Related
Anyone have a suggestion for what kind of case will give me the rubberized feel that the HTC phones have (their backplates). Or if you can't think of a specific case, what kind of material I should be looking into>
I don't want a gel case I think cause its too rubberish and stick and hard cases are just bad. What's a good mix in-between?
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=729133
Just look down before you start a new thread.
I did read all of that before posting. Unfortunately I am looking for a full-fledged case, not a skin or coat I put on the phone. I want something that will protect the phone from a full drop which is not a gel or hard case.
I have this one, it's a hardcase with rubber coating similar to G1, plus perforated holes for better grip. Best looking case in the market at the moment IMO.
"Mesh" case for i9000
http://forum.xda-developers.com/showthread.php?t=730699
vuvsion I have been following the forum very closely. I know of these cases and was considering getting one for the LONGEST time. They DO look great. But if you drop it, your phone is ****ed. It doesn't cover the edges. I don't really care its backplate (i can replace that easy enough). The sides though, are not replacable.
The mesh case covers the back but not the edges. It's pretty but not drop-proof. Do you know of anything LIKE it that covers more of the phone. Cause that would be perfect.
Perhaps one of the case-mate cases would have that same feeling, but since it's still in design stage, it'll take awhile for them to release anything.
Do you know if Case-Mate is even working on a model for the Vibrant/Galaxy S? I just looked at their site and they have VERY few cases for past Samsung phones.
}{Alienz}{ said:
Do you know if Case-Mate is even working on a model for the Vibrant/Galaxy S? I just looked at their site and they have VERY few cases for past Samsung phones.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=7497121&postcount=23
Yup saw that like 3 minutes after posting. Voted on their case-mate forum too. I just hope it doesn't take a month for them to be out.
The body gloves are quite nice
Sent from my SGH-T959 using XDA App
They offer several different ones, that look decent and aren't too expensive by any means. Just a heads up, for those of you who are looking for a new case. I'm probably going to order the fake leather one and the 'magnet gray' one as well.
www dot pure-gear dot com/shop-by-device/motorola.html
The plum case is slick lookin'...thanks for the link
http://www.pure-gear.com/shop-by-device/motorola.html
Loving the leather. And there cheap too!
Purple Drama Llama said:
http://www.pure-gear.com/shop-by-device/motorola.html
Loving the leather. And there cheap too!
Click to expand...
Click to collapse
I love how you linked the site while OP disguised his link
The leather one look cheap and tacky to me. These cases are nice but they don't seem to cover enough of the phone for me.
They look like the cheap (construction-wise) snap on cases. For $30, just get the Seidio Innocase. It's way better in my opinion.
Seidio Innocase II Surface - Black, Amazon
Black and other colors, Seidio Online
On Amazon I got it a week ago for $20, so maybe check a few times they drop the price every once in a while I think.
i got the same case that incipio made for $10 over at Fry's electronics
bobdurfob said:
They look like the cheap (construction-wise) snap on cases. For $30, just get the Seidio Innocase. It's way better in my opinion.
Seidio Innocase II Surface - Black, Amazon
Black and other colors, Seidio Online
On Amazon I got it a week ago for $20, so maybe check a few times they drop the price every once in a while I think.
Click to expand...
Click to collapse
I didn't want this to be a comparison thread. I simply wanted to point out there are alternative cases out there on the market.
I'm really glad you pointed these out. I used to have a Barely There case on my old iPhone and these look pretty similar to that (I really liked it). I've been waiting for a case like this! Since Case Mate doesn't make any for the Atrix, I might get one of these. The colors aren't great, but I hate cases that snap together...
Thanks OP. Just ordered the magnet grey one. Will update when it arrives.
Dr.Jeckyl said:
Thanks OP. Just ordered the magnet grey one. Will update when it arrives.
Click to expand...
Click to collapse
I'm ordering the grey one as soon as I get paid friday! I want overnight shipping, I don't care if I have to pay another 10 bucks to receive it, lol.
