Hi all,
I want to share flashable zip Stock D80220H made from
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW599016432109876543213/D80220H_00.kdz
This is original firmware with root doesn't remove anything . You can download and flash via custom recovery like other custom ROM.
For people who don't want to flash KDZ firmware
Donations:
If you like my work you can offer me
1. Downlaod Link : LGG2-D80220H_droidth.zip
http://bit.ly/1vaKGmB
Reccommend Cloudy kernel ,Downlaod and flash it after flash ROM.
https://www.androidfilehost.com/?w=files&flid=14807
2. And this is script DeBloater
Download Link : LGG2-D802STOCK_DeBloater_droidth_R02.zip (new)
http://bit.ly/1vjDNic
Download Link : LGG2-D802STOCK_DeBloater_droidth_R01.zip
http://bit.ly/1tdis7U
3. cust and modem stock 20H for other countries (except Thailand)
Stock_MODEM_CUST_20H_droidth.zip
Download Link :http://bit.ly/1uceyvl
4. MOD Small Navigationbar
Download link :
http://bit.ly/1sTNRZq
5. Return to Stock Navigaionbar
Download link:
http://bit.ly/1sTObY9
You can choose other level of navigationbar in my thread
[MOD] Small NavigationBar For Stock D80220H - 11 Level
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloading, thank you
Whats new in 20H?
Dragonhide said:
Whats new in 20H?
Click to expand...
Click to collapse
I didn't see change log yet.
somboons said:
I didn't see change log yet.
Click to expand...
Click to collapse
Can I flash this dirty over 20G
Dragonhide said:
Can I flash this dirty over 20G
Click to expand...
Click to collapse
I think , You can.But I recommend to wipe.
This is stock ROM and if you wipe cache and dalvik it's enough. There isn' much changes between G and H.
Wysłane z mojego LG-D802 przy użyciu Tapatalka
Hi!
What is this?
3. this is original cust and modem partition of 20h firmware in flashable zip I package cust/modem for Thiland people if you want to change to original you can download here and flash via custom recovery
Stock_MODEM_CUST_20H_droidth.zip
Download Link :http://bit.ly/1uceyvl
Click to expand...
Click to collapse
Which is the difference between with this?
1. Downlaod Link : LGG2-D80220H_droidth.zip
http://bit.ly/1vaKGmB
Click to expand...
Click to collapse
kratos69 said:
Hi!
What is this?
Which is the difference between with this?
Click to expand...
Click to collapse
It's is modem and cust partition that extract from stock kdz firmware 20H.In flashable zip in (1.) I pack modem and cust from stock kdz from Thailand.
somboons said:
It's is modem and cust partition that extract from stock kdz firmware 20H.In flashable zip in (1.) I pack modem and cust from stock kdz from Thailand.
Click to expand...
Click to collapse
Ok but in (1) is included (3)?
I dont understand this: " I pack modem and cust from stock kdz from Thailand"
Can you explain a little better?
kratos69 said:
Ok but in (1) is included (3)?
I dont understand this: " I pack modem and cust from stock kdz from Thailand"
Can you explain a little better?
Click to expand...
Click to collapse
This ROM . I made for country in ESA zone .I package baseband and custom partition in flashable zip ,But another zone sush as SEA can use it too.if you want to use original baseband from orginnal kdz file you can downlaod (3) flash via custom recovery. Or downlaod kdz firmware flash via LG Flashtool.
somboons said:
This ROM . I made for country in ESA zone .I package baseband and custom partition in flashable zip ,But another zone sush as SEA can use it too.if you want to use original baseband from orginnal kdz file you can downlaod (3) flash via custom recovery. Or downlaod kdz firmware flash via LG Flashtool.
Click to expand...
Click to collapse
Ok thanks! I am from Spain, so i have to flash (3), really? Thanks!!
kratos69 said:
Ok thanks! I am from Spain, so i have to flash (3), really? Thanks!!
Click to expand...
Click to collapse
Yes.
Downloading and ready to flash over G version
---------- Post added at 07:35 PM ---------- Previous post was at 07:21 PM ----------
No change log yet?
I can confirm that if you are coming from somboon's previous flashable zip Stock D80220G, then wiping dalvik & cache is sufficient... no need for full wipe.
can i flash this on Indian D802 unlocked. ?
will the iorrot25 and auto rec will work with this ?
mor_1228 said:
can i flash this on Indian D802 unlocked. ?
will the iorrot25 and auto rec will work with this ?
Click to expand...
Click to collapse
I made flashable zip flash via custom recovery.
hows the battery any difference ? more on screen time ?
so i just have to flash file not 3rd file right ?
mor_1228 said:
hows the battery any difference ? more on screen time ?
so i just have to flash file not 3rd file right ?
Click to expand...
