Considering the Incredible's Car Mount wasn't great... any ideas on good car mounts for the Thunderbolt? I figure there should be plenty of options out there because it has the same form factor/size as the Desire HD and Evo.
I'm looking for something easy... maybe two magnets, attach one to the back piece of a two-piece case and use it to attach it to a magnet stuck onto your car's dashboard? Anyone have a setup like this currently?
Sent from my DROIDX using Tapatalk
I'd love for some kind of car mount that would allow shooting of video while driving. either a suction cup to the windshield with a hole (or self dremel job hole like people did for the D1) or something that can attach to the rear view mirror.
rotorocker said:
I'd love for some kind of car mount that would allow shooting of video while driving. either a suction cup to the windshield with a hole (or self dremel job hole like people did for the D1) or something that can attach to the rear view mirror.
Click to expand...
Click to collapse
I loved my OG Droid car mount, which broke recently. I used a Dremel tool to cut a hole for the camera and it worked great. I hope the car mount can move as freely as the Droid mount did. Really hoping for a desktop dock, too.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks like there Will be some type of mount according to the screenshot seen about the incredible HD in Verizons system. There is a part number for the tbolt that ends in mount....
Sent from my ADR6300 using XDA App
TheZuneLune said:
I loved my OG Droid car mount, which broke recently. I used a Dremel tool to cut a hole for the camera and it worked great. I hope the car mount can move as freely as the Droid mount did. Really hoping for a desktop dock, too.
Click to expand...
Click to collapse
That is what I will do if nothing else materializes. I just hope it doesn't stutter with bumps from my wrx
Purchased car mount
I picked up my Thunderbolt as well as a car mount today I was pleasantly surprised that the car mount does not cover the camera and that it has a place to plug in your car charger. It seems well constructed.
TheZuneLune said:
I picked up my Thunderbolt as well as a car mount today I was pleasantly surprised that the car mount does not cover the camera and that it has a place to plug in your car charger. It seems well constructed.
Click to expand...
Click to collapse
does your phone sit in the dock properly? the micro-usb end of mine seems "higher" than the other end. kind of weird
Mine sits a little high on the USB end..... I really wish there was a way to get back into the car home mode though after you exit it..... right now I've been having to undock and re-dock to re-launch car home.... really anoying.
TheZuneLune said:
I picked up my Thunderbolt as well as a car mount today I was pleasantly surprised that the car mount does not cover the camera and that it has a place to plug in your car charger. It seems well constructed.
Click to expand...
Click to collapse
Was the car mount an HTC product or a generic one that would work? Can you tell me the cost? I just picked up the TBolt but my store didn't have anything so just wondering what my options are.
Car mount is made by HTC and is $29.99 retail at any Verizon store or online at vzw.com
Sent from my Xoom using Tapatalk
Any idea how it knows its in the dock?
craigsdocks said:
Any idea how it knows its in the dock?
Click to expand...
Click to collapse
If motorola didn't happen to patent their magnet method that they used on their droid models, I would assume it would be a similar, if not the same method...
I think the magnet is standard, my htc eris, and fascinate worked by magnents
A general observation, here - if you want a bodaciously well built mount, look at Ram-mount . I have one in my Civic with two heads I can swap - 1 for iPad, one universal cell/pda.
Not cheap, in construction OR price...
Proclipusa.com...
I like and will keep the HTC Car dock. It suits my needs and is car to car transferrable.
Zerotwistknife7 said:
If motorola didn't happen to patent their magnet method that they used on their droid models, I would assume it would be a similar, if not the same method...
Click to expand...
Click to collapse
Yeah I thought the Motorola's were the only ones that used this or had anyway of knowing they was docked.
destroyerbmx said:
I think the magnet is standard, my htc eris, and fascinate worked by magnents
Click to expand...
Click to collapse
I had no idea the Eris or Fascinate had magnetic switches or any way of knowing they were docked automatically.
I know the HTC Incredible has no magnetic switching or anyway of knowing its docked, basically there isn't an automatic dock mode on the Incredible at all.
macewank said:
does your phone sit in the dock properly? the micro-usb end of mine seems "higher" than the other end. kind of weird
Click to expand...
Click to collapse
No,, it seemed to dock fine. Make sure you snap it behind the top overlap piece. I was very pleased that it did not cover the camera and the it has the usb mount. Charging the OG Droid while in the dock was a real pain. I shot some video with it docked this AM and it performed fine. The road was not real smooth so it picked up the bumps, but it beats me trying to hold it.
