Develop Bugs

[ROOT] [MAGISK] How to root

Just wanted to inform you, that rooting with Magisk works like a charm. Even without TWRP.
What you need:
Magisk Manager: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
boot.img from your ROM (prepatched boot.img for CN_V10.0.11.0 ROM here: https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=19)
Unlocked Bootloader
ADB and Fastboot on your PC (Simple ADB & Fastboot Installer: https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=5)
Installation:
Install MagiskManager.apk on your Smartphone
---SKIP IF YOU USE THE PREPATCHED BOOT.IMG---
Put the unpatched boot.img on your phone
Open MagiskManager and Click "Install"
Select "Patch boot.img" and choose the boot.img with your file manager
Copy the "patched_boot.img" file on your PC
---CONTINUE HERE---
Now connect your Mix 3 to the PC and boot in fastboot mode (over the command line: adb reboot bootloader)
Navigate with the command line to your folder, where you saved the patched_boot.img
Now flash the patched_boot.img file with fastboot: fastboot flash boot patched_boot.img
If the flash is successfull you can reboot the phone with fastboot reboot
Open the MagiskManager and verify that Magisk is installed and your phone is rooted.

Thanks so much! Will try this out! Nice work!

Thanks, after i root my mix 3 can i flash the xiaomi.eu rom on it too without problems ?

Normally you don't need root to flash Xiaomi.eu ROM, just TWRP. But there is no TWRP yet. You could try "Flash Fire", but I don't know if it would work. Never did that before. If you try it make sure, that you have USB Debugging enabled and know how to use common tools like MiFlash etc.
If you are unexperienced wait for TWRP.

PJF16 said:
Normally you don't need root to flash Xiaomi.eu ROM, just TWRP. But there is no TWRP yet. You could try "Flash Fire", but I don't know if it would work. Never did that before. If you try it make sure, that you have USB Debugging enabled and know how to use common tools like MiFlash etc.
If you are unexperienced wait for TWRP.
Click to expand...
Click to collapse
I used TWRP before and Rooted before too but i never used Flash Fire or Flashify. I don't know how hard it would be to use them.

Please report back your success and how it goes for you!

SacredSovL said:
I used TWRP before and Rooted before too but i never used Flash Fire or Flashify. I don't know how hard it would be to use them.
Click to expand...
Click to collapse
It's risky and something I won't be trying, I would wait for TWRP

Hi PJF16
How did you get the boot.img from your device without root? I'd love to make a unmodified copy before trying this out

I got it from the fastboot ROM which I also uploaded to the forum. See here: https://forum.xda-developers.com/mi-mix-3/development/xiaomi-mi-mix-3-fastboot-roms-t3869532

Tested and 100% working! Recommended

smiba said:
Tested and 100% working! Recommended
Click to expand...
Click to collapse
Did u flash xiaomi.eu rom or something else ?

PJF16 said:
Just wanted to inform you, that rooting with Magisk works like a charm. Even without TWRP.
What you need:
Magisk Manager: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
boot.img from your ROM (prepatched boot.img for CN_V10.0.11.0 ROM here: https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=19)
Unlocked Bootloader
ADB and Fastboot on your PC (Simple ADB & Fastboot Installer: https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=5)
Installation:
Install MagiskManager.apk on your Smartphone
---SKIP IF YOU USE THE PREPATCHED BOOT.IMG---
Put the unpatched boot.img on your phone
Open MagiskManager and Click "Install"
Select "Patch boot.img" and choose the boot.img with your file manager
Copy the "patched_boot.img" file on your PC
---CONTINUE HERE---
Now connect your Mix 3 to the PC and boot in fastboot mode (over the command line: adb reboot bootloader)
Navigate with the command line to your folder, where you saved the patched_boot.img
Now flash the patched_boot.img file with fastboot: fastboot flash boot patched_boot.img
If the flash is successfull you can reboot the phone with fastboot reboot
Open the MagiskManager and verify that Magisk is installed and your phone is rooted.
Click to expand...
Click to collapse
I feel like I'm missing something. I fastboot flash but it gets hung up in cmd. Should not take as long as it is trying to

souless poet said:
I feel like I'm missing something. I fastboot flash but it gets hung up in cmd. Should not take as long as it is trying to
Click to expand...
Click to collapse
Nevermind figured it out...duh.

