Installed the tmobile samsung galaxy SII USB drivers , I am using windows vista and it does not recognize the phone. I tried another vista computer it still can not recognize it. I tried an XP computer, it still can not recognize the phone.
How do I fix this?
Tried using the USB utilities under settings --> wireless and network
Still no luck
any suggestions will be appreciated
tomasitoc said:
Installed the tmobile samsung galaxy SII USB drivers , I am using windows vista and it does not recognize the phone. I tried another vista computer it still can not recognize it. I tried an XP computer, it still can not recognize the phone.
How do I fix this?
Tried using the USB utilities under settings --> wireless and network
Still no luck
any suggestions will be appreciated
Click to expand...
Click to collapse
since you install the drivers into multiple computers and tested them all... it might be your phone.
First can you give more detail on what happens when you plug your phone in? Does your computer make any sounds or searches anything?
ALSO Try installing kies.
if that doesn't work either... looks like you need a warranty exchange
Try using an oem Samsung usb to micro usb cable. I had this problem with my Samsung Galaxy Epic a while back. Everytime I used a generic cable lying around my computer would not recognize my phone. When I used a Samsung cable it worked. Your computer should automatically identify your phone using the right cable. If not re-install them and don't forget to restart your computer before attempting to connect to your computer again. Good luck.
I've had this problem too.
Initially I had kies installed and had to launch the program to access the two 'mounted' removable drives.
I assume the drives mount, but you can't access the drives?
If that's the case, look on the phone and pull down the status bar and check to see if it sees the USB connection. Select that, and allow it to connect as USB storage.
thanks guys for all the quick response.
The problem seem to fix itself. After removing and attaching the USB cable a number of times, the PC suddenly recognized the phone.
I don't know what fixed it.
Now, I can proceed to root my phone!
tomasitoc said:
thanks guys for all the quick response.
The problem seem to fix itself. After removing and attaching the USB cable a number of times, the PC suddenly recognized the phone.
I don't know what fixed it.
Now, I can proceed to root my phone!
Click to expand...
Click to collapse
you probably didn't give it enough time for the pc to actually install the needed components.. it takes a good 5-10 mins for everything to finish installing
I'm faced with the same problem. Only different is, as soon as it shows connect to usb from the notification bar if goes away. I tried the usb tool in wireless but still wont work. I tried the samsung cable as well
know it sounds dumb, but have you rebooted lately? mine wouldnt recognize the sd card when plugged into comp....rebooted....all is well
Related
I was trying to put the hum/hiss sound fix on my sd card and I cannot get my pc to connect via USB...
My wife has a TP2 and it connects fine...
I have tried with/without the sd card in, rebooted the pc and phone, rebooted the phone while connected to the pc.... nothing...
wtf...
anyone else with this problem?
PS... NRGZ28 had posted a very basic rom for booting to android back in Feb and it is now gone from hotfile. Anyone know of a quick boot into android?
- Try a different computer
- Try a hard reset
That are the first thing you should do.
Tried hard reset...
Dif PC is not an option at the moment... I have rebooted...
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
FarBeyond said:
Just flashed the ROM (NRGZ newest, thank goodness I had it on my SD card) and I still cant get it to sync...
I have attached the USB error I am getting... (Win7, new install)
The phone is not asking if I want to active sync or use as storage???? wtf...
Click to expand...
Click to collapse
Reboot your PC? lol bet your tried that already...
Try this:
settings > connections > usb to pc > and disable Faster Data Sync then try. This way uses the generic usb drivers and maybe it will connect.
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
FarBeyond said:
That did not work...
How do I get my Win7 laptop to see the phone with Android on it?
Click to expand...
Click to collapse
dont think thats working yet
Ya I don't think that works yet, it's tied to Android software drivers and the use of the USB port, since there is no drivers to control the port only to charge battery. Windows thinks there is something there, but the phones USB can't communicate back....I think this is the issue or at lease after playing around with it on my phone anyway
Not that it's a huge amount of help but might troubleshoot down to the hardware level...if you go into bootloader mode on the phone and connect to USB does it connect?
I don't think you should go that deep and dirty. My touch pro 2 works only with only 1 (non-HTC) cable of the 10 i have at home, all are the "standard" mini-USB but only one works flawlessly for communicating/flashing/syncing, the other cables either do the same error - device not recognized - or windows says that the device could communicate faster - and only copies files slowly.
