tomtom and other compatibility wm6 - P3600 ROM Development

tomtom 6 working?
other apps problems?
thanks
fabri

Hi,
I've flash my trinity with last LVSW rom, all my applications till working on WM6....
No problem ;-)

thanks, any other test tomtom 6?
thanks, any other test tomtom 6?

TTN6 works perfectly on the Mun_rus ROM (and gets a fix from cold in under 2 minutes). Not tried the LVSW

NeilM said:
TTN6 works perfectly on the Mun_rus ROM (and gets a fix from cold in under 2 minutes). Not tried the LVSW
Click to expand...
Click to collapse
TOMTOM6 works perfect with LVSW Rom, GPS lock in 2 mins from cold start

could you please post your working tomtom 6 settings? I am having issues getting tomtom to find a GPS device!
Is the GPS port still com port 9? Is the baud rate still the same? Do we need to turn 'let windows manage my GPS settings off?
Have tried various combinations and still no luck
Thanks in advance,
WWWeed

hmmm, If I cant resolve this I going to have to downgrade back to WM5!
This is really annoying when I know other people HAVE it working..
Ahh well back to the shipped orange rom...........

In TomTom select "Built-in GPS receiver" it won't even ask you for a com port or baud rate.
This is only available in TomTom 6.03. If you have version 6.00 you need to select Other NMEA GPS receiver com port 9 and baud rate 4800 or 9600 (both worked for me)

Maybe: You must switch on phone part of mobile. When phone is off (Flight Mode) gps doesnt´ work.

Anyone have an upgrade for the p3600 to get WM6?
I've been searching the forum, but can't find what I'm looking for. Is it possible to upgrade the p3600 to a WM6 version?

Akselp3600 said:
I've been searching the forum, but can't find what I'm looking for. Is it possible to upgrade the p3600 to a WM6 version?
Click to expand...
Click to collapse
sure, read wiki http://wiki.xda-developers.com/

Akselp3600 said:
I've been searching the forum, but can't find what I'm looking for. Is it possible to upgrade the p3600 to a WM6 version?
Click to expand...
Click to collapse
dude, u totally out, forget wm6, u should flash a wm6.1 rom now.
try any one here, most of them are good.

sailer1983 said:
dude, u totally out, forget wm6, u should flash a wm6.1 rom now.
try any one here, most of them are good.
Click to expand...
Click to collapse
Just after I wrote the post I discovered the amazing wiki Found the AX3L wm6 rom. Works almost perfect. Do you know if there is anywhere to find a skin for the wm6 that works well?

Related

TomTom 3 on New Universal/Exec? Will it work?

Hi
Anyone any ideas as to whether tomtom3 which I have running happily on my 2i using 2003se will work when loaded onto the new o2 Exec using windows mobile 2005? Need to know before I decide to upgrade or stick with 2i........also any ideas if the port connector and the bottom of the 2i is different to the exec, again that changes the car kit connector too!! ahhhhhh!
Thanks all
Bryson
if you are out of luck finding people with both the universal and that tomtom thingy
i sugest you look if people with xda2i with 2005 and people with xda2 with 2005 can run it
if it run on those 2 2005 versions i would think it would run on the universal
No it doesn't work. I have Tom Tom 3 & 5 and neither of them will install.
It may have something to do with Activesync 4 which does things very different to versions 3.xx
I'd suggest waiting until Tom Tom annouce compatibility with WM 5 if I were you.
tom tom 5 works greaT
please check the other message boards for instructions on how install / workaround as4 by cab files. good luck with bt though.
Exec up and running with tomtom 5.1 and BT GPS..............wasnt easy! But running a treat, all we need now is a good car cradle!
bryson said:
Exec up and running with tomtom 5.1 and BT GPS..............wasnt easy! But running a treat, all we need now is a good car cradle!
Click to expand...
Click to collapse
hi can you email me a step by step guide ?
[email protected]
There is a thread that tells you all about it
Go to search and type Tomtom.
that's the way a forum works :wink:
You'll find it.
Re: There is a thread that tells you all about it
gpsenzo68 said:
Go to search and type Tomtom.
that's the way a forum works :wink:
You'll find it.
Click to expand...
Click to collapse
done that and could not find a how to thats why i asked for help.
http://forum.xda-developers.com/viewtopic.php?t=28386
That's the thread you want - had it as TT5 in the title
joebongo said:
http://forum.xda-developers.com/viewtopic.php?t=28386
That's the thread you want - had it as TT5 in the title
Click to expand...
Click to collapse
Thanks.

