid the long file name error in RSD in some locations
Let the flashing process complete
Some people reported RSD not working in Windows 10, this is not fully true, install all moto and android drivers and it will show up fine as seen in below image
http://imgur.com/a/vdQxG
Thanks!,
rootjunky for RSD mirror
moto firmware team for the e4 stock 7.1.1
Have you check if this phone have gsm bands?
USA or International Variant?
zoofie666 said:
Hello, I'm new
I'm not sure if this is the right place, I felt a discussion area was an okay place to share and discuss my findings
I'm working with the Boost Mobile Motorola E4, the contents to this thread will relate solely to the Boost E4
Bootloader Unlocking
Unlocking the E4's bootloader was very simple through Motorola's website, it is for certain unlocked
After unlocking the bootloader I got the bad key screen but in my experience that's normal
You can verify that your bootloader is unlocked by using fastboot or checking the Developer Options
Rooting
Other people claim to have success with it, I have not yet had that success Just flash Magisk 13.1 after flashing the verity zip, don't bother with anything else, root will work first try. If you tried another root method, you will have to restore with the method in post #2 before it will work without giving the error.
After flashing the superuser zip and the verity zip, I wasn't led to a successful root I instead downloaded SuperSU-v2.82-201705271822 and flashed that after the verity zip and i was able to reach home menu
I tried flashing Chainfire's SuperSU zip but the device stuck at the boost mobile logo, I will try again after I can get back to stock and do the processes over again and find a way to have 100% success each time Downloaded a new version SuperSU-v2.82-201705271822 as noted above and i was able to fully boot
The issue now is that SuperSU app isnt detecting root but Terminal is gaining root, I'm going to try reinstalling app from the market. I got the SU Binary Occupied error, going to try to downgrade it to 2.79 and see how that goes. It didn't work for me, now it says improperly installed.. Going to try something else. It's 1:55AM August second, taking a small break from the root, at least I got other things figured out for now.
verity zip link (flash first): https://www.androidfilehost.com/?fid=24459283995297893
Stock Resources
Sprint 7.1.1 stock RSD file: https://androidfilehost.com/?fid=673368273298975628
-update- I added the stock RSD file to the list, going to be doing some pulls of stock files for us to work with when I can.
I'm going to try to collect as much information as I can about this device and provide as much detail as possible
If you would like me to test anything you can hit me up on Discord: Zoofie#6780 and we can brainstorm
Click to expand...
Click to collapse
Do you have the USA or international variant of the phone? The only bootloader unlocking guide I've found was for the international variant.
Mensarius said:
Do you have the USA or international variant of the phone? The only bootloader unlocking guide I've found was for the international variant.
Click to expand...
Click to collapse
Read the root thread
@zoofie666 were you able to actually flash the moto g5 twrp or did you just boot it? I can get it to boot with fastboot but I get a not signed or corrupt error when trying to flash it.
amarc78 said:
@zoofie666 were you able to actually flash the moto g5 twrp or did you just boot it? I can get it to boot with fastboot but I get a not signed or corrupt error when trying to flash it.
Click to expand...
Click to collapse
You can only boot it
mendelgordon said:
You can only boot it
Click to expand...
Click to collapse
Yeah, I came to that conclusion. Just read it elsewhere also. I'm going to see what I can do about building twrp.
is it possible to take backup of Moto E4 stock rom with RSD lite ?
kartik verma said:
is it possible to take backup of Moto E4 stock rom with RSD lite ?
Click to expand...
Click to collapse
Not sure, but you can do so by booting the Moto G 5 twrp with fastboot. Restoring works also.
amarc78 said:
Not sure, but you can do so by booting the Moto G 5 twrp with fastboot. Restoring works also.
Click to expand...
Click to collapse
For the international variant?
mendelgordon said:
For the international variant?
Click to expand...
Click to collapse
I have the Boost Mobile variant.
Is there anyone with the Boost Mobile variant that made a working system and boot backup? If so, could you please upload it for me? Mine got corrupted somehow and won't restore.
@amarc78 You should be able to use the Sprint firmware posted by zoofie666 - Boost is Sprint's prepaid brand.
