Related
Hi guys, I am not new to android, I daily flash my Samsung Nexus via CWM all the time.
However, My dad recently went to india and i believe got his phone unlocked their for Indian sim cards to work.
Now if they flashed a indian rom on the phone as well, How do i flash the native BELL rom? also, How do i unlock this?
I read around one has to download multiloader and find the Bell Flash file, or whatever the stock one is that Bell gives out in Canada.
Can anyone help me with this? I'm new to this area of XDA. Basically I need a Bell stock flash file, and need to network lock his sim card back to Bell again.
Cheers
Ok So from reading around it seems like I should do the following:
-Download Multiloader--- Done
- Download Bell Software from SAMFIRMARE, Im downloading the Firmwares for GT-S8500M - Canada (Bell)? is that right one?
- Follow http://forum.xda-developers.com/showthread.php?t=1759424 guide to flash my firmware,
and then I should have my dads phone back and on the Bell network right in Canada?
Please give more details so that it is easier to understand you and offer solution.
If I guess right, your dad's phone is Samsung WAVE 8500? And that the phone is completely unlocked now?
If the answer is affirmative, then there is no need to lock it back again to Bell Network. An unlocked phone can be used with any SIM card.
And as the phone was originally of BELL network, just go to Sammobile and download the Canadian firmware for S8500 (WAVE).
Flash your phone with the downloaded firmware and start using it. You don't have to LOCK for it to work with BELL.
The above is only if your dad's phone is WAVE and originally of BELL network. If not, please give more details.
Hey thanks spacks. It was originally from Bell. So if it was flashed to some firmware for india, I will just flash it back to the Bell firmware.
Right now its locked to his India cell phone carrier, So i should probably flash the bell rom to put him back on his original network.
If i run into problems I will post back here, as I am leaving for work now
Edit** If the phone is just locked to the indian carrier, How can i UNLOCK it without flashing a new firmware??
Please read this thread : http://forum.xda-developers.com/showthread.php?t=1473089
Best Regards
Ok i tried the first step to flash the boot files BUT now running into a issue, the laptop wont detect the samsung phone anymore, I tried reinstalling and updating drivers and uninstalling them, Can anyone help me? The phone boots up to the "Samsung Wave I8500M" logo screen but freezes...I really need to flash this Bell firmware asap.
Ooooops
This is not going well as expected :S
Go to SamMobile and download the canadian fw available there and flash it
Then try again with the flock to unlock your phone
Best Regards
Edit : here is the file you are seeking : http://hotfile.com/dl/153842100/e332000/S8500MUGJF5_S8500MBMCJF5_BMC.zip.html
mylove90 said:
Ooooops
This is not going well as expected :S
Go to SamMobile and download the canadian fw available there and flash it
Then try again with the flock to unlock your phone
Best Regards
Edit : here is the file you are seeking : http://hotfile.com/dl/153842100/e332000/S8500MUGJF5_S8500MBMCJF5_BMC.zip.html
Click to expand...
Click to collapse
Hey it's okay! I fixed it the driver was somehow corrupt, so I downloaded Samsung kies, everything is fixed. Flashed the Canadian firmware last night.
However, is there any way to get BADA 2.0 on the Canadian wave?? Any flash files? I can't find anything.....I hate when they delay updates!
Sent from my Nexus S
I've got a D855 which is currently running V10n-HKG-XX. I'm in the UK but bought the phone off of eBay so I guess it came from China. My question is; can I change my phone to think it's an EU phone? Say I flashed a stock firmware such as one of these would I then receive OTA updates as if I was an EU phone? Would this cause issues? If I did a full reset of my phone, would it go back to the HKG firmware?
I'm considering rooting and flashing a custom ROM. Does having the D855 HKG instead of the EU version make any difference to this process?
Thanks for any and all help with this!
Hello all, I factory unlocked an ATT Galaxy S9 and then successfully flashed to Unlocked firmware via ODIN. Recently acquired an S9+ and want to give the S9 to my mother. How do I go about restoring everything back to default, and back to default ATT firmware?