I can second and third the HTC dock is awesome. I'm coming from an original, then v2 droid dock.
There are a couple of things though.
1. You really have to jam the phone on the right side(by the usb) in the dock to get car dock to come up. Its super tight. You'll actually hear a click once you get it in far enough.
2. You can't get back into car mode if you exit out without redocking.
3. You can't dock the phone if you have any cases and such.
4. I can't seem to change any of the icon choices they give you. I'd much prefer a more "stock" car/home experience. There are a couple other minor annoyances I have with the "dock" program they use in general but it does work well.
Verizon has a car mount just like the OG Droid, it automatically turns the phone into a navigation, it only cost 30, I saw it yesterday, it has the magnets.
I might like a car dock if it fit my phone with the innocase on it.
Related
New docks are showing up on eBay now, including home docks similar to the Seido Jr. but actually made for the Evo, and a car mount made for the Evo,
Home docks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Car mount
when someone actually gets one of these home charger/dock combo's and confirms they fit and work, could you please post here, with the link to the one you bought?
so many of these things are junk, and dont fit the phone, that I am afraid to try another one that doesnt work, after getting burned already
thanks
I actually bought a zuuma z4 and took it for a spin this morning. Wow that thing is solid! It stayed put even after a 120 degree turn at 20 mph!
It has an adjustable cradle with soft padding that holds my evo in place and gives it some protection.
I really only have 2 problems with it. It took me a while to figure out how to mount it properly as it comes with no proper instructions. Second, its byoc (bring your own charger).
Great for $30!!!
Sent from my PC36100 using XDA App
zuuma looks very nice...too bad they dont make a home desktop/spare battery charger
I am not buying the home dock, as I don't have a use for it...but I am buying the car mount and will report back how it works. Coming from the other side of the world though, so it will be 10 - 15 days before i report back.
omegatyrant said:
I actually bought a zuuma z4 and took it for a spin this morning. Wow that thing is solid! It stayed put even after a 120 degree turn at 20 mph!
It has an adjustable cradle with soft padding that holds my evo in place and gives it some protection.
I really only have 2 problems with it. It took me a while to figure out how to mount it properly as it comes with no proper instructions. Second, its byoc (bring your own charger).
Great for $30!!!
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Does the zuuma cover up the camera in the back? I am looking for a good dock so I can video some car racing (autocross).
dxearner said:
Does the zuuma cover up the camera in the back? I am looking for a good dock so I can video some car racing (autocross).
Click to expand...
Click to collapse
if it does, just get the ebay one and drill a nice hole on the holder
They sale a generic universal (rebranded) one at Wal-Mart that clamps on to the phone with thick foam padding. It's pretty stable and clips securely into the vents (or screws in / etc). It's like $9.99. Best of all, you don't have to remove your protective case to use it, since it adjusts with a button.
Food for thought.
jedwardmiller said:
New docks are showing up on eBay now, including home docks similar to the Seido Jr. but actually made for the Evo, and a car mount made for the Evo,
Home docks
Car mount
Click to expand...
Click to collapse
I wonder if it'll still fit if your phone has a case on. If not, that's a deal breaker.
New docks are showing up on eBay now, including home docks similar to the Seido Jr. but actually made for the Evo, and a car mount made for the Evo,
Click to expand...
Click to collapse
If Car Mount is specifically made for EVO, why in the description does it say "Suction cup with lock clip to ensure your iphone 4 remains in place"
Same crap Products with different labeling
I just got my ebay order. This is the second item l got from the same seller. Unfortunately, the dock was shipped with no protective packaging, and part of the suction cup was broken. I'm hoping to get a replacement. There is a hole in the holder for the camera. Looks like the box was opened by customs, or was shipped broken because the broken piece was missing upon receipt. The holder is tight-fitting, and has 4 locking slots similar to my magellan dock. Build quality is ok for 6 bucks, but I doubt one would be able too fit an evo with a case in the holder. I have a zaggskin on mine. I previously purchased the battery charger and 2 batteries from this vendor.
Sent from my PC36100 using XDA App
I received the car dock today and it works pretty well. There is a cutout for the camera, has to holders on the bottom (or side if you leave in portrait) and a flexible clip on the top. Has the universal 4 peg holder and the large middle so if you don't like their holder or need one with a longer neck you can get one. I have not tried it in the car as of this writing, only in the house to try out the fit. It is perfect without a case - with my "Barely There" case it fits, but no quite right. I will post pictures very soon so all can see what I mean.
