Develop Bugs

[Custom-Roms] Huawei Mate 8 - NXT- EMUI 5.x-Android 7

[Custom Rom]
[K-Rom M8-V5] [Magisk](all regions) Huawei Mate 8 -
NXT- B592 - EMUI 5.01 - Android 7 -
Based on Huawei Firmware
B592 (China) and KankVip B592 V3
On TWRP backup basis.
Developed and tested on this device:
Huawei Mate 8 (NEXT)
Model number: Huawei NXT-L29
Build Number: NXT-L29C432B581
-OTA updated
without branding, with root and root access.
TWRP recovery
Mods:
- Call Recorder
- KangVip Advanced Settings
- Autostart administration in the
telephone manager
- Viper 4 Android FX 2.5
- Ad Block Plus
- Immersive Mode
(hide Navbar e. t. c.)
For topicality:
The Google Patch is from 2017-10-05 and the firmware is
Version B592 (Asia)
The deviating specifications in the device information,
have been taken over by the B581 and
guarantee the OTA eligibility for subsequent updates."
Please make a backup of your data with Huawei Backup and TWRP.
The Rom will be installed as if you were trying to restore a TWRP backup.
All your apps remain intact.
Prerequisites:
Firmware B581
TWRP Recovery (from download)
Root is not necessary.
OEM and FRP unlocked
USB Debugging on.
You are familiar with the matter? Then let's go!
Preparation/ Installation:
Download:
Please do not download the MEGA 2017-11-09-M8-K-Rom-V5.rar as "ZIP".
The backup is already compressed.
Unpack and the backup directory:
2017-11-09-M8-K-Rom-V5
to the TWRP Backup folder on the ExtSd.
Installation:
Uninstall these apps, if available:
SuperSu and Busybox.
Restore and reboot the backup in TWRP.
Please do not perform any wipes immediately before and after the event.
In the future, never do a factoryreset.
Depending on the configuration of your existing B581,
the following may still have to be done:
install ************* v5.3.0.apk,
flash in TWRP BusyBox-Magisk-1.25.zip,
flash in TWRP Magisk-permissive-script_v1.0.zip,
for the Kangvip advanced settings.
For Ad Block Plus first install the app and
then the zip's flash.
If the flashing fails, please add the modules in the Magisk Manager App.
Don't experiment with Xposed!
The SafetyNet is lost."
The Rom is partially debloated. Some Google and Huawei apps have been removed.
They can be installed by you if necessary.
That's what you can do with the HiApp.
In the Kangvip Advanced Settings do not use the Addblocker and
"hideNavbar". Both works only on China Roms.
I recommend to fully charge the battery after installation and carry out a calibration.
Since the rom runs with the stock kernel, you can only take a few options
in the k-advanced settings / tune cpu.
With the app in the attachment, you can check it out.
See also the screenshots.
....... and remember: A custom ROM is never as perfect as a stock Rom.
You have to teach him something in between.
Depending on the configuration of your devices, it can of course also be "stuck" somewhere.
I give full support for this, because there is a lot of support between rooted nougat devices and the EMUI
there's no real wedding.
​
Good luck!
Subsequent rooting with SuperSu is possible with the V5:
Restore the stock boot partition (kernel) from a TWRP backup.
SuperSU.EMUI5-K-Rom.zip flashing.
finished.
Threadupdate: 2017-11-17:
Increase battery life:
I have tested some settings on cpu performance.
By turning off individual cores, the others have to do the work.
It is difficult to predict whether this will cause permanent damage.
Lowering the frequency distributes the load evenly balanced.
The performance loss is only 6% and not noticeable
and the battery life is considerably longer.
You can easily see this on the graph in the appendix.
Test environment:
V. 5 with SuperSu Root
Ex kernel tuner app (beta).
My configuaration is: max power big cores= 1306 / little cores= 807 MHz.
You can create individual profiles and put a widget on the home screen.
I recommend a calibration with "Battery Calibration" from NéMa. It also optimizes the consumption of all available apps.
Thanks to:
[KangVIP]
Chainfire, Stephen (Stericson) + Jmz Software, Lineage OS Team,Team Win RecoveryProject, JRummy and Huawei Technologies Co., Ltd. Greetings to China Mobile Com.
[Custom Rom] Huawei Mate 8 - NXT-L29C432B582 - Custom System Update ("V.6")
- EMUI 5.01 - Android 7 -​Tested by @apat26. Quote:
"I tested your ROM on L29C185B582 for a couple of
days and this is working perfect."
On TWRP backup basis.
This update replaces the [K-Rom-M8-V5].
Developed and tested on this device:
Huawei Mate 8 (NEXT)
Model number: Huawei NXT-L29
Build number: NXT-L29C432B582
- OTA updated.
- Without branding, with root and root access.
- TWRP recovery[/SIZE]
Mods:
- Call Recorder
- KangVip Advanced settings
- Autostart administration in the phone manager (PM+)
- Viper 4 Android FX
- Obtaining OTA authorization
I couldn't test if this runs on Firmwares other regions.
I think the v6 is going on all regions on B582.
Quick guide for experienced users:
Please make a backup of your data with Huawei Backup and TWRP.
The Rom will be installed as if you wanted to restore a TWRP backup.
All your apps remain intact.
Conditions required:
- Firmware B582,
- TWRP recovery, (from download, or available from v5 )
- root is not necessary,
- OEM and FRP unlocked,
- USB Debugging on.
All required files are in the download folder.
You are familiar with the matter? Then let's go!
If available, uninstall these apps: SuperSu and Magisk.
A unroot is not necessary. Please do not download the downloads as "ZIP".
Installation:
1. Replace existing boot partition:
"2017-12-M8.B582.stock.kernel.boot"
copy in the TWRP backup directory to the ExtSd and restore.
2. Install update:
"2017-12-M8_B582_AdvS_Xposed_SystemUpdate"
also copy to the TWRP backup directory and restore."
3. Rooting:
- In TWRP mount Internal storage/ system,
- go to: Install, system/ k-rom/ set and install the SuperSU.zip.
- Reboot.
- After starting, take the BusyBox App from the download.
Then please use it to install its binaries.
- Install the PM+ app and bring the autostart administration to the phonemanager.
Iggnore the incompatibility warning.
Do not reboot between steps 1 to 3. Do not wipes before and after.
That's all. The installation is complete.
If Viper or Xposed have not been installed with it, this can be found in the
Advanced settings can be made up for.
Xposed is already active. In case the framework gets disabled,
in the Advanced settings. There's no way use other Xposed versions.
This also applies to SuperSU. They are not compatible with this system.
Both are optimized for this system.
Of course, you can also use Magisk to root later with the instructions
in the v5 thread. (loss of ota authorization)
Xposed does not run under magisk rooting together with the Advanced settings.
It must be used for a successful SafetyNet test, must be completely removed before rooting.
In the Kangvip Advanced settings do not use the Addblocker and "hide Activate NavBar".
Both works only on China Roms.
Hiding the NavBar can be done comfortably with the App "Tiles" from the playstore. (See v5)
In the K-Advanced Settings /tune cpu, some of the following are available.
Modifications of the computer performance possible. Those who need more power can do so.
Testing out the "Power save" options is useless. Did a lot of it.
The Huawei's own energy saving settings cannot be topped.
Good luck!
Thank you very much:
[KangVIP] (Advanced settings),
@Tecalote (SuperSU)
and Chainfire, Stephen (Stericson) + Jmz Software, Team Win RecoveryProject,
JRummy and Huawei Technologies Co., Ltd.
NEW​[Custom Rom] [KangVip Rom M8-B592-V4]Huawei Mate 8 - NXT-L29C432B592 - Custom System Update
- EMUI 5.01 - Android 7 -​
On TWRP backup basis.
This turns the B582 into a B592.
Developed and tested on this device:
Huawei Mate 8 (NEXT)
Model number: Huawei NXT-L29
Build number: NXT-L29C432B582
- OTA updated.
- Without branding, with root and root access.
- TWRP recovery[/SIZE]
Mods:
- Call Recorder
- KangVip Advanced settings
- Autostart administration in the phone manager (PM+)
- Viper 4 Android FX
- Obtaining OTA authorization
I couldn't test if this runs on Firmwares other regions.
Quick guide for experienced users:
Please make a backup of your data with Huawei Backup and TWRP.
The Rom will be installed as if you wanted to restore a TWRP backup.
All your apps remain intact.
Conditions required:
- Firmware B582,
- TWRP recovery
- root is not necessary,
- OEM and FRP unlocked,
- USB Debugging on.
Downloads: https://www.mediafire.com/folder/2ppn9ewownun5/NXT
You are familiar with the matter? Then let's go!
If available, uninstall these apps: SuperSu and Magisk.
A unroot is not necessary. The download is compressed in zip with Huawei file manager.
Installation:
Extract
"2017-12-18--K_E5_B592_V4.zip,"
copy it in the TWRP backup directory to the ExtSd and restore.
Immediately afterwards, rooting starts with the installation of SuperSuV4 and reboot.
Install the PM+ app and bring the autostart administration to the phonemanager.
Iggnore the incompatibility warning.
Do not reboot between restoring and rooting.
That's all. The installation is complete.
If Viper or Xposed have not been installed with it, this can be found in the
Advanced settings can be made up for.
Xposed is active and stable.
There's no way use other Xposed versions.
This also applies to SuperSU. They are not compatible with this system. Do not change the busybox binaries.
Both are optimized for this system.
In the Kangvip Advanced settings do not use the Addblocker and "hide Activate NavBar".
Both works only on China Roms.
Hiding the NavBar can be done comfortably with the App "Tiles" from the playstore. (See v5)
In the K-Advanced Settings /tune cpu, some of the following are available.
Modifications of the computer performance possible. Those who need more power can do so.
Testing out the "Power save" options is useless. Did a lot of it.
The Huawei's own energy saving settings cannot be topped.
Good luck!
Thank you very much:
[KangVIP], Chainfire, Stephen (Stericson) + Jmz Software, Wraithdu, Team Win RecoveryProject,
JRummy and Huawei Technologies Co., Ltd.
The roms I offer are original Huawei firmware. Only the system was modified by kangvip and me. The kernel are 100% stock. If you like this work you could give a donation to kangvip.
https://www.paypal.me/KangVIP
Please not for me, because I don't take money for it. I created this TWRP backup roms for my use. I love it when these things work. And it does. Now I'll share it with you.​
Downloads:
https://mega.nz/#F!1g8QDZqa!F9wV-6oWYUsx70n96Xb3dQ
Disclaimer:
Despite careful elaboration, I cannot guarantee that the execution of this manual will not cause any damage to the device or operating system and therefore I do not assume any liability for any damage or malfunction of the hardware and software! If you are still unsure, follow these steps: Follow the instructions only if you or your device is subject to any conditions (model number, Android version, etc.). Read the instructions carefully and completely, look up unknown terms. Check downloaded files for viruses. Make a backup of important settings and data. Do not follow the instructions if you do not know what you are doing.
These warnings must be logical. Please process my comments correctly.