Thank you in advance! I'm hoping to do it this week so she can have the phone! Blessings! :good:
Same way you flashed the U1 firmware, Odin 3.13.1 and the stock ATT firmware
Did you ever figure this out? I used Odin to flash the U1 firmware so I could try the beta. Overall it worked pretty good, with the only exception being signal strength. I know I can flash U1 firmware, but I'm trying to get back to the original U firmware.
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
No, bootloaders are different, with the S7 there was an unbranded U firmware that was compatible with most of them, unlocked firmware will be that one for the S9, but no you cannot just flash different device firmwares to the wrong model
I was able to flash the ATT rom onto my Verizon S9. I got a VZ s9 from work but I'm on ATT. For the most part it's worked great, I had done the same thing previously with a Galaxy S7. I say for the most part b/c I am on here tonight to post a question myself about the fact that I'm getting a delay with MMS messages. I imagine it has something to do with the APNs I have setup, but I can't seem to figure it out.
toronado13 said:
I was able to flash the ATT rom onto my Verizon S9. I got a VZ s9 from work but I'm on ATT. For the most part it's worked great, I had done the same thing previously with a Galaxy S7. I say for the most part b/c I am on here tonight to post a question myself about the fact that I'm getting a delay with MMS messages. I imagine it has something to do with the APNs I have setup, but I can't seem to figure it out.
Click to expand...
Click to collapse
Did you have to flash to the U1 software first?
I do think that is what I ended up doing... tried to go directly first and it kept failing. Got fed up and decided to just try and put the bone stock rom on it, and that went on really easily.... so after using it like that a few days I tried to drop the ATT rom on it and it worked without issue.
SEALBoy said:
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
Click to expand...
Click to collapse
Yes, but you need to go to the u1 firmware 1st then to the other carrier firmware. Also make sure you avoid the newer firmwares with the new bootloader, as the unlocked model and certain carrier models don't have the new bootloader.
*Detection* said:
No, bootloaders are different, with the S7 there was an unbranded U firmware that was compatible with most of them, unlocked firmware will be that one for the S9, but no you cannot just flash different device firmwares to the wrong model
Click to expand...
Click to collapse
lolol
yes u can.. u can flash between U and U1 firmwares no problem..
normally ud b correct tho but since s8/s8+ it has been ok.. just cant flash 9600 or 9650 to a U or U1 device
elliwigy said:
lolol
yes u can.. u can flash between U and U1 firmwares no problem..
normally ud b correct tho but since s8/s8+ it has been ok.. just cant flash 9600 or 9650 to a U or U1 device
Click to expand...
Click to collapse
That'll be why I still thought that then, coming straight from the S7 > S9
Had many members flashing the wrong firmwares thinking they could do that and bricking their S7s / wondering why ODIN failed
*Detection* said:
That'll be why I still thought that then, coming straight from the S7 > S9
Had many members flashing the wrong firmwares thinking they could do that and bricking their S7s / wondering why ODIN failed
Click to expand...
Click to collapse
I tried downloading vzw firmware G960USQS3ARI6 to my unlocked sprint s9 and still not vzw flashed. want to do this so can have voice over LTE. Any other steps im missing? flash went through but still sprint
As soon as Firmware ver. 3 came out for the G960U1, I was able to flash it to my Sprint G960U and finally have VoLTE, WiFi calling and stable LTE for MetroPCS. Used samkey to unlock it from Sprint. My phone is actually performing much faster without all of Sprint's bloatware hogging my RAM and storage space. I can confirm that OTA updates still work the same...I received September's security patch (current) with no problems. Device is still official status and Knox hasn't been tripped.
A lot of people think you can just flash the carrier firmware of your choice and boom, it works...I had the same thought process....that's not the case. You have to make sure that there is a matching firmware version for the carrier you want to flash to, as well as make sure the G960U1 firmware version (the unlocked version of the S9's software you have to flash first before even carrier flashing) is the same version of what is installed on your phone now. It's easy ya'll......just READ lol.
