Note: The UVUAMDL update includes Samsung's silly root-restricting kernel. You'll need to downgrade it or use a custom one to avoid that.
All you need to know, folks. To get the dev options menu, and enable USB Debugging, tap the build number in About Phone until it tells you it's been enabled. You'll need the drivers. Unlike on AT&T devices, we do have a return to stock option, though it is not "virgin" as a Samsung-sourced TAR would be.
djrbliss said:
A recent root exploit I published for Motorola devices, Motochopper, should do the trick for rooting the Qualcomm-based variants of the Samsung Galaxy S4, including the AT&T, Sprint, and T-Mobile branded models.
Download the exploit here:
http://vulnfactory.org/public/motochopper.zip
Instructions:
Extract the entire contents of the zip file.
If you are using Windows, ensure you have installed the latest Samsung USB drivers available for your phone.
Ensure USB Debugging mode is enabled on your device.
Connect your device to your PC via USB.
If you are using Windows, navigate to the extracted directory and execute "run.bat". If you are using Linux or OS X, navigate to the extracted directory in a terminal and execute "./run.sh".
Approve the ADB connection from your PC on your device.
Warning:
At this point, since there are no custom recoveries or stock images available, it may not be possible to repair your device should you accidentally break it. Please be aware of this before performing any modifications to your phone.
As always, future OTA updates may remove the ability to regain root access, so proceed with caution when updating. Enjoy!
Paypal:
http://goo.gl/zBGb0
Click to expand...
Click to collapse
Motochopper is the work of Dan Rosenberg, @djrbliss. If you wish to donate, use the "Paypal" link above, as that leads to him. Do not donate to me for this package.
Do not PM Dan (or me for that matter) for any reason whatsoever. Any Q&A about Motochopper and acheiving root should be posted here or in the Q&A section.
P-O-S-T :: R-E-S-E-R-V-E-D
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original artwork by Pendulum via Gasolin3.
...for future use.
Follow me on Twitter @k0nane and @publik0!
Join the OUDHS and I on IRC at irc.freenode.net #oudhitsquad, or via the webchat link in my signature.
It worked perfectly! Thanks.
My run.bat stops at * daemon started successfully *.
usb debugging is enabled and galaxy s 4 drivers are installed.
Any idea what the problem might be?
Nevermind. I've downloaded the Galaxy S 4G drivers. However I can't find the S4 drivers for my T-Mobile version on samsung's website. Does anyone have direct link?
spankerer said:
Nevermind. I've downloaded the Galaxy S 4G drivers. However I can't find the S4 drivers for my T-Mobile version on samsung's website. Does anyone have direct link?
Click to expand...
Click to collapse
Use the drivers linked in the OP.
k0nane said:
Use the drivers linked in the OP.
Click to expand...
Click to collapse
Odd, it's still not working. It's stuck on the * daemon started successfully *
Edit: I figured it out. I actually have to use the usb cable that came with the phone.. I would've thought any micro USB cable would've worked...
Nice
Good guide...
Worked on my device, thanks!
Hi..I just needed some clarification on something before i try to root..
I bought my phone doing the payment method from tmo and have read that my phone isnt unlocked till i pay it off and get a unlock code...Is this correct or can i use this tool with no issue? Thnx....Just trying to avoid a un-needed mistake...:laugh:
SBERG117 said:
I bought my phone doing the payment method from tmo and have read that my phone isnt unlocked till i pay it off and get a unlock code...
Click to expand...
Click to collapse
Root and SIM unlock are two very different things. This gives you root.
k0nane said:
Root and SIM unlock are two very different things. This gives you root.
Click to expand...
Click to collapse
Ty for the quick response ... As I stated I just wanted to make sure i was ok to go...Again Thnx for clearing that up...
Edit - That was the simplest way i ever rooted a phone...Thnx to everyone involved in getting this done so fast.....Looking forward to all the goodies to come....:good::good::good::laugh::laugh::laugh:
spankerer said:
Edit: I figured it out. I actually have to use the usb cable that came with the phone.. I would've thought any micro USB cable would've worked...
Click to expand...
Click to collapse
Actually, when I rooted mine I used the cable from my Nexus 7 and it worked just fine.
SBERG117 said:
Edit - That was the simplest way i ever rooted a phone...Thnx to everyone involved in getting this done so fast.....Looking forward to all the goodies to come....:good::good::good::laugh::laugh::laugh:
Click to expand...
Click to collapse
Compared to the N7 root/unlock this was like cakewalk and yes. thanks for the AWESOME work!
adventure_of_link said:
Compared to the N7 root/unlock this was like cakewalk and yes. thanks for the AWESOME work!
Click to expand...
Click to collapse
Be sure to go to the original post and hit the thanks (or donate) button for the author of this exploit.
Mine says delivered! This will be done tomorrow. :good:
k0nane said:
Be sure to go to the original post and hit the thanks (or donate) button for the author of this exploit.
Click to expand...
Click to collapse
Will do :good: and a quick question: the Superuser app... is this the ChainsDD one or SuperSU? Personally I like the latter better, but otoh I'm not doing much complaining, just glad we have a root method.
adventure_of_link said:
Will do :good: and a quick question: the Superuser app... is this the ChainsDD one or SuperSU? Personally I like the latter better, but otoh I'm not doing much complaining, just glad we have a root method.
Click to expand...
Click to collapse
So which one do you like better? Isnt there a CM version now too?
Someone needs to do a comparisson on all the SUPER USER versions !
Well, I'm about to try this method! I just received my Sammy last night :} Wish me luck!