Not working on 8.11.15 dev china rom...
Patched boot is much smaller than it should be and after flashing and fastboot reboot command, phone goes back to fastboot mode

It's normal that the patched boot.img is smaller.

PJF16 said:
It's normal that the patched boot.img is smaller.
Click to expand...
Click to collapse
I know that.
But this is quite smaller than usual and, anyway, it doesn't boot after flashing

Anyone have any issues with v4A magisk module? After I flashed it I lost the ability to turn on wifi. Wondering if anyone else has had that issue.

where can i find the pre patched boot img of 10.0.12.0?

Just use the one for 10.0.11.0.

nosidefcp said:
where can i find the pre patched boot img of 10.0.12.0?
Click to expand...
Click to collapse
Hi, here You can find patched boot for 10.0.12.0:
https://yadi.sk/d/aVlSEC_r7xj0VA

[ROOT/MAGISK] OOS 10.0.12 Magisk patched_boot.img

For future use or other versions like OOS EUROPE,INDIA, etc. , you can patch your own boot.img with my tool here
But for now just follow the instructions
Boot.img patched with MAGISK 20.4 on OOS 10.0.12 HD65AA (GLOBAL)
Only for OOS 10.0.12 Global!!!!
Enjoy!
Instructions:
reboot to fastboot
Code:
adb reboot bootloader
Code:
fastboot boot magisk_patched_10_0_12.img
let it boot and check if u have root
if u got root then reboot to fastboot again
Code:
adb reboot bootloader
Code:
fastboot flash boot magisk_patched_10_0_12.img
When finished type
Code:
fastboot reboot
patched boot.img download: https://drive.google.com/file/d/1JeNPnEtKKkXYBVlo4pW0VUEnP1BQ7nt_/view?usp=sharing
stock boot.img download: https://drive.google.com/file/d/1rrUcVyTBUl-sED35lxuK82UQ0hHM_PRg/view?usp=sharing

I would be glad if somebody share Magisk patched boot to 10.0.12HD65BA for EU version
Tapatalk via OnePlus 7T

Thank You

I would be glad if somebody share Magisk patched boot to 10.0.12HD65BA for EU version. I can not patch it myself, because 10.0.12HD65BA is not online on oneplus website.

ba47 said:
I would be glad if somebody share Magisk patched boot to 10.0.12HD65BA for EU version. I can not patch it myself, because 10.0.12HD65BA is not online on oneplus website.
Click to expand...
Click to collapse
If u r already on 10.0.12 EU u dont need the rom
If u r on previous OOS then use the oxygen updater app from Play store to update

ba47 said:
I would be glad if somebody share Magisk patched boot to 10.0.12HD65BA for EU version. I can not patch it myself, because 10.0.12HD65BA is not online on oneplus website.
Click to expand...
Click to collapse
One guy already upload this file here :
https://drive.google.com/file/d/1-_3fL5HkWS9cplro7iNiIzqlL_AGTz2B/view?usp=drivesdk
Tapatalk via OnePlus 7T

Hm, I have HD65AA India and after boot (not flash) via fastboot attached here patched boot.img I don't have internet (gsm and wifi).
Do you have India's version of that patch ?

KyoshiDev said:
Instructions:
reboot to fastboot
Code:
adb reboot bootloader
Code:
fastboot boot magisk_patched_10_0_12.img
let it boot and check if u have root
if u got root then reboot to fastboot again
Code:
adb reboot bootloader
Code:
fastboot flash boot magisk_patched_10_0_12.img
Click to expand...
Click to collapse
4. and 5. Step isn't needed.
When you boot your image and check if you have root you just klick: Install --> Install --> direct install. It will automatically patch your actual boot.img and you will permanently have a rooted phone.

I didn't find patched boot.img to 10.0.12/10.3.4 India (!) version, so I created my own (faq linked above).
It works on my device like a charm. I have already gsm internet and WiFi and of course rooted device.
If someone wants to try on 10.3.4/10.0.12 AA (Global and only India version) , I put my patched boot.img here:
https://drive.google.com/file/d/1p6tgyc_WcLl2CW4ysq4xGgFXnmO95Kl0/view?usp=sharing

Did not work for me on reboot after root check says not rooted?
---------- Post added at 06:54 PM ---------- Previous post was at 06:44 PM ----------
Nope did not work for me say I do not have root on root check?

