Just got my 11 and enabled Developer Options. I don’t see a toggle for Advance Power Options. Is there an option to enable this setting on the phone?
Thanks!
azsl1326 said:
Just got my 11 and enabled Developer Options. I don’t see a toggle for Advance Power Options. Is there an option to enable this setting on the phone?
Thanks!
Click to expand...
Click to collapse
as far as I know, it no longer exists (is also no longer available on my op 9p with oos 13)
Assuming you can or want to root, the best option that works on Android 13 is likely: https://github.com/KieronQuinn/ClassicPowerMenu
Swap_File said:
Assuming you can or want to root, the best option that works on Android 13 is likely: https://github.com/KieronQuinn/ClassicPowerMenu
Click to expand...
Click to collapse
How difficult is root to achieve on the 11? Have you unlocked the boot loader?
Thanks!
ChrisFeiveel84 said:
as far as I know, it no longer exists (is also no longer available on my op 9p with oos 13)
Click to expand...
Click to collapse
Yeah I think you are correct. I just checked my 8 Pro and it doesn’t have it either. Thanks for the insight!
Swap_File said:
Assuming you can or want to root, the best option that works on Android 13 is likely: https://github.com/KieronQuinn/ClassicPowerMenu
Click to expand...
Click to collapse
This doesn't work on rooted 10pro a13 so I doubt it will work here either
toolhas4degrees said:
This doesn't work on rooted 10pro a13 so I doubt it will work here either
Click to expand...
Click to collapse
Are you sure it doesn't work in Accessibility Service mode? On my 8 pro it works as long as I don't use it in Xposed mode.
Swap_File said:
Are you sure it doesn't work in Accessibility Service mode? On my 8 pro it works as long as I don't use it in Xposed mode.
Click to expand...
Click to collapse
You can't access accessibility mode originally. If you allow to have all access it allows accessibility but still nothing appears or changes
They changed layout of system apps from op10 up. I will try without Xposed module activated
Swap_File said:
Are you sure it doesn't work in Accessibility Service mode? On my 8 pro it works as long as I don't use it in Xposed mode.
Click to expand...
Click to collapse
Work without Xposed. Thanks for letting me know. Only issue is it flashes stock one prior to opening classic power menu.
Related
I guess specifically speaking about the dual sim i9192 model? Or is there a way to enable it?
SysAdmNj said:
I guess specifically speaking about the dual sim i9192 model? Or is there a way to enable it?
Click to expand...
Click to collapse
It does not have, only BLN with a custom kernel that supports it and u will flash your menu / back keys
SysAdmNj said:
I guess specifically speaking about the dual sim i9192 model? Or is there a way to enable it?
Click to expand...
Click to collapse
In the developer options, you can check Notification Flash. Its a good alternate. It will light up the flash when you get calls and emails. I dont know about texts.
Im going to get it I'm just worried it comes with knox :/
ThuGzta said:
In the developer options, you can check Notification Flash. Its a good alternate. It will light up the flash when you get calls and emails. I dont know about texts.
Click to expand...
Click to collapse
Hmm, I don't have the option in Developer settings. Do I have to install anything?
Regards.
longu said:
Hmm, I don't have the option in Developer settings. Do I have to install anything?
Regards.
Click to expand...
Click to collapse
Not at all. No need to install anything. Do this:
1. Navigate to SETTINGS.
2. Goto MORE.
3. Goto About Phone.
4. You will see a build number, click it (nothing will happen). Keep clicking it 7+ times it will inform you that developers options are activated.
You will find the developer options in the settings.
ThuGzta said:
Not at all. No need to install anything. Do this:
1. Navigate to SETTINGS.
2. Goto MORE.
3. Goto About Phone.
4. You will see a build number, click it (nothing will happen). Keep clicking it 7+ times it will inform you that developers options are activated.
You will find the developer options in the settings.
Click to expand...
Click to collapse
You misunderstood me. I enabled Developer options some time already, but I don't have the option to enable Led notification.
