Develop Bugs

[Case]Case compatibility list for 2000mah kit

Hello all,
As i'm sure some of you have been trying to find a case that fits the 2000mah kit from Samsung and having a lot of trouble? well being a case whore i'm building a collective list of cases which do or do not fit, if you have any info please PM me and i'll add your results to the list, please PM fitting and non fitting cases, but please CTRL+F and search for the case your going to PM me incase it's already on the list. without further ado;
DOES FIT
[CM014056] Case-Mate Tough (However it is very tight, and ideally need the rear rubber being trimmed OR removed back cover)
[CM015699] Case-Mate Safe skin (Fits but has a loose area below camera)
[EF-C1A2B*EC] Samsung Galaxy S2 Flip Cover (Rear side cut out around battery cover, perfect fit)
[EF-CA12P] Samsung Leather Pouch Case (Tight but fits, some screen protectors may dislodge)
[Not Known] Samsung D30 Galaxy S II Leather Slip Case (Tight but fits, some screen protectors may dislodge)
[EF-C1A2LBEC] Samsung Galaxy S II Leather Pouch Case (Fits fine)
[Not Known] SGP Samsung Galaxy S2 Case Neo Hybrid EX (Fits fine)
[Not Known] SGP Linear Series (Fits)
[Not Known] SGP Samsung Galaxy S2 Case Neo Hybrid (Fits but has a loose area below camera)
[Not Known] SGP Neo Ultra capsule (Fits)
[F8M136EBC00] Belkin Samsung Galaxy Swell Grip Graphix (Fits but loose around camera area)
[Not Known] Nillkin TPU (Nearly Perfect)
[SAM4-I9100-20-E4OTR_A] Otterbox Commuter for Galaxy S2 (Fits, slightly loose area above the extended battery cover)
[ICPSAI9100D1D] i Case Pro (Fits)
[Not Known] Aeonaz POLARBEAR (Light modification required)
[Not Known] Zenus Air Jacket
[3BSSGXF41] PDair Leather Case Flip Type
[Not Known] Rearth Ringke Case
[CM014641] Case-Mate Pop Case
DOES NOT FIT
[CM014048] Case-Mate Barely There Case (Will not clip on at all)
[SAMGS2CCBL] Samsung Genuine Mesh Vent Case (Will no clip on at all)
[EEB-U20BBUG] Samsung S2 Power Pack (Cannot align usb connector without damage)
[EF-GS2L] Samsung Moulded Leather Flip Case (clips cannot stretch to phone body due to moulded back)

Some pics would be realy realy nice, so everybody could see how it fits and if they could get used to it.
EDIT: Also you can add the SGP Neo Hybrid and SGP Neo Hybrid EX to the list. First one has a loose are around the camera (as seen in another thread) and the other one fits nicely.

I would put some pictures up but I don't own all of them, and a few I've checked out in Retail stores, however If I buy any that fit, i'll make sure I post up photos of the fit.

Then just put the pictures in you own. Some others who have the extended battery and a case could send you their pictures and you could implement them into your post.
When I get my S2, 2000 mAh battery and decided for a case i will do some pictures for you, too.
PS: You could link every name of the cases to their official pages, too.
Here are some:
SGP Neo Hybrid EX: sgpstore.com/cell-phone/samsung/galaxy-s2/sgp-samsung-galaxy-s2-case-neo-hybrid-ex-series.html
SGP Neo Hybrid: sgpstore.com/cell-phone/samsung/galaxy-s2/sgp-samsung-galaxy-s2-case-neo-hybrid-series.html
Case-Mate Tough: case-mate.com/Samsung-Galaxy-S-II-Cases/Case-Mate-Samsung-Galaxy-S-II-Tough-Cases.asp
Case-Mate Barely There: case-mate.com/Samsung-Galaxy-S-II-Cases/Case-Mate-Samsung-Galaxy-S-II-Barely-There-Cases.asp
Hope I can help improving your thread I think your thread can help very many people.

