Hi guys,i want your help please i was curious about A13 on my X80 Pro then i wanted to rollback to A12.
The issue is that i downloaded both file from vivo site.
The current rom pd2185f.13.03...w20
The rollback rom is the same w20 but it shows unofficial pack
I also what to know how.. i just want to downgrade because of the blackscreen when calling.Cannot cancel if not the other one will cancel the call
okbakaka said:
Hi guys,i want your help please i was curious about A13 on my X80 Pro then i wanted to rollback to A12.
The issue is that i downloaded both file from vivo site.
The current rom pd2185f.13.03...w20
The rollback rom is the same w20 but it shows unofficial pack
Click to expand...
Click to collapse
@lilddd hello sir.. this is same to my issue
Hi guyz ,just download the rollback from here https://developer.vivo.com/doc/detail?id=120
Turn off the phone and start to recovery mode install update local and choose the file it should go
okbakaka said:
Hi guyz ,just download the rollback from here https://developer.vivo.com/doc/detail?id=120
Turn off the phone and start to recovery mode install update local and choose the file it should go
Click to expand...
Click to collapse
where did you find the LOCAL bro? icant find it
okbakaka said:
Hi guyz ,just download the rollback from here https://developer.vivo.com/doc/detail?id=120
Turn off the phone and start to recovery mode install update local and choose the file it should go
Click to expand...
Click to collapse
I already downloaded this file.. can you show me where?
I just got this on my phone recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I click install software .. its just a network update.. I already save the A12 firmware on my internal storage
gerald1290 said:
I already downloaded this file.. can you show me where?
I just got this on my phone recovery
When I click install software .. its just a network update.. I already save the A12 firmware on my internal storage
Click to expand...
Click to collapse
Sorry i forgot to mention that i downloaded also from official vivo site last asia firmware and put it also along in root folder with the rollback then you can find local source once you enter install software
okbakaka said:
Sorry i forgot to mention that i downloaded also from official vivo site last asia firmware and put it also along in root folder with the rollback then you can find local source once you enter install software
Click to expand...
Click to collapse
You mean 2 firmwares?? the W20 12.0.11.2 and 12.0.11.1? I already put it on the internal storage bro.. I just paste it in internal storage no folders. OR do I need to rename the file?? I dont really see the update file via local
gerald1290 said:
You mean 2 firmwares?? the W20 12.0.11.2 and 12.0.11.1? I already put it on the internal storage bro.. I just paste it in internal storage no folders
Click to expand...
Click to collapse
Yes two firmware ,try to rename the rollback as 12.0.11.12 .
I m telling you what i did exactly ,try on the phone update with w20 12.0.11.2 to receive the message this is an older version something like that then go again to recovery mode and try with it .
I made exactly these steps and local file update poped up for me and went with the rollback.
I tried the 11.10 it says you have an older version.. But when I clicked the 11.2 it says Unofficial..
I will try again to recovery
still nothing pop up.. i dont know what haappen.. @okbakaka only network update
gerald1290 said:
still nothing pop up.. i dont know what haappen.. @okbakaka only network update
Click to expand...
Click to collapse
Try hard reset and repet all the above or keep trying in local update phone and then go to recovery check few times it will appear this is what i got.
Two firmware renamed the roll back to the official one and tried both
okbakaka said:
Sorry i forgot to mention that i downloaded also from official vivo site last asia firmware and put it also along in root folder with the rollback then you can find local source once you enter install software
Click to expand...
Click to collapse
always unofficial update mesage even I rename the rollback firmware.. the only error of lower version is the firmware from official site
gerald1290 said:
always unofficial update mesage even I rename the rollback firmware.. the only error of lower version is the firmware from official site
Click to expand...
Click to collapse
Keep trying with recovery mode till having the local update or try hard reset .
Did you try with vivo updater in pc with the fastboot method ?
okbakaka said:
Keep trying with recovery mode till having the local update or try hard reset .
Did you try with vivo updater in pc with the fastboot method ?
Click to expand...