Click to collapse
yes.
you can see screen on timw at this thread
http://forum.xda-developers.com/showpost.php?p=56781389&postcount=6
after reading ur post properly i came to know that u added specially for Thailand i live in India so now i have to flash rom 1st then this package : am i right ?
3. this is original cust and modem partition of 20h firmware in flashable zip I package cust/modem for Thiland people if you want to change to original you can download here and flash via custom recovery
Stock_MODEM_CUST_20H_droidth.zip
Download Link :http://bit.ly/1uceyvl
Related
Baseband Update Tutorial
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Tool
Stock ICS Baseband
A PC
Patience
Now can't force more......
Click to expand...
Click to collapse
Install drivers
Open Download tool, set your handset into QPST Download mode (Power key+ Voice down key) and connect your phone with USB cable.
Click set path>Browse folder>Select 591379_8376_WCDMA_V000003(By Guneet) where you extracted it
Click Check Port
Take a deep breath and Click Download All
Click to expand...
Click to collapse
Congrats You have successfully updated your baseband
Your splash.img will disappear and blank screen will come don't worry just flash Recovery again(See Downloads
--------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------
Baseband
Download Tool
Updated CWM Recovery
Himalayoee
Prasad
Arjun Rajput
Me
Hereis the Official thread for ICS/JB for Karbonn A5/A7 and Walton Primo
Video Tutorial for Installing Drivers(By Vikas)
succed! thanks a lot!!!!
yes it will work fine!
thanks:laugh::laugh::good::good:
How to donwgrade baseband!
so in this post i am going to explain how to downgrade baseband.Remember that the following steps are only for karbonn a5 and walton primo,spice mi355.
HOW TO DOWNGRADE BASEBAND
rEQUIREMENTS
1.)stock baseband of our phone
DOWNLOAD HERE
2.)Rest every requiremwnts are same as for upgrading.(check post no.1)
pROCEDURE
1.)Unzip the baseband file in any folder.
2.)opent the FASTBOOT1.0.2.4
3.)connect your phone in QPST DOWNLOAD MODE.(power button+volume↓key).
4.)Rest all the steps you know as they are same for downgrading.(check the post no.1)
NOTE:you don't have to download the NPRG7627A.hex file which you did in upgrading.
What after downgrading??
just go HERE and flash this rom via CWN and ENJO(Y):laugh::laugh:
IF still having problems comehere and ask as many questions u wanna ask
ALL THE CREDITS TO arjun rajput and prasad12ka4 senior members of our thread for guiding:victory:
The Droid Master said:
so in this post i am going to explain how to downgrade baseband.Remember that the following steps are only for karbonn a5 and walton primo,spice mi355.
HOW TO DOWNGRADE BASEBAND
rEQUIREMENTS
1.)stock baseband of our phone
DOWNLOAD HERE
2.)Rest every requiremwnts are same as for upgrading.(check post no.1)
pROCEDURE
1.)Unzip the baseband file in any folder.
2.)opent the FASTBOOT1.0.2.4
3.)connect your phone in QPST DOWNLOAD MODE.(power button+volume↓key).
4.)Rest all the steps you know as they are same for downgrading.(check the post no.1)
NOTE:you don't have to download the NPRG7627A.hex file which you did in upgrading.
What after downgrading??
just go HERE and flash this rom via CWN and ENJO(Y):laugh::laugh:
IF still having problems comehere and ask as many questions u wanna ask
ALL THE CREDITS TO arjun rajput and prasad12ka4 senior members of our thread for guiding:victory:
Click to expand...
Click to collapse
thanks very very much:laugh::laugh::victory::victory:
helpppp
The Droid Master said:
so in this post i am going to explain how to downgrade baseband.Remember that the following steps are only for karbonn a5 and walton primo,spice mi355.
HOW TO DOWNGRADE BASEBAND
rEQUIREMENTS
1.)stock baseband of our phone
DOWNLOAD HERE
2.)Rest every requiremwnts are same as for upgrading.(check post no.1)
pROCEDURE
1.)Unzip the baseband file in any folder.
2.)opent the FASTBOOT1.0.2.4
3.)connect your phone in QPST DOWNLOAD MODE.(power button+volume↓key).
4.)Rest all the steps you know as they are same for downgrading.(check the post no.1)
NOTE:you don't have to download the NPRG7627A.hex file which you did in upgrading.
What after downgrading??
just go HERE and flash this rom via CWN and ENJO(Y):laugh::laugh:
IF still having problems comehere and ask as many questions u wanna ask
ALL THE CREDITS TO arjun rajput and prasad12ka4 senior members of our thread for guiding:victory:
Click to expand...
Click to collapse
How to downgrade baseband in a7+??????????? i mean which is the factory baseband???? links plssssssss
ankit99 said:
How to downgrade baseband in a7+??????????? i mean which is the factory baseband???? links plssssssss
Click to expand...
