[Custom Rom]
[K-Rom M8-V5] [Magisk](all regions) Huawei Mate 8 -
NXT- B592 - EMUI 5.01 - Android 7 -
Based on Huawei Firmware
B592 (China) and KankVip B592 V3
On TWRP backup basis.
Developed and tested on this device:
Huawei Mate 8 (NEXT)
Model number: Huawei NXT-L29
Build Number: NXT-L29C432B581
-OTA updated
without branding, with root and root access.
TWRP recovery
Mods:
- Call Recorder
- KangVip Advanced Settings
- Autostart administration in the
telephone manager
- Viper 4 Android FX 2.5
- Ad Block Plus
- Immersive Mode
(hide Navbar e. t. c.)
For topicality:
The Google Patch is from 2017-10-05 and the firmware is
Version B592 (Asia)
The deviating specifications in the device information,
have been taken over by the B581 and
guarantee the OTA eligibility for subsequent updates."
Please make a backup of your data with Huawei Backup and TWRP.
The Rom will be installed as if you were trying to restore a TWRP backup.
All your apps remain intact.
Prerequisites:
Firmware B581
TWRP Recovery (from download)
Root is not necessary.
OEM and FRP unlocked
USB Debugging on.
You are familiar with the matter? Then let's go!
Preparation/ Installation:
Download:
Please do not download the MEGA 2017-11-09-M8-K-Rom-V5.rar as "ZIP".
The backup is already compressed.
Unpack and the backup directory:
2017-11-09-M8-K-Rom-V5
to the TWRP Backup folder on the ExtSd.
Installation:
Uninstall these apps, if available:
SuperSu and Busybox.
Restore and reboot the backup in TWRP.
Please do not perform any wipes immediately before and after the event.
In the future, never do a factoryreset.
Depending on the configuration of your existing B581,
the following may still have to be done:
install ************* v5.3.0.apk,
flash in TWRP BusyBox-Magisk-1.25.zip,
flash in TWRP Magisk-permissive-script_v1.0.zip,
for the Kangvip advanced settings.
For Ad Block Plus first install the app and
then the zip's flash.
If the flashing fails, please add the modules in the Magisk Manager App.
Don't experiment with Xposed!
The SafetyNet is lost."
The Rom is partially debloated. Some Google and Huawei apps have been removed.
They can be installed by you if necessary.
That's what you can do with the HiApp.
In the Kangvip Advanced Settings do not use the Addblocker and
"hideNavbar". Both works only on China Roms.
I recommend to fully charge the battery after installation and carry out a calibration.
Since the rom runs with the stock kernel, you can only take a few options
in the k-advanced settings / tune cpu.
With the app in the attachment, you can check it out.
See also the screenshots.
....... and remember: A custom ROM is never as perfect as a stock Rom.
You have to teach him something in between.
Depending on the configuration of your devices, it can of course also be "stuck" somewhere.
I give full support for this, because there is a lot of support between rooted nougat devices and the EMUI
there's no real wedding.
Good luck!
Subsequent rooting with SuperSu is possible with the V5:
Restore the stock boot partition (kernel) from a TWRP backup.
SuperSU.EMUI5-K-Rom.zip flashing.
finished.
Threadupdate: 2017-11-17:
Increase battery life:
I have tested some settings on cpu performance.
By turning off individual cores, the others have to do the work.
It is difficult to predict whether this will cause permanent damage.
Lowering the frequency distributes the load evenly balanced.
The performance loss is only 6% and not noticeable
and the battery life is considerably longer.
You can easily see this on the graph in the appendix.
Test environment:
V. 5 with SuperSu Root
Ex kernel tuner app (beta).
My configuaration is: max power big cores= 1306 / little cores= 807 MHz.
You can create individual profiles and put a widget on the home screen.
I recommend a calibration with "Battery Calibration" from NéMa. It also optimizes the consumption of all available apps.
Thanks to:
[KangVIP]
Chainfire, Stephen (Stericson) + Jmz Software, Lineage OS Team,Team Win RecoveryProject, JRummy and Huawei Technologies Co., Ltd. Greetings to China Mobile Com.
[Custom Rom] Huawei Mate 8 - NXT-L29C432B582 - Custom System Update ("V.6")
- EMUI 5.01 - Android 7 -Tested by @apat26. Quote:
"I tested your ROM on L29C185B582 for a couple of
days and this is working perfect."
On TWRP backup basis.
This update replaces the [K-Rom-M8-V5].
Developed and tested on this device:
Huawei Mate 8 (NEXT)
Model number: Huawei NXT-L29
Build number: NXT-L29C432B582
- OTA updated.
- Without branding, with root and root access.
- TWRP recovery[/SIZE]
Mods:
- Call Recorder
- KangVip Advanced settings
- Autostart administration in the phone manager (PM+)
- Viper 4 Android FX
- Obtaining OTA authorization
I couldn't test if this runs on Firmwares other regions.
I think the v6 is going on all regions on B582.
Quick guide for experienced users:
Please make a backup of your data with Huawei Backup and TWRP.
The Rom will be installed as if you wanted to restore a TWRP backup.
All your apps remain intact.
Conditions required:
- Firmware B582,
- TWRP recovery, (from download, or available from v5 )
- root is not necessary,
- OEM and FRP unlocked,
- USB Debugging on.
All required files are in the download folder.
You are familiar with the matter? Then let's go!
If available, uninstall these apps: SuperSu and Magisk.
A unroot is not necessary. Please do not download the downloads as "ZIP".
Installation:
1. Replace existing boot partition:
"2017-12-M8.B582.stock.kernel.boot"
copy in the TWRP backup directory to the ExtSd and restore.
2. Install update:
"2017-12-M8_B582_AdvS_Xposed_SystemUpdate"
also copy to the TWRP backup directory and restore."
3. Rooting:
- In TWRP mount Internal storage/ system,
- go to: Install, system/ k-rom/ set and install the SuperSU.zip.
- Reboot.
- After starting, take the BusyBox App from the download.
Then please use it to install its binaries.
- Install the PM+ app and bring the autostart administration to the phonemanager.
Iggnore the incompatibility warning.
Do not reboot between steps 1 to 3. Do not wipes before and after.
That's all. The installation is complete.
If Viper or Xposed have not been installed with it, this can be found in the
Advanced settings can be made up for.
Xposed is already active. In case the framework gets disabled,
in the Advanced settings. There's no way use other Xposed versions.
This also applies to SuperSU. They are not compatible with this system.
Both are optimized for this system.
Of course, you can also use Magisk to root later with the instructions
in the v5 thread. (loss of ota authorization)
Xposed does not run under magisk rooting together with the Advanced settings.