WM6 with BBConnect ?

Hi all !
Is there any flavour of cooked WM6 for Artemis which supports BlackBerry Connect ?
I really want to upgrade but it never worked for me so far ? Anybody from our great cookers are thinking on this ?
Warm regards,
baudy2 said:
Hi all !
Is there any flavour of cooked WM6 for Artemis which supports BlackBerry Connect ?
I really want to upgrade but it never worked for me so far ? Anybody from our great cookers are thinking on this ?
Warm regards,
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=294218
Read in this thread..!
Cheers..!
Nothing of interest there.
The only WM6 ROM to proved work with BlackBerry is the O2 German which is not good at all.
If you look/search further - you will notice that RIM has somehow managed to place a lock on BB conet to work ith only certain combination of device, radio etc...many have tried and failed, some had luck on their side...i was one of the unlucky ones...
awaiting the official o2 rom on wm6 - hopefull will resolve the issue - till then fingers crossed!

TT7 working

Hi,
Relating the ongoing discussions on other threads in the Kaiser and Diamond areas I tried the TT7 cab on the MDA Compact 3. Works fine but it is a big hit on storage memory (12mb).
Regards
Its easy solution.
Move folder "intern geheugen" on Sd memory
Hi,
Yes worked that out.
Tested it and it is okay but no real great innovations compared to TT6. Going to wait until I get a MDA C IV before moving over.
Regards
Which maps did you manage to get to work. cant get mine to work no matter where i put it.
V720 maps working OK-
cheers
???
tomtom 7 on artemis?
where did you get
want to test it , i am using igo 8 now
greetz
Hi,
Only used it with the city taster map which is free.
I believe you can buy a 720 map from Tom Tom which should work. I only have 675 map for TT6 which does not get recognised by TT7.
Hatchy,
Look in the Diamond or Kaiser areas, a number of threads there on where to get TT7.
Regards
Zecanilis said:
V720 maps working OK-
cheers
Click to expand...
Click to collapse
can you give us some manual how do it ??
no Warez sorry!
Hi,
Purchased a 720 map from TomTom.com and it works fine.
Regards
You can buy the V7 maps for the Go/One on TomTom.com. The everything should work.
i´ve installed tt7 and everyrhing is fine, i think this is a little bit faster than the previous one.
Tt7 installed on artemis
Hi
Just checking if the speed camera poi is working becos mine does not show up the speed cameras on move
Every thing works fine
Thanks
Can anyone update his/her maps with Mapshare? At the moment I'm not managing how to do it with TomTom Home.
I helped someone get it working on their Orbit and its working fine.
Only thing is, the GPS button doesn't work now. Does anyone know how to get it working?
go to start>>>>>settings>>>>>>>>personal>>>> buttons, change "Tom Tom navigator.exe" to the other "Tom Tom navigator" mentionded in the dropdownbox with out the .exe for button 1
that should fix it
Thanks will get them to try it. I didnt realise there was no exe for TT7..no wonder I couldnt find it!
just installed it
i will test it tomorow
i'll post my results
see you tomorow
memory problem tt7
I've got a p3300 with Artemis_Touch_3[1].01_full running
Storage memory free 42.71 and program memory free 19.05
TT7 Installed on my 2gig memorycard
Still got a problem with the memory when i try running TT7 somebody got a clue?
thanks Rob

Spb GPRS Monitor not working...