---------- Post added at 06:42 AM ---------- Previous post was at 06:36 AM ----------
Wow, after having about 6 or 7 android devices I can only say, WOW... how easy that was... Thanks for the post OP !
spankerer said:
Odd, it's still not working. It's stuck on the * daemon started successfully *
Edit: I figured it out. I actually have to use the usb cable that came with the phone.. I would've thought any micro USB cable would've worked...
Click to expand...
Click to collapse
hi,
Did you have to do anything else other than switching the cable? I am using the s4 cable but I am it is stuck at * daemon started successfully *. Any pointers?
I have installed the drivers in the OP and enabled USB debugging.
peccadillo said:
hi,
Did you have to do anything else other than switching the cable? I am using the s4 cable but I am it is stuck at * daemon started successfully *. Any pointers?
I have installed the drivers in the OP and enabled USB debugging.
Click to expand...
Click to collapse
Turn on your phone and click the dialog box that appears and tool should continue working....
SBERG117 said:
Turn on your phone and click the dialog box that appears and tool should continue working....
Click to expand...
Click to collapse
ah! Thank You! The screen turned off earlier so I thought I did not have to do anything with the phone. 5 stars to you my friend.
Related
So today we see many tablets that are very cheap and the price starts from 100 dollars and even less.
Many consumers buy them and are happy with the stock setting but some of us want to get the most of the device and we now how we call this-------exactly ROOTING
But there we get this problems like:
Who is the manufacturer?
Why there is no information about the device?
Why ADB dont work?
and so on.......
My Father picked up a EXPLORE X770 like you can see on the pictures and the specs too ( ist a A13 device ) and cost 80 euros......he buyed it as a christmas present for my mother
Its quite fast but even my mother asked me the first minutes of use: Hey can you root it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I did with these steps:
Download DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su.rar; http://forum.xda-developers.com/showthread.php?t=1601038
Download PDAnet (ADB drivers for tablets - how to install is described in the LInk); http://www.topnotchtablets.com/installADBdriver
Enable UNKNOWN SOURCES and Connect your tab in USB DEBUGGING mode, then run runme.bat file from the package.
Sit back read the on screen instructions
The device will reboot a couple of times
When the script finishes it will say "ALL DONE" Your tablet is rooted.
HIT THE THANKS IF YOU THINK THIS POST IS USEFUL ETC
Does it works with any generic tablet? I have a GT-7240 (7inch by.Genesis).
Sent from my GT-S5830i using Tapatalk 2
:good: :good: It's all good It work's for me !
Ampe a85 fashion
flaviamassa said:
Does it works with any generic tablet? I have a GT-7240 (7inch by.Genesis).
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
if on the box is written: allwinner a13 you are good to go
Problem
hello everyone I hope that you will be able to solve my problem then voila I have a A13 and i-MID ssuivi the tutorial to the letter are unknown sources and debugging enabled USB is enabled and also when I run the runme makes me starting, waiting for device
-daemon not runnig.starting it now
-daemon started successfully
and nothing happens and when I run the PdaNet puts me error 103 what? because I need after the rooter to use my external memory as internal memory.
thank you bye
http :// www. topnotchtablets .com/ installADBdriver
Dead link !
FlouSS said:
http :// www. topnotchtablets .com/ installADBdriver
Dead link !
Click to expand...
Click to collapse
try click this link again http://www.topnotchtablets.com/installADBdriver
the link just work fine with me
HIT THE THANKS IF YOU THINK THIS POST IS USEFUL ETC
Click to expand...
Click to collapse
Hit that thanks button for ya
Thanks so much!Finally i have gotten the adb drivers working and rooted it for my
Allwinner A13 Nuclear Android 4.0.4
THANK YOU!
Ravage32 said:
Hit that thanks button for ya
Thanks so much!Finally i have gotten the adb drivers working and rooted it for my
Allwinner A13 Nuclear Android 4.0.4
THANK YOU!
Click to expand...
Click to collapse
thank you so much sir..i have been searching for this since day one :highfive:
I got giving an a13 M010SQ8 it came rooted running ics 4.0.4 did any of you try root checker first ? mine is also nuclear build and from what iv been reading every a13 must be different
Sent from my M010SQ8 using XDA Premium HD app
My friend bought the same as you recieved and it didn't came rooted.
Some of those chinese clone bunnys are some not i quess.
Sent from my shooteru using Tapatalk 2
I'm not going to bother with cwm recovery or flashing jellybean there isn't any working firmware and I don't think there will ever be
Sent from my GT-S5830 using xda app-developers app
brewy said:
I'm not going to bother with cwm recovery or flashing jellybean there isn't any working firmware and I don't think there will ever be
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I dont think its worth to try even a JB rom because you might end up without touchscreen working etc......i left it at 4.0 and end of story
Sent from my shooteru using Tapatalk 2
thanks
worked
for VIGO 10 tablet
So , i guess its not gonna work with my i-life wtab 702 running on jb 4.1.1 .
any possibilitiy to root this?
Thanks so much !
HYUNDAI A7 ART ICS 4.0.3 rooted Fine !
:good:
ROOT only: AllWinner (A13) TWD_MID 2G Tablet
gesange said:
So today we see many tablets that are very cheap and the price starts from 100 dollars and even less.
Many consumers buy them and are happy with the stock setting but some of us want to get the most of the device and we now how we call this-------exactly ROOTING
But there we get this problems like:
Who is the manufacturer?
Why there is no information about the device?
Why ADB dont work?
and so on.......
My Father picked up a EXPLORE X770 like you can see on the pictures and the specs too ( ist a A13 device ) and cost 80 euros......he buyed it as a christmas present for my mother
Its quite fast but even my mother asked me the first minutes of use: Hey can you root it?
