The Sprint ZVC 4.4.2 .TOT is now available on the Codefire servers. TOT is used along with a .dll in LG Flash to install the stock firmware. Running this WILL erase your data including whatever is on the internal SD card.
I had to pay for this.. so donations are welcomed :highfive:
TOT (ZVC zip.. unzip it FOOL!) and .DLL can be found HERE.
Guide to use this can be found HERE. Yes, it's for Verizon but it can be loosely followed.. just replace the verizon stuff with the Sprint files.
Autoprime first rooting with your ioroot 25 now this your such a help for Sprint and others
Sent from my LG-LS980 using XDA Premium 4 mobile app
---------- Post added at 11:50 AM ---------- Previous post was at 11:36 AM ----------
So wait I just go thought on LG flash tool
Sent from my LG-LS980 using XDA Premium 4 mobile app
Donation Details - Confirmation number: 6CP664455L4491501
Thanks for all the support.
Noob question: If I use this TOT to upgrade my ZV7 to ZVC, can I downgrade it back to ZV7 using ZV7 TOT? Asking since I use the permanent unlock and if it does not work on ZVC, I will have to downgrade it.
Pat123 said:
Noob question: If I use this TOT to upgrade my ZV7 to ZVC, can I downgrade it back to ZV7 using ZV7 TOT? Asking since I use the permanent unlock and if it does not work on ZVC, I will have to downgrade it.
Click to expand...
Click to collapse
I have not done it, but I believe others have confirmed you can still downgrade.
Permanent GSM unlock will be erased if you use flash tool.
I took the OTA without root with stock recovery without GSM unlock.
Managed to root using ioroot25, flashed CDMA on NV got data for CDMA, then tried the unlock for GSM. Did not work. Now after messing around I managed to unlock GSM with data. Also found that it's either GSM or CDMA. Both for now will not work together like before.
Sent from my LG-LS980 using Tapatalk
Unrelated to the update by phone decided to brick itself while doing a backup.
I decided to go ahead and do the upgrade while I am restoring. I can get into download mode, but my computer can no see it. Installed Drivers already, just does not show up in device manager.
Anyone have any ideas on how I can get this going?
Is there a version that won't wipe all data from the phone? i made a backup but forgot to drop box it so now i need to save that if possible and then restore the firmware
pvinodnayak said:
Unrelated to the update by phone decided to brick itself while doing a backup.
I decided to go ahead and do the upgrade while I am restoring. I can get into download mode, but my computer can no see it. Installed Drivers already, just does not show up in device manager.
Anyone have any ideas on how I can get this going?
Click to expand...
Click to collapse
Change the port number for the device in the Microsoft device manager...I can't remember if it is port 41 or port 43. Give both a try!
keezy1986 said:
Change the port number for the device in the Microsoft device manager...I can't remember if it is port 41 or port 43. Give both a try!
Click to expand...
Click to collapse
It is port 41, but I can not change it as Windows doesn't recognize that a device has been plugged in at all.
New to TOT and LG in general, would I be able to use this to come from ZV8? I assume that TOT's completely redo everything so it doesn't matter (to a degree) what's on it before (except in the case of downgrading). Thanks!
lil_jimmy_norton said:
It is port 41, but I can not change it as Windows doesn't recognize that a device has been plugged in at all.
Click to expand...
Click to collapse
Try different drivers. I had to use the TOT method found here and it worked for me with no issues. http://forum.xda-developers.com/showthread.php?t=2432476
This worked where the modified OTA failed. I did need to unplug and re-attach the phone after the driver sorted itself out.
Thank you!
Hope someone makes a flashable pre rooted ROM.zip from this.
lil_jimmy_norton said:
Unrelated to the update by phone decided to brick itself while doing a backup.
I decided to go ahead and do the upgrade while I am restoring. I can get into download mode, but my computer can no see it. Installed Drivers already, just does not show up in device manager.
Anyone have any ideas on how I can get this going?
Click to expand...
Click to collapse
Try a diff computer.
Sent from my LG-LS980 using Tapatalk
pvinodnayak said:
Permanent GSM unlock will be erased if you use flash tool.
I took the OTA without root with stock recovery without GSM unlock.
Managed to root using ioroot25, flashed CDMA on NV got data for CDMA, then tried the unlock for GSM. Did not work. Now after messing around I managed to unlock GSM with data. Also found that it's either GSM or CDMA. Both for now will not work together like before.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
so if I flash to zvc, knowing the unlock will be erased, then root the phone using ioroot 25, follow the steps of permanent unlock, will it work on GSM again?
Gsm unlock
obie992 said:
so if I flash to zvc, knowing the unlock will be erased, then root the phone using ioroot 25, follow the steps of permanent unlock, will it work on GSM again?
Click to expand...
Click to collapse
Give it a shot. must work!!
can someone upload it to a torrent, i have a slow internet here, just failed @ 50% progress
autoprime said:
The Sprint ZVC 4.4.2 .TOT is now available on the Codefire servers. TOT is used along with a .dll in LG Flash to install the stock firmware. Running this WILL erase your data including whatever is on the internal SD card.