I just installed SPB GPRS Monitor, selected my GPRS connection from the settings/options panel in the program, pressed ok.
Opened up IE, to do a test view of a web page, but the monitor didn't/doesn't count any kilobytes being sent.
Any advice on how I can fix this, or does the monitor not work on our phones?
Thanks
silicuda said:
I just installed SPB GPRS Monitor, selected my GPRS connection from the settings/options panel in the program, pressed ok.
Opened up IE, to do a test view of a web page, but the monitor didn't/doesn't count any kilobytes being sent.
Any advice on how I can fix this, or does the monitor not work on our phones?
Thanks
Click to expand...
Click to collapse
we need to know:
Your rom, which version of the phone you have, and do you have any other software installed that might be casing a problem.
veyka said:
we need to know:
Your rom, which version of the phone you have, and do you have any other software installed that might be casing a problem.
Click to expand...
Click to collapse
Rom Version: CRCs r11.2
Radio Version: 1.40.30.00
Phone is a AT&T 8525
i dont have any other software installed to monitor the gprs, (nor any running in task manager).
Thx
silicuda said:
Rom Version: CRCs r11.2
Radio Version: 1.40.30.00
Phone is a AT&T 8525
i dont have any other software installed to monitor the gprs, (nor any running in task manager).
Thx
Click to expand...
Click to collapse
Done a soft reset? if that doesn't work, you might want to try a hard one, unless someone else has an idea.
veyka said:
Done a soft reset? if that doesn't work, you might want to try a hard one, unless someone else has an idea.
Click to expand...
Click to collapse
Will try that right now, in the meantime...
CRCs Device Update (is that available as a CAB file somewhere?)
I'm trying to grab some CRCs RingTones, and other goodies available through Device Update.. but DU is not on my phone ..yet
silicuda said:
Will try that right now, in the meantime...
CRCs Device Update (is that available as a CAB file somewhere?)
I'm trying to grab some CRCs RingTones, and other goodies available through Device Update.. but DU is not on my phone ..yet
Click to expand...
Click to collapse
Try updating to 12.11, its a lot faster than 11.2 for me, and I cant find any bugs myself.
(tisnt out there as a cab, no)
silicuda said:
Will try that right now, in the meantime...
CRCs Device Update (is that available as a CAB file somewhere?)
I'm trying to grab some CRCs RingTones, and other goodies available through Device Update.. but DU is not on my phone ..yet
Click to expand...
Click to collapse
Time to upgrade, 12.11 is as good as stable now I believe he told me, so close not funny. What version of SPB GPRS monitor are you trying to run?
zocster said:
Time to upgrade, 12.11 is as good as stable now I believe he told me, so close not funny. What version of SPB GPRS monitor are you trying to run?
Click to expand...
Click to collapse
Re: Original Topic - Just softrebooted, and it works Thx for that!
Upgrade Sounds tempting! If I upgrade will I lose all my settings? (IE HTC Home?) :S
zocster said:
What version of SPB GPRS monitor are you trying to run?
Click to expand...
Click to collapse
SPB GPRS Monitor 2.4.1
silicuda said:
Re: Original Topic - Just softrebooted, and it works Thx for that!
Upgrade Sounds tempting! If I upgrade will I lose all my settings? (IE HTC Home?) :S
Click to expand...
Click to collapse
It's on DU
silicuda said:
Re: Original Topic - Just softrebooted, and it works Thx for that!
Upgrade Sounds tempting! If I upgrade will I lose all my settings? (IE HTC Home?) :S
Click to expand...
Click to collapse
For HTC home, get HRC home customiser and back up your settings. (see FAQ)
Yes, you will lose everything else though.
WM is like windows, if odd stuff happens, reset it till it behaves. glad it worked :d
veyka said:
For HTC home, get HRC home customiser and back up your settings. (see FAQ)
Yes, you will lose everything else though.
WM is like windows, if odd stuff happens, reset it till it behaves. glad it worked :d
Click to expand...
Click to collapse
OK, will backup the configs. (I already have the customizer.. had to change the clock lol)
Thanks much, this is fun
my friend has a HTC Diamond Touch he is selling it because 'it is too complicated' hahaha
silicuda said:
OK, will backup the configs. (I already have the customizer.. had to change the clock lol)
Thanks much, this is fun
my friend has a HTC Diamond Touch he is selling it because 'it is too complicated' hahaha
Click to expand...
Click to collapse
I couldn't live without my QWERTY
Fidderling with WM is fun, once you get going you dont stop!
veyka said:
I couldn't live without my QWERTY
Fidderling with WM is fun, once you get going you dont stop!
Click to expand...
Click to collapse
..in the process of upgrading to latest CRCs rom...
yes, yes i really like the keyboard... i had a QTEK 8310 WM smartphone prior, it was fun, but this is way better... although i tweaked that one pretty well
silicuda said:
..in the process of upgrading to latest CRCs rom...
yes, yes i really like the keyboard... i had a QTEK 8310 WM smartphone prior, it was fun, but this is way better... although i tweaked that one pretty well
Click to expand...
Click to collapse
I came up from a BlueAngel, The screen, and everything on this phone is bliss compared!
veyka said:
I came up from a BlueAngel, The screen, and everything on this phone is bliss compared!
Click to expand...
Click to collapse
Definately a nice change for you too then
What bluetooth GPS receiver would you recommend? I need GPS as I always get lost in Budapest & Belgrade
silicuda said:
Definately a nice change for you too then
What bluetooth GPS receiver would you recommend? I need GPS as I always get lost in Budapest & Belgrade
Click to expand...
Click to collapse
never used it couldn't afford one I hear the star 3 or something ones are good, just, the more sat's it can lock the better.
When I reboot, it gives me a notice
"Connection Setup"
The operator does not exist in the database, please contact your operator for the connection settings.
Connection setup will redirect you to the connections screen.
--why do i get this error notice, and how do i fix it--
Thanks
silicuda said:
When I reboot, it gives me a notice
"Connection Setup"
The operator does not exist in the database, please contact your operator for the connection settings.
Connection setup will redirect you to the connections screen.
--why do i get this error notice, and how do i fix it--
Thanks
Click to expand...
Click to collapse
start/settings/connections connection wizard, option untick enable auto detect or something, your country must not be on the list? Edit what did you download? what version I thought he used the latest connection setup wizard which should detect vancouver?