Click to collapse
i dont own that device and u try out with the a7's stock baseband it will work fine.
The Droid Master said:
so in this post i am going to explain how to downgrade baseband.Remember that the following steps are only for karbonn a5 and walton primo,spice mi355.
HOW TO DOWNGRADE BASEBAND
rEQUIREMENTS
1.)stock baseband of our phone
DOWNLOAD HERE
2.)Rest every requiremwnts are same as for upgrading.(check post no.1)
pROCEDURE
1.)Unzip the baseband file in any folder.
2.)opent the FASTBOOT1.0.2.4
3.)connect your phone in QPST DOWNLOAD MODE.(power button+volume↓key).
4.)Rest all the steps you know as they are same for downgrading.(check the post no.1)
NOTE:you don't have to download the NPRG7627A.hex file which you did in upgrading.
What after downgrading??
just go HERE and flash this rom via CWN and ENJO(Y):laugh::laugh:
IF still having problems comehere and ask as many questions u wanna ask
ALL THE CREDITS TO arjun rajput and prasad12ka4 senior members of our thread for guiding:victory:
Click to expand...
Click to collapse
Doesn't help...
I did everything correctly...
and when I click on download....It checks the NRP.....file and says go ok.
Then.....BP Download failed.....
Arushvds said:
Doesn't help...
I did everything correctly...
and when I click on download....It checks the NRP.....file and says go ok.
Then.....BP Download failed.....
Click to expand...
Click to collapse
dont add the nprg file to the gb baseband it will fail then i have already mention there in block letters
The Droid Master said:
dont add the nprg file to the gb baseband it will fail then i have already mention there in block letters
Click to expand...
Click to collapse
I haven't added it...But still it fails...
Do we have to delete the old NRPG file...???
Arushvds said:
I haven't added it...But still it fails...
Do we have to delete the old NRPG file...???
Click to expand...
Click to collapse
what is the size of the file you downloaded.have you download the right one which i have mentioned.
The Droid Master said:
what is the size of the file you downloaded.have you download the right one which i have mentioned.
Click to expand...
Click to collapse
File Name: 591316_8376_WCDMA_V3025
File Size: (before extraction) : 23.2 MB
(after extraction) : 70.1 MB
Arushvds said:
File Name: 591316_8376_WCDMA_V3025
File Size: (before extraction) : 23.2 MB
(after extraction) : 70.1 MB
Click to expand...
Click to collapse
then you have downloaded the right file.Have you installed the right drivers.
The Droid Master said:
then you have downloaded the right file.Have you installed the right drivers.
Click to expand...
Click to collapse
Yes I do have the proper drivers..If I didn't have had them then how would I have updated my baseband..
The Droid Master said:
then you have downloaded the right file.Have you installed the right drivers.
Click to expand...
Click to collapse
And yeah the procedure was further done...
after the go ok...it starts downloading some files...
After that....A red screen with Ap (and some chinese language written) appears on the fastboot status screen.......
and then nothing happens..My phone boots with the normal way...
When I restore any backup, it says, MD5 mismatch...
and when I install any new ROM, it says download complete but nothing happens.....
Great Job !
Awesome ! Just Great Job .....
Hopefully these Chinese Phones are Kicking Ass Outta the other phones in the Range ! :laugh:
Arushvds said:
And yeah the procedure was further done...
after the go ok...it starts downloading some files...
After that....A red screen with Ap (and some chinese language written) appears on the fastboot status screen.......
and then nothing happens..My phone boots with the normal way...
When I restore any backup, it says, MD5 mismatch...
and when I install any new ROM, it says download complete but nothing happens.....
Click to expand...
Click to collapse
the chinese message will come its all normal you have not properly backed up the rom i think so you should download the backup file provided in the group(fb).
The Droid Master said:
the chinese message will come its all normal you have not properly backed up the rom i think so you should download the backup file provided in the group(fb).
Click to expand...
Click to collapse
The Chinese message comes on a RED SCREEN...
Tried many backups and also tried the Storm rom.....But doesn't work..
Really stressed...Phone is bricked...
Hello,
This thread just to share two roms I made from original kdz D80220H.
I've tested each, installed from TWRP 2.8.1.1, after wipe system,data,cache and dalvick.
Both can be flashed on 16Go or 32 Go device.
---
The first one is a pure stock rom without root and with the stock recovery,that can be flashed from a custom recovery.
Root and custom recovery will be lost after the flash of this one .
For the root, for my part, I let TWRP 2.8.1.1 do so by following, by accepting the proposal he made to me at my request to reboot system after the flash. I was so easily rooted again.
For the custom recovery, the patched kernel does not yet exist for this version, installing a custom recovery you would lose the benefit of the news that may contain the kernel of this new firmware version.