All in all: you should simply check with another USB cable or if you have the factory HTC cable try it with that. I noticed that the cable i am using other than the HTC one is a very good quality thick (low-resistance and double-shielded) USB cable and it never failed on me.
One other thing you should definitely watch for: plug the USB cable into the motherboard USB port directly (on the back of the PC where you plug the keyboard, mouse etc.), sometimes PC cases with front panel USB outputs simply die, or are wrongly attached to the motherboard USB header and it can cause the aforementioned problems too, not to mention if it is wrongly attached it could harm your phone too.
I'm currently on DK28 and anytime I plug my phone into my computer via USB cord it just shows that it's charging. This is an issue since I would like to switch to EB13 and I need to be able to use Odin for the EB13 modem. I've tried uninstalling and reinstalling the Samsung drivers several times and not just on this computer, on two others that I have. I've also tried multiple usb cords and it's all the same thing. I've Googled the problem and everything I've tried has been useless to me, including the PDANet thing. So my question is is there any other way for me to be able to update to an EB13 rom without having to connect via USB? Or does anyone have any other ideas as to how I can fix this? I've been just using a microSD card adapter to put things on my SD for awhile now so that's never been a problem but I can't use Odin unless my computer recognizes my phone I guess.
HELP!!
Willieumm said:
I'm currently on DK28 and anytime I plug my phone into my computer via USB cord it just shows that it's charging. This is an issue since I would like to switch to EB13 and I need to be able to use Odin for the EB13 modem. I've tried uninstalling and reinstalling the Samsung drivers several times and not just on this computer, on two others that I have. I've also tried multiple usb cords and it's all the same thing. I've Googled the problem and everything I've tried has been useless to me, including the PDANet thing. So my question is is there any other way for me to be able to update to an EB13 rom without having to connect via USB? Or does anyone have any other ideas as to how I can fix this? I've been just using a microSD card adapter to put things on my SD for awhile now so that's never been a problem but I can't use Odin unless my computer recognizes my phone I guess.
HELP!!
Click to expand...
Click to collapse
Have you gone into settings, applications, development and unchecked USB Debugging?
I also have read numerous times where people have found the USB connector on the phone had something bent and was preventing a full good connection.
Good luck
You have got to be missing something drivers can be 32 or 64 bit make sure you have the right one for your computer. Is usb debugging checked in settings/app/development. Randy Shear has alot of step by step stuff for on youtube that might help
Yeah I have USB debugging checked and my computer is 64 bit which is also what my drivers are.
Turn off anti virus and dl driver again thats what I had to do. Reboot both devices also
Willieumm said:
Yeah I have USB debugging checked and my computer is 64 bit which is also what my drivers are.
Click to expand...
Click to collapse
UN checked?? if it is checked, you can't use mass storage
jdelano said:
UN checked?? if it is checked, you can't use mass storage
Click to expand...
Click to collapse
Tried that too and apparently that wasn't the problem. :\
I read where one person who was having something like this was told to turn their computer off; plug in the phone to the usb and turn the computer on and it worked.
Maybe try that?
I've had this problem, got real annoying after a while. I ended up reinstalling the drivers and turning off usb debugging and it would go into mass storage. Re enabled and tried again, and it continues to work.
Thanks for trying to help guys but unfortunately neither of those things worked either.
I had this problem. I flashed a different ROM (try downloading a new ROM from the phone) then flash it after following the appropriate instructions.
The ROM I had that problem with was Nebula ROM, I fixed it by flashing Bonsai v2.0.
Well I have now tried that as well and even that didn't work. This is so ****ing annoying.
Willieumm said:
Well I have now tried that as well and even that didn't work. This is so ****ing annoying.
Click to expand...
Click to collapse
Try flashing another ROM instead of Bonsai. I hate that you're stuck, but I'd try a few more ROMs before giving it to a Sprint Store.
I had this problem as well and did everthing mentioned here as well to no avail.
Now here's what worked for me.
First, install drivers on another pc (ensure that you connect, wait for drivers to load, disconnect and reconnect your phone at least twice..sometimes a takes a couple of connects to install the drivers fully).
Next use odin to flash DK18 stock firmware. When you connect your phone..suddenly mass storage will be back again. You can then load whatever firmware you wish.
This has worked on my phone and a friend's with the same issue.