Regards.
longu said:
You misunderstood me. I enabled Developer options some time already, but I don't have the option to enable Led notification.
Regards.
Click to expand...
Click to collapse
What software/build version are you running? Maybe one of you guys took an ota update and removed that option? <unsure>
SysAdmNj said:
What software/build version are you running? Maybe one of you guys took an ota update and removed that option? <unsure>
Click to expand...
Click to collapse
I'm using I9192XXUBML4. rooted with Knox removed. I also removed few apk from /system/app folder.
Regards.
longu said:
You misunderstood me. I enabled Developer options some time already, but I don't have the option to enable Led notification.
Regards.
Click to expand...
Click to collapse
Eek. My bad, its not in the developer options. Its in the accessibility options. You'll see it there. My bad. I dint have my phone with me at that time.
longu said:
I'm using I9192XXUBML4. rooted with Knox removed. I also removed few apk from /system/app folder.
Regards.
Click to expand...
Click to collapse
So yours came with knox and you removed it? How?
ThuGzta said:
Eek. My bad, its not in the developer options. Its in the accessibility options. You'll see it there. My bad. I dint have my phone with me at that time.
Click to expand...
Click to collapse
It seems to only work with text messages? How to make it work with other app notifications?
SysAdmNj said:
So yours came with knox and you removed it? How?
Click to expand...
Click to collapse
The knox bootloader was removed from rom package before installation.
Regards.
SysAdmNj said:
So yours came with knox and you removed it? How?
It seems to only work with text messages? How to make it work with other app notifications?
Click to expand...
Click to collapse
It dint work with the text notifications on my end. Only emails and phone calls. Have no clue if you can configure apps to use this. I think basic Samsung apps only support it mate.
bln does not work with notifications which are turning on the display. So for SMS just use an app like GoSMS where you can configure the display to stay off, like in whatsapp.
All the methods of installing the Google Dialer on the OP5 kinda worked but would not allow the user to answer/decline calls from the notification popup. Well, did some digging on this and found a solution. This is a Magisk Module, so for those that use Magisk, simple flash and restart. Be sure you select the new Phone app as default for calls. Also, need to go in and manually set the permissions for the app.
This can be done by going to "app info" for default OnePlus phone app and disabling, then by going to Google Phone "app info" and clicking on Phone App, then on the "Configure apps screen, changing the default Phone App to the only option you should have (after disabling the default one) which is the Google "Phone". Then make sure your new Phone app has all it's permissions.
Enjoy!
Update: TWRP install method added for those not using Magisk. Just flash the zip and good to go.
Magisk Module v2.1a: Update Sep 5, 2017
https://www.androidfilehost.com/?fid=817550096634797320
TWRP Install:
https://www.androidfilehost.com/?fid=889764386195918352
Thanks intall working
Thanks can you make a non magisk flash able zip? I'm decrypted and magisk only works on encrypted setup as far I know.
Sent from my OnePlus5 using XDA Labs
Great Tweak mate! Thank you so much
I'm expecting an important call today, but will test thoroughly later.
ilia1985 said:
Thanks can you make a non magisk flash able zip? I'm decrypted and magisk only works on encrypted setup as far I know.
Sent from my OnePlus5 using XDA Labs
Click to expand...
Click to collapse
This *may* work. I am new to installer scripts, so hopefully I wrote this correctly... Please let me know.
badcrow35 said:
Thanks intall working
Click to expand...
Click to collapse
I don't own a OnePlus 5, I have a 3 but I saw a Turkish text and decided to write. How did you get access to OnePlus 5? Have you imported it from abroad or are you living in abroad?
Brought with my friend from abroad UK
ilia1985 said:
Thanks can you make a non magisk flash able zip? I'm decrypted and magisk only works on encrypted setup as far I know.
Click to expand...
Click to collapse
dustintinsley said:
This *may* work. I am new to installer scripts, so hopefully I wrote this correctly... Please let me know.
Click to expand...