I had to pay for this.. so donations are welcomed :highfive:
TOT (zvc .zip.. unzip it fool!) and .dll can be found HERE.
Guide to use this can be found HERE. Yes, it's for Verizon but it can be loosely followed.. just replace the verizon stuff with the Sprint files.
Click to expand...
Click to collapse
what's the MD5/SHA1 sum for the TOT so I can be sure my download is good?
Wonder if this happened to anyone else. First I installed the LGFlashTool 1.8, then set my clock to 4/1/2012 and opened LGFlashTool. It says something about LG FLASH TOOL ERROR LG USB/PARELLEL. went ahead anyway and selected the .dll and .tot files and changed all the ports per instructions. Long story short, the files flashed but showed failed at 94% but phone had booted to accessibility settings and was talking to me in the weird robotic voice. I went ahead and disconnected and set up phone then rooted with ioroot25. all seems to ok but I wonder if the fail is going to be a problem somewhere down the line. I have not noticed any problems. Any suggestions?
Related
So Friday i went to verizon and bought me a new LG G3 phone, 32G memory 3G RAM, you know the good **** LOL. Well when i got home i wanted to root the phone but when i looked it up there was many options, IOROOT, TowelRoot, and Stump Root. So i tried towel root on the phone but when i clicked the button towel root said my device isnt compatible and my phones build is the VS98510B. So at that point i decided to try IOROOT. When i launched the batch file i made sure i made myself a developer, got the proper drivers, made it connect via usb and set the phone connection to Ethernet. Well in the batch file it said everything was good and that i just needed to click any button to continue well i did that but when i clicked a button it simply closed the batch file. All i clicked was the space bar and it closed. Stump root isnt compatible and im afraid to use bruteforce mode. Any one got any help with this? Andriod Kitkat 4.4.2
Use the brut force method in stump. Takes about 5 minutes.
TonikJDK said:
Use the brut force method in stump. Takes about 5 minutes.
Click to expand...
Click to collapse
But i mean is it safe? Im kinda new to the whole android rooting scene i use to use iphones and **** so i dont wanna break this phone since i just got it
Worked for me and I have not seen a single report of any problems.
TonikJDK said:
Worked for me and I have not seen a single report of any problems.
Click to expand...
Click to collapse
So when i root it do i need to back up anything? Ive heard of whats called TWRP but idk what that is
I used stump root. My phones still works. You can't install twrp because bootloader is still locked, have to wait for a way to unlock it.
ToF_Itachi said:
So when i root it do i need to back up anything? Ive heard of whats called TWRP but idk what that is
Click to expand...
Click to collapse
Read a bit here TWRP is a recovery and backup software for when you flash a custom ROM.. You're not flashing any custom ROMs just yet.. So... I don't think you need to backup anything just yet. After you root the phone you can use TWRP to backup your current stock ROM .. Good luck ..
:good:
I used ioroot with no problems. Check out this vid, pretty straight fwd on what you need to do.
sent from my VZW VS985 aka LG G3
Showtek1980 said:
Read a bit here TWRP is a recovery and backup software for when you flash a custom ROM.. You're not flashing any custom ROMs just yet.. So... I don't think you need to backup anything just yet. After you root the phone you can use TWRP to backup your current stock ROM .. Good luck ..
:good:
Click to expand...
Click to collapse
Oh okay thanks! Well i guess im off to use the stump root and use brute force
R0ck.em 5ock.em said:
I used ioroot with no problems. Check out this vid, pretty straight fwd on what you need to do.
sent from my VZW VS985 aka LG G3
Click to expand...
Click to collapse
how were you able to use ioroot with yours? Like when i tried to use it it would just close the batch file and wouldnt even work when i tried it.
ToF_Itachi said:
Oh okay thanks! Well i guess im off to use the stump root and use brute force
Click to expand...
Click to collapse
My pleasure Hope you can find root using the desired software.. I'm in Korea..using the F400k but the latest update (v10l) couldn't find root using any of the available tools.. so.. I had to downgrade to the previous (v10g) and got root again. :victory:
Showtek1980 said:
My pleasure Hope you can find root using the desired software.. I'm in Korea..using the F400k but the latest update (v10l) couldn't find root using any of the available tools.. so.. I had to downgrade to the previous (v10g) and got root again. :victory:
Click to expand...
Click to collapse
Yeah im using the Verizon Vs985 v with the 10B version. so for me idk which way to go when it comes to rooting software
After you clicked to continue in the batch file, did yout phone boot into recovery?
sent from my VZW VS985 aka LG G3
ToF_Itachi said:
Yeah im using the Verizon Vs985 v with the 10B version. so for me idk which way to go when it comes to rooting software
Click to expand...