Discussions, exchange of experiences, tips and tricks
around the topic "KangVip Roms"
are welcome here.
:good:​

ChinHon said:
Discussions, exchange of experiences, tips and tricks
around the topic "KangVip Roms"
are welcome here.
:good:​
Click to expand...
Click to collapse
Nice to see you here
Waiting for your work with kang b592,,,

Link ? nvm. found will test it soon.

hamadazh said:
Nice to see you here
Waiting for your work with kang b592,,,
Click to expand...
Click to collapse
Comes in about 2 hours.

danterape said:
Link ? nvm. found will test it soon.
Click to expand...
Click to collapse
Open the txt file in the attachments.

w00t w00000t, good job there buddy
Sent from my HUAWEI NXT-AL10 using Tapatalk

ChinHon said:
Comes in about 2 hours.
Click to expand...
Click to collapse
Ok bro, take your time we can waiting more than 2 hours

hamadazh said:
Ok bro, take your time we can waiting more than 2 hours
Click to expand...
Click to collapse
Check out the thread update !!

ChinHon said:
Check out the thread update !!
Click to expand...
Click to collapse
Yeah thank you :good:

I saw this rom abit ago on the euro net, all kang roms will work on any mate 8 version b580 and up all models , all it takes is the custom multi version kernel , I found a few online , but I run dl0017 because I feel its the best and all the diferance is with google framework is install thegoogle apps package. There r multiple ones available , just be sure to remove autonavi location services from the phone too to get proper gps and remove hi suite.

c|nder said:
I saw this rom abit ago on the euro net, all kang roms will work on any mate 8 version b580 and up all models , all it takes is the custom multi version kernel , I found a few online , but I run dl0017 because I feel its the best and all the diferance is with google framework is install thegoogle apps package. There r multiple ones available , just be sure to remove autonavi location services from the phone too to get proper gps and remove hi suite.
Click to expand...
Click to collapse
My rom is a pure system update. It's tuned to the stock kernel. All other partitions remain unaffected during installation. It's not just Kangvip Rom. There are no problems with the Gapps. They do not need to be reinstalled. Many Devs adapt the kernel to the rom, I do it the other way around.

Well the kernel is what differentiates the phone from the OS LOL. U do know u can take the newest b592 kernel and just patch a few lines for it to be accepted and not trip any security features , eg: fingerprint dev opt.

@ChinHon
One question
Do you can overwrite a normal B560 with this backup (v2 or v3)? I saw nothing about of which firmware we can have to install your custom rom.
B.R

franzyroy said:
@ChinHon
One question
Do you can overwrite a normal B560 with this backup (v2 or v3)? I saw nothing about of which firmware we can have to install your custom rom.
B.R
Click to expand...
Click to collapse
The B581 is required, but it does not work with the B560.

I have now successfully rooted the V3 with magisk and stock kernel. Substratum no longer works. We can do without it, too. There are no EMUI themes for this. I didn't keep Xposed with magisk, but the previous installation with K-Settings. Stable here too. Antutu's good at 95,850.

Would this work on asia/ Pacific l29 b585??

i have a mate 8 with b581 can i flash v3? and do i need to wipe?

nikolas60 said:
i have a mate 8 with b581 can i flash v3? and do i need to wipe?
Click to expand...
Click to collapse
Yes you can. Not flash, but as TWRP backup restoring. No wipe, please. It's all in the manual.

c|nder said:
Would this work on asia/ Pacific l29 b585??
Click to expand...
Click to collapse
If you mean the ROM, Pacific definitely. Maybe the 585.
Make a TWRP backup and then test it. If it doesn't work, you just have to restore "boot and system" of your backup.

Slim Tab V6 [ARK4] [T835/T830]

This is a clean and fast version of the current ARK4 Firmware. Most of the Samsung bloat has been removed while maintaining a stable system.
Features::highfive:
Based on latest ARK4 Firmware
Latest Modesty kernel with enhancements
December security patch
Zipaligned
Deknoxed
Disabled RMM
Lots of bloat removed
Latest Nova Launcher
Using Cloudflare DNS servers
Buildprop tweaking battery and performance
iOS 12.1 emojis & GoogleSans font
Goodlock Multistar, Lockstar and Taskchanger
Other included apps: YouTube Vanced and Activity Manager
Rooted with latest magisk by Ianmacd
Enabled Doze for Google Play Services and Play Store
Naptime for improved deep sleep (enable in app)
AdAway as adblocking solution, but also preinstalled Goodbye Ads hosts file
All added apps can be uninstalled
ADB enabled by default
Changelog
V6
- Rebased to new firmware ARK4
- Switched to iOS emojis
- Updated all apps
- Latest Modesty Kernel (23/12)
- Adblock hostfile default now
Download it now
Quick notice:
To change the Goodlock apks settings get an activity launcher and launch the main activity! In V6 Activity Manager will be included to serve this purpose.
To restore Netflix functionality you have to flash this module via magisk.
When running custom kernels on newer samsung devices bluetooth pairings are bugged. Flash this module as a fix!
If you are interested in controlling the kernel options install the excellent MTweaks app!
Credits going to
SuperR for his linux kitchen
Geekydroid for his tutorial
Ianmacd for his magisk builds and modesty kernel
foobar66 for his googlewiz script and buildprop
yash92duster for tutorials
Samsung for firmware

