Team Win Recovery Project 3.2.3-0
This is for the Exynos SM-J710F, SM-J710FN, SM-J710GN, SM-J710MN, SM-J710K models only!
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DOWNLOAD
Build 3 3.2.3-0
Older builds:
Build 2 3.2.3-0
I highly recommend using Odin to flash when possible.
You can find a zip containing Odin as well as a link to Samsung's Mobile drivers page here:
https://odindownload.com/
FULL STEPS FOR ROOTING
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
Extract Odin_(version).zip to your computer.
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for j7xelte.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can pull the battery then place the battery back in. Now hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
If you want to be rooted with Magisk:
Download the latest Magisk.
Without exiting TWRP, transfer the Magisk zip to your device over MTP* and flash it using [Install] in TWRP.
Go to [Reboot] -> [System].
* MTP, known as Media Transfer Protocol, is the same way you transfer files from your PC to your device when booted into system.
KNOWN ISSUES
You need to wipe Data when on stock ROM
Changelog
Build 1: Initial release
Build 2: Update to M10 kernel and android-8.1 source (from android-6.0)
Build 3: Fix MTP problems and /vendor (invalid argument) + upstreamed M10 kernel to 3.18.134 with google recommended changes to kernel
NOTE: If you're on stock Oreo rom always make sure your system is read only. Don't let it be r/w
SOURCE CODE:
TWRP (android-9.0)
Device tree (android-8.1)
Kernel: (pie)
why is not on the official web?
idk this seems pretty sketchy
M4T145 said:
why is not on the official web?
idk this seems pretty sketchy
Click to expand...
Click to collapse
I can't instantly get official i can upload pictures btw
Is it support Android 8.1.0 Firmware?
TRalperenTR said:
Is it support Android 8.1.0 Firmware?
Click to expand...
Click to collapse
Yes but make sure you leave system read only and flash magisk instantly to fix dm verify
Thanks man. It's worked! Every features is working. But why does it say E: on the console? I didn't understand.
TRalperenTR said:
Thanks man. It's worked! Every features is working. But why does it say E: on the console? I didn't understand.
Click to expand...
Click to collapse
I don't know. Its a twrp bug maybe. Also download it again i built it using the M10 kernel now but it also says /vendor invalid argument
...
It is working fine checked it
This TWRP doesn't install Oxygen Kernel. It says "Recovery Busybox Setup Failed."
I have already installed official twrp from website do i have to reinstall fresh on just download a zip for flash without installing magisk plus kindly upload a video for step by step process.
By the way a quick question is kernel 3.18.135 is latest or 3.18.14
Sulltan Mehmood said:
I have already installed official twrp from website do i have to reinstall fresh on just download a zip for flash without installing magisk plus kindly upload a video for step by step process.
By the way a quick question is kernel 3.18.135 is latest or 3.18.14
Click to expand...
Click to collapse
3.18.135 newer then 3.18.14
If you have other twrp extract the .tar archive and move .img to phone and goto Install on twrp select Install Image and Click on it. Select recovery and swipe to confirm. Done
Hi, the link of the latest build is down, can you re-upload please?
I saw in other tutorials that when in stock 8.1 rom you need to erase all data from internal memory. If i do this, there is no longer a, /system folder so there is no rom and bootloop happens.
Do i need to do factory wipe instead? I know i have to wipe data because Its encripted and twrp cant access internal memory.
Im asking what kind of "wipe data" i need to do
just format data to decrypt
link please
bro it says download file does not exist on google drive
download link ??
https://drive.google.com/open?id=1Xq4TAkcs9plY3zfGHiall21a3GgjdgHS
---------- Post added at 17:28 ---------- Previous post was at 17:28 ----------
saquib996 said:
bro it says download file does not exist on google drive
Click to expand...
Click to collapse
Ofogh said:
download link ??
Click to expand...
Click to collapse
https://drive.google.com/open?id=1Xq4TAkcs9plY3zfGHiall21a3GgjdgHS
UPDATE
Flash at your own Risk !!!