Click to collapse
This has ALWAYS worked well for me (Besides with the latest version update)... But I don't know if it would work on your device.. Try what you have. If all fails then give this a shot
R0ck.em 5ock.em said:
After you clicked to continue in the batch file, did yout phone boot into recovery?
sent from my VZW VS985 aka LG G3
Click to expand...
Click to collapse
no the batch file simply closed on me while my phone sat there still on the home screen
I flashed a stock 4.4.2 t-mobile firmware to my sprint ls980.. is there anyway to get any ls980 firmware back on it? i use it for tmobile which is why i flashed it but seen a few threads on how to unlock the sim and now im stuck. did i ruin the phone? or could i at least get it to work through tmobile with the firmware i flashed? i cant even get it to connect to google play. wifi works tho
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
First: Grab the ZVE Tot file
Second: Flash it in download mode.
Good luck, flashing in download mode is rather a pain to do.
G2 Ls980 with tmobile firmware
Fnord12 said:
First: Grab the ZVE Tot file
Second: Flash it in download mode.
Good luck, flashing in download mode is rather a pain to do.
Click to expand...
Click to collapse
I have tried flashing a stock sprint fw but it fails because Flashtool says the mobile phone I have is a tmobile model!!.
mikon73 said:
I have tried flashing a stock sprint fw but it fails because Flashtool says the mobile phone I have is a tmobile model!!.
Click to expand...
Click to collapse
There is a DLL file that is generic that should overcome that problem.
Facing the same problem..please help
I've also done the same thing just a little bit different.
i flashed D802 (international version) kdz file over my sprint g2 (Model is LS-980) but it does not work, when i turn on the phone I can't even complete the setup and the phone restarts. touch panel is also not working right.
Now i've downloaded the stock .tot rom for sprint version and trying to flash it using lg flash tool in download mode. But it does not flash it. It detects my phone as D802 and gives the error about the model number does not match
I need help getting it back to LS-980
looking for that lg g2 sprint generic .dll file
secret.animal said:
There is a DLL file that is generic that should overcome that problem.
Click to expand...
Click to collapse
Supposedly there's a stock .kdz which I can use to extract the .dll from, but I haven't found any stock .kdz file so far.
So, this generic .dll sounds great and one of my last options left. I'll appreciate if you can point me to that file. I'm going to try to find it.
Thanks a lot!!! :good:
https://docs.google.com/file/d/0B_F3sA56Gm2HMTVXejZla3R5RDg/edit?usp=docslist_api
Tried it but failed
secret.animal said:
docs.google.com/file/d/0B_F3sA56Gm2HMTVXejZla3R5RDg/edit?usp=docslist_api
Click to expand...
Click to collapse
I've tried this .dll file with both the stock ls980zvc and ls980zve .tot firmwares.
but the flash tool gives this error "CrossDL [D802] to [LS980]. SWversion"
Is there any way around this?
Success
Successfully fixed this problem. My phone is back to life again
I explained the complete problem and the process to fix it in this post:
http://forum.xda-developers.com/sprint-g2/help/solution-flashed-wrong-firmware-lg-g2-t3056632
tauheed90 said:
Suucessfully fixed this problem. My phone is back to life again
Click to expand...
Click to collapse
Share the love for anyone that does a search will find it without having to ask.
I'm restricted by xda
secret.animal said:
Share the love for anyone that does a search will find it without having to ask.
Click to expand...
Click to collapse
The procedure I used is described and explained in this post and as i am a new member here, xda restricts me to post external links his is the the best i could do
http://forum.xda-developers.com/sprint-g2/help/solution-flashed-wrong-firmware-lg-g2-t3056632
All righty. Here it is. It's 5.0.2 and it contains the Stagefright fix as well as who knows what else. Standard warning: you probably have to be bone stock ZVG to apply this. If you are rooted, this will probably break root, if it would even install at all. I could also be completely wrong. Have fun.
Download ZVH update.zip
Updates don't install on top of root. If rooted, reflash ZVE tot, upgrade, then redo LG One Click Root.
Sent from my LG-LS980 using Tapatalk
I tried restoring my stock recovery with Autorec and using the unroot feature in SuperUser but was still unable to flash the update.
I WAS able to get the ZVH update.You can root the ZVH update, use the LS980 Autorec app to flash TWRP and flash the hotspot mod too. I tot'ed back to ZVE and let my Sprint G2 activated on Boost go through the update process. Once i was on ZVH i did the above mentioned. It took a little time and some reading but my G2 is up and running like a champ.
I have root and can't update ZVH using TWRP. Can sameone explane step by step how would be possible ?
@wetbiker7
I've upgraded to ZVH, but I can't seem to root it. I've tried a couple of the LG_Root options and LG_One_Cick_Root_by_avicohh.exe but none are working.
Any ideas?
chuddler said:
@wetbiker7
I've upgraded to ZVH, but I can't seem to root it. I've tried a couple of the LG_Root options and LG_One_Cick_Root_by_avicohh.exe but none are working.
Any ideas?
Click to expand...
Click to collapse
I'm at work right now. I'll shoot you everything you need via PM later today.