The weirdness with the activation on Sprint/Boost seems to be normal, because I had trouble with two phones recently. The first was a retail unlocked e4 (to be used on Sprint), done before rooting, and activated at a Sprint corporate store last week by a rep who had trouble. The second phone was a retail unlocked Moto g4 Play (also to be used on Sprint), that I rooted first, got the SIM and back-end computer part taken care of by a rep at the same store yesterday, and did the rest myself.
hitokage004 said:
@amarc78 You should be able to use the Sprint firmware posted by zoofie666 - Boost is Sprint's prepaid brand.
Click to expand...
Click to collapse
Yeah, I know all about that. I've already made a stock rom zip with sprint firmware but I want Boost so I can make a zip for that.
Sent from my LGLS755 using XDA Labs
I can provide a backup of system but already rooted / disabled dm verity before I took the backup so /boot you'd have to snag the stock kernel, let me know if you want the nandroid tho.
CodyF86 said:
I can provide a backup of system but already rooted / disabled dm verity before I took the backup so /boot you'd have to snag the stock kernel, let me know if you want the nandroid tho.
Click to expand...
Click to collapse
Dang bro, you pop up everywhere I go around here, lol. Remember me from the moto g helping getting data on cm? Your the one who posted the nasa gif when we got it right? Anyway, I would gladly take what you have rooted or not, and any other imgs you would be so kind to provide me with. I was about to buy another now that they're $20 cheaper than when I got my first. I knew that would happen. I wanted to get my wife one anyway. I was a dumb ass and ran a flash all script for sprint stock firmware and forgot to remove everything but the system sparse chunks. So now I really need full stock firmware. Thanks a lot for responding man!
amarc78 said:
Dang bro, you pop up everywhere I go around here, lol. Remember me from the moto g helping getting data on cm? Your the one who posted the nasa gif when we got it right? Anyway, I would gladly take what you have rooted or not, and any other imgs you would be so kind to provide me with. I was about to buy another now that they're $20 cheaper than when I got my first. I knew that would happen. I wanted to get my wife one anyway. I was a dumb ass and ran a flash all script for sprint stock firmware and forgot to remove everything but the system sparse chunks. So now I really need full stock firmware. Thanks a lot for responding man!
Click to expand...
Click to collapse
I member..... 5.1 for falcon was a trial.... imma be getting this device next month. Love seeing the future happening before my eyes
SykkNyzz said:
I member..... 5.1 for falcon was a trial.... imma be getting this device next month. Love seeing the future happening before my eyes
Click to expand...
Click to collapse
Hey, don't you have a LG volt?
Hello guys, i have two questions:
a) after you unlock bootloader on this device, is it possible to flash the non boost (international e4) rom on it? if so, have you done it?
b) i used to have a moto e2 from boost mobile (xt1526) and did this with the unlocked international e2 rom (xt1527) and i was able to use my gsm networks with it as i dont live in the U.S and CDMA bands dont work in my country, would it be possible with this device too? Because GSM bands are embeded in snapdragon chipsets, so flashing a stock unlocked firmware should make it work, but i want to know if you have tried it
I have lost IMEI number after flashing Pie. On my Sprint Moto Z2 Force. Signal bar has turned grey and IMEI is showing as zero.
Wifi is working
Bluetooth is working
Barcodes in bootloader mode is showing some different IMEI no.
Downgrade to Stock Oreo or Naugat
If I downgrade to stock Oreo then I lost all wifi, sim and Bluetooth. Also no baseband found in bootloader.
Will appreciate if someone can help.
Thanks in advance.
If you have already flashed Pie Rom (including bl、 baseband), you will not be able to return to Oreo
Hello.
I am trying to research the imei bricks on Sprint models after Verizon pie update. In short, everything we understand says this should not be happening, and yet it is.
Can you, for research purposes, describe the state of your device when you applied the update? Was it running full verizon firmware down to the bl, modem, and gpt? I may have an experimental fix but I need to gather more info about the bricks.
Also, it is impetative that you don't flash any further modems for my fix to have a good chance to work. Thanks.
Thanks for the message,
The device working fine, very super smooth and I can feel the difference.
