We just got my husband a droid 2 global (same size as droid 2) and we're trying to find a case that will fit the car dock with the extended battery. I have a Droid X with the extended battery, and I was unable to find a case to fit it with the car dock (I ended up getting a Zagg skin). I expect that we'll have to same issue with his phone. The D2 extended battery doesn't add too much thickness, but enough to make a difference with cases. We haven't gotten the car dock yet since I want to get it for him for xmas, so I want to make sure that the case he gets will fit it. Has anyone had any luck with a case for the D2/D2G with the extended battery and car dock?
compchick813 said:
We just got my husband a droid 2 global (same size as droid 2) and we're trying to find a case that will fit the car dock with the extended battery. I have a Droid X with the extended battery, and I was unable to find a case to fit it with the car dock (I ended up getting a Zagg skin). I expect that we'll have to same issue with his phone. The D2 extended battery doesn't add too much thickness, but enough to make a difference with cases. We haven't gotten the car dock yet since I want to get it for him for xmas, so I want to make sure that the case he gets will fit it. Has anyone had any luck with a case for the D2/D2G with the extended battery and car dock?
Click to expand...
Click to collapse
Might not be exactly what you are looking for, but have you seen the "Clingo" products from Allsop? They have a special sticky pad that any phone will stick to, and then you just peel he phone off - I got one in anticipation of me having a Milestone 2, and my wife having an iPhone 4. Obviously, without it being a true docking solution, you'd have to have a separate cable for charging purposes, but I'm tackling that with a USB cable terminating with a socket at the holder, and a two short cables (one for iPhone, and a micro USB for the Milestone).
Hope this helps.
Cheers,
Steve.
Interesting, thanks for the idea!
I believe the standard VZ cases might fit the bill. The wife got a blue hardshell and it's slightly larger around the battery area and looks like its made to accept a larger battery and it fits nicely in the VZ car dock.
How do you feel about your X? I am debating dumping the D2 for the X. I have another week to decide.
Sent from my DROID2 using Tapatalk
We ended up going with a Zagg skin. Some people have had issues (as with any phone), but I haven't had any - I love my X!
edthesped said:
I believe the standard VZ cases might fit the bill.
Click to expand...
Click to collapse
Yes, it works quite nicely, fits the extended battery bump, and a removable plastic backing comes off of the car dock to allow room for the case. I love it!
Sent from my DROID2 using Tapatalk
StevePritchard said:
Might not be exactly what you are looking for, but have you seen the "Clingo" products from Allsop? They have a special sticky pad that any phone will stick to, and then you just peel he phone off - I got one in anticipation of me having a Milestone 2, and my wife having an iPhone 4. Obviously, without it being a true docking solution, you'd have to have a separate cable for charging purposes, but I'm tackling that with a USB cable terminating with a socket at the holder, and a two short cables (one for iPhone, and a micro USB for the Milestone).
Hope this helps.
Cheers,
Steve.
Click to expand...
Click to collapse
As an addendum to this - I've found that if I attach a small magnet to the back of the Clingo (in the right place), this even engages the "Car Dock" user interface of the Milestone when I stick it to the holder.
Here is what I just found out.
I just took a Droid Car Dock from Verizon right out of the box. It was brand new. I removed the Droid2 insert and then tried to place my Droid2 Global with a VZW Case into the dock. It would not fit. The reason the insert comes out is so the dock can support the original droid with the included adapter. From my un-scientific test I just did, the VZW Car dock will not work with a case on it.
ZeroOveride said:
Here is what I just found out.
I just took a Droid Car Dock from Verizon right out of the box. It was brand new. I removed the Droid2 insert and then tried to place my Droid2 Global with a VZW Case into the dock. It would not fit. The reason the insert comes out is so the dock can support the original droid with the included adapter. From my un-scientific test I just did, the VZW Car dock will not work with a case on it.
Click to expand...
Click to collapse
It depends on the case my rubbery Droid 2 case will only fit if I squeeze it in (because the rubber grips the plastic). But hard cases that aren't too big should fit (but not with the extending battery unless there is a specific case for the dock.)
newk8600 said:
It depends on the case my rubbery Droid 2 case will only fit if I squeeze it in (because the rubber grips the plastic). But hard cases that aren't too big should fit (but not with the extending battery unless there is a specific case for the dock.)
Click to expand...
Click to collapse
I used one of the standard hard cases that VZW sells
I have a car dock and the droid 2 shell/holster combo and it works. Slides right in. There is two adapters included make sure two are removed.
