Hi everyone, I wanted to know if this problem was related to a software problem or is it my a52s broken something in hardware
when i connect a cable type-c both side on my pc the data when i connect the mobile phone to a type c port on my pc the peripheral connects and disconnects in quick succession, this only happens when i connect it to a supported type-c port
I have done several tests and I can confirm that the problem is the cell phone, with another cell phone the problem does not exist and I can reach the classic speeds of the type-c gen 2
currently the a52s mobile phone is equipped with android 11 with the one ui 3.1 with root
if someone can do some tests and verify the correct functioning of the port, I kindly ask you to write if you are on android 11 or android 12 with or without root permissions, thank you very much
Try playing with Developer options usb options.
If Developer options are already on, temporarily turn off.
Check Windows Event Viewer for error messages.
blackhawk said:
Try playing with Developer options usb options.
If Developer options are already on, temporarily turn off.
Check Windows Event Viewer for error messages.
Click to expand...
Click to collapse
already check this, on or off the dev option don't change anything. i try also the code *#0808# to change the parameters of the usb, but nothing, the problem still on.
raffybest94V01 said:
already check this, on or off the dev option don't change anything. i try also the code *#0808# to change the parameters of the usb, but nothing, the problem still on.
Click to expand...
Click to collapse
Event Viewer?
raffybest94V01
Did you conected the a52s to another pc to se if the result is the same???
TTmouse said:
raffybest94V01
Did you conected the a52s to another pc to se if the result is the same???
Click to expand...
Click to collapse
i don't have another pc with type c gen 2.
blackhawk said:
Event Viewer?
Click to expand...
Click to collapse
can you give me some apk for the event viewer ?
raffybest94V01 said:
can you give me some apk for the event viewer ?
Click to expand...
Click to collapse
Event Viewer is part of Windows built in management tools...
raffybest94V01 said:
i don't have another pc with type c gen 2.
Click to expand...
Click to collapse
According to the GSMArena listing for this phone, the USB controller only supports USB 2.0 speeds. Assuming this is correct, you will not get better speeds depending on which port of your PC you connect to, no matter how great the PC-side port and/or cable might be.
Related
hi there
i am using the android os on my raphael and i simply love it....
i have one query
i want to access internet through my pc attaching the usb cable same as wm6.5 using activesync 4.5 on windows xp
how to access net through pc any software ? please help
and any software for linking pc with the phone like (active sync)
and all you guys you are doing a great job.....
im not so sure off this but i dont think that will work because the android sync's everything wireless like contacts and everything u might just wanna buy a router ?
There is a way to make your phone a wifi access point... it works, but slaughters the battery. I'm not aware of any way to tether it via USB currently...
I think there is this kind of software on linux, you might want to look into it a little bit to see if there is an android build...but I wound put too much hope on that....
there is no way possible on this right now not on usb because android on WinMo does not support usb connections so they being said there might not be a way to this now but in the future im sure our developers will work there way on getting usb working.
RoyalAndroid said:
there is no way possible on this right now not on usb because android on WinMo does not support usb connections so they being said there might not be a way to this now but in the future im sure our developers will work there way on getting usb working.
Click to expand...
Click to collapse
i think it does support , but only used as a debug function instead of mass storage
usb
naviru said:
i think it does support , but only used as a debug function instead of mass storage
Click to expand...
Click to collapse
that correct usb is only for charging and debugging right now
aarif_ziaee said:
hi there
i am using the android os on my raphael and i simply love it....
i have one query
i want to access internet through my pc attaching the usb cable same as wm6.5 using activesync 4.5 on windows xp
how to access net through pc any software ? please help
and any software for linking pc with the phone like (active sync)
and all you guys you are doing a great job.....
Click to expand...
Click to collapse
On a linux host you can use this guide
Hi,
I purchase my Samsung Note 10.1 2014 Edition last October. I've been using it to watch movie, playing game etc entertainment. I always transfer movie or drama to watch in the note from PC via USB Cable. Its been working well until early this week, the USB symbol is not showing up when I connect the USB cable to PC, and my PC did not detect the device as well.
Please help me on this problem.
How should I fix it?
theresa55 said:
Hi,
I purchase my Samsung Note 10.1 2014 Edition last October. I've been using it to watch movie, playing game etc entertainment. I always transfer movie or drama to watch in the note from PC via USB Cable. Its been working well until early this week, the USB symbol is not showing up when I connect the USB cable to PC, and my PC did not detect the device as well.
Please help me on this problem.
How should I fix it?
Click to expand...
Click to collapse
wrong forum.
but sounds like you need a new cable .yes a bad cable may or may not charge
i sent mod request to get youy post moved to right device forum where you can get more device specific help
erica_renee said:
wrong forum.
but sounds like you need a new cable .yes a bad cable may or may not charge
Click to expand...
