I activated VoLTE with the operator and on the cell phone I dialed *#*#86583#*#*. And the message "VoLTE Carrier check was disabled" is displayed, now I have 4G and VoLTE activated, but I notice that incoming calls are no longer identified.
Anyone have an idea what it could be?
Or someone with the same error?
Additional information:
Xiaomi 11 Lite 5G NE
Country Brazil
Operator: Claro - SP 11
Make sure you have the phone app updated, and make sure the device is gully updated.
Related
Did this on my AT&T sim.
In dialing app,
VoLTE *#*#86583#*#*
VoWIFI *#*#869434#*#*
Network Settings, Enhanced 4G LTE Mode, enable it.
This USSD code just disables/enables VoLTE capability check. It may help if your carrier "does not support" VoLTE for Mi A3 while the device is capable. But you need to be careful. Mi A3 (at least International ROM) uses some generic carrier profile. And this profile uses SMS over IMS. And you will need an IMS APN for sending SMS.
If your carrier does not support SMS over IMS (still uses LTE signalling for sending SMS) you can try setting active another carrier profile with QPST Flash Tool if your device rooted.
qwertysmerty said:
This USSD code just disables/enables VoLTE capability check. It may help if your carrier "does not support" VoLTE for Mi A3 while the device is capable. But you need to be careful. Mi A3 (at least International ROM) uses some generic carrier profile. And this profile uses SMS over IMS. And you will need an IMS APN for sending SMS.
If your carrier does not support SMS over IMS (still uses LTE signalling for sending SMS) you can try setting active another carrier profile with QPST Flash Tool if your device rooted.
Click to expand...
Click to collapse
I was thinking (for USA users) this would be good to enable when AT&T, T-Mobile, Sprint and Verizon enable RCS next year.
My MVNO on AT&T doesn't support VoLTE/VoWiFi. My IMS Status: registered and UT Interface is available.
Am I barking up the wrong tree?
i tried this on my MiA3 with Havoc OS and PE, not work. On Mi9 and MI9 Lite work
Hi folks,
I recently bought an Active Watch 2 and already have a Vodafone UK mobile account to which I added the One Number service.
I've discovered that on my watch while on 4G, I cannot make or receive phone calls.
There is definitely a data connection there, as I can send a text message or use the Internet browser app to view a website.
What happens is I dial a number, I get 2 beeps and then a Call Ended message. I've spent over 10 hours on the phone/chat to Vodafone trying to get this resolved to no avail. I've done a number of resets, SIM swaps etc.
This morning I noticed on the watch under Settings in the Phone app, that there is an option for "Preferred Number for Calls" which is greyed out and set to 'Watch'. I'm sure at one point when I first got the watch I was able to select Phone or Watch. Could this have something to do with it? Is the VF network blocking the call because the watch is trying to phone from the One Number secondary number instead of my contract phone number ?
Any help appreciated!
Hey there.
I have the exact same problem myself, my carrier is o2 and have an Active2 LTE.
Set everything up through the esim QR Code. I am the £5 data per month, and yet am unable to make or receive phone calls through LTE / Wi-Fi. No issues though with data and messaging.
It occasionally worked when I first set it up a couple of months ago, but since the latest Tizen update to 5.0 something, there is no option under 'remote connection' in the Galaxy Wearable app to make/receive calls. When testing my original Galaxy Watch out, the call option is there and it is on Tizen 4.0 and I am able to make WiFi calls.
At first I thought the issue was with o2 but am now thinking it is related to Samsung services. Via Bluetooth the Active2 works fine with call functionality but through WiFi/lte, nothing. The odd issue as well, is that, when testing through LTE on the watch it remotely connects very briefly to the phone when attempting the call but then the phone automatically disconnects from remote dialling.
I would say that it is definitely software related, I also have tried all troubleshooting issues and more with no luck.
Hey there. Have you managed to get a fix for this?
I have been in contact with both o2 and Samaunf on this very issue and Samsung are saying to send it in for repairs. I am very dubious though that it is a hardware issue, rather software related.
Hi I have now got both a galaxy watch and a galaxy watch3 here in the UK to now work stand alone on a pay as you go ESIM and wondered if some of my findings may help.....
First the Galaxy Watch i bought second hand on an auction site
it had been on EE in the UK and when i first loaded an esim on it I could not make calls or connect to the network...
I looked under settings connections mobile networks only to find that there was no option to select 3g / 3g4g mode ....
Hence the unit was setup only to connect via 4g data ....by default ....and so would only send Voice calls over LTE ...and hence when i changed the ESIM from EE yo Vodafone I could not make calls or SMS ...and only had emergency calls over vodafone if i was in a 4g service area with no ability to search for or connect to 3g
So I downloaded OXX versions of the firmware instead of OXA for the UK ...and i got the earliest version i could find.
Then loaded it onto the watch ... then I checked the CSC and EE where using a non BTU CSC code so first...
I changed the CSC to BTU so I could support non EE ESIMs
Next I Uploaded an ESIM from Vodafone via Galaxy Wear on a samsung phone over a bluetooth link after first activating
the esim test feature of wear app to enable QT code scanning to load the ESIM.