GPS/SatNav recommendations -which one?

I got TomTom bundled with the Athena and Cruise, no such luck with the TP2. Any suggestions or recommendations about which package to go for for TP2, bearing in mind the wide screen etc.
All suggestions welcome
i have tried 3 sat navs over the years. obvious one is tomtom, i use copilot 7 and have no probs. i have read and heard great reports of mcguider? might want to check the spelling. very popular is garmin xt but word of warning.... youll have to hot swap your sd card and that is no fun. workarounds available but not worth messing around with it.
i went for copilot live 7 because i found a cheap one on ebay and no need to hot swap. its very clear and works with most devices.
I think that should be a good short list. no doubt others will champion other brands.
I use TomTom, have no problems with it at all, works 100%
Presumably using VGA version rather than QVGA?
jaso2005 said:
Presumably using VGA version rather than QVGA?
Click to expand...
Click to collapse
Yes indeed, but it's the 480 X 800 screen that might present an issue
I use tomtom7, but for some reason on my kaiser and rhodium it runs SO SLOWLY.
I only get about 0.75 frames per second update time, which frankly is terrible compared to the 3-5fps that you would see on a standalone tomtom unit.
dazultra2000 said:
I use tomtom7, but for some reason on my kaiser and rhodium it runs SO SLOWLY.
I only get about 0.75 frames per second update time, which frankly is terrible compared to the 3-5fps that you would see on a standalone tomtom unit.
Click to expand...
Click to collapse
I use 7.915, the latest version which runs flawlessly.
As mentioned ... I have CPL6 and it works fine on the TP2 taking up the whole of the WVGA screen except the initial splash and performs well.
Paul.
igo8 (latest version) works on mine just fine. Same version I was using on the HD
iGo 8
I cant get iGo 8 to work to save my life!, I've installed and re-installed countless times now and Iget the same issue, it installs fine but wont start the application, even to give me the license agreement page.
it just bombs out and it's really cramping my phone at the moment... any ideas?
Turn off A-GPS
terryd1980 said:
I cant get iGo 8 to work to save my life!, I've installed and re-installed countless times now and Iget the same issue, it installs fine but wont start the application, even to give me the license agreement page.
it just bombs out and it's really cramping my phone at the moment... any ideas?
Click to expand...
Click to collapse
Hi
I couldn't get IGo8 to run with A-GPS enabled. It still works fine.
Cheers
andrew-in-woking
A-GPS
Hi there,
I might be really stupid but where in the settings is the option to switch off Assisted GPS?
I'm surprised that it doesnt work with A-GPS as the Kaiser had no issues at all.
Thanks for your help
A-GPS settings
terryd1980 said:
Hi there,
I might be really stupid but where in the settings is the option to switch off Assisted GPS?
I'm surprised that it doesnt work with A-GPS as the Kaiser had no issues at all.
Thanks for your help
Click to expand...
Click to collapse
Start>Settings>System>Location Settings
Cheers
andrew-in-woking
iGO8
Hi all
I have the latest version of iGO8 working perfectly on my TP2.
Cheers
andrew-in-woking

Categories

Resources