Yea.... they are quite nice looking. Not sure if i really wanna give up my TPU case though....
When either of you get yours.... mind posting some more pics? Would like to see what the inside of the case looks like, too.
elementaldragon said:
Yea.... they are quite nice looking. Not sure if i really wanna give up my TPU case though....
When either of you get yours.... mind posting some more pics? Would like to see what the inside of the case looks like, too.
Click to expand...
Click to collapse
Sure thing. I should have it tomorrow.
Just ordered the grey one, hopefully it arrives on Monday!
So can someone explain what exactly this case feels like? I don't REALLY get what a "rubberized satin finish" means... In the past I've used the case-mate barely there cases, which I like because they're not squishy or really rubbery and such. This pure gear case looks solid, but it says it's rubberized so I dunno.
And while I'm asking, what exactly is a TPU case (like this one: http://www.amazon.com/Amzer-Argyle-High-Gloss-Soft-Gel-Motorola/dp/B004L2L6JM/ref=sr_1_6?ie=UTF8&qid=1304100403&sr=8-6)
Is it similar to the pure gear material?
thebeardedchild said:
So can someone explain what exactly this case feels like? I don't REALLY get what a "rubberized satin finish" means... In the past I've used the case-mate barely there cases, which I like because they're not squishy or really rubbery and such. This pure gear case looks solid, but it says it's rubberized so I dunno.
And while I'm asking, what exactly is a TPU case (like this one: http://www.amazon.com/Amzer-Argyle-High-Gloss-Soft-Gel-Motorola/dp/B004L2L6JM/ref=sr_1_6?ie=UTF8&qid=1304100403&sr=8-6)
Is it similar to the pure gear material?
Click to expand...
Click to collapse
Just got mine. First impression is this thing is nice! One of the thinnest cases/shells I've ever seen. Just went into our QA dept to use a caliper and it only measures .86mm or .034" thick. The texture feels almost exactly like my old G1 did. Doesn't feel like it's going to be a lint magnet either. The grey color is a bit lighter than I was expecting too but not too light. It fits OVER the existing battery cover and fits nice and snug. No give in any direction at all. Overall I like it it so far.
I'll post pictures tonight when I get home.
thebeardedchild said:
So can someone explain what exactly this case feels like? I don't REALLY get what a "rubberized satin finish" means... In the past I've used the case-mate barely there cases, which I like because they're not squishy or really rubbery and such. This pure gear case looks solid, but it says it's rubberized so I dunno.
And while I'm asking, what exactly is a TPU case (like this one: http://www.amazon.com/Amzer-Argyle-High-Gloss-Soft-Gel-Motorola/dp/B004L2L6JM/ref=sr_1_6?ie=UTF8&qid=1304100403&sr=8-6)
Is it similar to the pure gear material?
Click to expand...
Click to collapse
TPU (Thermoplastic Polyurethane) is basically like a mix of a hard shell and a silicon cover. It's quite flexible, although not flimsy like a silicon cover.... and it's durable.... able to withstand quite a bit and still return to it's original shape. Actually recorded a video of me squeezing the crap out of one such TPU case that i got on eBay because of someone in another thread questioning the quality of the eBay cases.
http://www.youtube.com/watch?v=700ZNRtNEOA
As for "rubberized satin".... i believe it's basically a quite smooth yet soft feel.... not like a silicon, but not quite like a hard rubber case either. Hard to explain, really. If i had to guess, i'd say it might be similar to the Barely There case, but i'm not sure as i've never used either.
Here's some glamor shots of mine.
Hmm.... not too shabby looking. I may just order one.
edit: Just ordered the deep plum colored one. Only did ground shipping, as i didn't really feel like paying the same amount for shipping as i did for the case.... so it may be a little while.
Thanks for all the info guys! I always wondered what all these different types of plastic cases are. Thanks for the pics too, they inspire me to order one! Has anyone gotten the blue? How does it look in real life?