Would love to know about the Otterbox Commuter compatibility.

anyone tried with casemate pop? might as well getting 2000mah battery rather than getting another spare samsung ori battery if pop case fits well

jytow0716 said:
anyone tried with casemate pop? might as well getting 2000mah battery rather than getting another spare samsung ori battery if pop case fits well
Click to expand...
Click to collapse
I've tried it and sad to say it just wouldn't fit

Add nilkin tpu..almost perfect fit
Sent from my GT-I9100 using xda premium

What about this Case:
- Belkin Grip Graphix Swell Does it fit?

would really like to find out if the pleomax casing able to fit?

zOunda said:
What about this Case:
- Belkin Grip Graphix Swell Does it fit?
Click to expand...
Click to collapse
Hi all!
Yes, as most soft cases the Graphix fits, but you'll see some looseness in the camera section. Also, I did not like the grip of this case at all, it felt slippery imo.
I went for the Neon hybrid instead, very satisfied.

How tight is the fit on the Case Mate Tough case with the 2000mah battery? I like the look of it and just placed an order for it. Is it so tight that there's a risk of damaging the phone?

Zenus Skin Air Jacket
Just got the new battery and put it in my Zenus Skin Air Jacket... dont know what to say... sadly it doesnt fit... but its useable.
The edge of the phone comes out a bit and therefore the access to the volume and powerbutton is limited.
I made some photos but cant post the links due lack of postcount

The Walnutt bumper fits for sure, but hell, it it even fits my Momax 2700mah Expower batts, so that's a moot point.

I am within the M25 and have an otterbox for my S2 if you need to try it then pm me.

what is the sense of using a bumper of a sgp neo hybrid ?
i mean, isnt the purpose of a case to cover the whole phone? both the examples above mentioned appear to just cover the borders of the phone, leaving uncovered the whole back of it.
actually sgp neo hybrid series sounds just like a overpriced bumper.
anyone, can prove the opposite?
actually i am very interested in this because it looks like there is no real hard non/bumper case fitting with the new battery: and the only (crappy) solutions appear to be either bumpers or gum/rubber cases ...

sooby77 said:
How tight is the fit on the Case Mate Tough case with the 2000mah battery? I like the look of it and just placed an order for it. Is it so tight that there's a risk of damaging the phone?
Click to expand...
Click to collapse
IT fits but the rubber part is under a small amount of pressure, pushing the phone out of the hard plastic casing. it is MINIMAL, if your like me and fiddle with your phone all the time, it is just a case of pushing it with the lightest touch back in.
It won't damage the phone unless your trying the impossible (pushing the phone into the bottom cutout.) and pushing so hard you crack the hard plastic shell in otherwords impossible. the ideal would be to cut the rubber out in the shape of the battery lid compartment. on the rubber part, then assembling with the hard casing. so you remove the tension off the added thickness.

if I have a hybrid neo spg .... and put the battery without the back cover ... only with the case spg ... looks good? or can cause problems? (Sorry for my English)
Enviado desde mi GT-I9100 usando Tapatalk

diablous said:
IT fits but the rubber part is under a small amount of pressure, pushing the phone out of the hard plastic casing. it is MINIMAL, if your like me and fiddle with your phone all the time, it is just a case of pushing it with the lightest touch back in.
It won't damage the phone unless your trying the impossible (pushing the phone into the bottom cutout.) and pushing so hard you crack the hard plastic shell in otherwords impossible. the ideal would be to cut the rubber out in the shape of the battery lid compartment. on the rubber part, then assembling with the hard casing. so you remove the tension off the added thickness.
Click to expand...
Click to collapse
Cool. Thanks for the detailed description. I hate to mangle new case, but I may have to do that. Wonder if cutting out the battery compartment rubber part may reduce shock resistance of the case.