Tested Working:
Backup
Flash zip
Fastbootd support
Flash gsi roms
Not Working:
Usb Otg
You tell me
How to Flash on Android 11
1. Reboot Device to Downloadmode
2. Unlock Bootloader
3. Install adb and Fastboot driver and Device Drivers ( Google will Help )
4. Download the VBMeta-disabled.tar and the twrpa22v3.tar from Attachments
5. Download Odin3 from Attachments and start Odin on PC
6. In Odin Press on Options and untick Auto Reboot
7. Flash VBMeta-disabled.tar with Odin ( In Odin click on AP - select the vbmeta-disabled.tar and press start )
8. After flash vbmeta without errors press on AP and select twrpa22v3.tar and press on start
9. If all is Flashed without errors longpress power and vol- on device
10. instantly after device goes Blackscreen press and hold power and vol+ for 5-8 seconds to boot to TWRP
11. In TWRP press on Advanced - than on Terminal - and write " multidisabler " and press on the blue button
12. repeat step 11
13. press on reboot - than on recovery
How to Flash on Android 12
1. Reboot Device to Downloadmode
2. Unlock Bootloader
3. Install adb and Fastboot driver and Device Drivers ( Google will Help )
4. Download the magisk patched.tar and the twrp12.1_a225f-A12.tar from Attachments
5. Download Odin3 from Attachments and start Odin on PC
6. In Odin Press on Options and untick Auto Reboot
7. Flash magisk patched.tar with Odin ( In Odin click on AP - select the magisk patched.tar and press start )
8. After flash magisk patched.tar without errors press on try to reboot download -device reboots to dl mode
9. Flash twrp12.1_a225f-A12.tar with Odin ( In Odin click on AP - select the twrp12.1_a225f-A12.tar and press start )
10. If all is Flashed without errors longpress power and vol- on device
11. instantly after device goes Blackscreen press and hold power and vol+ for 5-8 seconds to boot to TWRP
12. In TWRP press on Advanced - than on Terminal - and write " multidisabler " and press on the blue button
13. repeat step 12
14. press on reboot - than on recovery
How to flash gsi:
Use the google platform tools adb/fastboot Download from Attachments
Boot to TWRP
1. In TWRP press Wipe-Advanced Wipe- select Dalvik, data, cache, metadata and swipe to wipe
2. After wipe go back to main screen and press Reboot- than press Fastboot
3. Device reboots to TWRP with Fastboot Interface
4. now plugin Device to PC open platform tools and execute cmd-here.exe
5. Type : fastboot devices - if no output check your Drivers/Usb connection
6. If device is Found by "fastboot devices" command enter " fastboot flash system PATHTOYOURGSI.img"
maybe it writes :Invalid sparse file format at header magic - but this can be ignored
After flash completed without errors type : fastboot reboot and press enter
GSI Download (Tested and bootable ) :
Only Arm64-BGZ Variants are bootable
( BTW gsi imgs with .xz File Format must be extracted ! Don't simple rename it to .img )
CrDroid 11 (Face-unlock and Fingerprint works)
android 12
Bliss 11
caos11
Credits:
afaneh92 For the a32x Devicetree
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KI
Device Tree base used : https://github.com/mohammad92/android_device_samsung_a32x
A22 4g A11 Tree :https://github.com/deader89/galaxy-A22-4g-twrp-Tree
A22 4g A12 Tree :https://github.com/deader89/a22_TWRP12.1_tree.git
Thanks. Will test this.
I'm in the process of wiping through TWRP. It says
"Failed to mound '/metadata' (Invalid argument)
I've already converted the format partition from FAT to EXT4, and wiped the selected items but I'm stuck with the error above. Idk if this won't make me able to proceed to flashing the gsi
nice. Wish there were clear instructions on how to flash this phone, though.
nptoonix said:
Thanks. Will test this.
I'm in the process of wiping through TWRP. It says
"Failed to mound '/metadata' (Invalid argument)
I've already converted the format partition from FAT to EXT4, and wiped the selected items but I'm stuck with the error above. Idk if this won't make me able to proceed to flashing the gsi
Click to expand...
Click to collapse
did you run the multidisabler ?
Cheese-ass said:
WIP WIP WIP WIP
UPDATE
Flash at your own Risk !!!
Tested Working:
Backup
Flash zip
Fastbootd support
Flash gsi roms
Not Working:
Usb Otg
You tell me
how i Flashed it:
Flash this VBMeta with Odin - https://forum.xda-developers.com/t/...-galaxy-a32-5g-mediatek.4286631/post-85593097
Follow this Guide: https://forum.xda-developers.com/t/recovery-unofficial-twrp-for-galaxy-a32-5g-mediatek.4286631/ but use twrpa22v2.tar added under Attachments
How to flash gsi:
use the google platform tools adb/fastboot
Boot to TWRP
In TWRP press Wipe-Advanced Wipe- select Dalvik,data,cache,metadata and swipe to wipe
after wipe go back to main screen and press Reboot-Fastboot
Device reboots to TWRP with Fastboot Interface
now plugin Device to PC open platformtools adb/Fastboot
Type : fastboot flash system PATHTOYOURGSI.img and press enter
maybe it writes :Invalid sparse file format at header magic - but this can be ignored
After flash completed type : fastboot reboot
GSI Download (Tested and bootable ) :
CrDroid 11 (Face-unlock and Fingerprint works)
android 12
Bliss 11
caos11
Credits:
afaneh92 For the a32x Devicetree
View attachment 5409225View attachment 5409227View attachment 5409229
Device Tree base used : https://github.com/mohammad92/android_device_samsung_a32x
Kernelbase is same as my custom Kernel: https://forum.xda-developers.com/t/root-galaxy-a22-sm-a255f--android-11.4329471/
Click to expand...
