sir i have download update for my sgy. after download complete i have open it with winRAR in pc i got only 2 file in it, one is in *.tar.md5 formate and another one is in *.dll .now i have selected *.tar.md5 as pda in odin and click on start and its fail to install... then again i have done but it alaways show fail...for more information i google it for solution but i didnt get usefull info. someone said to rename it to .tar i have done that too...but unsuccessful...so i thought that this file may be currupted so again i have download another ddlc3 update for sgy. but unfortuntly this also contain same extension *.md5 i try this too but it is also showing fail... please help me... for kind information i alaways untick re-partation...before updating
post here http://forum.xda-developers.com/showthread.php?t=1600373
http://galaxyydroid.wordpress.com/2012/06/16/stock-rom-cwm-flashable-with-14-toggles-status-bar/ flaah stock rom via cwm recovery
Hope this help you, if u found this helpful den press Thanks
shailu1990 said:
sir i have download update for my sgy. after download complete i have open it with winRAR in pc i got only 2 file in it, one is in *.tar.md5 formate and another one is in *.dll .now i have selected *.tar.md5 as pda in odin and click on start and its fail to install... then again i have done but it alaways show fail...for more information i google it for solution but i didnt get usefull info. someone said to rename it to .tar i have done that too...but unsuccessful...so i thought that this file may be currupted so again i have download another ddlc3 update for sgy. but unfortuntly this also contain same extension *.md5 i try this too but it is also showing fail... please help me... for kind information i alaways untick re-partation...before updating
Click to expand...
Click to collapse
u downloaded the wrong zip.. try other ones
its single file not support flash using odin(galaxy y odin 1.84/1.85) .....................
convert it odin package(3 file) using doky73 great tool
[TOOL] SplitFUS -create your own Odin ready pack
or
find ur odin package hare
[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages
Hi,
I have downloaded the latest Basebandversion from this page: https://www.samdownloads.de/download/t805xxu1bpc4-dbt-5-0-2-germany/
But I cant install it over TWRP because it's a rar archive.
Included files:
boot.img
cache.img
hidden.img
modem.bin
recovery.img (can I left this? wanna install PAC-MAN Rom after this update over TWRP)
sboot.bin
system.img
I can extract them and install them step by step over TWRP but then I cant install the .bin-files I think. So how should I install this for my SM-T805?
Hope that anybody can help me with that so that I can use PAC-Man Rom with the lates included security patch lvl.
My actually system is the following:
OS-Version: 5.0.2
Baseband: T805XXU1BOD3
Kernel-Version: 3.4.110-IronKernel_V2.5.5_TW_T805 - some [email protected] notation
Build: IronRom V2.5 T805
Pls dont ask why I want to change my current rom. My prefered one is CM but therefor is only an unofficial 13.0 version with a few bugs and the 12.x won't work. So I decided to switch to
PAC-MAN ROM.
Sincerly
Chaos234
Odin.
ashyx said:
Odin.
Click to expand...
Click to collapse
Ok, and can u tell me which file goes in which line? It's not decsribed and can I input all files at the same time so that it can run as one process?
Chaos234 said:
Ok, and can u tell me which file goes in which line? It's not decsribed and can I input all files at the same time so that it can run as one process?
Click to expand...
Click to collapse
It's not a rar archive, it's a tar archive with an .md5 extension.
Put in AP slot and flash.
ashyx said:
It's not a rar archive, it's a tar archive with an .md5 extension.
Put in AP slot and flash.
Click to expand...
Click to collapse
Ok, then I must unzip it because my one is a rar archiv and in it there is a folder and in this folder there is the .tar.md5 with a password protection.
If this works (I know the password) can odin flush it?
Chaos234 said:
Ok, then I must unzip it because my one is a rar archiv and in it there is a folder and in this folder there is the .tar.md5 with a password protection.
If this works (I know the password) can odin flush it?
Click to expand...