Click to collapse
Can anyone confirm if the zip works?
dustintinsley said:
All the methods of installing the Google Dialer on the OP5 kinda worked but would not allow the user to answer/decline calls from the notification popup. Well, did some digging on this and found a solution. This is a Magisk Module, so for those that use Magisk, simple flash and restart. Be sure you select the new Phone app as default for calls. Also, need to go in and manually set the permissions for the app.
This can be done by going to "app info" for default OnePlus phone app and disabling, then by going to Google Phone "app info" and clicking on Phone App, then on the "Configure apps screen, changing the default Phone App to the only option you should have (after disabling the default one) which is the Google "Phone". Then make sure your new Phone app has all it's permissions.
Enjoy!
https://www.androidfilehost.com/?fid=889764386195917884
Click to expand...
Click to collapse
Work like a charm wish everything went this easy
Awesome, works just fine. This has been driving me bonkers lol.
Working great! I use xxx rom with latest Magisk. Thx! :highfive:
dreams.sri said:
Can anyone confirm if the zip works?
Click to expand...
Click to collapse
I have not tested it as I use Magisk, but it should work. Worse case is that it will still not answer from notification. Should not cause any boot loop or anything like that. Have you tried the zip? There should be no issues with it, if you have issues please let me know so I can fix it...
Binary Assault said:
Awesome, works just fine. This has been driving me bonkers lol.
Click to expand...
Click to collapse
Same here man. It was driving me nuts. I'm kinda OCD so I had to figure it out. Glad others find it useful...
But OnePlus Dialer Is Better Than Google One ?
Krsambhav16 said:
But OnePlus Dialer Is Better Than Google One ?
Click to expand...
Click to collapse
Not sure that I agree, but to each his own...
Can someone explain how to flash the magisk module? Flash it via TWRP or via Magisk?
Donald Nice said:
Can someone explain how to flash the magisk module? Flash it via TWRP or via Magisk?
Click to expand...
Click to collapse
You can do it either way. I prefer doing it via Magisk, but either should work.
does it vibrate when the call connects?
dustintinsley said:
This *may* work. I am new to installer scripts, so hopefully I wrote this correctly... Please let me know.
Click to expand...
Click to collapse
Thanks for taking time to make it. Just tried and TWRP throws error 6.
Hi Folks -
Does anyone know a way to double tap the "lockscreen" to have the phone lock (or switch off screen display).
This is a very popular/common option in Custom ROMs. But I haven't been able to locate this independently.
I've tried Nova launcher for double tap to screen off, but that doesn't work on lockscreen. None of the apps on the playstore seem to work on the lockscreen.
This is a useful feature where in one can check the notifications on the lockscreen and switch off the screen without unlocking the phone.
Any suggestions would be much appreciated. Thanks in advance.
StatusbarSleep
iamjimmy said:
Hi Folks -
Does anyone know a way to double tap the "lockscreen" to have the phone lock (or switch off screen display).
This is a very popular/common option in Custom ROMs. But I haven't been able to locate this independently.
I've tried Nova launcher for double tap to screen off, but that doesn't work on lockscreen. None of the apps on the playstore seem to work on the lockscreen.
This is a useful feature where in one can check the notifications on the lockscreen and switch off the screen without unlocking the phone.
Any suggestions would be much appreciated. Thanks in advance.
Click to expand...
Click to collapse
Hi, I'm using StatusbarSleep, a Xposed module for double tapping lockscreen to turn off.
Samuel Holland said:
Hi, I'm using StatusbarSleep, a Xposed module for double tapping lockscreen to turn off.
Click to expand...
Click to collapse
Thanks so much for the reply.
Could you please provide instruction steps to install Xposed and status bar sleep module? I always get confused on whether Xposed needs to be installed through magdisk or not?
Thanks in advance.
iamjimmy said:
Thanks so much for the reply.
Could you please provide instruction steps to install Xposed and status bar sleep module? I always get confused on whether Xposed needs to be installed through magdisk or not?
Thanks in advance.
Click to expand...
Click to collapse
Before you jump into the deep end, ask yourself if your need to pass safety net out weighs your desire to double tap. If you use android pay, probably not...
iamjimmy said:
Thanks so much for the reply.