Click to collapse
Tnx bro its ok now.. I just reverted.. but why there is an UPDATE?? 11.11? should I download it? it says its corrupted file system after I revert back
gerald1290 said:
Tnx bro its ok now.. I just reverted.. but why there is an UPDATE?? 11.11? should I download it? it says its corrupted file system after I revert back
Click to expand...
Click to collapse
Happy it worked for you .yeah download it of course it will correct the files corrupted ,it happens for me also after i downloaded and install it also i did a hard reset .
okbakaka said:
Happy it worked for you .yeah download it of course it will correct the files corrupted ,it happens for me also after i downloaded and install it also i did a hard reset .
Click to expand...
Click to collapse
Thnks bro.. its 11.11 now not the 11.2
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS IS FOR THE ONES WHO DON'T WANT TO COPY PASTE OR FASTBOOT FLASH EVERY IMAGE!!
YOU SHOULD HAVE AN UNLOCKED BOOTLOADER!!!!
Hi, I created this Program so that you can unbrick your moto g 2nd gen, or restore it to the stock firmware! Just run the script and it will do every thing for you!
DISCLAIMER
Code:
IM NOT RESPONSIBLE TO ANYTHING THAT HAPPENS TO YOUR PHONE.
I CANNOT ATTEND THE FUNERALS OF YOUR PHONES.
Anyways, xt1068 users can neglect the disclaimer as it has been tested on it.
And xt106x users can also try it, if you have all the firmware files with you. (read on, you'll get it)
INSTRUCTIONS
1.DOWNLOAD THE exe file(LP OR KK)
2.COPY IT INTO THE FOLDER WHERE YOU HAVE EXTRACTED YOUR FIRMWARE
3.RUN THE EXE FILE
4.OPEN README.TXT AND READ IT. THERE'S A LIST OF FILES YOU REQUIRE IN IT.
5.BOOT YOUR PHONE INTO BOOTLOADER MODE, PLUG IT IN AND CONTINUE.
6.SELECT IF YOU WANT TO LOCK BOOTLOADER OR NOT.
7.EXE WILL DO THE TALKING
8.SELECT IF YOU WANT TO FLASH A CUSTOM RECOVERY (CWM/PHILZ)
8.ENJOY!!
NOTE: IF YOU HAVE SELECTED TO LOCK BL AND YOU GET STUCK IN A BOOTLOOP, RUN RunThisIfYourPhoneDoesntBootAfterBLlock.bat as administrator
DOWNLOADS
FIRMARES (I DO NOT own them)
[just try to find your firmware and i recommend downloading it using Advanced Download Manager(android). Keep no. of Download parts to 9 and auto resume on under download section of slidebar.]
Tool under download tab.
CREDITS
To me for the LOGO
HIT THANKS IF I COULD HELP!! ITS FREE OF COST, YOU KNOW
XDA:DevDB Information
[TOOL][KK & LP]Titan Firmware And Recovery Flasher, Tool/Utility for the Moto G 2014
Contributors
Vidhanth
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-05-02
Created 2015-05-06
Last Updated 2015-05-06
CHANGES
Reserved
Thanks for your work. This tool work for downgrade lollipop to Kk?
gmpdri said:
Thanks for your work. This tool work for downgrade lollipop to Kk?
Click to expand...
Click to collapse
Will work from anywhere. You can flash this on any rom. The only thing is you should be able to boot into bootloader mode.:thumbup:
Vidhanth said:
Will work from anywhere. You can flash this on any rom. The only thing is you should be able to boot into bootloader mode.:thumbup:
Click to expand...
Click to collapse
Hi i have locked bootloader, can i use this for downgrade from Lollipop at kitkat or i will fist unlock bootloader? Thanks
realshaoran said:
Hi i have locked bootloader, can i use this for downgrade from Lollipop at kitkat or i will fist unlock bootloader? Thanks
Click to expand...
Click to collapse
I'm not sure is you should have an unlocked bootloader for this. Anyways, I guess it should work. You can try.