Click to collapse
Thanks for the reply.
I try connect the cable to my samsung phone, it works fine though. Only my note cannot detect it.
theresa55 said:
Thanks for the reply.
I try connect the cable to my samsung phone, it works fine though. Only my note cannot detect it.
Click to expand...
Click to collapse
aww ok/ see the note 2012 has proprietary cable. and even after market cables often do not work right.
are you on stock firmware?
have you tried another pc?
does kies see the device?
does it show up in device manager at all?
erica_renee said:
aww ok/ see the note 2012 has proprietary cable. and even after market cables often do not work right.
are you on stock firmware?
have you tried another pc?
does kies see the device?
does it show up in device manager at all?
Click to expand...
Click to collapse
stock firmware? I have no idea what is that.
Yes, I've tried to connect to another PC, still doesn't show up. And no, it doesn't show up in device manager.
theresa55 said:
stock firmware? I have no idea what is that.
Yes, I've tried to connect to another PC, still doesn't show up. And no, it doesn't show up in device manager.
Click to expand...
Click to collapse
if you are positive the cable is fine.(appears to be if works on other device connected to same computer)
only thing i could say is factory reset (long shot)
this will erase your data put back to new state
to do so
settings
general
backup/reset
factory data reset as i said knowing your stock its bit likely the issue
could be loose usb connector
i would go buy a new oem (made from samsung) cable and try that
anything more would require having it in my hands
when I connect it to PC, its only charging. it does not even appear in Portable Devices in Windows 10. OTG does not work either...
nickSnake said:
when I connect it to PC, its only charging. it does not even appear in Portable Devices in Windows 10. OTG does not work either...
Click to expand...
Click to collapse
Check USB cable. Usually, it is caused by Data + and Data - connection to loose its solder.
Check USB ports too.
Check ADB drivers installed too.
RFD80M-75679 said:
Check USB cable. Usually, it is caused by Data + and Data - connection to loose its solder.
Check USB ports too.
Check ADB drivers installed too.
Click to expand...
Click to collapse
yahh, itried different cables too, but they all work in other devices.. i guess my port is the culprit.. can i get repaired though?
Check the notification on the phone. It'll ask you for the connection mode and once you choose the right one the phone will show on the device list.
slimshady76 said:
Check the notification on the phone. It'll ask you for the connection mode and once you choose the right one the phone will show on the device list.
Click to expand...
Click to collapse
there is no notification, nothing. its just charging the phone..
nickSnake said:
yahh, itried different cables too, but they all work in other devices.. i guess my port is the culprit.. can i get repaired though?
Click to expand...
Click to collapse
Probably the best place to replace charging port is to go service center or technician to have it serviced.
RFD80M-75679 said:
Probably the best place to replace charging port is to go service center or technician to have it serviced.
Click to expand...
Click to collapse
I guess so... Tnx
I'm trying to use Android Auto with my toyota yaris and my oneplus 9 pro. But whenever I plug in the usb c cable nothing happens. The phone only starts to charge. I have tried to delete the cache and storage of the app, reinstall android auto, reboot and changing the default usb configuration in developer settings of my phone. But nothing happens, my girlfriend can use android auto in the car with her galaxy s21+ with the same cable. So it does not seem to be the car or the cable.
Does anyone has any recommendations to fix this?
Android version: 12
Oxygen OS: 12.1
Build number: LE2123_11_C.61
Android Auto version: 7.8.622514-release
Thanks
in AA settings:
is "Add new cars to Android Auto" enabled?
also:
in "connection help" they write, that USB debugging has to be turned off (I have it turned on and it connects nevertheless)
Yes "Add new cars to Android Auto" is enabled. I will try to turn USB debugging off to see if that helps.
drumstick3 said:
Yes "Add new cars to Android Auto" is enabled. I will try to turn USB debugging off to see if that helps.
Click to expand...
Click to collapse
it has to be installed as a system app. So it either has to be included with the rom or flashed as part of a gapps package. Downloading it from the Play Store will not work. So that could be your problem.
Use high end cable or new cable only for AA. Most probably it will fix your issue. I faced the same issue, and I changed the cable. If I can see the cable I can let you know.
aarkee said:
Use high end cable or new cable only for AA. Most probably it will fix your issue. I faced the same issue, and I changed the cable. If I can see the cable I can let you know.
Click to expand...
Click to collapse
I bought a new cable last Saturday and that cable works for my gf's phone. So that's why I think it's my phone.
drumstick3 said:
I bought a new cable last Saturday and that cable works for my gf's phone. So that's why I think it's my phone.
Click to expand...