=dgim= said:
I didn't find patched boot.img to 10.0.12/10.3.4 India (!) version, so I created my own (faq linked above).
It works on my device like a charm. I have already gsm internet and WiFi and of course rooted device.
If someone wants to try on 10.3.4/10.0.12 AA (Global and only India version) , I put my patched boot.img here:
https://drive.google.com/file/d/1p6tgyc_WcLl2CW4ysq4xGgFXnmO95Kl0/view?usp=sharing
Click to expand...
Click to collapse
I have updated to 10.3.4.HD65AA yesterday. Have been rooted since much earlier version with Magisk Canary. Now I want to change to stable but not sure of the process.
How do I uninstall Canary version? There does not seem to be any uninstall option in Magisk Manager Canary version. Can I just uninstall as I would any other app?
Is the file you uploaded correct for my version? Would it install Magisk Stable version?
After going into fastboot do I have to connect to PC and give commands there or in the phone itself. Have done it earlier but I forgot. If from PC, which software to use for ADB?
Edit : Will this wipe data?

You can use via TWRP, I suppose (not tested) this Magisk's unistall zip file: https://github.com/topjohnwu/magisk_files/tree/canary
If you flashed a new rom (10.3.4) I believe that you have already stock boot.img, so device is unrooted.
If yes, you can - first, only booted my patched_boot.img to see that everything is OK (gsm, wifi, magisk manager works etc),
and, then, try flash it via fastboot.
I patched my stock boot.img (10.3.4 India version) via latest Magisk Canary.
Here is FAQ:
https://forum.xda-developers.com/oneplus-7t/how-to/guide-how-to-root-oneplus-7t-twrp-t3979307

=dgim= said:
You can use via TWRP, I suppose (not tested) this Magisk's unistall zip file: https://github.com/topjohnwu/magisk_files/tree/canary
If you flashed a new rom (10.3.4) I believe that you have already stock boot.img, so device is unrooted.
If yes, you can - first, only booted my patched_boot.img to see that everything is OK (gsm, wifi, magisk manager works etc),
and, then, try flash it via fastboot.
I patched my stock boot.img (10.3.4 India version) via latest Magisk Canary.
Here is FAQ:
https://forum.xda-developers.com/oneplus-7t/how-to/guide-how-to-root-oneplus-7t-twrp-t3979307
Click to expand...
Click to collapse
I think TWRP is not working for OnePlus7T so not sure about that.
I have updated from rooted 10.3.2 to 10.3.4 via OTP and I already have Magisk Canary. So I am rooted. I want to remove this and get to Magisk Stable version.

jesrani said:
I think TWRP is not working for OnePlus7T so not sure about that.
I have updated from rooted 10.3.2 to 10.3.4 via OTP and I already have Magisk Canary. So I am rooted. I want to remove this and get to Magisk Stable version.
Click to expand...
Click to collapse
Booting and flashing TWRP on recovery partition, I suppose, is working.
I didn't flash Magisk install or unistall via TWRP on OP7T.
Are you sure that, after flashing new rom, your device is rooted ?
Even you have installed Magisk Canary, but - SatetyNet etc, is passed in your device after flashed stock 10.3.4 ?
If not, you can just unistall apk (Magisk Manager), clear cache, flash patched boot.img and install stable Magisk (I didn't test stable on 10.3.4).

