new ROM problems - HTC Excalibur

I have just installed RUU_Excalibur_WM61_Kavana_Rickys_v24 No Opera. It finished without any problems,but when it restarted the phone it stoped at the windows logo?
Please help URGENT

maksce said:
I have just installed RUU_Excalibur_WM61_Kavana_Rickys_v24 No Opera. It finished without any problems,but when it restarted the phone it stoped at the windows logo?
Please help URGENT
Click to expand...
Click to collapse
try and hard reset

maksce said:
I have just installed RUU_Excalibur_WM61_Kavana_Rickys_v24 No Opera. It finished without any problems,but when it restarted the phone it stoped at the windows logo?
Please help URGENT
Click to expand...
Click to collapse
Give your phone a while to boot up sometimes when I flash ROMS the cold boot config takes up to 10 minutes! Just leave your phone alone for a while and come back to it let it configure it's self. If that fails try entering boot loader by holding the camera button and just pressing(do not hold just press) the power button from there flash a stock ROM and start over.
Hope this helps.

solved
i solved it.i removed the sim card and the problem was gone.

maksce said:
i solved it.i removed the sim card and the problem was gone.
Click to expand...
Click to collapse
A very practical way to solve your problem, It's good to hear that your dash is working.

Related

help ... xda exec won't start after rom flashing

somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Which ROM did u reflashed ?
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!
Have u tried reflashing it again via bootloader mode ?
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!
U shld better get it replaced .
niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.
niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.
still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..
trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....
I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working
This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back

HELP! I think brick my phone!!

Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!
i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?
just Change your ROM..,
hard reset is somthing i dont want to do. Is there any other option?
kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
cool, will try that one. thnx
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.