dr460nf1r3 said:
Hi guys,
I recently started learning about cooking own custom rom builds and since there was no rom available for our tabs i created one myself. Im gonna share my builds here as well since there are probably guys here who want to flash a custom rom and update but dont know how.
V1 is a basic build created out of the latest AJR3 Firmware with some very basic modifications thus being almost stock. I plan on debloating further and adding more mods but that takes time to learn and test. For now enjoy the first build! :fingers-crossed:
As im only in possession of the LTE variant of the tab i cant tell if it also works on the wifi version. It might work if you flash the rom and modesty kernel afterwards, but again, i cant test this so go ahead, test and tell me afterwards.
Features:
- Based on latest ARJ3 Firmware
- October security patch
- Firmware fixes ghost inputs while gaming
- Zipaligned
- Deknoxed
- Disabled RMM
- Safe debloated
- Few buildprop tweaks
- Includes Adaway and Multistar
- No root, gotta flash magisk afterwards, but i integrated Ianmacds own Magisk build into the rom so you can download the latest zip via the installer
I was thinking about integrating a modified host file for adblocking but since i use one that breaks the facebook app by default i only included Adaway. If you want to have even better adblocking though, take a look at this thread!
Also, Modesty kernel will be based on the latest firmware soon, so i advise you to flash it afterwards.
Im by no means experienced with cooking roms and this is my first rom ever so this is probably going to be all about debloating and basic mods. :silly:
Download:
Version 1
Credits going to
- Androdev for classy kitchen
- Geekydroid for his very nice tutorial
- Ianmacd for his magisk builds
- foobar66 for his googlewiz script
- Samsung for firmware
Click to expand...
Click to collapse
Does deknoxed mean it does not trip the Knox counter. I don't want to root due to the fact my mobile device manager on the job may not let me use this tablet for work. Is root necessary? Also is this based off of the Korean model or another english speaking country? I'm trying to get alot of the korean defaults out of my tablet. Thank you.

gradynyc said:
Does deknoxed mean it does not trip the Knox counter. I don't want to root due to the fact my mobile device manager on the job may not let me use this tablet for work. Is root necessary? Also is this based off of the Korean model or another english speaking country? I'm trying to get alot of the korean defaults out of my tablet. Thank you.
Click to expand...
Click to collapse
No, it means that the knox apk files have been removed from the rom. Knox counter is triggered when you flash a custom recovery and root the device and has nothing to do with the rom you are flashing.
This is based on the latest firmware i found, which is from malaysia, but universal for the T835 model which is not the korean version.
In order to flash this rom you have to get TWRP working which trips knox but the rom itself is unrooted.
Sent from my dream2lte using XDA Labs

I love you

gradynyc said:
Does deknoxed mean it does not trip the Knox counter. I don't want to root due to the fact my mobile device manager on the job may not let me use this tablet for work. Is root necessary? Also is this based off of the Korean model or another english speaking country? I'm trying to get alot of the korean defaults out of my tablet. Thank you.
Click to expand...
Click to collapse
Download a firmware from an English speaking country and flash it via ODIN. Look on sammobile for firmware and instructions. Official firmware doesn't trip the knox bit.

So im currently working on safe debloating the rom i googled every app i removed one by one to avoid making the system unstable. However whenever i try to sign in to google account the google play services crash and i cant find the error thats really unfortunate
Edit: so appearently it was because i removed chrome.. now i still have to get dex working
Edit: Dex also working seems to be the samsung keyboard..
Sent from my dream2lte using XDA Labs

Im happy to announce the second release of my rom!
Changelog:
- Safe debloated all of the useless samsung apps
- Added YouTube Vanced and Goodlock Taskchanger
- Nova Launcher by default
- Pixel Sounds
- Pie Emojis
- GoogleSans Font
Download V2 here
Edit: This release accidently killed GPS just fyi. Fix already done but cant upload until tomorrow evening. If you want to do it yourself take V1 and copy FusedLocation folder from priv-app to the corresponding location in V2.
Sent from my dream2lte using XDA Labs

Release of rom version 2.1 :victory:
Changelog:
- GPS fixed
- Few more buildprop tweaks taken from googlewiz oreo credits to foobar66
- Modesty kernel by default credits to Ianmacd
Dirty flash is always fine.
Im thinking about replacing samsung apps by google ones however there wont be tooltips on spen hovering like on the samsung ones and no splitscreen while being not being in portrait mode.
Any idea on what else to add/debloat/whatever?
For T830 users im pretty sure that this rom will work fine If you flash the Modesty kernel after rom installation.
Download 2.1 here!
Following is release 2.2!
Changelog:
- Now prerooted with latest Ianmacd magisk!
- Cloudflare DNS servers used
- Enabled Doze for Google Play Services and Playstore
- Naptime app for improved deepsleep
Download 2.2 here!

Release 3
Changelog:
- Samsung Pie keyboard
- Switched to Ruthless Launcher
- Updated Google & Samsung apps to the latest so no more Galaxy Store needed
- Updated Pie Emojis
- Removed Samsung account & Experience service
- Switched to GCam
I'd include more of them pie apps but they are still rather bugged so here we go.
Download removed.

Release 3.1
Changelog:
- Removed Samsung Camera & its unneeded apks
- Removed Gallery as im only using Google Photos
- Reverted to latest oreo Samsung keyboard as Pie one was too unstable
A few notes:
- If you want to change DeX background download Samsung Gallery from playstore as the app points towards it. You can uninstall it afterwards.
- For Gcam you have to install this apk after setting up rom, somehow this fixes the crash if only installed in /apps and I sonst know how to fix this by default. After this its fully working though. https://forum.xda-developers.com/showpost.php?p=75675455&postcount=209 credits to cstark27
- To change the Goodlock apks settings get any kind of activity launcher and launch the main activity!
Download here https://mega.nz/#!zI8yGQrK!lV85-Aplo42VtdfhzSm3qZcgMGu1peG9ziNOCxI8gdM
Sent from my dreamlte using XDA Labs

v3.1 - File no longer available

EggZenBeanz said:
v3.1 - File no longer available
Click to expand...
Click to collapse
Im currently rebuilding the rom as the rom wasnt 100% stable in longterm use.
The process will result in a bigger yet more stable rom which is fine i guess.
Also, all of the apps including the launcher will be updated and all of the added Apps can now be removed.
Magisk and kernel will be updated to the new release too.
Rom will be up tomorrow as im busy today.
BTW V4+ will be called Slim Tab :fingers-crossed:

dr460nf1r3 said:
Im currently rebuilding the rom as the rom wasnt 100% stable in longterm use.
The process will result in a bigger yet more stable rom which is fine i guess.
Also, all of the apps including the launcher will be updated and all of the added Apps can now be removed.
Magisk and kernel will be updated to the new release too.
Rom will be up tomorrow as im busy today.
BTW V4+ will be called Slim Tab :fingers-crossed:
Click to expand...
Click to collapse
Awesome, thanks. My tab will arrive today so good timing. Will your next upload be v4 or v3.1 again?