Click to collapse
Yes like I said previously you need to flash the tar.md5 in the AP slot.
so i had an issue installing supersu on my sm-a520 and after searching everywhere for the proper firmware file i could only find firmware files in .lz4 format which odin3 would not flash to the device properly i then found a program that is free called classykitchen which allowed me to decompress the .lz4 files then create a system.new.dat file to flash via recovery so if you have run into this issue i recommend finding classykitchen and installing twrp via odin3 then download the firmware file from updato.com unzip that file then when your starting a new project in classykitchen make sure you put bl ap cp and home_csc all in the new project by highlighting all the files and make sure when its done extracting the lz4 files you select create system.new.dat once thats complete put that file to the sdcard wipe the device for a clean install and flash the file youve just created and bingo your phone will be back to stock other then the twrp recovery which i will say is the best recovery ive used in my mind there is no better.. now that ive explained that i'm gonna try installing supersu again and keep on keepin on have a good one
dirtdirte said:
so i had an issue installing supersu on my sm-a520 and after searching everywhere for the proper firmware file i could only find firmware files in .lz4 format which odin3 would not flash to the device properly i then found a program that is free called classykitchen which allowed me to decompress the .lz4 files then create a system.new.dat file to flash via recovery so if you have run into this issue i recommend finding classykitchen and installing twrp via odin3 then download the firmware file from updato.com unzip that file then when your starting a new project in classykitchen make sure you put bl ap cp and home_csc all in the new project by highlighting all the files and make sure when its done extracting the lz4 files you select create system.new.dat once thats complete put that file to the sdcard wipe the device for a clean install and flash the file youve just created and bingo your phone will be back to stock other then the twrp recovery which i will say is the best recovery ive used in my mind there is no better.. now that ive explained that i'm gonna try installing supersu again and keep on keepin on have a good one
Click to expand...
Click to collapse
You shouldn't be installing SuperSU on newer versions of Android. Use magisk instead. Then you shouldn't have problems.
BeyondRom V5.8
Based on Android 9.0 - G975FXXU3ASK1
Devices Supported: G973F(D), G975F(D)
ROM Features
<*>Aroma choices: full/dirty wipe, debloating, Bixby key remapping, Emoji</*>
<*>Supports G973F(D) and G975F(D)</*>
<*>Base SM-G975F G975FXXU3ASK1 odex/deodex November 2019 patch level</*>
<*>CSC features (camera sound menu, call recording, LTE only mod, camera during call, etc)</*>
<*>Knox removed, 1170 fonts by Winb33, AppLock</*>
<*>Included the security bypass from Ian’s multidisabler</*>
<*>build.prop tweaks: multiuser, Bluetooth Aptx driver, call ring delay, SHealth fix, WiFi and BT passwords remember</*>
<*>Dual SIM + SD Card, allow ss in secure apps, disable sig verification, SecureFolder</*>
<*>Reboot directly into rooted system from power menu, disable high volume warning</*>
<*>Possibility to choose in aroma to remove the boot warning</*>
Added/fixed in v5.8
<*>November ASK1 sw level</*>
Credits
- John Wu for Magisk
- Ianmcd for his multidisabler
- Ianmcd & Geiti for the TWRP
- Winb33for the fonts app
- SuperR for his kitchen
- fOmey for his smali patcher
- Khongloi for Secure Folder fix
- Corsicanu for his help and advices
- Sannoc for his help and support
- All people from Telegram group for testing (especially Nathan, Carlos, Raphael, Jay, Alan
Download Link
Google Drive
Digi Link
Flashable patched TWRP S10 (G973F)
Flashable patched TWRP S10+ (G975F)
Installation procedure for upgrade from BeyondROM v5.4 / v5.5
- Take a full TWRP backup
- Dirty flash or clean flash is ok
Installation procedure for upgrade from BeyondROM less than v5.4
- If you are on stock ROM, follow the attached guide
This ROM version needs minimum ASIG BL and ASIG TWRP/recovery or it won't boot !!!