I'm lost somehow.
I'm rooted, Global (USA) phone. Last version is 10.0.11.
First, to which directory do I download the patched .img file. To my phone, to my computer? So far I have put in both Magisk directory and my root directory.
I reboot the bootloader. Fine. I fastboot the patched image. Fine. Check for root. Fine
I reboot the bootloader. Fine. Comes up with a menu. The top of the menu says Start.
Then I type fastboot flash boot magisk_patched_10_0_12.img. And nothing happens. I have tried the power button and nothing either. I tried going into Magisk and install as another forum member suggested, but now my phone comes up, still hasn't upgraded to 12. Also now when I click any app the phone it just reboots itself. So I'm really messed up.
My question is what was suppose to happen when i clicked fastboot flash boot magisk_patched_10_0_12.img with the bootloader menu on my screen and where was the .img file suppose to be located. Am I doing this right from my PC (Win10 - PowerShell).
I'm lost because I have been upgrading previously and have had no trouble. Where did I go wrong. Much thanks.
KyoshiDev said:
For future use or other versions like OOS EUROPE,INDIA, etc. , you can patch your own boot.img with my tool here
But for now just follow the instructions
Boot.img patched with MAGISK 20.4 on OOS 10.0.12 HD65AA (GLOBAL)
Only for OOS 10.0.12 Global!!!!
Enjoy!
Instructions:
reboot to fastboot
Code:
adb reboot bootloader
Code:
fastboot boot magisk_patched_10_0_12.img
let it boot and check if u have root
if u got root then reboot to fastboot again
Code:
adb reboot bootloader
Code:
fastboot flash boot magisk_patched_10_0_12.img
patched boot.img download: https://drive.google.com/file/d/1JeNPnEtKKkXYBVlo4pW0VUEnP1BQ7nt_/view?usp=sharing
stock boot.img download: https://drive.google.com/file/d/1rrUcVyTBUl-sED35lxuK82UQ0hHM_PRg/view?usp=sharing
Click to expand...
Click to collapse

davekaye said:
I'm rooted, Global (USA) phone. Last version is 10.0.11.
First, to which directory do I download the patched .img file. To my phone, to my computer? So far I have put in both Magisk directory and my root directory. .
Click to expand...
Click to collapse
to your computer, or rather, to the directory where your adb and fastboot files are, or if you have adb installed system widely, you should put your img in the folder where you are running your cmd window or you can navigate with cmd to the file with "cd"
davekaye said:
Then I type fastboot flash boot magisk_patched_10_0_12.img. And nothing happens. I have tried the power button and nothing either. I tried going into Magisk and install as another forum member suggested, but now my phone comes up, still hasn't upgraded to 12. Also now when I click any app the phone it just reboots itself. So I'm really messed up.
Click to expand...
Click to collapse
What do you mean with "still hasn't upgraded to 12"? You mean OOS 10.0.12? Then you need to update from 10.0.11 to 10.0.12 before rooting your boot partition with a boot.img from an OOS 10.0.12
davekaye said:
My question is what was suppose to happen when i clicked fastboot flash boot magisk_patched_10_0_12.img with the bootloader menu on my screen and where was the .img file suppose to be located. Am I doing this right from my PC (Win10 - PowerShell).
I'm lost because I have been upgrading previously and have had no trouble. Where did I go wrong. Much thanks.
Click to expand...
Click to collapse
nothing should happen to your bootloader screen, but you should see in your cmd window, that the flashing finished, then you can type "fastboot reboot" to reboot your phone.

KyoshiDev said:
to your computer, or rather, to the directory where your adb and fastboot files are, or if you have adb installed system widely, you should put your img in the folder where you are running your cmd window or you can navigate with cmd to the file with "cd"
What do you mean with "still hasn't upgraded to 12"? You mean OOS 10.0.12? Then you need to update from 10.0.11 to 10.0.12 before rooting your boot partition with a boot.img from an OOS 10.0.12
nothing should happen to your bootloader screen, but you should see in your cmd window, that the flashing finished, then you can type "fastboot reboot" to reboot your phone.
Click to expand...
Click to collapse
Thanks. My fault. Since I don't have a working TWRP I haven't been playing around with any ROMs and I guess I'm rusty. So I tried to put your upgrades on the wrong version of Oxygen (11 not 12) and ran into a bootloop. I could not boot into EDL mode (another issue I have to follow up) and it took me some time to finally boot back to 11 and then do the OTA upgrade to 12. All is working now, so thanks again.

Hello, is SafetyNet supposed to fail or I've messed something up?

1nikolas said:
Hello, is SafetyNet supposed to fail or I've messed something up?
Click to expand...
Click to collapse
Safetynet should pass

So i put this on my US version. HD1905. I should have been more careful. Anyway, everything works well except netflix., which is now a system app and will not run or uninstall.
PS: Do you have US version patched boot file ?