Click to collapse
Hey, so I really want to root my A22, but I would want some more info. I would like more info on how to flash the A12 GSI, like what about vendor etc, I mean I know stuff about roms but no stuff about GSI'S whatsoever, so like is vendor needed etc? And also can you give me a more detailed tutorial on how to flash it? I'd love Android 12 on this phone.
BlueTower said:
Hey, so I really want to root my A22, but I would want some more info. I would like more info on how to flash the A12 GSI, like what about vendor etc, I mean I know stuff about roms but no stuff about GSI'S whatsoever, so like is vendor needed etc? And also can you give me a more detailed tutorial on how to flash it? I'd love Android 12 on this phone.
Click to expand...
Click to collapse
Generic system images | Android Open Source Project
source.android.com
There you find everything about gsi
Cheese-ass said:
Generic system images | Android Open Source Project
source.android.com
There you find everything about gsi
Click to expand...
Click to collapse
No, I just wanted a better tutorial on hiw to install it with twrp or fastboot or whatevrr
BlueTower said:
No, I just wanted a better tutorial on hiw to install it with twrp or fastboot or whatevrr
Click to expand...
Click to collapse
BlueTower said:
No, I just wanted a better tutorial on hiw to install it with twrp or fastboot or whatevrr
Click to expand...
Click to collapse
How to flash GSIs on devices with dynamic super partition
* Disclaimer * I am not responsible for bricked devices, dead SD cards, thermonuclear war, * or you getting fired because the alarm app failed. Please do some research * before flashing GSI! YOU are choosing to make these modifications, and if *...
forum.xda-developers.com
Can you write a rookie-level tutorial?
As confusing as it sounds it literally is what it is.
BlueTower said:
As confusing as it sounds it literally is what it is.
Click to expand...
Click to collapse
I have been thinking of buying an a22.
Have you got TWRP to install ok?
physwizz said:
I have been thinking of buying an a22.
Have you got TWRP to install ok?
Click to expand...
Click to collapse
Yepp... perfectly works. No issues, efs just might break sometimes like it already did to me and you have to flash stock if you didn't back up efs
BlueTower said:
Yepp... perfectly works. No issues, efs just might break sometimes like it already did to me and you have to flash stock if you didn't back up efs
Click to expand...
Click to collapse
Ok
I might see if I can build a custom kernel for it
Cheese-ass said:
UPDATE
Flash at your own Risk !!!
Tested Working:
Backup
Flash zip
Fastbootd support
Flash gsi roms
Not Working:
Usb Otg
You tell me
How to Flash:
1. Reboot Device to Downloadmode
2. Unlock Bootloader
3. Install adb and Fastboot driver and Device Drivers ( Google will Help )
4. Download the VBMeta-disabled.tar and the twrpa22v3.tar from Attachments
5. Download Odin3 from Attachments and start Odin on PC
6. In Odin Press on Options and untick Auto Reboot
7. Flash VBMeta-disabled.tar with Odin ( In Odin click on AP - select the vbmeta-disabled.tar and press start )
8. After flash vbmeta without errors press on AP and select twrpa22v3.tar and press on start
9. If all is Flashed without errors longpress power and vol- on device
10. instantly after device goes Blackscreen press and hold power and vol+ for 5-8 seconds to boot to TWRP
11. In TWRP press on Advanced - than on Terminal - and write " multidisabler " and press on the blue button
12. repeat step 11
13. press on reboot - than on recovery
How to flash gsi:
Use the google platform tools adb/fastboot Download from Attachments
Boot to TWRP
1. In TWRP press Wipe-Advanced Wipe- select Dalvik, data, cache, metadata and swipe to wipe
2. After wipe go back to main screen and press Reboot- than press Fastboot
3. Device reboots to TWRP with Fastboot Interface
4. now plugin Device to PC open platform tools and execute cmd-here.exe
5. Type : fastboot devices - if no output check your Drivers/Usb connection
6. If device is Found by "fastboot devices" command enter " fastboot flash system PATHTOYOURGSI.img"
maybe it writes :Invalid sparse file format at header magic - but this can be ignored
After flash completed without errors type : fastboot reboot and press enter
GSI Download (Tested and bootable ) :
Only Arm64-BGZ Variants are bootable
( BTW gsi imgs with .xz File Format must be extracted ! Don't simple rename it to .img )
CrDroid 11 (Face-unlock and Fingerprint works)
android 12
Bliss 11
caos11
Credits:
afaneh92 For the a32x Devicetree
View attachment 5409225View attachment 5409227View attachment 5409229
Device Tree base used : https://github.com/mohammad92/android_device_samsung_a32x
Kernelbase is same as my custom Kernel: https://forum.xda-developers.com/t/root-galaxy-a22-sm-a255f--android-11.4329471/
Click to expand...