Easy enough...
Don't bother with this one. The fit on the car dock is tight...too tight. Left small, very tough to see, scratches. You may not notice, but I did and I am not happy with this one.
Not worth the few bucks it cost.
DealExtreme just got it in for a little cheaper. They are good with refunding your money too when it comes to problems.
http://www.dealextreme.com/details.dx/sku.40745
Does anyone know if the dealextreme or ebay car holder will work if you have an extended battery with a larger back panel?? I ordered the extended 3000 mah battery off eBay.
Also, I just wanted to point out that the eBay car dock and the deal extreme one are definitely different.
I got the car dock and I really like it. It's a snug fit but the Evo pops in and out easily enough (I did not get any scratches on it). The Evo is held very securely and does not vibrate while the car is moving. There is maximum up/down and left/right adjustment and when the best postion is found you lock it in with two big hand screws. Overall I'm very satisfied.
Still_Waters_43 said:
I got the car dock and I really like it. It's a snug fit but the Evo pops in and out easily enough (I did not get any scratches on it). The Evo is held very securely and does not vibrate while the car is moving. There is maximum up/down and left/right adjustment and when the best postion is found you lock it in with two big hand screws. Overall I'm very satisfied.
Click to expand...
Click to collapse
You forgot to tell us which one you got!! There have been a few mentioned. And can it be used with a case?
Just wanted to post this review of a mount I bought on ebay ( will get the name and link soon )
I only took one pic so far when I first got it. But it totally AWESOME!!!
It might seem a little weird to many people and it did with me at first too..
Why, because it mounts INTO the cd player of your car.. You can do other slits in your dash but its designed for your cd player..
As for the quality, it looks very stout it feels a little cheaper than it looks but after a few weeks now, in my VW golf and hitting hard bumps, it holds like a champ..
What I love about it, it will rotate either way and will angle either way..
So if my passenger wants to watch a movie or something, easily done.. Or when using navigation and Car Panel I keep it in Portrait mode..
I cannot get over the PERFECTNESS of this mount.. I couldn't DREAM of a better place to put it or mount it..
It takes seconds to install, you just slide the mount into the cd, where a cd would go and tighten the screw..
THATS IT!!
the only thing I did do was cut the bottom leg that holds the bottom of the phone as its not needed, plus I only cut the Bottom U portion of it (hard to explain) so the charger wouldn't have any pressure on it..
In anycase Ill get more pics soon, but I just wanted to RAVE about this product.. And for only 15 bucks its the best investment I made with this phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT!!
Also why I love the way this mount is, it feels like I have a flip up dvd radio.. Only better because its an EVO
I also have the Otterbox Commuter and Extended battery.. Both configurations work PERFECT.. tight and snug.
Here is the ebay link
http://cgi.ebay.com/MOUNTEK-Car-Mou...714120?pt=PDA_Accessories&hash=item230bbbd388
Is the model number MT5000? I want to make sure I have the right one before I order from the company's website.
Yep MT5000
sweet find! i'm using my unused ashtray right now, but sharp curves/brakes make it fall off. i think i'm going to bite the bullet on this one...
purchased, thanks for the tip.. -m
I friggen love this thing! Got it last week and it's the best mount you can find. Great quality!
this seems like a VERY unusual mount. So this would make my cdplayer useless while this is mounted?
randomxda said:
this seems like a VERY unusual mount. So this would make my cdplayer useless while this is mounted?
Click to expand...
Click to collapse
Yes, if mounted in the CD player, you would not be able to play a CD.
It does work very well though and puts the phone in the perfect place for me in my truck. You can also use it in other places you have room to slide the mount into.
I've been using mine daily for the past three weeks with no issues and nothing but praise.
randomxda said:
this seems like a VERY unusual mount. So this would make my cdplayer useless while this is mounted?
Click to expand...
Click to collapse
You could always pop in a tape if you felt the need.
Sent from my fist
I got http://www.amazon.com/gp/product/B003ELOOZO/ref=oss_product from Amazon. Works GREAT with my EVO and my wife's BB and instincts. For $15 it is definitely worth it.
I bought the mount that the OP gave a link to. I really like it and have ordered 2 more for friends for Christmas gifts. Easy to install (if you can call it that - you just insert it ), functional, my charger fits into the port and the mount doesn't interfere, rotates easily, sturdy. SOOooooo much better and safer to have my Evo mounted like this as I use it for navigation and streaming music.