View attachment 1566537
View attachment 1566538
View attachment 1566539
View attachment 1566540
View attachment 1566541
So I did with these steps:
Download DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su.rar; http://forum.xda-developers.com/showthread.php?t=1601038
Download PDAnet (ADB drivers for tablets - how to install is described in the LInk); http://www.topnotchtablets.com/installADBdriver
Enable UNKNOWN SOURCES and Connect your tab in USB DEBUGGING mode, then run runme.bat file from the package.
Sit back read the on screen instructions
The device will reboot a couple of times
When the script finishes it will say "ALL DONE" Your tablet is rooted.
HIT THE THANKS IF YOU THINK THIS POST IS USEFUL ETC
Click to expand...
Click to collapse
THIS IS FOR (ROOT ONLY) ALLWINNER (A13) TWD_MID 2G TABLET w/ ICS 4.0.4
I never could find firmware from AllWinner (hopefully it's OK to provide their site: allwinner & allwinnertech dot com), never could find usb driver(s) & never could get the tablet or my pc to recognize each other (nothing here worked). Frustration & ignorance made me wonder why you have to have a pc to root an android device. I still don't have that understanding. What I DO have is an .apk that successfully rooted this tablet - here's the what & how:
1) dl these on the tablet: "framaroot 1.5.1" (available here courtesy of Alephzain - THANK YOU), a file manager if you don't have one (I have ASTRO), and "Root Checker" (free, google play store)
2) pre-root tablet settings: settings>dev options> enable USBdebugging
settings>security> enable unknown sources
3) run framaroot - in a blink it's done. run root checker to verify. go back into settings & uncheck usbdebug & unkn sources
There wasn't much to rooting this device - I wanted to practice on something before attempting anything exotic on my LG MS910 (MetroPCS).
This tablet already has ICS & I won't be too surprised if there never is a JB ROM that works 100% (I keep reading about touchscreen issues) but I'm learning & little successes like this are motivating.
Allwinner a13 rom
Hi thanks for your post but I have a different problem. After spending my time on googling I managed to confim the model chipset. However my tablet is stuck in bootloop and I am unable to get into recovery mode. Is there any software like restore binary for MMX canvas where you can flash rom while tab is turned off. I just want to install a recovery and turn on the tablet.
Nice job works with trio stealth g2 7inch tab
Sent from my G2 using XDA Premium 4 mobile app
Thanks a lot, this really worked for me!!!
Bought a Certified 7" MID-73005 tablet with an RK3168 chip inside.
I could not find a root method... I couldnt even find the right USB drivers.
Found the method for the RK3188, which is the quad core variant of the 3168.
Tried it, and it works perfectly! Rooted baby!
http://www.slatedroid.com/topic/88850-rooting-rk3188-tablets/
Just thought others might like to know, seeing as these chips are still fairly new and not much out on them yet.
resinis said:
Bought a Certified 7" MID-73005 tablet with an RK3168 chip inside.
I could not find a root method... I couldnt even find the right USB drivers.
Found the method for the RK3188, which is the quad core variant of the 3168.
Tried it, and it works perfectly! Rooted baby!
http://www.slatedroid.com/topic/88850-rooting-rk3188-tablets/
Just thought others might like to know, seeing as these chips are still fairly new and not much out on them yet.
Click to expand...
Click to collapse
I know this a bit off topic but, does that have an HDMI out? Currently looking into buying one.
I have the same chip and i rooted it but now i want to install cwm on it how do i do that?
resinis said:
Bought a Certified 7" MID-73005 tablet with an RK3168 chip inside.
I could not find a root method... I couldnt even find the right USB drivers.
Found the method for the RK3188, which is the quad core variant of the 3168.
Tried it, and it works perfectly! Rooted baby!
http://www.slatedroid.com/topic/88850-rooting-rk3188-tablets/
Just thought others might like to know, seeing as these chips are still fairly new and not much out on them yet.
Click to expand...
Click to collapse
THANK YOU THANK YOU THANK YOU!!!!!! Looked high and low for the steps to do this and it worked on my 7 yr old daughters Kocaso M1066 tablet!
Truly a great find!
resinis said:
Bought a Certified 7" MID-73005 tablet with an RK3168 chip inside.
I could not find a root method... I couldnt even find the right USB drivers.
Found the method for the RK3188, which is the quad core variant of the 3168.
Tried it, and it works perfectly! Rooted baby!
http://www.slatedroid.com/topic/88850-rooting-rk3188-tablets/
Just thought others might like to know, seeing as these chips are still fairly new and not much out on them yet.
Click to expand...
Click to collapse
this didn't work for me. no errors while rooting but still m tab isn't rooted. pls help...
axlina said:
this didn't work for me. no errors while rooting but still m tab isn't rooted. pls help...
Click to expand...
Click to collapse
What kind of tablet do you have?
ANDROID...A New Digital Revolution Of Incredible Developers
ianmb said:
What kind of tablet do you have?
ANDROID...A New Digital Revolution Of Incredible Developers
Click to expand...
Click to collapse
this one
http://www.intelkom.hr/opis.php?id=4696
axlina said:
this one
http://www.intelkom.hr/opis.php?id=4696
Click to expand...
Click to collapse
That has the same processor as the tablet I rooted. You use the root program that was linked to in this thread? Did your tablet reboot 3 times?
ANDROID...A New Digital Revolution Of Incredible Developers
ianmb said:
That has the same processor as the tablet I rooted. You use the root program that was linked to in this thread? Did your tablet reboot 3 times?
ANDROID...A New Digital Revolution Of Incredible Developers
Click to expand...