It must be used for a successful SafetyNet test, must be completely removed before rooting.
In the Kangvip Advanced settings do not use the Addblocker and "hide Activate NavBar".
Both works only on China Roms.
Hiding the NavBar can be done comfortably with the App "Tiles" from the playstore. (See v5)
In the K-Advanced Settings /tune cpu, some of the following are available.
Modifications of the computer performance possible. Those who need more power can do so.
Testing out the "Power save" options is useless. Did a lot of it.
The Huawei's own energy saving settings cannot be topped.
Good luck!
Thank you very much:
[KangVIP] (Advanced settings),
@Tecalote (SuperSU)
and Chainfire, Stephen (Stericson) + Jmz Software, Team Win RecoveryProject,
JRummy and Huawei Technologies Co., Ltd.
NEW[Custom Rom] [KangVip Rom M8-B592-V4]Huawei Mate 8 - NXT-L29C432B592 - Custom System Update
- EMUI 5.01 - Android 7 -
On TWRP backup basis.
This turns the B582 into a B592.
Developed and tested on this device:
Huawei Mate 8 (NEXT)
Model number: Huawei NXT-L29
Build number: NXT-L29C432B582
- OTA updated.
- Without branding, with root and root access.
- TWRP recovery[/SIZE]
Mods:
- Call Recorder
- KangVip Advanced settings
- Autostart administration in the phone manager (PM+)
- Viper 4 Android FX
- Obtaining OTA authorization
I couldn't test if this runs on Firmwares other regions.
Quick guide for experienced users:
Please make a backup of your data with Huawei Backup and TWRP.
The Rom will be installed as if you wanted to restore a TWRP backup.
All your apps remain intact.
Conditions required:
- Firmware B582,
- TWRP recovery
- root is not necessary,
- OEM and FRP unlocked,
- USB Debugging on.
Downloads: https://www.mediafire.com/folder/2ppn9ewownun5/NXT
You are familiar with the matter? Then let's go!
If available, uninstall these apps: SuperSu and Magisk.
A unroot is not necessary. The download is compressed in zip with Huawei file manager.
Installation:
Extract
"2017-12-18--K_E5_B592_V4.zip,"
copy it in the TWRP backup directory to the ExtSd and restore.
Immediately afterwards, rooting starts with the installation of SuperSuV4 and reboot.
Install the PM+ app and bring the autostart administration to the phonemanager.
Iggnore the incompatibility warning.
Do not reboot between restoring and rooting.
That's all. The installation is complete.
If Viper or Xposed have not been installed with it, this can be found in the
Advanced settings can be made up for.
Xposed is active and stable.
There's no way use other Xposed versions.
This also applies to SuperSU. They are not compatible with this system. Do not change the busybox binaries.
Both are optimized for this system.
In the Kangvip Advanced settings do not use the Addblocker and "hide Activate NavBar".
Both works only on China Roms.
Hiding the NavBar can be done comfortably with the App "Tiles" from the playstore. (See v5)
In the K-Advanced Settings /tune cpu, some of the following are available.
Modifications of the computer performance possible. Those who need more power can do so.
Testing out the "Power save" options is useless. Did a lot of it.
The Huawei's own energy saving settings cannot be topped.
Good luck!
Thank you very much:
[KangVIP], Chainfire, Stephen (Stericson) + Jmz Software, Wraithdu, Team Win RecoveryProject,
JRummy and Huawei Technologies Co., Ltd.
The roms I offer are original Huawei firmware. Only the system was modified by kangvip and me. The kernel are 100% stock. If you like this work you could give a donation to kangvip.
https://www.paypal.me/KangVIP
Please not for me, because I don't take money for it. I created this TWRP backup roms for my use. I love it when these things work. And it does. Now I'll share it with you.
Downloads:
https://mega.nz/#F!1g8QDZqa!F9wV-6oWYUsx70n96Xb3dQ
Disclaimer:
Despite careful elaboration, I cannot guarantee that the execution of this manual will not cause any damage to the device or operating system and therefore I do not assume any liability for any damage or malfunction of the hardware and software! If you are still unsure, follow these steps: Follow the instructions only if you or your device is subject to any conditions (model number, Android version, etc.). Read the instructions carefully and completely, look up unknown terms. Check downloaded files for viruses. Make a backup of important settings and data. Do not follow the instructions if you do not know what you are doing.
These warnings must be logical. Please process my comments correctly.
Discussions, exchange of experiences, tips and tricks
around the topic "KangVip Roms"
are welcome here.
:good:
ChinHon said:
Discussions, exchange of experiences, tips and tricks
around the topic "KangVip Roms"
are welcome here.
:good:
Click to expand...
Click to collapse
Nice to see you here
Waiting for your work with kang b592,,,
Link ? nvm. found will test it soon.
hamadazh said:
Nice to see you here
Waiting for your work with kang b592,,,
Click to expand...
Click to collapse
Comes in about 2 hours.
danterape said:
Link ? nvm. found will test it soon.
Click to expand...
Click to collapse
Open the txt file in the attachments.
w00t w00000t, good job there buddy
Sent from my HUAWEI NXT-AL10 using Tapatalk
ChinHon said:
Comes in about 2 hours.
Click to expand...
Click to collapse
Ok bro, take your time we can waiting more than 2 hours
hamadazh said:
Ok bro, take your time we can waiting more than 2 hours
Click to expand...
Click to collapse
Check out the thread update !!
ChinHon said:
Check out the thread update !!
Click to expand...
Click to collapse
Yeah thank you :good:
I saw this rom abit ago on the euro net, all kang roms will work on any mate 8 version b580 and up all models , all it takes is the custom multi version kernel , I found a few online , but I run dl0017 because I feel its the best and all the diferance is with google framework is install thegoogle apps package. There r multiple ones available , just be sure to remove autonavi location services from the phone too to get proper gps and remove hi suite.
c|nder said:
I saw this rom abit ago on the euro net, all kang roms will work on any mate 8 version b580 and up all models , all it takes is the custom multi version kernel , I found a few online , but I run dl0017 because I feel its the best and all the diferance is with google framework is install thegoogle apps package. There r multiple ones available , just be sure to remove autonavi location services from the phone too to get proper gps and remove hi suite.
Click to expand...
Click to collapse
My rom is a pure system update. It's tuned to the stock kernel. All other partitions remain unaffected during installation. It's not just Kangvip Rom. There are no problems with the Gapps. They do not need to be reinstalled. Many Devs adapt the kernel to the rom, I do it the other way around.
Well the kernel is what differentiates the phone from the OS LOL. U do know u can take the newest b592 kernel and just patch a few lines for it to be accepted and not trip any security features , eg: fingerprint dev opt.