Download link of this pure stock rom D80220H open eur, without root and with the stock recovery:
https://www.androidfilehost.com/?fid=95784891001610945
---
And the second is the same, but prerooted (SuperSu preinstalled) and allowing to keep the custom recovery.
Custom recovery will be kept after the flash of this one .
It's prerooted and with 20D Knock code Cloudyfa kernel integrated (simple stock KC kernel, just patched).
This pure stock rom D80220H open eur, prerooted and friendly custom recovery can be downloaded here:
https://www.androidfilehost.com/?fid=95784891001611050
---
Thank's to:
@thecubed for his [python][Tool] LG Compressed KDZ Extractor
@cybojenix for his tool (system merger)
@bullghost for his windows GUI version [TOOL] KDZ and TOT Extractor
and for the one prerooted, friendly custom recovery:
@Cloudyfa for the kernel and permission to integrate it, @bender_007 and @citytrader for their advice for the integration of patched kernel, @autoprime for his ioroot25 that inspired the way I proceeded to preroot, @Chainfire for his SuperSu
---
Info, explanations:
To have a custom recovery in the G2 in KK version, we need to have a downgraded bootloader in JB version, and a patched kernel for being able to boot behind this bootloader.
Downgraded bootloader, because KK bootloader was patched by LG to stop the loki exploit (http://forum.xda-developers.com/showthread.php?t=2292157, https://github.com/djrbliss/loki). So we have to use the one that is lokiable, the JB one.
The patched kernel (https://github.com/JackpotClavin/an...mmit/7b6187a0e5fb8ca59888cacf5f5b863baa8d1064) can only be produced if the sources were published, and it is not the case for 20H. The latest version released back to the 20D:
https://www.lg.com/global/support/opensource/opensourceList?types=ALL&search=d802.
However, the latest patched kernel available (the one containing knock code) should work fine.
But if changes (improvements) were made on the 20H (I do not know if this is the case, and I don't think it is), the benefit of these innovations would be lost with the installation of an older kernel.
Note: It was the same situation with the 20f and the 20G.
Reference:
http://forum.xda-developers.com/showthread.php?t=2667227
http://forum.xda-developers.com/showpost.php?p=56082714
note:
Recently codefire team realized a new way to get around locked bootloader.
This system (BUMP) allow to keep the bootloader in kk version but obliged to bump kernel and recovery.
What are the differences?
kpyhere said:
What are the differences?
Click to expand...
Click to collapse
between ?
G and H of course
kpyhere said:
G and H of course
Click to expand...
Click to collapse
One letter
More seriously, for the moment I don't know. New version, new flash
in this can we get stock kernel because other kernels are always a battery burner for me
It's prerooted and with 20D Knock code Cloudyfa kernel integrated (simple stock KC kernel, just patched).
This pure stock rom D80220H open eur, prerooted and friendly custom recovery can be downloaded here:
https://www.androidfilehost.com/?fid=95784891001611050
Click to expand...
Click to collapse
mor_1228 said:
in this can we get stock kernel because other kernels are always a battery burner for me
Click to expand...
Click to collapse
It's the stock kernel, in a 20D version.
I just gave all explanations about that in OP.
If i flash the no root version after i can root my device with towelroot?
Pilone92 said:
If i flash the no root version after i can root my device with towelroot?
Click to expand...
Click to collapse
It was reported that towelroot no more works in 20G, so we can imagine it doesn't in 20H too.
ioroot works well, i tried it, with adb sideload.
It was reported that stump root worked too, in 20G, I don't know with 20H.
is anybody know whats the cl from 20f to 20h? or its just small apps updates?
I still have root after flash this because the recovery flashed after super su
Inviato dal mio nexus 7 utilizzando Tapatalk
@6ril1... Can somboons debloater zip be flashed on this rom?
mab71 said:
@6ril1... Can somboons debloater zip be flashed on this rom?
Click to expand...
Click to collapse
I don't use it but if you look at the updater-script (in the zip) it just deletes apps (and .odex when need) in /system and /data, so it should work, i think.
6ril1 said:
I don't use it but if you look at the updater-script (in the zip) it just deletes apps (and .odex when need) in /system and /data, so it should work, i think.
Click to expand...
Click to collapse
Yes.. It did work. Thanks
Is there any benefit on upgrading from the G version to the H version? Is one more stable than the other or are they roughly the same?
Sent from my LG-D802 using XDA Free mobile app
It's more fluid.
Baseband is updated too?
6ril1 said:
I don't use it but if you look at the updater-script (in the zip) it just deletes apps (and .odex when need) in /system and /data, so it should work, i think.
Click to expand...