Sent from my DROID2 using XDA App
edthesped said:
I believe the standard VZ cases might fit the bill. The wife got a blue hardshell and it's slightly larger around the battery area and looks like its made to accept a larger battery and it fits nicely in the VZ car dock.
How do you feel about your X? I am debating dumping the D2 for the X. I have another week to decide.
Sent from my DROID2 using Tapatalk
Click to expand...
Click to collapse
Can you let me know the model number or the exact name of the standard VZ case?
TripleMPower said:
Can you let me know the model number or the exact name of the standard VZ case?
Click to expand...
Click to collapse
me too! i think i know which one you're referring to, but it's hard to tell. if you don't know the model can you put up a picture?
Related
I got the Otterbox for my Xoom when it first arrived, having 2 kids and chucking it in and out of the car I was wanting something hardy to protect the device.
However after a few months now its a bit too bulky for what I want.
Does anyone here have a decent folio job they can recommend thats protective enough without the bulk?
Preferably in the UK, I like the look of the Zoogue one with its handstrap come headrest strap but to get one and get it shipped over here is going to cost £50..
Trig0r said:
I got the Otterbox for my Xoom when it first arrived, having 2 kids and chucking it in and out of the car I was wanting something hardy to protect the device.
However after a few months now its a bit too bulky for what I want.
Does anyone here have a decent folio job they can recommend thats protective enough without the bulk?
Preferably in the UK, I like the look of the Zoogue one with its handstrap come headrest strap but to get one and get it shipped over here is going to cost £50..
Click to expand...
Click to collapse
I recommend Zoogue, it is on the more expensive side, but the design is very solid.
tragicremedy said:
I recommend Zoogue, it is on the more expensive side, but the design is very solid.
Click to expand...
Click to collapse
I agree. I have one and love it. I currently have the black one and am thinking about getting the pink one as well.
Ended up ordering the Motorola one from Amazon, will keep an eye out for someone in the UK that does the Zoogue ones..
Does the folio case have a charging connection? so i can plug it in whilst 'on the case'
Let you know in a few days when it turns up...
Sent from my MZ601 using XDA App
hotdiamonds said:
Does the folio case have a charging connection? so i can plug it in whilst 'on the case'
Click to expand...
Click to collapse
No, you would have to modify it with a dremel.
hotdiamonds said:
Does the folio case have a charging connection? so i can plug it in whilst 'on the case'
Click to expand...
Click to collapse
Mines just turned up, you can have the device in the case but as the ports are covered you have to have the case open to plug the charger in, and because the charger is at the bottom you cant really have the Xoom on charge and use it at the same time, unless you have it in your hands, on that point the Otterbox wins as you can put it in its stand thing unside down and have the power cable in what is then the top, folio cases dont let you do that :/
Here's hoping the Xoom2 has its power in the side because with this folio you can access the power, camera, speakers, sim/sd slot, the only slots you cant access while its shut are the bottom ones, might not be an issue for the majority of users but tbh you would of thought that someone in Motorola's "asthetics" department would of tested it with at least there own accessory line....
I ended up getting this for my wife's Xoom and it works well while being much thinner than it looks in the pictures. Here is a link if you need:
http://www.amazon.com/Quality-Leath...1?s=electronics&ie=UTF8&qid=1321142040&sr=1-1
I bought the AYL case off Amazon. The current version has the bottom ports exposed.
I originally had the moto folio case, but I definitely prefer the AYL one, not just because the ports are exposed, but because it seems to be decent leather.
Sent from my Nexus One using Tapatalk
I got 2 of these off eBay: http://www.ebay.com/itm/NEW-SAMSUNG...159056?pt=PDA_Accessories&hash=item3f0f089010
They are meant for the "standard" (AT&T or International) GS2's but it fits my new T-989 perfectly even with the DIZTRONIC TPU case on it. It probably fits most any device with a bottom micro-usb port on it. It comes with a removable rubber adapter for smaller devices. Not bad for $11 from China. Got it in about 10 days. It's a knockoff of the iPhone Universal base. No audio out ports. Just sync/charge.
i purchased the Original from Samsung only $40, and it comes with extra 1850 mAh original battery with NFC
AllGamer said:
i purchased the Original from Samsung only $40, and it comes with extra 1850 mAh original battery with NFC
Click to expand...
Click to collapse
Any pictures? How long did it take for you to receive it?
Sent from my SGH-T989 using xda premium
Ok, but that is $29 more than $11 and most people don't need a $29 battery and NFC is useless for the most part. Plus it doesn't work with a case. Other than that, GOOD DEAL!!
Sent from my SGH-T989 using xda premium
OuncE718 said:
Any pictures? How long did it take for you to receive it?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Picture is in the OP as was the approx delivery time.