Can anyone tell me if it will fit in the Samsung Leather Pouch?
If not are there any other 'pouch' style cases that will?
thanks

[Q] Dealextreme case/protector

Hi guys
I want to know if anyone has any of this three cases and how they fit on the phone.
Protective Rubber Gel Silicone Back Case for i9100 Galaxy S2 - Translucent Grey
Protective Plastic Mesh & Silicone Back Case for Samsung i9100 Galaxy S II - Black
Stylish Protective Aluminum Housing Silicone Back Case for Samsung Galaxy S 2/i9100 - Black
Thanks

Protective Rubber Gel Silicone Back Case for i9100 Galaxy S2 - Translucent Grey
I have this one, but then in black.
It is very nice for the money, good grip, and cheap

Does it cover camera nicely?

I got mine Protective Rubber Gel Silicone Case for Sumsung i9100(black) at mininthebox.com, they have a pretty good selection, dirt cheap prices and free shipping.
You do have to consider if you have a Korean or non-Korean model, because most cases will cover the TV antenna.

I've got this mesh case.. It's actually a very good case for the money.. Does not differ much from an original Samsung mesh case (which i had for my SGS1).
http://www.dealextreme.com/p/mesh-p...ase-for-samsung-galaxy-s-ii-i9100-black-82636

[Links - Updated] T-Mobile SGSII Cases

Here I am going to compile the links for the various cases that have come out for our phone so far. Some of the other links will be listed as coming soon if the sites advertise it. Hope you find this helpful.
D30
Galaxy S II D3O® Flex Protection Cover - Black
·Smooth, flexible gel-like material protects your phone
·Made with military grade D3O® intelligent technology
·D3O® molecules lock together to absorb shock
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=5107c2ec-a5f3-415d-b2d0-0254711cf682&inCart=True&catCode=21
Galaxy S II D3O® Dual Impact Case - Black
·One piece glossy black shell with a flexible black inner layer
·Made with military grade D3O® intelligent technology
·D3O® molecules lock together to absorb shock
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=be783423-6455-4083-aaf0-be9d9ec37094&inCart=True&catCode=21
Body Glove
Galaxy S II Body Glove Diamond Shell - White
·Hard glossy shell fused with a soft, rubbery band
·Flexible band provides a unique look and easy on/off
·Soft rubbery interior lining for added protection
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=7efb7ab9-df37-49c0-bf46-997e82ded448&inCart=True&catCode=21
Galaxy S II Body Glove Revel Shell
·Two piece hard shell with protective textured material
·Detachable rotating clip coverts into a kickstand
·Allows access to all ports and controls
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=4d217c7f-401a-45f8-93ee-8f96ecc6571a&inCart=True&catCode=21
Galaxy S II Body Glove Silver Fade Shell
·Gray paint with silver stripe design
·Built-in kickstand sits flush when not in use
·Allows access to all ports and controls
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=fb03b015-e3f0-49db-a9f1-3e2d51843af7&inCart=True&catCode=21
Trident
Not yet available, but will be at http://www.tridenteer.com/ before the end of the year.
Seidio
ACTIVE™ case
- Overall thickness of only 2.2 mm
- Interior casing made from impact absorbing polymer and exterior skeleton provides extra protection at impact points
- Easy to put in and pull out of your pocket or purse and grooves for easy gripping
- Compatible with ACTIVE™ holster
ACTIVE Holster™
- Felt-lined holster with face-in design keeps your T-Mobile Samsung Galaxy S II safe
- Unique spring clip lifts for quick access and easy removal
- Adjustable swivel belt clip with 7 rotating angles