The only think which is not working is cell phone and it's because of 0 IMEI number, currently I am on pie retail version (NASH_RETAIL_9.0_PPX29.159-19_subsidy-default_regulatary-DEFAULT_CFC.xml) downloaded from mirrors lolinet com / firmware / Moto / Nash / retail
Pls let me know if you want more info.
Thanks in advance.
hqureshi said:
Thanks for the message,
The device working fine, very super smooth and I can feel the difference.
The only think which is not working is cell phone and it's because of 0 IMEI number, currently I am on pie retail version (NASH_RETAIL_9.0_PPX29.159-19_subsidy-default_regulatary-DEFAULT_CFC.xml) downloaded from mirrors lolinet com / firmware / Moto / Nash / retail
Pls let me know if you want more info.
Thanks in advance.
Click to expand...
Click to collapse
What firmware did you flash from? Stock? Do you have an unlocked bootloader?
If yes to all the above, I can give you some experimental things to try.
Yes to all and bootloader is unlocked.
btw i have flashed firmware in this order
1. i flashed NASH_PPX29.159_19_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml
then
2. XT1789-06_NASH_RETIN_9.0_PPX29.159-19_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
and now on
3. NASH_RETAIL_9.0_PPX29.159-19_subsidy-default_regulatary-DEFAULT_CFC.xml
That's not ideal (the additional flashes) but what I have is still worth a try and you have nothing to lose.
The first thing we need is to boot twrp on the device using fastboot (get the latest .img here and fastboot boot twrp.img it). Once in twrp, immediately reboot to "EDL."
https://dl.twrp.me/nash/
Get drivers for qualcomm 9008 mode device if needed (should show in Windows device manager under "ports"):
https://androidfilehost.com/?fid=11410963190603862036
Then get the nougat blankflash here:
https://mirrors.lolinet.com/firmware/moto/nash/blankflash/blankflash_from_NDX26.183-15_17.zip
Extract and run the cmd inside. You may need to try a few times, on different usb ports. I heard usb 2.0 works best.
If it succeeeds, try flashing your stock firmware and see if imei is back.
Good luck. This is a real stretch but it just might work...
PS: This does have potential to completely brick your device. Please keep that in mind and weigh your options.
I have tried as per instruction but still getting the "baseband not found" status on all stock oreo & nougat firmwares. So when I flash Pie retail I get wifi and Bluetooth back with 0 IMEI status. so the situation is the same.
BTW I have read somewhere the 0 IMEI issue is related persist file/folder/. I may be able to share reference link of that discussion in a while. (Link of discussion)
Let me know if you want me to test anything else. Thanks again for your time. best
hqureshi said:
I have tried as per instruction but still getting the "baseband not found" status on all stock oreo & nougat firmwares. So when I flash Pie retail I get wifi and Bluetooth back with 0 IMEI status. so the situation is the same.
BTW I have read somewhere the 0 IMEI issue is related persist file/folder/. I may be able to share reference link of that discussion in a while. (Link of discussion)
Let me know if you want me to test anything else. Thanks again for your time. best
Click to expand...
Click to collapse
That's really odd. Sorry, I have nothing right now for you but will look into this as best I can.
Thanks, btw whenever i flash stock nougat i am getting verification failed error during flashing of bootloader.img
EDL
R-T-B said:
That's not ideal (the additional flashes) but what I have is still worth a try and you have nothing to lose.
The first thing we need is to boot twrp on the device using fastboot (get the latest .img here and fastboot boot twrp.img it). Once in twrp, immediately reboot to "EDL."
https://dl.twrp.me/nash/
Get drivers for qualcomm 9008 mode device if needed (should show in Windows device manager under "ports"):
https://androidfilehost.com/?fid=11410963190603862036
Then get the nougat blankflash here:
https://mirrors.lolinet.com/firmware/moto/nash/blankflash/blankflash_from_NDX26.183-15_17.zip
Extract and run the cmd inside. You may need to try a few times, on different usb ports. I heard usb 2.0 works best.
If it succeeeds, try flashing your stock firmware and see if imei is back.
Good luck. This is a real stretch but it just might work...
PS: This does have potential to completely brick your device. Please keep that in mind and weigh your options.
Click to expand...