Rooting 7T without TWRP / Pre-patched Magisk boot.img for 10.0.13.HD65AA (Global)

For those who can't root via TWRP or somehow lost root while updating (like I did), I have a patched boot image to aid others in this endeavor. This is a boot.img from a T-Mobile 7T which I had converted to the Global ROM, extracted and patched by Magisk after applying the latest update (10.0.13.HD65AA). Fully tested and working!
Instructions:
Unzip and place it in a convenient folder (ie, C:/adb/ or whatever's easy to remember.
Open a cmd prompt and navigate to your fastboot/adb folder.
Then run the command
Code:
fastboot boot boot.img
Your phone will be "temp-rooted" once it boots. If you haven't already, install Magisk Manager, then flash Magisk itself (ALWAYS do direct install!).
Don't install any modules yet. Just reboot when prompted after the Magisk flashing process is done.
Profit!
Download from Google Drive
[I dunno where else to upload this that XDA would consider "safe," so GDrive it is, I suppose.]
Spoiler: Process for manually patching the boot.img without TWRP:
Requirements: Stock device with unlocked bootloader only (no other mods), most recent OTA update applied and system rebooted. Fastboot and ADB Windows executables.
1) Enable advanced reboot and usb debugging in developer options.
2) Reboot to bootloader.
Code:
adb reboot bootloader
3) Boot to twrp
Code:
fastboot boot twrp.img
(or whatever you named it).
4) Once booted, enter:
Code:
adb shell
dd if=/dev/block/bootdevice/by-name/boot of=/tmp/boot.img
exit
5.5) Copy file to the PC:
Code:
adb pull /tmp/boot.img stock_boot.img
6) Reboot phone back to Android.
6.5) Copy boot.img back to phone:
Code:
adb push stock_boot.img /sdcard/boot.img
7) Make sure you have a data connection.
8) Install Magisk Manager.
9) Select option to install Magisk (not the Magisk App). Choose "Select and Patch a File."
10) Point to the boot.img.
11) It will do its thing then come back with a done message. File /sdcard/download/magisk_patched.img will be created.
12) Copy this file to your PC, either using MTP or ADB.
Code:
adb pull /sdcard/download/magisk_patched.img
13) Reboot the phone into bootloader mode again.
Code:
adb reboot bootloader
14) Boot the patched boot from step 12:
Code:
fastboot boot magisk_patched.img
15) Launch Magisk Manager again. You should see the current version available and the installed version below that now. If all is good, choose to install/update Magisk, then "Direct install" and reboot when finished.

I guess you posted it in wrong section as mentioned the file is for Oneplus 7t ?

>Akshay< said:
I guess you posted it in wrong section as mentioned the file is for Oneplus 7t ?
Click to expand...
Click to collapse
OH! You're right. I goofed. I'll ask a mod to move it.

This will delete all the data from the phone + bootloader needs to be unlocked?

Brontok said:
This will delete all the data from the phone + bootloader needs to be unlocked?
Click to expand...
Click to collapse
Flashing this doesn't erase your data, unlocking the bootloader does, though (and is necessary to flash this).

GuyInDogSuit said:
Flashing this doesn't erase your data, unlocking the bootloader does, though (and is necessary to flash this).
Click to expand...
Click to collapse
never mind!
someone already did!
https://forum.xda-developers.com/showpost.php?p=83780229&postcount=12
thanks anyway!

Will this work for 10.0.13 tmobile ? Thanks

gershee said:
Will this work for 10.0.13 tmobile ? Thanks
Click to expand...
Click to collapse
You might be better off pulling the boot.img yourself and patching it. I can't guarantee that this will even work on the T-Mobile version. But if you want to test it, just boot the img and root from Magisk once it loads. If it bootloops, well, then we know.
EDIT: Updated OP with instructions on how to patch the boot.img.

GuyInDogSuit said:
You might be better off pulling the boot.img yourself and patching it. I can't guarantee that this will even work on the T-Mobile version. But if you want to test it, just boot the img and root from Magisk once it loads. If it bootloops, well, then we know.
EDIT: Updated OP with instructions on how to patch the boot.img.
Click to expand...
Click to collapse
Thanks!
Worked like a charm.