Could you please provide instruction steps to install Xposed and status bar sleep module? I always get confused on whether Xposed needs to be installed through magdisk or not?
Thanks in advance.
Click to expand...
Click to collapse
"The Flash" has an awesome guide on how to get your phone set up. It's right here on XDA under our device. After you get magisk installed, look for the systemless Xposed module under downloads in the magisk app. Click on it and there will be a link for the Xposed apk that goes with the systemless version. Just make sure you have a backup, or factory image, or a way to recover your phone in case of a booboo. Hope this could help; there is some really nice tools & guides here on XDA under our phone's forum.
CyberpodS2 said:
Before you jump into the deep end, ask yourself if your need to pass safety net out weighs your desire to double tap. If you use android pay, probably not...
Click to expand...
Click to collapse
Thanks for responding.
I was thinking of setting up a dual partition with one slot rooted and the other non-rooted. So when I need to access android pay (or any other safety net app), I can just reboot and switch to the non-rooted slot. So after flashing factory img on both slots, flash magdisk+kernel of one slot and let the other not have magdisk.
Anyway, I think I would use the double tap lockscreen feature way more than I use Android pay. It also saves a lot of battery life. I'll search here for guide to install Xposed Modules? Is there anything specific for the Pixel 2 XL?
iamjimmy said:
Thanks for responding.
I was thinking of setting up a dual partition with one slot rooted and the other non-rooted. So when I need to access android pay (or any other safety net app), I can just reboot and switch to the non-rooted slot. So after flashing factory img on both slots, flash magdisk+kernel of one slot and let the other not have magdisk.
Anyway, I think I would use the double tap lockscreen feature way more than I use Android pay. It also saves a lot of battery life. I'll search here for guide to install Xposed Modules? Is there anything specific for the Pixel 2 XL?
Click to expand...
Click to collapse
there is a magisk version of xposed that you can switch off with a reboot. just an FYI since using it is probably easier than trying to dual boot
Samuel Holland said:
"The Flash" has an awesome guide on how to get your phone set up. It's right here on XDA under our device. After you get magisk installed, look for the systemless Xposed module under downloads in the magisk app. Click on it and there will be a link for the Xposed apk that goes with the systemless version. Just make sure you have a backup, or factory image, or a way to recover your phone in case of a booboo. Hope this could help; there is some really nice tools & guides here on XDA under our phone's forum.
Click to expand...
Click to collapse
Thank you. I already have Kernel, Magdisk etc installed. I was looking for instructions for the Xposed Module specifically and did not find a guide for that.
So basically after installing the Xposed Module from within magdisk, just installed Status bar to sleep? Is it as simple as that?
And for next month, while dirty flashing to the new factory images, can this module be uninstalled so that one is close to stock before flashing away? Thanks in advance.
slothdabski said:
there is a magisk version of xposed that you can switch off with a reboot. just an FYI since using it is probably easier than trying to dual boot
Click to expand...
Click to collapse
Oh Really? That is great. Do you know how to install this version? Thanks.
iamjimmy said:
Oh Really? That is great. Do you know how to install this version? Thanks.
Click to expand...
Click to collapse
the magisk module is in the mgisk manager repo. flash it, then install this xposed apk https://forum.xda-developers.com/attachment.php?attachmentid=4337506&d=1511193653
info from this thread https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Or use the Nova Launcher which has an option for double tap to sleep.
slothdabski said:
the magisk module is in the mgisk manager repo. flash it, then install this xposed apk https://forum.xda-developers.com/attachment.php?attachmentid=4337506&d=1511193653
info from this thread https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Click to expand...
Click to collapse
I was able to uncheck the module in Xposed installer and did reboot. But this does not help with Safety net. Maybe I'm doing something wrong.
I Installed XposedInstaller_3.1.4_Magisk.apk. From Magisk Manager modules installed Xposed Framework SDK 27.