Click to collapse
I can see the qualcomm device in twrp on my device manager. how to i get to edl mode. there is no reboot edl option in twrp. do i command fastboot reboot edl when device in twrp screen? when i run the qboot blank-flash it says wating for device
Please use latest TWRP from here https://dl.twrp.me/nash/ load it using fastboot and the in TWRP click reboot and select EDL.
Let me know if you face any issue.
i'm on the same boat
no celluler, no IMEI
wifi and bluetooth working
Everyone keeps trying to flash pie firmware that isn't for their variant and this is the result, no baseband. Plus once you upgrade to a pie modem, you can't go back to an oreo modem. Maybe something will come along and remedy that, that's a big maybe too. The devs are trying to find a solution, but there just might not be one. You can't blankflash your way out of it, and if you're not careful you can brick your phone for real. Not 9008 brick, paperweight. Not trying to be an ass, just trying to warn others. If it isn't pie for your phone, don't flash it.
Blankflash doesn't work anyways.
Stand by we are working on another fix.
R-T-B said:
Blankflash doesn't work anyways.
Stand by we are working on another fix.
Click to expand...
Click to collapse
Let me know if you need this fastboot_nash_verizon_oem_vzw_user_9_PCX29.159-21_10d9a_release-keys-cid2_vzw.tar.gz. I have got it from @oslov a member of discord.
I have tried this in this sequence but still zero IMEI.
1. Nougat Blank flash
2. Flashed Stock Verizon Oreo and then staying in bootloader mode I flashed above Pie Update using Flash-All batch file.
Phone successfully booted with Verizon sim activation warning but IMEI was 0.
I thought I should update you guys.
Thanks
Oslov is my discord nick.
Confusing I know, lol.
Be careful with that file, we don't fully understand it yet. I gave it to you because, how much worse off can you be really?
R-T-B said:
Oslov is my discord nick.
Confusing I know, lol.
Be careful with that file, we don't fully understand it yet. I gave it to you because, how much worse off can you be really?
Click to expand...
Click to collapse
Lol. Wow!
Thanks again for doing this. Best
un1ocked said:
i'm on the same boat
no celluler, no IMEI
wifi and bluetooth working
Click to expand...
Click to collapse
Have restored IMEI # with the help of @oslov, We will share the solution in a while.
hqureshi said:
I have lost IMEI number after flashing Pie. On my Sprint Moto Z2 Force. Signal bar has turned grey and IMEI is showing as zero.
Wifi is working
Bluetooth is working
Barcodes in bootloader mode is showing some different IMEI no.
Downgrade to Stock Oreo or Naugat
If I downgrade to stock Oreo then I lost all wifi, sim and Bluetooth. Also no baseband found in bootloader.
Will appreciate if someone can help.
Thanks in advance.
Click to expand...
Click to collapse
I have resolved the 0 IMEI issue with the help of R-T-B, by doing undo Sim/network Unlock. changing CHMOD of id_00 to 0770
so now I am facing sim/network locked,
So whenever i unlock the sim/network lock i get 0 IMEI issue.
I will appreciate if someone now can help me to unlock SIM/network lock while keeping IMEI
I am currently on Retail pie with Sim/Network Locked. Phone Model is Sprint XT1789-03, dual sim enabled
Hello there !
I got the RN8Pro, last week and i unlocked it today. I naturally started to look how to root/install TWRP. I found numerous threads with instructions on how to do it but i also found a lot of warnings that it may brick the device, and that if that happens i need a special account to be able to unbrick it. It seems that some methods will work for the Chinese version while bricking others and vice versa. I have the Global ROM version 11.0.3.0(PGGEUXM) and the model of my phone is M1906G7G. Do you think it's safe for me to try flashing TWRP or at least root through ADB ?
I have also searched for custom ROMs and did not find any. The phone is relatively new so i wouldn't mind if i had to wait a bit, but i have also read that people just don't want to develop for it because of the Mediatek chip. Everyone says that development is not possible because there is no source code the the Mediatek chip. But here it says that the sources have been released partially here and the rest here. Is there something that's missing from these repos that makes development impossible ?
I also would like to become more than just a user and learn how to make custom roms. I found this thread that compiles some guides but a lot of them seem a bit outdated and I'm lost. Is that a good starting point or i should i go elsewhere ?