Problem with Fastboot [root] Alldocube iPlay30 Android10

Hello, I'm trying to root an Android 10 Alldocube tablet iPlay30.
I'm using this guide: https://www.getdroidtips.com/root-alldocube-iplay-30-magisk/
And so trying to unlock the booloader (using Win10) using ABD and Fastboot.
In the command prompt I write: "adb devices"
and win10 recognises the tablet. ok
I write: "adb reboot bootloader"
and ok the tablet reboots in FASBOOT mode
But then if in the command prompt I write: "fastboot devices"
The cursor wraps and nothing happens
If I write: "fastboot flashing unlock"
It appears the writing "<waiting for any device>" and nothing happens
Any help? Thank you!

Don't you try this link to configure the USB in FASBOOT mode, good luck. https://android.stackexchange.com/questions/46142/fastboot-doesnt-see-device/87392#:~:text=Reboot device into fastboot mode,unrecognized device in the list

KimLe said:
Don't you try this link to configure the USB in FASBOOT mode, good luck. https://android.stackexchange.com/questions/46142/fastboot-doesnt-see-device/87392#:~:text=Reboot device into fastboot mode,unrecognized device in the list
Click to expand...
Click to collapse
Thank you! I succeeded in unlocking the bootloader. Unfortunately when I put the patched (from Magisk) boot.img in the Rom file on the PC, and select the scatter.txt, Flash Tool says there is a checksum issue.
Any suggestion please? Thank you!

Can you tried this link from UMIDIGI. It is used ADB and FastBoot commands to install patched (from Magisk) boot.img for Android 10:
https://community.umidigi.com/forum.php?mod=viewthread&tid=19114&extra=page%3D1

KimLe said:
Can you tried this link from UMIDIGI. It is used ADB and FastBoot commands to install patched (from Magisk) boot.img for Android 10:
https://community.umidigi.com/forum.php?mod=viewthread&tid=19114&extra=page%3D1
Click to expand...
Click to collapse
Thank you.
Unfortunately it doesn't work
I suppose there is a problem with Magisk.
The last Magisk apk seems to generate correctly a file starting from the original boot.img and it calls it "magisk_patched_1HqYW.img"
So if I put it in the original ROM folder and then flash the boot with SP Flash Tool, it seems to go all ok, but the tablet isn't rooted.
If I use to flash it with ADB, it flashes the magisk file correctly ... but then the tablet is bricked. It doesn't boot and goes on and off in loop with the first image only.
Fortunately, flashing the complete original ROM with SP Flash Tool, it returns ok to factory status....
The bootloader is still unlocked but no way to root the device. I suppose, I repeat, for a wrong img file from Magisk.
Any solution? Magisk is the last version. So Magisk Manager 8.0.4
I see it's very different from the other past versions (from tutorial I can find around, I mean)
If someone knows also of other Alldocube tablets rooted recently, it could be good.
The iPlay 20 for example (with windows, not linux)
Thank you!

Albertohf said:
Thank you.
Unfortunately it doesn't work
I suppose there is a problem with Magisk.
The last Magisk apk seems to generate correctly a file starting from the original boot.img and it calls it "magisk_patched_1HqYW.img"
So if I put it in the original ROM folder and then flash the boot with SP Flash Tool, it seems to go all ok, but the tablet isn't rooted.
If I use to flash it with ADB, it flashes the magisk file correctly ... but then the tablet is bricked. It doesn't boot and goes on and off in loop with the first image only.
Fortunately, flashing the complete original ROM with SP Flash Tool, it returns ok to factory status....
The bootloader is still unlocked but no way to root the device. I suppose, I repeat, for a wrong img file from Magisk.
Any solution? Magisk is the last version. So Magisk Manager 8.0.4
I see it's very different from the other past versions (from tutorial I can find around, I mean)
If someone knows also of other Alldocube tablets rooted recently, it could be good.
The iPlay 20 for example (with windows, not linux)
Thank you!
Click to expand...
Click to collapse
Cause the Android 10 firmware, it is verified all module flash to it, so if you use SP Flash Tool the stock boot.img will replace your patched-boot.img upon reboot. So it need to flash the module files by ADB/Fastboot to disable-verity when it has been flashed. Those commands work well when I use them to root my Umidigi A9 pro Android 10.