I don't have never unlock the bootloader, my moto g is All stock...
realshaoran said:
Hi i have locked bootloader, can i use this for downgrade from Lollipop at kitkat or i will fist unlock bootloader? Thanks
Click to expand...
Click to collapse
you will need a unlocked boot loader
reefuge said:
you will need a unlocked boot loader
Click to expand...
Click to collapse
Oh... Well, thanks you.
you sure you tried this ?
i just downloaded RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml this has 5 system.img_sparsechunk files and this script only flashes 4 ! would it not cause bootloop
Mirror to the firmware RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml : https://drive.google.com/file/d/0B4wmYm0bnkUAczZOckpBQkhuSms/view?usp=sharing
This is for XT1068 working ,flashed over soaktest. (used manual script)
I think it's obvious that the OP was refering to flashing stock Kit Kat firmware. After all the thread was started a couple of days ago, and the lollipop firmware was uploaded 6-7 hours ago.
notanoob said:
you sure you tried this ?
i just downloaded RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml this has 5 system.img_sparsechunk files and this script only flashes 4 ! would it not cause bootloop
Mirror to the firmware RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml : https://drive.google.com/file/d/0B4wmYm0bnkUAczZOckpBQkhuSms/view?usp=sharing
This is for XT1068 working ,flashed over soaktest. (used manual script)
Click to expand...
Click to collapse
Ok, I'll add a script for flashing lollipop firmware also. And will also update the OP.:thumbup:
And thanks for informing.
What is this 5.0.2 image?
It's user made or is the official image from motorola? @Vidhanth
Hey man, i'd loved this post.
Thank you for your efforts taking this possible, i just wanna ask you if you could upload this file "RETBR_XT1068_5.0.2_LXB22.46-28_cid12_CFC.xml.zip" into a best cloud storage service like dropbox or megaupload.. . it just because i tried download it 3 times =\ and it fail, stuck on 60% at 30kbps
Also could you provide the Md5 of this file please?
raz0r1991 said:
Hey man, i'd loved this post.
Thank you for your efforts taking this possible, i just wanna ask you if you could upload this file "RETBR_XT1068_5.0.2_LXB22.46-28_cid12_CFC.xml.zip" into a best cloud storage service like dropbox or megaupload.. . it just because i tried download it 3 times =\ and it fail, stuck on 60% at 30kbps
Also could you provide the Md5 of this file please?
Click to expand...
Click to collapse
Ok, so is the file on file factory? If yes, I have the secret to download that file from file factory.
Download Advanced Download Manager from the Play Store.
Under download settings, change all preferences like in the screenshot.
Then start the download and keep it downloading overnight.( only because that's the time we have the most patience)
Wake up, and you'll have the file downloaded!
Just for make sure, i need to unlock my bootloader and install TWRP recovery?
I've found TWRP 2.8.4.0 for titan, should it work?
raz0r1991 said:
Just for make sure, i need to unlock my bootloader and install TWRP recovery?
I've found TWRP 2.8.4.0 for titan, should it work?
Click to expand...
Click to collapse
Maybe unlocking bootloader is necessary but twrp is not necessary. And that's for sure:thumbup:
Updating op with serious info. Pls do read.
Update: Done. Updated op
I read the OP again, but could not see any change, what did you have fixed?
raz0r1991 said:
I read the OP again, but could not see any change, what did you have fixed?
Click to expand...
Click to collapse
Only mentioned that the bootloader has to be unlocked
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Someone know how to flash this firmware (NXT-L29C432B584)? TWRP version or any guide?
Im on NXT-L29C432B583 at the moment.
I would really appreciate some help.
you can flash it directly from L29C432B560 to L29C432B584
EDIT:
How to install via HuRUpdater:
1. Downliad the Full-OTA Firmware from Firmware Finder or any other sorce you know
2. unlock bootloader
3. wait till factory reset is finished
4. after factory reset , directly start the bootloader and dont boot up (vol-down + usb<>pc connection)
5. flash twrp (i used twrp-3.1.0-next-v3.img)
6. put B584 firmware and HuRUpdater_0.3.zip in same folder on sd card and rename fw firmware files like this -> update.zip, update_all_hw.zip, update_data_public.zip like described in the original HuRUpdater post -> HuR Updater post
7. flash ONLY HuRUpdater_0.3.zip via TWRP and follow instructions ( it will tell you to press the vol-down button to confirm flash, this is the instruction...)
