Develop Bugs

[KANG/UNOFFICIAL][NIGHTLY] iNFINITYCM [Updated: 12.04.2012]

ABOUT THIS ROM:
This is a KANG/UNOFFICIAL CM9 version built from CM9 sources. It has some cherry-picks from Gerrit, that I find interesting and enhance the rom to be better feature wise.
I will be doing builds on daily basis (mostly on morning EU time), atleast until CM starts to rollout nightlies on normal schedule.
As I said in the beginning, this is purely been a learning experience to work with Android source and building it from the scratch.
I might be doing something completely different (own rom based on something) when I have gained more experience. If you are interested to start something, pm and let's see if we can get something out of it
WHY??
I know there are many many many CM9 roms/kangs floating around, so why did I post this? For a simple reason: It has been a learning experience for me to work with source and building android. This is my first complete android build, and I find CM9 to be a good starting point.
INCLUDED IN THIS ROM (Basic features):
- Synced to cm9 repo today 12.4.2012
- Includes all the CM9 features that have been merged until now
- Includes few cherry picks from Gerrit (see list below)
- Default CM based kernel
- The default CM9 bells and whistles
CHERRY-PICKS from CM Gerrit
- AudioManager: Handle KEYCODE_VOLUME_MUTE
- Settings: Notification light(LED) settings
- NavigationBar : Customization+ Settings
- Make the flash off indicator visible
- Makes network mode toggle work. Port from CM7.
- camera: allow setting parameter "video-size" before recording starts
- MMS: Make notifications consistent with the Gapps'.
- Phone: Disable accelerometer sensor while in-call and screen UI is off
- Fix don't interrupt ongoing PIN/PUK verification
Install instructions (first install):
1) Download zip to your phone
2) Also download GAPPS from http://goo.im/gapps
3) Boot to CWM
4) DO A FULL WIPE IN RECOVERY (a must if you are coming from another rom)
5) Flash the ROM .zip
6) Flash GAPPS .zip
7) Reboot
8) PROFIT???
About updating:
It should be safe to do "dirty flashes" between builds, unless I say otherwise. But ofcourse if you run to problems between builds, do a wipe first (use f.ex TiBu to backup apps) and try again. It's always possible that some feature gets broken or some cherry-pick ****s up things....but hey these are nightlies right?
To users/flashers
It would be nice if you could test this, and if you have some features found on Gerrit what you would like to see implemented, just post here and I'll check it out and maybe include it in the next build
I honour all feedback from you guys..the more the better so I can learn more.
DOWNLOAD:NIGHTLY 12042012​
Credits and thanks
- CyanogenMOD developers + team (for offering us the source and lot of features)
- swordrune10 for answering my n00b questions and for all the help
- Everybody else i forgot xD

Changelogs
CHANGELOGS
Nightly 12.4.2012
- Few official merges in to the source have been included in this build.
- Few fixes for above cherry picks (new patches)
Nightly 11.4.2012
- First public build
​

Nice! I will try and report back
Sent from my Galaxy Nexus using xda premium

Hemulen said:
Nice! I will try and report back
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Thanks
Sent from my Galaxy Nexus using Tapatalk 2

Thank you for the new rom!
You should maybe add a brief instruction on how to flash & (for later) update, for the less experienced users.

Vangelis13 said:
Thank you for the new rom!
You should maybe add a brief instruction on how to flash & (for later) update, for the less experienced users.
Click to expand...
Click to collapse
Good suggestion. I will add those today when i get home.
I did the OP in a little hurry si it needs some reconstruction anyway
Have you tested the build?
Sent from my Galaxy Nexus using Tapatalk 2

Glad to see finnish rom builders here. Maybe i will test it.

Cleaned the op a little bit

great to see another kang .
testing now

im here too u know, i just hang out in the cdma area actually i started on xda..

swordrune10 said:
im here too u know, i just hang out in the cdma area actually i started on xda..
Click to expand...
Click to collapse
nice!

Downloading.
Pitäähän sitä kokeilla. Saunan jälkeen...

EsPeHil said:
Downloading.
Pitäähän sitä kokeilla. Saunan jälkeen...
Click to expand...
Click to collapse
True true
Kai otit myös olutta?

Not bad. Everything works so far. Battery didn't drop at all during the night.