Thanks for this wonderful rom. It would be even better if you could add 3minit battery.
Sent from my SM-T835 using Tapatalk

EggZenBeanz said:
Awesome, thanks. My tab will arrive today so good timing. Will your next upload be v4 or v3.1 again?
Click to expand...
Click to collapse
It will be V4 of course

sbluescab said:
Thanks for this wonderful rom. It would be even better if you could add 3minit battery.
Click to expand...
Click to collapse
Personally I really dislike 3minit so I wont include it, sry.
Im using AccuBattery as battery indicator since its more clean.

dr460nf1r3 said:
Im currently rebuilding the rom as the rom wasnt 100% stable in longterm use.
The process will result in a bigger yet more stable rom which is fine i guess.
Also, all of the apps including the launcher will be updated and all of the added Apps can now be removed.
Magisk and kernel will be updated to the new release too.
Rom will be up tomorrow as im busy today.
BTW V4+ will be called Slim Tab :fingers-crossed:
Click to expand...
Click to collapse
Looking forward to your rom I should have my tab in a few days.
Sent from my SM-T820 using Tapatalk

Alright guys, here as promised V4!
Changelog:
- System is now less debloated but everything works
- Samsung gallery and camera are back
- Activity Manager and Linux on Dex are now included too
- All added apps can now be uninstalled if you dont like them
- All apps updated (e.g. Ruthless launcher 3.0)
- Modesty kernel updated to latest version
Notice the following before flashing:
- T830 users have to flash Modesty kernel since i only included T835 boot.img
- To change the Goodlock apks settings start Activity Manager and launch the main activity of the apk
- To restore Netflix functionality you have to flash this module via magisk
- Flash this module to restore the persistent saving of bluetooth pairings (cuz of running custom kernel)
- Skip setting up a liebe security in the setup process and setup later!
Finally, here the download :victory:

Thanks for this ROM, got my S4 this morning the timing is perfect

thanks for the v4 man. Stupid question: Do we flash this in TWRP? Do I wipe everything if coming from stock rom?
I'm new to samsung stuff so not familiar with the steps

[ROM][GTS4LVWIFI][10]LuisROM Android 10 based on crDroid V6.x

My LuisROM based on cdDroid V6.x for Samsung Galaxy Tab S5e WiFi (gts4lvwifi)​
Code:
*** Disclamer
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is my personal custom rom. LuisROM based on the crDroid, LineageOS and other...
This is a ROM that works on Samsung Galaxy Tab S5e WiFi (gts4lvwifi) only! This ROM comes with a highly-customized kernel, as well as some other very custom modifications.
I will NOT provide support if you install a custom kernel!
Changelogs: http://luis-builds.de/downloads/lineageos/cr/Samsung_Galaxy_Tab_S5e_(gts4lvwifi)(gts4lvlte)/changelog_gts4lvwifi.txt
Introduction
Hello Friends!
I had troubles to find current builds for my devices so I decided to make regular builds for my devices. When my friends told me about similar problems, I extended the builds to include their devices as well. So these builds were and are mainly for my friends and me, but I finally decided to provide them also for public download.
My ROMs
My LuisROM an awesome combination of performance, customization, power and the most new features, brought directly to your device. The LuisROM build server generates automaticly every 2nd days new builds directly from the sources. Thanks to (thanks to @LuK1337) for the device,vendor and kernel sources.
Notice
Sometimes I get a lot of help or feature requests from users of my LuisROMs. My dog Luis and I try to fulfill most of the wishes, but that is not always possible. I do that as a little hobby and Luis does not always want to build ROMs . Please understand if I can not always answer directly.
ROM features:
Based on the latest cdDroid V6.x (Android 10), LineageOS and AOSP sources
Latest security patches and sources
OTA Updater
Compatible with EX Kernel Manager
Many other misc. performance and stability improvements under the hood
Kernel: Linux 4.9.x Kernel with many mods other devs and me!
Removed lots of excessive bloat (improves security and performance)
Improved stability (several bugs not listed here have been fixed)
Boeffla Wakelock blocker driver V1.1.0
More I/O-Schedulers (fiops, sio, zen, maple)
Added fsync on/off support.
Disabled crc check
Optimized for performance and battery life
Fast charging
Compatible with EX Kernel Manager
Compatible with systemless root (recommend Magisk 20.3 or higher !!!)
Wireguard kernel support
Many other misc. improvements not listed here
First time installation:
Unlock the bootloader, 1. Connect to WiFi network, 2. Enable OEM Unlock in developer options, 3. Turn off the tablet, Boot to download mode manually by plugging in USB and holding all the buttons for few seconds, 4. Follow instructions on the screen
Connect to WiFi network and make sure OEM Unlock in developer options is still checked
Flash custom VBMeta image ( https://dl.twrp.me/gts4lvwifi/vbmeta.tar.html ) in Odin ( use AP slot )
After flashing VBMeta, boot to stock. It'll likely ask you to wipe data, if so do that
Connect to WiFi network and make sure OEM Unlock in developer options is still checked
Now you can flash TWRP ( gts4lvwifi > https://dl.twrp.me/gts4lvwifi ) in Odin ( use AP slot once again ), for convenience you can hold volume up while flashing it so that you boot to recovery right after it's flashed
Boot into TWRP (press power and vol+)
Install latest cr LuisROM Android 10 http://luis-builds.de/downloads/lineageos/cr/Samsung_Galaxy_Tab_S5e_(gts4lvwifi)(gts4lvlte)/
Optional: Flash Open GApps and Magisk 20.x and above
Reboot ( make sure to not install TWRP app when TWRP asks you to )
OTA App update installation (auto):
Go to crDroid > About cdDroid > Updates
Press reload button (right corner)
Select download on the new build list
After download select update/flash new build
Optional: Installed gapps and magisk will be moved into new system automaticaly !
TWRP update installation (manual):
Download latest LuisROM build (download here)
Boot into Recovery TWRP
Flash my updated LuisROM (download here)
Reboot and enjoy
Download
Latest builds: (http://luis-builds.de/downloads/lineageos/cr/Samsung_Galaxy_Tab_S5e_(gts4lvwifi)(gts4lvlte)/)
Latest firmware: (download)
My other devices/ROMs: (http://luis-builds.de/downloads/lineageos/)
Download OpenGapps: (http://opengapps.org)
Flash latest TWRP Recovery: (download here)
Changelog
Developer: http://luis-builds.de/downloads/lineageos/cr/Samsung_Galaxy_Tab_S5e_(gts4lvwifi)(gts4lvlte)/changelog_gts4lvwifi.txt
Known Issus
..
Telegram group:
https://t.me/rr_luisrom
Donate for my dog Luis, he is looking forward to an extra bone:
https://bw2.link/LuisDonation
Thanks To/Credits
Special thanks to Teams:
LineageOS team: https://www.lineageos.org
crDroid Team: https://crdroid.net/
OMNI team https://omnirom.org/about/
SLIMROMS https://slimroms.org/#/about
topjohnwu (Magisk) https://forum.xda-developers.com/apps/magisk
Thanks to the best devs on earth:
LuK1337 (https://forum.xda-developers.com/member.php?u=5075128)
francokernel (https://forum.xda-developers.com/member.php?u=3292224)
flar2 (https://forum.xda-developers.com/member.php?u=4684315)
nathanchance (https://forum.xda-developers.com/member.php?u=6842057)
and of course to all the supporters.
Thanks for the Sources/Blobs/Tweaks
crDroid (https://github.com/LineageOS)
Omnirom (https://github.com/omnirom)
TheMuppets (https://github.com/TheMuppets)
My Sources/Blobs/Tweaks
DEVICE (FraEgg/android_device_samsung_gts4lvwifi)
KERNEL (https://github.com/FraEgg/android_kernel_samsung_sdm670)
XDA:DevDB Information
[ROM][GTS4LVWIFI][10]LuisROM Android 10 based on crDroid V6.x, ROM for the Samsung Galaxy Tab S5e
Contributors
8224Freak
Source Code: https://github.com/FraEgg
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: T720XXS1ASL3
Based On: LineageOS, crDroid, AOSP
Version Information
Status: Beta
Beta Release Date: 2020-03-24
Created 2020-02-26
Last Updated 2020-03-24

Screenshots

Great work man! Nice seeing you here...