Click to collapse
Yes it did reboot. I don't know if this is important i didn't find this option
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://www.dropbox.com/s/pdewri7n5t97704/root2.png
axlina said:
Yes it did reboot. I don't know if this is important i didn't find this option
https://www.dropbox.com/s/pdewri7n5t97704/root2.png
Click to expand...
Click to collapse
What option...? Whatever you posted isn't showing.
ANDROID...A New Digital Revolution Of Incredible Developers
ianmb said:
What option...? Whatever you posted isn't showing.
ANDROID...A New Digital Revolution Of Incredible Developers
Click to expand...
Click to collapse
Don't you see dropbox link with an image?
this is what the pic should show
uid=0(root) gid=0(root)
-----If the ID shows as 0/root than continue, otherwise close and start again...
axlina said:
Don't you see dropbox link with an image?
this is what the pic should show
uid=0(root) gid=0(root)
-----If the ID shows as 0/root than continue, otherwise close and start again...
Click to expand...
Click to collapse
When you ran the root script on your PC did those come up as 0/root? If so you should have pressed the space bar to continue. That would have been the first reboot if I remember correctly. Then it does a second script with same as far as uid=0(root) gid=0(root) then continue by pressing space bar...2nd reboot. Then 3rd script same as above uid...gid, space bar, 3rd reboot...then you should be rooted. Make sure tablet is on and USB debugging is checked before you start and you have the device driver installed.
Basically it is asking you if you see uid=0(root) gid=0(root) after it runs each script. If so continue.
ANDROID...A New Digital Revolution Of Incredible Developers
Which root file did you download? Was it the TPsparky.rar file?
https://www.dropbox.com/s/mhue9su5ir2a21v/TPSarky-Root.rar
Just extract files and run the TPSparky.bat file as Administrator on PC.
This is the one I used and it worked first time!
Cube U9gtV - RK3188 Quad Core
Thanks. It worked perfectly for my Cube.
I only saw "uid=0(root) gid=0(root)" before the last reboot. I almost didn't realize it was there. I believe it was in the line just above the question about it being there. The first 2 reboots just told me wait until the OS loaded then press any key (spacebar) to reboot. After the last reboot, I ran an app Root Checker and it worked. Thanks again.
thanks! working on AWC 3188
works
Just tried this method on the yarvik noble mini tab07-485 and it works thank you very much.
Now I just need a cool rom.
Any ideas let me know.
Thanks.
Have tried this on CHUWI v17HD seems to work , get id 0 etc and superuser is installed however when I use supersu I get the message "The is no SU binary and SuperSU cannot install it - any solutions?
THX!
Works fine with MyAudio7 704T series tablet.
Win7 64bit op system was used.
Many thanks.
Have tried this on CHUWI v17HD seems to work , get id 0 etc and superuser is installed however when I use supersu I get the message "The is no SU binary and SuperSU cannot install it - any solutions?
Click to expand...
Click to collapse
Same by me... have u solved it please?
Gudboj said:
Same by me... have u solved it please?
Click to expand...
Click to collapse
Try updating SU through the Play store. It might work.
ANDROID...A New Digital Revolution Of Incredible Developers
ianmb said:
Try updating SU through the Play store. It might work.
Click to expand...
Click to collapse
Hi, what SU do u mean? SuperSU or what app? Can you post the link to the app, please?
SailfishOS for Galaxy Nexus (GSM)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a community port of Jolla's SailfishOS for the Galaxy Nexus.
It features a gesture-based user interface with a unique design and ease-of-use in mind.
For more information about SailfishOS please head over to sailfishos.org.
This is not an Android ROM, this is a different operating system.
It only uses parts of Android for hardware enablement (drivers).
Special Thanks to vakkov, sledges, mugna91, the Mer Project, the Nemo Project and all the fine people over at #sailfishos-porters
Release Notes:
This release is based on SailfishOS 1.0.8.19 (Tahkalampi).
The Galaxy Nexus port is considered to be of alpha quality.
Though depending on your usage it might be stabile enough for daily use.
Bug reports:
Please issue bugreports at the Nemo Project Bugzilla.
Known issues:
Due to an issue with ofono, reading from SIM does not work. You'll need to remove your PIN lock before flashing.
Setting an ambiance (color theme & wallpaper) causes hangs. Either needs the battery to be pulled, or you can SSH into the device and run:
systemctl --user restart lipstick
The startup wizard is getting skipped for now, due to the issue above.
The Jolla Store currently does not work. As an alternative you can try Warehouse for OpenRepos.
The camera does not work.
Due to redistribution issues the codec for MP3 can't shipped. To enable the codec run the following command:
devel-su zypper in gst-av
Instructions & Download:
Make a backup
Factory Reset (Wipe /data & /cache)
Wipe /system
Install CyanogenMod 10.1.3
Install SailfishOS on top:
Mirrors:
beidl.eu
Reboot
Old versions:
Alpha1:
XDA
beidl.eu
XDA:DevDB Information
SailfishOS for Galaxy Nexus, ROM for the Samsung Galaxy Nexus
Contributors
beidl, vakkov, sledges
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Created 2014-08-03
Last Updated 2014-08-24
Reserved
Changes:
August 24th, 2014:
Notification LED working
Bluetooth activation/deactivation fixed
Changes for Video playback (work in progress)
August 3rd, 2014:
Initial release
Nice & interesting..
Awesome! I'd love to check this out, as I've been following the progress in the other thread! (And because I'd actually like to check sailfish out, I never experienced Maemo and Meego so this will be an entirely new experience). However the XDA download link is unbelievably slow (Topping out at like 30 KB/s maximum on a decent internet connection). Does anyone have a download link from a service such as Google Drive/Mega/AFH? I'd be extremely thankful if someone did have a mirror, and would return the favour by uploading it. (If the OP allows for mirrors).