Thanks ^^
TheBolshe said:
Hello there !
I got the RN8Pro, last week and i unlocked it today. I naturally started to look how to root/install TWRP. I found numerous threads with instructions on how to do it but i also found a lot of warnings that it may brick the device, and that if that happens i need a special account to be able to unbrick it. It seems that some methods will work for the Chinese version while bricking others and vice versa. I have the Global ROM version 11.0.3.0(PGGEUXM) and the model of my phone is M1906G7G. Do you think it's safe for me to try flashing TWRP or at least root through ADB ?
I have also searched for custom ROMs and did not find any. The phone is relatively new so i wouldn't mind if i had to wait a bit, but i have also read that people just don't want to develop for it because of the Mediatek chip. Everyone says that development is not possible because there is no source code the the Mediatek chip. But here it says that the sources have been released partially here and the rest here. Is there something that's missing from these repos that makes development impossible ?
I also would like to become more than just a user and learn how to make custom roms. I found this thread that compiles some guides but a lot of them seem a bit outdated and I'm lost. Is that a good starting point or i should i go elsewhere ?
Thanks ^^
Click to expand...
Click to collapse
Can't you look at guides section we need Testers for POSP :crying:
girishjangir7 said:
Can't you look at guides section we need Testers for POSP :crying:
Click to expand...
Click to collapse
I did, but what is said there doesn't apply to me. I don't live near a center and I bought it on AliExpress, so I don't tink that I have a guarantee that I could use.
TheBolshe said:
I did, but what is said there doesn't apply to me. I don't live near a center and I bought it on AliExpress, so I don't tink that I have a guarantee that I could use.
Click to expand...
Click to collapse
No problem then wait for someone to test:laugh:
TheBolshe said:
I did, but what is said there doesn't apply to me. I don't live near a center and I bought it on AliExpress, so I don't tink that I have a guarantee that I could use.
Click to expand...
Click to collapse
I would love to help though. But your post is quite cryptic. More details could be nice like what are the risks, what is need to be done, what to do in case of a problem. Plus, it's my only phone ATM and I am poor ^^
It Is Safe As Well As Not Safe.
I Had Bricked My Redmi Note 8 Pro(8GB) And I Had To Visit Mi Service Centre As I Required Xiaomi Authorised Account Which I Don't Have.
Some Peoples Bricked Their Phone After Flashing TWRP And Some After Flashing Wrong Boot.img
I Flashed TWRP Successfully But When I Rooted My Phone, I Faced Bootloop Problem Then To Solve That Problem I Accidently Flashed Wrong Boot.img File( 10.0.4 Boot File Into 11.0.3) Which Resulted Into Bootloop
But If You Follow All The Steps Carefully Then It Is Absolutely Safe.
Hemant Singh Rajput said:
I Had Bricked My Redmi Note 8 Pro(8GB) And I Had To Visit Mi Service Centre As I Required Xiaomi Authorised Account Which I Don't Have.
Some Peoples Bricked Their Phone After Flashing TWRP And Some After Flashing Wrong Boot.img
I Flashed TWRP Successfully But When I Rooted My Phone, I Faced Bootloop Problem Then To Solve That Problem I Accidently Flashed Wrong Boot.img File( 10.0.4 Boot File Into 11.0.3) Which Resulted Into Bootloop
But If You Follow All The Steps Carefully Then It Is Absolutely Safe.
Click to expand...
Click to collapse
Mine has 6gb ram. Which TWRP img did you use?
When it's in bootloop, all I need to do is hold power up to get to fastboot so I can flash boot.img right?
TheBolshe said:
Mine has 6gb ram. Which TWRP img did you use?
When it's in bootloop, all I need to do is hold power up to get to fastboot so I can flash boot.img right?
Click to expand...
Click to collapse
I Flashed This TWRP Through CMD
https://forum.xda-developers.com/re...overy-unofficial-twrp-recovery-redmi-t4002397
You Need To Press&Hold Power+Vol Down Button To Enter Into Fastboot Mode.
