Develop Bugs

Weird bootloader behavior ... please help !!

Hello guys am basically a Noob when it comes to the new android 6.0+ security system that google included which changed the bootloader unlocking and rooting process a lil bit from the standert ( fastboot oem unlock ... fastboot flash twrp ... flash super su and voila )
let's get to my probleme with my nexus 5x when i unlocked the bootloader with the tool the device has to reboot but everytime i reboot i have to unlock my bootloader again the root works fine but the bootloader keeps getting locked everytime ... problem is that i messed with the boot img in order to disable forced encryption and now i can't flash stock because during the flashing the bootloader has to reboot and gets locked which make the flashing fails ... am on android nougat 7.0 if that matter and if someone have the 6.0.1 (mtc20k) boot image for noforce encrypte please share with me and thanks

You can update manually by flashing the different parts separately using fastboot commands. That way you can skip rebooting after flashing bootloadet
Skickat från min Nexus 5X via Tapatalk

I have the same problem. Bootloader gets relocked every time i reboot. Could not install cm14.1, i just get i bootloop (tried with latest twrp and vendor). Went back to stock with the seperate fastboot commands. It works but really annoying that the bootloader wont stay locked. It worked before i sent the phone to service (emmc problem) and got the motherboard changed. Is there a problem with the bootloader or is it a hardware problem?

Sounds like a HW problem, RMA it again.

RusherDude said:
Sounds like a HW problem, RMA it again.
Click to expand...
Click to collapse
Thanks!
Yeah thats what im thinking too. But what do i claim as the issue? Is a non unlockable bootloader a warranty issue? Bought it unlocked from a store.

frukten said:
Thanks!
Yeah thats what im thinking too. But what do i claim as the issue? Is a non unlockable bootloader a warranty issue? Bought it unlocked from a store.
Click to expand...
Click to collapse
Ask Google (you can open up a chat with them for example on https://support.google.com/nexus/answer/4582729?hl=en&ref_topic=6023296#contact=1 or other links), for me it's a clear issue, you have the right to unlock the bootloader, however not sure how to demonstrate a problem if you bought it on a store...

All phones that come back from service do so in that state. Seems it's a decision from LG. If you go to bootloader you'll probably see that is says "no rpmb" right after secure boot. This is what is causing the issue, from what I know it is because a certain portion is not flashed on the motherboard replacement
The same happend to me, e-mailed the service center asking why they did this but they never reply
Skickat från min Nexus 5X via Tapatalk

Pixel XL Stuck, Can't even get into recovery mode PLEASE HELP ME

It is stuck on a screen with the battery. I can get to bootloader mode but cannot get into recovery. Bootloader is locked... Please help
Basically I had the bootloader unlocked and it was rooted. I unrooted the phone and then I locked the bootloader and I am here now. Just wanted to make it go back to stock.

Is it a carrier model or a play store

https://forum.xda-developers.com/pixel-xl/how-to/psa-read-ca-bootloader-t3494615
This.

chapelfreak said:
Is it a carrier model or a play store
Click to expand...
Click to collapse
Google store

ASimpleSock said:
https://forum.xda-developers.com/pixel-xl/how-to/psa-read-ca-bootloader-t3494615
This.
Click to expand...
Click to collapse
I see the thread but it doesnt seem like theres a fix in it

tryfont said:
I see the thread but it doesnt seem like theres a fix in it
Click to expand...
Click to collapse
There probably isn't, if you've altered system and relock and toggle OEM unlocking off in dev. options you get bricked.

tryfont said:
It is stuck on a screen with the battery. I can get to bootloader mode but cannot get into recovery. Bootloader is locked... Please help
Basically I had the bootloader unlocked and it was rooted. I unrooted the phone and then I locked the bootloader and I am here now. Just wanted to make it go back to stock.
Click to expand...
Click to collapse
Did you try:
fastboot flashing unlock
Since you only relocked, you unlikely toggled "OEM unlock"?!
If it fails, I think you are SOL. Maybe someone with a proper solution will chime in. Otherwise, you have to RMA your device...
Good luck...

5.1 said:
Did you try:
fastboot flashing unlock
Since you only relocked, you unlikely toggled "OEM unlock"?!
If it fails, I think you are SOL. Maybe someone with a proper solution will chime in. Otherwise, you have to RMA your device...
Good luck...
Click to expand...
Click to collapse
It just says waiting for device and hangs there... I don't think it recognizes the phone
EDIT: IT WORKED!!!!!
It wouldnt recognize it and I ran fastboot continue and it just hanged there but I went into the bootloader mode and for like a quarter of a second it recognized it and forced it to boot

tryfont said:
It just says waiting for device and hangs there... I don't think it recognizes the phone
Click to expand...
Click to collapse
Open device manager in windows. Plug your phone and see how is your phone recognized.?!