Building a new build...should be out in an hour..

New Build up on OP

[ROM][4.2.2][CM-10.1] OpenSEMC-U (U for Unofficial)

OpenSEMC-U (Unofficial OpenSEMC)
Android 4.2.2 (CM-10.1) for the Xperia S
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead pets, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, We will
* laugh at you. Loud and hard.
*/
THIS IS NOT CM 10.2 / Android 4.3. HEAD OVER RAYMAN's THREAD FOR THAT.​
This is an OpenSEMC build based on RaymanFX's standard OpenSEMC built off from the CM 10.1 tree. It's basically the same as OpenSEMC RC2, so it has the same features - and also problems - as RC2, except where otherwise explicitly stated below.
The idea behind this build is to give the OpenSEMC-CM 10.1 builds a better "closure", by trying to fix the most glaring and long standing bugs that were left on RC2, so that those that (like me) aren't ready to jump into the alphas of CM 10.2, and prefer using a more stable ROM for the time being can have a safe haven, until CM 10.2 (and then CM 10.3, I suppose) are stabilized...
Because of that, don't expect updates to this ROM - since it's meant as a "closure" of the CM 10.1 builds, I don't intend to update or add new features to this ROM. Maybe I'll provide bugfixes if they are relevant enough and easy enough to do. Then again, the source is posted on Github (link on the downloads section), so if you've got an itch to scratch, feel free to poke at it, and I'll be happy to merge back any changes you send my way.
With that said, here is what it brings new over RC2:
Kernel based on Kernel755 from @someone755, version R3, with the following changes:
Built with the Linaro toolchain
Merged Sony's 6.2.B.1.96 sources, and hence bringing the fix to the Vol+ bug and some tweaks to memory management
Added sakuractive governor
Removed some non-working / buggy governors
Disabled CPU overclock (GPU Scaling left enabled though)
Hangouts mute Mic fixed (also fixes some VOIP softphones that haven't worked since RC1, like CSIPSimple)
Updated blobs = lagless 1080P videos, with fast camera startup.
Fixed TWRP backup/restore
Multi-card reader support
Sync'd with latest CM sources (as of Dec 20th, 2013).
Click here to Download OpenSEMC-U​
You can flash this on top of your current OpenSEMC RC2, just wipe cache and dalvik afterwards.
Thanks
@RaymanFX : This is all his work, really. All I've done with this is cherry-picking the required commits, tweaking and fixing a few things and building it. So, 99.99999% of the work is all his (and whoever else contributed to his work). That's also the reason I decided to name this ROM OpenSEMC-U instead of some different fancy name - I've put relatively too little work into this to take any credit for it.
@someone755 : For his kernel and for inspiring me, probably unknowningly, to (finally) getting this done.
@letama : for his work and excellent documentation.
& Everyone else who helped the above in any way, at any point.
XDA:DevDB Information
OpenSEMC-U, a ROM for the Sony Xperia S
Contributors
cronot
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod OpenSEMC
Version Information
Status: Stable
Created 2013-11-01
Last Updated 2013-12-22

Awesome work mate. Thanks. This work is much appreciated.

Nice one!
Did the supoosed 'fix' I mentioned in our pm conversation work or did you figure it out on your own?
Anyways, thanks for bringing some shivering glory of up-to-dateness to my old builds

RaymanFX said:
Nice one!
Did the supoosed 'fix' I mentioned in our pm conversation work or did you figure it out on your own?
Anyways, thanks for bringing some shivering glory of up-to-dateness to my old builds
Click to expand...
Click to collapse
No, those permissions you mentioned were already in place. Analyzing more recent commits on your repo (on the CM 10.2 branch), I've given a shot at this: https://github.com/fernandofig/Open...mmit/af4cc5d1ba996e6f6ac220b3d1b39c7b6b499f4f , and sure enough, it worked. I figured it could be the problem because after talking to you I've tried using Focal and other third-party Camera apps, and they didn't have the preview freezing problem, so I figured the problem should be something in the app config.
But thanks for the help anyway, and for the kind words

If I flash the old blobs is the volume up still fixed and the purple tint in photos(both bugs in .211 firmware)?

