Develop Bugs

Unofficial TWRP 2.8.7.1

What is better than the standard CM Recovery:
You can flash another firmware (not the CM)
Normal backup data
You can easily flash the Root
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unlock the bootloader as on CM Wiki instructions
Puth the phone in bootloader mode
In the folder with fastboot put crackling-t0x1.img
Enter the following command:
Code:
fastboot -i 0x2970 erase recovery
then Enter
Code:
fastboot -i 0x2970 flash recovery crackling-t0x1.img
Disconnect the device from the USB and remove the battery. Then replace the battery and restart the device in recovery mode to verify the installation. To do this, hold down the "Volume Down" and "Power".
You can download crackling-t0x1.img from here
http://www91.zippyshare.com/v/60lfsDiR/file.html
Credits to 4PDA Members and especially to FindYanot for developing and allowing posting here
IT is NOT my Work

I've been using this for a while, working very good!
Great to make backups and test ROMs.

There is a problem - this recovery can not mount f2fs partitions

RaidonChrome said:
There is a problem - this recovery can not mount f2fs partitions
Click to expand...
Click to collapse
for my information : which system firmware can mount f2fs partitions?

Dior DNA said:
for my information : which system firmware can mount f2fs partitions?
Click to expand...
Click to collapse
Latest Cyanogen Mod 13 has Linux 3.10, so it should be able to mount f2fs just fine

RaidonChrome said:
Latest Cyanogen Mod 13 has Linux 3.10, so it should be able to mount f2fs just fine
Click to expand...
Click to collapse
thanks, then perhaps latest CM recovery will mount f2fs just fine as well.

Dior DNA said:
thanks, then perhaps latest CM recovery will mount f2fs just fine as well.
Click to expand...
Click to collapse
It does not, in fact it is broken even with ext4 currently

PLEASE HELP, something when wrong
RaidonChrome said:
It does not, in fact it is broken even with ext4 currently
Click to expand...
Click to collapse
Is this the reason why i can't install gapp on my wileyfoxswift and an error appear("e: unable to find partition size for '/recovery") every time i use the wipe.
i upgraded from 12.1 to
13.0-20160127-NIGHTLY-crackling and use the same for recovery but did not work so i installed TWRP and this error occurs -see pics
PLEASE HELP

AromaGapp not working in TWRP
TWRP not working in Aroma Gapp need fix (Aroma is best for me since i can customize install & will not replace CM stock files/app)
In the previous post, i was able to install twrp but i found out on many trial and error that open gapp aroma/full doesn't work both on cm12.1 and cm13.0 using TWRP. Also cm13.0 recovery will not work with open gapp aroma/full.
What works: (haven't tried all version)
On TWRP - i was able to use arm64-pico-6.0 on cm13.0 20160130
On CM Recovery - arm64-aroma-5.1 on cm12.1 20160107
This is based on my experience with the HELP of the awesome people in the forum. I just want to let you know and maybe it will be useful to other noobs like me

noob2016 said:
TWRP not working in Aroma Gapp need fix (Aroma is best for me since i can customize install & will not replace CM stock files/app)
In the previous post, i was able to install twrp but i found out on many trial and error that open gapp aroma/full doesn't work both on cm12.1 and cm13.0 using TWRP. Also cm13.0 recovery will not work with open gapp aroma/full.
What works: (haven't tried all version)
On TWRP - i was able to use arm64-pico-6.0 on cm13.0 20160130
On CM Recovery - arm64-aroma-5.1 on cm12.1 20160107
This is based on my experience with the HELP of the awesome people in the forum. I just want to let you know and maybe it will be useful to other noobs like me
Click to expand...
Click to collapse
Aroma compatibility with TWRP is listed on the Open G-Apps website.
Unfortunately this is the only TWRP we have available to us.

Tamarinde said:
Aroma compatibility with TWRP is listed on the Open G-Apps website.
Unfortunately this is the only TWRP we have available to us.
Click to expand...
Click to collapse
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma

Thanks
robin0800 said:
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma
Click to expand...
Click to collapse
That is great! i hope i can try i try it but sadly i send it back since the phone was just here for the upgrade. Anyway thanks for the reply here and on my other post.
Much appreciated

robin0800 said:
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma
Click to expand...
Click to collapse
Confirmed!!! It works... i used TWRP 3.0. Works on both aroma and pico. Thanks so much!!!!