@ChinHon
One question
Do you can overwrite a normal B560 with this backup (v2 or v3)? I saw nothing about of which firmware we can have to install your custom rom.
B.R
franzyroy said:
@ChinHon
One question
Do you can overwrite a normal B560 with this backup (v2 or v3)? I saw nothing about of which firmware we can have to install your custom rom.
B.R
Click to expand...
Click to collapse
The B581 is required, but it does not work with the B560.
I have now successfully rooted the V3 with magisk and stock kernel. Substratum no longer works. We can do without it, too. There are no EMUI themes for this. I didn't keep Xposed with magisk, but the previous installation with K-Settings. Stable here too. Antutu's good at 95,850.
Would this work on asia/ Pacific l29 b585??
i have a mate 8 with b581 can i flash v3? and do i need to wipe?
nikolas60 said:
i have a mate 8 with b581 can i flash v3? and do i need to wipe?
Click to expand...
Click to collapse
Yes you can. Not flash, but as TWRP backup restoring. No wipe, please. It's all in the manual.
c|nder said:
Would this work on asia/ Pacific l29 b585??
Click to expand...
Click to collapse
If you mean the ROM, Pacific definitely. Maybe the 585.
Make a TWRP backup and then test it. If it doesn't work, you just have to restore "boot and system" of your backup.
Related
Hi, latest Sony 14.4.A.0.108 rom for you!
Features is inside screenshoots. Rom is rooted, have superuser, su, busybox...etc, just simple install propertly and enjoy rom! Bye!
Download old stable rom (update 5 is required after installing this rom!):
- https://mega.co.nz/#!dconlALD!EmOWK0lASSlyuTEkyFQBP8jRGpD3tbKWutD4JdHoJfs
Download new stable rom - final rom (03.jul.2015) (do not install any update with this rom!!!):
- https://mega.co.nz/#!AcxllSZa!dO-qrrgWuXeDrU4p_jmpkawZwz5fI83lWiHfD-KrjWQ MD5: 6a5e5de79ad7120db63fc9eb57974450
This final rom is one which I am runing daily, I have removed some boatwares but not all, removed only some which iritating me. So if you need some apks which is missing, just download from here -> https://github.com/munjeni/D5503_14.4.A.0.108/tree/master/system and add to the zip byself! This rom have some optimisations and fixes, dual recovery, cwm munjeni and twrp, to enter cwm hold volume down when blue light start blinking, or hold volume up for twrp when blu start blinking. I recomend linheart+row and my favorite theme aka black theme munjeni which is included only in final rom aka this one. This rom contain kernel from 157 with kernel modules and firmwares from 157... etc, in short my favorite rom dumped directly from my phone using romgen tool, so its tested and definitely stable, just install it right and carefully and enjoy!
* If you have root problems or problems remounting system rw, install this http://forum.xda-developers.com/showpost.php?p=61696951&postcount=531
* If your choice was "debloat rom" trought aroma installer, I have marked google contact & calendar sync in removal list as bloatware, but if you realy want to debloat your rom but kiping google contact & calendar sync you must install folowing zip package -> http://forum.xda-developers.com/showpost.php?p=61894795&postcount=573
How to install:
- first of all you must have your phone updated oficialy to the bootloader, baseband... etc and it must be from 108 rom (your choice how you can do it, but thats needed!) before you gona install our rom! You no need to be rooted since rom is for booth locked and unlocked bootloader!
- wipe data factory reset
- format system partition
- install rom
- install update.1 -> (this fix portrait retouch and give you China Photo editor) NOT REQUIRED ANYMORE !
- install update.2 -> https://mega.co.nz/#!NI4UkAgD!XPGU4WhDsfRXquzaL1wmQDaees-PrtF8SBpIOZgdn_Y (this revert dialog and toast style to stock one ;; fix for timeshift video) NOT REQUIRED ANYMORE !
- install update.3 -> https://mega.co.nz/#!lAZSUISa!09ca_GvuDHh8r9-5M3aAhc3TiDOePj26n79aa7VkTds (unhiden daydream option in settings menu) NOT REQUIRED ANYMORE
- install update.4 -> https://mega.co.nz/#!4JJFTYjZ!IjQsoCdJhSFBZFs_hyQrEHudBkaCZZfiyhG4-wHm7sc (usb serial support and ftdi sio ; new task killer) NOT REQUIRED ANYMORE
- install update.5 -> https://mega.co.nz/#!1FoUkLZB!SEpBPmiV7GC6D0CeXdej-neqwOsfMelrFTxY5teKFp8 (ntfs support) INSTALL ONLY IF YOU HAVE old stable rom, do not use with final rom!!!
- do not replace default busybox which comming with this rom since you will broke root!
For best experience I have compiled Lionheart cpu governor, you can use them in combination with row iosched to get very smooth ui and very good baterery life for daily usage! I have runing rom 13 hours + 1 hour with phone usage and have almost 88 percent batery power remain
4k is not working and allso I not going to get them working!(I have removed 4k from camera widget). I sugest you to not use any external camera mod since our one is totaly stock based and I have not replaced anything related to stock camera, every camera part is carefully patched, so if you want any camera mod than do not go here to report something which probably will not work after your replace or you get battery drain fast after replace! Allso if you have installed something which not comming from our rom than allso please do not report anything! Everything is tested and everything working very good!
If somebody have problems installing rom (error 7 during installation):
- Remove first 2 lines (ASERT) from updater-script than try again
Hoorraaayy, you are back.
Thanks for the update man, will download and try ASAP,
Also I was looking for an update for multiboot, that would be amazing.
Thanks for your great work, and looking forward to seeing more of you
Probably not since my microphone is broken and probably I must get new model soon (z3 mini)...soon. In any way I am sharing the best rom to all :laugh:
Thanks for sharing this ROM, looks very promising!! Is it based on the brand new Sony firmware 14.4.A.0.108 from August, or on the one that is available since June?
With best regards, maris
Yes, D5503_14.4.A.0.108_latest one from august
Nice to have you back, keep cool
Hello, welcome back! Have you made a new kernel? Or do you just add the new Governor?)
John.D.. said:
Hello, welcome back! Have you made a new kernel? Or do you just add the new Governor?)
Click to expand...
Click to collapse
Just created Lionheart governor module which is insmoded on boot time trought install-recovery.sh!
munjeni said:
Just created Lionheart governor module which is insmoded on boot time trought install-recovery.sh!
Click to expand...
Click to collapse
Brilliant!. Is there support init.d ?
I'm still using your older rom, because I didn't want to loose the Led and Privacy Guard functionality. Now I'm finally able to update! :victory:
Thank you very much Munjeni!
what are the differences with the old .108?