5.1 said:
Open device manager in windows. Plug your phone and see how is your phone recognized.?!
Click to expand...
Click to collapse
Im on mac but its good now I edited my comment above. Only question is how to I completely clean the OS so I can relock bootloader without running into the same problem
This is whats happening to me- https://goo.gl/photos/2kv9Xo3HM3Mqn8AQ9

tryfont said:
Im on mac but its good now I edited my comment above. Only question is how to I completely clean the OS so I can relock bootloader without running into the same problem
Click to expand...
Click to collapse
Hey... Go into recovery and perform a factory reset.
Reboot bootloader and flash stock firmware. You could flash both slots to be sure your device is completely clean.
I wrote a how-to for someone having another issue. You.can follow this:
https://forum.xda-developers.com/showpost.php?p=71849370&postcount=28
When you are finished with flashing, reboot to be sure your system boot properly and your phone works as it should...
From here you can reboot into bootloader and issue:
fastboot flashing lock
If It was me I'd leave it unlocked though... Or at least OEM unlock enabled and ADB debugging ON. Since Google tend to release messed up OTA, you can always unlock the bootloader if needed.
But if you wish you can also disable the OEM unlock.
Good luck...

5.1 said:
Hey... Go into recovery and perform a factory reset.
Reboot bootloader and flash stock firmware. You could flash both slots to be sure your device is completely clean.
I wrote a how-to for someone having another issue. You.can follow this:
https://forum.xda-developers.com/showpost.php?p=71849370&postcount=28
When you are finished with flashing, reboot to be sure your system boot properly and your phone works as it should...
From here you can reboot into bootloader and issue:
fastboot flashing lock
If It was me I'd leave it unlocked though... Or at least OEM unlock enabled and ADB debugging ON. Since Google tend to release messed up OTA, you can always unlock the bootloader if needed.
But if you wish you can also disable the OEM unlock.
Good luck...
Click to expand...
Click to collapse
I'm pretty inexperienced with this kind of stuff and so you might have to explain it a bit further than what that link says. I did fastboot reboot bootloader in terminal but it can't find my device. Also I couldnt get into recovery when it was bricked so I probably still can't

tryfont said:
I'm pretty inexperienced with this kind of stuff and so you might have to explain it a bit further than what that link says. I did fastboot reboot bootloader in terminal but it can't find my device
Click to expand...
Click to collapse
Hey...
You boot into bootloader when the Device is powered off
Just like in your video: with power + volume down
You can see infos regarding:
Bootloader
Radio
S/N
DRAM
Boot-slot=
Etc...
This is the bootloader :good:
From here, unzip the google image you have downloaded, open the folder and from here run the flash-all script. Let your device reboot. Power it down, boot into bootloader again with power + volume down. Change active slot as I described in the link I gave you previously. Run the same flash-all again... Done!
Just for safety, remove your Google account before you continue. You'll add it again later...
Good luck...

5.1 said:
Hey...
You boot into bootloader when the Device is powered off
Just like in your video: with power + volume down
You can see infos regarding:
Bootloader
Radio
S/N
DRAM
Boot-slot=
Etc...
This is the bootloader :good:
From here, unzip the google image you have downloaded, open the folder and from here run the flash-all script. Let your device reboot. Power it down, boot into bootloader again with power + volume down. Change active slot as I described in the link I gave you previously. Run the same flash-all again... Done!
Just for safety, remove your Google account before you continue. You'll add it again later...
Good luck...
Click to expand...
Click to collapse
Alright thank you so much its doing the flashing right now. I really appreciate you helping...I was worried I'd have to get a replacement through google. Have a great day lad

tryfont said:
Alright thank you so much its doing the flashing right now. I really appreciate you helping...I was worried I'd have to get a replacement through google. Have a great day lad
Click to expand...
Click to collapse
Hey... Flash both slots... Just to be sure both are clean and nothing problematic​ remains on your device before locking your bootloader!
It could brick installing an OTA or whatever. Better restart 100% clean. :good:
Cheers...