There is a zip file and recovery. IMG file, any reason why?

image45 said:
There is a zip file and recovery. IMG file, any reason why?
Click to expand...
Click to collapse
The .img file can be flashed by fastboot.
The zip file by any non stock recovery
and yes I do know the image file is contained in the zip but some people may not

robin0800 said:
The .img file can be flashed by fastboot.
The zip file by any non stock recovery
and yes I do know the image file is contained in the zip but some people may not
Click to expand...
Click to collapse
Yes i downloaded the zip file, extracted the recovery.img then flashed by fastboot. I am used to using fastboot commands
So the zip file would function as an update file via a non stock recovery, however once installed would replace the non stock recovery with twrp version!

[Un-Official][RECOVERY][NITROGEN] TWRP 3.2.2-0 for Mi Max 3

Team Win Recovery Project
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
Read more about TWRP here: https://twrp.me/about/
Bugs
1:-encryption don't work
DOWNLOAD:
TWRP
*note always download the latest twrp in the folder
Flashing Guide
1:- Unlocked Boot-loader is required.
2:- Download TWRP recovery .img file compatible with your device and save to a separate folder on your PC.
3:- Setup ADB and Fastboot on your PC.
4:- Enable USB debugging on your device.
5:- Open the folder where you saved TWRP Recovery .img file in Step 2 above.
6:- Now open a command window inside that folder. To do that, “Shift + Right click” on any empty white space inside the folder and then select “Open command window here” from the context menu.
7:-Connect your device to the PC. And type the following into the command adb reboot bootloader
8:-Once your device boots into bootloader mode, issue the following command into command window to flash the TWRP recovery .img file fastboot flash recovery recovery.img
9:-Once TWRP is successfully flashed on your device, issue the following command to reboot fastboot reboot
Note:- THIS IS ONLY A TESTING RELEASE SO MANY THING CAN BE BROKEN.​THIS IS MADE DIRECTLY FROM SOURCE NOT PORTED​
XDA:DevDB Information
TWRP-NITROGEN, Tool/Utility for the Xiaomi Mi Max 3
Contributors
ROMFACTORY, yshalsager
Source Code: https://github.com/minimal-manifest-twrp
Version Information
Status: Testing
Created 2018-07-29
Last Updated 2018-08-05

Update 31-07-2017
Added Crypts
So Encryption Should Works
Updated 02-08-2018

another reserved

Wow..u already buy mi max 3? How about ur max1?

raymondsanusi said:
Wow..u already buy mi max 3? How about ur max1?
Click to expand...
Click to collapse
i have all 3

Thanks, will test it now and revert
-works fine with magisk 16.7
-seems to be finicky with encryption

@ROMFACTORY i'm really happy that you come for the development of mi max 3, very satisfied with your work on hydrogen ? cordially

Thank for share .Waiting 360h

wow nice so fast ,still waiting for mi max to be available at my country.

Thanks for the work. Gonna try this now.

< DELETED >

ugene1980 said:
Thanks, will test it now and revert
-works fine with magisk 16.7
-seems to be finicky with encryption
Click to expand...
Click to collapse
really ? encryption is not yet enabled i have disabled it
can u plz post some ss

ROMFACTORY said:
really ? encryption is not yet enabled i have disabled it
can u plz post some ss
Click to expand...
Click to collapse
Sure, what SS do you need?
Managed to root both miui 9.6.7 stable and 8.7.26 dev (miui10) by flashing Magisk 16.7 via TWRP
For encryption, i just clicked cancel when it asks for password/key
Also, flashing xiaomi.eu rom leads to bootloop, not sure if due to xiaomi.eu or TWRP

ugene1980,
Did you try Magisk 16 Stable with it?
Does it works ?

kelvintisw said:
ugene1980,
Did you try Magisk 16 Stable with it?
Does it works ?
Click to expand...
Click to collapse
Didnt try, doubt it would, 16 doesnt support treble enabled xiaomi roms

I see. Okay. Will use the Beta later when my unlocked is approved.
Thank.