John.D.. said:
Brilliant!. Is there support init.d ?
Click to expand...
Click to collapse
Yes, its allready there!
phantomEVO said:
what are the differences with the old .108?
Click to expand...
Click to collapse
You can see notification trought Sony PC Companion software about 108 update, inside notification window you can see changelog about new update (just open SPCC before you install latest rom)!
Maybe silly question but anyway, twrp recovery is ok right? Or flash through cwm only?
You can try
I followed all steps for installation and every time it fails.
vriz27 said:
Maybe silly question but anyway, twrp recovery is ok right? Or flash through cwm only?
Click to expand...
Click to collapse
Flashed via twrp and worked flawlessly.
@munjeni
Is it possible to change the loading animation to stock? I noticed that in this rom it looks like this.
any kernel tweaks in this rom?
einfachgaer said:
Is it possible to change the loading animation to stock? I noticed that in this rom it looks like this.
Click to expand...
Click to collapse
Yes, simple open rom zip and replace framework-res.apk with this one https://raw.githubusercontent.com/m...f725b2b6f0/system/framework/framework-res.apk than reflash rom without wiping anything
OyyO said:
any kernel tweaks in this rom?
Click to expand...
Click to collapse
No need since stock rom is performing very fast and I think thats not need
Droidkit OnePlus One Windows
Hey guys iTechy21 here and I am glad to announce I have a NEW project I'm working on to make an open source toolkit made from c# to allow easy development for other devices. This project will aim to support as many devices as possible with different toolkits for different devices therefore unifying the experience between them.
This will also be 100% open source when fully complete and is released under the GPLV3 licence (apart from the stuff I did not develop e.g. Custom Recoveries, root.zip, adb / fastboot and stock software all rights go to their respective owners).
Features
Support for any android version and Rom
Full Backup and Restore of apps + data (Nandroid is in the works...)
Unlock / Lock your bootloader (removed locking due to possible issues)
Flash a custom recovery (all supported including stock)
Shows attached device(s) in status bar
Advanced CMD mode for power users - type any ADB Command you want!(Will be reimplemented!)
Booting the device into and out of fastboot with a button click
Flash back to stock (Lollipop!) and keeps your bootloader unlocked
To come
Flash 100% stock DONE!
Save backups with custom names DONE!
Install APK's through ADB DONE!
Flash zip via recovery commands DONE!
Improve UI to make it look cleaner...
Backup the EFS Partition (will be coming Soon) DONE!
Log screen to help amateurs with adb learn (and also output errors to be more verbose) Abandoned due to too many issues
Ability to change colour theme from light to dark and the colours (coming Soon™)
Improve OTA system (continuous)
I am accepting requests if they are not too obscure to find out (even better if you find a way to do it as it cuts down on my research time which I don't have a lot of )
Legal
This is an unofficial toolkit made by an independent developer who has no association with oneplus apart from the fact that he owns a 64gb Sandstone black phone. I cannot be held responsible for anything that may happen to your phone! Even if it is just exploding, catching fire or just voiding the warranty.
Changelog
Material 0.0.1.5 ) - Major Milestone! - Untested Oxygen OS flashing. Do-so at your own risk! (Might not work not fully tested)
Improved theming
Updates to internal .dll's
Stability improvements
UI Tweaks
More verbosity via dialogue messages
System requirementsTo run this needs an x86 or x64 based system (Not supported on Windows RT)
And version 4.5 of the .NET framework (which is installed upon install if missing (needs testing!) and requires Windows 7 or Higher (sorry XP users )
DownloadsNo Download as no longer maintained and buggyQR for nerds
[QRCODE]http://repo.itechy21.com/toolkit.html[/QRCODE]
Known issuesYou tell me...
XDA:DevDB Information
DroidKit | OnePlus One Windows *STABLE*, Tool/Utility for the OnePlus One
Contributors
itechy, All the helpful folks over at Stack Overflow
Source Code: https://github.com/Droidkit/OnePlus-One/tree/master
Version Information
Status: No Longer Updated
Current Stable Version: V0.0.1.5
Stable Release Date: 2015-09-17
Created 2015-03-16
Last Updated 2015-12-06
FAQ
Q: How do I do X?
A: You click the button corresponding to the action
Q: How do I flash to stock and then unlock the bootloader?
A:
You put your device into fastboot mode.
Once done select your device model (16Gb or 64Gb) and then click flash to stock.
The Bootloader should stay unlocked after the flashing process...
Q: What Roms do this ToolKit support?
A: Any android based ROM with the ADB Debugging interface!
Q: Help it's not working!
A: Try 3 things.
Re-installing the toolkit to re-install the drivers
Enable ADB in the developer settings (tap on build number (in about phone) x times until you get a toast notification)
Update the ToolKit
I found a Bug!
Great and thanks for finding one! I can now hopefully track it down and fix it if you provide the following:
The Computer's OS
What you were doing
How you can reproduce this
Your device
The code from the message that appeared
This will help me track down and hopefully fix the error. And once open sourced these can be reported via GitHub!
Please be aware that messages that just say "HELP" or "IT CRASHED" will be ignored as they don't help...
GOOD JOB .....Bro
kishorparmar said:
GOOD JOB .....Bro
Click to expand...
Click to collapse
Thanks
I hope it isn't too buggy and it works for you
Anyone already try this tool? I want download, but size so damn high
zipperX said:
Anyone already try this tool? I want download, but size so damn high
Click to expand...
Click to collapse
I knew that would be an issue. That's due to the fact it includes all the stock files for CM11S. However I will make it possible by downloading it within the app unzipping it and then flashing the device. But I'm fairly novice at c# and I don't have a lot of time to develop at this moment in time...
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
timmaaa said:
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
Click to expand...
Click to collapse
Thank you I'll finally get noticed for something XD
... It works great but the size is a big deal.
Also, i suggest that ... you show what version of recovery you will flash - TWRP ( is generic and the filename does not gives you clue, the same for the others )
Also, for the Stock firmware ( wich version is it ?! )
SuperSU is not updated ... you could improve and use the last stable from chainfire
all the other things looks great so far.
itechy said:
Hey guys iTechy21 here and I am glad to announce I have a toolkit I have made. This is my first toolkit and is currently still being developed (adding / tweaking features) to allow you to easily do basic adb stuff and more advanced things are coming when I have time to develop this :silly:
This will also be 100% open source when fully complete but is released under the GPLV3 licence (apart from the stuff I did not develop e.g. Custom Recoveries, root.zip, adb / fastboot and stock software all rights go to their respective owners).
Click to expand...
Click to collapse
Can we have more mirrors (faster ones)? Like MEGA? Google Drive is kind of slow :cyclops: Great work!:good:
ygor.almeida said:
... It works great but the size is a big deal.