Click to collapse
Yes, I found for the 9 pro that the only cable that successfully worked for me using adb and fastboot on the computer was my 8 pro cable. The cable I used to use wouldn't work on the 9 pro. Also I found that I have a DAC that works on the 8 pro but will not work on the 9 pro.
Samuel Holland said:
Yes, I found for the 9 pro that the only cable that successfully worked for me using adb and fastboot on the computer was my 8 pro cable. The cable I used to use wouldn't work on the 9 pro. Also I found that I have a DAC that works on the 8 pro but will not work on the 9 pro.
Click to expand...
Click to collapse
What is a DAC?
I'm having some trouble with Android Auto. My new OnePlus 11 will only connect "Charging Only" and will not connect for File Transfer / Android auto.
If I connect via USB and enable "USB Tether" it worked for a second, enough to pop Android Auto, and then disables...
It did work for a phone-to-phone transfer using OnePlus's transfer app!
What else have I tried:
1) Hard reset to factory
2) developer mode - I just tried editing the default connection mode (after enabling developer mode) and still nothing.
3) USB monitor - Indeed I have also tried a USB monitor, and nada. It connects to power and then disconnects immediately.
Verification! Both my car and the monitor connected perfectly with no additional config to my OnePlus 9, and my Oneplus 7 Pro today.
Any suggestions?
Exact same problem here...after trying to connect nothing happens (in Skoda Kamiq). Phone says it's connected to android auto. Strange things is it works without problems in my other car (Toyota Aygo). Seems like a compatibility issue in with car hardware or software. Probably a system update is needed to fix this sinds it's a new phone.
Is USB Debugging in Developer Mode On or Off?
azsl1326 said:
Is USB Debugging in Developer Mode On or Off?
Click to expand...
Click to collapse
It's off
Tijmenh said:
It's off
Click to expand...
Click to collapse
Have you tried the newest APK version of Android Auto from APK Mirror?
Yep..9.0
USB Debug is not enabled
For me it's more than one device that does not work. Both Android Auto on my 2018 Nissan Leif and my external monitor. Both of which worked perfectly with my OnePlus 9.
What is OS?
Color OS look like aa can't use.
sCRIPTPER said:
What is OS?
Color OS look like aa can't use.
Click to expand...
Click to collapse
This is all retail OnePlus 11 with Oxygen 13 no mods.
When I plug the cable into my phone in the car, I got a pop-up screen asking what I want to do with the connection. One of the options is File Transfer / Android Auto. Does that happen for you?
azsl1326 said:
When I plug the cable into my phone in the car, I got a pop-up screen asking what I want to do with the connection. One of the options is File Transfer / Android Auto. Does that happen for you?
Click to expand...
Click to collapse
Sometimes. No effect.
It connects then immediately disconnects.
hinshelm said:
Sometimes. No effect.
It connects then immediately disconnects.
Click to expand...
Click to collapse
Somewhat of an obvious question, bit have you tried a different cable? Maybe the OP cable?
hinshelm said:
Sometimes. No effect.
It connects then immediately disconnects.
Click to expand...
Click to collapse
Yes, but makes no difference what option I choose. Besides that I got the same popup in my other car and it works fine.
azsl1326 said:
Somewhat of an obvious question, bit have you tried a different cable? Maybe the OP cable?
Click to expand...
Click to collapse
Yes, both the cable that worked with the OnePlus 9 and the cable that came with the Oneplus 11.
I'm having the same issue, very annoying. Do we just wait on a software update?
Jeroen257 said:
I'm having the same issue, very annoying. Do we just wait on a software update?
Click to expand...
Click to collapse
I spoke to support and they wanted to replace my device, by just returning it!
I would have to be without a device (I traded in my old one). I would likely move to Samsung rather than be without a phone. Then return it.
Suck...
hinshelm said:
I spoke to support and they wanted to replace my device, by just returning it!
I would have to be without a device (I traded in my old one). I would likely move to Samsung rather than be without a phone. Then return it.
Suck...
Click to expand...
Click to collapse
Damn, that sucks. Did you spoke to the support by mail? I spoke to them by chat and they just told me to send feedback in the Android Auto app..
Jeroen257 said:
Damn, that sucks. Did you spoke to the support by mail? I spoke to them by chat and they just told me to send feedback in the Android Auto app..
Click to expand...
Click to collapse
I phones them. We went through everything. It's 100% the phone as the same issue manifest with multiple devices. Car & Monitor.
I'm sure this is software related because it works in my other car. I wouldn't return my device to find out the new phone has the de problem. Also read alot about Samsung users (s23) with connection issues for Android Auto.
I'm somehow relieved it's a software problem so they CAN fix it, the question is, when..