I had this happen to me on 2 different machines:
- First time: A restart fixed it
- Second time: My phone didn't like the usb ports on my work laptop's docking station. The cable would only work with the actual laptop's usb port.
Ok so I am trying to plug my phone into pc using usb cable so i can use odin. But my computer doesn't recognize my device. I've tried everything from uninstalling the drivers and reinstalling them restarted pc and phone. nothing works i did get it to read one time and was able to access my sd storage and then i tried to go into download mode and i plugged in usb cable and it didn't recognize so i got out of download mode and it didn't recognize the phone again. Then i plugged in my girls evo and it reads the phone all the time. Is there something wrong with my epic then? how can i fix that problem. seriously getting frustrated!!
Try not to double post. We will get to your issue eventually. Refer to the other case, as it has potential solutions available for your issue.
(I've dealt with this as well.)
Hello all!
First: I promise I searched the forums and google as hard as I could!
I'm running AOKP JB with CWM, although the problem was present on stock ICS from T-Mobile.
Symptoms: Computer and phone will refuse to acknowledge any connection (nothing shows up in Device Manager), except the phone will still charge. If I do the "remove the battery with USB plugged in" trick, the first time I do it, it will recognize an unknown device, but kies and adb won't recognize it. If I unplug it and plug it back in, it'll go back to not acknowledging any connection.
I previously programmed it (when I was still running stock ROM) via ADB via WiFi, but I need to be able to use ADB via USB. Besides, I can't seem to get ADB over WiFi anymore.
When I plug it into a different computer (Win7), it will, however, recognize my phone.
Earlier this year, before I ever tried programming via WiFi, it connected to my Win8 machine with no problem. I don't think it's a problem with the wifi setup though because the ROM was reinstalled and of course I've restarted ADB in USB mode in the months since...
What I've tried:
Reinstalling Kies
Reinstalling Samsung USB drivers
[^]Restarting the ADB server
Updating ADB
Trying different USB cables
Trying different USB ports
Toggling USB debugging
Toggling MTP mode
The UART thing from the dialer
Restarting the phone and the computer (of course)
Checking to see if my computer's USB drivers need to be updated
The android terminal command "setprop persist.sys.usb.config mass_storage,adb"
Pulling and replacing the battery while connected via USB
Crying in a corner
If anyone can help me, it'd be greatly appreciated! I'm all out of ideas and Google is no longer helpful =/
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
krazierokz said:
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
Click to expand...
Click to collapse
I tried on my work computer that didn't have any samsung drivers and when the "unknown device" dialog popped up it didn't do anything or install anything, nor did it show up in Device Manager. Unplugging and replugging it back in did not reproduce the dialog box. Togged USB Debugging and still no dialog box saying it recognized it.
The thing with the samsung drivers is that they're self installing so even if it popped up in Device Manager, I wouldn't be able to manually update the drivers =/
I tried MTP both with and without USB Debugging, although it also gives the option for PTP.
At this point do you think I should unroot and go back to stock? It's not been recognized on three computers now! =[
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
foltz61 said:
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Both the stock cable and a generic cable.
Similar problem
Similar problem as the OP. And hi guys, it's nice to be on these forums.
My device, when I plug it in using the stock cable, doesn't even charge. It doesn't show up in device manager, nor does it give me a notification, or say it's unsupported and bear that yellow icon. I have tried using different USB ports, I have tried the toggling USB debugging, I have tried restarting phone, computer, and taking out battery. I have tried that PDA/MODEM dialer trick. I am using 4.1.2 Jellybean, not rooted. (that WAS my goal,, until I hit this roadblock) I have not connected it to the computer in the past, it's relatively new. I'm thinking the cable is bust.
Any suggestions would be appreciated. It charges fine through a wall outlet plug, be it generic or stock.
so guys ive come to a conclusion i think its something in the samsung usb cables try getting yourself a blackberry usb cable , TRUST ME !!! ever since i got my phoness etc... tablet and yadi yadi samsung usb cables have always seemed to give me problems i think its because they are multi data/charging cables and when using the blackberry usb cable i have never ever once encountered a problem with any of my phones sd/storage problems do yourself a favor and pick up one of those cables and you will be golden !! if not then i guess im the only lucky one :LOL here you go http://www.amazon.com/Blackberry-Travel-Adapter-Micro-Cable/dp/B004VMVSYK/ref=pd_sim_cps_2 5 bucks!