if you can fix the video drivers that would be awesome
thanks
happy to see new dev. in the section

revan17 said:
If I flash the old blobs is the volume up still fixed and the purple tint in photos(both bugs in .211 firmware)?
Click to expand...
Click to collapse
No, vol+ fix won't be affected by flashing the extra zip. I can't say about the purple tint though, I never noticed it myself.

whats the difference between opensemc rc2 n this one...??

piyush95 said:
whats the difference between opensemc rc2 n this one...??
Click to expand...
Click to collapse
What the *#%^..
read the OP:
With that said, here is what it brings new over RC2:
Kernel based on Kernel755 from @someone755, version R3, with the following changes:
Built with the Linaro toolchain
Merged Sony's 6.2.B.1.96 sources, and hence bringing the fix to the Vol+ bug and some tweaks to memory management
Added sakuractive governor
Removed some non-working / buggy governors
Disabled CPU overclock (GPU Scaling left enabled though)
Hangouts mute Mic fixed (also fixes some VOIP softphones that haven't worked since RC1, like CSIPSimple)
Updated blobs = lagless 1080P videos.
Click to expand...
Click to collapse

can someone help me out please.
once i had the option to switch the phone on with the volume+ button, then after an update it was gone.
now it's back again but i can't find theoption anymore.
Sent from my Dell Streak using xda app-developers app

Wow, I'm actually useful for once! c:
Downloading, thanks
*flies away to mess up the governors even more*

Trying in a while!
EDIT: is sync with latest sources from cyanogen?

htcp3300fun said:
Trying in a while!
EDIT: is sync with latest sources from cyanogen?
Click to expand...
Click to collapse
Yes. Added that info to the OP, for clarity. Thanks for the heads up.

Is a fix for the slow wake up in? If not, is it really hard to fix? Cause if it is, I don't want to sound pushy Was waiting for this, thanks a lot @cronot!
Sent from my Xperia S using Tapatalk

Working great. I'm experiencing less FCs than stock! Great job!
Sent from my Xperia S using xda app-developers app

How to update it from RC2? Simply via CWM? But do I have to wipe data/cache/calvik? I don't want to lose my data.

Read OP............
Gesendet von meinem Xperia S mit Tapatalk

Thanks, now I see this ;]

China cannot download，Want to add new download address

Is possible to fix the bluetooth song info ?
I mean, when listening songs vía Bluetooth, the stereo shows 'no title, no artist'.
In OpenSEMC 10.2 , it works fine.
Thanks
Sent from my Xperia S using Tapatalk

[KK 4.4.4][ROM]Mackay ROM 4.9.13 (11-Oct-2014)

I have been sharing my CM7/CM9/CM10/CM10.1/CM10.2-based builds for some time in several thread, which culminated in the MackayROM. I continue now with KK4.4 from where I was for JB4.3. MackayROM is based on CyanogenMod sources, with several performance enhancements.
About Cyanogen: CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
If you run into errors, I may not be able to solve it!
If you know a solution to a problem, either upload it yourself to Gerrit Code Review or contact me through pm.
The ROM is based on Cyanogen sources with the following changes:
-Mackay Kernel:
-Set of cherries picked from gerrit (differing by the day)
-Some additional patches I did myself to the source code
Feature request are OK, but remember:
1. I try to stay close to stock
2. I will not include additional apps, unless they can be build from source
3. The time I spend on features depends on how much I like them myself
Although it is possible to enable ART, this is not advisable:
-Takes long to convert from Dalvik to ART on first boot
-Needs more RAM
-Can cause soft reboots
But off course, YMMV -> light users may have better luck
Changelog of 4.9.14 - 5-Nov-2014
-CM11.0 codebase of 3-Nov-2014
-TWRP updated to 2.8.1.0
Full changelog of 4.9.14 compared to stock CM11.0:
CM11.0 sources of 3-Nov-2014
Mackay kernel:
Separate kernel thread: http://forum.xda-developers.com/showthread.php?t=2532813
TWRP (2.8.1.0):
-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
Removed apps:
-VideoEditor & demo VideoFiles
vendor/cm:
-Adapt for custom MackayROM building (bootanimation, ROM&file name)
-Custom bootanimation (Thanks to Malcho)
vendor/samsung:
-Added scripts for Mackay Settings
hardware/samsung:
-F4k 720p patch for bigmem kernels
AriesParts (“Mackay Settings” in Settings menu):
Add mackay kernel settings options:
>WiFi PM mode selection
>BLX settings
>BLN activation
>Navbar selection
>Low RAM mode selection
For other projects (frameworks/base & Settings, check my github for the latest patches)
Coming from stock Samsung ROM/CM7:
-The safest way is to flash CM9 first and then flash Mackay ROM. Going directly from Samsung ROM/CM7 to Mackay ROM may lead to loosing IMEI.
Fresh install:
Can be flashed on top of any CyanogenMod build:
-Do a factory reset
-Flash ROM
-Flash gapps
-Reboot your phone
Update:
-Flash ROM
-Reboot your phone
(no wipes or other things needed, just flash & reboot)
-Custom kernels can be used only if specific for KK4.4
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-rootax for providing a high-speed server for high quality downloads
-Malcho for his kernel splash & bootanimation
Downloads:
Basketbuild
Google Apps
Nano Gapps
For those who want to theme it even further, Bejda made a Mackay splash screen!
http://forum.xda-developers.com/showthread.php?t=2214468
To download the same kernel, but then with voodoo colour, or with CWM:
Basketbuild
XDA:DevDB Information
[KK 4.4.4][ROM]Mackay ROM, ROM for the Samsung Galaxy S I9000
Contributors
kasper_h
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2013-11-16
Last Updated 2014-09-21