Justice™ said:
Awesome! I'd love to check this out, as I've been following the progress in the other thread! (And because I'd actually like to check sailfish out, I never experienced Maemo and Meego so this will be an entirely new experience). However the XDA download link is unbelievably slow (Topping out at like 30 KB/s maximum on a decent internet connection). Does anyone have a download link from a service such as Google Drive/Mega/AFH? I'd be extremely thankful if someone did have a mirror, and would return the favour by uploading it. (If the OP allows for mirrors).
Click to expand...
Click to collapse
Mirror to my private server added.
Ubuntu 14.04 recognizes the device as a ethernet cable connection..
I've played around the USB settings and all the others are charging-only.
freshgiammi said:
Ubuntu 14.04 recognizes the device as a ethernet cable connection..
I've played around the USB settings and all the others are charging-only.
Click to expand...
Click to collapse
Alright, definitely something nobody has tested, for whatever reason. As you are using Ubuntu, a quick sshfs mount to [email protected] might do it for now.
beidl said:
Alright, definitely something nobody has tested, for whatever reason. As you are using Ubuntu, a quick sshfs mount to [email protected] might do it for now.
Click to expand...
Click to collapse
Also, powering down the device while connected via USB to the PC, reboots it instead of shutting it down.
Can't try sshfs since i've just restored my Android backup bc Gnex is my daily driver, I'm sorry.
i couldnt select allow untrusted software to install warehouse. it does nothing when i select accept to allow it o settings.
freshgiammi said:
Also, powering down the device while connected via USB to the PC, reboots it instead of shutting it down.
Can't try sshfs since i've just restored my Android backup bc Gnex is my daily driver, I'm sorry.
Click to expand...
Click to collapse
As mentioned, the "Alpha" tag is pretty much justified. Thank you for testing.
Also, the "untrusted software" switch is pretty useless and installing 3rd party applications
is supposed to be done through the command line for now.
beidl said:
As mentioned, the "Alpha" tag is pretty much justified. Thank you for testing.
Also, the "untrusted software" switch is pretty useless and installing 3rd party applications
is supposed to be done through the command line for now.
Click to expand...
Click to collapse
so i have to install cm10.1.3 maguro and install the sailfish os alpha..?
cause it been 15minute it's stuck on google boot screen.
EDIT:
does it have to be EXT4..?
edit:
ah yeah it does ext4..
z3n0x1 said:
so i have to install cm10.1.3 maguro and install the sailfish os alpha..?
cause it been 15minute it's stuck on google boot screen.
EDIT:
does it have to be EXT4..?
Click to expand...
Click to collapse
Yes, I would assume it needs to be EXT4
Justice™ said:
Yes, I would assume it needs to be EXT4
Click to expand...
Click to collapse
yup correct just installed it now..
and now need to install the alternative jolla store.. the warehouse.. but i don't know how..
allow untrusted software are not working..
what i have to go.. even get the warehouse.rpm.. it still can't be installed..
z3n0x1 said:
yup correct just installed it now..
and now need to install the alternative jolla store.. the warehouse.. but i don't know how..
allow untrusted software are not working..
what i have to go.. even get the warehouse.rpm.. it still can't be installed..
Click to expand...
Click to collapse
You need to install it through the terminal, I'm not sure what the command is to install rpms of the top of my head, so googling it would probably get you an answer.
Justice™ said:
You need to install it through the terminal, I'm not sure what the command is to install rpms of the top of my head, so googling it would probably get you an answer.
Click to expand...
Click to collapse
well i got this...
after download the warehouse.rpm
goto setting > develoment > set password > save
type into terminal: devel-su -c harbour-warehouse
and type the password.. but nothing comes up
do i have to restart after save password or maybe restart after type pass word?? :silly:
EDIT:
open terminal
type cd ~/Downloads
type pkcon install-local ./downloaded-package.rpm
got "fatal error:nothing provides libsailfishapp.so.1 needed by harbour-warehouse-0.3-20.armv7h"
need the libsailfishapp.so.1.. lookfor it now..
the alpha looks smooth untill now been few hours test.. message working.. wifi.. haven't check the rest..
im still curious about how to install .rpm
z3n0x1 said:
well i got this...
after download the warehouse.rpm
goto setting > develoment > set password > save
type into terminal: devel-su -c harbour-warehouse
and type the password.. but nothing comes up
do i have to restart after save password or maybe restart after type pass word?? :silly:
the alpha looks smooth untill now been few hours test.. message working.. wifi.. haven't check the rest..
im still curious about how to install .rpm
Click to expand...
Click to collapse
I assume you'd need to elevate to root using devel-su, and then use one of the commands I've quoted below to install the warehouse rpm.
From terminal, root
Install a package
rpm –ivh packagename
upgrade a package
rpm –Uvh packagename
you can find out what the switches mean by doing a rpm --help from the command line.
Click to expand...
Click to collapse
I think -ivh would indicate installation and -uvh being the uninstall process
Justice™ said:
I assume you'd need to elevate to root using devel-su, and then use one of the commands I've quoted below to install the warehouse rpm.
I think -ivh would indicate installation and -uvh being the uninstall process
Click to expand...
Click to collapse
yes it's seems so..
i'll try you code now..
or maybe the -uvh are the upgrade..?? since it's upgrade on the code you are quote..