8. after twrp installed it, just press reboot, it will boot up in unlocked bootloader state with the new firmware after few minutes of watching the huawei logo...
9. relock bootloader for factory reset
Install firmware finder on your phone, and if it approved to install update using in app proxy
M.abdo said:
Install firmware finder on your phone, and if it approved to install update using in app proxy
Click to expand...
Click to collapse
Thank you for your answer, i already tried it and i dont get the update via FirmwareFinder unfortunately... i tryed proxy / dns method and hisuite method via dns ip but i dont get the update message. For B581,B582 and B583 it worked like you said, but not for B584. Maybe you have any other suggestions?
bouuman said:
Thank you for your answer, i already tried it and i dont get the update via FirmwareFinder unfortunately... i tryed proxy / dns method and hisuite method via dns ip but i dont get the update message. For B581,B582 and B583 it worked like you said, but not for B584. Maybe you have any other suggestions?
Click to expand...
Click to collapse
Maybe it's not approved for installation yet
Did you check if it's approved or not using emui number?
You can do so by clicking the check firmware access button
M.abdo said:
Maybe it's not approved for installation yet
Did you check if it's approved or not using emui number?
You can do so by clicking the check firmware access button
Click to expand...
Click to collapse
no its not approved yet, so there its no chance to install it if its not approved?
bouuman said:
no its not approved yet, so there its no chance to install it if its not approved?
Click to expand...
Click to collapse
There is but it's better to wait untill it's approved
Use HuRUpdater. Find in Honor 9 topic.
Agadoo said:
Use HuRUpdater. Find in Honor 9 topic.
Click to expand...
Click to collapse
worked THANK YOU!
bouuman said:
Thank you for your answer, i already tried it and i dont get the update via FirmwareFinder unfortunately... i tryed proxy / dns method and hisuite method via dns ip but i dont get the update message. For B581,B582 and B583 it worked like you said, but not for B584. Maybe you have any other suggestions?
Click to expand...
Click to collapse
I got mine upgraded from B583 to B584 using the proxy method.
srdjmor said:
I got mine upgraded from B583 to B584 using the proxy method.
Click to expand...
Click to collapse
yes its now approved for installation from firmware finder, now it can be installed through fw finder.
Anyway to unlock bootloader free?
sPlease advise the link of twrp-3.1.0-next-v3.img
My a520f has a A520FXXU7CRJG bootloader, is it possible to downgrade my phone to nougat with A520FXXS7CRJC since they have the same firmware revision 7. Btw i found that nougat firmware with rev7 on sammobile. THANKS
kopaks said:
My a520f has a A520FXXU7CRJG bootloader, is it possible to downgrade my phone to nougat with A520FXXS7CRJC since they have the same firmware revision 7. Btw i found that nougat firmware with rev7 on sammobile. THANKS
Click to expand...
Click to collapse
Yes, you can because I do it without any problem!
MSandMan said:
Yes, you can because I do it without any problem!
Click to expand...
Click to collapse
oh finally! someone who doesn't say "it is impossible to downgrade" thanks for the information sir! have a nice day.
kopaks how is whit the downgrade ?
Naikkon said:
kopaks how is whit the downgrade ?
Click to expand...
Click to collapse
I'm not him but I did the downgrade and until now everything works just fine. My a5 2017 is unlocked but even with the locked firmware A520FXXS7CRJC I can use both chips.
I'm currently using A520FXXS7CRI8 BL which is for UAE so if I flash this firmware will I have a problem because CSC's are different and plus didyou have cell standby problem while you were using Oreo and if you had, was it fixed after you downgraded to Nougat?