Reserved

10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.

kasper_h said:
10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.
Click to expand...
Click to collapse
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?

marcinowozniako said:
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?
Click to expand...
Click to collapse
Kernel is TWRP-only at the moment.
Download link on XDA fileserver has been restored. Download link on rootaxbox will take quite a bit more time, needs a full re-upload & uploadspeed is very slow ATM.

Oh.
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job

Galaxy3HELL said:
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job
Click to expand...
Click to collapse
I think this will come soon, but I won't work on that

kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet

limnaln said:
kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet
Click to expand...
Click to collapse
I always build these ROMs myself from CM sources + my own additions to CM sources, so no need for "official" CM11 builds to enable my own ROMs to be build.

kasper_h said:
I think this will come soon, but I won't work on that
Click to expand...
Click to collapse
Can I install your kernel on CM11?

marcinowozniako said:
Can I install your kernel on CM11?
Click to expand...
Click to collapse
I have no separetely flashable kernel yet...

this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?

rajeshbabushrestha said:
this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?
Click to expand...
Click to collapse
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.

thank you for this:good:

kasper_h said:
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.
Click to expand...
Click to collapse
Thanks for KK rom :good: :good:
OP's link to Gapps contains five different builds- some with ART compatibility. Is there a preferred one? ART works/tested, or better stick to delvik for a little while?

A few things I noticed:
- If I select Performance settings from Mackay app, Settings force closes.
- Orientation tile is buggy, sometimes it seems to work, sometimes not.
The ROM is very snappy, thank you very much for your work!

Kasper_h installed this rom and I have a bug. When I want to enable high-speed data connections settings crashes me the error: com.android.systemui and closing forces. Framework to overloads.

Thanks for the rom, There isnt any bug list?

Installed on CM11 and works fine.No forced closure and fast enough to be a test.

so no separate kernel 0.600

[KERNEL][4.3.x] Kernel755 | PIE | 16/12/2013

A day may come when the courage of men fails, when we forsake our friends and break all bonds of fellowship.
But it is not this day! Today, we PIE!
Kernel755​Let the adventure begin!​
KEWL FEATURES:
1,7 GHz OC!
Lots and lots of governors!
3 extra schedulers!
-O3 optimized!
Moar to come!
AWESOME DOWNLOADS:
The newest release (release, not alpha): http://bit.ly/1jccQXY
More downloads, including alphas and old releases in the changelog in the 3rd post!
FUNNY DISCLAIMER!
Code:
You are free to use this software, but it's not my fault if (when) you mess something up.
Please be careful and beware of being late to work, exploding cows and eating radioactive pie.
Kernel sources: https://github.com/someone755/Kotato/tree/jb_mr2_chocolate_rmfx
XDA:DevDB Information
Kernel755 - PIE, Kernel for the Sony Xperia S
Contributors
someone755
Kernel Special Features:
Version Information
Status: Abandoned
Current Stable Version: N/A
Current Beta Version: a1
Beta Release Date: 2013-12-16
Created 2013-12-16
Last Updated 2014-07-30