@wetbiker7
Thanks!
wetbiker7 said:
I'm at work right now. I'll shoot you everything you need via PM later today.
Click to expand...
Click to collapse
If you could also share your experience/method here as well for others to see so they can avoid issues. That would be great. As for the update I see no changes with the GPS unfortunately.
Sent from my LG-LS980 using Tapatalk
chuddler said:
@wetbiker7
Thanks!
Click to expand...
Click to collapse
No worries. Just click that Thanks tab.
EROMITLAB said:
If you could also share your experience/method here as well for others to see so they can avoid issues. That would be great. As for the update I see no changes with the GPS unfortunately.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Not sure what's going on with your GPS. I haven't had any issues.
OK. I'm working on something that'll get you guys hooked up. It'll be posted soon.
OK........ This is for the Sprint/Boost LS980. This info will allow you to root the ZVH firmware update. I have used this method on both Windows 7 and 10.
READ EVERYTHING BEFORE YOU BEGIN!!! I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE. THESE ARE THE STEPS I USED AND THEY WORKED PERFECTLY FOR ME.
You will need ADB installed on your pc. Here's an easy way to install if you don't already have ADB and Fastboot installed.
http://forum.xda-developers.com/showthread.php?t=2588979
Thanks to @Snoop05
_____________________________________________________
Maker sure you have a decent charge on your phone. I recommend 75% or more just to be safe. The entire process should not take near that but I always make sure I have enough juice in case I run into any issues.
This is only if you are rooted or your LS980 will not install the ZVH update OTA.
You will need to TOT back to an earlier build. I chose ZVE.
This thread tells you how to do it. Make sure you scroll down to the 2nd tutorial. It's the one for Sprint.
http://forum.xda-developers.com/showthread.php?t=2432476
Thanks to @hyelton
Just follow the instructions and it will take you back to the ZVE firmware. Once you've reverted back to ZVE, let your phone update. It will take you through 2 firmware updates, ZVG and then ZVH.
NOTE 1: I downloaded the DLL file found in the Sprint folder. I had to use it instead of the Megalock DLL. Megalock gave me an error. The DLL in the Sprint folder worked perfectly so make sure you use it in place of Megalock when following the instructions.
NOTE 2: Once your phone is in Download Mode and you plug it into your pc there is a VERY good chance that it will start updating the drivers. LET IT!! It may take awhile so just be patient. Once it has completed, you can begin the process of flashing the older firmware.
NOTE 3: The tutorial states "99% of the time FlashTool will FAIL after 85% anything after 85% is just your phone rebooting so your safe". Personally, mine completed without getting stuck.
NOTE4: If you have trouble with Data, do a PRL update and a PROFILE update.
_________________________________________________________
OK....... once you've taken all the OTA updates and you are on the ZVH firmware you can begin the rooting process.
I have uploaded a zip with a tutorial on rooting the LS980. Make sure you unzip the entire zip file and open the README 1st!
I looked at several methods before rooting my device and cannot remember the original author of the tutorial included in the rooting process and files. I take no credit for this tutorial. If I could remember the author I would most definitely give him the credit deserved.
LG Root-
http://www.mediafire.com/download/or13cg94acgsx1a/LG_Root.zip
LS980 AutoRec apk-
This will flash TWRP on your device. It will also make a backup of your stock recovery. Just extract, place the apk on your device and install. .
http://www.mediafire.com/download/cb029lt87l7za6a/LS980AutoRec+apk.zip
One last thing......... I also have the HotSpotMod working on my LS980. The ZVG zip in the thread will work for ZVH also. I had trouble with the mod alone so I tried using the WiFi Tether Router app found on Google Play after flashing the mod. I was able to get the hotspot working with the app. If you decide to flash the HotSpotMod, try it 1st. It may work for you. If not, use the app mentioned above and it'll work.
HotSpotMod-
http://forum.xda-developers.com/showthread.php?t=2584775
Thanks to @Ascertion
EDIT: ADDED THE LS980 AUTOREC apk. You'll need it to flash TWRP.
One more thing. As far as I know, none of the custom ROMs have the ZVH patch for stagefright. If you flash one of those builds, as I understand it, you will lose the stagefright patch. Just wanted to make sure that info is known.
EDIT 2:
Please read this before proceeding. Some members have experienced an issue with the send command. Spawn found a fix that has worked for several users. Please be sure to click the THANKS tab on this post. :thumbup:
http://forum.xda-developers.com/showthread.php?p=64190389
END
wetbiker7 said:
OK........ This is for the Sprint/Boost LS980. This info will allow you to root the ZVH firmware update. I have used this method on both Windows 7 and ...
Click to expand...
Click to collapse
@wetbiker7, This is the same method I've used several time to get root on zvh. It hasn't worked yet.
For some reason when I run the last "sh" command, the cmd window gives me no feedback and just sits there.
I've left it running for 30 mins before pulling my phone and restarting it.
I'm using the correct "diag" port so I don't understand what the problem is.
Any ideas as to what's going on?