Thanks for the info on this mount. Got one ordered last night.
chriswiegman said:
I got http://www.amazon.com/gp/product/B003ELOOZO/ref=oss_product from Amazon. Works GREAT with my EVO and my wife's BB and instincts. For $15 it is definitely worth it.
Click to expand...
Click to collapse
looks good but i wish it wasnt soo bulky
Good find, I also have the commuter case and didn't feel like taking it on and off if I got the official HTC mount.
I ordered the Mountek mount suggested by the OP. Works great, and keeps the phone in the most convenient location on my dash.
Now with a good mount I realized I need a way to connect to the car's audio system, so I just ordered an inline FM modulator. This will provide an aux in jack so I can stream Pandora, etc. I'm also thinking of wiring in a mic up near the visor so I can have a totally built-in hands-free system.
Thanks OP!
amazing reviews for it looks like itd be perfect for my tibby. ordering now
This is the best car mount BY FAR!
The green part is sticky and works with any case just about unless yours is slicked up and oiled. Same stuff on the bottom with suction.
http://www.radioshack.com/product/index.jsp?productId=10788467
The soundgate m2 worked great for my hero and I am going to use the same for my new evo. Would suggest it only if you have a case as you have to attach a coin size disk. Awesome mount!
evo, It's the poop!
drp1 said:
I ordered the Mountek mount suggested by the OP. Works great, and keeps the phone in the most convenient location on my dash.
Now with a good mount I realized I need a way to connect to the car's audio system, so I just ordered an inline FM modulator. This will provide an aux in jack so I can stream Pandora, etc. I'm also thinking of wiring in a mic up near the visor so I can have a totally built-in hands-free system.
Thanks OP!
Click to expand...
Click to collapse
Once you get it plugged into your aux in jack, you will be handsfree. At least that is how iw work for me. When I'm plugged into my (built-in) aux in calls come through my speakers, when I anser I am on speaker phone and the caller's voice is on the car's speakers. It. Is. Sweet!
I got a similar product manufactured by platinum at bestbuy, and within the first few days it started to lose its stickiness. After my phone fell out face-first onto my gear shift twice, I'd had enough. I returned it to bestbuy (at least they refund your money, no questions asked) and went looking for a better alternative.
I settled on a car dock I found at my local at&t store which I guess was designed for the iphone4. It has mechanical locking arms with a release button, good padding, a strong mechanical suction cup for mounting on the windshield, and an adjustable arm.
I am much more satisfied with the new mount, don't fear my evo falling out of it at all, and have it mounted landscape below my rear view mirror - very convenient.
Sent from my PC36100 using XDA App
i didn't see this posted anywhere, but it is hands down the best car mount out there...unless you use CDs for music
http://www.amazon.com/Mountek-MT500..._1_1?s=wireless&ie=UTF8&qid=1296490219&sr=1-1
im sure the first question would be whether it trips the autoload or not, which it does not, it isn't nearly long enough in probably 99.9% of car cd players
the thing is tight and doesn't wobble at all but can easily be removed if need be, oh and the bottom plate can be removed, so its just the two gripper thingies
its also at the perfect eye level (for me anyway: mitsubishi lancer), and doesnt obscure the view of the road at all.
Personally I use the Clingo vent mount and I think that its the BEST car mount ever! All you see is the phone not some bulky grips on the sides. These things work! Just my two cents! www.clingo.com
unfortunately due to the placement of my vents and the view obstruction (annoyance) of windshield ones, conventional mount locations are out of the question...ive seen that clingo before, and i agree it is a nice solution as well
I just bought a clingo right after I read this thread. And its awesome. Check out the youtube videos. The vibrant really sticks on harder than your crazy ex gf lol or a dog
Sent from my HTC Glacier using XDA App
Mine is not a universal mount but one just for the vibrant. I have a huge extended battery on my vibrant. Since there was nothing available, I made a custom holster out of kydex that fits it like a glove, access to all buttons, speaker and camera lens (for times i want to film my bicyling). Impossible for it to pop out. You physically have to unclip it out of the holster to release it. I made it with a 1/4" thread on the back so I can use it anywhere you would mount a camera. I made a stand just for it in and my bluetooth keyboard in my van. It can adjust from vertical to horizontal very easily. When i go biking, the holster attaches to the handlebar mount I made. It will also fit any camera tripod.
i bought this hoping to use it as a camera mount for track days with my car.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it was too shaky for my camera but if you just needed a mount for GPS or some other use, this worked very well with my phone in a TPU case. i found it for $12 on amazon
I purchased an Arkon megagrip for mine and was so pleased I ended up getting 2 more... 1 for my wife and 1 to use at work. It may have bulky pads on the side to hold it, but I know it will never let go unless I hit the release button. Perfect function and easy access to everything. Vent mounted in my car, dash mounted at work.