Can I install this on the LTE version?

averardo said:
Can I install this on the LTE version?
Click to expand...
Click to collapse
no. no telephony.
cu Frank

i have tab s5e wifi version.
BUT i am getting this error that this package is for GTS4LVWifi your device is GTS4LVLTE.
i flashed twrp fGTS4L WIFI again just to be sure im on correct recovery.
But still im not able to flash CR Droid i get error 7
EDIT Never mind Flashed correct TWRP flashed rom installed and formatted data now booted

BETA: LuisROM with patched 4.9.215 kernel
Hello,
for testing users. i have pached the samsung kernel from patchlevel 4.9.112 up to 4.9.215. Here is the fist build for testing. I can´t see major bugs. Please report me any issues.
Download Build: http://luis-builds.de/downloads/lin...-20200303-gts4lvwifi-v6.3-LuisROM-4.9.215.zip
Changelog: http://luis-builds.de/downloads/lin...)(gts4lvlte)/changelog_gts4lvwifi_4.9.215.txt
Have fun!
Cu Frank

signature spoofing permission to enable MicroG
Coming from LOS, I installed this ROM on my tablet to try out MicroG. (Great ROM btw, faster and more stable. Great work!) For MicroG, one needs signature spoofing support, which is not available in LOS, but should be built-in in the crdroid ROM, hence the switch.
Unfortunately, there seems to be something wrong with signature spoofing. When I check its status in the Signature Spoofing app, it does report back as enabled (see screenshot "Signature Spoofing check"). When I do the self-check in the MicroG app, I get the same result but MicroG doesnt seem to be getting the permission to do signature spoofing (see screenshot "Self-check MicroG", unchecked boxes). It reports : "This is a strong indicator that the ROM does support signature spoofing, but requires further action to activate it. Please check the documentation on which steps might be required."
I tried in settings, applications, permissions to give the MicroG the signature spoofing permission. The permission is there, but I can't seem to add applications to it. Also checked developer options, but couldn't find anything there, nor in a thorough search of information on signature spoofing and microg. Maybe I'm missing something really simple here, maybe it's something completely different. It just feels like I'm really close.
So I'm here to ask whether anyway knows which extra steps might be required in this ROM to give the MicroG app the permission for signature spoofing.
Any help would be greatly appreciated.
Ekjaker

Ekjaker said:
Coming from LOS, I installed this ROM on my tablet to try out MicroG. (Great ROM btw, faster and more stable. Great work!) For MicroG, one needs signature spoofing support, which is not available in LOS, but should be built-in in the crdroid ROM, hence the switch.
Unfortunately, there seems to be something wrong with signature spoofing. When I check its status in the Signature Spoofing app, it does report back as enabled (see screenshot "Signature Spoofing check"). When I do the self-check in the MicroG app, I get the same result but MicroG doesnt seem to be getting the permission to do signature spoofing (see screenshot "Self-check MicroG", unchecked boxes). It reports : "This is a strong indicator that the ROM does support signature spoofing, but requires further action to activate it. Please check the documentation on which steps might be required."
I tried in settings, applications, permissions to give the MicroG the signature spoofing permission. The permission is there, but I can't seem to add applications to it. Also checked developer options, but couldn't find anything there, nor in a thorough search of information on signature spoofing and microg. Maybe I'm missing something really simple here, maybe it's something completely different. It just feels like I'm really close.
So I'm here to ask whether anyway knows which extra steps might be required in this ROM to give the MicroG app the permission for signature spoofing.
Any help would be greatly appreciated.
Ekjaker
Click to expand...
Click to collapse
I am not familiar with MicroG but a brief search seems to indicate that it is sort of replacement for gapps and that it has a forum of its own in XDA. Have you tried checking there? It sound like an interesting concept and I'd like to learn more about it. Why is signiture spoofing needed?

lewmur said:
I am not familiar with MicroG but a brief search seems to indicate that it is sort of replacement for gapps and that it has a forum of its own in XDA. Have you tried checking there? It sound like an interesting concept and I'd like to learn more about it. Why is signiture spoofing needed?
Click to expand...
Click to collapse
I haven't tried the forum there, as the problem seems to be related to settings in the ROM, as the error message states. Ofcourse, I did some searches there and on other forums for information specific to this issue, but wasn't able to find anything useful. Which is why I tried here. I'll leave my question here for some time, giving people the time to respond. If that doesn't work out, I'll try in the other forums. But I'm afraid they'll just point be back to this forum.
About your question, MicroG is indeed a replacement for gapps, cutting you of from the all-seeing eye of Google, but without losing (too much) functionality. Privacy is why you would go for it. MicroG needs signature spoofing so that its apps can present themselves as official Google apps. You can find more info on signature spoofing here and here. More info on MicroG can be found here.

I'm in your previous ROM with Android 9.0. Can I do a dirty flash with this ROM or do you have any specific recommendations?

I followed you installation instructions. Got twrp installed and flashed your ROM. Now it is stuck in the boot animation for hours.
I tried flashing the ROM only. Tried with simultaneously flashing opengapps and tried with wiping data before rebooting.
All of them resulted in the same thing. Device stuck in the boot animation

Did you format data instead of just wiping? To get out of boot loop, hold down both volume keys, insert USB cable, then press and hold down power key. It will put you into boot loader mode so you can re-flash.
BTW, when in TWRP, make sure to select ROM zip, then add OpenGapps zip, then add Majisk zip. Reboot after all 3 have been installed.

Yeah I stumbled over the format data. I just wiped instead of formating. Now it worked and booted succesfull.

great Rom thank you !
And thank you for your Work to keep it up to date!

I had a hard time installing this rom, none of the v6.4 roms worked.
two roms failed to update vendor image, error 7
one rom failed to update system image, error 7
I have been running Luis Android 9 rom before, tried wiping, formatting, different twrp versions etc.
Updating via twrp this version worked:
crDroidAndroid-10.0-20200303-gts4lvwifi-v6.3-LuisROM-4.9.215
after booting I was able to do an online update, got version 20200316 running now.

@8224Freak Is there a way to change the quick settings icons to black? Whenever I change the accent colour to anything else than white the icons are white instead of black which looks worse than the default black. Also the rotation animation is not working.

churchner420 said:
@8224Freak Is there a way to change the quick settings icons to black? Whenever I change the accent colour to anything else than white the icons are white instead of black which looks worse than the default black. Also the rotation animation is not working.
Click to expand...
Click to collapse
Aww, come on, you must be able to find a smaller nit than that to pick!!

Does Dex (desktop mode) work with this ROM?

Hi,
I installed this great rom.. but I just wanna be sure.. is it needed to flash your kernel as well if I want to use it, or is it already in included in this rom?
same question about updating.
thanks for answer.

[ROM][A515F/DS][OneUI 3.1 - S20 Port] Just4Fun v1

HELLo everyone...
After several weeks, months and before Android 12 released, i decided to share this ROM to this A51 community. Hopefully you guys enjoy it and don't offend me if the ROM is bad, so....let's get it ON.
Things to do before flashing:
1. Make sure you're on binary 5 (this ROM tested and using binary 5 vendor, so to avoid any broken or whatever error flash your device with latest firmware).
2. Backup your IMEI (highly recommended).
Flashing:
1. Clean flash is recommended. Flash kernel, flash J4F vendor and system.img, flash multy disabler (if necessary) then full wipe and also you can perform "typing YES" format. Reboot to recovery again, then flash as usual you guys always do (Magisk etc.).
ROM Features from S20 and Note 20 line up:
1. Samsung Dex (not full features coz need fix at kernel level).
2. Flagship live blur
3. Flagship edge lighting style
4. AirCommand (S pen)
5. LiveDrawing
6. Multy screen resolutions (HD+ - FHD+ - WQHD+)
7. 1000++ system fonts
8. Flagship sound quality and effects
9. Camera features unlocked (pro video etc.)
10. All original A51 features
11. Common tweaks here and there and so many possibility to unlock another S20 features
Bugs:
Minor glitch in pro mode video, and not really remember and deep testing everything, but hopefully still acceptable (hopefully ) but yeah..nothing's perfect, if you found one let's discuss together in A51 telegram group: https://t.me/samsunga51
Hall of Fame:
@MrWaehere for his awesome CRB kitchen
@VDavid003 and his rom TreeUI for my inspiration and countless help
@Yillié and his OFox recovery and also countless help and advise and ideas
@BlassGO and his Dynamic Installer, patches, advise and countless contributions (thanks for making AirCommand even greater lol)
@manudinath and his projects.
@Winb33 for fonts mod
@topjohnwu for Magisk
@ianmacd for multy disabler and TWRP
Stock Kernel Source
PM me if i forgot to mention someone.
Advise and Tips:
- It's normal during first boot if lags occurs, give the ROM some times to settle, finish your setup, update your apps and you good to go..
- It's better to avoid update in Galaxy store related to system app, such as MDE Service Framework, Samsung Core Services etc. It might causing conflict due to mixed up firmware. But anyway it's up to you.
- Please do not complain regarding app missing (getting debloated) and related to debloat. Because it's very hard to acomodate every person's taste. Bloatware is very Objective and absurd for each person and I know it's supposed to be using Aroma installer or any script but i don't have time that much to do that.
Download link:
**when you click this link and downloading, that's mean you're agree to all the consequences and i'm not responsible to anything - do with your own risk**
LINK

Pero peeps. Sorry for not being able to test all the stuff properly xD.