- For use with ACTIVE™ case only
Coming soon @ http://www.seidioonline.com/category-s/7239.htm
Incipio
Incipio Feather Case
The feather® for T-Mobile Samsung Galaxy S™ II protects the back and sides of your device while maintaining full access to all touchscreen controls. Custom cutouts to all ports and buttons allow you to charge your device or adjust volume without having to remove your case.
http://www.myincipio.com/Samsung-Galaxy-S-II-T-Mobile-Cases-Accessories/Incipio-Samsung-Galaxy-S-II-T-Mobile-feather-Ultralight-Hard-Shell-Case.asp
Incipio Silicrylic Case
- The SILICRYLIC® for T-Mobile Samsung Galaxy S™ II safeguards your device while allowing complete access to ports and functions with custom cutouts and raised covered buttons.
- Hybrid design combines hard shell polycarbonate and shock absorbing silicones
http://www.myincipio.com/Samsung-Galaxy-S-II-T-Mobile-Cases-Accessories/Incipio-Samsung-Galaxy-S-II-T-Mobile-SILICRYLIC-Hard-Shell-Case-with-Silicone-Core.asp
Ballistic
Ballistic Shell Gel
-Advanced three layers of protection
-Layer 1 - Ballistic shock absorbent polymer
-Layer 2 - Tough impact resistant polycarbonate shell
-Layer 3 - Soft silicon, equipped with Ballistic Corners™
-Includes lay on table feature
-Pocket-able protection
http://www.ebay.com/itm/BALLISTIC-SG-CASE-GALAXY-S2-SX-ll-4G-T989-TMOBILE-TELUS-COMPARE-2-OTTERBOX-/160675376613?pt=LH_DefaultDomain_0&hash=item2568ffade5
Diztronic (formerly TPU-Cases
Diztronic Cases
-Made of Durable, Slip-Resistant TPU Material
-Matte Back Prevents Fingerprints - High Gloss TPU Frames the Screen
-Solid Protection from Drops and Scratches Protects Your Investment
-Excellent Impact & Abrasion Resistance
-Stronger, Tougher Case Solution than Silicone
-Precise Cutouts Gives Full Access to all Ports, Camera, Power Button & Volume Rocker
http://tpu-cases.com/index.php?main_page=index&cPath=42_39
Mofi
Mofi Pouches (YES Pouches!)
"CLASSIC Series" High End GENUINE MOFI Pouch
Plush and Soft feel - Inner and Outer finish
A superior Protector and quality look
Automatically cleans your phone
Padded design offers shock protection
VERY SOFT-Highest Quality Velour Micro Fibre
http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&rd=1&item=150689038997
PowerSKIN
Case with Rechargeable Battery
-One piece silicone case with rechargeable built-in battery
-LED battery status lights and on/off button
-Charging cable included
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=763b541c-ac26-42d7-b856-52b22b47251a&inCart=True&catCode=22
Beyond
Beyond Case & Holster Combo
- 1 elegant snap-on protex case
- 1 Supreme Holster (Kickstand function & Made from Supreme Quality Material)
- 1 Screen Protector included.
http://www.amazon.com/Holster-Samsung-Galaxy-T-Mobile-T989/dp/B005TWBLEI/ref=sr_1_15?ie=UTF8&qid=1321399605&sr=8-15
Cimo
Cimo S-Line & TPU Cases
-Designed for easy access to all of the features of your Samsung device.
-Anti-slip properties gives your Samsung Galaxy S ll,Hercules more grip on surfaces
-Easy to slip on your device, yet stays on securely
-Front raised edges recess your screen to protect it when placed face down
-Custom Fit to T-Mobile Samsung Galaxy S ll, Hercules
http://www.cimousa.com/Galaxy-S-II-T-Mobile-Samsung/b/3229480011?ie=UTF8&title=Galaxy%20S%20II%20-%20T%20Mobile
If anyone has any suggestions or cases that I have missed, feel free to add them with corresponding links.

I like this thread. If it stays updated I'd like to see it get stickied.
I hear trident cases coming but has this been confirmed or is it just rumored?

Nice thread. If its possible to make a poll for these. That would be a lot better.
Thanks!