And now, a FAQ. @franciscofranco's FAQ, updated to fit our device.
F.A.Q. - Read this before complaining!
1. My phone exploded, HALP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. OMG BETTARY SUCKZ, IT DEAD IN 45 MINUTAS, HALP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
3. How do I flash this?
A: Since it's an .elf file, it's only flashable through fastboot. The general command is "fastboot flash kernel.elf"
4. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
5. Touch Control doesn't work in rXXX release, you suckas, fix plixe!
A: I don't know who you are. I don't know what you want. If you are looking for a fix, I can tell you I don't have the solution. But what I do have are a very particular set of skills; skills I have acquired over a very long career. Skills that make me a nightmare for people like you. If you leave now, that'll be the end of it. I will not look for you, I will not pursue you. But if you don't, I will look for you, I will find you, and I ignore you.
6. What's up with the kernel's name?
A: Well I have '755' in my name. So there's that...
7. I'm on stock/CM10/CM9/GB and this kernel doesn't work.
A: This kernel is ONLY for CyanogenMod 10.2 and any ROMs that came of it (like AOKP, for example). Don't flash on anything else unless you are SURE the ROM is based off of OpenSEMC's CM10.2.
8. My Locked-bootloader phone won't boot with this/I can't flash it.
A: This is a custom kernel. It requires an unlocked bootloader.
9. What app do you recommend for dealing with CPU settings?
A: Use TricksterMod. For 2D GPU OC and setting the 2nd core's governor, I recommend Kernel Tuner. Both are feature-packed and free, and if you don't mind an extra icon in your drawer, I say get both.
10. What is the difference between releases marked as a# and r#?
A: The r# releases are considered the most stable, but do not pack all the features. Because my work is rather slow, I'll add an alpha, an a# release, every time a minor change is introduced. But even if they look and feel stable, do not consider them as such. Most of them are dirty builds!!! Meant for advanced users only, so distributed in fastboot-flashable format ONLY!
11. I want to support you and your work!
A: Putting a subtle sign in your signature that you're using my kernel (or like it or have used it). Please, no big banners or anything, just the name of the kernel. That would be appreciated the most.
And now, thanks!
@RaymanFX -- helping me with nearly all issues and, of course the kernel sources. Also for an old project from which I learnt how proper GPU OC is done.
@abcdjdj -- writing a neat tutorial on how to compile kernels, and telling me about the -w flag
@letama -- adding a few new words into my dictionary (initramfs=ramdisk, did you know that!? )
@hei1125 -- for the NOVA kernel, and its' sources
@Forzaferrarileo -- for his kernel, Forzaferrarileo
@IAmTheOneTheyCallNeo, @fusionjack and @DJLamontagneIII -- for detailed toolchain and compiler flags explanation
@franciscofranco -- for inspiring me to get this done
@Wendigogo -- for SCSI and USB fixes help
@cronot -- for new logo and bringing in .96 fixes
@aebob -- for awesome logo idea
@thicklizard -- for helping with -O3
Sony and Google -- Android rules
HTC -- Inventing S-ON, forcing me to buy a Sony phone :3
@all -- for being an awesome community! C:

Changelog!
Code:
a1: [URL]http://bit.ly/1jccQXY[/URL]
-initial release
--O3
-CPU OC
-All governors from POTATO (4.2.x) kernel (lots of 'em)
-All schedulers from POTATO (4.2.x) kernel (zen, fifo, fiops)

I'll give it a try in Letama's dual boot as soon as I have time

I trust you know what you're doing, Wise one.
Still, it is dangerous to go alone. Here, take this. *Hands free pie*

Hey someone755,where are the potatoes??

Well I gotta change something from release to release

many people are moving to a cm11 based rom...
will you make a kernel for that as well?