Click to collapse
hi 6ril1, I flashed the zip debloater of somboons and it seems go well for your rom :good:
I wanna thank you for your work and for rom prerooted expecially :fingers-crossed:
I also tried smallnavbar mod of somboons but it doesn't work, g2 goes in bootloop
PYCON said:
Baseband is updated too?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gasReal said:
I also tried smallnavbar mod of somboons but it doesn't work, g2 goes in bootloop
Click to expand...
Click to collapse
Hi, why not making your own ?
http://forum.xda-developers.com/showthread.php?t=2657864
6ril1 said:
Hi, why not making your own ?
http://forum.xda-developers.com/showthread.php?t=2657864
Click to expand...
Click to collapse
I'm not able to, sorry :crying:
I'm not english man
LG G3 D851 Lollipop (T-Mobile US)
This thread contains multiple ways to get to T-Mobile's first Lollipop update, 20B. The 2nd post has a custom L build I made which has all the T-Mobile things removed (including wifi/lte calling).
20B TWRP-FLASHABLE ZIPS
LGD851.20B.SYSTEM-iNb4TMO.zip
MD5: 94c75957ae197ec45d0f562a2ae6768d
Stock 20B flashable system/rom... stock... exactly as T-Mobile intended it. Yes, TMO Wifi/LTE calling.
LGD851.20B.MODEM-iNb4TMO.zip
MD5: 62a5522cb71d1f8cc0bde9d0c48f6143
Stock untouched 20B flashable modem. Contains only the 20B modem.img.
LGD851.20B.BOOT-iNb4TMO.zip
MD5: 3d9fc3a5becd198b80c52c66ba0091a3
Stock repacked 20B flashable boot/kernel. Contains only the 20B boot.img.
LGD851.20B.BOOTLOADER-iNb4TMO.zip
MD5: 4f18399a8dbe006df3ad95709b3ed377
Stock flashable 20B boot stack. Contains 20B aboot, dbi, factory, laf, rpm, sbl1 and tz.
Directions:
Must be rooted. Use PurpleDrake or the new LG root floatin' around.
Be sure you are using TWRP v2.8.6 or higher. YMMV with other versions. DOWNLOAD TWRP HERE
Be sure all apps/data have been backed up (Helium/Titanium Backup) if you plan on restoring apps.
Be sure to have an EFS backup. If you don't.. you can make an EFS backup in TWRP or using the directions in my thread.
1. D/L n' flash 4 zips: 20B BOOTLOADER zip, SYSTEM zip, MODEM zip and BOOT zip.
2. Do a factory reset in TWRP (Wipe > swipe)
3. Done.. reboot TWRP into Lollipop. Be ready to wait up to 5min on first boot.
20B Stock Images
These are the untouched stock images from the official T-Mobile Lollipop 20B update for the LG G3 D851.
System.img only comes as a flashable zip.. easy install and saves space. Loose images can be flashed manually or packed in a zip.
Manual .IMG Installation
Code:
[SIZE="2"]dd if=/sdcard/[I]imagenamehere.img[/I] of=/dev/block/platform/msm_sdcc.1/by-name/[I]nameofpartitionhere[/I]
example:
dd if=/sdcard/[I]modem.img[/I] of=/dev/block/platform/msm_sdcc.1/by-name/[I]modem[/I]
*command assumes image is in root of internal storage.[/SIZE]
MD5 SUMS:
aboot.img MD5: 1be25ee4815ae48ef78b30bd53b1d8bf
boot.img MD5: cb84dd6e306797b38c8c71ec8a84726f
dbi.img MD5: 5410be69081b626dddcbae4a756f4a6e
factory.img MD5: def65ab1cc4c8a32f89e576f4c6a35b5
laf.img MD5: 90244c936e874d74dfe79249d9aacc88
modem.img MD5: 86bc66a4d35a1fcd815cb74b1d6771e2
recovery.img MD5: d0916f032e61c2549d2cbddd1b9f1b45
rpm.img MD5: 6f10a2a1e77d3a55e1d5d081a203c7c5
sbl1.img MD5: 0de2c07a37574732dacaac6f04c699cb
tz.img MD5: c3a3ff555a0a0de3bbbe37f07cb5e026
20B OTA UPDATE
D85110r_00-D85120b_00_update.zip
MD5: 204ca98458c4e2f14c35f6694f1f8b3d
This is the 10R -> 20B OTA update zip. Rather than waiting for it to push to your phone from T-Mobile.. you can manually install it as long as you are on STOCK 10R and have STOCK RECOVERY and are ROOTED. Other than root you must be 100% stock. If you deleted any stock apps that were in /system or installed xposed etc there is a very good chance you will not pass the updates system check before the update actually flashes. The update zip patches pre-existing files rather than adding full new files.. this helps keep the OTA zips file size down... and is also why ALL system files and your kernel/boot partition is checked before it flashes. The zip will FAIL if you have TWRP installed.
