Broken Accelerometer and gyroscope - Galaxy S 4 Mini Q&A, Help & Troubleshooting

I noticed that for some unknown reason my accelerometer and gyroscope just stopped working. I have managed to fix it and thought I would just give my story in case anyone else has this problem.
I did drop my phone but not badly and it landed on a relatively soft floor.
I tried factory resetting battery, pull, and full wipe and reinstall of custom roms. NONE of these options worked.
The only thing that managed to reset it was doing an update through Odin with an official samsung rom 4.4 that I downloaded from samsung
http://www.sammobile.com/firmwares/1/
This was the only way to reset the accelerometer and gyroscope sensors, it also updated the baseband version to a kitkat 4.4 compatible one so I suspect if I do go back to the custom roms again (I was on Carbon Rom) this baseband update will stay with the device.
Anyway it is all working now and I am very happy the updated samsung rom in much much better and more debugged than the stock rom that it had when I got it so I think I am going to try it out for a while and see how it goes I will undoubtedly go back to custom roms but in terms of recovery it is nice to know that a flash of the official rom will truely and fully reset and calibrate the sensors like the gyroscope and accelerometer.
cheers
:cyclops:

Related

[Q] Sensors not working after update

Hi
This is my first post here. I have come across a problem and need some help. We bought 4 galaxy grand i9082s in Pakistan and I flashed Indian XXUBMI1 4.2.2 firmwares on all of them using odin 3.07 (since 4.2.2 updates for Pakistani firmware were not available so I chose the neighbor's ). The updated firmware works fine on all of the devices except one whose motion sensors (accelerometer, gyro and orientation) are no longer working. The Samsung test feature (*#0*#) showed that accelerometer and gyro were not picking any data at all (x=0, y=0, z=0, and it remains zero). I then reinstalled the old firmware 4.1.1 and the sensors were working fine with it, but again after upgrading to 4.2.2 they stopped working (virtually making the phone not-upgradable to 4.2.2). I tried different countries' firmware on the phone but the result was sensors are working in 4.1.1 but not 4.2.2. Please guide me how to solve this problem and make the phone at par with the others.
P.S. Only one device has encountered this problem
I have tried the following for a solution:
1. Factory reset and data wipe
2. Downgrade to 4.1.1 (sensors working fine) and re-flash 4.2.2 (sensors no longer working)
3. Downgrade to 4.1.1 (russian version, sensors working fine) and get the OTA 4.2.2 update (sensors no longer working)
4. Installed philz_touch_5.15.0-i9082 recovery, rooted the phone with Update-SuperSU-v1.25 (however I don't know of any software that could reset the sensors)
5. Tried installing different kernels
6. Calibrate with Sensor Tester (works only in 4.1.1 but doesn't do anything on 4.2.2)
My guess is the problem is with the bootloader (or where ever the drivers are), maybe I made some mistake during the first upgrade and it set some flag to dirty or something, now its not resetting (because the update is working fine on rest of the 3 devices, if there was any hardware compatibility issue it wouldn't be working on them too)
Now I even tried NAND reset all on odin but no luck :crying:. Same problem persists (works in 4.1.1 but not in 4.2.2) and I am scared to use any other options in odin. I also just tried rooting the phone and checking options in wanam xposed software but nothing could be found. Also tried cleaning delvik cache and formatting everything from recovery such that the phone only showed galaxy grand sign and not move any further, then I flashed the firmware (latest vietnamese one XXUBMJ4), but same problem :crying:.
I don't think this is because of some wrong settings (because the test mode should pick something no matter what the settings, right). And since it works in 4.1.1 means hardware is also fine. Then what the heck is wrong with this particular phone. I noticed that on other phones (the ones on which everything is fine with 4.2.2), I noticed that RF cal and HW Rev show unknows while on this one they show 20121109 and REV0.4 respectively. Does that make a difference???
Please help, I haven't been able to sleep since 2 nights now because of this