Sent from my SGH-T959 using XDA App
bdroc said:
i didn't see this posted anywhere, but it is hands down the best car mount out there...unless you use CDs for music
Click to expand...
Click to collapse
Thank you for sharing this. I purchased one of these and you are correct...it's awesome!
T3chDad said:
Thank you for sharing this. I purchased one of these and you are correct...it's awesome!
Click to expand...
Click to collapse
Same sentiment here. The mount feels solid there is no wobble when im using it and it holds the Vibrant beautifully. Thank you for a solid find.
That looks interesting, but I'm thinking you'd be SOL with that bad boy and a headunit like mine.
I use one of these and it works perfect:
http://www.amazon.com/Scosche-IUH3-...MFTS/ref=sr_1_1?ie=UTF8&qid=1297489443&sr=8-1 It even opens wide enough to hold my 7" Tablet! Makes an AMAZING gps like that.
bdroc said:
i didn't see this posted anywhere, but it is hands down the best car mount out there...unless you use CDs for music
http://www.amazon.com/Mountek-MT500..._1_1?s=wireless&ie=UTF8&qid=1296490219&sr=1-1
im sure the first question would be whether it trips the autoload or not, which it does not, it isn't nearly long enough in probably 99.9% of car cd players
the thing is tight and doesn't wobble at all but can easily be removed if need be, oh and the bottom plate can be removed, so its just the two gripper thingies
its also at the perfect eye level (for me anyway: mitsubishi lancer), and doesnt obscure the view of the road at all.
Click to expand...
Click to collapse
I'm in for one! but question. do i have to take out the cd in order to put this in?
no sir, you can keep whatever CD is in
I bought a Soundgate M2 mount from Amazon. Small footprint, solid and no wobble.
You do have to attach a tape on the back of the case to mount it so might not be for everyone.
You can do a search on youtube for sample installs.
bdroc said:
i didn't see this posted anywhere, but it is hands down the best car mount out there...unless you use CDs for music
http://www.amazon.com/Mountek-MT500..._1_1?s=wireless&ie=UTF8&qid=1296490219&sr=1-1
Click to expand...
Click to collapse
Mine showed up in the mail today. Simply a great mount, Thanks for the tip!
today i bought a universal mount from rocketfish. the bicycle and car mount. i think i'm going to like this thing. the arm itself looks like what turbosix has, but it has the mount itself like what most universals have with the padded sides and the legs at the bottom.
what i really like about this is that i do NOT have to take off my silicone cover when i put the phone in a landscape position. it barely fits the device when it is extended all the way. and i can have it oriented so that i can take pictures with it when i want.
I just got the offiical Samsung Vehicle Navigation Mount Car Kit
http://www.amazon.com/Samsung-Vehic...QL1FII&s=merchant-items&qid=1298670628&sr=1-1
Cost was $34.11 after activating the 10% special offer code listed on the Amazon link above. While I was concerned about comments that the audio out did not work... it works PERFECTLY on my Vibrant running Froyo 2.2 You have to read the short instructions, OK so some of us don't like to "read" and "follow" written instructions, which tells you to download the Samsung Car/Home app... make sure you get the newest version of the app which supports Froyo... and when you run the app you have to touch the speaker icon to disable the internal speaker which then enables the audio output from the headphone jack on the Car cradle... a little confusing at first BUT it is a great mount AND the app works fine also... highly recomended!
Did a video of the mount in case anyone else is still doubting this mount.
http://www.youtube.com/watch?v=wBuGj5-sQl8
The mount is simply amazing. It's all you need.
bdroc said:
i didn't see this posted anywhere, but it is hands down the best car mount out there...unless you use CDs for music
http://www.amazon.com/Mountek-MT500..._1_1?s=wireless&ie=UTF8&qid=1296490219&sr=1-1
im sure the first question would be whether it trips the autoload or not, which it does not, it isn't nearly long enough in probably 99.9% of car cd players
the thing is tight and doesn't wobble at all but can easily be removed if need be, oh and the bottom plate can be removed, so its just the two gripper thingies
its also at the perfect eye level (for me anyway: mitsubishi lancer), and doesnt obscure the view of the road at all.
