Hey Guys,
Many users downgraded their ColorOs12 to ColorOs11.3 on oppo reno6 5G device due to many bugs on it, they want to install ColorOs12 but they are not getting OTA update, they are wandering how can they install ColorOs 12 back on their phone, So, here I have come up with a method to directly flash ColorOS12.
Note: Data will(or might) be erased in this method so please take backup of you data on phone.
This has been tested on Indian version, I am not sure if it will work for other countries.
I strongly recommend to take full firmware backup using method below before proceeding
Backup full firmware(ROM) of any MediaTek device using MTK client| Oppo reno6 5G | MT6877
Hello Guys, Many times we encounter a situation where we need to do some software update, flash custom ROM, install stock ROM etc, so it is advisable to take full firmware/ROM backup of your device. If required then you can flash this backup to...
forum.xda-developers.com
Step1: Pre-requisite -Installing required drivers and setup
From link below download drivers and setup.
Install mediatek driver.
Install python (during installation of python please select "install for all user" from customization and tick add path to system variable)
install usbdk.
download extarct Mtk client tool.
go to folder where you extract mtk client
View attachment 5541629
open cmd here and run below command
cd mtkclient
pip3 install -r requirements.txt
In default setting it takes 2 hour to flash but after change it takes 13 min. If you want to increase flashing speed then open mtk_daxflash.py file from library folder, search "dsize = min(length, 0x200)" and replace it with "dsize = min(length, 0x2004)" , save and close the file.
You need to close command prompt in order to take effect of change.
Reference(https://github.com/bkerler/mtkclient/issues/271)
New Qcom Mtk Driver V3.0.5.1.rar | by TUSER HP for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Download Python
The official home of the Python Programming Language
www.python.org
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
github.com
Releases · daynix/UsbDk
Usb Drivers Development Kit for Windows. Contribute to daynix/UsbDk development by creating an account on GitHub.
github.com
Step2: Download and extract the ColorOs 12 firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CPH2251_11_C.27_ColorOS12_Android12_Latest.rar
drive.google.com
Step3: Flash the firmware
on cmd type below command to flash the firmware
python mtk wl "ROM location full path"
it will wait for devices.. Power off the phone, wait 10 sec then press vol up + vol down together and then plug the usb cable.
Once device detected , it will display devices information and start flashing
View attachment 5541639
View attachment 5541641
View attachment 5541645
While flashing it will dump the preloader, this file is very important so, please keep this file safely. this file may require in future.
View attachment 5541661
Step4: Boot the phone
Once flashing completed, press vol up + power button together for 30 sec. Wait for device to boot.
Step5: Flashing the preloader.bin (only if required)
In case, even after flashing completed successfully but some time device does not boot, only black screen, no charging sign either then don't panic, device has entered into emergency download mode, if you face the same then it's time to flash preloader.bin file. Follow below steps
1) download SP flash tool specific version v5.2148. (https://androidmtk.com/smart-phone-flash-tool)
2) download attached preloader.bin, scatter file and auth file from link below and place all these files at same folder.
MT6877_flashing_preloader.zip
drive.google.com
3) open sp flash tool, select download agent files from mtk folder as shown on image and load scater file and auth files respectively.
View attachment 5581171
4) In cmd run command "python mtk payload". Now press and hold vol+ vol- or all the buttons together, it should show payload sent successfully.
5) Now in sp flash tool click on Download button, it should flash the preloader successfully.
6) once preloader is flash successfully you can turn on the phone by pressing vol+ and power button together for 20 sec. If attached preloader does't flash then you can try flashing your device backup preloader.bin created/shown on step3.
so by this way we directly flashed ColorOS 12 on oppo reno6 5G.
Tips: If due to some reason flashing did not completed successfully then please press vol up and power button together for 30-40 sec to boot the phone (exit the brom mode).
Disclaimer: I have tested this method on my phone, it's 100% working but I will not responsible if damage any damage happens to your device while doing this. So do it at your own risk.
thanx nand for helping me in upgrading to coloros 12 again,this process worked successfully.
Thanks for the info.
My question is: can I use this method to remove phone branding using stock firmware image you pointed in your post?
macslui said:
Thanks for the info.
My question is: can I use this method to remove phone branding using stock firmware image you pointed in your post?
Click to expand...
Click to collapse
Hi, i didn't understand your question. Can you explain more.
Nand kumar said:
Hi, i didn't understand your question. Can you explain more.
Click to expand...
Click to collapse
Sorry. Try to better explain: I have a Vodafone branded reno 6 that accept any sim card. I only want to remove Vodafone branding (boot logo and custom app that are present only in branded phone).
Yes, you can try. I recommend you to take full firmware backup before doing this as explained in guide.
bonjour a tous quand j'écrit pip3 install -r requirements.txt j'ai une erreur :
ERROR: could not open requirements file :[Errno2] no such file or directory: requirements.txt
merci de m'aider
Please run this command from mtk folder
Nand kumar said:
Yes, you can try. I recommend you to take full firmware backup before doing this as explained in guide.
Click to expand...
Click to collapse
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!
macslui said:
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!
Click to expand...
Click to collapse
I was able to reenter brom mode. Now I'm reflashing again.
Hi all, everything ok now. I've flashed COS12 and now my phone is non more brand (vodafone) related.
Nand kumar said:
Please run this command from mtk folder
Click to expand...
Click to collapse
ok merci je ne savais pas comment ouvrir cmd a partir d'un fichier fonctionne très bien merci
macslui said:
Hi all, everything ok now. I've flashed COS12 and now my phone is non more brand (vodafone) related.
Click to expand...
Click to collapse
macslui said:
Glade to hear that you removed brand using thus method.
Click to expand...
Click to collapse
Unfortunatly COS12 in my opinion Is very laggy. I'm trying tio rollback to COS11 but, after flashing using your guide, the phone do not boot anymore. So I have to go back to 12. It's only my experience on COS12?
Hi, for many peoples, Color os12 was not laggy but have some bugs like battery draining etc.
For your device is not booting on color 11 then you have to flash preloader using Sp flash tool version v5.2148
Thanks Nand, allways ready to answer, thanks! Can please explain how to flash preloader with SP flash tool please? I have preloader from backup. Thanks again for your support.
Removed ...
macslui said:
Thanks Nand, allways ready to answer, thanks! Can please explain how to flash preloader with SP flash tool please? I have preloader from backup. Thanks again for your support.
Click to expand...
Click to collapse
Removed my contact details as I was getting to many message/calls on phone.
macslui said:
Hi Nand, I've done everything as you pointedout in this document and backup document.
Unfortunately I was able to flash the phone with success but now it do not turn it on anymore.
I've tried to every button combination but it remain off.
I also cannot enter brom mode anymore.
Have you some suggestion?
Thanks!
Click to expand...
Click to collapse
Same happen with me.. My phone is not bootibg up , no logo, no charging logo, not even single sign for alive please help me out help help
Cosmicsh said:
Same happen with me.. My phone is not bootibg up , no logo, no charging logo, not even single sign for alive please help me out help help
Click to expand...