Now I waiting for 15 days to unlock bootloader first. After that i will test your TWRP.
Just 10 days left.

ugene1980 said:
Sure, what SS do you need?
Managed to root both miui 9.6.7 stable and 8.7.26 dev (miui10) by flashing Magisk 16.7 via TWRP
For encryption, i just clicked cancel when it asks for password/key
Also, flashing xiaomi.eu rom leads to bootloop, not sure if due to xiaomi.eu or TWRP
Click to expand...
Click to collapse
u can try the latest recovery and send some screenshots of the recovery
i have updated it recently u can try it should work fine

ROMFACTORY said:
u can try the latest recovery and send some screenshots of the recovery
i have updated it recently u can try it should work fine
Click to expand...
Click to collapse
I still see the same Jul 29th version on your AFH
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For some strange reason... i never had to wait to unlock on my last three xiaomis (redmi note 4x, mix2, max3)

ugene1980 said:
I still see the same Jul 29th version on your AFH
For some strange reason... i never had to wait to unlock on my last three xiaomis (redmi note 4x, mix2, max3)
Click to expand...
Click to collapse
are u porting team group or higher moderator etc in MIUI forum??
no need to wait to unlock bootloader

[ROM] XIAOMI.EU ROMS - Stable and Weekly released

XIAOMI.EU started uploading xiaomi.eu ROMs For Mi Mix 3
Stable Release from here https://xiaomi.eu/community/threads/miui-10-0-10-1-stable-release.47170/
Weekly Builds from here https://xiaomi.eu/community/forums/miui-rom-releases.103/
TWRP Recovery as per xiaomi.eu is https://androidfilehost.com/?fid=11410963190603869442
also its uploaded inside the shared links above
Installation procedure - 2nd post
Enjoy

Just few hours i got my bootloader unlocked. i did the installation and everything is working fine except one thing which is the magisk , the 18.0 version couldn't be installed. i keep 17.1 , Full screen is fine and no issue. the twrp is done and no more going to stock recovery.
my installation was :
1. unlocking bootloader
2. installation of twrp via fastboot.
3. reboot while pressing the volume up to reach recovery.
4. switch recovery language to english
6. format data from wipe.
7. reboot to recovery from reboot menu of twrp.
8. copying the rom file 8.12.7 to the internal storage
9. installing the rom.
10.reboot.
after finishing wizards and configure google account reboot again and install the magisk 17.1
Enjoy

Please give us complete guide to install, from unlock to final installation

I believe in we should have unlocked bootloader, then using fastboot to flash the twrp recovery -i had November 24 build-
Factory reset via twrp and installation of this build.
Myself i need around 3days to get my bootloader unlocked and install it. Maybe newer build will be available.

Work like a charm[emoji41]
And Google assistant on the AI press Button !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Envoyé de mon MIX 3 en utilisant Tapatalk

croisade said:
Work like a charm[emoji41]
And Google assistant on the AI press Button !View attachment 4661926
Envoyé de mon MIX 3 en utilisant Tapatalk
Click to expand...
Click to collapse
Happy to hear this.. awaiting my bootloader unlocking....:good:

Do not wipe the system partition before flashing the ROM. And you should come from a MIUI ROM.
I installed it via the following steps:
- Flash fastboot factory dev ROM 8.11.8 from here: http://www.miui.com/shuaji-393.html (flash_all.sh)
- Validate that the Device boots
- Flash TWRP Recovery "recovery-TWRP-3.2.3-1205-XIAOMI_MIX3-CN-wzsx150.img"
- Reboot and hold volume up until you get into the Recovery menu. Mostly the device will reboot 2 times here.
- Download and push the xiaomi.eu ROM to the device via "adb push xiaomi.eu_multi_MIMix3_8.11.30_v10-9.zip /sdcard/xiaomi.eu_multi_MIMix3_8.11.30_v10-9.zip"
- Flash the zip and reboot
- Enjoy

croisade said:
Work like a charm[emoji41]
And Google assistant on the AI press Button !
Envoyé de mon MIX 3 en utilisant Tapatalk
Click to expand...
Click to collapse
Had u problem with fingerprint or pattern?

PeppeCNN said:
Had u problem with fingerprint or pattern?
Click to expand...
Click to collapse
Works fine

andikicker said:
Do not wipe the system partition before flashing the ROM. And you should come from a MIUI ROM.
I installed it via the following steps:
- Flash fastboot factory dev ROM 8.11.8 from here: http://www.miui.com/shuaji-393.html (flash_all.sh)
- Validate that the Device boots
- Flash TWRP Recovery "recovery-TWRP-3.2.3-1205-XIAOMI_MIX3-CN-wzsx150.img"
- Reboot and hold volume up until you get into the Recovery menu. Mostly the device will reboot 2 times here.
- Download and push the xiaomi.eu ROM to the device via "adb push xiaomi.eu_multi_MIMix3_8.11.30_v10-9.zip /sdcard/xiaomi.eu_multi_MIMix3_8.11.30_v10-9.zip"
- Flash the zip and reboot
- Enjoy
Click to expand...
Click to collapse
With or without unlocking the bootloader?