Click to expand...
Click to collapse
got this as well and it works awesome!!!
ctkatz said:
today i bought a universal mount from rocketfish. the bicycle and car mount. i think i'm going to like this thing. the arm itself looks like what turbosix has, but it has the mount itself like what most universals have with the padded sides and the legs at the bottom.
what i really like about this is that i do NOT have to take off my silicone cover when i put the phone in a landscape position. it barely fits the device when it is extended all the way. and i can have it oriented so that i can take pictures with it when i want.
Click to expand...
Click to collapse
I have the same Rocketfish mount and it's pretty impressive. I use this bodyglove case and I don't have any problems putting it in the mount. The suction cup has NEVER come loose from my windshield - winter or summer - and the phone sits solid. Plus I like the ease of switching the mount from landscape to horizontal.
But after watching the Clingo video, I'm already considering buying one.
Damn. I want one and they are all out everywhere
How do you mount nexus 5 in your car. Post!
I'm using this: a 2 in one mount.It's an aged mount for my old s3, but it also fits new nexus 5 perfectly.
I have used this a number of times now. It holds the phone very solid.
http://www.wowparts.com/new-univers...4s-samsung-i9300-note-2-n7100-blackberry-z10/
http://forum.xda-developers.com/showthread.php?t=2302206
RAM X-Grip
I love my Tetrax FIX. I don't have my Nexus 5 yet (arriving tomorrow), but my wife and I both have Tetrax FIX's in each of our cars, as well as the attachments on our two current phones (HTC Evo 4G LTE & Samsung Galaxy S3). I'm assuming the Nexus 5 will still work with the Tetrax, as it is designed to be minimal and universal.
I usually wait for ProClip to come out with a new phone holder.
http://www.proclipusa.com/
+1 for proclip. I am using the iPhone proclip holder and holds the nexus decent.
omadhaun said:
I love my Tetrax FIX. I don't have my Nexus 5 yet (arriving tomorrow), but my wife and I both have Tetrax FIX's in each of our cars, as well as the attachments on our two current phones (HTC Evo 4G LTE & Samsung Galaxy S3). I'm assuming the Nexus 5 will still work with the Tetrax, as it is designed to be minimal and universal.
Click to expand...
Click to collapse
Problem with these magnet solutions is that they interfere with wireless charging. :crying:
bleuiko said:
Problem with these magnet solutions is that they interfere with wireless charging. :crying:
Click to expand...
Click to collapse
Oh crap, I didn't even think about that! Thanks for pointing that out bleuiko. I've been planning to use both the magnet car dock and the wireless charging, but now I'm going to have to make a decision between the two...
Pro clip. Just waiting on the to make the Nexus 5 dock.
Here's my N4 rig which is not surprisingly also my N5 rig. In my 2006 Mazda 6. Simply blocked the middle vent with a round plastic disc and attached the clip with it's suction cup.
Clip from here: http://www.amazon.com/gp/product/B004M8ST18
Album here: http://imgur.com/a/u1AVO#0
using MONTAR : http://www.amazon.com/WinnerGear-Universal-Smartphones-Windshield-Blackberry/dp/B00BZWW3ES/ref=sr_1_1?ie=UTF8&qid=1383688782&sr=8-1&keywords=montar
or this one for UK :
http://www.amazon.co.uk/Universal-Smartphones-Windshield-Dashboard-Blackberry/dp/B00BZWW3ES/ref=sr_1_1?ie=UTF8&qid=1391757748&sr=8-1&keywords=montar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
omadhaun said:
I love my I don't have my Nexus 5 yet (arriving tomorrow), but my wife and I both have Tetrax FIX's in each of our cars, as well as the attachments on our two current phones (HTC Evo 4G LTE & Samsung Galaxy S3). I'm assuming the Nexus 5 will still work with the Tetrax, as it is designed to be minimal and universal.
Click to expand...