Click to collapse
Removed my contact details as I was getting to many message/calls on phone.
Related
If you can get in download mode, nothing is lost. You can still go back and restockify you LG Optimus G (stock rom ,locked bootloader ,no root).
Original Work by [email protected] I have only translated it to English
Tested and working on LG-E975
Some tips before you start
As you will see is a fairly simple procedure, but not without risk. Take a quick read the entire guide before you begin: it will help you understand how to move.
The most important thing is to keep calm, do not panic and do not crush random keys. If you do not understand a passage, reread it. If you have not figured it out yet, reread it AGAIN or ASK here for help. No one runs behind you, so do not do things in a hurry.
I DO NOT TAKE ANY RESPONSIBILITY IF YOU BRICK YOUR PHONE.
Given that at end of the flash is recommended to do a hard reset, is a good idea to make a backup of all your personal data (photos, videos, etc etc), contacts , and if you want even applications.
DON'T FORGET TO BACK UP EFS PARTITION!
Prerequisites
1. Download the KDZ with this tool (credits [email protected]) https://mega.co.nz/#!wxoHSayQ!AsUn6wfsc0rts87HIlOSwBd9dilot2229useWzrsH_g
2. Download and install the LG USB drivers LG USB Drivers
3. Download this file. It's a compressed file that contains everything you need NEW KDZ Updater
4. Download and install LG Mobile Support Tool http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
Let's start
1. Extract the "Flashtool" folder on the desktop, or where you want. Open the folder "Flashtool" and install msmxl.msi (if not already installed).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Turn off the phone and connect it to the PC with the USB cable while holding VOLUME- AND VOLUME +, until you see the download mode logo. The PC will install some drivers. There may be a kind of protection that prevents you enter this mode if there is too little current on the phone.
However, you must be able to get to the screen that's underneath.
4. Go back to Flashtool folder and run as administrator WindowsEnabler.exe. Go to the bar at the bottom right, and click once with the left mouse button over the icon of WindowsEnabler, so that appears the "On"message.
5. Now run as administrator UpTestEX.exe and do the following:
-Select the .KDZ file that you want to flash
-Set "3GQCT"
-Set PhoneMode "EMERGENCY"
Once done, click "Normal web upgrade test"
6. In the next window click "Upgrade Start"
7. Wait a few seconds an a new window will pop up.
- Click "Clear phone.."
- Select different country if you're not in Korea
- Select Language
- Click OK
After this the LG flashing tool should start analyzing your phone and flashing the .KDZ
Once done you can detatch the USB cable and see if the phone boots up. However it will probably bootloop. In this case follow the Hard Reset Procedure below.
Hard Reset Procedure
The phone has to be off. Hold Volume - AND Power , a message will show up confirming the factory reset. Press Power Button twice , than wait. It will auto reboot.
Thanks:
- [email protected] For the realization of the guide
- [email protected] For the big work regarding .KDZ files
- [email protected] Flashing 1 GB and greater .KDZ
Notes
- I have translated this guide because the one I found was little bit tricky unclear and didn't work for me, I hope I have done a good job. I'm anyway available to any modification. Just write below.
- Also I'm Italian so there may be some mistakes in the translation , report back i will correct them with pleasure.
Don't forget to report back if it worked!
reserved 1
Does this ring a bell to you?
http://forum.xda-developers.com/showthread.php?t=2010624
Another question, why place the kdz folder in C:/? I have used kdz updater more than 10 times,it's well placed in D:/Downloads/ folder.It's working everywhere,no need for a special path.
And you didn't mention the 1gb+ file error. kdz updater will not work with bigger files.
What's tricky in potatohead thread?
1.have proper drivers installed,this is universal law for ALL devices. no drivers,not working.
2.download correct kdz file for your phone.
3.download kdz updater
4.enter download mode
5.open kdz updater and choose the file,selecting the right settings.
6.start ,wait to finish and that's it.
If anyone understood something else,it's not the author's fault.
I did all that you point in your guide but during the process, the program went in Not Responding, and after 30s Windows said he closed the program , and now my phone is stuck in Download Mode... Please help me
What windows are you using, also, what machine(laptop/desktop)..
If you are using a desktop,make sure you are using a rear usb port,not front and not through a usb hub,not even an usb extension cable.
if you are using a laptop,be sure you are using usb 2.0,not 3.0.
Rockguy40 said:
5. Now go back in Software Update, select the .KDZ file that you want to flash, and set entries as in the picture. Type "3GQCT" PhoneMode "EMERGENCY".
Click to expand...
Click to collapse
It's not ''Emergency''...phone mode must be ''CS_EMERGENCY'' :good:
Backstaba said:
I did all that you point in your guide but during the process, the program went in Not Responding, and after 30s Windows said he closed the program , and now my phone is stuck in Download Mode... Please help me
Click to expand...
Click to collapse
try using this version, tested windows 7 64 http://www.mediafire.com/download/ekkglj22rh6alho/FlashTool.1.0.54.rar
JasonBourne.Qc said:
It's not ''Emergency''...phone mode must be ''CS_EMERGENCY'' :good:
Click to expand...
Click to collapse
I didn't write the guide as I said , anyway EMERGENCY mode worked for me.
Backstaba said:
I did all that you point in your guide but during the process, the program went in Not Responding, and after 30s Windows said he closed the program , and now my phone is stuck in Download Mode... Please help me
Click to expand...
Click to collapse
As I write in the guide it's normal for the program to go in non respond when decompressing the .kdz but if you don't touch the windows (not a single click) of the updater, windows shouldn't auto kill the program.
it not work
I cant found LG mobile usb modem I am installed driver
Phone was not found from KDZ (
help me..
sorry, my ENG very bad
Rockguy40 said:
If your phone is stuck on the logo LG, do a hard reset .... See below for the procedures.
If the phone starts up as normal, it's recommended to do a hard reset.
Hard Reset Procedure
The phone has to be off. Hold Volume - AND Power , a message will show up confirming the factory reset. Press Power Button twice , than wait. It will auto reboot.
Click to expand...
Click to collapse
My phone get stuck on the logo LG but I can't hard reset ( Hold Volume - AND Power : nothing show on screen ), what do I have to do now?
thank in advance!
Hi,
Interesting post, so this i to unbrick a phone and revert back to original state of the phone (out of the box).
Is this also a possible method to flash any firmware I want. Let me explain, I have my new OG from French Operator SFR with a custom ROM and want to install as a replacement the latest FRA or EUR stock firmware from LG. Can this method be executed safely, OR should I unlock my bootloader and go for a firmware flash through the CWM recovery way instead ?
Thanks for your tip.
bobthedwarf said:
Hi,
Interesting post, so this i to unbrick a phone and revert back to original state of the phone (out of the box).