EDIT:
error: failed dependdencies:
libsailfishapp.so.1 is needed by harbour-warehouse-0.3-20.armv7h
so i perssume it the libsailfishapp.so.1 the problem..
http://forum.xda-developers.com/showpost.php?p=53171554&postcount=90
he's said that just copy it from /usr/lib/ . but how come even we don't have filemanager..
i'll try the pkcon install jolla-fileman (the native file manager from jolla) apprently the rpm are not there..
just maybe.. even we have the native file manager.. the missing libsailfishapp.so.1 still occur..
z3n0x1 said:
yes it's seems so..
i'll try you code now..
or maybe the -uvh are the upgrade..?? since it's upgrade on the code you are quote..
Click to expand...
Click to collapse
I must've misread it as uninstall then, yeah.
Justice™ said:
I must've misread it as uninstall then, yeah.
Click to expand...
Click to collapse
oh my im deprresed Lol
oh my now what should i do..
is there anyway that we can reach the root via computer..?
z3n0x1 said:
oh my im deprresed Lol
oh my now what should i do..
is there anyway that we can reach the root via computer..?
Click to expand...
Click to collapse
You could try and SSH in and run the commands, which may be easier, I'm trying to get the warehouse installed now
Post 1 - Information
Post 2 - Downloads and Release / Change Information
Post 3 - Bugs, Future Additions to the GUI, FAQ
PLEASE READ THE PARAGRAPH BELOW THIS LINE
It's been a few years since I made a toolkit. Since my last toolkit that I released, which was the M8, I had surgery done, graduated college and went through a ton in life. I haven't been in the Android scene in years. As much as I would have loved to, life has been hectic. I announced that I was going to release a toolkit for the HTC 10. It's been a few months since that announcement but here it is. I'm pretty sure there is quite a few kinks and bugs I'll need to fix, but I spent a lot of time on it and my eyes are tired at looking at all my code. Trying to remember how to code/script was hard enough as is, but it's definitely worth it for you guys. So to announce my software, I would like to present my toolkit for the HTC 10!
If this helped you out, Please press the thanks button and if you want, you can always donate!
FEATURES
- Install HTC Drivers
- Enter Bootloader
- Get Token ID. Register at HTCDev, login to the site and submit the Token ID.
- Unlock Bootloader (Must place Unlock_code.bin in the folder)
- Various useful commands
- Install Recoveries
User Provided Recoveries
TWRP
Kernels
User provided kernels
- Link to this thread
- Link to PM me if you need a phone unlocked
- Link to the One Development thread
- Boot Into Recovery/Bootloader/Phone
- Flash kernel/recovery/RUU zip
- Relock Bootloader (must be in fastboot)
- APK Batch Installer (Credits to hamsteyr)
- Donate to me (Hasoon2000) -> Donating to yours truly for putting time into this!
Here is a screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How To Use. THIS IS FOR THE PC ONLY. No plans ever for Mac or Linux. Sorry.
1. Download the toolkit DO NOT RENAME THE FOLDER
2. Download Winrar from here. Install it after you download it
3. Extract the folder anywhere.
4. Run the program.
Credits
- The guys at the AutoIT help forum that helped me learn how to make the script!
- Devs for making us ROMS!
- The community for being awesome!
- HTC for making us the phone so we can be a community!
- To everyone else I may have forgotten!
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
Donations
Downloads
https://www.androidfilehost.com/?w=files&flid=158224
Changes
V1.0 Released! 1-14-2017
- Initial Release
v1.0.1 released! 3-1-2017
- Updated to unofficial TWRP 3.0.3.3 (thanks to 2WildFirE for providing the link and to Captain_Throwback for creating it!)
- Updated link to AndroidFileHost
v1.0.2 released! 3-5-2017
- Updated to unofficial TWRP 3.0.3.10
Bugs
- Directory has to have one word.
Ex:
Will Work. This will solve any issues if the buttons don't work when you press them.
C:\Users\John\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
C:\Users\John_Smith\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
Will NOT work. Your directory will look something like this and buttons won't work when you press it.
C:\Users\John Smith\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
If you have 2 words, put the folder in Drive C:
Ex. This will solve any issues if the buttons don't work when you press them.
C:\Amaze_All-In-One_Kit_V2.4
Click to expand...
Click to collapse
Looking to add in the future
- More recoveries
- Makes Requests!!!
FAQs
Q - Why Did you make this?
A - To make life easier
Q - You are limited on features. Why?
A- You can always make a request!
Q - Will this work on other devices?
A - Only the fastboot commands, HTC Dev unlock (device specific) and the HTC drivers. Toolkit is made for the specific device.
Q - My Anti-Virus says your program is a virus. Is it a really a virus?
A - No. It's a false-positive! My reputation on here shows otherwise. Here's some more info if you are skeptical.
https://www.autoitscript.com/wiki/AutoIt_and_Malware
Q - Will you support more devices in the future?
A - If people REALLY want, I can make it happen. I just don't want to make anything that nobody would use.
Q - Awesome! Can I make a donation?
A - Of course! Do not feel obligated though. If you would like to make a donation, you can click the button on my toolkit or under my username.
Any feedback is always nice!
Sent from my HTC 10 using Tapatalk
My phone has unlocked bootloader, still S-ON, used the tool kit to flash TWRP.
Everything run successfully but the phone can not enter Recovery to run backup. It just restart the phone normally.
I have tried many TWRP version, but still can not enter the Recovery.
HTC 10 - US Unlocked Version.
2.38.617.6
@clv2k @hasoon2000
Use unofficial version 3.0.3.0 twrp
Read post #2
https://forum.xda-developers.com/showthread.php?p=66347165
HTC_10 & Tapatalk
clv2k said:
My phone has unlocked bootloader, still S-ON, used the tool kit to flash TWRP.