Click to collapse
I have been using Tetrax for years on my iphone and my s4. I use an x-way version so i can landscape the phone easier. main issue issue get getting the dam metal dots to stick to the cases It generally boils down to a good chunk of crazy glue. Main issue is i plan to use wireless charging with it and i don't think having a steel disk glues to back of phone/case most likely will impair that. I was looking at buying an I-bolt.
proclip for sure. that's the only mount that will ever go in my car
*EDIT*
turns out it fits in my Nexus 4 proclip mount... but Google/LG decided to flip the micro USB port so i can't use the same hardwired charging cable (it's a right angle plug) without cutting it open, which i'd rather not do... but it fits, just no charging :-/
Just an fyi, according to the proclip facebook page, a person asked if they would get one for the N5 and they said they had picked up two devices and should have a mount ready in 4-6 weeks. They said updates on the nexus 5 proclip would be available via the facebook page.
I've just received one of these:
http://www.amazon.co.uk/gp/product/B007Y94CPO/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1
The quality is great, and because it's universal i won't need to buy a new mount for every new phone in future! The arms are spring loaded and released by a button on the back. Put the phone in, squeeze the arms together and it holds the phone perfectly. There's also a really nice rubber padding on every part that's in contact with the phone.
Most of the Amazon reviews are really positive too. I can't see there being any issues with it even after years of use. It really is a solid product! :good:
I believe the most convenient solution would be to use a Qi car dock: no connection needed and accommodate most cases. I looked around a little but but haven't found many options that look like they wont break down in a year
There is This one
That one (more expensive)
And This incredibly expensive LG official solution. (it got me thinking about making my own...
Any thoughts ? I really don't want to connect and dusconnect usb cables all the time ...
I bought this a while back for my GS4.
Works really well even with my ringke slim on the GS4.
To my surprise, it works with the N5 and without adding the thin metal plate as the N5 has the steel discs already built into it. It's not super strong like using the thin metal plate, but it holds fine.
The material on the mount (on top of the magnets) is also like that of the back of the N5 so it does rotate fairly easily once mounted so maybe in a landscape view, if not centered, it would move some on a bumpy road.
dispatch said:
Here's my N4 rig which is not surprisingly also my N5 rig. In my 2006 Mazda 6. Simply blocked the middle vent with a round plastic disc and attached the clip with it's suction cup.
Clip from here: http://www.amazon.com/gp/product/B004M8ST18
Album here: http://imgur.com/a/u1AVO#0
Click to expand...
Click to collapse
FYI the N5 is polarized differently than the N4. I realized this today driving to work in the SNOW. I can't see the screen at all when the phone is in landscape mode and I'm wearing polarized sunglassses. I don't particularly like portrait in the car, but my tasker/rotate workaround which isn't perfect (for google's RIDICULOUS decision to rip car mode out of android) coupled with the polarization issue will force my hand.
This clip rotates easily, thankfully. I know for many of you charging in the car dock is a must. For me I've learned to live without it.
i use the brodit proclip from my nexus 4 fits perfect
I absolutely love my Kenu Airframe so far. I'll have to see how it works in the winter with hot air from the vent blowing on my Nexus 5.
http://www.kenu.com/products/airframe
I use the Mountek nGroove - goes into the CD slot.
http://www.mountek.com/Mountek-nGroove-Grip-Universal-Smartphones/dp/B004G1L52Q
I'm moving from my Nexus 5 and magnetic wireless car mount , how are people mounting these in the car? Biggest thing i'm going to miss with the N5..... I've always had a magnetic mount in the past. Maybe I go back to the Tetrax Xway I have if I can figure out how to get it mounted, just hate sticking anything to the back of my phone...
I used a Mountek nGroove before discovering the Nite Ize Steelie magnetic mount. The nGroove worked well. I'm not sure whether or not the One will fit being as big as it is. I'll try and dig mine out of storage and test the fit when I get the phone this week.
nGroove - amazon MT5000-E. I notice they have a "snap" style now. I'll have to check it out. I love the Steelie but not sure if I want a magnetic on the back of the One. It worked great on the Moto X though. I might just get two cases. One for the magnet and one for regular carry.
bought two of the nGroove, just did not work for my wife's crv or my gli, fell out too often.
lensgrabber said:
I used a Mountek nGroove before discovering the Nite Ize Steelie magnetic mount. The nGroove worked well. I'm not sure whether or not the One will fit being as big as it is. I'll try and dig mine out of storage and test the fit when I get the phone this week.
nGroove - amazon MT5000-E. I notice they have a "snap" style now. I'll have to check it out. I love the Steelie but not sure if I want a magnetic on the back of the One. It worked great on the Moto X though. I might just get two cases. One for the magnet and one for regular carry.
Click to expand...
Click to collapse
The cheapest suction car mount from Ebay works great with my OPO!
Cheap and effective!