Yillié said:
Pero peeps. Sorry for not being able to test all the stuff properly xD.
Click to expand...
Click to collapse
nah, you have doing so great/ thank you s much for everything.

Testing .

perro

Ole its already, nice

Quick question, what am i supposed to select while flashing J4F.img in TWRP, boot, recovery, optics img, prism img or super.

@jagpanzer Please check your PM inbox. Thank you.
-Regards: Badger50

BlassGO said:
Ole its already, nice
Click to expand...
Click to collapse
Ia possible wirh This vendor run fingerprint perfectly in havoc

Badger50 said:
@jagpanzer Please check your PM inbox. Thank you.
-Regards: Badger50
Click to expand...
Click to collapse
If run for You send details my friend

Someone knows how to pass CTSprofile in magisk with this rom?

gobblefunk said:
Quick question, what am i supposed to select while flashing J4F.img in TWRP, boot, recovery, optics img, prism img or super.
Click to expand...
Click to collapse
system and vendor.

BlassGO said:
Ole its already, nice
Click to expand...
Click to collapse
mhm...thanks for everything

jagpanzer said:
system and vendor.
Click to expand...
Click to collapse
Kernel 11 support this ROM?

Magisk 23.1
Download Magisk 706a4922 alpha apk
Download File Magisk 706a4922 alpha apk
apkadmin.com

Changelog magisk 23.1
DOWNLOAD VERSion ALPHA:
Magisk v23.1 (706a4922-alpha)
Changelog:
• Switch to zygisk to execute the deny list,
• Magiskhide has been completely removed
• Denylist Added
• Restart to take effect after changing the switch state of zygisk
• Major changes, some problems may occur, temporarily not pushed to the update channel
Others changes in APK:
[General] supports pure 64-bit devices
-[General] Support Android 12 emulator
-[Zygisk] code injection framework
-[General] Remove MagiskHide
-[General] Support simulator loading module
-[MagiskBoot] supports zImage format
-[MagiskBoot] Add zopfli encoder
-[MagiskInit] supports boot configuration
-[App] Repair installation function will now check whether the script under /data/adb/magisk/ is not updated
-[MagiskInit] supports some Meizu devices
-[MagiskSU] If supported by the kernel, use isolated devpts
-[MagiskSU] Fix pts configuration code, no additional sepolicy rules are now required
-[MagiskBoot] supports v4 boot image header format
-[MagiskInit] Support some OnePlus and Opal devices Oplus.fstab
-[App] The update module needs to be restarted, mark deletion is not allowed
-[App] Delete online warehouse
-[App] Add mount information to the saved log file
-[App] Adapt to Android 12 API level
-[App] Display running waiting pop-up window when hiding/resuming the application
-[Stub] Open source obfuscation function
-[Script] View and display the sepolicy rule folder of the module
-【App】Hide the screen overlay when you need to pop up the window. Android 12+
-[App] Delete the floating bottom bar and change it to a general bottom operation bar
-[General] Support compilation cache
-[General] Added rejection list function
-[App] Delete DoH
-[App] Delete SafetyNet

Can you please also make this rom for M30s ??
Because both have similar specs and same soc !

Bluetooth connect error

hacker812c said:
Kernel 11 support this ROM?
Click to expand...
Click to collapse
during testing i only test with BF2. you can try
Arya1999 said:
Can you please also make this rom for M30s ??
Because both have similar specs and same soc !
Click to expand...
Click to collapse
sorry, no time.
Inomjon6940🇺🇿 said:
Bluetooth connect error
Click to expand...
Click to collapse
last time i try with old BT 4.0 earphone was fine and also BT call. will test again, on last build i've made changes and could be broke something

Development [ROM][11.0_r68]JAGUAR ONEPLUS 9 Pro OFFICIAL V33 Updated June 7, 2023

TELEGRAM CHANNEL ADDED: HERE
TELEGRAM CHAT GROUP: HERE
Jaguar is available on locked bootloader with working root (Magisk)
SAFETY NET PASSING FIXED AS OF Version 19 (confirmed)
Instructions Here
You can actually use alarm when the phone is shut down. It would boot 2 minutes prior to scheduled time and trigger the alarm on time
This is official build of Jaguar Rom.
I have been building Android roms since 2012 for various devices including multiple Sonys, Lenovo Zuk, Oneplus 3, Oneplus 5 and Oneplus 6 and Oneplus 8 series. You can check my Oneplus 8 or Oneplus 8T or Oneplus 6 or Oneplus 6T or Oneplus 8 Pro threads.
Jaguar rom is focused on hardening of AndroidOS and kernel. As such, the rom has hardened bionic, art, framework and tightened security.
1 Rom control with custom Power options, Statusbar, Buttons, Navbar, Quicksettings, Lockscreen, Notifications, Gestures, Themes etc...
2. Heavily modified Art, Bionic System/Vold and System/Security
3. Telephony response to Type Zero sms ('silently acknowledged') disabled
4. Toggle to disable Captive Portal logging.
5. Speakerphone proximity sensor toggle - could be set to automatically switch to speaker when not at the ear
6. IMEI and phone numbers hidden in About menu
7. Built-in encrypted DNS providers, such as: Cloudflare (US); LibreDns (Germany); AdguardDns (Cyprus); and PowerDns (Netherlands)
8. Wakelock and Alarmblocker
9. Fully working Call recording with the button visible in Dialer
10. Deskclock app modified to work with PowerOn alarm. The app will boot the phone 2 minutes before scheduled time to trigger the alarm on time
11. Default Dark mode
12. All regular customizations plus. You tell me which feature is missing.
13. Prebuilt Magisk 23 (coming soon to 9 Pro). You wouldn't have to flash it, just need to install Magisk manager.
Install instructions (first time use)
OOS 11 in both slots. This is not a Jaguar requirement, but rather a universal one for any custom rom, including Android 12.
Keep in mind, MSM takes care of one slot only. You need to manually install OOS-11 into another slot. Either boot into system (after MSM) and install OOS-11 by using a local option or boot into TWRP and install OOS-11 again. If there is no suitable OOS-11 for your device (branded etc), use Lineage's partition copy method. Link here
1. Fastboot flash recovery images:
Code:
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
2. Reboot in recovery (TWRP), now Lineage type, sideload and flash the rom, factory reset and reboot.
If you want Gapps on Vanilla (not necessary on Full version), they should be flashed before the first boot into system, i.e., after flashing the rom, reboot in Recovery (mandatory) and flash Gapps.
When downloading from XDA or Android File host, put your browser in incognito.
All Releases ARE in post #3
XDAevDB Information
JAGUAR R, ROM for the OnePlus 9 Pro
Contributors
optimumpro
Special thanks to @Warrkill for testing
Kernel Source Code: HERE
ROM OS Version: 11.x R
ROM Kernel: Linux 5.x
ROM Firmware Required: OOS11 in both slots
Based On: AOSP/Lineage/DirtyUnicorn/Crdroid
Version Information
Status: Stable
Stable Release Date: 2021-01-26
Created: 2022-01-26
Updated: 2023-06-07
Credit: AOSP, Lineage, DU, Crdroid, CalyxOS