Could not install StatusBarSleep from XposedInstalled since it force closed when I tried to install. So installed the module through the Xposed repository on the internet.
However if I uncheck the module in Xposed installer and uncheck Xposed framework in Magisk - and reboot. After doing this, still don't pass Safety net check.
Could you please tell me what I'm doing wrong. Thank you.
dvsk69 said:
Or use the Nova Launcher which has an option for double tap to sleep.
Click to expand...
Click to collapse
I use the Nova Launcher and double tap to sleep. But I really wanted double tap on lockscreen. This does NOT work in Nova Launcher. The double tap action only works in the launcher..
did u ever get this working or did you have to goto a custom rom?
Below two apps can help you:
https://play.google.com/store/apps/details?id=com.redmanit.lockscreen
https://play.google.com/store/apps/details?id=com.jordigordillo.dtswidget
Hello,
I was wondering if there was a way to enable the Advanced Power Menu in MIUI 11 on Android P allowing you to quickly reboot to bootloader, fastboot, recovery for instance.
I know I can do that from MIUI update screen or if rooted from Magisk Manager module page, however that option is very handy to quickly reboot to what we want.
That option used to be in the developer options, but it is not there anymore. Maybe it is hidden somewhere?
Or would you know any other way to enable it?
Thanks in advance,
Regards.
Use Magisk+EdXposed+Customiuizer
kekesed97 said:
Use Magisk+EdXposed+Customiuizer
Click to expand...
Click to collapse
So no built-in solution to your knowledge not requiring to use Xposed for it?
Thanks.
Muad.Dib said:
So no built-in solution to your knowledge not requiring to use Xposed for it?
Thanks.
Click to expand...
Click to collapse
No built-in solution AFAIK. You still need a root for that.
There is a magisk module out there that do that thing, but I forget that module.
Or mod your systemui, but that will take some time.
Another alternative is use Reboot Xtream, small apps that do its job. But still, it requires root.
Just received the update to Android 11. MIUI version is V12.0.1.0.RJSEUXM. If you want to update go to Settings > MIUI Version > Update settings and check receive updates early' (Note this is a beta build).
Alternatively, can be found here: https://xiaomifirmwareupdater.com/miui/gauguin/
For me gesture navigation is broken. Swiping from any side has no effect. Anyone else have this?
tomb20 said:
For me gesture navigation is broken. Swiping from any side has no effect. Anyone else have this?
Click to expand...
Click to collapse
Android 11 screwed up system gesture navigation in 3rd party launchers (again). I've just returned to 3 button nav bar + edge gestures app. Now I have the best out of both worlds. Quick and easy to use nav bar and also swipe gestures.
_mysiak_ said:
Android 11 screwed up system gesture navigation in 3rd party launchers (again). I've just returned to 3 button nav bar + edge gestures app. Now I have the best out of both worlds. Quick and easy to use nav bar and also swipe gestures.
Click to expand...
Click to collapse
Thanks, I had tried setting the stock launcher to check if this was the case to no avail. Evidently I hadn't opened the home screen to let it load. Now have it working with no custom launcher and very slow animations... Hope MIUI can fix this soon.
tomb20 said:
Thanks, I had tried setting the stock launcher to check if this was the case to no avail. Evidently I hadn't opened the home screen to let it load. Now have it working with no custom launcher and very slow animations... Hope MIUI can fix this soon.
Click to expand...
Click to collapse
I find stock animations very slow too (be it "clean" Android or MIUI) - enabling 0.5x speed for all animations in developer settings feels much snappier.
Btw. it's not a fault of MIUI, this time Google is to blame.
_mysiak_ said:
I find stock animations very slow too (be it "clean" Android or MIUI) - enabling 0.5x speed for all animations in developer settings feels much snappier.
Btw. it's not a fault of MIUI, this time Google is to blame.
Click to expand...
Click to collapse
Yeah I've since found other complaints of broken gesture navigation with third party launchers on Samsung devices. I guess hopefully it's either patched in upstream Android by Google or Xiaomi patch it within MIUI.