No, not just yet.
I see 4.3 more stable, while KitKat is still in its early stages.
Also, I see KitKat will be updated more frequently, but I'm lazy, so no.

someone755 said:
No, not just yet.
I see 4.3 more stable, while KitKat is still in its early stages.
Also, I see KitKat will be updated more frequently, but I'm lazy, so no.
Click to expand...
Click to collapse
I see Kitkat gotten more stable than 4.3.. Since video recording and other issues from 4.3 are solved in it.. So probably its best either if Rayman releases a BETA version of 4.3 fixing the bugs or u switch to 4.4 kernel.. :silly: Just an opinion..

I tried your potatoes 4.2.2 kernel and it was great
Waiting for your kitkat kernel since I'm running cm11
Sent from my LT26i using xda app-developers app

Hi,
Just to be sure : this is a kernel for CM10.2 or JB-4.3 roms right ?
You ask it's an optimized -O3 built kernel. Did you solve your problem with /cache size and -O3 optimisations ? Will you build a potatoe kernel (for JB-4.2) including these optimisations ?
Cheers

Yes, it's for CM 10.2/Android 4.3 (OpenSEMC, of course),
Potatoes already have -O3
And just saw that KK is in Beta stage. Might give that a shot, Pie isn't all that popular, as it would seem.
Just need to hang in there for another week, my last part for my custom rig is just around the corner (hopefully).

Thank you for your kernel and for smooth video recording.
I very like OmniROM with your kernel.
I have only two small problems:
- TWRP is little slower than with other kernel (backup taken about 20 minutes)
- I'm not able to select "smartass v2" governor (I thik you have typo in your script, because there are two names in one row (see screenshot)

Lol sorry, I must've derped the Makefile. It'll run nightmare, not smartassv2 if you select it...
About TWRP, I don't have a clue, I never even used CM10.2...
I'll look into fixing it tonight, if I find the time.

[ROM][9-11-15][Linaro] SAOSP

About​This ROM is based on the SAOSP source and has additional goodies. and optimizations.​
Disclaimer​Use at your own risk. I take no responsibility for anything that happens to your device. However, I will do my best to deliver a stable experience with this ROM.​
Known Issues​
Blue-tooth does not work
Installation​
Reboot into TWRP 2.8.6+
Factory reset
Flash ROM
Reboot system
Wait for 2 minutes after it boots (recommended)
Enjoy!
Features​
Stock kernel
No forced encryption
F2Fs support (data and cache)
Cyanogenmod 12 Theme Engine
Cyanogenmod QS Tiles Customization
Cyanogenmod Battery Icons
Build tweaks
Much more
Optimizations​
Compiled with Linaro 4.9.4
O3
Graphite
Loop nest optimization
Cortex-a57 tuning
L1 and L2 cache tuning
Memory leak sanitizer
ROM link​
https://basketbuild.com/devs/Beta1440/Nexus9/saosp
https://romhut.com/roms/saosp-flounder
Gapps​
Aroma and mini:https://basketbuild.com/devs/Beta1440/Nexus9/gapps
Make your own:http://opengapps.org/
Google+ Community​
https://plus.google.com/u/0/communities/113769215740955801290
Credits​
Simple AOSP team
Sabermod
Linaro
Cl3Kerner
Slim Roms
Cyanogenmod
Free Software Foundation
Google
XDA:DevDB Information
Simple AOSP, ROM for the Nexus 9
Contributors
Beta1440, TheDarkDefender, snak3ater, bankai03
Source Code: https://github.com/SAOSP-L
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2015-09-11
Beta Release Date: 2015-05-29
Created 2015-06-05
Last Updated 2016-01-18

Changelogs
8-14-15​
Compiled with Linaro 4.9.4
5.1.1 r5 -> 5.1.1 r9
Enabled memory leak sanitizer
Updated Trebuchet launcher
Better theming support for text apperance
Theme engine fixes
Updated French and Russian translations
Several minor bug fixes
8-1-15​
Compiled with lastest Sabermod 4.9.4
5.1.1 r4 -> 5.1.1 r5
Updated Trebuchet launcher
ADB over network quick settings tile
Option to hide ADB icon
Better theming support for text apperance
Theme engine fixes
Updated French and Russian translations
Several minor bug fixes
7-4-15​
Compiled with Sabermod 4.9.4
Fixed bluetooth issue
Added OTA app (still testing)
Updated French and Russian translations
6-28-15​
Tweaks to "build tweaks" ui in settings
Merged in 5.1.1 r5 source
Changed default wallpaper
Bug fixes for theme engine
Misc performance improvements and bug fixes
6-14-15​
Optimized art
Optimized bionic
Trebuchet Launcher ( replaces Slim Launcher)
Compiled with UberTC 4.9.3
Smooth scroll mod
Clean flash suggested

Reserved

You bring it here, thanks. Is your kernel included?