Everything run successfully but the phone can not enter Recovery to run backup. It just restart the phone normally.
I have tried many TWRP version, but still can not enter the Recovery.
HTC 10 - US Unlocked Version.
2.38.617.6
Click to expand...
Click to collapse
Were you trying to reboot into recovery through the toolkit? If so, I'll test the command when I'm back home and look at the script. Have you tried doing so manually?
Sent from my HTC 10 using Tapatalk
awesome!
hasoon2000 said:
Were you trying to reboot into recovery through the toolkit? If so, I'll test the command when I'm back home and look at the script. Have you tried doing so manually?
Click to expand...
Click to collapse
I tried to flash TWRP manually by adb command and reboot to recovery but my phone still not enter it. What's wrong with the phone
Edit: Thanks Linar10, I replace TWRP 3.03.0 to the toolkit it run successful.
Thanks Hasoon2000 for the toolkit
I used the toolkit for my wife's 10. I did everything from zero to check if everything was OK and boy, it went smooth. Thanks a lot for the toolkit and for sharing it. It rocks.
https://forum.xda-developers.com/devdb/project/dl/?id=22854 latest twrp
Powered by the 10
I figured by now most people would realize how dangerous toolkits are, and would have stopped using them.
It's much safer to not use a toolkit, and you learn a lot more by learning, and performing the commands yourself.
Why would you have an S-ON command so close to a GETVAR command? Just something someone will accidentally click.
I've see many people come to IRC asking for help, saying "I didn't do anything to set my S-ON, all I did was use a toolkit."
The laptop is full of viruses and I have to take format
HTC 10 cihazımdan gönderildi
Zanzibar said:
I figured by now most people would realize how dangerous toolkits are, and would have stopped using them.
It's much safer to not use a toolkit, and you learn a lot more by learning, and performing the commands yourself.
Why would you have an S-ON command so close to a GETVAR command? Just something someone will accidentally click.
I've see many people come to IRC asking for help, saying "I didn't do anything to set my S-ON, all I did was use a toolkit."
Click to expand...
Click to collapse
I agree in part.
Yes, you learn a lot more by studying and asking how to type the commands yourself, but I see this toolkit (hasoon's is the only one I've used) as a way to begin with all this. I mean, you have to start somewhere and this is a valid way of doing it. You click some buttons, follow the instructions and if you are careful you can be sure you won't mess anything up.
That's how I started learning until I was able to do things myself. I don't have s-off because I don't know enough to be 100% sure I won't kill my phone, so I prefer doing some things (flashing kernels) from fastboot instead of recovery and not experimenting with different radios and such.
In short, you have some very valid points, but people has to start somewhere and this one is too a good way of doing so.
the file is a .exe not a .rar?????? One-10_All-In-One_Kit_v1.0.rar.exe
hasoon2000 said:
Downloads
http://d-h.st/users/hasoon2000/?fld_id=2808#files
Changes
V1.0 Released! 1-14-2017
- Initial Release
Click to expand...
Click to collapse
Hi, I cannot download the tool, is the link down?
seawind107 said:
Hi, I cannot download the tool, is the link down?
Click to expand...
Click to collapse
Works just fine for me, bud
File ok?
Can anybody tell me that the file is ok? thats the original file of the All-in-one Toolkit V1.0 downloaded today fom the original source...
Hello I can't download the toolkit. Every time it's taking me to download some chrome addons. Seems very fishy.
The file in the previous post also seems not legit. Toolkit is supposed to be 40 MB, this file is about 1MB...smells of viruses to me.
ulmcity said:
Can anybody tell me that the file is ok? thats the original file of the All-in-one Toolkit V1.0 downloaded today fom the original source...
Click to expand...
Click to collapse
madzur said:
Hello I can't download the toolkit. Every time it's taking me to download some chrome addons. Seems very fishy.
The file in the previous post also seems not legit. Toolkit is supposed to be 40 MB, this file is about 1MB...smells of viruses to me.
Click to expand...
Click to collapse
@ulmcity , looks legit @mazdur , as long as @hasoon2000 has been doing this i dont think he'd post a bogus link especially not on xda. Follow the link in the OP and itll take you straight to dev-host, if it doesnt then YOURE doing something wrong dude. Heres the link.
http://d-h.st/users/hasoon2000/?fld_id=2808#files
Sent from my 2PS64 using XDA-Developers Legacy app
No matter how you are experienced or skilled in flashing ROM's, the things sometimes just happens. And you are here now...
Even I was aware which DDR model was my device, yes.. I did it - flashed by mistake DDR4 xbl.img to my DDR5 noodlep.
Of'coz, I wasn't that happy when I achieved it. Many googling, many searches - nothing. The only option was to return to OnePlus for repair.
But; there is a way. The idea came from Tom Marshall ( @tdm ) - he said that I can try to force "deep flash method" using EDL CABLE.
How to recover ? It's really simple.
Pre-requisites:
1. Windows 7 - 10 based PC (for msmtool) with properly installed 9008 COM port drivers.
Follow this guide to set and prepare: [OP8PRO][OOS 11AA/BA/DA] Unbrick tool to restore your device to OxygenOS
2. Buy EDL cable. it looks like that:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now to revive your toy !
1. Start msmtool, click others (as it's recommended for msmtool), choose region of your device. Get ready to start flashing.
You'll see that the line with COM port says it's not connected (yet)
2. Connect the cable to your device - but not to PC yet.
3. Press the button on the cable - It's called "deep flash" button...
4. While you are still pressing the button, connect the other side of the cable to your PC (where msmtool is opened and ready to go).