KimLe said:
Cause the Android 10 firmware, it is verified all module flash to it, so if you use SP Flash Tool the stock boot.img will replace your patched-boot.img upon reboot. So it need to flash the module files by ADB/Fastboot to disable-verity when it has been flashed. Those commands work well when I use them to root my Umidigi A9 pro Android 10.
Click to expand...
Click to collapse
You are GREAT! It was my fault! I did not followed the instructions properly! iPlay30 rooted!

albyhf said:
You are GREAT! It was my fault! I did not followed the instructions properly! iPlay30 rooted!
Click to expand...
Click to collapse
Glad your iPlay30 Rooted.

albyhf said:
You are GREAT! It was my fault! I did not followed the instructions properly! iPlay30 rooted!
Click to expand...
Click to collapse
What instructions did you used?

Question Need help rooting the Poco F3

Hello fellow XDA'ers
I have waited and unlocked the phone, running the MIUI 12.5.1.0 (RKHEUXM) the EU Official Rom that came with the phone, and was following the guide on how to root from NaldoTech, but i'm stuck, magisk can't patch any Firmware file i throw at it...
Don't know what i am doing wrong, i opened the zip files manually looking for the boot.img file but i cant seem to find it in any of the Firmwares i download from XiaomiFirmwareUpdater.
Also tried downloading the rom file and extracting the contents using the xiaomi-flashable-firmware-creator, but no luck with that either, throws some permission error at extracting the payload.bin
what can i do from here??
thanks in advance

Easy peasy
Steps
Download Adb and fastboot tool.
Or just download TWRP image and start CMD from there "the folder containing the twrp img" (in destination bar type cmd and press Enter) /the drivers should be installed and working properly ofc.
1- set phone in fastboot mode then plug it in to PC
2- Type: fastboot boot twrp.img (twrp here is the img file)
Then the phone will boot into twrp.
The phone will be shown in PC. Paste Magisk in the phone. Then go back and flash it using TWRP. Then reboot to system. And you're all done.

laid1995 said:
.
Click to expand...
Click to collapse

doesnt boot to twrp just turns off :S

Fyat said:
doesnt boot to twrp just turns off :S
Click to expand...
Click to collapse
You're doing something wrong then.
Check all drivers are set up properly. Try flashing twrp then boot to it using Volume UP + Power button.

Make sure you download Nebrassy's twrp 3.5.10

Managed to do it, not with twrp tho, the way i intended originally, i found this payload extractor, went on miui and download latest package (on the phone), after that sent the file to pc and extracted the contents to the payload extractor tool, follow the tool's guide and Tadaaaa! got yoursef a boot.img.
after that was simple and follow the rest of the NaldoTech guide, which is sending the boot.img to phone, open magisk manager, click install, select the boot image to pach, wait couple seconds and done. After that just copy the magisk patched boot image to pc and turn off your phone, enter fastboot, and flash the boot.img in boot_a and boot_b.
and you are done boot the phone and open magisk app to see the installed confirmation

Fyat said:
Managed to do it, not with twrp tho, the way i intended originally, i found this payload extractor, went on miui and download latest package (on the phone), after that sent the file to pc and extracted the contents to the payload extractor tool, follow the tool's guide and Tadaaaa! got yoursef a boot.img.
after that was simple and follow the rest of the NaldoTech guide, which is sending the boot.img to phone, open magisk manager, click install, select the boot image to pach, wait couple seconds and done. After that just copy the magisk patched boot image to pc and turn off your phone, enter fastboot, and flash the boot.img in boot_a and boot_b.
and you are done boot the phone and open magisk app to see the installed confirmation
Click to expand...
Click to collapse
Whatever was your way, I'm glad you managed to do it

sir i need boot.img file for poco f3

ZAki6464 said:
sir i need boot.img file for poco f3
Click to expand...
Click to collapse
Good

Which version do you need?

Is this international version I should get to use in USA on T-Mobile to root the same way as you?
Amazon F3

I'm using Europe version currently on Global 12.5.6.0 (RKHEUXM)

Fyat said:
I'm using Europe version currently on Global 12.5.6.0 (RKHEUXM)
Click to expand...
Click to collapse
Do you have access to gpu rendering tweaks in turbo game mode ? I can't make it work, I'm on same version than you

Greenspoof said:
Do you have access to gpu rendering tweaks in turbo game mode ? I can't make it work, I'm on same version than you
Click to expand...
Click to collapse
I'm not sure where to find these options as i do not use the turbo mode, can you point to it?