RogueSven said:
You bring it here, thanks. Is your kernel included?
Click to expand...
Click to collapse
No, this uses the stock kernel.

Bluetooth
Can i ask why Bluetooth isn't working?

The Rom included gapps?

Hiro Nakamura said:
Can i ask why Bluetooth isn't working?
Click to expand...
Click to collapse
The short answer is I don't know.
The long answer is there used to be an official maintainer for the N9 but he left the SAOSP team a few months ago. I learned to compile Roms after his departure and I started making unofficial community builds for the N9. I suspect the issue could have been introduced during that time period when no one was build for the N9. I was not aware of the bluetooth issue until one of the members alerted me. I'm not even sure why issue even exists since bluetooth works for all the other devices supported by the SAOSP team. With that said, I submitted a bug report for the bluetooth issue and the saosp team is working on it.
As a side-note, I would have liked it if bluetooth issue was fixed before I made a thread on XDA, but seeing that there are only a few AOSP
based ROMs that are updated regularly, I decided to share my builds since the SAOSP is a good ROM.
gravin said:
The Rom included gapps?
Click to expand...
Click to collapse
No, Gapps are not included.

Beta1440 said:
The short answer is I don't know.
The long answer is there used to be an official maintainer for the N9 but he left the SAOSP team a few months ago. I learned to compile Roms after his departure and I started making unofficial community builds for the N9. I suspect the issue could have been introduced during that time period when no one was build for the N9. I was not aware of the bluetooth issue until one of the members alerted me. I'm not even sure why issue even exists since bluetooth works for all the other devices supported by the SAOSP team. With that said, I submitted a bug report for the bluetooth issue and the saosp team is working on it.
As a side-note, I would have liked it if bluetooth issue was fixed before I made a thread on XDA, but seeing that there are only a few AOSP
based ROMs that are updated regularly, I decided to share my builds since the SAOSP is a good ROM.
No, Gapps are not included.
Click to expand...
Click to collapse
Other AOSP roms had that bluetooth issue too. Maybe you can cherry pick from one of their sources. You can take a look into Lollipopalooza or noobbuilds rom thread.

Hiro Nakamura said:
Other AOSP roms had that bluetooth issue too. Maybe you can cherry pick from one of their sources. You can take a look into Lollipopalooza or noobbuilds rom thread.
Click to expand...
Click to collapse
I was able to find the commit you were referring to and now bluetooth works. Thanks for the tip!

Beta1440 said:
I was able to find the commit you were referring to and now bluetooth works. Thanks for the tip!
Click to expand...
Click to collapse
So the newest Rom on basketbuild has already the fix i guess? :fingers-crossed:

Hiro Nakamura said:
So the newest Rom on basketbuild has already the fix i guess? :fingers-crossed:
Click to expand...
Click to collapse
Affirmative, flash away!

We need also Vendor patch if we already are in 5.1.1 ?? and which gapps(x64) you suggest guys??

realy good rom!!!
---------- Post added at 05:44 PM ---------- Previous post was at 05:43 PM ----------
I use this gapps: http://download.dirtyunicorns.com/files/gapps/arm64/

Hello. Any news about new build?

When I try to download the latest ROM it take me to basketbuild but it is just a white page and when I refresh it does the same thing. I've used a couple different browsers with the same result?

phillysmako said:
When I try to download the latest ROM it take me to basketbuild but it is just a white page and when I refresh it does the same thing. I've used a couple different browsers with the same result?
Click to expand...
Click to collapse
Works for me. Tried it out using Firefox beta. https://basketbuild.com/devs/Beta1440/Nexus9/saosp

Hi, i found bug! Theme Mannager don't change bootanimation!

Martin_Devil said:
Hello. Any news about new build?
Click to expand...
Click to collapse
I've posted the changelog in my second post of this thread.

hi guys does this rom have lte support i dont see anything in op about it