Is this also a possible method to flash any firmware I want. Let me explain, I have my new OG from French Operator SFR with a custom ROM and want to install as a replacement the latest FRA or EUR stock firmware from LG. Can this method be executed safely, OR should I unlock my bootloader and go for a firmware flash through the CWM recovery way instead ?
Thanks for your tip.
Click to expand...
Click to collapse
Well, i am now root and have unlocked boot loader and installed cwm touch recovery. I feel it was all useless for my purpose being : install à stock firmware instead of my sfr operator ROM.
The right procedure will be through kdz?
CAN i install a lg firmware now from cwm ?
Firmware link update
Please, anyone knows new links to LG E975 original firmware? The link I found for Italy versions are not working anymore. I need unbranded and Vodafone versions. Many thanks.
Lg-firmware.com
Sent from stock LG E975/smart phones,dumb people. now Free
LGE975 firmware
Many thanks for the help but Lg-firmware doesn't work, google suggested lgfirmwares but there is only one type of firmware for LGE975 and the link is broken...
I saw that the link have been only modified in csmgdl lgmobile com but the files are still there.
I just downloaded 10h open romania from that place.
Sent from stock LG E975/smart phones,dumb people. now Free
hi i can't seem to get the KDZX_FW_UPD to open. i've tried running it in admin mode and installing the msxml first but no luck, can someone help?
kimitza said:
I just downloaded 10h open romania from that place.
Sent from stock LG E975/smart phones,dumb people. now Free
Click to expand...
Click to collapse
Does 10h support English...??
Sent from my LG-E975 powering Stock 4.1.2
Yes,it has all the languages...
Hello everyone. I was with Android 7 on my ZS570KL and returned to 6 for a tutorial found on the internet and worked, but all the sensors of the device were disabled (screen rotation, gyroscope, approximation, fingerprint [only registers up to 93% and gives error], and all the others). How do I reactivate? I came back to Android 7, formatted the device several times, and nothing solves!
What tutorial and why?
No information = no help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I do not remember where I found the tutorial and the files, but the process is this:
1. Download http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZS570KL/UL-Z016-WW-4.12.40.1698-user.zip
2. Download https://mega.nz/#!tp9DSQ4b!3wdDLsh3BBtPju8G74xlDjLJ9QywFaoLs1T11mMt3QQ
3. Unzip FlashTools64_20161125.zip
4. Unzip UL-Z016-WW-4.12.40.1698-user.zip and move out files under firmware-update to FlashTools folder
5. Put downgrade.bat, boot.img, recovery.img to FlashTools folder
6. Reboot phone to bootloader and click downgrade.bat
The reason was to swap the conventional root SU through the Magisk. I tried to reinstall 7 just by replacing the original recovery available here in XDA, but the process was not going to restart, so I followed that one to try to return and reinstall everything. It worked, I got back to 6, but I did not know everything. It looks like a computer without the drivers installed.
I'd downgrade again, if it was me, this time I'd install a stock Rom (MM) from ASUS. Then test everything again. If everything is good to go then I'd root and upgrade.
Changing the OS in the middle doesn't help if you have a problem.
Especially if it just builds upon the foundations of the previous OS...
Did you flash a complete N rom or do an update?
The ROMs I try are exactly those of the Asus site. I tried the downgrade again to version 4.12.40.1698 and realized something when I flash in recovery mode. The following error messages appear:
Unmount of /firmware failed: no such volume
Mount: failed to mount /dev/block/bootdevice/by-name/mdtp at /firmware: No such file or directory
Unmount of /firmware failed, no such volume
What is it? How to solve?
I need the original kernel and recovery of the latest firmware released, can anyone make it available?
AndreSantoro84 said:
I need the original kernel and recovery of the latest firmware released, can anyone make it available?
Click to expand...
Click to collapse
These recovery images are from nenebear59, thanks to him !
Z016-WW-5.14.44.2212_recovery :
For 2.15GHz CPU
For 2.4GHz CPU
Thank you very much! Now I need the "persist.img" file, of the same rom, can you make it available? I thank you!
I downloaded the source code kernel from the Asus site, and the compressed file has a sensor folder. I downloaded the kernel zip file to my memory card and tried to install via recovery, however the following message appears: E: footer is wrong / E: signature verification failed. How do I get install by recovery or via flash in cmd?
I followed this tutorial (https://forum.xda-developers.com/oneplus-one/help/fix-brickloop-audio-fx-fc-efs-corrupt-t2879061) and managed to recover the fingerprint reader, but the others are still turned off. I really need the correct file! Somebody help me, please!
I got it! I used the persist.img of the global rom of the Xiaomi Mi Mix and the sensors came back! Apparently it's a universal file that caters to any device. You can close the topic!
Hi.. i intend to downgrade my asus Zenfone 3 Deluxe to lollipop, can you upload files needed to repair issues please?
thank you!
equinoks said:
Hi.. i intend to downgrade my asus Zenfone 3 Deluxe to lollipop, can you upload files needed to repair issues please?
thank you!
Click to expand...
Click to collapse
Really??
Ryder. said:
Really??
Click to expand...
Click to collapse
sorry from nougat to marshmallow
There isn't android lollipop for the asus zenfone 3 series. They came out with marshmallow.
AndreSantoro84 said:
I got it! I used the persist.img of the global rom of the Xiaomi Mi Mix and the sensors came back! Apparently it's a universal file that caters to any device. You can close the topic!
Click to expand...
Click to collapse
HELLO! I'm having a similar issue. 5 times my Zs570kl end up stuck in Asus logo boot screen after being charging all night (with alarming overheating) . I had to wipe the device with factory reset every time to get it working again. Last time, when finally booted up, all sensor were off, and I couldn't make them work no matter how much I try factory reseting again. I think i could try to install the persist.img file you mention, could you help me to find it? Thanks so much in advance for your help.
Asus Z016D (ZS570KL) 2.15 SKU WW_user_5.15.44.2562 build
equinoks said:
Hi.. i intend to downgrade my asus Zenfone 3 Deluxe to lollipop, can you upload files needed to repair issues please?
thank you!
Click to expand...
Click to collapse
Come on. To downgrade, you need to download the official rom from the Asus website (version WW-4.12.40.1698 - do not forget to check if your device is 2.15 or 2.4 ghz). Downloaded, need to put the rom inside a micro sd card (can not be internal storage, need to be in sd). In addition, it must be with the original recovery (the version is indifferent), if it is in TWRP it will not work. Once you have done this, you will have access to recovery mode, go to the "install zip from sd card" option, locate the zip file of the rom and install it, and just wait. Having problems, report here.
cazadormoron said:
HELLO! I'm having a similar issue. 5 times my Zs570kl end up stuck in Asus logo boot screen after being charging all night (with alarming overheating) . I had to wipe the device with factory reset every time to get it working again. Last time, when finally booted up, all sensor were off, and I couldn't make them work no matter how much I try factory reseting again. I think i could try to install the persist.img file you mention, could you help me to find it? Thanks so much in advance for your help.
Asus Z016D (ZS570KL) 2.15 SKU WW_user_5.15.44.2562 build
Click to expand...