Touch Pro 2 stuck on HTC screen

Okay, my touch pro 2 is messed up beyond belief. I tried to install a custom rom and I did it all by the instructions. Then it turned off when it was restarting and afterwards once it was restarting it just stayed on the HTC screen. It will not go any further. I have hard reset the thing many times along with trying to reinstall the roms. I honestly hope there is something that I can do... I have also tried doing the SD flash. Either way please comment ASAP.
Bootloader Info
RHOD400 32M SS-BC
SPL-1.00.OliNex
MicroP(LED) 0x0A
MicroP(KEY) 0x04
Turbro HW/Turbo SW
TP MFG DATA
496,521 764,841
763,207 245,198
227,841 Calibrated
This is what is shown in bootloader
the rhod400 is a cdma device, go to the tp2 cdma development and flash a rom from there
this is only for GSM devices
Is that why it would be stuck in the HTC Screen everytime?
pablotheescobar said:
Is that why it would be stuck in the HTC Screen everytime?
Click to expand...
Click to collapse
yeah, you installed a GSM rom, which is not compatible with your device
here is the link to the CDMA forum, good luck
http://forum.xda-developers.com/forumdisplay.php?f=517
Well, the thing is that I have tried to flash ROMS on there before and it still goes to the same screen. I don't know what I need to do because every forum is just saying try flashing it and I already have tried that and it goes to the same screen every time.
pablotheescobar said:
Well, the thing is that I have tried to flash ROMS on there before and it still goes to the same screen. I don't know what I need to do because every forum is just saying try flashing it and I already have tried that and it goes to the same screen every time.
Click to expand...
Click to collapse
did you run the "task 29" tool before flashing?
No, I never did do that... In the tutorial it never had that. I had to unlocked it with the hardSPL and I did that and it just restarted fine and then once I did that I installed the other one and it did the custom Rom and this is the outcome of that...
pablotheescobar said:
No, I never did do that... In the tutorial it never had that. I had to unlocked it with the hardSPL and I did that and it just restarted fine and then once I did that I installed the other one and it did the custom Rom and this is the outcome of that...
Click to expand...
Click to collapse
just do that before every flash and you'll be fine
Yeah, but my phone won't load anymore. It turns on and stays at the white HTC screen.
ok what task 29 does is deleting everything on the internal storage, read the cdma faq, so dont expect it to boot, click the button sequence that gets you in the boot loader, connect to usb, run the update utility, and profit. can't be anymore simple
good luck
NEVERMIND!
I installed the LEAD ROM, and it went through the ROM process and it came to the HTC screen and then it started loading I was so happy! Thanks for your guys help!
pablotheescobar said:
I installed the LEAD ROM, and it went through the ROM process and it came to the HTC screen and then it started loading I was so happy! Thanks for your guys help!
Click to expand...
Click to collapse
ur welcome, don't forget the thx button
pablotheescobar said:
Yeah, but my phone won't load anymore. It turns on and stays at the white HTC screen.
Click to expand...
Click to collapse
have you formatted your micro sd card to fat32?
then flash the rom from the sd card.
bro heres what you gotta do to fix your pfoblem, first format your sd card to fat32 then copy the nbh file onto the card, rename it to RHODIMG insert the sd card then enter the boot loader menu by first taking out the battery, and reinserting it. now with the phone off hold the volume down button while pressing the power button this forces the device into bootloader mode. your screen WILL read RHODIMG os. now press the power button again to install whatever rom you want but I would recommend using a stock rom or one that you know works, ie- from past experience.
trust me bro do this and all will be fine again,
HAPPY FLASHING
oh dont forget to press the soft reset button once the rom installation is done when the screen says installation successful,
once again HAPPY Flashing>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
next thing is to try a different cable.
try this and if it doesnt work pm me and I will walk you through some more complicated steps. I have an epic now so I am not on this page much anymore. but I am very familiar with the rhodium. and like to come by every once in a while to see if anyone needs any help!
sapperpipo said:
have you formatted your micro sd card to fat32?
then flash the rom from the sd card.
bro heres what you gotta do to fix your pfoblem, first format your sd card to fat32 then copy the nbh file onto the card, rename it to RHODIMG insert the sd card then enter the boot loader menu by first taking out the battery, and reinserting it. now with the phone off hold the volume down button while pressing the power button this forces the device into bootloader mode. your screen WILL read RHODIMG os. now press the power button again to install whatever rom you want but I would recommend using a stock rom or one that you know works, ie- from past experience.
trust me bro do this and all will be fine again,
HAPPY FLASHING
oh dont forget to press the soft reset button once the rom installation is done when the screen says installation successful,
once again HAPPY Flashing>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>
next thing is to try a different cable.
try this and if it doesnt work pm me and I will walk you through some more complicated steps. I have an epic now so I am not on this page much anymore. but I am very familiar with the rhodium. and like to come by every once in a while to see if anyone needs any help!
Click to expand...
Click to collapse
look above it says problem solved, and that ungrateful n00b did not even hit the thanks button, don't waste your breath
Yeah your right.
Sent from my SPH-D700 using XDA App
Hey, I am going through the same thing too. I hope that someone can really help. I am a beginner when it comes to this.
pablotheescobar said:
Okay, my touch pro 2 is messed up beyond belief. I tried to install a custom rom and I did it all by the instructions. Then it turned off when it was restarting and afterwards once it was restarting it just stayed on the HTC screen. It will not go any further. I have hard reset the thing many times along with trying to reinstall the roms. I honestly hope there is something that I can do... I have also tried doing the SD flash. Either way please comment ASAP.
Click to expand...
Click to collapse

Stuck in safe mode please help!