I'm in love with my phone again thanks to XDA. ?
HAPPY FLASHING!
nickosarus2008 said:
As soon as Firmware ver. 3 came out for the G960U1, I was able to flash it to my Sprint G960U and finally have VoLTE, WiFi calling and stable LTE for MetroPCS. Used samkey to unlock it from Sprint. My phone is actually performing much faster without all of Sprint's bloatware hogging my RAM and storage space. I can confirm that OTA updates still work the same...I received September's security patch (current) with no problems. Device is still official status and Knox hasn't been tripped.
A lot of people think you can just flash the carrier firmware of your choice and boom, it works...I had the same thought process....that's not the case. You have to make sure that there is a matching firmware version for the carrier you want to flash to, as well as make sure the G960U1 firmware version (the unlocked version of the S9's software you have to flash first before even carrier flashing) is the same version of what is installed on your phone now. It's easy ya'll......just READ lol.
I'm in love with my phone again thanks to XDA.
HAPPY FLASHING!
Click to expand...
Click to collapse
Hi, I got one unlocked G960U1(G960U1UES3ARI1) and downloaded new fireware(G960U1UES3ARI1-SPR) from sammobile, but after flashed SPR ROM successfully, the info on the phone still shows XAA, anything I missed here? Thanks!
Curtis2018 said:
Hi, I got one unlocked G960U1(G960U1UES3ARI1) and downloaded new fireware(G960U1UES3ARI1-SPR) from sammobile, but after flashed SPR ROM successfully, the info on the phone still shows XAA, anything I missed here? Thanks!
Click to expand...
Click to collapse
Well first off, you have the unlocked phone. I don't. My G960U is originally from Sprint, so I'm not sure about carrier flashing regarding the G960U1. I thought it was supposed to provision itself after you put the sim in, and the associated carrier apps will download since it's the unlocked model...but I may be wrong...
SEALBoy said:
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
Click to expand...
Click to collapse
I know so many people have already answered your question from some saying No to others saying Yes but you need to Install U1 first and Bla Bla Bla.
I want to give you one specific answer: With S9 you can any Carriers firmware you wish or even Unlocked phone's firmware. You will never have any issue. And you don't ever need to flash U1 or something else before changing carrier firmware you can Flash from ATT S9 firmware to VZW S9 firmware without any issue. You can also flash from U to U1 which is from Carrier specific to Unbranded/Unlocked but only hiccup is original Odin will give you SHA-256 error, which is normal because you are flashing U1 firm to U device or vice versa. This error can easily be resolved by used Patched odin that disabled SHA-256 check. And trust me you will never have any issue.
You will never want to do this but I have gone as far as mix-matching U and U1 firmware together as well. Like flashing AP, BL and CP of U device but flashing CSC of U1 device. and it still works.
hey there, a little late to the party, having trouble with going from a Verizon to a Sprint, even by way of U1. I can't get any of them to work. And I've been told I have to go from VZW to U1 before I went to Sprint. Is that not the case? I'm having a hell of a time getting anything to flash, everything fails.
---------- Post added at 03:08 AM ---------- Previous post was at 02:57 AM ----------
ret4425 said:
hey there, a little late to the party, having trouble with going from a Verizon to a Sprint, even by way of U1. I can't get any of them to work. And I've been told I have to go from VZW to U1 before I went to Sprint. Is that not the case? I'm having a hell of a time getting anything to flash, everything fails.
Click to expand...
Click to collapse
well, I tried to load the Sprint image from the VZW, no dice. It said it passed, but upon reboot loaded up the old Big Red (even with the Sprint SIM in it).
Anyone have any ideas? This is driving me insane....