Just flash the flash-all, relock and call it a day. Then you'll be fully stock and locked. I would however recommend rebooting once before locking to make sure its all good.

tryfont said:
It is stuck on a screen with the battery. I can get to bootloader mode but cannot get into recovery. Bootloader is locked... Please help
Basically I had the bootloader unlocked and it was rooted. I unrooted the phone and then I locked the bootloader and I am here now. Just wanted to make it go back to stock.
Click to expand...
Click to collapse
Hey man I have the same problem you can try calling Google support they can send you a replacement if you still have a warranty
my warranty has expired so I'm on my own

How to Lock Bootloader

Hello, I purchased a Pixel 3 XL off craigslist and it is working fine, but the bootloader is unlocked therefore I am receiving a warning when restarting the phone and Google Pay does not work. How can I re-lock the bootloader? Do I need to flash the latest standard google image? The build number is: "crosshatch-userdebug 9 PQ1A.181105.013 5027108 dev-keys". When in bootloader the bootloader version is: b1c1-0.1-5004167. Obviously a n00b here, please be gentle. Thank you for any help.

Do you have a computer? If so what OS do you use?
Sent from my Pixel 3 XL using Tapatalk

superchilpil said:
Do you have a computer? If so what OS do you use?
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I do have a computer, a Windows 10 Pro

Are you planning on rooting? If so, you can use Magisk Hide (after using Magisk to root of course) to get Google Pay to work. I would be hesitant to re-lock the BL unless you are certain that it is completely stock otherwise. Re-locking a modified phone can brick the device. Better to just learn how to root, etc and keep it unlocked. You have come to the right place to learn.

sliding_billy said:
Are you planning on rooting? If so, you can use Magisk Hide (after using Magisk to root of course) to get Google Pay to work. I would be hesitant to re-lock the BL unless you are certain that it is completely stock otherwise. Re-locking a modified phone can brick the device. Better to just learn how to root, etc and keep it unlocked. You have come to the right place to learn.
Click to expand...
Click to collapse
No, I don't plan on rooting. But I am afraid of bricking the phone since I don't know what has been done to it. Is there a way to determine what was done to unlock the bootloader? Otherwise I will follow your recommendation of using Magisk Hide. I would prefer to keep the phone stock. Thanks.

eec007 said:
No, I don't plan on rooting. But I am afraid of bricking the phone since I don't know what has been done to it. Is there a way to determine what was done to unlock the bootloader? Otherwise I will follow your recommendation of using Magisk Hide. I would prefer to keep the phone stock. Thanks.
Click to expand...
Click to collapse
If you live in Denver I'll trade you my Verizon one for yours. It has a locked bootloader.

eec007 said:
No, I don't plan on rooting. But I am afraid of bricking the phone since I don't know what has been done to it. Is there a way to determine what was done to unlock the bootloader? Otherwise I will follow your recommendation of using Magisk Hide. I would prefer to keep the phone stock. Thanks.
Click to expand...
Click to collapse
The two obvious things you can check are that you have stock recovery and that the phone is not rooted. Manually power on to bootloader (hold volume down and press power then use the volume keys to select recovery and press power. you should get a no command android screen if in stock recovery. assuming you don't have a Magisk icon, you are probably not rooted but you can confirm by installing and running a root app like root checker. likely, the previous owner did nothing but unlock the BL given how recently it came out, but if someone where really creative they could have done work in the other partition. there are no exploites, so doing it normally (running fastboot flashing unlock from a prompt) is pretty much all that would have been done other than enabling developer options and OEM unlocking in settings.
Personally, I think you have a good chance to learn your device, root (you need to be rooted for Magisk hide) and keep the bootloader unlocked. Besides rooting, being able to install a full factory image instead of an OTA is so much better in my opinion. The amount of work it would take to be 100% confident that the only thing done was the BL unlock would take as much work as at least getting a working knowledge of rooting and reinstalling the OS.
P.S. Keeping a phone "stock and rooted" has advantages. That is how I run my 3 XL and how I ran my OG XL. No custom OS. Not even a kernel.

coolhandz said:
If you live in Denver I'll trade you my Verizon one for yours. It has a locked bootloader.
Click to expand...
Click to collapse
lol, what I don't get is that I thought the google edition could have the bootloader unlocked in the developer options. So why go to this hassle of unlocking the bootloader from fastboot? FYI, in the Developer options the OEM unlocking is greyed out and says "Bootloader is already unlocked".