Thanks!
chuddler said:
@wetbiker7, This is the same method I've used several time to get root on zvh. It hasn't worked yet.
For some reason when I run the last "sh" command, the cmd window gives me no feedback and just sits there.
I've left it running for 30 mins before pulling my phone and restarting it.
I'm using the correct "diag" port so I don't understand what the problem is.
Any ideas as to what's going on?
Thanks!
Click to expand...
Click to collapse
Are you running Windows 8 by chance? A buddy of mine couldn't get it to work on 8. Even if your not running Windows 8, try it on another computer.
Edit : I'll run through the process tomorrow and see if I can get it figured out for you.
chuddler said:
@wetbiker7, This is the same method I've used several time to get root on zvh. It hasn't worked yet.
For some reason when I run the last "sh" command, the cmd window gives me no feedback and just sits there.
I've left it running for 30 mins before pulling my phone and restarting it.
I'm using the correct "diag" port so I don't understand what the problem is.
Any ideas as to what's going on?
Thanks!
Click to expand...
Click to collapse
Did you enable USB debugging in the developer section on your phone settings?
Did your pc update drivers when you had put the phone in download mode and connect it to the pc? It should have.
Are you running Windows 8 by chance? A buddy of mine couldn't root his on 8. I've tried it on both 7 and 10.
Also, I had to unplug my phone and plug it into the pc again to get the pc to recognize it.
About ZVI update
Here http://opensource.lge.com/osSch/list?types=ALL&search=ls980 i've finded ZVI zip. But I've think this is the only source code?! Does anybody receive ZVI OTA update?
its odd everything seems to work until I reach the Send_Command.exe \\.\COM4 part
my COM is COM41 so I did COM41 instead idk if that breaks the process but basically when I run the SH command it just hangs Download Mode seems to be where most of my recent Rooting Attempts fail any ideas what would cause it to hang on running the lg_root.sh?
(update) oddly had to type ENTER rerun the send command then rerun the script now im rooted it looks like IDK why but thats an odd turn of events maybe this will help someone else ^_^
I'm already running ZVH and just got another firmware update notification today. Has to be another security update since it's only 231mbs. What sux is I'll have to TOT back again if I decide to take it.
Anyone else get the update yet?
wetbiker7 said:
I'm already running ZVH and just got another firmware update notification today. Has to be another security update since it's only 231mbs. What sux is I'll have to TOT back again if I decide to take it.
Anyone else get the update yet?
Click to expand...
Click to collapse
Yeah it showed up on my phone today. Not looking forward to TOTing either.
Sent from my LG-LS980 using Tapatalk
Changelog ?
Sent from my LG G2 LS980
Got ZVI 2 days ago
wyelkins said:
Got ZVI 2 days ago
Click to expand...
Click to collapse
I'm going to stick with ZVH. It's got the stagefright fix plus it can be rooted and has the hotspot mod. ZVI can't be rooted yet plus the changes made by the ZVI update, according to the info I've read, aren't worth losing root over.
Also, I may play around with CyanogenMod a little more. 12.1 runs great and progress is being made on 13.
My G4 was running 11A (rooted) and I wanted to upgrade to 13B
So follow this steps and you will be able to upgrade.
First make sure your phone is recognized by your PC.
Step 1. Download the 13B KDZ (Full stock image not the rooted) from here http://forum.xda-developers.com/verizon-g4/general/vs986-rooteddebloated-t3256814 (Edit 2 on big red fonts)
Step 2. Download LG Flash Tool from here http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Step 3. Put the phone in download mode.
Step 4. Launch LG Flash tool select the VS98613B_00_ARB02.kdz file you downloaded on step #1.
Step 5. choose CSE Flash, on the pop up window choose start, then click OK and let the phone alone.
You can get some weird popup window that the server is not responding, let that alone. After the progress bar on LG Flash tool finished to 100% the phone will reboot itself and you will be on the Verizon setup screen, if you don't have a verizon sim, then it's going to pop up something saying that it doesn't have a verizon sim or something like that, just ignore and setup the phone using WiFi connection. And thats all. Now you will be on 13B.
DISCLAIMER: this process is done under your responsibility.
Ok in case another newbie wants to do the upgrade, those are the steps. I did it using CSE Flash.
CyberManiaK said:
Ok in case another newbie wants to do the upgrade, those are the steps. I did it using CSE Flash.
Click to expand...
Click to collapse
Did you have to go back to stock? My phone is currently rooted on 11a. Do I need to be unrooted?
strain15 said:
Did you have to go back to stock? My phone is currently rooted on 11a. Do I need to be unrooted?
Click to expand...
Click to collapse
Well mine was rooted also on 11a, so I just flashed the stock 13b and voila, everything was fresh.
So, no you don't need to unroot, you can flash the 13b over your current rooted 11a
Enviado desde mi VS986 mediante Tapatalk
CyberManiaK said:
Well mine was rooted also on 11a, so I just flashed the stock 13b and voila, everything was fresh.