Edit also one more test boot into recovery and click in the advanced menu and see if mount usb works for you in recovery mode ??
FIX (try using a generic cable)
I actually solved it on my own! After borrowing a generic cable from a friend it booted up! The Samsung cable was just not doing its thing.
yeah im telling you those cables they provide are JUNK!!! i only use my samsung to charge because they do that well but data they are str8 CRAP!! glad you got it up and going
OP
Hope OP will have the same luck as me...pray to the Android gods...
Lol:thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
I have had issues connecting the Note 4 to my PCs. I have tried multiple cables and computers. A usb error appears "Usb Device not recognized" "The last USB device you connected to this computer malfunctioned and WIndows does not recognize it." All PC's are running windows 8. I have tried connecting it via fastboot to flash to stock as well as through ADB and I cannot get anything to read the device.
Are you using the oem cable? Sometimes cheap generic cables give errors. Enable usb debugging and see if that helps. Good luck.
dteze88 said:
Are you using the oem cable? Sometimes cheap generic cables give errors. Enable usb debugging and see if that helps. Good luck.
Click to expand...
Click to collapse
Thanks but I've tried multiple. OEM and aftermakert cables. I found that when I put it in the charger it doesn't detect it as AC. I believe for some reason when the phone is connected to the PC it doesn't switch to MTP, which could cause the issue. I have wiped the phone, tried different roms, and installing plasma kernel. I am at my wits end. I have tried finding sprint's seceret number to dial, supposedly there's a menu to force MTP but I can't find it anywhere.
OK. So I couldn't connect via cable I tried flashing the stock image though mobile odin and now I lost recovery and the phone bootloops. Does anyone know a way to boot into recovery from the external SD card?
I would just flash the OF5 tar and start from scratch. http://forum.xda-developers.com/not...om-sm-n910p-stock-of5-odin-flashable-t3158114
Sounds like it's your computer.
Edit: Any other phone's Samsung or not able to connect? Does your phone charge with any or all of your cables? Hopefully the stock cable.
You need to go to Device Manager and Uninstall/reinstall the drivers pertaining to USB
Uninstall the samsung drivers
After that, unplug your powercord from the laptop
connect the phone to your usb port first and then replug your powercord and turn on your laptop
let the usb and samsung drivers reinstall(auto or manual)(if it detects it normally))
dteze88 said:
I would just flash the OF5 tar and start from scratch. http://forum.xda-developers.com/not...om-sm-n910p-stock-of5-odin-flashable-t3158114
Click to expand...
Click to collapse
I wish I could, the issue is that since I get this USB error, I can't get ODIN to detect my phone.
w7excursion said:
Sounds like it's your computer.
Edit: Any other phone's Samsung or not able to connect? Does your phone charge with any or all of your cables? Hopefully the stock cable.
Click to expand...
Click to collapse
I was able to get my Note 3 to connect with no problem, I was even able to get ODIN to detect it in Fastboot. I have one more cable I am going to try tonight, I have my girlfriend bringing it with her. I may have switched an S4 cable with the Note 4 cable. I hope this is the case.
xxSTARBUCKSxx said:
You need to go to Device Manager and Uninstall/reinstall the drivers pertaining to USB
Uninstall the samsung drivers
After that, unplug your powercord from the laptop
connect the phone to your usb port first and then replug your powercord and turn on your laptop
let the usb and samsung drivers reinstall(auto or manual)(if it detects it normally))
Click to expand...
Click to collapse
I was using my desktop, and I tried this on my laptop. Didn't work. Thanks though! I am wondering if this possibly could be a Windows 8.1 issue...
Anyways, 5.50 to anyone who gets this working.
I accidentally switched cables with my son's s4 and nothing would work. Figured it out and then I could connect to my computer. Could be the same thing lol.
w7excursion said:
I accidentally switched cables with my son's s4 and nothing would work. Figured it out and then I could connect to my computer. Could be the same thing lol.
Click to expand...
Click to collapse
I wish that was the case. I am wondering if it's a windows 8 issue now.
I'm on 8.1 pro, and my devices detects fine under cm12.1.
Have you tried going into Settings > Storage. select the 3 dot menu on the top right and force MTP or PTP detection while device is connected to PC / Laptop?