Also, i suggest that ... you show what version of recovery you will flash - TWRP ( is generic and the filename does not gives you clue, the same for the others )
Also, for the Stock firmware ( wich version is it ?! )
SuperSU is not updated ... you could improve and use the last stable from chainfire
all the other things looks great so far.
Click to expand...
Click to collapse
Thanks for the feedback. I may improve that make to another form with information on the specific versions (along with a built in download tool). Along with updating the SuperSU.zip
The first thing I'll do is work on that once all the basic features are there. But generally its the latest version of TWRP that is stable along with the other recoveries...
As for the stock I think the one I included was 44s but it may be 5Q (ew). Ill be implementing a downloader for the stock images to download whatever the latest version is from cyanogen...
sabrefresco said:
Can we have more mirrors (faster ones)? Like MEGA? Google Drive is kind of slow :cyclops: Great work!:good:
Click to expand...
Click to collapse
I'll see what I can do but the size will be reduced in the next update as it will remove the stock zip and replace it with a downloader which will download the stock images and then flash them reducing the size massively... (but I use Gdrive as its easy to find the download link unlike with Dev-host...)
I can´t flash twrp with this toolikt any one have a clue?
Do you have the adb drivers installed? Or is it throwing an error?
Updated to fix issues, add ota support, install APK's and improve performance
Sent from my A0001 using Tapatalk
Is "fully complete" v1.0.0? I'd love to stretch my C# muscles a bit.
EDIT: I can't read. Sorry.
dont worry about it
we always have moments... Its almost ready but I don't have a lot of time to develop so it may take me a while to get everything in there....
Just improving the ota updater now as its throwing exceptions...
Download link is not working. Please re-up. Thanks
godzulu said:
Download link is not working. Please re-up. Thanks
Click to expand...
Click to collapse
+1
If anyone has this file, send it to me and I can host it on one of the servers I rent. If we use a Dropbox link, it's going to get so much traffic that the persons account will get suspended.
Lightheart 1.0 - Efficiency is key.
Hi everyone. My name is Skulldron and for those of you who do recognise me, know me as the creator of Project Pixel, another one of the greatest ways to emulate the Pixel Experience, whilst keeping all the benefits of using OneUI and its stock optimized drivers as its base. Today I'm going to be introducing something, different. Over the years of working on Touchwiz based ROMs, I've learnt the description of every little apk, every little permission, what it accepts and what it rejects, its pros and its cons. As a result of this experience, I have one of the best debloat lists out there, with each item on the debloat list, being tested, literally through trial and error for over 4 years, and it goes over every file and every partition known in the OneUI OS. This exact same debloat script was used in Project Pixel, which has recieved positive review after positive review for how efficient and how lightweight OneUI became after the debloat. Today however, I present to you Lightheart OS, a new project that I will be building myself and updating monthly (as I do own an actual Galaxy S10). Lightheart, is essentially built equal to Project Pixel, except that instead of Pixelifying and adding another gigabyte worth of apks, permissions and modules, just stops after the debloating and optimization bit. I have done something similar with the Galaxy Tab S2, and it was called Performante, but it was even more stripped on features than I would have liked myself, so today I showcase Lionheart, the Lineage OS to my Cyanogenmod.
Features:
1. Heavily Debloated System Size - The overall size of the system partition has dropped from 5.2 GB to 3.2 GB, along with RAM consumption dropping from 4.2 GB on stock, to 3.1 GB on Lightheart.
2. Heavily Debloated Product Partition - All bloat has been removed/deprecated from the Product Partition dropping its size from 592 MB to 78 MB
3. Better Battery Performance due to Efficiency - With the removal of an incredible amount of bloat, along with better performance and lesser services, you should be looking at better SOTs and better standby times.
4. Better Performance due to the Cruel Custom Kernel - The Cruel Kernel Team have been kind enough to give me permission and access to their kernel, which in itself has many optimizations, along with the allowance to achieve higher system speeds and overclockabilty via Mtweaks (Needs to be installed seperately, I will provide a link)
5. Preloaded Magisk with Cruel - Cruel Kernel comes preloaded with Magisk, all you have to do is install the Magisk Manager
6. October Patch with the promise of updates every month - As I use this rom as my own daily driver, i will update it every month to keep up with optimizations by Samsung and security patches.
7. Restored some stock Google Permissions - Some stock google framework was restored, such as the default setup wizard.
8. All Essential Samsung Features have been kept - All essential OneUI features have been kept alive, for the sole purpose of necessity.
9. Completely Deknoxed - It is covered under the debloat
Changelog:
1.0 - Initial Release
TWRP Install Instructions:
1. Download the latest available TWRP Image from Ianmcd's thread (the current supported version is 3.4.0.3 and will be linked at the bottom of the thread)
2. Download the custom VBmeta file and install 7Zip.
3. Rename the downloaded TWRP Image as recovery.img.
4. Highlight both the vbmeta.img and recovery.img, then right click while selected, 7Zip and then add to archive.
5. Once your in the 7zip interface, choose .tar and do not change any of the configurations and build the .tar file.
6. For this next bit, you'll need to download Odin 14.4 (links will be provided)
7. Open Odin, and then connect your device via USB.
8. Select AP, and then select the newly made recovery.tar.
9. Once it is loaded, press start, and when it reboots, hold the recovery combination (Power + Volume Up + Bixby) to boot into TWRP.
You have now successfully installed the latest TWRP for your S10 and can now proceed to actual install. Remember that if you are coming from stock you will need to flash the MultiDisabler, linked at the end of the thread.
Install Instructions (THIS ROM IS NOT FLASHABLE!):
1. Download Lightheart 1.0.
2. Open the zip and extract the folder.
3. Switch off your phone, and go into twrp via the button combination.
4. Make a backup of your cache (This will make the directory to TWRP's recovery system)
5. Boot back into the OS and head to where you stored Lightheart 1.0.
6. Cut the entire Lightheart Folder and move it to TWRP/BACKUPS/Random Number/
7. Now boot back into TWRP and wipe system, data, dalvik, cache.
8. Go to the restore option, and you should see Lightheart as a restorable ROM.
9. Restore Lightheart and once your done, boot into system
And thats about it for the install process. It is a bit unconventional, but I have been unable to procure or manufacture a working installer script as of this moment, so please bear with me for now.