Unfortunately, the MIUI stock launcher and Recents doesn't respect the 0.5% animation speed setting!
I've also found that you can no longer change individual app dark mode settings. The app list is just empty, still respects any that were setup prior to the update though.
tomb20 said:
Yeah I've since found other complaints of broken gesture navigation with third party launchers on Samsung devices. I guess hopefully it's either patched in upstream Android by Google or Xiaomi patch it within MIUI.
Unfortunately, the MIUI stock launcher and Recents doesn't respect the 0.5% animation speed setting!
I've also found that you can no longer change individual app dark mode settings. The app list is just empty, still respects any that were setup prior to the update though.
Click to expand...
Click to collapse
I can't comment on stock launcher as I'm on Nova launcher, but recents screen seems to be snappy. I don't use it that often though, so maybe it's with 100% speed.
I can still change individual apps in dark mode - but only when the dark mode is active. It takes about 3 seconds for list of all apps to appear though, on the first sight the feature seems missing/broken.
The two main things I've noticed is the notification led is now bright enough to actually be useful.
And on poco launcher 2 if you keep pressing back to exit from an app or push the home button sometimes you get the apps icon appearing at the top left of the screen for a few seconds for some reason.
But if you switch to system launcher and back again this bug goes away until you restart the device.
How did you get beta rom via phone updater? How can I do that, it wont let me install manually the beta version of this rom
=Anderson= said:
How did you get beta rom via phone updater? How can I do that, it wont let me install manually the beta version of this rom
Click to expand...
Click to collapse
I got the android 11 update via OTA this morning so I presume its out of beta
=Anderson= said:
How did you get beta rom via phone updater? How can I do that, it wont let me install manually the beta version of this rom
Click to expand...
Click to collapse
How do you try to install it?
_mysiak_ said:
How do you try to install it?
Click to expand...
Click to collapse
Via phone updater, downloading the update onto the phone them manually chosing the file from phone in the updater
=Anderson= said:
Via phone updater, downloading the update onto the phone them manually chosing the file from phone in the updater
Click to expand...
Click to collapse
What does it do/say when you select the update zip file? Do you have unlocked bootloader?
_mysiak_ said:
What does it do/say when you select the update zip file? Do you have unlocked bootloader?
Click to expand...
Click to collapse
It says: "You cannot flash this stable rom"
Without any explanation
I don't
=Anderson= said:
It says: "You cannot flash this stable rom"
Without any explanation
I don't
Click to expand...
Click to collapse
Are you sure that you are flashing the same version of ROM as you have currently installed? You can use recovery update only from the very same region - Global or EU or China or Russia or another.
_mysiak_ said:
Are you sure that you are flashing the same version of ROM as you have currently installed? You can use recovery update only from the very same region - Global or EU or China or Russia or another.
Click to expand...
Click to collapse
Yes, I am 100% sure
I don't know what is the issue
=Anderson= said:
Yes, I am 100% sure
I don't know what is the issue
Click to expand...
Click to collapse
You might find the culprit with logcat - enable usb debugging, start "adb logcat" on the PC with the phone connected and run the update again. There should be an error message displayed with more details.
_mysiak_ said:
You might find the culprit with logcat - enable usb debugging, start "adb logcat" on the PC with the phone connected and run the update again. There should be an error message displayed with more details.
Click to expand...
Click to collapse
Okay thank you, I will post results when I do it
_mysiak_ said:
You might find the culprit with logcat - enable usb debugging, start "adb logcat" on the PC with the phone connected and run the update again. There should be an error message displayed with more details.
Click to expand...
Click to collapse
And I have one more problem. When I try to download latest update from phone updater it says that it cannot download updates and to try after 1 min or 2. I don't know if it's miui bug or problem with my phone specifically
_mysiak_ said:
Are you sure that you are flashing the same version of ROM as you have currently installed? You can use recovery update only from the very same region - Global or EU or China or Russia or another.
Click to expand...
Click to collapse
Hello, for some reason it is working now. It is currently updating. How can I later update from beta to stable, or is it already stable?