Iluminatus23 said:
With or without unlocking the bootloader?
Click to expand...
Click to collapse
unlocked bootloader

i can confirm this works i would wipe data before installing as i causes issues with camera not being able to locate storage to save

Magisk 18 doesnt work, 17.3 is working, SafetyNet check - Success
Adaway - Copying of hosts file failed. Fixed, i am not sure is it because of Magisk/Settings/Systemless hosts, or restart cpl of time. But now its working.
Bluetooth cant find my Amazfit watch.
MGC 6.1.021 MI8 V1d - works perfectly
Those are bugs I am facing after install.

OK Google word is working? Even with screen off?

I get this error
D:\Download\MiMIX3\perseus_images_8.11.8>fastboot getvar product 2>&1 | findstr /r /c:"^product: *perseus" || echo Missmatching image and device
how can i do? it's the first time. image of perseus is correct

mastercut said:
I get this error
D:\Download\MiMIX3\perseus_images_8.11.8>fastboot getvar product 2>&1 | findstr /r /c:"^product: *perseus" || echo Missmatching image and device
how can i do? it's the first time. image of perseus is correct
Click to expand...
Click to collapse
What you trying to do? Install TWRP?

Mackay53 said:
What you trying to do? Install TWRP?
Click to expand...
Click to collapse
No Iwas flashing the fastboot rom 8.11.8
now i'm on stable 10.0.12.0

mastercut said:
No Iwas flashing the fastboot rom 8.11.8
now i'm on stable 10.0.12.0
Click to expand...
Click to collapse
You shouldn't need to flash that, worked fine for me not being on 8.11.8.
Boot TWRP
Wipe data/dalvik
Install EU zip
Factory reset
Reboot

Mackay53 said:
You shouldn't need to flash that, worked fine for me not being on 8.11.8.
Boot TWRP
Wipe data/dalvik
Install EU zip
Factory reset
Reboot
Click to expand...
Click to collapse
cannot boot in recovery

Mackay53 said:
You shouldn't need to flash that, worked fine for me not being on 8.11.8.
Boot TWRP
Wipe data/dalvik
Install EU zip
Factory reset
Reboot
Click to expand...
Click to collapse
what are the diferences to the China rom? Can someone paste few screenshots

[ROM][11][TREBLE][UNOFFICIAL] crDroid v7.8 for the Nokia 8

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Working features:
It boots
WiFi
Bluetooth
Navigation keys
Fingerprint
Camera
Headphones
Ringtones
Bluetooth audio
Selinux enforcing
NFC
4K video
Hotspot
Known issues:
You tell me
Flashing Instructions
Pre-installation
T-Virus (Download here)
TWRP (Download from here)
NikGapps (Download from here)
First time installation
Backup your device data to a PC or OTG flash drive.
Flash T-Virus with NOST and reboot to recovery.
Download and copy crDroid and TWRP zip to the Internal Storage and flash them in that order.
Format userdata and reboot to recovery to swich to the updated slot.
Flash NikGapps and wipe the Dalvik Cache (or else the system will not boot).
Reboot to system and enjoy.
Installing from previous release
Backup your data to PC, OTG flash drive.
Reboot to recovery, copy crDroid and TWRP zip to the Internal Storage and flash them in that order.
Reboot to recovery to swich to the updated slot and flash Gapps.
Reboot to system
Troubleshooting
When flashing the ROM in TWRP, it fails at Step 2
To fix this, flash any TWRP >= v2.4 which contains a fix for slot switching
After flashing TWRP v2.x the folders have weird names and I cannot copy stuff to the internal storage
You forgot the format userdata before rebooting.
The GSI in T-Virus is A10 and uses software encryption. My TWRP builds use hardware based decryption blobs which
are incompatible with software encrypted userdata. My ROM uses hardware encryption so that is not a problem.
But when you do not format data and install TWRP v2.x then it cannot decrypt the userdata created by A10 GSI.
So always format data before installing TWRP v2.x releases
Sources
ROM: https://github.com/GPUCode/OTA/releases/
Device tree: https://github.com/GPUCode/android_device_nokia_nb1
Common tree: https://github.com/GPUCode/android_device_nokia_msm8998-common
Vendor tree: https://github.com/GPUCode/proprietery_vendor_nokia
Kernel: https://github.com/GPUCode/android_kernel_nokia_msm8998
Visit official website @ crDroid.net
crDroid Community Telegram
Contributors
THMSP, OneWayGamer, oaid
Source Code: https://github.com/crdroidandroid
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2020-11-26
Last Updated 2021-05-31

Some screenshots

That was fast...
T-virus of yourself (2020) I believe... Correct me if I'm wrong.