Click to collapse
Hello! To reinstall the sensors is very simple (both work to find out the way, but then it gets simple hahaha). Download the adb files (it is available here in the forum, and inside the folder put the persist.img that I will make available here.) Access the fastboot mode on the device, connect to the computer, and open the command prompt inside the folder. Open the CMD, type the following command line: fastboot flash persist persist.img and press enter. The file will be rewritten and after that the sensors will be reconfigured. Restart the device. Having problems, report here.
Solved!
AndreSantoro84 said:
Hello! To reinstall the sensors is very simple (both work to find out the way, but then it gets simple hahaha). Download the adb files (it is available here in the forum, and inside the folder put the persist.img that I will make available here.) Access the fastboot mode on the device, connect to the computer, and open the command prompt inside the folder. Open the CMD, type the following command line: fastboot flash persist persist.img and press enter. The file will be rewritten and after that the sensors will be reconfigured. Restart the device. Having problems, report here.
Click to expand...
Click to collapse
THANK YOU ANDRE!!! I'm really really happy to tell you that everything worked PERFECTLY. I wasn't sure if I need to unlock the bootloader and flash root first, so I tried to do it. I've been able to unlock the bootloader, but for some reason, when I flash the bootroot.img following the instructions from this post - https://forum.xda-developers.com/ze...v-liftoff-zs570klpro-official-unlock-t3557276 -, I get the asus logo boot loop. Anyway, without the root I flash the persist file and, as you said, all the sensors were reconfigured.
Again, muito muito obrigado!!!
cazadormoron said:
THANK YOU ANDRE!!! I'm really really happy to tell you that everything worked PERFECTLY. I wasn't sure if I need to unlock the bootloader and flash root first, so I tried to do it. I've been able to unlock the bootloader, but for some reason, when I flash the bootroot.img following the instructions from this post - https://forum.xda-developers.com/ze...v-liftoff-zs570klpro-official-unlock-t3557276 -, I get the asus logo boot loop. Anyway, without the root I flash the persist file and, as you said, all the sensors were reconfigured.
Again, muito muito obrigado!!!
Click to expand...
Click to collapse
If you want to root, flash the twrp and then supersu zip from twrp
NOTE:
this method is only for Honor6X and GR5-2017 Devices.
I am not responsable for any other damage:
**losing serial number,imei, or any other problem.**
this one will force to unlock bootloader code and FRP,and all your data will be erased.
it will help you to debrand to other regions easily.
************************************************************
you need at first this files:
-HL2BLNTMBD001051*
-HONOROEMINFO
-DRIVER HANDSET*
-IMAGE DOWNLOADER*
----------------------
1-Preparing files:
-exrtract all files below?
-then install driver :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-once installed open IDT and follow the steps :
-then browse in folder HL2BLNTMBD001051 and select :
----------------------
2-In the side of the phone :
-you have to open your phone to work on the motherboard :
-you need an object to touch the testpoints of the motherboard (Everything who's metallic can serve you)
-make sur that you press testpoints, then hold and put usb cable in the same time:
-[if phone turn on, turn it off and make sur that you contact between testpoints]
-you will see in the computer Your device is detected as(Huawei USB COM1.0)
if not, reinstall driver and reboot the computer.
----------------------
3-Runnig the work :
-now click on (play) button in IDT. [ you will see that the progression has started].
-once progression finished,go to the next step(4)
-if it fail..don't panic.
just flash SYSTEM.img manually with fastboot (system.img he is in fastbootimage folder).
----------------------
4-finishing:
-now your phone start working as factory mode,
reboot fastboot and flash any oeminfo file given or of your choice.
-once again done.
the last thing to do is update your firmware with eRecovery or by dload method (launching software upgrade app)
----------------------
Done :good: say thanks?
player615 said:
NOTE:
this method is only for Honor6X and GR5-2017 Devices.
I am not responsable for any other damage:
**losing serial number.or any other problem.**
this one will force to unlock bootloader code and FRP,and all your data will be erased.
it will help you to debrand to other regions easily.
************************************************************
you need at first this files:
-HL2BLNTMBD001051*
-HONOROEMINFO
-DRIVER HANDSET*
-IMAGE DOWNLOADER*
----------------------
1-Preparing files:
-exrtract all Zipped files below.
-then install driver :
-once installed open IDT and follow the steps :
-then browse in folder HL2BLNTMBD001051 and select :
----------------------
2-In the side of the phone :
-you have to open your phone to work on the motherboard :
-you need an object to touch the testpoints of the motherboard (Everything who's metallic can serve you)
-make sur that you press testpoints, then hold and put usb cable in the same time:
-[if phone turn on, turn it off and make sur that you contact between testpoints]
-you will see in the computer Your device is detected as(Huawei USB COM1.0) if not, reinstall driver and reboot the computer.
----------------------
3-Runnig the work :
-now click on (play)button in IDT.[ you will see that the progression has started].
-once progression finished,go to the next step(4)
-if it fail..don't panic.just flash SYSTEM.img manually with fastboot(system.img he is in fastbootimage folder)
----------------------
4-finishing:
-now your phone start working as factory mode, reboot fastboot and flash any oeminfo file given or of your choice.
-once again done.the last thing to do is update your firmware with eRecovery or by dload method (launching software upgrade app)
----------------------
Done :good:
Click to expand...
Click to collapse
Excellent guide. It will help a lot if people who are no longer under warranty (majority of us) and Don't mind Opening their phones. Great work. ???
Mannan Qamar said:
Excellent guide. It will help a lot if people who are no longer under warranty (majority of us) and Don't mind Opening their phones. Great work.
Click to expand...
Click to collapse
Thank you bro,?
player615 said:
NOTE:
this method is only for Honor6X and GR5-2017 Devices.
I am not responsable for any other damage:
**losing serial number.or any other problem.**
this one will force to unlock bootloader code and FRP,and all your data will be erased.
it will help you to debrand to other regions easily.
************************************************************
you need at first this files:
-HL2BLNTMBD001051*
-HONOROEMINFO
-DRIVER HANDSET*
-IMAGE DOWNLOADER*
----------------------
1-Preparing files:
-exrtract all Zipped files below.
-then install driver :
-once installed open IDT and follow the steps :
-then browse in folder HL2BLNTMBD001051 and select :
----------------------
2-In the side of the phone :
-you have to open your phone to work on the motherboard :
-you need an object to touch the testpoints of the motherboard (Everything who's metallic can serve you)
-make sur that you press testpoints, then hold and put usb cable in the same time:
-[if phone turn on, turn it off and make sur that you contact between testpoints]
-you will see in the computer Your device is detected as(Huawei USB COM1.0) if not, reinstall driver and reboot the computer.
----------------------
3-Runnig the work :
-now click on (play)button in IDT.[ you will see that the progression has started].
-once progression finished,go to the next step(4)
-if it fail..don't panic.just flash SYSTEM.img manually with fastboot(system.img he is in fastbootimage folder)
----------------------
4-finishing:
-now your phone start working as factory mode, reboot fastboot and flash any oeminfo file given or of your choice.