1. Boot in TWRP and take a full backup before flashing BeyondRom 5.8 ROM zip
2. Copy the ROM zip to your phone (Ext SD preferably)
3. Download Ian’s Multidisabler v1.6 or higher and copy it to your phone
4. Download Ian’s TWRP 3.3.1-11, copy it to your phone and patch it with Magisk Manager or use the patched TWRP from gdrive folder
5. Download the stock FW for your device (S10 or S10+) – Frija is a good tool to use
6. Extract the AP from stock FW, copy it to a temp folder on your internal SD
7. Patch in Magisk Manager the AP
8. Copy the patched AP to your PC and replace the recovery.img inside the AP with the patched TWRP from point 4. Rename the patched TWRP to recovery.img before replacing it into the patched AP
9. Open Odin 3.13.1 or 3.13.3 and fill all slots with: patched AP, BL, CP and HOME_CSC. Uncheck the automatic restart and start flashing.
10. Once flashing completed, long press VOL DOWN + POWER until screen becomes black. IMEDIATELY the screen gets black, press VOL UP + BIXBY + POWER BUTTON to enter to TWRP recovery.
11. Once in TWRP, flash the Multidisabler v1.6 and right after flash BeyondROM v5.8 No need to reboot in between.
12. After flashing the ROM zip, save the aroma log, go back to TWRP root menu and select Reboot --> Recovery
13. Wait for the boot up (5-7 minutes) and setup your ROM to your liking
14. Enjoy the release of BeyondROM
Advises
1. Clean install if you have issues with dirty flash; don't start flashing BR5 without a twrp backup of your existing rom
2. If you have flashing issues: check rom zip MD5 hash
3. If you consider that the moded services are the culprit for your SnapChat ban, use stock services.jar provided in the download folder
4. If you like my work, consider buying me a coffee (PayPal link)
Helpful links
Telegram chat
Happy flashing good people!
Always good to see a new rom for the S10(+)
:good::good:
i dont have LTE, only 4G.
what CSC should I chose when flashing?
mcn1970 said:
i dont have LTE, only 4G.
what CSC should I chose when flashing?
Click to expand...
Click to collapse
They're the same thing. It's just the way your phone is reporting the connection.
Regards,
Nathan
sevsman said:
They're the same thing. It's just the way your phone is reporting the connection.
Regards,
Nathan
Click to expand...
Click to collapse
features of the ROM presents LTE instead of 4G mod.
this is what I mean
mcn1970 said:
features of the ROM presents LTE instead of 4G mod.
this is what I mean
Click to expand...
Click to collapse
You have to choose it in the aroma. You may well have missed the option and a dirty flash will fix it.
Regards,
Nathan
sevsman said:
You have to choose it in the aroma. You may well have missed the option and a dirty flash will fix it.
Regards,
Nathan
Click to expand...
Click to collapse
i don't have this in Aroma
another one
??? Good luck with flashing it guys!
I can confirm it is working well on S10 G973F.
Thanks a lot @Andrei1973 @starbucks2010
Thank you for the update! :good::good::good:
Wow July update. !!!
:fingers-crossed::fingers-crossed::fingers-crossed:
Installed. So far working fine. Thanks OP.
how can I install TWRP for Galaxy S10+
and kernel?
tried this at least half a dozen times and get stuck at the same spot. I can root and get Magisk and be fine. Then I patch the appropriate TWRP file for my kernel (S10+ twrp-beyond2lte-3.3.1-3.1_ianmacd.img) and then I open the .tar file. I exchange out the recovery.img with the newly patched one. Then I repackage as a tar using B1 free archiver (this may be the issue, but it seems fine). It creates a new AP file. I insert that into Odin (the same version that worked previously) along with the corresponding BL, CP, and CSC files (I have tried both CSC and Home CSC). I boot into download, hook up my phone, hit flash and VOILA...NOTHING!!!! It says, "file analysis" and crashes every time. After a while I got sick of trying so I made an attempt to flash the recovery.img file straight through TWRP app by itself. All that did was cause an infinite boot loop. Can anyone please help me? Here are my rom file names.