Sent from my SGH-T989 using xda premium
MisterEdF said:
I got 2 of these off eBay: http://www.ebay.com/itm/NEW-SAMSUNG...159056?pt=PDA_Accessories&hash=item3f0f089010
They are meant for the "standard" (AT&T or International) GS2's but it fits my new T-989 perfectly even with the DIZTRONIC TPU case on it. It probably fits most any device with a bottom micro-usb port on it. It comes with a removable rubber adapter for smaller devices. Not bad for $11 from China. Got it in about 10 days. It's a knockoff of the iPhone Universal base. No audio out ports. Just sync/charge.
Click to expand...
Click to collapse
Nice going order me a couple of them. Thanks
Does anyone know if this cradle or any other one will work with the D3O Flex Case?
x6369x said:
Does anyone know if this cradle or any other one will work with the D3O Flex Case?
Click to expand...
Click to collapse
from the pictures it seems way too tight to fit in with a case
however the original one from Samsung will work just fine with cases, pictures here
http://forum.xda-developers.com/showthread.php?t=1349656
Thanks. Looks good.
MisterEdF said:
I got 2 of these off eBay: http://www.ebay.com/itm/NEW-SAMSUNG...159056?pt=PDA_Accessories&hash=item3f0f089010
They are meant for the "standard" (AT&T or International) GS2's but it fits my new T-989 perfectly even with the DIZTRONIC TPU case on it. It probably fits most any device with a bottom micro-usb port on it. It comes with a removable rubber adapter for smaller devices. Not bad for $11 from China. Got it in about 10 days. It's a knockoff of the iPhone Universal base. No audio out ports. Just sync/charge.
Click to expand...
Click to collapse
Can you post pics of your T-989 w/ TPU case in the dock?
Do you know if the USB transmits audio and if it has a back 3.55mm jack?
I ordered two of the Sinjimoru Sync stands. They're cool looking and lightweight. I removed the two lock tabs on the cable that make the cable stick in tighter. I'm planning on mounting them to something that won't lift up easily when I try to remove the phone. Overall, worth the $22.
Sinjimoru Sync & Charge Dock
Looks awesome but does it tip over easily? looks unstable
AllGamer said:
from the pictures it seems way too tight to fit in with a case
however the original one from Samsung will work just fine with cases, pictures here
http://forum.xda-developers.com/showthread.php?t=1349656
Click to expand...
Click to collapse
The stand you are linking to doesn't charge or sync. That stand is just a holder with no connection directly to the phone. 2 totally different things with totally different purposes.
x6369x said:
Does anyone know if this cradle or any other one will work with the D3O Flex Case?
Click to expand...
Click to collapse
It fits my T989 with the Diztronics case no problem and will fit any similar "thinness" case. Snug, but no problem. I looked at the D30 case the other day and put them up against each other and while the left to right size are identical the front to back on the D30 is a bit more and my guess is it wouldn't fit. I was surprised when my Diztronic case fit but it did NOT need to be forced, just a slight push. For $11 you really can't go too wrong.
talltexan said:
Do you know if the USB transmits audio and if it has a back 3.55mm jack?
Click to expand...
Click to collapse
No audio capability, just charge and sync.
thanks I ordered one
They are still tight on the base, and would tip over if you pushed them. They're fairly stable, but it is kind of a pain to use one hand to hold the base grab the phone.
I did fix that today. I went out into the alley behind the loft and grabbed a brick. A few minutes after meeting the dremel and a little bit of epoxy, they're stable.
http://farm7.staticflickr.com/6233/6366960059_565143ef63_b.jpg
That's what the stands look like mounted to the brick, and in the Body Glove Diamond cases. I did play a little with some LEDs and lighting the bases up, since they're clear/black acrylic and the light travels through them. I'm going to hold off on that for now, but maybe soon.
to choking am a bit confuse on ur pic is that just a stand whit out the option of charging or a stand whit charger?
There is a cable that comes up behind the stand, and snaps into the stand. It charges, and I bet you could use the stand for other phones, but I can't guarantee that. I know it works fine with the T989.
Well thx for ur response ill see if i get my hands on one this on up coming week
Sent from my SGH-T989 using xda premium
Just bought my G-Nex and I'm looking for a case that will work with the extended battery and will either be very easy to take off or can fit in a desk dock and a car dock.
Any suggestions?
Thanks.