Sent from my MB860 using XDA App
Purple Drama Llama said:
http://www.pure-gear.com/shop-by-device/motorola.html
Loving the leather. And there cheap too!
Click to expand...
Click to collapse
Thanks for providing the link.
Just ordered this case today - http://www.seidioonline.com/product-p/csk3mtatr-bl.htm
I will post back when i receive it and mess with it some, and possible post up some pics too. I know some of you have been wondering about these cases for the Atrix, and i've been wanting one anyway. So i just went ahead and ordered it, I'll give a review of it once i receive it for you guys/gals.
Wow that does look nice. Post some picture when you get it. I ordered the Motorola one but if I end up not liking it this may be another option. Its a bit expensive but I may consider it if I do not like the Motorola one.
OP do you have any docks??? Im very curious to see if this case will function in the cardock... looks sweet though. i like it better than just about everything ive seen this far.
beazie0885 said:
OP do you have any docks??? Im very curious to see if this case will function in the cardock... looks sweet though. i like it better than just about everything ive seen this far.
Click to expand...
Click to collapse
No, i dont use any docks - at least not yet... maybe sometime in the future.. Just dont have a need for any at this point.
Wow, I just ordered the very same one yesterday! I had one of these for my Nexus S and I really liked it. It looks and feels really good on the phone and I think it is just as protective as the Otterbox Commuter case.
let me know if the silicone is very floppy i had the otterbox commuter but i hate the lose silicone i like my cases to fit and stay. i loved the switcheasy cases for iphone but the dbags only do apple products. if its not all loose and floppy ill get it otherwise im sticking with the defender
Hey.... product manufacturers tend to go where the money is.... and when everyone and their poodle has an Apple product... you can bet what their focus is going to be. Hell, i'd LOVE to see something like the Apex Armor or Vapor4 bumpers that they have for the iPhone 4 made for the Atrix.... but it won't happen. Same way seeing a battery door replacement to use with a PowerMat probably won't happen, although i'm still kinda hoping.
I got the Surface in Sapphire Blue, and if that's any indication to how good their cases are, the ACTIVE is much better. Although it adds twice the thickness to the phone as the Surface.
http://www.tridentcase.com/product_77_131.html
I know this link is for the internation galaxy s2 but they will have one for our phones within 1 month.
They look bad ass!!!
Can't wait.
I even posted a comment on otterbox showing them the link to this site... HA
About time, Trident makes much better cases than Otterbox.
makes phone look like a brick.
I cant wait to see the case for this phone to come out. By the way anyone have a forum or site to find updates on when the release may come out?? i really dont wanna spend $30 on a case-mate tough and then a week later have that come out.
kyhassen said:
I cant wait to see the case for this phone to come out. By the way anyone have a forum or site to find updates on when the release may come out?? i really dont wanna spend $30 on a case-mate tough and then a week later have that come out.
Click to expand...
Click to collapse
you can check their facebook page, but so far all they keep saying is next month when people ask about it.
---------- Post added at 10:45 PM ---------- Previous post was at 10:40 PM ----------
Heelfan71 said:
makes phone look like a brick.
Click to expand...
Click to collapse
there is a chance it may not be that thick. the phone it self is very thin. from what i hear, it is supposed to be an aegis case and could easily be more of a slim/form factor design like this one
SpaceMonky said:
there is a chance it may not be that thick. the phone it self is very thin. from what i hear, it is supposed to be an aegis case and could easily be more of a slim/form factor design like this one
Click to expand...
Click to collapse
A slim one like this for the e4gt would be sick!
still waiting for Ballistic to release an HC case for this phone..
lots of people really want a large, protective case for this thing, and there is nothing out there yet..Case mate tough case is nothing compared to a Ballistic, when it comes to total protection...
What...do you think you own an Iphone4? A guy at work as an Iphone4 in some god awful case that makes it look like an 80's cell phone. I guess at the gym he can skip the bicep and tricep work out, his phone and case will take care of that.