Download Links:
1. TWRP Galaxy S10 Series:
https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
2. TWRP 3.4.-03 (Ianmcd):
https://androidfilehost.com/?fid=8889791610682934970
3. Custom vbmeta:
https://drive.google.com/file/d/1MBQ1iIei6a-RoURS6k6q_xwQOjG4jR-a/view?usp=sharing
4. Lightheart 1.0:
https://drive.google.com/file/d/1U3WcjUSZh3jWCjfoq8vLex83E8D1r8zA/view?usp=sharing
5. Odin 14.4:
https://odindownload.com/download/Odin3_v3.14.1.zip
6. Magisk Manager:
https://github.com/topjohnwu/Magisk/releases
7. MTweaks 17.3:
https://androidfilehost.com/?fid=8889791610682894841
Credits and kernel source:
1. @evdenis for their remarkable Cruel Kernel
2. Kernel Source: https://github.com/CruelKernel/samsung-exynos9820
XDA:DevDB Information
Lightheart 1.0, ROM for the Samsung Galaxy S10
Contributors
Skulldron
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: TWRP 3.4.0.3 Ianmcd
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-10-24
Created 2020-10-23
Last Updated 2020-10-31
Reserved
Reserved
Hi first thnx for your work but if this rom are make for S10 only why the tread is on cross device development ?
thanks for the rom is there the recording call
Random-Tester said:
Hi first thnx for your work but if this rom are make for S10 only why the tread is on cross device development ?
Click to expand...
Click to collapse
Hi. The plan is to slowly extend the ROM to the Galaxy s10+ and s10e, hence why the thread is in cross development
Skulldron said:
Hi. The plan is to slowly extend the ROM to the Galaxy s10+ and s10e, hence why the thread is in cross development
Click to expand...
Click to collapse
When you have done the above please feel free to report this thread and request it to be moved. For now it will be moved to the appropriate S10 only section.
Negan said:
When you have done the above please feel free to report this thread and request it to be moved. For now it will be moved to the appropriate S10 only section.
Click to expand...
Click to collapse
Noted. Thread has been updated with corrections and a link to a telegram group I have made, in case ya'll need further support. Thankyou ^_^
Skulldron said:
Noted. Thread has been updated with corrections and a link to a telegram group I have made, in case ya'll need further support. Thankyou ^_^
Click to expand...
Click to collapse
I encourage you to ensure to provide sufficient support on XDA. Please check the telegram sticky for more info. Also since this is essentially a TWRP backup I've edited your thread title to indicate this as this should be clear from the get go. Do not re-edit that again unless you're able to have the rom be flashable. Thank you and all the best of luck with your project.
Awesome !! Love it so far. Nice performance, genshin impact is not dropping frames like on other oneui ROMs.
Keep up the good work
Waiting for the s10e
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 08:49 PM ---------- Previous post was at 08:47 PM ----------
Waiting for the S10e
Sent from my [device_name] using XDA-Developers Legacy app
Hi,
I would like to use your rom if it means longer battery life. However I have no knowledge of rooting or flashing a galaxy S10 phone. I'm not afraid of the terminal but I'm afraid of loosing access to KBC mobile or Google Pay or any other app that is financially or government involved.
Is it because you say deknoxed that it will have problems with such apps or quite the opposite ?
Another question is, Can Jodin3 be used as well? I only have access to MacOS.
Forgive my English, it's not my mother language.
Kr,
Don't do anything with your phone then if you don't want to loose Google pay etc...
hi ,thx 4 ur hard work,sorry 4 a NOOB question: i have an s10 which is G973N, can i flash this rom?
HannibalHu said:
hi ,thx 4 ur hard work,sorry 4 a NOOB question: i have an s10 which is G973N, can i flash this rom?
Click to expand...
Click to collapse
As long as its not G973U, it should work but I advise caution when flashing a ROM which is not the same model
So far this Rom ist great, the lack of the samsung account makes setting up some apps a bit difficult, but other than that this is awesome!
How are temperatures on this debloated rom?
Pro
Skulldron said:
Hi. The plan is to slowly extend the ROM to the Galaxy s10+ and s10e, hence why the thread is in cross development
Click to expand...
Click to collapse
does it mean it would work for s10e or we need to wait a while?
Hi, this rom works with the latest bootloader?
HELLo everyone...
After several weeks, months and before Android 12 released, i decided to share this ROM to this A51 community. Hopefully you guys enjoy it and don't offend me if the ROM is bad, so....let's get it ON.
Things to do before flashing:
1. Make sure you're on binary 5 (this ROM tested and using binary 5 vendor, so to avoid any broken or whatever error flash your device with latest firmware).
2. Backup your IMEI (highly recommended).
Flashing:
1. Clean flash is recommended. Flash kernel, flash J4F vendor and system.img, flash multy disabler (if necessary) then full wipe and also you can perform "typing YES" format. Reboot to recovery again, then flash as usual you guys always do (Magisk etc.).
ROM Features from S20 and Note 20 line up:
1. Samsung Dex (not full features coz need fix at kernel level).
2. Flagship live blur
3. Flagship edge lighting style
4. AirCommand (S pen)
5. LiveDrawing
6. Multy screen resolutions (HD+ - FHD+ - WQHD+)
7. 1000++ system fonts
8. Flagship sound quality and effects
9. Camera features unlocked (pro video etc.)
10. All original A51 features
11. Common tweaks here and there and so many possibility to unlock another S20 features
Bugs:
Minor glitch in pro mode video, and not really remember and deep testing everything, but hopefully still acceptable (hopefully ) but yeah..nothing's perfect, if you found one let's discuss together in A51 telegram group: https://t.me/samsunga51
Hall of Fame:
@MrWaehere for his awesome CRB kitchen
@VDavid003 and his rom TreeUI for my inspiration and countless help
@Yillié and his OFox recovery and also countless help and advise and ideas
@BlassGO and his Dynamic Installer, patches, advise and countless contributions (thanks for making AirCommand even greater lol)
@manudinath and his projects.
@Winb33 for fonts mod
@topjohnwu for Magisk
@ianmacd for multy disabler and TWRP
Stock Kernel Source
PM me if i forgot to mention someone.
Advise and Tips:
- It's normal during first boot if lags occurs, give the ROM some times to settle, finish your setup, update your apps and you good to go..
- It's better to avoid update in Galaxy store related to system app, such as MDE Service Framework, Samsung Core Services etc. It might causing conflict due to mixed up firmware. But anyway it's up to you.
- Please do not complain regarding app missing (getting debloated) and related to debloat. Because it's very hard to acomodate every person's taste. Bloatware is very Objective and absurd for each person and I know it's supposed to be using Aroma installer or any script but i don't have time that much to do that.
Download link:
**when you click this link and downloading, that's mean you're agree to all the consequences and i'm not responsible to anything - do with your own risk**
LINK
Pero peeps. Sorry for not being able to test all the stuff properly xD.