The OXX firmware activated the 3g 3g-4g section option under settings connections mobile networks so i could enable 4g/3g auto selection .....then the watch could find and connect to 3g or 4g networks and make voice calls and send / recieve sms.
then I put the watch into firmware download mode to install OXA firmware ...and it was an the oldest version i could find
the watch rebooted and so i now had OXA firmware with the 3g-3g/4g toggle still present under settings.
checked it was on 3g-4g auto selection.
then I enabled Dexv mode and made sure the CSC was still on BTU for generic UK ....it wasnt it had changed so I reset it to BTU
then I upgraded the firmware to the latest version via wear app ...
So end up with a generic BTU UK CSC with the latest Firmware BUT with the 3g/4g selection option under mobile networks.
with another service providers ESIM installed 3g/4g to auto select and it all works fine.
hence myadvice is if you dont have 3g/4g then the watch may be locked to 4g ONLY and VOLTE as its only mode with the CDC set to something generic EE for example...
Hope this is of assistance as many conplain that the watch wont work stand alone for voice calls or sms properly
my days of time and many esim tests until i got 3g support and 3g-4g auto load lead mr to think that the watch is often
locked to 4g data and VOLTE only ....
I now have done this on watch and watch 3 models with full sucess stand alone pay as you go esims ....with the watch fully stand alone...working like a normal cell phone ....with esim service with a different provider to the sim in my samsung phone
comment please .... hope that helps
Hi. My problem is different from this. I can make and receive calls from My Active2 LTE and I can also send text messages. However, I cannot receive text messages. Basically I bought this watch to rely on this for calls and messages and this got totally disappointed me.
Any advise on how we can receive text messages?
I have had this problem too. The issue is in phone settings. Go to ADVANCED FEATURES and turn on ALLOW CALLS ON OTHER DEVICES also turn on mobile data in this setting.
Hello all
i have a moto z2 play xt1710-08 with android 8.
My Italian operator enabled the VOLTE calls but my Motorola when I call, it switches from 4G to 3G. In the settings I have no entry to enable VOLTE.
So I entered into the secret menu. Here I have both the VOLTE and CALLS WITH WIFI but they are not enabled and I cannot enable them as you see in the screenshot.
How can I enable the VOLTE?
Thanks
specialdo said:
Hello all
i have a moto z2 play xt1710-08 with android 8.
My Italian operator enabled the VOLTE calls but my Motorola when I call, it switches from 4G to 3G. In the settings I have no entry to enable VOLTE.
So I entered into the secret menu. Here I have both the VOLTE and CALLS WITH WIFI but they are not enabled and I cannot enable them as you see in the screenshot.
How can I enable the VOLTE?
Thanks
Click to expand...
Click to collapse
I had a similar problem. I would call your Italian operator back, and once again, ask them to enable VoLTE on your line/account/number. Then, power cycle your phone.
I had the same problem with my USA operator. I called, and got thru to their Tech Support. The Tech Support person started to give me a lecture that VoLTE has been enabled on all accounts, and he stopped his lecture when he saw it wasn't actually enabled for me. He enables it. I power cycled my phone, the Provisioning VoLTE is now shown un-gray'ed, and I flip the slide switch on.
I managed to successfully change the carrier policies on my OnePlus to enable VoWifi and VoLTE in Australia using the guide here: https://forum.xda-developers.com/t/volte-vowifi-and-5g-in-aus.4284047/#post-85119383
My colleague has a Xiaomi Mi 10T Pro - is there a similar set of instructions available to enable VoWifi and VoLTE on that phone in Australia?
In NZ I had success using these Phone codes that turned on VoLTE for me (no VoWIFI for my network). These seem to be standard codes for Xiaomi worldwide that enable support if the underlying software recognises your network's version.
To turn on VoLTE: open your phone app and dial *#*#86583#*#* and you'll see a quick toast message saying it's turned on. Type the code again to turn it off.
To turn on VoWifi: open your phone app and dial *#*#869434#*#*
To check settings *#*#INFO#*#*
Also look under the SIM card settings. If you've enabled either properly there should be a menu item saying "Use VoLTE" and similar.
Once enabled for me it took a few minutes for VoLTE to register. I rebooted, but don't think that was necessary. Now I make VoLTE calls (4G stays in place during the call) and I have a VoLTE icon in the status bar.
I have a GWA2, bought from an authorised and officially supported vendor.
ESIM is activated, watch can register itself onto network whenever it goes out of BT scope.
Internet is also working, so technically the connection works.
However the watch can not make any outgoing calls at all. I contacted Telekom (provider) but they are stating there is no issue has been found on their site.
Once I turned on the VoLTE on the watch (had to send a specific SMS to the provider), calls are working as they should. However there are many locations where VoLTE is not available due to bad signal and at those places the watch is still unable to make calls.
I have completely removed the eSIM and re-registered it. Didn't help.
Is anyone having similar issue recently?