So, no you don't need to unroot, you can flash the 13b over your current rooted 11a
Enviado desde mi VS986 mediante Tapatalk
Click to expand...
Click to collapse
How did you root after you flashed stock 13b?
strain15 said:
How did you root after you flashed stock 13b?
Click to expand...
Click to collapse
To root you need to read the whole post from here http://forum.xda-developers.com/verizon-g4/general/vs986-rooteddebloated-t3256814 there you will find the rooted IMG file that you need.
I'll definitely take this thread's instructions as a shortcut to get the LG G4 up to firmware 13B and then root it. I rather start fresh with 13B rather than carry anything that may have gone wrong with firmware 10B when it was rooted. I also don't care about the vaporware 10B ROM hack.
ok, so it may be a dumb question, so forgive me in advance, I am currently on stock 13b, it is possible to flash the rooted kdz file to obtain root on 13b?
it sounds like it would be too easy and therefore....it might be
also would like to add that i have been following several threads since getting this phone, I appreciate all the hard work and knowledge you guys provide. :good:
kingkoopa85 said:
ok, so it may be a dumb question, so forgive me in advance, I am currently on stock 13b, it is possible to flash the rooted kdz file to obtain root on 13b?
it sounds like it would be too easy and therefore....it might be
also would like to add that i have been following several threads since getting this phone, I appreciate all the hard work and knowledge you guys provide. :good:
Click to expand...
Click to collapse
You need to flash the rooted IMG file not the KDZ on this thread http://forum.xda-developers.com/verizon-g4/general/vs986-rooteddebloated-t3256814 you can find the file needed and also the instructions. Read the whole post so you have everything clear before doing the process.
Sent from iPad Air 2
thank you!
I saw that the sprint version has gotten marshmallow already, I am still debating weather I want to root now, or wait on verizon, which may take well into next year.
Step 3. Put the phone in download mode.
how do i do that?
chicu1981 said:
Step 3. Put the phone in download mode.
how do i do that?
Click to expand...
Click to collapse
First make sure you have installed the drivers for your phone.
Then plug your usb cable to the PC (do not connect to the phone).
Turn off your phone.
Now while holding volume up plug the usb cable to the phone and you will get download mode.
Thx for the guide!!
Im just wondering though, what OS are you running?
I'm on Win 8.1 and am having trouble getting the LG flash tool to start the CSE flash. Ive used this tool before to flash back to stock and dont remember having any issues. But now I have to run the app as administrator and wait like 60 secs to get it to even start. I also noticed this in the LG Flash tool thread
WARNING: Windows 8 and 8.1 Are having Permission issues, I don`t use Windows 8 so Googleling would help for running the script that needs permission.
Click to expand...
Click to collapse
Just wondering if maybe its my comp as it has been a lil screwy lately
EDIT: Nevermind, just had to wait another 60+ secs for the last screen to pop up. Im good now!
JJT211 said:
Thx for the guide!!
Im just wondering though, what OS are you running?
I'm on Win 8.1 and am having trouble getting the LG flash tool to start the CSE flash. Ive used this tool before to flash back to stock and dont remember having any issues. But now I have to run the app as administrator and wait like 60 secs to get it to even start. I also noticed this in the LG Flash tool thread
Just wondering if maybe its my comp as it has been a lil screwy lately
Click to expand...
Click to collapse
I did it using Win 10, and I start LG flash tool with admin rights.
Not sure if you saw my edit above, but I got everything working.
Anyways,I thought the img we were flashing was already rooted. So I guess its a bit more involved. So let's see if I got this straight.
After following instructions from this thread, all I have is a rootable (but not yet rooted) 13b img.
So the next step is to root it using the low effort root method with the below file
https://www.androidfilehost.com/?fid=24269982087013417
But, if for whatever reason, I need to unroot, I need to make a backup of my current system image using this thread below.
http://forum.xda-developers.com/ver...ddebloated-t3256814/post64049726#post64049726
Is that correct?
JJT211 said:
Not sure if you saw my edit above, but I got everything working.
Anyways,I thought the img we were flashing was already rooted. So I guess its a bit more involved. So let's see if I got this straight.
After following instructions from this thread, all I have is a rootable (but not yet rooted) 13b img.
So the next step is to root it using the low effort root method with the below file
https://www.androidfilehost.com/?fid=24269982087013417
But, if for whatever reason, I need to unroot, I need to make a backup of my current system image using this thread below.
http://forum.xda-developers.com/ver...ddebloated-t3256814/post64049726#post64049726
Is that correct?
Click to expand...
Click to collapse
Yeah, you are right. :good:
I have another question if ya dont mind.
In the low effort root thread, there's an 11a img posted, not 13b img like Im currently on. What img file should I be using on 13b for root?
JJT211 said:
I have another question if ya dont mind.
In the low effort root thread, there's an 11a img posted, not 13b img like Im currently on. What img file should I be using on 13b for root?
Click to expand...