Yillié said:
Pero peeps. Sorry for not being able to test all the stuff properly xD.
Click to expand...
Click to collapse
nah, you have doing so great/ thank you s much for everything.
Testing .
perro
Ole its already, nice
Quick question, what am i supposed to select while flashing J4F.img in TWRP, boot, recovery, optics img, prism img or super.
@jagpanzer Please check your PM inbox. Thank you.
-Regards: Badger50
BlassGO said:
Ole its already, nice
Click to expand...
Click to collapse
Ia possible wirh This vendor run fingerprint perfectly in havoc
Badger50 said:
@jagpanzer Please check your PM inbox. Thank you.
-Regards: Badger50
Click to expand...
Click to collapse
If run for You send details my friend
Someone knows how to pass CTSprofile in magisk with this rom?
gobblefunk said:
Quick question, what am i supposed to select while flashing J4F.img in TWRP, boot, recovery, optics img, prism img or super.
Click to expand...
Click to collapse
system and vendor.
BlassGO said:
Ole its already, nice
Click to expand...
Click to collapse
mhm...thanks for everything
jagpanzer said:
system and vendor.
Click to expand...
Click to collapse
Kernel 11 support this ROM?
Magisk 23.1
Download Magisk 706a4922 alpha apk
Download File Magisk 706a4922 alpha apk
apkadmin.com
Changelog magisk 23.1
DOWNLOAD VERSion ALPHA:
Magisk v23.1 (706a4922-alpha)
Changelog:
• Switch to zygisk to execute the deny list,
• Magiskhide has been completely removed
• Denylist Added
• Restart to take effect after changing the switch state of zygisk
• Major changes, some problems may occur, temporarily not pushed to the update channel
Others changes in APK:
[General] supports pure 64-bit devices
-[General] Support Android 12 emulator
-[Zygisk] code injection framework
-[General] Remove MagiskHide
-[General] Support simulator loading module
-[MagiskBoot] supports zImage format
-[MagiskBoot] Add zopfli encoder
-[MagiskInit] supports boot configuration
-[App] Repair installation function will now check whether the script under /data/adb/magisk/ is not updated
-[MagiskInit] supports some Meizu devices
-[MagiskSU] If supported by the kernel, use isolated devpts
-[MagiskSU] Fix pts configuration code, no additional sepolicy rules are now required
-[MagiskBoot] supports v4 boot image header format
-[MagiskInit] Support some OnePlus and Opal devices Oplus.fstab
-[App] The update module needs to be restarted, mark deletion is not allowed
-[App] Delete online warehouse
-[App] Add mount information to the saved log file
-[App] Adapt to Android 12 API level
-[App] Display running waiting pop-up window when hiding/resuming the application
-[Stub] Open source obfuscation function
-[Script] View and display the sepolicy rule folder of the module
-【App】Hide the screen overlay when you need to pop up the window. Android 12+
-[App] Delete the floating bottom bar and change it to a general bottom operation bar
-[General] Support compilation cache
-[General] Added rejection list function
-[App] Delete DoH
-[App] Delete SafetyNet
Can you please also make this rom for M30s ??
Because both have similar specs and same soc !
Bluetooth connect error
hacker812c said:
Kernel 11 support this ROM?
Click to expand...
Click to collapse
during testing i only test with BF2. you can try
Arya1999 said:
Can you please also make this rom for M30s ??
Because both have similar specs and same soc !
Click to expand...
Click to collapse
sorry, no time.
Inomjon6940🇺🇿 said:
Bluetooth connect error
Click to expand...
Click to collapse
last time i try with old BT 4.0 earphone was fine and also BT call. will test again, on last build i've made changes and could be broke something
F926B I Dr.Ketan ROM
ROM Features
ROM Features varies with version of ROM. For more details, read changelog post. Link available in post #3 for changelog of all versions.
Must read changelog for a version you are going to install, it will have latest information about features, changes, known bug list/fix and Installation guide of respective version.
Credit and Thanks :
@Chainfire - Respected elite developer for supersu and his unbelievable contribution to XDA/Android community. @wanam - Respected elite developer for his awesome contribution and references to his works.
@topjohnwu for Magisk
@xperiacle the amazing developer for reference to his work and tools. @amarullz for aroma installer. @gharrington for 3minit battery and QuickLaunch.
ROM Control source and all credit and thanks goes to @daxgirl and @Wuby986 for their open source project for RomControl.
@AbrahamGC for some ideas samsungvn htcmania & 4PDA for tips and some stock apks.
AbrahamGC and Anan1211 for Secure folder and s-health A12 ianmacd for TWRP @Arteush for bluetooth fix (losing BT pair on reboot) on Android Q, aka_vkl for Dolby digital, kdrag0n for SafetyNet fix @Winb33 for custom font pack. HuskyDG for Bootloop Protector magisk module.
XDA devDB InformationS908 I Dr.Ketan ROM , ROM for the Samsung Galaxy S22 Ultra
Contributors
Dr.Ketan
ROM OS Version: Android 12
ROM Kernel: Stock (pre-rooted). Source code (samsung) here
ROM Firmware Required: Stock Samsung specified version
Version Information
Status: Stable
Created 2022-04-10
Installation and Download & Notes
Important :
- This will void warranty.
- As of now you will lose Samsung Pay and Samsung Pass forever if you root once, even unrooting won't help. (hope in future we can get it working on tripped knox device)
- OTA won't work once you root device.
- ROM Tool permission : Files & media - To save and read files, Calendar - Tool needs some time monitoring to avoid using RT immediately after reboot. Special access for accessibility service - Since Android 12 it requires for QS panel custom Toggl e.g. Reboot to recovery
Installation :
Read ChangeLog post for Installation instructions (link on post #3)
Download : https://drketanrom.com/
ChangeLog
OneUI 4.1
- S01 - 10.04.2022
Rsrvd 4
ChangeLog S01
Based on F926BXXU1CVC5 Android12 March 2022 security patch OneUI 4.1
ROM Tool on essential fix auto setup zygisk including SafetyNet fix (no needs to change any option manually
Prerequisite :
Must have installed firmware F926BXXU1CVC5 (Reported working on F926BXXS1CVCA April scurity patch too)
Rooted device with Magisk (Zygisk) Intallled (Follow steps below in case you have non rooted device)
We recommend to make EFS (IMEI) backup as soon you root device and keep copy to safer place (outside device)
Warning!
We strongly recommend to make backup data before installing ROM Module, non matching verion or other factors may cause bootloop and you may needed to Factory Reset in certain circumstances. Also ROM Installer may prevent it by installing bootloop protector module but no guarantee!