-once again done.the last thing to do is update your firmware with eRecovery or by dload method (launching software upgrade app)
----------------------
Done :good:
Click to expand...
Click to collapse
Thanks brother
Diego Intriago said:
Thanks brother
Click to expand...
Click to collapse
You are welcome?
WOW
thanks lot dear you give new life of my phone that was dead over a year. its really works
:fingers-crossed::fingers-crossed::fingers-crossed:
mirzafaisal said:
thanks lot dear you give new life of my phone that was dead over a year. its really works
:fingers-crossed::fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Your welcome?
Thank you very muchhhhh. I wait 14 month to fix this. I love youu.
It will unlock bootloader?
Mohit0033 said:
It will unlock bootloader?
Click to expand...
Click to collapse
yes
i need you help
Hi, I do the steps but when it reboots, it goes into fastboot mode or downloaded in step 3, what can I do? How do I install system manually?
thanks phone back to work again
BUT HOW TO WRITE OEMINFO FROM FASTBOOT
iguana22 said:
Hi, I do the steps but when it reboots, it goes into fastboot mode or downloaded in step 3, what can I do? How do I install system manually?
Click to expand...
Click to collapse
Flash it with fastboot i puted in guide the location of this partition..
ahwak said:
thanks phone back to work again
BUT HOW TO WRITE OEMINFO FROM FASTBOOT
Click to expand...
Click to collapse
Like others commands recovery or boot... Just change the name of partition that you want to flash
Fastboot flash oeminfo ....
player615 said:
Flash it with fastboot i puted in guide the location of this partition..
Click to expand...
Click to collapse
if I flash the system that is in the folder fasbootimage with adb it says it completes but it re-enters dowload mode when it restarts my cell phone is an honor 6x bln l21 what can I do?
iguana22 said:
if I flash the system that is in the folder fasbootimage with adb it says it completes but it re-enters dowload mode when it restarts my cell phone is an honor 6x bln l21 what can I do?
Click to expand...
Click to collapse
Repeat flash steps then flash system and do factory reset
player615 said:
Repeat flash steps then flash system and do factory reset
Click to expand...
Click to collapse
hello I did all the steps again and at the end factory reset and it stays again in fastboot can I install the app from the edl mode?
iguana22 said:
hello I did all the steps again and at the end factory reset and it stays again in fastboot can I install the app from the edl mode?
Click to expand...
Click to collapse
If you can boot erecovery just update with Otg or use sdcard, system partition don't needed at all...
player615 said:
If you can boot erecovery just update with Otg or use sdcard, system partition don't needed at all...
Click to expand...
Click to collapse
I can not enter the Erecovery mode Just enter the recovery mode with the USB cable connected to the PC and the button upwards will restart continuously maybe that's why? and arrives at 5 the update by sd when I press the 3 buttons and fail
player615 said:
If you can boot erecovery just update with Otg or use sdcard, system partition don't needed at all...
Click to expand...
Click to collapse
could install the twrp and then install some rom or custom rom? which one could I use?
UNLOCKING YOUR PHONE WILL ERASE ALL OF YOUR DATA, SO MAKE A BACKUP OF YOUR DATA TO EITHER PC OR EXTERNAL SD CARD.
Hi All, I'm summarizing all steps required for BL unlock, TWRP and rooting our Realme 5 Pro(tested with Indian variant).
I'm not the Owner of any file required in this guide. So credit goes to real developer/maintainer of these files/patches/mods.:fingers-crossed::fingers-crossed:
Unlocking: Follow below steps one by one. Updated for Realme UI too.
1. Download and install the unlock tool apk on your phone. download apk from below:
a. For Color Os-> Depth test file
b. For Realme Ui ->Depth test file
2. Follow the detailed steps below to unlock the bootloader.
a. Open unlock tool.
b. Click “Start applying”.
c. Please read the disclaimer in detail, select the checkbox, and submit your application.
d. The application will be checked by realme servers.
e. Within approximately 1 hour, the unlock tool apk will show the status of the unlock request - if it shows the unlocking is successful, please proceed to the following step.
f. You can now click “Start the in-depth test” and the device will reboot automatically.
3. Download the ADB tool and after extracting zip file open folder minimal_adb_fastboot in PC.
a. Click on file “cmd-here” to open command prompt (CMD) or you can manually open CMD by holding Shift key and Right-click on the screen to open command prompt window.
b. In CMD type- “fastboot devices” and press enter to verify that your device is being detected. If not, install ADB drivers first or reconnect your phone to a different port of PC then try again.
c. In CMD type- “fastboot oem unlock” and press enter to unlock the bootloader.
d. Now on phone, a message like in below image will appear. In phone select the "unlock the bootloader" menu by pressing the volume button down and then press the “power button” to finally unlock the bootloader of phone.
e. After pressing the power button your phone will boot into Color OS by wiping phone and bootloader is now unlocked.
Click to expand...
Click to collapse
TWRP(Recovery installing): Follow below steps one by one.
--- Very Imp **** take a complete backup of the phone just after booting into twrp using this guide ****
1. The bootloader of your phone must be unlocked.
2. Download TWRP and Vbmeta.img file and rename TWRP file to “twrp.img” and copy both files to folder “minimal_adb_fastboot”
3. Power off the phone then press and hold the VOLUME DOWN button with POWER button for 3 seconds and your phone will be booted into bootloader mode.
4. Click on file “cmd-here” in folder minimal_adb_fastboot to open the command prompt (CMD)
5. Follow step 3.b of Unlocking method to check that phone is connected with the PC properly.
6. In CMD type- “fastboot flash recovery twrp.img” to flash TWRP and wait for the confirmation screen/message.
7. Now in CMD type- "fastboot flash vbmeta vbmeta.img" to flash vbmeta file.
8. After flashing vbmeta, follow below final steps.
a. In phone press volume down button to select “Recovery mode”
b. Press the power button to boot in recovery.
c. A message “Unmodified System Partition” will appear and uncheck menu “Never Show……..” and Swipe to allow modification.
d. Make a backup of all partitions to an external sd card.
e. From twrp reboot to recovery first and then reboot to the system.
Click to expand...
Click to collapse
Rooting: Follow below steps one by one.
--- Very Imp ****TWRP must be installed in your phone otherwise follow the above steps to install TWRP****
1. Make a backup first using TWRP before proceeding to the next steps.
2. Download the latest Stable Magisk version and Stable Magisk Manager. Link to Magisk+Manager.
3. (You can skip this step if you are on RUI) Download Magisk fix and Redblink Patch(SystemUI) file.
4. Copy all 4 (2 files from step 2, if you are on RUI) files downloaded above to either external sd card or internal memory.
5. Power off the phone then press and hold the VOLUME DOWN button with POWER button for 3 seconds and your phone will be booted into bootloader mode.
