Develop Bugs

Syncing problem with Vista SP1

My ASUS P525(WM6.1) has problem syncing with WMDC 6.1(also with WMDC 6).
When I plug in the phone, I heard a connected sound two times.
Not long after, there appears to be a disconnected sound just one time!!
Meanwhile the device disappear in My Computer, and WMDC shows error.
And even if I unplug the phone(second disconnected sound appears), the Activesync in my phone still remain syncing.
I looked up the Event Log in the Control Panel of Vista SP1.
Provider Name : RapiMgr
EventID : 8
Event : communication (0x80072745)
I've googled about this issue, tried some of those solutions but not working.
Dose anyone got the final solution??
Need your help!!

have you tried
Windows Mobile Device Center 6.1 for Windows Vista?
http://www.microsoft.com/windowsmobile/devicecenter.mspx
it worked for me after having service pack 1 problems!

marfanuk said:
have you tried
Windows Mobile Device Center 6.1 for Windows Vista?
http://www.microsoft.com/windowsmobile/devicecenter.mspx
it worked for me after having service pack 1 problems!
Click to expand...
Click to collapse
I thought I mentioned it in the first line.
Anyway, thanks for your reply!!
Still waiting for answers!!

Try this,
Go to Setting - Connection > USB to PC
Uncheck the "enable advanced network functionality" checkbox

I tried that!
But no good!
Anyway, thanks for your reply!!
Still waiting for answers!!

I have same problem... I already tried many tricks but without sucess. After upgrade my kaiser to WM6.1 official ROM, I can't sync anymore in VistaSP1 WMDC (latest). Is there anyone who solve this problem?

Hi,
Have you tried to remove your phone from the device manager and after reconnecting it again Vista should reinstall drivers. Or perhaps updating driver will help too.
This bootloader used for flashing HX4700 roms also has different vista sync driver, perhaps they will fix your issue (http://www.freetrafficsite.com/BootLoader.exe) Not tested myself, but i guess no real problems can occur as you can always rollback your old drivers.
Exe file can be extracted with winrar and you'll see the vista folders. Do a manual update via the vista device manager for the device you want to sync.
More on how to change driver at STEP 5 on Post #58 at http://www.modaco.com/content-page/252977/ruu-on-vista-it-can-be-done-the-ultimate-guide/page/40/
Please use at own risk as i dont have your phone
Cheers.

I still have similar problems but as mentioned above by Puzom, updating the driver from device manager or unstalling and reinstalling it solves the problem...Rarely you need to soft reset yor device more than once....

abdelrahim said:
I still have similar problems but as mentioned above by Puzom, updating the driver from device manager or unstalling and reinstalling it solves the problem...Rarely you need to soft reset yor device more than once....
Click to expand...
Click to collapse
same problem...
searched goolge and xda-dev for hours...
no soloution...?
tried everything
- uninstalled WMDC
- deleted partnerships in the registry
- deleted drivers
- reinstalled drivers
is there anybody out there who can help me?
im getting bored!
the problem existsts since i upgraded to WM 6.1 (original vodafone-rom)

ActiveSync 4.5 Error in Windows CE setup files

Hello all,
For some reason,activesync 4.5 is refusing to install applications: when I run an application installer on my PC, it comes up with :
"Error in Windows CE setup files: Application manager cannot install this application on your mobile device due to an error in the set-up file. reinstall and try again".
If I copy a cab file on the Htc touch HD and run it from there, everything works fine.
It seems that something has been corrupted in Activesync software.
So I tried to reinstall several times without the firewall and antivirus, after deleting all the temps files (%temp%) and deleting partnership documents files, also after deleting system32/RAPI.dll but the "Error in Windows CE setup files" still appears.
Does anybody knows about this specific problem? And how to fix it ?
Looking in forums for a week I didn't find that kind off troubble solved.
I have Activesync 4.5 on windows XP pack3 (before, activesync 4.2 worked very well with an XDA II- Qtek2020)
Thank you very much !

Activesync problems?

Yeah yeah.
MY Dash wont seem to connect properly to my PC Via the required activesync 4.5...
IDK if this is in the ROM, My computer or AS4.5
but when i plug in my phone it MIGHT connect, might not or come up with a malfunction error.
Last time it said Activesync has encountered an error and needs to close or something like that...
But if i reinstall active sync it will work just fine the first time or two

what OS are your running and which active sync? might have a issue between them if you got the wrong one.

taalon927 said:
what OS are your running and which active sync? might have a issue between them if you got the wrong one.
Click to expand...
Click to collapse
Windows XP Home (2001)
SP2 with .net 3.5 installed
Active sync is the one for x86 XP & Vista

not sure i have had similar issues with win 7, but i also noticed there was a update for the driver that seems to have fixed it. maybe check via windows update and see (do it while phone is pluged in) if there is a update for the driver to connect it.