Spoiler: Brief instructions about how to root
[*](Root F926B)
Unlock bootloader
You needs to download stock firmware (You can get stock firmware with Frija) and extract AP*.tar.md5 file and patch with magisk. Flash patched file with AP tab of Odin
Reboot to recovery and select to format data (Factory reset option on stock recovery)
Reboot device → You will see Magisk stub in drawer → Update it. (In case stub not there, Donload magisk app from Download area and intall manually) → Open Magisk - It will ask to complete additionl setup, Let it do. → Reboot device. You are now ready to Intall Dr.Ketan ROM module. Move to next step.
[*]PS : For detailed instructions about Magisk installation (root) read here. In case still you have question, move to Question forum of S22 section and ask for help. This thread is development thread and any questions related to how to root will be ignored.
How to Install Dr.Ketn ROM Module (New!)
Download app ROM Installar XDA F3 S*.apk and and Install as regular apk (* = ROM verion)
Uninstall any other magisk module you have installed
Open ROM Installaer app → Grant SU permission → Just seat and relax. It will auto download ROM and Install automatically. You can see process on screen. → Reboot device when asked.
Benefits of ROM Instller : This method have some extra benefits over regular installation like
It won't process if no root access found
It will block installation on wrong devices
It will abort Installation process if MD5 doesn't match (Corrupt download).
Also it will show current firmware version and available firmware version (You should not install if there is much difference in firmware base) Read prerequisite above for recommended firware)
Single click installation
It prevents bootloop with magisk module installation on incompatible formware version by injection bootloop protection module.
Setting up device first time after Module installation
Open ROM Tool from app drawer and Apply essential fix and Reboot,
After reboot you can check SafetyNet and should be passed. You can use this app from playstore or This from Github to check SafetyNet (ROM Tool will offer to install this during Essential fix too)
Now you can further setup ROM a per your liking. Also MagikHide is Configure Denylist now and available under Magisk Settings.
Since A12 new Magisk (Zygisk) doesn't have buil-in Module repo, You can get standalone module manager from here (ROM Tool will offer to install this during Essential fix too) For more details and queries about new magisk ref this
PS : Plz don't install any other mods for SafetyNet, All queries related to Magisk/SafetyNet will be ignored if already explained above
ROM Features (XDA Version)
- Ad Free QS Panel Toggle
- Reboot to recovery QS Panel Toggle
- Native call recorder (Manual) While you are on call - click 3 dot - Record (Should work without CSC restriction)
- Auto Call recorder without CSC restriction (ROM Tool - Mods & Fix)
- High Volume warning disabled
- Pre fixed Titanium freezing while restoring apps
- Probable fix for Titanium Backup schedule
- Internet browser Secret mode
- S Health patch for using with rooted device.
- ROM Tool with following Options
AdFree mode Enable/Disable
Single click install/uninstall custom fonts (on the fly)
YouTube Vanced Installer (No xposed requires)
NonRoot - Requires MicroG to login
Root - Truely alternate to Youtube, Can login to youtube without MicroG (disable Play store update)
You have to click on NonRoot/Root depending on your choice, then you needs to click "Install" tab and latest version of Youtube vanced will get installed.
StatusBar Icons
Show/Hide stock battery
Show/Hide 3minit battery
show/hide stock clock
show/hide 3minit clock
ROM Control - See below
Mods & Fix
Auto Call Record
Titanium backup FC fix
Google Pay Fix
Added camera fix (Certain users reported camera failed issue. This is reported on stock too, here is someworkaroung meanwhile samsung fix it)
SafetyNet Fix
Samsung Health & Private share fix
Update & Fix
[*]- ROM Control (systemUI preferences)
Battery Bar with thickness and color option
Virtual key on statusbar (Lt/Cinter/Rt)
Network meter with Toggle (Lt/Rt/Quick Panel/None) with color option
[*]PS : There may be few more options in ROM control but won't work if those are not mentioned here.
Known Bug/Tips/Fix
3 minit users can use 3minit battery paid version for free. Check this (Thanks to gharrington )
Tips on TWRP and App Backup/Restore Read Here
Boot splash warning removal. At presently available for Exynos (S908B) only, get it from ROM download area. Instructios packed inside.
[*]
Download : DrKetanROM.com
PS : This is a fully customized ROM and for end users only, ROM or any part of ROM not allowed to redistribute,modify or to use as base to prepare new ROM.
STATUS : Online
First !!!
Totally recommended with lots of features !
Dear friends
I have consider to make this ROM as there is no active development on Fold3 and everyone should thank to @pvillasuso for pushing me lol! ROM made within couple of hrs and that without having device so may some bugs expcted, but according testers, stable enough for release.
Also thanks to all testers who have tested and reported. I may not be able to release ROM with every new firmware but will try my best when time permits.
Again thank you all for showing love & trust for Dr.Ketan ROM
Hi,
Perfect Rom!!! thank you Dr.Ketan to provide us with this rom
works like a charm! great work doc!
Installed your ROM, and finally my Fold3 is happy Thank you Dr.Ketan for your excellent work!
Sinus1 said:
Installed your ROM, and finally my Fold3 is happy Thank you Dr.Ketan for your excellent work!
Click to expand...
Click to collapse
will we ever see this rom for the usa version ther sm-f926u??
Important :
ROM S01 reported working on base F926BXXS1CVCA April scurity patch too, so you can first update to new base - Root - Install ROM (follow installation guid above)
.
junevtec said:
will we ever see this rom for the usa version ther sm-f926u??
Click to expand...
Click to collapse
Not possible , this is just for the F926B variant only .
AFAIK for several reasons, such as rooting and unlocking bootloader not available for for sm-f926u
It says installed, but there is no ROM Tool app
klemen241 said:
It says installed, but there is no ROM Tool app
Click to expand...
Click to collapse
Show me magisk module page screenshot
dr.ketan said:
Show me magisk module page screenshot
Click to expand...
Click to collapse
can be a problem that i am on march security update?
klemen241 said:
can be a problem that i am on march security update?
Click to expand...
Click to collapse
If you are on non supported firmware then module itself have turnd off (Check module page) to prevent bootloop. Read installation guide and changelog post and follow it to the letter.
dr.ketan said:
If you are on non supported firmware then module itself have turnd off (Check module page) to prevent bootloop. Read installation guide and changelog post and follow it to the letter.
Click to expand...
Click to collapse
That must be it. I will update official firmware and try again. thanks
ps: rom works great. For now no problems. Only in the battery bar addon, has ON and OFF switched haha.
Thanks for the ROM.
Is Samsung Health and Galaxy Watch pairing working properly?
mcn1970 said:
Thanks for the ROM.
Is Samsung Health and Galaxy Watch pairing working properly?
Click to expand...
Click to collapse
Yes , both working properly