I'm happy with a TPU case and screen protector. That has worked well for my Incredible and EVO. But hey. if you are out in the field and climbing on and in equipment, I can see that a tough case would be nice.
Well, I get the dropsies now and then, plus, the phone will fall out of my sweat pants/short pocket on occasion, so I like to get the ballistic case, and use it without the rubber outside protection; sort of like a slimmed down Otterbox when you use it that way..
if I am going traveling, or out for long periods of time, then I will use the rubber outer layer...
looks tight!!
i will get the red one ASAP when it comes out
I like to switch up my cases depending on the occasion. I'll usually rock a tpu but if I'm working in the field or out at the bar I'd rather switch over to something a bit beefier
Sent from my SPH-D710 using Tapatalk
I generally like to have multiple cases for my phones. I have bought a couple of cases already without having the phone and would like to know which one you guys think is the best. These are the cases I have bought:
http://www.ebay.com/itm/37056726677...X:IT&_trksid=p3984.m1497.l2649#ht_4251wt_1219
http://www.ebay.com/itm/15071254990...NX:IT&_trksid=p3984.m1497.l2649#ht_3081wt_986
http://www.amazon.com/gp/product/B0067I0A04/ref=oh_o00_s00_i00_details
I havent heard many good things about the popcase that it may not provide enough protection. It looks cool though. I have the toughcase but its a dust magnet for starters and the silicone also gets in the way of my screen protector (zagg) at the corners. I have a diztronic tpu case and i like the fit of it better and its thin enough to not be too noticeable. So far i like it best but im still waiting for something better....like otterbox?
Yes, I can not wait for the otterbox. I also found a case for other phones called Sillicrylic (I think thats how you spell it) and that looks like an awesome case!
i think nude is better!
Hi, before I get my SGN i had a Desire HD with PoP case !
And I was very satisfied with it
Thank you, I just noticed that one of the ebay links is actually 7 cases, which is awesome so I can switch it out. I will let you guys know which one is best when I get them.
GalaxynexusVZW said:
http://www.ebay.com/itm/37056726677...X:IT&_trksid=p3984.m1497.l2649#ht_4251wt_1219
Click to expand...
Click to collapse
I have this one, and for £1.89 I think it is pretty fantastic. Looks and feels great!
Nay to all of the above
Why hide the Google design. If you look at the use of the phone, the corners are the most hit, so a bumper design is the best. the cases in this post like others I've found are thick and bulky for no real benefit.
iPhone is the best example of what we need.
"Can't paste the link as I'm too new but refer to Ebay "iPhone 4S bumper"
We need to push this design before making out pockets bulk up...
GNex Bumper case DIY
I made a simple DIY mod to turn a cheap case into a Bumper case.
Search instructibles.com for 'DIY Bumper Case for Galaxy Nexus' and it will come up.
I would like to keep my phone without a case but the fear of dropping or body wear would get under my skin.
I have a diztronic currently and I'm also ordering some cruzerlite cases.
Sent from my Galaxy Nexus using XDA Premium App
I have a case obsession as well and have many for the Gnex. My latest is the otterbox commuter, which I really love - though its noteworthy that many people do not like this case. A good one as well is the Trident Agesis - I am waiting for this one to be release at the end of Feb.
ironerd said:
I made a simple DIY mod to turn a cheap case into a Bumper case.
Search instructibles.com for 'DIY Bumper Case for Galaxy Nexus' and it will come up.
Click to expand...
Click to collapse
Search isn't coming up. Repost please
dothedyu said:
Search isn't coming up. Repost please
Click to expand...
Click to collapse
http://www.instructables.com/id/DIY-Bumper-Case-for-Galaxy-Nexus/?ALLSTEPS
http://www.amazon.com/gp/browse.html?ie=UTF8&marketplaceID=ATVPDKIKX0DER&me=A1OK9R8S7S5URY