This will definitely be updated. I look at it as my contribution to our community. Doing some more research now.
Sent from my Juggernaut SGSII or Galaxy Tab 10.1 now "In Paris"

iTablet said:
Nice thread. If its possible to make a poll for these. That would be a lot better.
Thanks!
Click to expand...
Click to collapse
I'll look into making a separate poll that links to this.
Sent from my Juggernaut SGSII or Galaxy Tab 10.1 now "In Paris"

Diztronic -> http://tpu-cases.com/index.php?main_page=index&cPath=42_39

bhowanidin said:
This will definitely be updated. I look at it as my contribution to our community. Doing some more research now.
Sent from my Juggernaut SGSII or Galaxy Tab 10.1 now "In Paris"
Click to expand...
Click to collapse
Poll for what? People want different cases for many variables
Sent from my SGH-T989 using xda premium

rawsx said:
Poll for what? People want different cases for many variables
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Just a poll to see what's popular, and for people to get an idea of what others are using. Problem?
Sent from my Juggernaut SGSII or Galaxy Tab 10.1 now "In Paris"

Case-Mate
Pop, Barely there, and Tough.
http://www.case-mate.com/Samsung-Galaxy-S-II-Cases/Samsung-Galaxy-S-II-Cases.asp
The Pop case has a stand. Nice.
http://www.case-mate.com/Samsung-Ga...ate-Samsung-Galaxy-S-II-Pop-Cases-w-Stand.asp

bobbyphoenix said:
Pop, Barely there, and Tough.
http://www.case-mate.com/Samsung-Galaxy-S-II-Cases/Samsung-Galaxy-S-II-Cases.asp
The Pop case has a stand. Nice.
http://www.case-mate.com/Samsung-Ga...ate-Samsung-Galaxy-S-II-Pop-Cases-w-Stand.asp
Click to expand...
Click to collapse
Have these been confirmed for our version?
Sent from my Juggernaut SGSII or Galaxy Tab 10.1 now "In Paris"

bhowanidin said:
Have these been confirmed for our version?
Sent from my Juggernaut SGSII or Galaxy Tab 10.1 now "In Paris"
Click to expand...
Click to collapse
Yes. I got an email from them after asking. Should be this month.
You can keep checking here:
http://www.case-mate.com/pulse/samsung-carriers.asp

Ok, thanks. Will be updating this list with the suggestions as well adding the Ballistic case as soon as possible.
Sent from my Juggernaut SGSII or Galaxy Tab 10.1 now "In Paris"

these pouchs also nice，good quality
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=150689038997

Galaxy S II Body Glove Revel Shell <-- really like that case. anyone tried them? hows the kickstand?

ijaved said:
Galaxy S II Body Glove Revel Shell <-- really like that case. anyone tried them? hows the kickstand?
Click to expand...
Click to collapse
This is what I am using and love it until something better comes out. The kickstand is decent, I just like the added protection. Has held up well on a number of drops.
Sent from my Juggernaut SGSII or Galaxy Tab 10.1 now "In Paris"

]Galaxy S II Body Glove Revel
Galaxy S II Body Glove Revel Shell[/URL] <-- really like that case. anyone tried them? hows the kickstand?[/QUOTE]
i t look nice and feel good but last about 3 week the top benzel keep getting loose so i wenty back and got a D30 flex protective cover.It great so far

I just saw these cases and was intrigued by them: http://www.ebay.com/itm/Samsung-Her...094614?pt=PDA_Accessories&hash=item2a1642ac16 Does anyone know if these are a good fit? I think im gonna try them on my SG2 but I was wondering if anyone else had any experience with them?

Has anyone tried the incipio feather case? Looks nice. I hate cases that make the phone heavy.

I just got and installed the incipio silicrylic case, got it for $25 with online coupon. Fits perfectly, adds just the right amount of weight, and the phone feels really protected now. I'm glad I got this one - the feather light case looks nice too - but this has that case with a snap on plastic shell that fits and looks great!