The rom could be used on locked bootloader with ROOT (donate feature) with or without Gapps.
The benefits of LOCKED BOOTLOADER combined with WORKING AVB-2 protection are:
Get your DRM L1 certificate back. Most banking apps (if not all) will work with or without Magisk: you cimply get a warning 'your devices is rooted', but you can proceed to login
Security: Nobody and nothing can modify Kernel, Recovery and Virtual Partitions without triggering a red screen of death with the message 'your device is corrupted and cannot boot'.
At that point, the only option is to unlock bootloader. But, if a user had previously disabled OEM unlock in Developer settings, then unlocking becomes unavailable, and so does flashing via fastboot. In other words, if your phone gets into the hands of an adversary, their only option is to use MSM tool to make the phone work again, but no access to your data or any other partition.
The rom can also allow you to flash Magisk on locked bootloader. If interested, send me a PM.
Some screenshots of the rom (from Oneplus 8 thread): HERE

WHEN DOWNLOADING FROM XDA, PUT YOUR BROWSER IN INCOGNITO
For Indian Users Only: If you don't have 5G, that means that you have an older handset and Indian carriers didn't provide their modem configuration to Oneplus in time. In this case, use QPST method which has been confirmed working
June 7. New Release V-33
1. June security patches
2. Android r68
3. Updated webview
4. New 'about Jaguar' section
5. New system-wide accents added: total over 70
6. Forced disable AGPS toggle now disables PSDS servers too
7. Access to Radio preference in 'about phone'
8. Option for figerprint icons to take system-wide accents
9. DocumentsUI/Files now can set homescreen shortcuts for most files
Dirty flashing on a previous release is fine
Download rom V33 VANILLA: Here
Download rom V33 FULL: Here
May 7, New Release V-32
1. May security patches
2. Android r67
3. Amoled black switch (for dark mode)
4. Sometimes missing SMS fixed
5. Bionic and Art updated to latest upstream (Android 13)
6. Gray accents darkened
7. Updated webview
8. InCall UI now takes selected system-wide accents
9. Battery Bar centered.
Flashing on top of a previous release is fine
Download rom V32 VANILLA: superseeded
Download rom V32 FULL: superseeded
April 12. New Release V-31
1. April security patches.
2. Android r66
3. Toggle to disable AGPS
4. Toggle to disable Direct Share
5. Number of users increased to 32
6. Webview to 112.x
7. Missing OneplusDoze app included
8. No phone ID sent to servers when AGPS used
9. Shelter integrated as Work Profile Manager
10. No more statusbar icons cut off when burnin is shifting
11. No more ghost fingerprint icon
Dirty flashing on top of a previous release is fine
Download rom V31 VANILLA: Here
Download rom V31 FULL: Here
Recovery (UNZIP to INSTALL): Here
March 22. New Release V-30.1
1. Fixes a bug (not attaching photos in messengers) introduced in V30
2. Fixes a long press on Data QS toggle.
Dirty flashing is fine on a previous release
Download rom V30.1 VANILLA: Here
Download rom V30.1-FULL: Here
March 16. New release, V-30
FOD Issue has been Fixed
1. FOD non-wakeup issue has finally been fixed
2. March security patches
3. Android r65
4. Internal Firewall icon shown in status bar when an app access is denied
5. GPS does not turn automatically during emergency call unless enabled by user
6. Updated Webview
7. Some new ringtones/alarm/notification sounds added
8. Bug fixing
Dirty flashing on a previous release is fine
Download rom V30 Vanilla: Removed see above
Download rom V30 Full: Removed see above
February 7. New Release V-29
1. February Security patches
2. Android r64
3. Ability to display true app icons in Statusbar/Lockscreen Notification
4. Sound pulse: new placing options
5. Updated Opencamera
6. Webview to 109
7. Adaptive network connectivity (battery saving feature)
8. Fixed network traffic arrows
9. Fixed charging sounds - Connect/Disconnect
Download rom V29 VANILLA: Here
Download rom V29 FULL: Here
January 5. New release V-28
1. January security patches
2. Android r63
3. Updated kernel
4. Bionic ported from Android 13
5. Smart pixels removed (poorly implemented and unfixable)
6. Trustcor certificates removed
Dirty flashing on a previous release is fine
Due to some changes in kernel, and the fact I don't have any of the 9 series, there is a slight chance this version may not boot. If so, please run a logcat.
Download rom V28-FULL: Here
Download rom V28-VANILLA: Here
December 8. New release V-27
1. December security patches
2. Android r62
3. Full internal Firewall (In Settings/Network & Internet)
4. Multi-resolution for Gcam
5. Background notification opacity
6. Webview to 108
7. Reworked Connectivity settings: make sure it is OFF in Settings/Network & Internet, then toggle airplane mode OFF/On
Dirty flashing on a previous release is fine
Download rom V27 VANILLA: Here
Download rom V27 FULL: Here
November 10. New release V26:
1. November security patches
2. Android r61
3. Dialer, Contacts, Calendar and Calculator are aligned with system-wide accents
4. Screen flickering leftovers on FOD unlock are completely gone
5. Smart pixels no longer disable permissions
6. Toggle to turn on/off screenshot saving (Settings/Privacy)
7. Webview to .107
Download rom V26 VANILLA: Here
Download rom V26 FULL: Here
October 7. New release V-25
1. October security patches
2. Android r60
3. Fingerprint brightness flickering - addressed
4. Webview 106.x
5. Some selinux denials (system_suspend) - addressed
Dirty flashing is fine on a previous release
Download rom V25 VANILLA: Here
Download rom V25: FULL: Here
September 8. New release V-24: major update
1. September security patches
2. Android r59
3.Ability to change clock size in statusbar and quicksettings
4. Rom is now compatible with Magisk 25 and Lsposed
5. Fingerprint enrollment fixed
Dirty flashing is fine on previous releases
Download rom V-24 VANILLA: Here
Download rom V-24 FULL: Here
August 7. New release V-23
1. August security patches
2. Android r58
3. 5G network options in OneplusSettings
Dirty flashing is fine on a previous release
Download rom V-23 VANILLA: Here
Download rom V-23 FULL: Here
July 8. New release V-22
1. July security patches
2. Android r57
3. Clear clipboard quick setting toggle
4. Metro audio player
5. Many under the hood improvements
Download rom V-22 FULL: Here
Download rom V-22 VANILLA: Here
June 7. New release V-21:
1. June security patches
2. Android r56
3. Automatic sleep/suspend mode (scheduled by a user) in Settings/Battery
4. 'Internet permission missing' issue with several apps fixed. Now, all apps including Googleplay, as well as third party apps, have no problems connecting to the internet (no F/C)
Dirty flashing is fine on a previous release
Download rom V21-VANILLA: Here
Download rom V21-FULL: Here
Download recovery: Here
May 29. New release V-20.2
1. Captive portal now On/Off
2. Addressed some apps crashing with message "missing Internet permission'
3. HBM fixed, now fully working (Auto HBM is recommended with trigger set to 40000 lux in Oneplus Settings)
4. One shot auto-brightness
5. In-call volume increased for Speaker and Headset
Dirty flashing is fine on a previous release
Download rom V20.2 VANILLA: Here
Download rom V20.2 FULL: Here
Recovery: Here
May 12. New release V-20.1
1. Redone adaptive brightness
2. Call recording (bug introduced in V-20) fixed
3. Captive portal: added 3 options Standard (Google), Alternative and Disabled) and moved to Settings/Network
4. Fingerprint icons and colors made more transparent, so, now fingerpint works flawlessly.
Dirty flashing is fine on a previous release
Bootlooping issue has been fixed. You can use this user-debug full version or wait for June release.
May 7. New release, V-20
1. May security patches
2. Google r55
3. Recovery fixed to have 'yes/no' prompt on signatures mismatch (for Magisk). Recovery will install automatically, just reboot to flash Magisk etc.
April 29. New release V-19.1
1. Wakelock blockers in kernel
2. Jaguar version is now displayed in About phone
3. Choice for temperature units F/C for lockscreen battery info
4. A bunch of other under the hood improvements
5. Fixes array mismatch in fingerprint
Dirty flashing is fine
Download rom V19.1 VANILLA: Here
Download rom V19.1 FULL: Here
April 16. New release V-19.1:
1. AOD is fully working (see screenshot Here)
2. Experimental feature: toggle to spoof Pixel to get unlimited storage for Google Photos (in Settings/Accessibility)
Dirty flashing on a previous release is fine.
Download V-19.1-VANILLA: Here
Download V-19.1-FULL: Here
Recovery: Here
April 7: New release V-19. Safetynet is fixed, confirmed by an Oneplus 8 user here with detailed explanation here
1. April security patches
2. Google r54
3. Switched to AOSP webview 100.x
4. Working with Zgisk (confirmed)
5. Seedvault is back
Dirty flash is fine on a previous release
Download rom V19-VANILLA: Here
Download rom V19-FULL: Here
Download recovery: Here
March 12. New release, V-18
1. March security patches
2. Android r53
3. User build
4. Updated kernel
5. Options to choose between Bromite and Vanadium webivew
6. Optional torch flashing on incoming calls
7. Night display renamed into Display calibration
8. Full version of the rom added
Dirty flashing is fine on top of a previous release
Download rom V-18 Full version: Here
Recovery: here
Download rom V-18 Vanilla Vanilla version : Here
Recovery: Here
February 10, 2022. New Release - V-17
1. February security patches
2. Android r52
3. TWRP recovery replaced with a Lineage type
4. Toggle to hide statusbar clock (when launcher is active)
Dirty flashing is fine on top of a previous release
Download rom V-17: HERE
Boot: HERE
Vendor_boot: HERE