Click to collapse
Hi there, I'm a noob regarding to this, but I was able to follow this guide successfully for my A225m.
But I'd like to understand what's going on here, can you give an explanation about each step and what does it do?
Also, can the vbmeta flashing be done _without_ Odin? For example using only fastboot (which works on Linux unlike Odin).
itaranto said:
Hi there, I'm a noob regarding to this, but I was able to follow this guide successfully for my A225m.
But I'd like to understand what's going on here, can you give an explanation about each step and what does it do?
Also, can the vbmeta flashing be done _without_ Odin? For example using only fastboot (which works on Linux unlike Odin).
Click to expand...
Click to collapse
https://android.googlesource.com/platform/external/avb/+/master/README.md this is documentation about vbmeta
i think it cant be flashed without odin before twrp is installed
Cheese-ass said:
Not Working:
Usb Otg
You tell me
Click to expand...
Click to collapse
I've been using this for a while in my A225M and the Ambient Light/Proximity sensor doesn't work.
itaranto said:
I've been using this for a while in my A225M and the Ambient Light/Proximity sensor doesn't work.
Click to expand...
Click to collapse
twrp wouldn't cause that
physwizz said:
twrp wouldn't cause that
Click to expand...
Click to collapse
I know, should I report this to https://github.com/eremitein/treble-patches ?
Thank you for following your tutorial, successfully rooting, and flashing the system
There are three problems with crdroid, the dual card manager cannot work quickly, the hotspot cannot be used, and the system cannot mount the phone storage
mintOS Based LineageOS disturabiton with extra optimize
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Hello! Last week i builded Mint2 for J7 2017(Pro).. and it successfuly booted, and i want to share it
Spoiler: Bugs
Wi-Fi And HotSpot
Spoiler: Notes
Gapps Not included.
Spoiler: How To Flash?
MintOS needs custom recovery for flash, if you have skip to step 5.
Step1: enable developer options;
Go to settings>device info> software information and click build number 7 times.
Step 2: enable USB-Debugging & USB Debugging
Go to developer options and enable USB-Debugging And OEM Unlock
Step 3: reboot your phone to download mode.
Shut down your phone and press power + volume down + home button same button and wait download mode confirmation screen if it here, accept it.
Step 4: flash TWRP
Download Odin to your computer and connect your phone using usb-cable, and select your TWRP file and flash using AP option (don't forgot the disable auto-reboot option)
Step 5: Flash Repartition Script.
NOTE: THAT ERASES YOUR ALL DATA (APPS, FILES, CONTACTS ETC.) Flash OrangeFox Recovery for use repartition script
Download repartition script from Here
Step 6: Fix partitions
Go to manage partitions settings on orangefox recovery and change file system first ext2 after ext4
Step 7: flash MintOS
Click folder icon on orangefox and select Downloaded MintOS file and confirm flash
Step 8: reboot and done
After finish flash, reboot your phone and complete the setup.
Download: Here
Screenshots: Here
Screenshots Part 2:Here
Sources:
ROM: https://github.com/MintOS-Revived/
Kernel: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/
ROM OS Version: Android 10
ROM Kernel: Linux 3.18
Thanks for the hard work
Bug 1 : I can't connect to a wifi network and it takes a long time to find the wifi networks
Bug 2 : Wifi Hotspot not working at all
Any solution ?
Thanks in advance
Munir.jacob90 said:
Thanks for the hard work
Bug 1 : I can't connect to a wifi network and it takes a long time to find the wifi networks
Bug 2 : Wifi Hotspot not working at all
Any solution ?