I'm leaning toward the ghost armors. I just want the corners protected from drops really. Not sure how well ghost armors work when dropped on concrete from 3-4ft (like it fell out of your hand).
http://forum.xda-developers.com/showthread.php?t=1406602&highlight=ghost+armor
Erukian said:
I'm leaning toward the ghost armors. I just want the corners protected from drops really. Not sure how well ghost armors work when dropped on concrete from 3-4ft (like it fell out of your hand).
http://forum.xda-developers.com/showthread.php?t=1406602&highlight=ghost+armor
Click to expand...
Click to collapse
Thanks for the info. I'm not a fan of screen protectors for hardened glass, but I could use the other parts and skip the screen protector. I agree about the dropping it from 3-4 ft onto concrete. I don't know if you've noticed, but the G-Nex reallly is slippery, which is why I want a case. The darn thing just slips out of my huge hands all the time. Frankly I wish it was a little thicker. This always thinner nonsense drive me crazy. I'm having trouble holding on to mine it is so thin!
Thanks again for the ideas.
First find a dock and car dock that can be purchased...
nomisunrider said:
First find a dock and car dock that can be purchased...
Click to expand...
Click to collapse
LOL... Yeah I know...
whoster69 said:
Just bought my G-Nex and I'm looking for a case that will work with the extended battery and will either be very easy to take off or can fit in a desk dock and a car dock.
Any suggestions?
Thanks.
Click to expand...
Click to collapse
dont have this, but i'd assume the case mate tough case would since it has cutouts for the dock connector(the gold . . . ) on the side
i believe they have pulled it till January though as they have to fix the size of the usb hole(like with the pop case)
i seriously doubt that ANY case will work with the docks.
the docks are normally molded to fit the phone perfectly in the same that it is, adding even 1mm around the phone can make it not fit.
the case i bought has the holes, but honestly i don't think theres a chance in hell of it fitting in the car dock in the case.
the Nexus One had these custom docks, and it was the same thing, you couldn't have any case on the phone for it to fit in any of the docks.
now, things like the invisible shield work just fine (usually) because they don't add any significant bulk to the device.
neok44 said:
i seriously doubt that ANY case will work with the docks.
the docks are normally molded to fit the phone perfectly in the same that it is, adding even 1mm around the phone can make it not fit.
the case i bought has the holes, but honestly i don't think theres a chance in hell of it fitting in the car dock in the case.
the Nexus One had these custom docks, and it was the same thing, you couldn't have any case on the phone for it to fit in any of the docks.
now, things like the invisible shield work just fine (usually) because they don't add any significant bulk to the device.
Click to expand...
Click to collapse
I know Seido used to make some, but I wasn't satisfied with the support I got from them, so I won't be doing business with them again. I kind of figured that might be the case (no pun intended) but hoped someone else might make one.
Thanks.
Hi,
I was looking to pick up a desktop dock. I am using a Seido charger from my Treo pro days. It seems to charge very very slowly (it is plugged in via usb). I was looking for a nicer cradle/dock that would fit my E4GT with a TPU case.
Is there anything out there?
Thanks,
Rich
Here is the Samsung stand/spare battery charger. It doesn't charge the phone but comes with a spare battery and cable to plug in/charge. I have a generic TPU/Hybrid case from eBay and it fits the standard in both portrait and landscape trouble free. Quite like it.
KCs2k said:
Here is the Samsung stand/spare battery charger. It doesn't charge the phone but comes with a spare battery and cable to plug in/charge. I have a generic TPU/Hybrid case from eBay and it fits the standard in both portrait and landscape trouble free. Quite like it.
Click to expand...
Click to collapse
whats the cheapest place to get one of these?
Check Amazon. Picked mine up for just a little over $30 shipped if I recall right. I really like it.
Sent from my SPH-D710 using Tapatalk
I was just snooping around for a cradle/dock that would work with a case. The one I found seems to fit the bill. Search for eBay item 220936397990. Anyone have any hands-on with this cradle?
Might check the fine print on that ebay cradle. It clearly states that cases must be removed from most US models of the GSII in order to work.
Not to say it won't...
EDIT: Nevermind, I don't read to well. You have to remove the cushion from the cradle.
Well I just purchased two. If you want to hold off, I'll let you know how it turns out with a TPU case and a Body Glove case
Please let us know how it works with your case.
How did that go for you? Did you get it yet?
I guess we will never know...
Search my posts, I posted the exact dock I got, that works with my TPU case and posted pictures with links to the products I used. I did have to take a bit of the sides with a dremel tool, but I got 3 docks and did all 3 in about 15 min and they all work perfectly.