I'd get a techmatte progrip dashboard mount. That's what i've been using
I actually popped off the battery cover on my OPO & placed a metal plate that comes with the Mountek magnetic dock under the cover. Fits perfectly & the OPO sticks far better than the Nexus 5 ever did.
dboss007 said:
I actually popped off the battery cover on my OPO & placed a metal plate that comes with the Mountek magnetic dock under the cover. Fits perfectly & the OPO sticks far better than the Nexus 5 ever did.
Click to expand...
Click to collapse
I saw a magnetic mount at the store. I like the idea.
Do these magnetic gadgets interfere with NFC, bluetooth of anything else on the phone?
JeffDC said:
I saw a magnetic mount at the store. I like the idea.
Do these magnetic gadgets interfere with NFC, bluetooth of anything else on the phone?
Click to expand...
Click to collapse
Nope. NFC & all other functions work normally.
dboss007 said:
Nope. NFC & all other functions work normally.
Click to expand...
Click to collapse
Thank you.
ejkeebler said:
I'm moving from my Nexus 5 and magnetic wireless car mount , how are people mounting these in the car? Biggest thing i'm going to miss with the N5..... I've always had a magnetic mount in the past. Maybe I go back to the Tetrax Xway I have if I can figure out how to get it mounted, just hate sticking anything to the back of my phone...
Click to expand...
Click to collapse
I have the Mountek CD slot magnetic mount and love it! I popped off the swapstyle cover and put the metal plate on the battery and put the cover back on. It works PERFECT. It is next to impossible to tell that the plate is in there, it all just came together perfectly. I hate running around with cases for my phones and was so happy this worked for me.
NFC will not work while on the mount, magnet interferes, but outside of that it works fine for me.
I also had a Nexus 5 and put one of those adhesives inside the OPO
Works amazing since the magnet has huge strength
I'm using the Xenomix SHG-S5000 Smart phone Mobile Mount Holder for Car CD Slot bought from ebay. I was using that for my small galaxy s and now for Oneplus. I'm very satisfied even though I should be carefull when I place the Oneplus on it as it is the biggest phone that this holder can hold...
I use the new Belkin one (a copy of Kenu Airframe+).
It works in my ford focus (4th gen, post 2014) but honestly, stick to the original one (the Kenu Airframe+) which is more convenient.
And it depends on your car too.
I'm using Brodit mounts since my Nokia N900.
This passive one for OPO: http://www.brodit.com/product.html?id=511648&pn=prod&brand=OnePlus&model=One (They also have active ones with USB built in) and then a Proclip which fits your car (this one in my case http://www.brodit.com/product.html?id=854890&pn=prod&brand=Seat&model=Leon&year=2015). If you change your phone or car you only have to change half of the mount.
question about compatibility with my car
I have a 2013 Hyundai Genesis Coupe, and I am concerned the mountec groove snap 3 would block the view of my cars touchscreen. Here is a pic of the dashboard where the cd slot is, sitting immediately below the touch screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How would this work with the mountec mount? Or from the dash layout can you see what other options might work in this situation?
I have the mountec snap 3 and all depend how you put it. Basically, if you put the tightening bolt down the phone will definitely be below the touchscreen. The only problem will be that the buttons will be block a little, but most of those functions can be accessed from the buttons in the steering wheel. I hope this info help.
I got the mount. Doesn't fit very well in CD slot. Comes out easily. Working on other ideas now
I grabbed the iOttie One Touch 2 mount from Massdrop. Took awhile to get, but got a great price. Looks like they'll be doing another drop soon if you're interested in that. https://www.massdrop.com/buy/iottie-one-touch-2?s=iottie
RRuszczyk said:
I grabbed the iOttie One Touch 2 mount from Massdrop. Took awhile to get, but got a great price. Looks like they'll be doing another drop soon if you're interested in that. https://www.massdrop.com/buy/iottie-one-touch-2?s=iottie
Click to expand...
Click to collapse
I dont really care for for the car mounts that require a suction cup. I prefer a vent mount or something like that.
car mount
ejkeebler said:
I'm moving from my Nexus 5 and magnetic wireless car mount , how are people mounting these in the car? Biggest thing i'm going to miss with the N5..... I've always had a magnetic mount in the past. Maybe I go back to the Tetrax Xway I have if I can figure out how to get it mounted, just hate sticking anything to the back of my phone...
Click to expand...
Click to collapse
In Spain we haven't nothing to do this... could you fix it?