sliding_billy said:
The two obvious things you can check are that you have stock recovery and that the phone is not rooted. Manually power on to bootloader (hold volume down and press power then use the volume keys to select recovery and press power. you should get a no command android screen if in stock recovery. assuming you don't have a Magisk icon, you are probably not rooted but you can confirm by installing and running a root app like root checker. likely, the previous owner did nothing but unlock the BL given how recently it came out, but if someone where really creative they could have done work in the other partition. there are no exploites, so doing it normally (running fastboot flashing unlock from a prompt) is pretty much all that would have been done other than enabling developer options and OEM unlocking in settings.
Personally, I think you have a good chance to learn your device, root (you need to be rooted for Magisk hide) and keep the bootloader unlocked. Besides rooting, being able to install a full factory image instead of an OTA is so much better in my opinion. The amount of work it would take to be 100% confident that the only thing done was the BL unlock would take as much work as at least getting a working knowledge of rooting and reinstalling the OS.
P.S. Keeping a phone "stock and rooted" has advantages. That is how I run my 3 XL and how I ran my OG XL. No custom OS. Not even a kernel.
Click to expand...
Click to collapse
Thank you! Root Checker says that "root access is not properly installed on this device". The recovery mode screen just has a warning about the bootloader is unlocked and a link to a google help page. I figure that I can always unlock the bootloader again if I need to later, but for now I just want everything to work (bank and pay app) and not worry about updating anything myself. I think I may try fastboot to lock the bootloader for now. Thanks for all the help.

Hope it all works out for you. I assume you did a factory reset on the device since you got it used. Re-locking will do another factory reset.

sliding_billy said:
Hope it all works out for you. I assume you did a factory reset on the device since you got it used. Re-locking will do another factory reset.
Click to expand...
Click to collapse
Yeah, so I locked using "fastboot flashing lock" but then it doesn't start, saying that there is no operating system or something like that. I freaked out and was able to unlock again using "fastboot flashing unlock". Now all is wiped. I guess I need to flash the oem rom first, then lock. I'll have to do this all later tonight. Just glad that I didn't brick it yet.

eec007 said:
Thank you! Root Checker says that "root access is not properly installed on this device". The recovery mode screen just has a warning about the bootloader is unlocked and a link to a google help page. I figure that I can always unlock the bootloader again if I need to later, but for now I just want everything to work (bank and pay app) and not worry about updating anything myself. I think I may try fastboot to lock the bootloader for now. Thanks for all the help.
Click to expand...
Click to collapse
I haven't rooted or bl unlocked in some time now so if I make a mistake someone please correct me. After buying it from a 3rd party I'd wipe the device entirely. Download the correct image and install the latest platform tools for Windows (here) https://developer.android.com/studio/releases/platform-tools and make sure you can connect with adb devices and fastboot devices commands. Then extract the latest full image from here https://developers.google.com/android/images to your platform-tools directory and run the flashall.bat command if you wish to wipe the entire device and get rid of anything the previous owner might have "inadvertently" installed. (this is what I would do but not necessarily what you should do if you want to keep the current apps and system intact) This will reset your device and then you can lock the bootloader with no worry and you'll have a stock system.
I agree that since you can unlock it at any time and you don't need it now then relock it. But there are those here that disagree with me and fight with Magisk and OTAs constantly. But they are not noobs and know what they're doing. If you want to learn there is a wealth of information here so it's your call. Just my 2 cents. But please check my steps before you do anything that might cause issues.
edit: darn, sorry I just saw above that you already tried to lock it. I hope what I said to do will get you out of the predicament.

bobby janow said:
I haven't rooted or bl unlocked in some time now so if I make a mistake someone please correct me. After buying it from a 3rd party I'd wipe the device entirely. Download the correct image and install the latest platform tools for Windows (here) https://developer.android.com/studio/releases/platform-tools and make sure you can connect with adb devices and fastboot devices commands. Then extract the latest full image from here https://developers.google.com/android/images to your platform-tools directory and run the flashall.bat command if you wish to wipe the entire device and get rid of anything the previous owner might have "inadvertently" installed. (this is what I would do but not necessarily what you should do if you want to keep the current apps and system intact) This will reset your device and then you can lock the bootloader with no worry and you'll have a stock system.
I agree that since you can unlock it at any time and you don't need it now then relock it. But there are those here that disagree with me and fight with Magisk and OTAs constantly. But they are not noobs and know what they're doing. If you want to learn there is a wealth of information here so it's your call. Just my 2 cents. But please check my steps before you do anything that might cause issues.
edit: darn, sorry I just saw above that you already tried to lock it. I hope what I said to do will get you out of the predicament.
Click to expand...
Click to collapse
Your steps are basically what I will try tonight. Currently the phone is working again, so there was no harm done yet (just the restore of all apps and such). But I'm going to flash the oem image tonight and start all over again.

