Hi,
My Motorola One Action is original (so no custom firmware or rooted) and every now and then i receive auto updates. Recently the phone was upgraded to Android 11. Fine.
Last weekend there was an update and in the morning the phone was stuck on Android bootloader with the question "format" or "retry" (cannot remember exactly, but it was 2 questions) and i chose "retry". The device rebooted; android logo showed up and then the google/android assistant showed up with the notification "Hello" and a lanuage selector.
I choose NL or EN and then a white screen with "Just a sec..." appears and this screen will stay there forever. I put the phone on charger and waited 30 hours, still the same.
What i tried:
- reboot;
- press & hold power button long time; reboot;
- turn off and then volume Down + Power key bootloader. There isnt much i can do here;
- from screen above; go to fastboot mode (volume Up + power) but unfortunately there is no whipe cache option; only whipe data / factory reset.
FYI: there are still a lot of photo's on the device; i dont want a factory reset and/or whipe data.
I put device in bootloader mode again, connect with usb and installed "Rescue and Smart Assistant". The device recognized, IMEI is found and more stuff. In this Windows app i can download the correct firmware; i store it in c:/motorola/firware. The file is troika_reteu_rsbs31.q1-48-36-23-2_subsidy-default_regulatory-default_cfc.xml.zip
The the "Start Rescue" button is shown; but the message "Flashing removes all data from device".
I dont want that so i followed this guide:
The conversion went OK and executed the file generated (.bat), immediately a upload process starts; this takes about 5-6 minutes. After that; a device reboot and still... the same result.
Any tips or advice would be very helpful (i hope).
I found this; looks promising
Moto One Action FRP Bypass Android 11 2022 Google unlock XT2013
How to bypass Google Account Verification - FRP lock on Motorola One Action Android 11 2021 2022 without computer XT2013 Amazon Prime & Factory Unlocked
lgstylo3plus.com
But unfortunately the image browser does not respond.
I have contacted Motorola / Lenovo using their forum. In short their answer is that for almost sure the only way is to completely reset the device that means whiping data.
Is there absolutely no way to access the data partition?
I used ADB to flash a newer and older version of android.
Both version gave a error message directly when phone powered on.
Then i re-installed the current version of android; phone worked again. Unfortunately all data lost.
Related
Hi everyone,
First of all, i've read some posts about similar issues but i couldn't find one that exactly matched mine.
My phone was working perfectly last night, but today when i got up it was turned off.
I imagined that the battery had drained during the night, so i plugged it to the charger and after a while i turned the phone on.
It started alright but then it got stuck on the Samsung logo. It should then go to the "PIN code" screen but instead just stays there.
The Power+Home+Volume Up combination shows me the recovery mode menu with the android lying on his back and with a triangular red exclamation sign. Below there is a message saying "no command". The following options are allowed:
- reeboot system now;
- apply update from ADB;
- apply update from external storage;
- wipe data/factory reset;
- wipe cache partition;
- apply update from cache;
The Power+Home+Volume Down combination shows me the Update/download menu and it allows me to cancel or go to download mode.
My phone is not rooted, everything is original or updated as sugested/requested by the phone.
I haven't installed any new apps yesterday.
So my questions are:
1 - Can I fix this without deleting all of my data from the internal memory, or can still backup my data?
2 - How can I fix this?
Please take into consideration that i am a complete stranger to the "developer's technical language".
Thanks in advance
Hi forum,
I have just reset my HTC One M9 back to factory settings and now when it starts it immediately gives me Google Play errors and will not boot. The errors repeatedly show on the screen and it will not boot normally rendering the phone useless. The messages I am getting are:
1: Unfortunately, Google Play services has stopped
2. Unfortunatley, the process com.google.process.gapps has stopped
I click OK and they just keep coming over and over.
I can't get onto the phone to change settings and would just like it to work again. I am not bothered about custom ROMS, just want it working however I can.
Can anyone point me in the right direction, please?
Thanks for your help.
J
HTCjaystroke said:
Hi forum,
I have just reset my HTC One M9 back to factory settings and now when it starts it immediately gives me Google Play errors and will not boot. The errors repeatedly show on the screen and it will not boot normally rendering the phone useless. The messages I am getting are:
1: Unfortunately, Google Play services has stopped
2. Unfortunatley, the process com.google.process.gapps has stopped
I click OK and they just keep coming over and over.
I can't get onto the phone to change settings and would just like it to work again. I am not bothered about custom ROMS, just want it working however I can.
Can anyone point me in the right direction, please?