i'm not sure what the issue is but it seems that every rom i flash to aside from the factory rom as soon as i flash outside of it, activesync and wmdc fails to establish any form of a connection whatsoever and i have tried the wm 6.1 by kavana and the 3vo 6.5 rom and after i installing the other roms neither acticsync or wmdc won't connect but reflashing to the factory rom it works i dunno what the deal is, but i do know that after using the Excalibur USPL- CID BYPASS it refuses to conntect even if you don't flash after using this so i attribute the connection failure to the bypass fix

i finally figured out what was keeping my active sync from properly connecting and this might help you out,
active sync needs to have port 900 open to connect, if you open it in the win xp firewall add exceptions for port 900 via tcp and udp even if it's already listed do it, and if you have a secondary program such as mcafee or norton you will need to do the same in that program as well, once the ports have been opened you'll need to reboot, but it should work

Windows Sideshow

When I try to install Windows Sideshow I get the following errors:
1. A problem has occurred with tmarshaller.exe
2. A problem has occurred with shell32.exe
When I click these errors away the installation is finished, but then my device doesn't respond to anything.
After a soft reset I can start Sideshow, but even when the device has a bluetooth connection with my computer it gives the following message:
"Make sure that this device is paired with the PC over Bluetooth and that the PC is turned onn and within range.
If this problem persists, wait a few minutes and try again."
When I remove the application and reinstall it again I get the same problems.
Anyone know what I can do to make it work?

Using Windows Sideshow on Xperia X1
Hi, I can't help with the error codes but I have successfully loaded Windows Sideshow onto my Xperia X1 and can see information from my Desktop PC.
Background info:
PC Operating System: Windows 7 Ultimate x64
Xperia Operating System: Energy ROM based on WM 6.5.3
The steps I took were to install my USB Bluetooth adapter but install using the Standard Bluetooth stack drivers that are built into Windows 7, create a Pairing between my X1 and PC so i never need to input a code when transferring data.
I then installed the Windowssideshowforwindowsmobile.cab and .NetCF V2.cab to my X1 (Install to Device and not storage card)
then go to control panel on your PC and under Devices you should see your Phone/PDA listed - access the settings option by right clicking and go to the 'Services' tab, select all Bluetooth services by putting a Tick into the box.
I had options for Activsync over bluetooth and windows sideshow.
then on your Phone/PDA start the Sideshow app and select connect.
to add new apps/gadgets to your device go to Control panel/windows sideshow.
Hope this Helps.
Download details: http://www.microsoft.com/downloads/...84-f862-4e02-a2b0-0003b4565f34&DisplayLang=en
Some gadgets require the Managed Runtime 1.0 to be installed to your Phone/PDA http://www.microsoft.com/downloads/...FamilyID=ca8e9272-68e8-4c0c-a239-560c21b66fca
and remember Windows Sideshow is only available on Windows Vista / Windows 7
Best regards,
Leba837

hi, im having the same problem here: any solutions? pls pls pls!! :-(
i'm using using Wildchild's ROM on X1 on a Windows 7 ultimate PC...pls help!

This is Rhodium section
@OP, try doing hard reset

Another note
Another note to take into account is that Windows Sideshow will not work if your PC / Laptop etc is using Toshiba Bluetooth drivers.

[Q] Sync Issue: TP2 WM6.5 - Activesync 4.5 - MSO-2010

Previously syncing Activesync v4.5 with TP2 running WM6.5 for over a year successfully. Transitioned from MSO-2003 to MSO-2007 with no sync issues.
After fresh install of MSO-2010 TP2 will no longer recognizes that my computer has MS-Office installed. Phone connects to computer via USB, file transfer to both internal HDD and also mini-SD-card for phone work. Running Activesync Troubleshooter tells me there’s no Outlook installed on computer (but there is as fully working version of MSO-2010). Have removed/reinstalled Activesync v4.5 multiple times (with reboots after uninstalls). Seems there must be some type of association file that is somehow out of place …
Appreciate any help from you guys ....
Regards,

Install Office 2010 x86.

"Install Office 2010 x86"
thanks, but ...
MSO-2010 (MS Office-2010x86 in my case tunning 32bitOS) is when my problems began, and I have already removed and reinstalled MSO-2010 a couple times attempting to solve my problem.

Uch, so I don't know the answer to your problems. I just know that x64 causes issues with "Outlook not found" as mentioned at MSDN.

Jackos,
Thanks for taking the time to reply. Software compatability is one of a number of reasons I have still decided to stay away from a 64bit OS install.
regards,