1. Download the OTA update zip from the D851 20B folder HERE
2. Copy the update zip into the cache folder (this is why you need root) then rename it: update.zip
3. Open Phone dialer > dial 3845#*851# > select WCDMA-Only -- DM/FOTA Test -- internal -- update
your phone will reboot then show: "Installing system update" with the lil green android guy. wait... done.
You will lose root after the update and be 100% stock again.
20B KDZ Method
T-Mobile D851 20B KDZ
To flash the KDZ manually read the thread HERE. Flashing KDZ will remove TWRP... you'd have to re-root then reinstall TWRP (if you even wanted it of course).
LG Mobile Support Tool
Download this Windows-based tool to update to 20B. This tool auto-downloads the KDZ and installs it for you. Install... run and follow the onscreen directions. If the app doesn't seem to start the upgrade try manually selecting: Options > Upgrade Recovery
@Chrishup has posted a rundown of how he updated using the Mobile Support Tool HERE.
Donate:
Donate HERE if you'd like to buy me a beer.. a pizza.. or help contribute to my LG G4 fund :good:
DOWNLOAD FROM CODEFIRE
Click to expand...
Click to collapse
Custom Rom
LGD851.20L-ollipop.I.UNICRON-iNb4TMO.zip
MD5: f1de51acffe17435c8172b4b0cd28cbc
This rom/kernel is not to be repacked or used as the "base" in your #yoloswag420 rom.
*This rom comes with a kernel so a boot.img or boot zip is NOT needed.
LGD851.20L-ollipop.I is a fusion of LG's 5.0 and 5.0.1, including some 20B bits. It has all things "T-Mobile" removed from the rom (except APN). If you don't need any T-Mobile features and want a minimal/debloated stock LG Lollipop experience this may be the rom for you.
LGD851.20L-ollipop.I's UNICRON build is most likely the final build for "v1". LGD851.20L-ollipop.II will start up when newer LG builds are available, most likely with Android 5.1.
Few Highlights:
Debloated
Stock LG Lollipop, no "tmo-ness"
Built-in PrimeTether
Rooted + Busybox
Updated Firmware
Ext-SD card Write Mod
Built-in kernel certified by savoca®
Supports @savoca's great mods:
on-the-fly screen sharpness on/off via Whetstone
display calibration with his KCAL Color Control app
Certified SAVOCA kernel is GPL-compliant
Whetstone - Download HERE
Color Control - Download HERE
KCAL/Color Control Videos - HERE and HERE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Directions:
Must be rooted. Use PurpleDrake or the new LG root floatin' around.
Be sure you are using TWRP v2.8.6 or higher. YMMV with other versions. DOWNLOAD TWRP HERE
Be sure all apps/data have been backed up (Helium/Titanium Backup) if you plan on restoring apps.
Be sure to have an EFS backup. If you don't.. you can make an EFS backup in TWRP or using the directions in my thread.
1. D/L n' flash 3 zips: 20B BOOTLOADER zip, UNICRON zip and MODEM zip.
2. Do a factory reset in TWRP (Wipe > swipe)
3. Done.. reboot TWRP into Lollipop. Be ready to wait up to 5min on first boot.
DOWNLOAD FROM CODEFIRE
Donate:
Donate HERE if you'd like to buy me a beer.. a pizza.. or help contribute to my LG G4 fund :good:
T-Mobile D851 20B Source
Look for L 20B under the LGD851TN section.
Chat
Don't forget you can chat amongst yourselves in the g3 IRC channel... HERE
Upgrade to Lollipop and can't download anything or write to internal sdcard? Fix yo permz. This doesn't fix extSD issues.
Code:
su
restorecon -FR /data/media/0/
Click to expand...
Click to collapse
nou
About time, Tmo!
Great guns.
Thanks Autoprime.
You are the King.
Awesome
---------- Post added at 07:03 AM ---------- Previous post was at 06:49 AM ----------
Op says everything you need to know.... READ BEFORE YOU FLASH!!!!
Awesome sauce!!!!!
What version of lollipop is this?
Flashed it.
Everything running great except for calls and data, as mentioned by @autoprime.
Thanks man for this exciting preview.
Waiting for a working Modem.
So excited for this. We just need that radio.
Root???? Justo flash supersu??
aleks_ said:
So excited for this. We just need that radio.
Click to expand...
Click to collapse
Once we get that radio, we will be all set.
@autoprime. As far as you know the official release doesn't lock the bootloader and downgrade is still available correct?
as soon as i see one with all the tmoness i will flash and use, would love to see one with the In-Flight and WiFi Texting working
so to install lollipop i have to flash this file? LGD851_20L-ollipop-iNb4TMO.zip
fr3d0x said:
so to install lollipop i have to flash this file? LGD851_20L-ollipop-iNb4TMO.zip
Click to expand...