6. Press the volume down button to select “Recovery Mode” and press the power button to boot in recovery.
7. Now follow below final steps:
a. In TWRP recovery navigate and Flash Magisk file.
b. (Skip this step if you are on RUI) Flash Magisk patch file and reboot phone to system.
c. (Skip this step if you are on RUI) To fix the red blinking issue(rooted warning) in status bar of phone, follow steps 6 and 7 of this guide and flash SystemUI patch file and reboot.
d. If Magisk manager is missing in the app drawer of your phone(rooted+magisk flashed) then install magisk manager file downloaded in step 3 of rooting method.
e. If Magisk manager showing core mode only then uncheck "magisk core only mode" in the setting of magisk and reboot your phone.
Click to expand...
Click to collapse
Back to Stock, UNBRICK and Fastboot Flash: Follow below steps one by one. INDIAN VARIANT ONLY
1. Follow this guide to flash stock Colour os again on a rooted stock os, any custom rom flashed phone and phone booting to recovery only.
2. Download fastboot firmware from here. Indian Variant only.
3. Download platform-tools from here and extract to drive in your PC.
4. Extract downloaded fastboot firmware zip file and copy all files to platform tool folder.
5. Download Vbmeta.img file and replace with existing Vbmeta.img in platform folder(where firmware was extracted).
6. Open CMD by holding Shift key and Right-click on the PC to open command prompt window.
7. Power off the phone then press and hold the VOLUME DOWN button with POWER button for 3 seconds and your phone will be booted into bootloader mode and Follow step 3.b of Unlocking method to check that phone is connected with the PC properly.
8. Execute below commands one by one.
fastboot -w && fastboot erase system
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash vbmeta vbmeta.img
fastboot reboot
Now your phone is back to stock Color os again. Follow above TWRP and ROOT methods if you wants to root your stock os again.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
All In One Link to all files required above.
Credits:
@thesprintster & @BabluS for recovery and vbmeta.
@topjohnwu for magisk.
:good:Don't forget to Click Thank's, if this guide helps.:good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi RMX1971 mediante Tapatalk
4. Download Redblink Patch(SystemUI)
its for realme5pro? becouse the firmware only A09 and A11
SystemUI_Patched_A19.zip ???
have u ever flash it
pocepoke said:
4. Download Redblink Patch(SystemUI)
its for realme5pro? becouse the firmware only A09 and A11
SystemUI_Patched_A19.zip ???
have u ever flash it
Click to expand...
Click to collapse
Yes. I have tried all files in this guide for my Realme 5Pro Indian variant. No issues till now. I have manually upgraded my phone from A09 to A11 then tried all above steps.
Kaushikradhey said:
Yes. I have tried all files in this guide for my Realme 5Pro Indian variant. No issues till now. I have manually upgraded my phone from A09 to A11 then tried all above steps.
Click to expand...
Click to collapse
thx a lot,
i will tried upgrade to A11, couple days ago there isnt any upgrade to A11 from realme server indonesia
3. Download the latest Stable Magisk version and Stable Magisk Manager. Link to Magisk+Manager. ( https://drive.google.com/file/d/16CnHbb6s2vhnkYGc4nb2WIUgOnHkp5X4/view )
i think its wrong link there no magisk just minimal_adb_fastboot_1.4.3_portable.zip
e. If Magisk manager showing core mode only then uncheck "magisk core only mode" in the setting of magisk and reboot your phone.
i follow your guide for rooting but magisk core only mode even i disable the core only mode when restart it come back to core only mode, im using magisk v20 zip
im on colorOS 6 v11 rightnow
Has any anybody with the european version of this phone been able to unlock it?
I have tried with both A09 and A11 firmware, but it always says that my phone model is not supported by in-depth test.
tonibm19 said:
Has any anybody with the european version of this phone been able to unlock it?
I have tried with both A09 and A11 firmware, but it always says that my phone model is not supported by in-depth test.
Click to expand...
Click to collapse
I'm from Spain, and I can't unlock it, I will call to Realme if I can because I want unlock it.
Enviado desde mi RMX1971
tonibm19 said:
Has any anybody with the european version of this phone been able to unlock it?
I have tried with both A09 and A11 firmware, but it always says that my phone model is not supported by in-depth test.
Click to expand...
Click to collapse
Josegames all said:
I'm from Spain, and I can't unlock it, I will call to Realme if I can because I want unlock it.
Enviado desde mi RMX1971
Click to expand...
Click to collapse
is there european version?
as far i know is only 2 version, rm5pro India (global) realme Q (china)
mybe u can change region on settings -> language & region to mybe unloked region like india or like me indonesia
im using relame5pro and realme2pro (wife ) it can be unlocked easy when the unlock application is out from realme
pocepoke said:
is there european version?
as far i know is only 2 version, rm5pro India (global) realme Q (china)
mybe u can change region on settings -> language & region to mybe unloked region like india or like me indonesia
im using relame5pro and realme2pro (wife ) it can be unlocked easy when the unlock application is out from realme
Click to expand...
Click to collapse
I tried, but I can't, it's really uncomfortable, so I sent an email to Realme...
Enviado desde mi RMX1971
Thereis bug in Color OS 6 RMX1971EX_11_A.11
Cant get into fastboot, only show fastboot logo then automatically reboot
Hi dears.
Im from Spain too, and I cant Open Bootloader. I have tried a.9 and a.11 version, but both of them appear "model is not supported by in-depth test".
Im waiting for new Update or help to unlock and delete Color OS.
Thanks for all
I bricked phone
I bought my phone in India so I presume that it is indian variant. First installed TWRP and LOS and everything was ok. Then tried with magisk but got ERROR 1 cannot mount system. So I taught that maybe flashing the latest firmware will change something. So I flashed firmware. And brick. I attach photos. Please kindly help me
https://www.photobox.co.uk/my/photo?photo_id=502381335672&album_id=5753911027
https://www.photobox.co.uk/my/photo?album_id=5753911027&photo_id=502381334149
https://www.photobox.co.uk/my/photo?photo_id=502381334736&album_id=5753911027
FIXED
I unbricked the device by "unbrick" guide
But why there is problem with flashing magisk?
Hi all. I'm considering buying this phone but bootloader & root is a must.
It's possible to unlock bootloader in the EU (global) version? I read that EU and India versions are the same but I'm not 100% sure about this.
Does anyone from Europe unlocked it?
Regards
Like_Gg said:
Hi all. I'm considering buying this phone but bootloader & root is a must.
It's possible to unlock bootloader in the EU (global) version? I read that EU and India versions are the same but I'm not 100% sure about this.
Does anyone from Europe unlocked it?
Regards
Click to expand...
Click to collapse
Can't unlock in Europe, just wait...
Enviado desde mi RMX1971
Josegames all said:
Can't unlock in Europe, just wait...
Enviado desde mi RMX1971
Click to expand...
Click to collapse
Will it be unlocked someday?