When TWRP Flashed Successfully Through CMD You Have To Immediately Disconnect Your Phone From PC Otherwise Your Phone Will Load Stock Recovery.
---------- Post added at 12:45 PM ---------- Previous post was at 12:42 PM ----------
TheBolshe said:
Mine has 6gb ram. Which TWRP img did you use?
When it's in bootloop, all I need to do is hold power up to get to fastboot so I can flash boot.img right?
Click to expand...
Click to collapse
I Think You Shouldn't Take Risk As Your Phone Has No Warranty
I flashed my device using the Indian MSM Tool and I am unable to revert back the stock T-Mobile flash using the T-Mo MSM Tool. Now my mobile radio will not enable. I tried flashing multiple T-Mobile modems that are posted on here and that did not fix the issue. So let me summerize.
Can someone guide me to 1) Flashing back to the T-Mobile stock firmware from the IN version, and or 2) Help me get my radios working again. I'd be willing to donate to whoever can help me resolve this issue!
Thanks!
Thanks, unfortunately it didn't work for me. My IMEI, MAC Addresses, and fingerprint functionality is still working. Now it's not recognizing my SIM card at all.
@FizzyAps @craznazn Do yall have any suggestions? Seems yall are the all stars here!
ripclap said:
Thanks, unfortunately it didn't work for me. My IMEI, MAC Addresses, and fingerprint functionality is still working. Now it's not recognizing my SIM card at all.
@FizzyAps @craznazn Do yall have any suggestions? Seems yall are the all stars here!
Click to expand...
Click to collapse
India MSM is known to screw things up and make devices think they are LE2120 instead of whatever it originally was, but at the same time, that's what makes it able to also flash ColorOS over to Oxygen easily...
I remember people solving something like issue on this forum, might need to search extensively.... I haven't had my OP9P for over 6 months now probably, so I can't help much... best of luck!
bencozzy said:
Is it possible to pop a different sim in to see if it recognizes it? Could be the sim.
Click to expand...
Click to collapse
I tried 2 others but no luck.
craznazn said:
India MSM is known to screw things up and make devices think they are LE2120 instead of whatever it originally was, but at the same time, that's what makes it able to also flash ColorOS over to Oxygen easily...
I remember people solving something like issue on this forum, might need to search extensively.... I haven't had my OP9P for over 6 months now probably, so I can't help much... best of luck!
Click to expand...
Click to collapse
[]
I really hate to say this. But I don't think there's no coming back from India os. I did the same thing not once but twice. I called T-Mobile and used my insurance. Only way. Read the topic in this forum bout the India msm tool. Idk if u noticed how much different the India os is from the eu and global os. But if there's away I wanna know also. Cause now the only msm tool your going to be able to use is the India one. But you can update to the a12 one of the color or oxygen I can't remember but ur modem will come on everything will be fine for a few days then it will start messing up again.
ripclap said:
I flashed my device using the Indian MSM Tool and I am unable to revert back the stock T-Mobile flash using the T-Mo MSM Tool. Now my mobile radio will not enable. I tried flashing multiple T-Mobile modems that are posted on here and that did not fix the issue. So let me summerize.
Can someone guide me to 1) Flashing back to the T-Mobile stock firmware from the IN version, and or 2) Help me get my radios working again. I'd be willing to donate to whoever can help me resolve this issue!
Thanks!
Click to expand...
Click to collapse
have you read this thread yet?
[TMO] 9 PRO MODEM RETENTION/DATA FIX
----- With the release of OOS13, the modem issue no longer exist. Thank you all for the support & help with this unfortunate issue, we had to endure.... ----- EXPLICITLY FOR TMOBILE 9 PRO (I'm not responsible for your failure to read or...
forum.xda-developers.com
amaroney55 said:
I really hate to say this. But I don't think there's no coming back from India os. I did the same thing not once but twice. I called T-Mobile and used my insurance. Only way. Read the topic in this forum bout the India msm tool. Idk if u noticed how much different the India os is from the eu and global os. But if there's away I wanna know also. Cause now the only msm tool your going to be able to use is the India one. But you can update to the a12 one of the color or oxygen I can't remember but ur modem will come on everything will be fine for a few days then it will start messing up again.
Click to expand...