Please help my Xperia Play (R800i) is stuck in safe mode! I already did a phone reset as well as a factory reset but still it shows SAFE MODE! PLease help me T___T :crying:
Did some google search, saw someone said that reboot phone and press down vol+ key. Try and see?
Sent from my awesome Xperia Play with DoomKernel
it didn't work...
jeff7424 said:
Did some google search, saw someone said that reboot phone and press down vol+ key. Try and see?
Sent from my awesome Xperia Play with DoomKernel
Click to expand...
Click to collapse
I tried what you said but it didn't work. :crying:
ALSO, the menu button at the front is not working for some reason, but the menu button on the game pad works fine.
mimacheda said:
I tried what you said but it didn't work. :crying:
ALSO, the menu button at the front is not working for some reason, but the menu button on the game pad works fine.
Click to expand...
Click to collapse
Someone faced this also. Can you try this? Turn off phone, unplug battery for 2 minutes, place battery and boot.
Sent from my awesome Xperia Play with DoomKernel
jeff7424 said:
Did some google search, saw someone said that reboot phone and press down vol+ key. Try and see?
Sent from my awesome Xperia Play with DoomKernel
Click to expand...
Click to collapse
jeff7424 said:
Someone faced this also. Can you try this? Turn off phone, unplug battery for 2 minutes, place battery and boot.
Sent from my awesome Xperia Play with DoomKernel
Click to expand...
Click to collapse
Hi! Yup, I tried that one too it still comes up the same.
mimacheda said:
Hi! Yup, I tried that one too it still comes up the same.
Click to expand...
Click to collapse
1st try to remover last apps u installed.. nd reboot phone if not work for u than u need to flash rom with pc
st_383 said:
1st try to remover last apps u installed.. nd reboot phone if not work for u than u need to flash rom with pc
Click to expand...
Click to collapse
I already did a factory reset but it still comes up in safe mode + the menu button at the front is not working. I'm trying the software update(repair) through PC companion now, but it's taking forever to finish.
Its been a couple of hours now and the pc companion phone software update is still not done processing. I don't have anything in my phone how come its taking so long? please help me.
I think I know the reason why
I think I found out what's causing my phone to be stuck in safemode. I did everything even the software update in pc companion but it's still stuck on safemode. I think I know why. my front menu button I think is stuck that's why no matter how much I reboot its still on safe mode because its like I'm still pressing it. does anyone know how to clean the back? Please tell me 'cause I don't know how...
mimacheda said:
I think I found out what's causing my phone to be stuck in safemode. I did everything even the software update in pc companion but it's still stuck on safemode. I think I know why. my front menu button I think is stuck that's why no matter how much I reboot its still on safe mode because its like I'm still pressing it. does anyone know how to clean the back? Please tell me 'cause I don't know how...
Click to expand...
Click to collapse
if u have bootloader unlock than flash with flashtool.. its 100% work..
in my xplay same prob.. wen i flash all ok now
st_383 said:
if u have bootloader unlock than flash with flashtool.. its 100% work..
in my xplay same prob.. wen i flash all ok now
Click to expand...
Click to collapse
no need to unlock bl for flasing via flashtool
Contact Cleaner
I fixed it a few weeks ago, figured all I needed was a contact cleaner, there was dust causing the front menu button to be stuck, that's why the phone thinks I want to go on safe mode because the menu button is being pressed. >_<
I wanted to post this so that if ever this happens to you don't freak out immediately and check if its clean before you restore factory settings or whatever.