Hi first post, please be gentle
I've got an s9 which is on EE UK, I flashed the phone with stock firmware, I did run into a couple of issues where when flashing the phone it got stuck on odm.img so I had to start again but using CSC and not home CSC so I lost everything
When the phone rebooted, it started up in German, so as I had my sim card in, it restarted in English
I'm using the following
G960FXXU2CSA2/G960FOXM2CSA2/G960FXXS2BRK3
Service provider SW SAOMC_SM-G960F_OXM_DBT_PP_0009
DBT/XEU/EVR
When I check for updates I get the following
Your current software version isn't supported. Visit a service centre
Can anyone help on how to put this right, I want to stay on stock firmware, not EE firmware
Thanks in advance
Good morning, I have a problem with my S9 model G9600 which came from the factory with the firmware of Hong Kong, however I tried to change the firmware for the one in Colombia because some voice services of the operators only work with the software of the country. But when trying to flash the part of CSC I mark the error and obviously the installation fails as in a kind of A brick because the logo of Galaxy S9 does not pass and is only solved by reinstalling the firmware with which it came from the factory; I have already made sure that the binary is the same, however I can not find a solution. I attach photos of the error.
dancevision said:
Hi first post, please be gentle
I've got an s9 which is on EE UK, I flashed the phone with stock firmware, I did run into a couple of issues where when flashing the phone it got stuck on odm.img so I had to start again but using CSC and not home CSC so I lost everything
When the phone rebooted, it started up in German, so as I had my sim card in, it restarted in English
I'm using the following
G960FXXU2CSA2/G960FOXM2CSA2/G960FXXS2BRK3
Service provider SW SAOMC_SM-G960F_OXM_DBT_PP_0009
DBT/XEU/EVR
When I check for updates I get the following
Your current software version isn't supported. Visit a service centre
Can anyone help on how to put this right, I want to stay on stock firmware, not EE firmware
Thanks in advance
Click to expand...
Click to collapse
You need to flash the XEU firmware, you have the German DBT firmware running right now
same issue, i have a hungarian telenor phone which suppoesed to be (PAN) , i flashed XEH which is hungarian, but it said software version not supported visit a support center , so i flashed the PAN 9.0 version and it still says this
Did you find any solution for this?
Bizzhub said:
Did you find any solution for this?
Click to expand...
Click to collapse
are you having an identical issue? i ask that because resolutions are very specific. Flashing firmware from www.sammobile.com/firmwares is very commonly the fix for a great many issues, but id hate to have you go thru the trouble of doing so if its not necessary
I tried flashing using odin but didnt work. btw, im using SM-965U and currently residing in Thailand. I dont know if this is the reason why I cant update at all.
S9 message
I am in the U.S. and am getting the message that software isn't supported also. Is there any resolution to this problem?
In case it helps, I was having this same issue with my unlocked Galaxy Note 10+. I found this thread after searching. I had gotten into this situation by flashing CP/AP/BL from TMO firmware without also flashing TMO's CSC or USERDATA. I avoided CSC/USERDATA (I was using the home CSC) because I wanted to avoid wiping the phone.
When I finally gave up and flashed CSC and USERDATA, everything was back to normal.
hueboy said:
I am in the U.S. and am getting the message that software isn't supported also. Is there any resolution to this problem?
Click to expand...
Click to collapse
have you tried flashing the stock firmware via Odin?
ThugEsquire said:
In case it helps, I was having this same issue with my unlocked Galaxy Note 10+. I found this thread after searching. I had gotten into this situation by flashing CP/AP/BL from TMO firmware without also flashing TMO's CSC or USERDATA. I avoided CSC/USERDATA (I was using the home CSC) because I wanted to avoid wiping the phone.
When I finally gave up and flashed CSC and USERDATA, everything was back to normal.
Click to expand...
Click to collapse
thats usually the fix. Glad you got it working
Bizzhub said:
I tried flashing using odin but didnt work. btw, im using SM-965U and currently residing in Thailand. I dont know if this is the reason why I cant update at all.
Click to expand...
Click to collapse
what is the issue after you flash in Odin?