Glen_PxC said:
Has anyone tried the incipio feather case? Looks nice. I hate cases that make the phone heavy.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1341810

[REVIEW][VIDEO] Ballistic SG MAXX Series Case for the Samsung Galaxy S3 (SIII)

http://youtu.be/tKm14N17aSk
On Saturday, we headed out to our local mall in an attempt to find a case for our new Sprint Samsung Galaxy S3 that we purchased off of Craigslist. As no surprise to us it was easier to find accessories than the actual phone. As you know if any phones are out there, they were probably a pre order. Sprint stores just began selling today.
AT&T had the best selection actually. There were a few Casemate cases, Body Glove, the Samsung flip cover thingamajig, and this Ballistic case. Since there wasn't an Otterbox anywhere to be found locally, I pulled the trigger on the Ballistic case.
On their website it appears that the silicone portions are very well manufactured. You don't see the little ridge going around it (probably from two pieces put together) and the other imperfections. That makes it really look like a premium product. Otterbox pretty much has their manufacturing process down to a science.
One thing they note on the clip is that the device can only be mounted faced towards the inside. This is great, but I do like option on most Otterbox Defender cases where I can turn it outwards. The clip swivels 360 degrees. That's definitely a plus. It's annoying when clips can't spin the full 360 degrees.
Here are some details from their website:
It’s time to live your life to the Maxx. The Samsung GALAXY S III’s minimal and organic design is reflected in the smooth and non-linear lines of the device. Its human-centric nature provides an ergonomic and comfortable experience with enhanced usability.
Our Ballistic SG Maxx Series offers 4 layers of the best engineered drop protection on the market. This baby offers a durable holster, port covers, a no-slip grip, reinforced corners, but most important a replaceable, rigid, screen protector that provides amazing impact protection.
Advanced four layers of protection
Layer 1 - Molded screen protector provides impact protection for your screen
Layer 2 - Ballistic shock absorbent polymer
Layer 3 - Tough impact resistant polycarbonate shell
Layer 4 - Soft silicone equipped with reinforced Ballistic Corners™
Includes lay-on-table feature - screen will not touch the surface when layed flat on a table
No-slip stability when layed face down
Integrated port covers
Extremely durable horizontal holster
Rigid screen protector provides impact protection and is user replaceable
Click to expand...
Click to collapse
If you really think you're going to stay with this device and case for a while the user replaceable screen protector might be an advantage to you. The plastic screen protector will probably offer more impact protection that a ZAGG InvisibleSHIELD or something similar. However, especially when looking a white screen, you can tell how much worse the view is. You can see all the colors of the rainbow. This does happen with most Defender screen protectors I've seen and to a little extent in other products. Good news here is that you can replace that portion with a ZAGG or whatever you desire.
You can lay the phone face down with this case. I find this handy in office environments where you don't want people to know that everyone including your mother are blowing up your phone with texts or Facebook messages.
I'm not keeping this case, but it does offer a lot of protection. I think I'll keep my S3 sleek and sexy for now.
MSRP $49.99 (cost $50 at AT&T store)
Official Page: http://www.goballisticcase.com/products/samsung-galaxy-s-3-ballistic-sg-maxx-series-case
Ballistic Cases on eBay.
I already know one person who might respond that this is not the SG MAXX case, but it is. Just saying that I honestly don't believe they would push out 10 of these cases to one store with some the wrong labeling.
By the pictures on their site you can see that the plain SG series does not come with a clip AND there is no 3.5mm headphone jack port.
On the bottom, by the capacitive touch buttons I do have a bump that makes it harder to hit the menu and back buttons. On their website neither case has these. They might have made changes. This could be an early production run. I'd hate for them to have added them later. The cut of the silicone just isn't clean in my opinion, and I'm really not a big stickler on stuff. It just looks like something with a made in China sticker.

Man i used Ballistic with all my other fones seems they dropped the ball with the one for the S3 what were they thinking with the clearance of the buttons

Karl said:
Man i used Ballistic with all my other fones seems they dropped the ball with the one for the S3 what were they thinking with the clearance of the buttons
Click to expand...
Click to collapse
This is a nice comparison of the Ballistic case for Galaxy S3 vs Otterbox Defender. They show the size difference also
http://smartphonepedia.com/galaxy-s3-otterbox-defender-vs-ballistic-case.html

I just picked up the regular SG case for my S3 and I am not really impressed. My biggest gripe is that there is no protection for the camera. I was wondering if the SG MAX or otterbox case provided these.
Also, the SG caused my SD card to mount and un-mount very rapidly. Not sure what was happening there. The SG case is also causing my ArmorSuit skin to peel around the edges.
My experience with the S3 has been less than ideal.