AP_G975FXXU1ASE7_CL16003457_QB24029035_REV01_user_low_ship_meta_OS9.tar.md5
BL_G975FXXU1ASE7_CL16003457_QB24029035_REV01_user_low_ship.tar.md5
CP_G975FXXU1ASE5_CP12748354_CL16003457_QB23792291_REV01_user_low_ship.tar.md5
CSC_OMC_OXM_G975FOXM1ASE5_CL16003457_QB23792291_REV01_user_low_ship.tar.md5
HOME_CSC_OMC_OXM_G975FOXM1ASE5_CL16003457_QB23792291_REV01_user_low_ship.tar
MM Pre-patched AP + TWRP name is "magisk_patched + TWRP.tar."
The TWRP file I downloaded was: twrp-beyond2lte-3.3.1-3.1_ianmacd.img which I of course renamed to recovery.img.
THEN AFTER I GET THIS WORKING, DO I JUST FLASH STRAIGHT THE ZIP FOR THE CUSTOM ROM INSIDE TWRP AND THAT'S IT?
TIA
I just noticed that every time I create the tar file it eliminates the .MD5 extension. Can I just edit the file name to include the .MD5 or do I have to do something special to actually modify the file? Thank you.
kevinjmoore said:
I just noticed that every time I create the tar file it eliminates the .MD5 extension. Can I just edit the file name to include the .MD5 or do I have to do something special to actually modify the file? Thank you.
Click to expand...
Click to collapse
I think your archive editor isn't up to scratch, install 7zip from here Download
Try using this recovery, its a working pre magisk patched image G973F_magisk_patched3.3.1-3.1.img
Rename it to recovery.img and replace the one inside your magisk patched version of AP_G975FXXU1ASE7_CL16003457_QB24029035_REV01_user_ low_ship_meta_OS9.tar.md5 using 7zip. Then flash with odin.
Hope this helps
kevinjmoore said:
I just noticed that every time I create the tar file it eliminates the .MD5 extension. Can I just edit the file name to include the .MD5 or do I have to do something special to actually modify the file? Thank you.
Click to expand...
Click to collapse
Just delete md5 extension, you don't need that. Odin will flash *.tar file without any problems
Thank you for the reply. There are three things that I'm not sure about. All the versions of 7zip that I have used can't create or edit tar files. The second is my device is 975F not 973. Finally, what are the exact steps to replace the recovery file in 7ZIP? That seems to be where it's having the hangup.
@oggi21 I only added that extension as a last resort. It won't flash the regular tar file once I add the patched AP with TWRP recovery using the B1 archiver. Any help would be appreciated.
Any chance of US CSC's like TMB could be implemented?
kevinjmoore said:
Thank you for the reply. There are three things that I'm not sure about. All the versions of 7zip that I have used can't create or edit tar files. The second is my device is 975F not 973. Finally, what are the exact steps to replace the recovery file in 7ZIP? That seems to be where it's having the hangup.
@oggi21 I only added that extension as a last resort. It won't flash the regular tar file once I add the patched AP with TWRP recovery using the B1 archiver. Any help would be appreciated.
Click to expand...
Click to collapse
The best way is to take any tar file (AP or whatever) and open it in 7zip. Then put yours files in it and delete all others that was inside
i just need the flash all bat script , i need it to flash stock rom , the one i downloaded didnt come with anything or please share a link where i can download proper stock rom with all needed files to flash it
Please use this thread to download the ROM/Firmware you need: https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871
C302 said:
Please use this thread to download the ROM/Firmware you need: https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871
Click to expand...
Click to collapse
i downloaded similaire one but it has nothing with it , the file is tgz form when i open it there is a tar file inside and that's all
.tar is an archive file. You have to extract it also