eec007 said:
Your steps are basically what I will try tonight. Currently the phone is working again, so there was no harm done yet (just the restore of all apps and such). But I'm going to flash the oem image tonight and start all over again.
Click to expand...
Click to collapse
One thing I would do before I relocked the bl would be to do the full login procedure, email everything other than apps. Then make sure you're on the Nov update in about phone, I'm sure you will be, and then fastboot relock the bl with the proper command. It will wipe the device again but it's a small price to pay for about 10 minutes of work. Then once it reboots and there is no more error message you'll be fully stock. Enable dev options again and make sure the oem switch is active allowing bl unlock. Then you're done. I've gotten to the point on my 5X where I even flip the oem switch so it can't be bl unlocked until I go in and flip it back. Dangerous if you're flashing stuff but not so much if you're just taking OTAs. That's of course your call entirely. Good luck.

eec007 said:
lol, what I don't get is that I thought the google edition could have the bootloader unlocked in the developer options. So why go to this hassle of unlocking the bootloader from fastboot? FYI, in the Developer options the OEM unlocking is greyed out and says "Bootloader is already unlocked".
Click to expand...
Click to collapse
That will stay grayed out until you relock the bootloader. That slider "allows" unlocking. Then you boot into fastboot and unlock it.
So you would reverse the process, hit fastboot and relock the bootloader. Then you can toggle the slider back to not allow unlocking.
Relocking the bootloader will wipe your phone.
You should not do this until you first flash the full factory image to make sure the phone is 100 percent stock. And if it were my phone I would wait for the next OTA update after flashing it back to stock to make sure it goes ok. Then lock it.
And then I would wait awhile before hitting the slider.
You are playing with fire here, if you mess it up and lock it and hit the slider you will not be able to fix it. And no offense, but since you have not done this all before on this phone chances are good you will mess it up.
So, flash to stock and leave it unlocked.
Then wait for the next OTA.
Then lock it.
Then wait a bit more before you hit the slider.
And remember, since you are not the original buyer you will not be able to warranty it.

eec007 said:
Hello, I purchased a Pixel 3 XL off craigslist and it is working fine, but the bootloader is unlocked therefore I am receiving a warning when restarting the phone and Google Pay does not work. How can I re-lock the bootloader? Do I need to flash the latest standard google image? The build number is: "crosshatch-userdebug 9 PQ1A.181105.013 5027108 dev-keys". When in bootloader the bootloader version is: b1c1-0.1-5004167. Obviously a n00b here, please be gentle. Thank you for any help.
Click to expand...
Click to collapse
They're right to mention that relocking a modified device can result in a brick.
Your best bet is to go to https://developers.google.com/android/images#taimen
Follow the directions to the "T", then relock it if you are really really sure that the unlock screen bothers you.
Would suggest to do this anyway, no matter future unlock status.

TonikJDK said:
That will stay grayed out until you relock the bootloader. That slider "allows" unlocking. Then you boot into fastboot and unlock it.
So you would reverse the process, hit fastboot and relock the bootloader. Then you can toggle the slider back to not allow unlocking.
Relocking the bootloader will wipe your phone.
You should not do this until you first flash the full factory image to make sure the phone is 100 percent stock. And if it were my phone I would wait for the next OTA update after flashing it back to stock to make sure it goes ok. Then lock it.
And then I would wait awhile before hitting the slider.
You are playing with fire here, if you mess it up and lock it and hit the slider you will not be able to fix it. And no offense, but since you have not done this all before on this phone chances are good you will mess it up.
So, flash to stock and leave it unlocked.
Then wait for the next OTA.
Then lock it.
Then wait a bit more before you hit the slider.
And remember, since you are not the original buyer you will not be able to warranty it.
Click to expand...
Click to collapse
I agree with most of your post other than waiting for the next OTA before you lock the bootloader. Why would he need to do that? If he's stock, and he'll see that immediately, then relock it. He doesn't want root or Magisk but only wants banking and Pay. With the slider allowing bl unlock he's in no danger whatsoever. Lock and relock whenever he wants. OTA will not disallow the slider once it's set.