Click to collapse
sorry for the delay.. for root i just went thru this img http://forum.xda-developers.com/verizon-g4/general/vs986-rooteddebloated-t3256814
it's already rooted and debloated.
CyberManiaK said:
My G4 was running 11A (rooted) and I wanted to upgrade to 13B
So follow this steps and you will be able to upgrade.
First make sure your phone is recognized by your PC.
Step 1. Download the 13B KDZ (Full stock image not the rooted) from here http://forum.xda-developers.com/verizon-g4/general/vs986-rooteddebloated-t3256814 (Edit 2 on big red fonts)
Step 2. Download LG Flash Tool from here http://forum.xda-developers.com/g4/general/guide-lg-g4-stock-firmware-to-stock-kdz-t3107848
Step 3. Put the phone in download mode.
Step 4. Launch LG Flash tool select the VS98613B_00_ARB02.kdz file you downloaded on step #1.
Step 5. choose CSE Flash, on the pop up window choose start, then click OK and let the phone alone.
You can get some weird popup window that the server is not responding, let that alone. After the progress bar on LG Flash tool finished to 100% the phone will reboot itself and you will be on the Verizon setup screen, if you don't have a verizon sim, then it's going to pop up something saying that it doesn't have a verizon sim or something like that, just ignore and setup the phone using WiFi connection. And thats all. Now you will be on 13B.
DISCLAIMER: this process is done under your responsibility.
Click to expand...
Click to collapse
I can't seem to find the answer to this anywhere --
Is this the technical equivalent of taking the OTA for 13B?
In other words, am I also getting the updated baseband/radio/bootloader by using this KDZ (or whatever the LG equivalents of those things are)?
Or does this just put /system components of 13B on there?
pkopalek said:
I can't seem to find the answer to this anywhere --
Is this the technical equivalent of taking the OTA for 13B?
In other words, am I also getting the updated baseband/radio/bootloader by using this KDZ (or whatever the LG equivalents of those things are)?
Or does this just put /system components of 13B on there?
Click to expand...
Click to collapse
Hi, yeah this is the official verizon kdz it contains everthing you will get on the OTA.
Enviado desde mi Sero 7 Pro mediante Tapatalk
Just wanted everybody to know that you CAN downgrade your MM LG G4 for Verizon by using LGUP.
And this is how...
1). Download all The Files Below!
1) Firmware Files - Click HERE!
Or Here LGKDZ.com for your exact match KDZ for your model
2) Download LG Drivers - LG Drivers Here - 10.9 Mb
2.1)Verizon Drivers (Verizon Only)LG_VZW - 7.8 Mb
3..LGUP can be found on this website LG UP DOWNOAD
You have to sign into one of your accounts and like the page for them to open the downloads in the middle of the page.
4. install the drivers then the .msi file for LGUP. Usually there is a DLL file and the LGUP application, install the .DLL file then install LGUP.
5. First make sure that your phone is showing up on LGUP, if not make sure you have USB debugging enabled and the you are connected with MTP.
6. Find your .kdz file, and don't press start VERY IMPORTANT!!, Exit out of the application and then REOPEN LGUP and your 13b.KDZ should still be in the box at the bottom.
7. Now just press start and wait for it to do it's magic.
And now your back on LL and you can get back to rooting this phone.
And just so people know it is not possible to downgrade from LL to KK, it will brick your phone for some reason, and trust me I had to send mine back and get a knew one, nothing would get it to work again!
So that's how you get back to LL from MM, which seems to be the only way to have root at the moment...
One more thing, I was able to transfer the files for the effortless root on MM but you can't do any send_command.exe commands because it just says FAIL. but it did switch the system software from Official to Modified so it did something just not what I wanted it to do....
If there's anyone wondering why this works, it's because both the 13b and 24c kdz's both have the same qfuse number, so the bootloader accepts both without bricking. If Verizon ever puts out an update that increments the qfuse value and you take it, you won't be able to downgrade to 13b or 24c.
I have the kdz file but it wont let me put it on lgup. It's looking for a .tot file. Help would be greatly appreciated
Nevermind. Figured it out
would this work with h811
mrewn said:
would this work with h811
Click to expand...
Click to collapse
This is the Verizon VS986 LG G4 section .
shoes22 said:
If there's anyone wondering why this works, it's because both the 13b and 24c kdz's both have the same qfuse number, so the bootloader accepts both without bricking. If Verizon ever puts out an update that increments the qfuse value and you take it, you won't be able to downgrade to 13b or 24c.
Click to expand...
Click to collapse
Thank you for the info! Just curious: how do you check the value of qfuse?
I did this on a Canadian variant H812 and it worked. Rooted right after and that worked too. I am a happy camper.
I loaded H81210n.
Anyone reading do note that I did not use the Verizon files above.
---------- Post added at 06:39 PM ---------- Previous post was at 06:34 PM ----------
duvelsuper said:
I have the kdz file but it wont let me put it on lgup. It's looking for a .tot file. Help would be greatly appreciated
Nevermind. Figured it out
Click to expand...