5. Release the button and you'll hear that your device is connected. Check the line with COM port and you'll see it's connected.
EDL port will be opened for about 10 seconds. so you must be ready to start the installation.
6. Start the msmtool and wait till the finish.
7. The rest is well known msmtool flashing way.
Enjoy !!!
Credits goes to @tdm , @jabashque & @AnierinB for their support.
This method shall work on EVERY QUALCOMM device, as it's QualComm thing...
Haha, thanks for the confirmation, everyone said that the ram is fried and you have to change mobo, i said that there is no proof of that, and i was right.
Btw could you share link to where you got that cable?
ppajdek said:
Haha, thanks for the confirmation, everyone said that the ram is fried and you have to change mobo, i said that there is no proof of that, and i was right.
Btw could you share link to where you got that cable?
Click to expand...
Click to collapse
Actually available on Amazon or eBay for a few bucks.
ppajdek said:
Haha, thanks for the confirmation, everyone said that the ram is fried and you have to change mobo, i said that there is no proof of that, and i was right.
Btw could you share link to where you got that cable?
Click to expand...
Click to collapse
Okay first off Qualcomm has multiple things in their source code that tell you you can ram flash your phone back secondly software can't fry hardware
Thanks @samdoc, @tdm , @jabashque ! I was able to fix my phone and get it back to working . I'm very grateful for the help and wanted to express my appreciation. Without this post, I'm not sure what I would have done. Thanks again, samdoc!
jef_00 said:
Thanks @samdoc, @tdm , @jabashque ! I was able to fix my phone and get it back to working . I'm very grateful for the help and wanted to express my appreciation. Without this post, I'm not sure what I would have done. Thanks again, samdoc!
Click to expand...
Click to collapse
I'm trying it out tomorrow myself
AkayamiShurui said:
I'm trying it out tomorrow myself
Click to expand...
Click to collapse
Good luck brother
jef_00 said:
Good luck brother
Click to expand...
Click to collapse
I'm literally about to do it right now I'm just waiting for the MSM tool to finish downloading I got official qualcomm drivers on the computer
did you have success brother @AkayamiShurui
jef_00 said:
did you have success brother @AkayamiShurui
Click to expand...
Click to collapse
Trying again I downloaded the wrong MSM lol
Thank you @semdoc for the suggestion
Because I used similar like semdoc attached image deep flash cable and followed the steps, its seems to be not work. (no new notification in Device Manager)
@jef_00 do you mind share what type of deep flash cable/ shopping link?
After wrongly flashed XBL, is that normal the phone will be hot?
(I have just unplug the battery so it won't over heat mobo)
Hi @bingchilling sure!
1. I used a hydra EDL v2 cable i get mine from AliExpress
2. Not noticed that
AkayamiShurui said:
Trying again I downloaded the wrong MSM lol
Click to expand...
Click to collapse
Aah allright
jef_00 said:
Hi @bingchilling sure!
1. I used a hydra EDL v2 cable i get mine from AliExpress
2. Not noticed that
Click to expand...
Click to collapse
Thank you @jef_00, will give it a try!
bingchilling said:
Thank you @jef_00, will give it a try!
Click to expand...
Click to collapse
no problem!
i guess im a little bit late for this party? successfully switched motherboard, but broke the screen in the process (wrong screw into wrong hole)
anyway i'll pray and hope this works on your phones cause this issue needs to be tech fckd, just switched to OP9Pro for 200 bucks, dont ask how.. guess someone in much need at ebay
Hi everyone, I might need some help here...I have a OnePlus 8T EU model and I too have flashed the wrong xbl.img (DDR5 instead of DDR4X in my case). Reading this post gave me some hope and I bought an EDL cable, looking just as the one in the picture OP posted.
My phone has never been in EDL mode before, therefore it is not showing up at all in device manager, no QHUSB_BULK, no anything. It is therefore impossibile for me to try and install the drivers by updating the device entry there, as specified in the guide.
I tried to install the drivers in several other ways, using an installer executable or manually installing the .inf files, but the outcome is always the same: after following all the steps given, MSM, as well as Device manager, do not read my device.
What can I possibly try differently here?
joker925 said:
Hi everyone, I might need some help here...I have a OnePlus 8T EU model and I too have flashed the wrong xbl.img (DDR5 instead of DDR4X in my case). Reading this post gave me some hope and I bought an EDL cable, looking just as the one in the picture OP posted.
My phone has never been in EDL mode before, therefore it is not showing up at all in device manager, no QHUSB_BULK, no anything. It is therefore impossibile for me to try and install the drivers by updating the device entry there, as specified in the guide.
I tried to install the drivers in several other ways, using an installer executable or manually installing the .inf files, but the outcome is always the same: after following all the steps given, MSM, as well as Device manager, do not read my device.
What can I possibly try differently here?
Click to expand...
Click to collapse
İssues are with your Windows and quallcom drivers probably... I remember I had to switch to safemod in order to installl quallcom drivers.
I'm facing the same issue. Flashed ddr5 firmware instead of ddr4. The phone is completely hard bricked and is not showing on device manager as well.
Will the edl cable enable the connectivity so that i can do MSM?
Ordered youkiloon hydra v2 edl cable and planning to test tomorrow.
abhi92raj said:
I'm facing the same issue. Flashed ddr5 firmware instead of ddr4. The phone is completely hard bricked and is not showing on device manager as well.
Will the edl cable enable the connectivity so that i can do MSM?
Ordered youkiloon hydra v2 edl cable and planning to test tomorrow.
Click to expand...
Click to collapse
Could you Please share the result after testing