Thanks for your help.
J
Click to expand...
Click to collapse
You can try starting your phone in safe mode by holding the vol down button when the HTC logo shows when you start up. *release power key and start pressing vol down when htc logo shows*
See if you can start properly with Safe Mode and if anything can be updated there. If it doesn't work, just wipe the phone once more using recovery mode and see if it works. If it fails again even after another wipe, you have to install the RUU for your phone again using the SD card method in the Readme thread.
hi,
shut down your phone
boot into bootloader mode - select boot to recovery
"WARNING - ALL DATA WILL BE LOST"
Next select from Recovery Mode menu "wipe data / factory reset" using Volume buttons to navigate and Power button to confirm.
Choose "Yes -- delete all user data" to confirm the whole operation.
After that select option "reboot system now".
[HELP] "Android system has sttoped working" loop 2 seconds, unable to use screen.
Hello,
Lg g3 (Telefónica / Movistar branded Spanish carrier)
Bought in Jul 2014.
Weeks having reset problems, one day, on a reset, got the msg "Android system stopped working", close, 2 seconds, again same msg, I can't use ths screen to avoid it, just to close the msg window, neither to browse options in those 2 seconds in each loop. I can only use the turn on/off buton, so, when I reset, same stuff again..
I tried to use Recovery Mode (vol-) and I just get the option to restore and WIPE ALL INFO (even files, pics, etc..)... no more options
Tried Lg Suite + Download mode (I can enter in download mode) but the software don't recognice the device.... using original cable,
I need the stuff inside, don't care about the phone thou, will get a new one, but I really need the info inside (no SD, the info inside the internal storage).
Any help?
If you turn off the device, hold down power and volume down. Release them when the lg logo shows then immediately press them again you should get to a factory reset screen. Try performing a factory reset, this will not wipe your files, just all apps and app data
Hi,
thanks for the answer.
that was my first hint, but, as you can see ( imgur.com/ d31OXJi) that menu option says "Delete all user data (including LG and carrier apps) and reset all settings?"..
I do belive this is warning me about wipe all my data including pics, videos, contacts, etc...
Are you 100% sure that wthis will not wipe the entire information?¿
Thanks...
BUMP!
Can anyone help me or confirm us if I do the vol down restart to factory will wipe my pics away??
Thanks...
Really? Noone ever have restored the phone using this option on a g3 to know if the pics will be deleted or not? amazing...
Posting from following original reference:
https://productforums.google.com/forum/#!topic/nexus/yMUh6a2SVLs;context-place=forum/nexus
I've had a Nexus 5x for a couple of years and recall accepting an Android update about a week ago, since which time I've restarted my phone several times. Unfortunately, I can't tell you the Android version because I'm currently unable to get past my lock screen.
Yesterday I restarted my phone and went through the steps of password => Android loading => fingerprint to unlock screen, but I also received the message "password required after device restarts" so I entered my password again. I know the password is correct because it works initially (to start Android) and because if I type anything different, it tells me that the password is wrong. However, each time I enter the correct password, the screen goes black for a second (which it would normally do when unlocking the screen) but then it returns to the "password required after device restarts" prompt.
I've tried powering off, restarting and 'hard' restarting by pressing down the power button, but the result is the same each time I reach the step to unlock the screen.
I can see alerts (eg, emails, whatsapp messages) and I receive visual/audio notification of calls/messages, etc. but I can't access the content.
My last backup was about four weeks ago before I began international travel. There are important data on my phone that I need to get access to hence following questions:
1) Since the password is still valid is there a way one can Remote Desktop into the phone and retrieve the data?
2) Any other way to get into the phone?
Any help in this matter is highly appreciated.
Thanks and Happy new year 2018.
Model: SM-S908U1 Unlocked
Hello so to start off I want to say this is entirely my fault for not backing up my phone before installing this beta.
Story:
So today I tried to create a secure folder and while it was creating the secure folder my phone shut down after rebooting I cannot get into my phone every time I enter the password it just freezes and reboots. I can see my data is still all there because I am still receiving app notifications. How would I go about fixing this as I cannot factory wipe the phone because of fear of loosing my accounts tied to 2fa.
What I have tried so far:
- Using Samsung's find my phone feature to remove the screen lock (The phone randomly reboots multiple times and the screen lock is not removed.)
- Wiping system cache
- ADB does not detect the device as it is locked so there is not much I can do with that.
Other notes:
I have used oden in the past but I cannot find the right software for my model to attempt to re flash. (SM-S908U1 Unlocked)