Click to collapse
What you must do is tick the update and select the kdz file. Then close LGUP, open it again and select refurbish and kdz file should be there. Start the load.
This phone with L and root is perfect. No M for me until root (if it happens). Really enjoy having the changed DPI with root and no permanent notification for Priority mode.
You can DL from here, without "liking" anything. http://www.droidopinions.com/download-lgup-tool/
Colchiro said:
You can DL from here, without "liking" anything. http://www.droidopinions.com/download-lgup-tool/
Click to expand...
Click to collapse
Or get it from this XDA thread: http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803 where those other sites probably got it from .
divineBliss said:
Or get it from this XDA thread: http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803 where those other sites probably got it from .
Click to expand...
Click to collapse
*edit* sorry did not mean to quote the person above me. I'm asking about actually getting from MM back to LP
Hate to ask this but has anyone verified this? I'm wanting to do this to mine tonight but I don't have near the experience a lot of others do here.
I did this without any problems at all
phonepie said:
*edit* sorry did not mean to quote the person above me. I'm asking about actually getting from MM back to LP
Hate to ask this but has anyone verified this? I'm wanting to do this to mine tonight but I don't have near the experience a lot of others do here.
Click to expand...
Click to collapse
I did this without any problems at all
It's very easy. Just load stock kdz with LGUP. I even rooted and all that after.
Sent from my LG-H812 using Tapatalk
tulio25 said:
I did this without any problems at all
Click to expand...
Click to collapse
thanks!
---------- Post added at 12:21 AM ---------- Previous post was at 12:20 AM ----------
milan187 said:
It's very easy. Just load stock kdz with LGUP. I even rooted and all that after.
Sent from my LG-H812 using Tapatalk
Click to expand...
Click to collapse
thanks!
silly question but will i lose all data on my phone if I do this?
stephen293 said:
silly question but will i lose all data on my phone if I do this?
Click to expand...
Click to collapse
I haven't done it just yet. And I know I'm not the smartest here. But to my knowledge yes you will lose everything. So always good to back up all your files. I've got all my photos backed up to google photos. over 5000 lol. But yeah from what I understand it's the same as doing a factory reset except instead of factory resetting back to MM you're factory resetting to LP.
stephen293 said:
silly question but will i lose all data on my phone if I do this?
Click to expand...
Click to collapse
(Request to a moderator below my response to stephen293)
OK, I did mine last night and using the refurbish mode as said does in fact delete all data.
((TO MODERATOR CAN WE GET THE ORIGINAL POST UPDATED TO INCLUDE THAT TO LOCATE THE KDZ FILE YOU NEED TO FIRST TICK THE UPGRADE CIRCLE)) I found it down the thread, But just figured it would be easier for others if it was included in the original post. Thanks
Big ups to everyone who made this happen!
Link not working kdz site down
Azweezey said:
Just wanted everybody to know that you CAN downgrade your MM LG G4 for Verizon by using LGUP.
And this is how...
1). Download all The Files Below!
1) Firmware Files - Click HERE!
Or Here LGKDZ.com for your exact match KDZ for your model
2) Download LG Drivers - LG Drivers Here - 10.9 Mb
2.1)Verizon Drivers (Verizon Only)LG_VZW - 7.8 Mb
3..LGUP can be found on this website LG UP DOWNOAD
You have to sign into one of your accounts and like the page for them to open the downloads in the middle of the page.
4. install the drivers then the .msi file for LGUP. Usually there is a DLL file and the LGUP application, install the .DLL file then install LGUP.
5. First make sure that your phone is showing up on LGUP, if not make sure you have USB debugging enabled and the you are connected with MTP.
6. Find your .kdz file, and don't press start VERY IMPORTANT!!, Exit out of the application and then REOPEN LGUP and your 13b.KDZ should still be in the box at the bottom.
7. Now just press start and wait for it to do it's magic.
And now your back on LL and you can get back to rooting this phone.
And just so people know it is not possible to downgrade from LL to KK, it will brick your phone for some reason, and trust me I had to send mine back and get a knew one, nothing would get it to work again!
So that's how you get back to LL from MM, which seems to be the only way to have root at the moment...
One more thing, I was able to transfer the files for the effortless root on MM but you can't do any send_command.exe commands because it just says FAIL. but it did switch the system software from Official to Modified so it did something just not what I wanted it to do....
Click to expand...
Click to collapse
Hey sorry but the www.lgkdz.com doesn't work. Is there another site we can find all lg firmware to downgrade for our exact lg variant match....
From OP second 1), try : http://storagecow.eu/index.php?dir=Xda/LG+G4/
or check the XDA G4 section for your variant.
Thank you for your response. I did actually download the H812 kdz from storagecow however when I put it in the LGUP tool it read as an error in the tot file. I'm not sure what happened or where I went wrong. I'm so confused at this point and without my G4 being unuseable at this time. I also wanted to ask if the kdz you directed me to are in fact the file I need to go back to LP from MM?