Thanks in advance
Click to expand...
Click to collapse
Thanks For Report, i think wifi only works on J730F, if you can share logcat i can help you. I will back to mint again today i will test hotspot, adding bugs to post
HI.... so what do i have to change in file system (step 6)? I'm a bit confused and when i tried to wipe it keeps saying, not mounted. Like for everything, data, cache. Please help me out
Unity games support?
selinux support?
Note: Updateable Post
Note 2: Just Builds made by Batuhantrkgl added. check XDA for others
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Spoiler: How To Flash?
LineageOS needs custom recovery for flash, if you have skip to step 5.
Step1: enable developer options;
Go to settings>device info> software information and click build number 7 times.
Step 2: enable USB-Debugging & USB Debugging
Go to developer options and enable USB-Debugging And OEM Unlock
Step 3: reboot your phone to download mode.
Shut down your phone and press power + volume down + home button same button and wait download mode confirmation screen if it here, accept it.
Step 4: flash TWRP
Download Odin to your computer and connect your phone using usb-cable, and select your TWRP file and flash using AP option (don't forgot the disable auto-reboot option)
Step 5: Flash Repartition Script.
NOTE: THAT ERASES YOUR ALL DATA (APPS, FILES, CONTACTS ETC.) Flash OrangeFox Recovery for use repartition script
Download repartition script from Here
Step 6: Fix partitions
Go to manage partitions settings on orangefox recovery and change file system first ext2 after ext4
Step 7: flash LineageOS
Click folder icon on orangefox and select Downloaded LineageOS file and confirm flash
Step 8: reboot and done
After finish flash, reboot your phone and complete the setup.
Rom List (Links goes to Telegram):
Project Sakura Android 10 [UNOFFICAL]
MintOS Android 10 [UNOFFICAl]
Arrow 10 [UNOFFICAL]
Lightning Fast ROM-17.1 (Android 10) [OFFICAL]
POSP v3.2.2+18 (Android 10) [UNOFFICAL]
Pixel Experince Android 10 [UNOFFICAL]
KeepQassa v2.1 (Android 10) [OFFICAL]
AOSIP Android 10 [UNOFFICAL]
AlrightOS v0.2 (Android 10) [OFFICAL]
AlrightOS v0.4 (Android 10) [OFFICAL]
Thanks:
Gonic and Astrako For Trees.
Ken Mosq for Server
Sources:
Kernel: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/
ROM OS Version: Android 10
ROM Kernel: Linux 3.18
Note: Updateable Post
Note 2: Just Builds made by Batuhantrkgl added. check XDA for others
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Spoiler: How To Flash?
LineageOS needs custom recovery for flash, if you have skip to step 5.
Step1: enable developer options;
Go to settings>device info> software information and click build number 7 times.
Step 2: enable USB-Debugging & USB Debugging
Go to developer options and enable USB-Debugging And OEM Unlock
Step 3: reboot your phone to download mode.
Shut down your phone and press power + volume down + home button same button and wait download mode confirmation screen if it here, accept it.
Step 4: flash TWRP
Download Odin to your computer and connect your phone using usb-cable, and select your TWRP file and flash using AP option (don't forgot the disable auto-reboot option)
Step 5: Flash Repartition Script.
NOTE: THAT ERASES YOUR ALL DATA (APPS, FILES, CONTACTS ETC.) Flash OrangeFox Recovery for use repartition script
Download repartition script from Here
Step 6: Fix partitions
Go to manage partitions settings on orangefox recovery and change file system first ext2 after ext4
Step 7: flash LineageOS
Click folder icon on orangefox and select Downloaded LineageOS file and confirm flash
Step 8: reboot and done
After finish flash, reboot your phone and complete the setup.
Rom List (Links goes to Telegram):
Project Sakura Android 10 [UNOFFICAL]
MintOS Android 10 [UNOFFICAl]
Arrow 10 [UNOFFICAL]
Lightning Fast ROM-17.1 (Android 10) [OFFICAL]
POSP v3.2.2+18 (Android 10) [UNOFFICAL]
Pixel Experince Android 10 [UNOFFICAL]
KeepQassa v2.1 (Android 10) [OFFICAL]
AOSIP Android 10 [UNOFFICAL]
AlrightOS v0.2 (Android 10) [OFFICAL]
AlrightOS v0.4 (Android 10) [OFFICAL]
Thanks:
Gonic and Astrako For Trees.
Ken Mosq for Server
Sources:
Kernel: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/
ROM OS Version: Android 10
ROM Kernel: Linux 3.18