[Q] One problem or another

I am trying to find a fully functional rom. I have tried numerous roms and run into 2 or 3 of the same problems. What I need is working ? . Working Wifi. Working Camera. And working GPS. Most of the roms have given me a problem with the camera. For instance, I take a picture in a dark place and when the flash goes off I get a black screen and there is no display I am forced to pull battery as the phone will not reboot after. I have not had wifi or bluetooth problems in a long time so I can not comment on that. I recently tried Liquid Smooth's 4.4 rom and the camera works, however GPS will not work unless connected to WIFI which does me no good if it won't navigate. Has anyone found a rom out there that is fully functional? I do not have service on my device, which is d2spr by the way, so mobile data and 4g are not needed. Any advice on this would be greatly appreciated.
If you want fully functional with no additional stuff except what you want, just use stock odex, latest firmware is NJ2, If stock untouched is giving you problems then you may have a messed up internal memory or something.
Wicked S5
Phone is Completely Screwed
So i flashed a MK5 Modem on my L710t due to the fact that my wifi and data were not working ... I though it would fix this ... before that on some roms, the wifi would work, but the data didn't ... and vice versa with other roms ... Carbon and LiquidSmooth to be specific. I can't seem to fix it .. so i tried Unrooting back to all stock everything ... and no matter what tar file i use i get a FAIL in Odin ... i tried three tar files and even tried the 1-click.exe. got an EPIC FAIL ... i tried flashing a stock MK5 deodexed rom because i had flashed a MK5 modem and the damned rom wouldn't boot ... I really just want to revert to a stock Virgin Mobile Samsung Galaxy S III with 4.4.2 and an N8 Modem or whatever modem it came out of the box with ... CAN SOMEBODY PLEASE HELP ME ...
please and thanks
Thanks. It was a pain in the butt to get it installed as I had to update to ND8 but I think this is is quite functional and what I was hoping for will see in a few days how the system reacts but so far the camera works and i am bout to test gps. So thank you for recommending the Wicked S5.

Sensors Broken after ROM Change

So, i'm completely lost. I was playing around with ROMs and mods (the RAM build.prop, for example), and now all my phone's sensors seem to be stuck.
I have reflashed back to completely stock ROM, taken official sprint update. Tried modded ROM, done factory resets, cleared/wiped everything, and still the issue persists.
It would appear my Gyroscope, Accelerometer, Proximity Sensor, and Compass are all not responding at all.
Right now i'm on rooted stock AOJ6.
Does anyone have any ideas? Maybe a corrupted sensor properties file or something similar like that? I'm completely at a loss.
Any help is appreciated.
Guys, it fixed itself. I booted into safe mode, restarted and all the sensors are working again.
I doubt it had anything to do with safe mode, as the sensors weren't working in safe mode.
I have no idea what could have done it. I wish I had a real answer for you.

Gyroscope and other sensors not working after recent updates. HELP!

Thank you for clicking on the thread.
I've loved my Zenfone 2 for a while now. I have the 64gb 1080p model. It was a well priced powerful phone for what I wanted.
However, I recently received an asus software update that completely borked the Gyroscope and some other sensors. I have read about similar issues online and testing the sensors reveals that they're not working.
Does anyone know how I can fix this? I have been unsuccessful in trying to install CyanogenMod13 or even TWRP/CWM. I rooted my phone and the bootloader is unlocked (white backscreen upon loading).
It seems as though ASUS doesn't want to fix this, would upgrading to a custom ROM provide firmware that would properly recognize and use the gyroscope as input?
I've tried wiping the system cache in the stock recovery, resetting to factory new and everything to no avail.
I am willing to "tip" or "pay" for someone's time if they can help me as I cannot auto-rotate or use any applications requiring certain sensors.
Thanks for your time.
I've upgraded to CM13 successfully now and the gyroscope is still not even recognized in Sensor applications. Is it hardware?
solution?