When I try to install Nougat with Odin I get this error into my A5 17 in download mode:
sw rev. check fail(bootloader) device: 7, binary: 4
Also the flash in Odin fails after it tries to insert the param.bin file.
Someone has some clues or can provide me some help, please?
Thank you :angel: :angel:
it is just an idea of mine, i haven't tried it before. since i switched to lineage 16. but i will try when i switch back to los 14
rty678 said:
When I try to install Nougat with Odin I get this error into my A5 17 in download mode:
sw rev. check fail(bootloader) device: 7, binary: 4
Also the flash in Odin fails after it tries to insert the param.bin file.
Someone has some clues or can provide me some help, please?
Thank you :angel: :angel:
Click to expand...
Click to collapse
Your firmware you are trying to flash isn't the the same or higher version of bootloader. It would happen if you tried flashing nougat after you upgraded to Oreo. Even if you flashed Oreo on Oreo that had a later security patch.
iloveoreos said:
Your firmware you are trying to flash isn't the the same or higher version of bootloader. It would happen if you tried flashing nougat after you upgraded to Oreo. Even if you flashed Oreo on Oreo that had a later security patch.
Click to expand...
Click to collapse
Thank you!! Finally I understand what that weird error means. ?
How I can get through it? Can you guys help me?
rty678 said:
Thank you!! Finally I understand what that weird error means. ?
How I can get through it? Can you guys help me?
Click to expand...
Click to collapse
Try flashing just the system and boot partition.
iloveoreos said:
Try flashing just the system and boot partition.
Click to expand...
Click to collapse
Is it safe?
rty678 said:
Is it safe?
Click to expand...
Click to collapse
Make sure you do a backup first. It is very likely to bootloop. So make sure you have the latest firmware on hand just in case. I would also make sure bootloader is unlocked. And you should probably factory reset before hand. Last thing, make sure you flash the boot partition not the bootloader.
Okay! Any clue on witch nougat firmware should I download from sammobile in order to make it work?
rty678 said:
Okay! Any clue on witch nougat firmware should I download from sammobile in order to make it work?
Click to expand...
Click to collapse
What is your model number?
iloveoreos said:
What is your model number?
Click to expand...
Click to collapse
SM-A520F
rty678 said:
SM-A520F
Click to expand...
Click to collapse
Pick your country and you should be fine https://www.sammobile.com/firmwares/galaxy-a5/SM-A520F/
iloveoreos said:
Pick your country and you should be fine https://www.sammobile.com/firmwares/galaxy-a5/SM-A520F/
Click to expand...
Click to collapse
Perfect!
Now you or some other users can provide me a link to a guide/manual where I can learn more about this bootloader problem? Furthermore I'll be okay with the latest 7.0 OFW?
Thank you
rty678 said:
Perfect!
Now you or some other users can provide me a link to a guide/manual where I can learn more about this bootloader problem? Furthermore I'll be okay with the latest 7.0 OFW?
Thank you
Click to expand...
Click to collapse
The bootloader problem where OEM unlock toggle is gone? Here is a guide for that. https://forum.xda-developers.com/sa...ide-root-install-twrp-samsung-t3747535/page46
I don't know if the latest 7.0 firmware will even work. But you could try it and remember to have the latest 8.0 firmware on hand just in case.
iloveoreos said:
Try flashing just the system and boot partition.
Click to expand...
Click to collapse
Hello I flashed my a520f with only AP file without boot.img, got a bootloop, then I turned back to A520FXXS8CSB1 of my region (MWD) and I flashed all files with home_cs and no boot.img in the AP file, now I cannot turn on wifi, any help will be apreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In summary
1) I was in A520FXXS7CSAB with boot.img of U5 Region WMD (original) (oreo)
2) Flashed AP file of A520FXXS7CRJC Region CTI without boot.img (nougat)
3) Got boot loop
4) Flashed A520FXXS8CSB1 of my region (MWD) and I flashed all files with home_cs and no boot.img in the AP file
5) Unable to activate wifi.