I have indian version n trying to unlock bootloader...after trying indept apk...its shows success review but it doesn't goes to fastboot mode...its reboot to system...why...please help
O E M unlock
In my Indian Rm5P /Settings/Additional Settings/Developers Options there is a provision for enabling O E M Unlock.What is this meant for? Whether I have to enable this before starting the in-depth tool?Or whether the BootLoader will be unlocked automatically if I enable this?
---------- Po
If I unlock bootloader and flash TWRP, this TWRP can be used as my stock recovery further flashing zips(not custom ROMs)? Also will Bank apps work in this set up without any problems?
official post from realme :
https://c.realme.com/in/post-detail...64863306907648&subForumId=1163757213450240000
WARNINGS:
Keep your backup files safe and secure ! If you can, encrypt them.
If you try to flash in "firmware upgrade" mode, bootloader will be LOCKED again !
Never try to flash in "format all" mode ! Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
Never try to share your backups or your security and privacy will be compromised.
USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR ACTIONS.
Did you have any other error not mentioned here ?
Just attach the screenshot of the error and explain some what you did to get this error and we will try to help.
Good luck !
Error: "LIB DA not match"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are facing this issue, you have three solutions for that error:#1. Try on Linux.#2. Download an older version of the SP Flash Tool. See "Alternative Downloads" in this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/#3. Uncheck "LIB DA match" in the Options. Check step #10 of this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/
Error: "PMT changed for the ROM"
Firstly, NEVER try to flash in "format all" mode !Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.If you are facing "PMT changed" message, your device has an older scatter file inside it.This is because there is any modification to the scatter file you are using to the scatter file used before.There are some minor changes from scatter file of the MIUI 11 to the scatter file of MIUI 12, but nothing significant. You can ignore it.You have two solutions for that error:#1. Use the same scatter file present on the device.#2. Flash using "firmware upgrade" mode and a new PMT will be written.But, if you flash using "firmware upgrade" mode, bootloader will be LOCKED again and userdata will be ERASED.If you want, you can backup the state of unlocked bootloader BEFORE the "firmware upgrade" and then restore it after.Just follow this guide before the "firmware upgrade": https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Error: "STATUS_BROM_CMD_STARTCMD_FAIL"
Just simple try to boot/reboot your device.Once is enough.It will refresh the download/EDL mode.
Error: "STATUS_SEC_AUTH_FILE_NEEDED"
If you are facing this error, you are trying to flash using EDL mode.Firstly, try to flash in download mode and not in EDL mode.Just connect the powered off device without press any key.If you want to flash in EDL mode, you need to bypass authentication.Just follow this guide: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229679/
Error: "STATUS_BROM_CMD_FAIL"
If you are facing this error, you are trying to flash using EDL mode.Firstly, try to flash in download mode and not in EDL mode.Just connect the powered off device without press any key.If you want to flash in EDL mode, you need to bypass authentication.Just follow this guide: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229679/
Error: "STATUS_BROM_CMD_SEND_DA_FAIL"
Just use the properly DA (Download-agent) file for MERLIN devices.Here you can find DA files for MERLIN: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209765/
Error: "STATUS_EXT_RAM_EXCEPTION"
Firstly, NEVER try to flash in "format all" mode !Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.If you are facing "EXT RAM Exception" message, probably your device is DEAD or uncompatible with ROM variant.Just Flash using the "FIRMWARE UPGRADE" mode and your device will be alive again.If you flash using "firmware upgrade" mode, bootloader will be LOCKED again and userdata will be ERASED.If you want, you can backup the state of unlocked bootloader BEFORE the "firmware upgrade" and then restore it after.Just follow this guide before the "firmware upgrade": https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
Hi @VD171
I've tried u'r method for Error: "STATUS_EXT_RAM_EXCEPTION"
but still my devices wont turn on. Do you have any suggestion?
langithitam said:
Hi @VD171
I've tried u'r method for Error: "STATUS_EXT_RAM_EXCEPTION"
but still my devices wont turn on. Do you have any suggestion?
Click to expand...
Click to collapse
Did you flash the original stock MIUI again using the FIRMWARE UPGRADE mode?
VD171 said:
Did you flash the original stock MIUI again using the FIRMWARE UPGRADE mode?
Click to expand...
Click to collapse
Yes i did. I even flash the global & chinese ROM, but still gave me that error message
langithitam said:
Yes i did. I even flash the global & chinese ROM, but still gave me that error message
Click to expand...
Click to collapse
So, I'm not sure.
You need to keep trying everything you can.
That's just an ocasionally error.
Hi guys, i flashed with sp flash tool but i failed formating all and now i dont have IMEI
Now i just read your advice
Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
What can i do now? I am in 12.0.8 and cant unlock bootloader because i cant add miui account and cant use the phone because google verification..
I now what my imei is because i have the box of the phone can i do something?
Thx for the help
Montaal said:
Hi guys, i flashed with sp flash tool but i failed formating all and now i dont have IMEI
Now i just read your advice
Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
What can i do now? I am in 12.0.8 and cant unlock bootloader because i cant add miui account and cant use the phone because google verification..
I now what my imei is because i have the box of the phone can i do something?
Thx for the help
Click to expand...
Click to collapse
You need to recover your imei writing that using modem meta and engineering room.
Good luck
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
XdaInsiderAndDev said:
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
Click to expand...
Click to collapse
Thank you very much for your contribution.
I love MediaTek
Thanks, I will be providing source-code of new lines of SoC to the community. I really love the possibility to customize your Android and it's not fair that MediaTek is not providing source code officially. I will see if I can do more for more MTK devices.
Note: Originally we used SP Flash Tool to flash stock software, now that we don't use it anymore, we gave it to you but I didn't remember they included the option CHECK LIB DA MATCH for you to not be able to modify the stock software DRAM values. Sorry for that.
And I love how the community always find a way to customize their Androids.
XdaInsiderAndDev said:
Thanks, I will be providing source-code of new lines of SoC to the community. I really love the possibility to customize your Android and it's not fair that MediaTek is not providing source code officially. I will see if I can do more for more MTK devices.
Note: Originally we used SP Flash Tool to flash stock software, now that we don't use it anymore, we gave it to you but I didn't remember they included the option CHECK LIB DA MATCH for you to not be able to modify the stock software DRAM values. Sorry for that.
And I love how the community always find a way to customize their Androids.
Click to expand...
Click to collapse
Thank you for the opportunity to know a little about the technical part.
We rarely have this chance, as it depends on its own experience and generosity in sharing.
XdaInsiderAndDev said:
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
Click to expand...
Click to collapse
here the same error persists
Hi people thankyou for everything but the issue is not solved. Error: "STATUS_EXT_RAM_EXCEPTION" The same error is coming again and again. Mobile REALME C11 Purchased 2020. Tried ROMS { REALME_C11_RMX2185_11_A.109_220801 --- REALME_C11_2021_RMX3231_11.A.87_202208171849 --- RMX2185_11_A.69_200812} Mobile in red state.