The silicone feels very cheap on this case and that screen protector is the dumbest thing ive ever seen. And you do have the ballistic maxx the person who was posting on your youtube video dosent realize when ballistic says 5 layers of protection there including both the holster and screen protector
Sent from my SPH-L710 using xda app-developers app

bmoreboy02 said:
The silicone feels very cheap on this case and that screen protector is the dumbest thing ive ever seen. And you do have the ballistic maxx the person who was posting on your youtube video dosent realize when ballistic says 5 layers of protection there including both the holster and screen protector
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I figured they were counting anything they could as a layer. That person is on XDA. They just wouldn't stop arguing so thanks. I'm glad Ballistic didn't donate this product because I had to tell the truth!

Question Pre-ordered Fold 4. No Aramid cover?!

I loved the Aramid case/cover from the Fold 3. Doesn't look like Samsung are offering it (yet?) for the ZF4? Anyone found a solid alternative yet? I know the Latercase can be pre-ordered but it's at least a month out for delivery.

I couldn't find either so pre ordered the later case, ill just grab a ringke or spigen from Amazon to have if the latercase shows up late.

There is one on Amazon that I am considering, but not from Sammy. It is also kind of pricey!

I see there's a "GooseBox" carbon cover on Amazon now. Hmmmm.

Had the Aramid on my Fold 3 since launch and love it. Other than Latercase I've only found a decent collection on AliExpress and some of those shipping times aren't so great.

I have the latercase and the samsung one for my fold 3 but mostly keep the latercase on it. Just seems to feel better in hand and i like the weave better

The latercase drops the teardrop cutout around the flash LED, finally! It's pricey and by the time it ships (it's at LEAST FOUR WEEKS out!) the cheaper alternatives will show up on Amazon. i.e. Timecat

Only positive reviews about the case and store from Fold3 users. So I ordered this...
https://www.aliexpress.com/item/1005001731526719.html

just ordered this one
Spigen Air Skin Back Cover Case for Samsung Galaxy Z Fold 4 (Poly Carbonate | Black) : Amazon.in: Electronics
Spigen Air Skin Back Cover Case for Samsung Galaxy Z Fold 4 (Poly Carbonate | Black) : Amazon.in: Electronics
www.amazon.in
last year i had spigen slim armour pro, that thing is fat and same wight as phone itself, phone weight almost .5kg along with case. my wife some times used it as dumbell
anyway fingers crossed and hope the case wont be broken in first drop
all the offical covers video

eswar539 said:
just ordered this one
Spigen Air Skin Back Cover Case for Samsung Galaxy Z Fold 4 (Poly Carbonate | Black) : Amazon.in: Electronics
Spigen Air Skin Back Cover Case for Samsung Galaxy Z Fold 4 (Poly Carbonate | Black) : Amazon.in: Electronics
www.amazon.in
Click to expand...
Click to collapse
Me too

Thanks for the video, ordered a white Silicone Grip Cover coming this Sunday.

Has anyone found a decent carbon case? cannot believe there not releasing a aramid case, had it for all my folds. All the official samsumg cases are terrible, bought a spidgen air and that's no good either,

just found this one, have several good reviews for fold 3 version. this is same samsung armid version
cyberz said:
Me too
Click to expand...
Click to collapse
spigen air case have too many bad reviews for fold 3 as they are not made of space craft material or vibranium! they tend to break easily, at least the front end
wish latercase or armid case was available in india. i hated the spigen slim FAT case

https://latercase.com/products/galaxy-z-fold-4-thin-case might be worth a look?

the_ape said:
https://latercase.com/products/galaxy-z-fold-4-thin-case might be worth a look?
Click to expand...
Click to collapse
costing around 60$ including shipping to india. does anyone have a coupon code?