Hey, I just wanted to say thanks - I ordered the dock, did the mod with the dremel & it works great!
if you want a car mount (suction cup) get the nuvi 200 mount on ebay (around $4)
WITH tpu case fits perfect snug enough to hold but not damage. Very nice.
won't work without TPU case (too loose a fit)
Ebay - 220983308911
$4.15 Shipped
i am using a hyperion extended battery, i can't seem to find a car mount that supports the extra size, anyone?
http://www.rammount.com/CatalogResults/PartDetails/tabid/63/partid/082065080045066045049054054045050045085078055085/Default.aspx
that looks weird man,
marckrause999 said:
that looks weird man,
Click to expand...
Click to collapse
why don't you try to thank the guy instead....
http://www.ebay.ca/itm/Exogear-Exom...ccessories&hash=item2575df957a#ht_6281wt_1106
vw671 said:
http://www.rammount.com/CatalogResults/PartDetails/tabid/63/partid/082065080045066045049054054045050045085078055085/Default.aspx
Click to expand...
Click to collapse
I have this in my tow truck and it works great. The only problem is you need 2 hands to insert or remove the phone. It holds the phone very tight.
I bought the imagnet car mount
The RAM has been the standard for motorcycle mounts for eyars. They are without a doubt the toughest mounts and must stable and sturdy. The X grip BARELY fits an SGS3 with extended battery
Gotta agree with the imagnet mount. I could never use a regular clamp style mount again!!!
http://www.amazon.com/gp/aw/d/B008IOQ3K6
I'm in the same sitaution
ghostriderz85 said:
i am using a hyperion extended battery, i can't seem to find a car mount that supports the extra size, anyone?
Click to expand...
Click to collapse
What mount did you end up with? I saw suggestion of the same magnetic mount I've been considering but was curious if the magnet would still hold up considering the weight and overall bulk the hperion extended battery adds to the phone?
Cheers
barkus said:
What mount did you end up with? I saw suggestion of the same magnetic mount I've been considering but was curious if the magnet would still hold up considering the weight and overall bulk the hperion extended battery adds to the phone?
Cheers
Click to expand...
Click to collapse
I don't know if anyone got back to you, but I just purchased the iMagnet mount to test with the ZeroLemon 7000 mah battery, and it still works well! I have the rectangle metal plate inside the back between the battery and the TPU case, and it still sticks pretty solidly! It comes with two plates with adhesive, and one round plate without adhesive.
I also tested the hold strength with both a headphone cable and a charging cable attached, and the weight didn't affect performance. Both cables hung slack, so if you have to stretch your cable to the mount, YMMV.
Just posted this in another thread....
The nice thing about the CraigsDocks dock is that it's customizable. If you get the Galaxy S4, it will still fit. Heck, it even fits the NOTE II and smaller phones.
So you buy one dock for the next several years & phones.
I have one in my car and it's far & away the best dock I've ever used. You just have to make sure you tighten down the adjustments real good so it doesn't loosen up.
This will work with many extended batteries.
http://www.craigsdocks.com/samsung-galaxy-s3-car-dock/
CZ Eddie said:
Just posted this in another thread....
The nice thing about the CraigsDocks dock is that it's customizable. If you get the Galaxy S4, it will still fit. Heck, it even fits the NOTE II and smaller phones.
So you buy one dock for the next several years & phones.
I have one in my car and it's far & away the best dock I've ever used. You just have to make sure you tighten down the adjustments real good so it doesn't loosen up.
This will work with many extended batteries.
http://www.craigsdocks.com/samsung-galaxy-s3-car-dock/
Click to expand...
Click to collapse
It is a good option but the price is too high as compared to other mounts that have a very high ratings
Sent from my SGH-T999 using Tapatalk 2
vikramdhani said:
It is a good option but the price is too high as compared to other mounts that have a very high ratings
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
It's not cheap your right...but...
- it's indestructible
- will carry you through with all future devices
- hand made precision machined aluminum
- not only adjustable, but is low profile (as apposed to bulky)
- extremely reliable docking + power (audio too if you run an OTG cable)
- lastly, the craftsman is getting under paid for the effort and materials
(he deserves more really)
reply
yes for this you have to used the mobile power bank
I have a Laza Zip Grip from Amazon ~$10 and holds my Zerolemon 7000mAh
Excellent customer service too. I had an issue with the suction cup almost a year ago, they sent me a new one with their current suction cup design and haven't had any issues since.
Edit: http://www.amazon.com/gp/product/B0085DZ5F4?ie=UTF8&force-full-site=1&ref_=aw_bottom_links
Sent from my SCH-I535 using xda app-developers app
Thanks
You guys rock, the two recommendations are excellent and I haven't been able to find a solution with an extended battery except on this forum.