Click to collapse
yes, but you will have spotty data and calls
techfreak243 said:
yes, but you will have spotty data and calls
Click to expand...
Click to collapse
i flashed but when im going to reboot theres no os
fr3d0x said:
i flashed but when im going to reboot theres no os[/QUO
Ignore that it boots just fine as long as you flashed the boot.img as well.
Click to expand...
Click to collapse
Jeff Zaugg said:
fr3d0x said:
i flashed but when im going to reboot theres no os[/QUO
Ignore that it boots just fine as long as you flashed the boot.img as well.
Click to expand...
Click to collapse
ok ill try agian
EDIT: It works
Click to expand...
Click to collapse
Can we use a modified modem from like Cm12? for service.
cammykool said:
Can we use a modified modem from like Cm12? for service.
Click to expand...
Click to collapse
Give it a shot and report back, maybe you'll be the one that finds a temporary solution! [emoji2]
[ROM发布][CAF][LG G2][全机型] Flyme 4.5.4.5R ( 30/01/2016 )
http://pan.baidu.com/s/1kT6emZ9
pass: rib6
flyme_LG-D802_moonlight_4.5.4.1R for D800/802
this rom has navigation bar.
http://www.miui.com/thread-3187301-1-1.html
http://pan.baidu.com/s/1dDE0Vux
[CAF][LG G2][全机型] Flyme 4.5.4.1R ( All variant )
Some small fix
China Aurora installer
https://drive.google.com/folderview?id=0B7Psi_9p_zAfaVoySnZqYVVlNjg&usp=sharing#list
[CAF][D802/L01F] Flyme 4.5.3.3R ( 06/11/2015 )
link: http://pan.baidu.com/s/1kT6emZ9
pass: rib6
http://bbs.flyme.cn/thread-414255-1-1.html
Flyme 4.5.3.2R_Path for D800, D801, F320, ls980, vs980 ( 28/10/2015 )
[CAF][D802/L01F] Flyme 4.5.3.2R ( 26/10/2015 )
Base on : CM12.1-YOG4P
Mod: add remote control support / double click to unlock /v4a (need to be compatible mode)
More resources are from XDA
Known issues: call recording is required for third party applications play
Method of use: 4.4 (in the bottom of caf/lg5.0.2 direct Siqing brush package)
Other: for the first time to start the need for about 5 minutes, please be patient
Integrated SuperSU! No virtual keys
A recommendation for multi task switching is used to set up a GMD for a gesture.
link: http://pan.baidu.com/s/1kT6emZ9
pass: rib6
https://drive.google.com/folderview?id=0B7Psi_9p_zAfaVoySnZqYVVlNjg&usp=sharing
Click to expand...
Click to collapse
updater-script.rar http://forum.xda-developers.com/showpost.php?p=63702765&postcount=26
Click to expand...
Click to collapse
Flash LP bootstack first if you get music bug
Flash laster superSU for root.
Flash any Gapp 5.1.1 for Google services.Flash gapp after first boot ( recommend gapps-5.1-arm-2015-07-17-13-29.zip )
To customise Flyme OS use 魅化UI-1.2.0.apk ( need rooted and xposed )
Click to expand...
Click to collapse
This is my modify for Smarttouch : Tap:back Double tap:Launch task manager Hold:Move Slide up:Back to hom screen Slide down:End current process Slide left or right:Switch between tasks
Click to expand...
Click to collapse
Original China forum link : http://bbs.flyme.cn/thread-414255-1-1.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
底包：CM12.1-YOG4P
mod：添加遥控支持/双击解锁/v4a（需兼容模式）
以上资源均来自XDA
已知问题：通话录音需第三方应用播放
使用方法：需4.4底层（在用caf/lg5.0.2直接四清刷包）
其它：首次启动需5分钟左右，请耐心等待
已集成SuperSU！没有虚拟键
需要多任务切换的推荐用GMD设个上划手势
致谢：Nemo先生 贴吧和群里测试的同学
链接:
本帖隐藏的内容
http://pan.baidu.com/s/1kT6emZ9
密码: rib6
================================
更新d800/d801（未测）/f320/ls980/vs980机型补丁
更新ls980补丁脚本（加入面板识别）其他机型如有花屏问题请反馈
请注意使用方法！
================================
问题汇总：
应用横屏状态下锁屏解锁后屏幕卡死
联系人导入/电信卡归属地显示荷兰（待官方修复）
wifi无法自动连接（可以尝试清除后重连）
微信无法语音（换旧版）破音（请参考aosp）
双击解锁有时会失效 续航正常使用亮屏6小时左右
Flyme开机需连网校时，请稍候片刻
Click to expand...