HTC 10 Continuous Restart Problem

Hi everybody i bought htc 10 last month but this problem began to last week , the device does not turn continuously restarts.
I tried open to download mode,recovery mode,safe mode but it didnt work. Only open to bootloader menu it worked.
I tried flash ruu but this exe say to no charge this device charged
I tried flash fastboot but my device bootloader is locked
Is there who can help me ?
ulasates said:
Hi everybody i bought htc 10 last month but this problem began to last week , the device does not turn continuously restarts.
I tried open to download mode,recovery mode,safe mode but it didnt work. Only open to bootloader menu it worked.
I tried flash ruu but this exe say to no charge this device charged
I tried flash fastboot but my device bootloader is locked
Is there who can help me ?
Click to expand...
Click to collapse
try removing your external sdcard.
I've read other people experiencing the same issue....and it was a broken external sdcard causing it.
j to the 4n said:
try removing your external sdcard.
I've read other people experiencing the same issue....and it was a broken external sdcard causing it.
Click to expand...
Click to collapse
Thanks but what try? Normal open , Safe mode , Ruu , Fastboot , Download mode , recovery mode ?
Personally I would try a factory reset
Sent from my Nexus 5 using XDA-Developers mobile app
ulasates said:
Hi everybody i bought htc 10 last month but this problem began to last week , the device does not turn continuously restarts.
I tried open to download mode,recovery mode,safe mode but it didnt work. Only open to bootloader menu it worked.
I tried flash ruu but this exe say to no charge this device charged
I tried flash fastboot but my device bootloader is locked
Is there who can help me ?
Click to expand...
Click to collapse
Has your device been rooted?
If i helped you, remember to click the thanks button!
ulasates said:
Thanks but what try? Normal open , Safe mode , Ruu , Fastboot , Download mode , recovery mode ?
Click to expand...
Click to collapse
...as I said, just remove the external sdcard and it should boot fine.
When you scared is damaged, there's no fix, but just to return it
Since 1 hour i have the same issues.
After a restart the phone hangs in a boot loop.
boot up to HTC Logo but then restart immediately.
I can enter the white Bootloader screen, but when i select Download or Recovery Mode, it hangs in the Boot loop again.
SD Card already removed but is not working too.
My phone is unlocked, rootet & s-off
Anyone a solution?
Because i cant enter Download or Recovery it seems there is not way to reset the phone?!
gosha98_ said:
Has your device been rooted?
If i helped you, remember to click the thanks button!
Click to expand...
Click to collapse
My device is s-on , locked, no root
ulasates said:
My device is s-on , locked, no root
Click to expand...
Click to collapse
Did you try a factory reset?
If i helped you, remember to click the thanks button!
j to the 4n said:
...as I said, just remove the external sdcard and it should boot fine.
When you scared is damaged, there's no fix, but just to return it
Click to expand...
Click to collapse
My friend is with me right now. We're just tried normal start up, boot start up and safe mode startup but its still doesn't work. If we enter the boot menu then press the recovery mode device will start continuous reboot. What we're gonna do?
ironhandfahri said:
My friend is with me right now. We're just tried normal start up, boot start up and safe mode startup but its still doesn't work. If we enter the boot menu then press the recovery mode device will start continuous reboot. What we're gonna do?
Click to expand...
Click to collapse
seems we have the same problem and it seems that there i no solution ;-(
Help me
HTC One M9 cihazımdan Tapatalk kullanılarak gönderildi
It happens with my unrooted HTC 10 as well.
When I turn on the phone it would would not go past the htc welcome screen, it would vibrate and restart itself.
Spegeli said:
Since 1 hour i have the same issues.
After a restart the phone hangs in a boot loop.
boot up to HTC Logo but then restart immediately.
I can enter the white Bootloader screen, but when i select Download or Recovery Mode, it hangs in the Boot loop again.
SD Card already removed but is not working too.
My phone is unlocked, rootet & s-off
Anyone a solution?
Because i cant enter Download or Recovery it seems there is not way to reset the phone?!
Click to expand...
Click to collapse
Did you ever get your phone working? I'm having the same exact issue right now and i don't know what to do
Yes my htc 10 is working again.
The Power got empty and After some days i charged it and since then the Phone Boots up normal again
I am experiencing the same problem. The phone has the latest update installed. (not rooted, bootloader locked).
I cannot go to any recovery modes.
Its so disappointing ! I'm in India but I bought this phone from middle-east on December 2016 and I have to sent it back there for warranty claim which will not happen very soon.
Have anyone found a solution for this problem ??
Something happened to my cell phone. I enter the bootloader but nothing works
I got same thing but I can't boot my phone any more, just totally frozen down. Not even I try hard reboot with power/power+volume down/power+volume up/power+volume up and down.
I can't do anything without the info on my phone.
Can someone help with this?
This can't be fixed
liu464765169 said:
I got same thing but I can't boot my phone any more, just totally frozen down. Not even I try hard reboot with power/power+volume down/power+volume up/power+volume up and down.
I can't do anything without the info on my phone.
Can someone help with this?
Click to expand...
Click to collapse
We cant fix this, even I tried to troubleshoolt but no luck. You have to contact HTC service and claim warranty. So you will get a new device. Very shame on HTC 10 design, One of my friends who was in HTC service centre has seen atleast 12 HTC 10 devices sent for bootloop issue.
jeraldsm said:
We cant fix this, even I tried to troubleshoolt but no luck. You have to contact HTC service and claim warranty. So you will get a new device. Very shame on HTC 10 design, One of my friends who was in HTC service centre has seen atleast 12 HTC 10 devices sent for bootloop issue.
Click to expand...
Click to collapse
Then is a huge problem for HTC. If they can't find out a way to fix it, they going to be lose a lot of money.

Categories

Resources