Hello everyone, I am using an op9p with unlocked bootloader, and it is running oos 12 open beta2 now. Few days ago, Oneplus published a new update called C36, and I am trying to upgrade to it. However, each time I try to upgrade, I only got an "installation problem. Then I turned to the OxygenOS Updater, but even the update showed a "damaged file". Finally I download a file from the link, and I got a zip called "3a08e6de926493aedc3e04ee8b23476077c5b553.zip", which checksum is just like the pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The expected md5 checksum in updater is "b121be03d8175bee2da76184a3719211", as you can see, it's different. But its SHA-1 checksum is just exactly equal the file name, so I am not sure about that if I have downloaded the right file now. Also, the local upgrade app can't see this zip.
Is there anyone already upgraded to the OB3? Or somebody can share his upgrade file? Thanks!
Gaojianli2333 said:
Hello everyone, I am using an op9p with unlocked bootloader, and it is running oos 12 open beta2 now. Few days ago, Oneplus published a new update called C36, and I am trying to upgrade to it. However, each time I try to upgrade, I only got an "installation problem. Then I turned to the OxygenOS Updater, but even the update showed a "damaged file". Finally I download a file from the link, and I got a zip called "3a08e6de926493aedc3e04ee8b23476077c5b553.zip", which checksum is just like the pic
View attachment 5475689
The expected md5 checksum in updater is "b121be03d8175bee2da76184a3719211", as you can see, it's different. But its SHA-1 checksum is just exactly equal the file name, so I am not sure about that if I have downloaded the right file now. Also, the local upgrade app can't see this zip.
Is there anyone already upgraded to the OB3? Or somebody can share his upgrade file? Thanks!
Click to expand...
Click to collapse
No dice. Afaik you need to use roll back zip, then flash ob1, ob2 and then ob3. Too much of hassle imo
pyry666 said:
No dice. Afaik you need to use roll back zip, then flash ob1, ob2 and then ob3. Too much of hassle imo
Click to expand...
Click to collapse
and each time upgrade I need to repeat this? Or I can't root my device? Oh god, that's too painful
Gaojianli2333 said:
and each time upgrade I need to repeat this? Or I can't root my device? Oh god, that's too painful
Click to expand...
Click to collapse
Pretty much yes. Unless some one can figures out some solution. I tried flashig stock vbmeta and boot. Still didnt work. This incremental bs is crap. This is probably my last op device...
Download the update.
Download the "Local Update.apk. Run it.
I had a similar problem. From OB1 (rooted) I couldn't get OB2 installed using system update or the local update app. I tried flashing stock boot.img and vbmeta to unroot, but it didn't make any difference. Finally after OB3 came out (I was still on OB1), I reinstalled OB1 full zip using local upgrade app, took the OTA for OB2, then took the OTA for OB3 before rooting again. But now I'm probably stuck like you until the next full update is released (or we have to roll back for stable).
null0seven said:
Download the update.
Download the "Local Update.apk. Run it.
Click to expand...
Click to collapse
I can't see the update in the local update app
Gaojianli2333 said:
I can't see the update in the local update app
Click to expand...
Click to collapse
You cant. First downgrade, then ob1 etc. This is total sht...
pyry666 said:
You cant. First downgrade, then ob1 etc. This is total sht...
Click to expand...
Click to collapse
Downgrade from ob2 will lost all of my data, right?
Gaojianli2333 said:
Downgrade from ob2 will lost all of my data, right?
Click to expand...
Click to collapse
Yes. I dirty flashed "stable" A12 over ob2. Seems to work
A
< How to upgrade to Oxygen OS 12 Open Beta 3(
ÇIXDA
Problem is to me... Oxygen Updater is loading a confusing long named zip file and the lokal Updater app didn't find the zip file on phone. The Name of the zip is wrong or something like that. Other Updates zip files with typical name does it find.
I am trying to update my OP11. I follow the guide and what it says to do but my updates still fail at 59%. Anyone have any idea how to update it easy? I don't feel like rerooting it every update.
cabagekiller said:
I am trying to update my OP11. I follow the guide and what it says to do but my updates still fail at 59%. Anyone have any idea how to update it easy? I don't feel like rerooting it every update.