You can use any T-Virus you like. My own though contains an updated TWRP version which supports ROM flashing. If you use any older one, it is necessary to flash my new TWRP releases before you atempt to flash the ROM.

Problem I Faced
Youtube won't start
Play store glitch
Apps like careem,uber won't show map

sdbadshah said:
Problem I Faced
Youtube won't start
Play store glitch
Apps like careem,uber won't show map
Click to expand...
Click to collapse
These issues are being investigated, possible fix has been found, wait the update by dev.

Magisk
After Installing Magisk My Device Stuck on Boot

sdbadshah said:
After Installing Magisk My Device Stuck on Boot
Click to expand...
Click to collapse
Same magisk caused bootloop.
Installed per instructions, wifi and sim do not work as well. Nokia 8 TA-1012

sdbadshah said:
After Installing Magisk My Device Stuck on Boot
Click to expand...
Click to collapse
Just tested on my phone, and Magisk works fine without causing any bootloops. What version are you flashing? You need to use version v21.0 and higher which supports Android 11
redhotdarkdevil said:
Same magisk caused bootloop.
Installed per instructions, wifi and sim do not work as well. Nokia 8 TA-1012
Click to expand...
Click to collapse
It is most probably a hardware problem with your device. All of my testers never reported Wi-Fi/SIM issues except Dual SIM. Does Wi-Fi work for you on stock ROM or in any other ROM?

Can u share the link of magisk u r using?

sdbadshah said:
Can u share the link of magisk u r using?
Click to expand...
Click to collapse
I recommend downloading the most recent version from the official releases: https://github.com/topjohnwu/Magisk/releases

New release is up! Download from here: https://github.com/GPUCode/android_device_nokia_nb1/releases/tag/v7-2
* VoLTE really works now
* Built in userdebug mode so the system should feel more responsive
* Fixed the in-call echo bug
* Play Store works now

emufan4568 said:
New release is up! Download from here: https://github.com/GPUCode/android_device_nokia_nb1/releases/tag/v7-2
* VoLTE really works now
* Built in userdebug mode so the system should feel more responsive
* Fixed the in-call echo bug
* Play Store works now
Click to expand...
Click to collapse
How To Updat just Flash It Through TWRP Or Have To INstall From Beginning?

sdbadshah said:
How To Updat just Flash It Through TWRP Or Have To INstall From Beginning?
Click to expand...
Click to collapse
Flash new TWRP so you can update without having to repeat the whole process.

Arashone said:
Flash new TWRP so you can update without having to repeat the whole process.
Click to expand...
Click to collapse
Ok So Just Flash The New TWRP Then Flash Os RIght?

sdbadshah said:
Ok So Just Flash The New TWRP Then Flash Os RIght?
Click to expand...
Click to collapse
That should be it. It would be nice if we hear a report back from you.

Do these instructions/ROM work on TA-1052?

Married To Christ said:
Do these instructions/ROM work on TA-1052?
Click to expand...
Click to collapse
Nokia 8 hardware is unique. It's Google that differentiate them. So, yes.

Excellent work, but the play store does not install apps larger than 500MB (if it "downloads", but does not install), I tried reinstalling nikgapps, clearing cache and google app data and nothing.

TlalocC said:
Excellent work, but the play store does not install apps larger than 500MB (if it "downloads", but does not install), I tried reinstalling nikgapps, clearing cache and google app data and nothing.
Click to expand...
Click to collapse
The issue has been fixed with a patch, wait for new build or if yoou need to install a patch it's available on tg

I have Installed Pubg after servel time its obb got delleted when i try to reinstall it does not install