TonikJDK said:
That will stay grayed out until you relock the bootloader. That slider "allows" unlocking. Then you boot into fastboot and unlock it.
So you would reverse the process, hit fastboot and relock the bootloader. Then you can toggle the slider back to not allow unlocking.
Relocking the bootloader will wipe your phone.
You should not do this until you first flash the full factory image to make sure the phone is 100 percent stock. And if it were my phone I would wait for the next OTA update after flashing it back to stock to make sure it goes ok. Then lock it.
And then I would wait awhile before hitting the slider.
You are playing with fire here, if you mess it up and lock it and hit the slider you will not be able to fix it. And no offense, but since you have not done this all before on this phone chances are good you will mess it up.
So, flash to stock and leave it unlocked.
Then wait for the next OTA.
Then lock it.
Then wait a bit more before you hit the slider.
And remember, since you are not the original buyer you will not be able to warranty it.
Click to expand...
Click to collapse
Thank you for explaining this. I had thought that the Developer Option slider was to unlock the bootloader, but your explanation clarifies it, the slider is to allow the bootloader to be unlocked...

Ok, so I tried to flash the factory image using adb flash-all and it keeps getting the error:
Sending sparse 'vendor_a' 2/2 (193888 KB) FAILED (Error reading sparse file)
Now the phone is not working at all and says that "device is corrupt" and will not boot past the white google screen. I can try again using adb, but it is the same error each time. I tried to download the image again and same sparse error. I can also fastboot in TWRP, but not sure what to do in there. What am I doing wrong? I guess I should've rooted and used Magisk like others have said.

turns out changing to a different cable resolved my sparse error and I was then successfully able to apply the factory image and lock the device. Thanks everyone for the help.

Bootloader locking not working

Op3, stock recovery and official 9.0.2 rom.
Eveything elese is fine but bootloader is unlocked and when starting phone the dm-verity says that bootloader is unlocked.
I can go to fastboot and command fastboot oem lock and phone Will show that yes and no screen, but even If I select yes phone just boots and shows that bootloader is still unlocked.
I can not fine any info for this kind of problem or how to solve this. Anybody has any ideas how to get bootloader locked?

Have you tried selecting no, instead of yes?
When I tried the first CB, I had something similar where, with the new bootloader, the responses were inverse.

morphvale said:
Have you tried selecting no, instead of yes?
When I tried the first CB, I had something similar where, with the new bootloader, the responses were inverse.
Click to expand...
Click to collapse
Yes I did try that also but did not work.
But I know figured a way to do that. I used the MSM Download tool program. That flashed some very old software but did not lock the bootloader (like I think it should do?) But after that fastboot oem lock worked. Then I sideloaded newest 9.0.2 and now bootloader is locked and phone is completely stock and works fine. So no idea what was wrong, but luckily there is this MSM.
I also found out that newest windows10 has the qualcomm 9008 drivers so no need to install them separately like the instructions says.

You probably used MSM with 3.2.8 or similar. Newer ones also lock the bootloader.

Pie 9.0.2 cannot lock the bootloader. Potentially a bug.
Works fine on 5.0.8; simply downgrade, lock and install Pie again

Unlock bootloader, Install Custom Recovery and Lock Again?

Hi everyone,
Well my doubt it's really simple as you can see.
I tried to search on forum and internet, but I didn't found nothing solid.
Only achism (Incluing Mi official Forum)
It's really simple to Lock/Unlock the bootloader on Mi 5s, a simple command on promt and it's DONE. You lose nothing, no need to flash NOTHING.
I heard about bootloop, but does it real? Anyone here already tried it?
Why Am I asking it?
Well, if my bootloader is unlocked, I dunno why, but even with magisk Applications can detect some incoherence in my smartphone.
Even passing all steps of SafetyNet, the apps detect.
I think it's some flag on build.prop or another option available on MIUI Rom (and ofc they will read it to check everything).
My GF has magisk and custom recovery (Unlock Boot) and the same apps don't detect on her phone and works normally. (I configured both)
So I would like to know if it's really possible use a Custom Recovery and Magisk and just block the Bootloader again...

If you have the original bootloader from the original rom you can lock it. If you don't, the phone will stop booting with lock and custom bootloader.

patoberli said:
If you have the original bootloader from the original rom you can lock it. If you don't, the phone will stop booting with lock and custom bootloader.
Click to expand...
Click to collapse
No. Even using stock ROM after unlock bootloader and Install TWRP and lock again we got a message "the system has been destroyed" on Mi 5/5s/5x.
It's a Soft Brick, but if anyone on future want to try it and before do it, found this post so, stay away.

TWRP = different bootloader.

patoberli said:
TWRP = different bootloader.
Click to expand...
Click to collapse
Read the post again and if you don't understand, read again.
Thank you.