Reserved.

Reserved

Badass

I'm interested in flashing but want to know about the locked bootloader feature. I'd seen that it's been a possibility for some time but not sure I've understood what I've seen about it, and you say it is a donate feature. Does that mean we need to donate, then get a flashable file that would prevent bricking upon locking the bootloader, or is it simpler/more complex than that?

thats_the_guy said:
I'm interested in flashing but want to know about the locked bootloader feature. I'd seen that it's been a possibility for some time but not sure I've understood what I've seen about it, and you say it is a donate feature. Does that mean we need to donate, then get a flashable file that would prevent bricking upon locking the bootloader, or is it simpler/more complex than that?
Click to expand...
Click to collapse
Yes. The process is as easy as it gets: you just flash one file in fastboot and relock.
This issue has been run by XDA moderators and their official response was: this donate feature is allowed, see HERE from my Oneplus 8 Pro thread:
About donation features: YES, IT'S ALLOWED! Sometimes. Shocker, I know. The moderation team may be tasked with – among many many many other things – shutting down projects that have only the goal of making money but this does not mean that donation features are forbidden. We expect that core features and most important functionality of any release remains free. We also understand that developing software is hard work which should be rewarded. Our goal is to find a balance and we do this together, as a community. To achieve this we often work with developers to find the best outcome for everyone.
Click to expand...
Click to collapse
So, if anyone is interested in relocking feature, please contact me via PM.

optimumpro said:
Yes. The process is as easy as it gets: you just flash one file in fastboot and relock.
This issue has been run by XDA moderators and their official response was: this donate feature is allowed, see HERE from my Oneplus 8 Pro thread:
So, if anyone is interested in relocking feature, please contact me via PM.
Click to expand...
Click to collapse
Great to know, just finding the time to flash and restore is what's holding me back, but will try it out soon

Bro, I appreciate your work on rom. However, few bugs I should mention:
1. There is a bug that recent key button doesn't work. I tried everything. Even in gesture it doesn't work.
2. Speaker sound is bit low compare to OOS 11.
3. Wifi speed is just bit slower compare to OOS 11.
4. Some apps crashes like Tiktok, Skype and Banking app.
other than that, good rom. Nice job

break.cold said:
Bro, I appreciate your work on rom. However, few bugs I should mention:
1. There is a bug that recent key button doesn't work. I tried everything. Even in gesture it doesn't work.
2. Speaker sound is bit low compare to OOS 11.
3. Wifi speed is just bit slower compare to OOS 11.
4. Some apps crashes like Tiktok, Skype and Banking app.
other than that, good rom. Nice job
Click to expand...
Click to collapse
You probably installed another launcher. Starting from Android 10, only one launcher can have recents. You need a Magisk module that will switch to your specific launcher and then you'll have recents.
WIFI: My home internet connection speed is 300MB. My PC is hardwired and shows about 330/330MB, my Oneplus 8 shows around 310/290MB. See screenshot:

optimumpro said:
You probably installed another launcher. Starting from Android 10, only one launcher can have recents. You need a Magisk module that will switch to your specific launcher and then you'll have recents.
WIFI: My home internet connection speed is 300MB. My PC is hardwired and shows about 330/330MB, my Oneplus 8 shows around 310/290MB. See screenshot:
Click to expand...
Click to collapse
I used stock launcher meaning the one come with rom. Didn't install any other launcher.
I even tried to reinstall rom with Gapps from scratch but still problem exist.

optimumpro said:
Yes. The process is as easy as it gets: you just flash one file in fastboot and relock.
This issue has been run by XDA moderators and their official response was: this donate feature is allowed, see HERE from my Oneplus 8 Pro thread:
So, if anyone is interested in relocking feature, please contact me via PM.
Click to expand...
Click to collapse
in future jaguar rom updates you release, it is posible to update with dirty flash in relocked bootloader?
Also, how much time you hoping to support this op9pro rom? You will release only Security patches?

bugac said:
in future jaguar rom updates you release, it is posible to update with dirty flash in relocked bootloader?
Also, how much time you hoping to support this op9pro rom? You will release only Security patches?
Click to expand...
Click to collapse
After relocking, updates are done the same way as with unlocked bootloader. You'd only need to unlock, if you switch to another rom.
9 Pro will be supported for longer than Oneplus 6s and 8s. Android 12 will replace 11 eventually, probably around r30.
break.cold said:
I used stock launcher meaning the one come with rom. Didn't install any other launcher.
I even tried to reinstall rom with Gapps from scratch but still problem exist.
Click to expand...
Click to collapse
Gapps are known to override stock launcher. Launcher3 included with Jaguar has no problem accessing recents.

optimumpro said:
Gapps are known to override stock launcher. Launcher3 included with Jaguar has no problem accessing recents.
Click to expand...
Click to collapse
So what do you recommend me to do?

break.cold said:
So what do you recommend me to do?
Click to expand...
Click to collapse
Install another Gapps package that doesn't override launcher. Or open a configuration file in your current gapps zip, There will be a list of apps to install. Find a launcher (Google or whatever it is) and either delete the line or put an '#' at the beginning of it.
Or find the same of the launcher in Settings/Apps and Notification and install a Magisk module that switches recents to the new launcher.

optimumpro said:
Install another Gapps package that doesn't override launcher. Or open a configuration file in your current gapps zip, There will be a list of apps to install. Find a launcher (Google or whatever it is) and either delete the line or put an '#' at the beginning of it.
Or find the same of the launcher in Settings/Apps and Notification and install a Magisk module that switches recents to the new launcher.
Click to expand...
Click to collapse
I use OpenGapps.

break.cold said:
I use OpenGapps.
Click to expand...
Click to collapse
Don't install the full package. Do Pico and then install additional apps you need as regular apps.
This is not a rom problem. As I have already said, Android frameworks allow only one app to be registered for Quickstep recents. To have another launcher, you must use Magisk module that does the switching.

break.cold said:
I use OpenGapps.
Click to expand...
Click to collapse
Here is the module. Get the name of your current launcher from Settings/Apps & Notifications, and use the module.

optimumpro said:
Here is the module. Get the name of your current launcher from Settings/Apps & Notifications, and use the module.
Click to expand...
Click to collapse
Ok. Thank you I will try.