Development [ROM][12.0][Stable][FEB] Pixel Experience 12 for OnePlus 9 Pro [UNOFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is this?​PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)​​Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device​​Based on Android 12​​What works?​Pretty much everything.​​Known issues​You tell me​​DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED​​Donate​Here​​Translation​Help with project translation​​Stay tuned​Our blog​Download Link for OnePlus 9 Pro​ROM​Recovery (Boot.img)​Device Chat​
INSTRUCTIONS​Make sure you are on latest OOS 11 (11.2.10.10)​Reboot to bootloader​Flash the provided boot.img​Reboot to recovery​Format data in the recovery​ADB sideload PixelROM.zip​Reboot ​​
Android OS version: 12​
Security patch level: FEB 2022​
Kernel Source code: Link​
Trees Sources :
8350-common
Lemonadep​
Source code : https://github.com/PixelExperience​
ROM Developer: YouLop09​
​
Special thanks to:​Chandu, Edward, Karthik, vjs pranav.​​

Finally. Hope this goes official. Nice job!

Need to have Bootloader unlocked or not.
Thank u so match

dariodamico said:
Need to have Bootloader unlocked or not.
Thank u so match
Click to expand...
Click to collapse
Yes, you need to have it unlocked

Wow this is incredible!
But i am noob in the new style of flashing custom roms, when i saw a videotutorial i will flash it

adrisanfe said:
Wow this is incredible!
But i am noob in the new style of flashing custom roms, when i saw a videotutorial i will flash it
Click to expand...
Click to collapse
You must be on A11 OOS or any custom rom A11 OR A12. Doesn't matter.
Steps what I did and how I install the rom and root.
Steps:
1. Go to bootloader and use following cmd: fastboot flash boot filename.img (provided by the developer in the 1post recovery.img)
2. Go to option in bootloader and use volume key to choose the reboot to recovery.
3. Once you are in recovery, go to factory format and click factory format data wipe. It will wipe you internal and external storage with formatting data meaning you will lose everything.
4. Go to Apply Update and use following cmd: adb sideload romname.zip and click entre, it will take 10 to 12 mins depending.
5. Once install successfully reboot to system and enjoy the rom.
Steps for root what I used instead of using payload and extracting boot.img. Easy steps root successful.
1. Once you are booted into system successfully and stepup everything as you would.
2. Go to bootloader by holding down volume down and power button. You will enter bootloader menu.
3. You CANNOT root your phone with given recovery in the first post. So, what I did I use the recovery img from DrepFest rom, it's build for A12 it should be safe to use. TWRP is compatible with A12 as of right now.
4. Go to bootloader use cmd: fastboot flash boot DrespFest recovery.img and click enter and reboot to recovery.
5. Now you will entre DrespFest recovery A12.
6. Go to Apply update and use following cmd: adb sideload rootfilename.zip (it's magisk 23). It will root your phone with Magisk 23, but you can update Magisk 24.1 manually without issues.
I have attached Magiosk 23. It can be sideload through recovery of LOS recovery or DrespFest recovery.
Enjoy rom and root.

Congrats brother! Looks good!

Any chances to non-gapps build?

Will try this later, congrats!

Is there anyway to get call recording in this ROM . Thanks

dariodamico said:
Is there anyway to get call recording in this ROM . Thanks
Click to expand...
Click to collapse
not for now

Will it work if I dirty flash from Drespfest A12 to PixelExperience?

vipinpvarghese said:
Will it work if I dirty flash from Drespfest A12 to PixelExperience?
Click to expand...
Click to collapse
Yes

Warrkill said:
Any chances to non-gapps build?
Click to expand...
Click to collapse
No, Pixel Experience always have gapps.

Any chance to non pro ,just OnePlus 9

xarcom said:
Any chance to non pro ,just OnePlus 9
Click to expand...
Click to collapse
soon

ROM looks great, UI is beautiful. Unfortunately, it drains my battery drastically it might be time for a phone upgrade.

pls help I'm having error with ads Sideload gives me "failed to find updated binary META-INf" pls help
edit: sorted it out, Safari extracting the zip file right after the download of the rom and recompiling it gives error so I used chrome to dl and it is going all good

Tried this this morning for a short time, runs really well and feels amazing however once I turned off wifi I could not get it to turn back on.
Whenever I tried it would crash the system and ask to close the ui.
Reverted back to stock before I had to take to go to work

kevrae said:
Tried this this morning for a short time, runs really well and feels amazing however once I turned off wifi I could not get it to turn back on.
Whenever I tried it would crash the system and ask to close the ui.
Reverted back to stock before I had to take to go to work
Click to expand...
Click to collapse
Just a little off-topic, there is a tutorial somewhere of how to go back to stock?