Upgrade broke the GPS

Hi all, I have a note 2 shg-i317 that was originally on Bell in Canada. It was unlocked and the aws mod done to it, I use freedom mobile, aka T-mobile in the states.
I was running a Rom for the past 3 years Slimfast 4.4 and liked it. I had tried Nugat on another phone, thought I would try the [ROM][7.1.2][OFFICIAL] LineageOS for N7105
I did the upgrade, broke the root, could not get a few things working, so I decided to restore the Slimfast backup I had just made (complete including modem etc) and everything works except the GPS.
GPS for me is huge, I use it a lot. I cannot lock on to 1 satellite now. Before i was able to lock onto a minimum of 16 in about 30-45 seconds, if outside.
I really dont care if I can get to 7.1 at the moment. I need my GPS back - any troublshooting for getting GPS to work on this phone?
James
I would try to flash the original stock for your phone and country from sammobile. com
Gps should work normaly then. If not your hardware is broken. If it works you can always flash your data back from your Slimfast rom.
Verstuurd vanaf mijn SM-N910C met Tapatalk
Crap, I am posting here, because I did it again. Again not sure how. I tried to run Reserection, and I guess that messed up the GPS.
To put the original stock rom on.. I have to do that through ODIN? I dont remember how I fixed this last year.. Sorry.
Hope somone can help I need the GPS.
James
ps. Used odin 3.09 to flash the original rom... still no GPS
You flashed the latest 4.4.2 room?
audit13 said:
You flashed the latest 4.4.2 room?
Click to expand...
Click to collapse
The Rom that I flashed to try and restore the GPS was I317MVLUDNF1_I317MOYADNF1_BMC (mine was an originally BELL phone)
But that did not repair the GPS from me flashing resurection.. I THINK did it. I flashed an android 6 and an android 7 rom. (Mokee) but tried to go back to my Slimfast.. and the GPS was now broken.
Basically what I did a year ago.. somehow I fixed it then.. but cannot remember at all how I did it.
James
The note 2 sold by Rogers, Bell, and Telus are exactly the same model and stock roms from these carriers can be cross flashed.
Try flashing the stock ROM twice in Odin with a factory reset in between each flash.
audit13 said:
The note 2 sold by Rogers, Bell, and Telus are exactly the same model and stock roms from these carriers can be cross flashed.
Try flashing the stock ROM twice in Odin with a factory reset in between each flash.
Click to expand...
Click to collapse
Do you mean boot up the rom.. run the reset in the rom? or flash.. - load TWRP back in.. WIPE.. then FLASH again with odin?
Thanks for helping btw.
James
I have backups (complete all partitions) of my rom.. Slimfast 4.4 from 2-3 days ago.. when I tried this. SO.. if I can get the Factory rom to restore the GPS.. how can I restore the backup.. I saw somewhere that the EFS partition could be left out and that might help? dont restore the modem? how??
James
I meant flash with Odin, boot into stock recovery, factory reset, flash again with Odin, boot into stock recovery, factory reset, and boot into the stock ROM.
Nope, still no GPS lock.. I have the flashing circle (always had) and it will not lock.. I read about where people go into a service mode and rebuild the NV? .. I assume this is something that Mokee or Reserection did.. not sure how.
Any other ideas?
James
what about using Odin or TWRP to put different modems in? does the modem effect the GPS?
tried this.. does not seem to. grrrrr wish I knew how I fixed this.
James
I assume there are no loose wires. Does it get a lock when using wifi? Not sure what else to suggest.
Not sure about rebuilding NV.
No.. I broke it with playing with custom roms.. Liniage was last year.. I did not try that this year.. but tried both android 6 reserection and android 7 Mokee.. and I am pretty sure they messed it up.. I am also pretty sure there was something I did .. easy like load an old STOCK rom and it fixed it.. I was then able to put my slimfast 4.4 back over it and it was fine. Unfortunatly .. not enough people still using this device.. I will have to have patience I guess.
James
So I have tried differenct stock roms, but I think the issue is ODIN will not restore code from a rom image that is HARDWARE based. I wanted to use Samsung smartswitch but they disabled the part of it that allowed you to factory reset the phone, this seemed to work for several people. Many have also reported entering a code and going into a service mode.. there you can do to a menu that will rebuild hardware modules back to default. But I have not been able to get into that mode because it seems to be a touchwiz only option, and I cannot find a factory rom that is touchwiz based for this model.
What needs to be done is a true FACTORY ROM image.. that would revert all software and hardware back to original, but I cannot seem to find that anywhere.
James
The only factory roms that I know of come from places like sammobile.com and they are all based on TouchWiz which is Samsung's launcher.
So guess what? put Ressurection back on.. and the GPS is back.
I cannot get it to work in any KitKat based rom.. but now anything Marshmellow up.. works.. HMMMMMM
James

Categories

Resources