Click to expand...
Click to collapse
Update with Magisk installed? Did you restore the stock boot.img before updating?
WoKoschekk said:
Update with Magisk installed? Did you restore the stock boot.img before updating?
Click to expand...
Click to collapse
Yes I did. I don't reboot the device when I do it do I?
cabagekiller said:
Yes I did. I don't reboot the device when I do it do I?
Click to expand...
Click to collapse
No, do not reboot. But grab some logs from logcat and dmesg (kernel log) after update process fails. You just need the last lines when you grab it right after the error message.
1. Start update process
2. As soon as it fails open a terminal app and execute
Code:
logcat > /sdcard/logcat.txt
dmesg > /sdcard/kernel.txt
3. Find the logs in your intenal storage and have a look at the last lines of it.
You need to execute those commands as root (su).
cabagekiller said:
I am trying to update my OP11. I follow the guide and what it says to do but my updates still fail at 59%. Anyone have any idea how to update it easy? I don't feel like rerooting it every update.
Click to expand...
Click to collapse
you download stable full package in oxygen updater than flash with local updater apk.
sefai77 said:
you download stable full package in oxygen updater than flash with local updater apk.
Click to expand...
Click to collapse
Us have no full pack
ChrisFeiveel84 said:
Us have no full pack
Click to expand...
Click to collapse
But the updated firmware images on your device. Extract and upload them for other users, so they could be flashed on their devices to the inactive slot via fastboot. To know which partitions are needed you could extract a payload.bin of a full rom OTA update in other countries.
WoKoschekk said:
But the updated firmware images on your device. Extract and upload them for other users, so they could be flashed on their devices to the inactive slot via fastboot. To know which partitions are needed you could extract a payload.bin of a full rom OTA update in other countries.
Click to expand...
Click to collapse
Will Not work he have an usa model and the usa inrcemantal Update will fail when he have eu full rom on his phone
ChrisFeiveel84 said:
Will Not work he have an usa model and the usa inrcemantal Update will fail when he have eu full rom on his phone
Click to expand...
Click to collapse
I guess, there should be at least one user in the OP 11 forum here at XDA with a successful installed OTA update for US region. On this device you have the fully updated entire firmware images, that can be copied, uploaded and flashed on all the other devices that are not able to load the incremental OTA update due to root.
I was shown this picture,, what does this issue?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IronSkillet said:
I was shown this picture,, what does this issue?
View attachment 5866531
Click to expand...
Click to collapse
in the photo it looks like it couldn't download otas if you look at this (that's not a real rom name)
or an extra rom that is not intended for everyone " don't take it too seriously ")
How would he get rid of the problem?
This guy insisted the phone is broken..
I just want to point out a solution for the issue
IronSkillet said:
How would he get rid of the problem?
This guy insisted the phone is broken..
I just want to point out a solution for the issue
Click to expand...
Click to collapse
Is this a china op11 with oos on it ?
Yes, I guess he also had A_07 when he received the phone
I had used OxygenUpdater and it had no issues going A_08 ,
IronSkillet said:
Yes,
Click to expand...
Click to collapse
Than you have to download the rom and flash it over fastbootd and than flash the cos image back (only oplusstanvbk.img needed from cos 13 a10 build)
Ok,. Do you know a reputable community member who could do this process for him via remote support?
IronSkillet said:
Ok,. Do you know a reputable community member who could do this process for him via remote support?
Click to expand...
Click to collapse
Youtube video
Is easy to flash a phone with fbe and fasbootd and than flash thr the image from coloros oplusstanvbk.img
To the oplusstanvbk partition and reboot
He somehow doesn't want to make any effort in understanding the phone...
Anyone who can do this for him?
IronSkillet said:
He somehow doesn't want to make any effort in understanding the phone...
Anyone who can do this for him?
Click to expand...
Click to collapse
This he have to make for all Updates