Click to collapse
I think you're right. I'm going to RMA it with Oneplus.
I thought with my persist, modest1, and modemst2 I could SMT flash it and restore those files but I get a OnePlus write protection using edl and the OEM Unlocking option will not enable in the OS now. Hopefully they warranty repair it. That's my only concern. It's fairly new lol
Sorry I am just going on what that one thread was saying. And my experience I had to make TMobile believe that it was the phone breaking. Be sure to switch it back to the TMobile os. If the msmtool doesn't work fastboot flash it back before u take it back. The 2nd time they went through my phone saw I had the xda app they really started questioning me. I grabbed my phone back and said umm why u looking in my phone privacy dude. You're concern is only with network and data not my apps files and folders. But just save ya some trouble
amaroney55 said:
Sorry I am just going on what that one thread was saying. And my experience I had to make TMobile believe that it was the phone breaking. Be sure to switch it back to the TMobile os. If the msmtool doesn't work fastboot flash it back before u take it back. The 2nd time they went through my phone saw I had the xda app they really started questioning me. I grabbed my phone back and said umm why u looking in my phone privacy dude. You're concern is only with network and data not my apps files and folders. But just save ya some trouble
Click to expand...
Click to collapse
I'll just flash it clean to where it doesn't even boot lol
Maybe its a bit off topic... but what do we learn about it? NEVER buy a carrier branded device if you want play with root. The lower price is not worth. I learned that over 10yrs ago xD
RheinPirat said:
Maybe its a bit off topic... but what do we learn about it? NEVER buy a carrier branded device if you want play with root. The lower price is not worth. I learned that over 10yrs ago xD
Click to expand...
Click to collapse
Yea I learned my lesson
What sucks is I have the modemst1, modemst2, and persist image backups but I cannot unlock it to upload. I am trying to modify the MSM Tool settings.xml to patch the modemst and persist images and I almost had success using the SMT Downloader but I think I don't have the offset bytes set properly to match the partition table.
Try this, worked for me from In back to TMO....
File on MEGA
mega.nz
TheGhost1951 said:
Try this, worked for me from In back to TMO....
File on MEGA
mega.nz
Click to expand...
Click to collapse
Internet explorer user spotted. xD
ekin_strops said:
Internet explorer user spotted. xD
Click to expand...
Click to collapse
Beg your pardon, I used the Indian MSM to unbrick before I was aware of it changing my TargetID to IN. Now I have to use a modded MSM tool to flash TMO firmware. I use Python3 to extract the .ops file, then open settings.xml, remove the "Target" line at the bottom encrypt back to a .ops file with the name out.ops and then flash that with the MSM tool. Then it will flash the TMO firmware and you are good to go.......
- op6 user - its destroyed now
but as i see that u cant use any other msm but the indian one? right?
i destroyed my op6 system and partations before,
OnePlus Agency, tried to fix it but no luck, i fixed it by msm but not the normal one
if 9pro msm is the same as op6 so you should do this
first, take twrp backup of EFS and MODEM partations and VENDOR ( idk if vendor is important but for precaution )
take another backup of EFC and MODEM by any root apps for precaution too
use the t-mobile msm flashtool and press on verify
the SMT mode should be able to use now
go to options, turn on the COM box or whatever
start flashing with SMT, but i think its high risk bc idk what error you get by normal flashing
keep in mind that SMT Mode will reFlash all known partations and hidden, hidden like MODEM, EFS, etc
my story with this is long, but funny for me, and big lesson..
thx for allah
@ripclap
edit: forget to tell that u have to restore the EFS backup, u should root t-mobile version or idk if u can restore it with some apps without root i dont remember
with op6 old firmware there is something called nvBackupUI it allow us to backup EFS and Restore it by one file
i know this maybe too old now but it may help
edit2:
some links about backup and restore EFS
1- https://community.oneplus.com/thread?id=278167
2- https://www.getdroidtips.com/how-to-backup-or-restore-qcn-efs-on-qualcomm-devices/
3- https://www.droidthunder.com/how-to-backup-efs-imei-on-android-phones/
ALL of this is for SMT Mode, because it may clear the EFS partation and Root is needed to restore it, idk if there is non root method, do ur own search