My bootloader was unlocked before But I thought I should lock it again so I use this post (https://c.realme.com/in/post-details/1365228796868915200)
Commands {
- Enter the command: adb reboot bootloader
- Press “Enter” on your keyboard
- Enter the command: fastboot flashing lock
- Press “Enter” on your keyboard
}
There is a catch after that there I use one extra command fastboot reboot
After that I am just surfing the internet. Approx all methods I tried. Please Help
XdaInsiderAndDev said:
Thanks, I will be providing source-code of new lines of SoC to the community. I really love the possibility to customize your Android and it's not fair that MediaTek is not providing source code officially. I will see if I can do more for more MTK devices.
Note: Originally we used SP Flash Tool to flash stock software, now that we don't use it anymore, we gave it to you but I didn't remember they included the option CHECK LIB DA MATCH for you to not be able to modify the stock software DRAM values. Sorry for that.
And I love how the community always find a way to customize their Androids.
Click to expand...
Click to collapse
hello sir, i want to disable check lib da in sptool console mode but i can't find any solution its still throwing me check lib da match error even i turn it off in option in sptool
XinextialMatrix said:
hello sir, i want to disable check lib da in sptool console mode but i can't find any solution its still throwing me check lib da match error even i turn it off in option in sptool
Click to expand...
Click to collapse
As I know, in console mode is, if not impossible, very hard to do that, however I would have to talk with my friend which helped in the creation of SP Flash Tool (known as flash_tool internally).
All I can recommend is using the latest version available on the web and running it in Windows 10 21H1 or above, as administrator and using the GUI for disabling CHECK LIB DA MATCH, unfortunately, I can't provide flash_tool for linux because of my contract.
if you are still facing this message STATUS_EXT_RAM_EXCEPTION format running 0 prcent, it may your emmc is corrupted,
XdaInsiderAndDev said:
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
Click to expand...
Click to collapse
I don't see the DA file in my fastboot rom, could it be called something else
VD171 said:
WARNINGS:
Keep your backup files safe and secure ! If you can, encrypt them.
If you try to flash in "firmware upgrade" mode, bootloader will be LOCKED again !
Never try to flash in "format all" mode ! Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.
Never try to share your backups or your security and privacy will be compromised.
USE AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR YOUR ACTIONS.
Did you have any other error not mentioned here ?
Just attach the screenshot of the error and explain some what you did to get this error and we will try to help.
Good luck !
Error: "LIB DA not match"
If you are facing this issue, you have three solutions for that error:#1. Try on Linux.#2. Download an older version of the SP Flash Tool. See "Alternative Downloads" in this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/#3. Uncheck "LIB DA match" in the Options. Check step #10 of this guide: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4229937/
Error: "PMT changed for the ROM"
Firstly, NEVER try to flash in "format all" mode !Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.If you are facing "PMT changed" message, your device has an older scatter file inside it.This is because there is any modification to the scatter file you are using to the scatter file used before.There are some minor changes from scatter file of the MIUI 11 to the scatter file of MIUI 12, but nothing significant. You can ignore it.You have two solutions for that error:#1. Use the same scatter file present on the device.#2. Flash using "firmware upgrade" mode and a new PMT will be written.But, if you flash using "firmware upgrade" mode, bootloader will be LOCKED again and userdata will be ERASED.If you want, you can backup the state of unlocked bootloader BEFORE the "firmware upgrade" and then restore it after.Just follow this guide before the "firmware upgrade": https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Error: "STATUS_BROM_CMD_STARTCMD_FAIL"
Just simple try to boot/reboot your device.Once is enough.It will refresh the download/EDL mode.
Error: "STATUS_SEC_AUTH_FILE_NEEDED"
If you are facing this error, you are trying to flash using EDL mode.Firstly, try to flash in download mode and not in EDL mode.Just connect the powered off device without press any key.If you want to flash in EDL mode, you need to bypass authentication.Just follow this guide: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229679/
Error: "STATUS_BROM_CMD_FAIL"
If you are facing this error, you are trying to flash using EDL mode.Firstly, try to flash in download mode and not in EDL mode.Just connect the powered off device without press any key.If you want to flash in EDL mode, you need to bypass authentication.Just follow this guide: https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229679/
Error: "STATUS_BROM_CMD_SEND_DA_FAIL"
Just use the properly DA (Download-agent) file for MERLIN devices.Here you can find DA files for MERLIN: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4209765/
Error: "STATUS_EXT_RAM_EXCEPTION"
Firstly, NEVER try to flash in "format all" mode !Otherwise, you will LOSE all secure and identifying infos for your device. Like IMEI and MAC.If you are facing "EXT RAM Exception" message, probably your device is DEAD or uncompatible with ROM variant.Just Flash using the "FIRMWARE UPGRADE" mode and your device will be alive again.If you flash using "firmware upgrade" mode, bootloader will be LOCKED again and userdata will be ERASED.If you want, you can backup the state of unlocked bootloader BEFORE the "firmware upgrade" and then restore it after.Just follow this guide before the "firmware upgrade": https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4220013/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4225163/
Click to expand...
Click to collapse
Sir, can you help me?
My phone is Redmi Note 9 Merlin. I initially experienced a bootloop after updating the ROM via twrp, then I tried to unbrick it using the MTK Auth Bypasstool and FlashTool. When using FlashTool, I got the error "Sp Flash Tool Error : Status_Ram_Exception (0xC0050005)" so I tried the method from the beginning, namely using MTK Auth Bypasstool, but it didn't work. My phone won't even turn on. I really ask for your help
RogerRedminote9 said:
Sir, can you help me?
My phone is Redmi Note 9 Merlin. I initially experienced a bootloop after updating the ROM via twrp, then I tried to unbrick it using the MTK Auth Bypasstool and FlashTool. When using FlashTool, I got the error "Sp Flash Tool Error : Status_Ram_Exception (0xC0050005)" so I tried the method from the beginning, namely using MTK Auth Bypasstool, but it didn't work. My phone won't even turn on. I really ask for your help
Click to expand...
Click to collapse
lol, my phone just out off battery
XdaInsiderAndDev said:
Hi, I'm a MediaTek LTD and MediaTek Inc engineer.
I will remain anonymous using my son's account.
MediaTek MT6765 has a problem with DRAM when flashing with generic DA library. This makes the error STATUS_EXT_RAM_EXCEPTION to appear on SP flash tool. We provide the generic DA libs for development-only instances, but the companies like Xiaomi make modifications to the Scatter and DA lib file. This is the solution:
1. Download fastboot rom for your device (not the recovery one, it should weight 3 - 4GB)
2. Unpack it
3. Open SP Flash Tool, go to Options > General and deactivate CHECK LIB DA MATCH
4. Now load the DA file from the rom of your device
5. Load the Scatter file from the rom of your device
6. Select Firmware Upgrade mode
7. Start download
8. Connect your device with a USB cable (disconnected battery) and enter into MTK Flash Mode
Solved!
Sincerely
An unknown engineer from MediaTek Engineering Department
Click to expand...
Click to collapse
Everything works, you saved my phone! Thank you very much and good luck to everyone !!