Cheapest aramid for Fold 4, about 3-4 weeks shipping.
https://www.aliexpress.com/item/3256804308202707.html?spm=a2g0o.detail.0.0.5a9d58ea3BC7aB&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.300834.0&scm_id=1007.13339.300834.0&scm-url=1007.13339.300834.0&pvid=bc7b4485-70d7-40a2-929c-0e0aecac51e7&_t=gps-id:pcDetailBottomMoreThisSeller,scm-url:1007.13339.300834.0,pvid:bc7b4485-70d7-40a2-929c-0e0aecac51e7,tpp_buckets:668%232846%238111%231996&pdp_ext_f=%7B%22sku_id%22%3A%2212000029356395369%22%2C%22sceneId%22%3A%223339%22%7D&pdp_npi=2%40dis%21USD%2127.69%2116.89%2115.23%21%21%21%21%402101d1b916610069944842037eaffb%2112000029356395369%21rec
I like the closer cutout of the Latercase. I suspect those will be available in the Chinese channels shortly as well.

maka12 said:
Has anyone found a decent carbon case? cannot believe there not releasing a aramid case, had it for all my folds. All the official samsumg cases are terrible, bought a spidgen air and that's no good either,
Click to expand...
Click to collapse
I hate the Samsung cases....they make the phone look terrible imho, I got the aramid case from Amazon next day delivery and it's amazing:
CENMASO Aramid Fiber Case for Samsung Galaxy Z Fold 4, Galaxy Fold 4 Case Real Aramid Fiber Slim and Super Light Shockproof Protective Case for Z Fold 4 5G-Matte Black https://amzn.eu/d/1k7gTiG

ruffnexx_uk said:
I hate the Samsung cases....they make the phone look terrible imho, I got the aramid case from Amazon next day delivery and it's amazing:
CENMASO Aramid Fiber Case for Samsung Galaxy Z Fold 4, Galaxy Fold 4 Case Real Aramid Fiber Slim and Super Light Shockproof Protective Case for Z Fold 4 5G-Matte Black https://amzn.eu/d/1k7gTiG
Click to expand...
Click to collapse
Nice, we don't have that case yet for Canada....

cpufrost said:
Cheapest aramid for Fold 4, about 3-4 weeks shipping.
https://www.aliexpress.com/item/3256804308202707.html?spm=a2g0o.detail.0.0.5a9d58ea3BC7aB&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.300834.0&scm_id=1007.13339.300834.0&scm-url=1007.13339.300834.0&pvid=bc7b4485-70d7-40a2-929c-0e0aecac51e7&_t=gps-id:pcDetailBottomMoreThisSeller,scm-url:1007.13339.300834.0,pvid:bc7b4485-70d7-40a2-929c-0e0aecac51e7,tpp_buckets:668%232846%238111%231996&pdp_ext_f=%7B%22sku_id%22%3A%2212000029356395369%22%2C%22sceneId%22%3A%223339%22%7D&pdp_npi=2%40dis%21USD%2127.69%2116.89%2115.23%21%21%21%21%402101d1b916610069944842037eaffb%2112000029356395369%21rec
I like the closer cutout of the Latercase. I suspect those will be available in the Chinese channels shortly as well.
Click to expand...
Click to collapse
aliexpress is banned in india. if not i would have bought it
i dont understand why dont spigen make armid cases. they would sell a truck load of those instead of that fat 100$ case they make

eswar539 said:
aliexpress is banned in india. if not i would have bought it
i dont understand why dont spigen make armid cases. they would sell a truck load of those instead of that fat 100$ case they make
Click to expand...
Click to collapse
That is unfortunate.
Latercase ships to India.
Galaxy Z Fold 4 Case (Cyber Edition)
Latercase for the Z Fold 4 is easy to put on, easy to take off, and coated with a textured matte finish that feels as good as it looks. Every Latercase is made with Dupont™ Kevlar®. The aramid fibers are precision-formed to fit your Z Fold 4, then laser-cut to perfection. Oh - and it's just...
latercase.com