Click to collapse
#14 http://forum.xda-developers.com/showpost.php?p=63666310&postcount=14
tblinshi1234 said:
download the flyme-4.5.3.2R-20151026-d802.zip
1:confirm you are in lp bootstacks (it's better with 4.4 bl,I recommend this one:http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219)there's no need to flash lp bootstacks again if you're using CAF AOSP 5.1.1 or LG ROM based on LG Stock 5.0.2
2:download the "updater-script" file and flyme 5.1_4.5.3.2R_LS980 patch.zip in the 机型补丁 folder(here:http://pan.baidu.com/s/1kT6emZ9 password:rib6)
3:replace the (flyme-4.5.3.2R-20151026-d802.zip\META-INF\com\google\android\updater-script )file with your download one.
4:wipe data/cache/dalvik/system in twrp recovery
5:flash the flyme-4.5.3.2R-20151026-d802.zip which you have replaced the updater-script file
6:flash flyme 5.1_4.5.3.2R_LS980 patch.zip
7:reboot
it's the same method for D800/801/VS980 to flash this rom
---------- Post added at 09:45 AM ---------- Previous post was at 09:39 AM ----------
open /system/build.prop with text editor，find "qemu.hw.mainkeys=1" edit it to→qemu.hw.mainkeys=0
then
reboot
Click to expand...
Click to collapse
good news！ I like it.
trying now
rom doesnt work. on wellcome screen after choosing language, settings has stopped. can't do nothing more
/d802
How can i enable navigation bar ?
edit: enabled from build.prop
tnx
Mine
Enviado desde mi LG-D800 mediante Tapatalk
how to flash on ls980 i get error in twrp
""assert failed.. get prop..ro product device d802''
kimush said:
how to flash on ls980 i get error in twrp
""assert failed.. get prop..ro product device d802''
Click to expand...
Click to collapse
Probably need to wait on some patch for CDMA devices. Always ends up working out that way from Chinese ports.
tomasznique said:
rom doesnt work. on wellcome screen after choosing language, settings has stopped. can't do nothing more
/d802
Click to expand...
Click to collapse
try 4 wipe, flash LP bootstack then flash rom.my d802 don't have these bugs
serhangelgor said:
How can i enable navigation bar ?
edit: enabled from build.prop
Click to expand...
Click to collapse
Let's learn to use smarttouch.That's funny
kimush said:
how to flash on ls980 i get error in twrp
""assert failed.. get prop..ro product device d802''
Click to expand...
Click to collapse
i don't have ls980.i think in your case : flash d802 rom then flash path for ls980
cvncbn said:
i don't have ls980.i think in your case : flash d802 rom then flash path for ls980
Click to expand...
Click to collapse
Already tried that,
i even edited the build prop file to ls980 but still get same message.
kimush said:
how to flash on ls980 i get error in twrp
""assert failed.. get prop..ro product device d802''
Click to expand...
Click to collapse
download the flyme-4.5.3.2R-20151026-d802.zip
1:confirm you are in lp bootstacks (it's better with 4.4 bl,I recommend this one:http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219)there's no need to flash lp bootstacks again if you're using CAF AOSP 5.1.1 or LG ROM based on LG Stock 5.0.2
2:download the "updater-script" file and flyme 5.1_4.5.3.2R_LS980 patch.zip in the 机型补丁 folder(here:http://pan.baidu.com/s/1kT6emZ9 password:rib6)
3:replace the (flyme-4.5.3.2R-20151026-d802.zip\META-INF\com\google\android\updater-script )file with your download one.
4:wipe data/cache/dalvik/system in twrp recovery
5:flash the flyme-4.5.3.2R-20151026-d802.zip which you have replaced the updater-script file
6:flash flyme 5.1_4.5.3.2R_LS980 patch.zip
7:reboot
it's the same method for D800/801/VS980 to flash this rom
---------- Post added at 09:45 AM ---------- Previous post was at 09:39 AM ----------
serhangelgor said:
How can i enable navigation bar ?
edit: enabled from build.prop
Click to expand...
Click to collapse
open /system/build.prop with text editor，find "qemu.hw.mainkeys=1" edit it to→qemu.hw.mainkeys=0
then
reboot
don't flash gapp before first time of system start
you can flash gapp after it
otherwise, you will be blocked on welcome screen
cvncbn said:
try 4 wipe, flash LP bootstack then flash rom.my d802 don't have these bugs
Click to expand...
Click to collapse
thanks for your reply. Of course i did full wipe, and came from 12.1 so there was no need to flash bootstack.
The problem was caused by flashing gapps after flashing rom.
x551 said:
don't flash gapp before first time of system start
you can flash gapp after it
otherwise, you will be blocked on welcome screen
Click to expand...
Click to collapse
I did what u said and now it's fine. Thank you.
Now testing
Flash failed on twrp. welp.
currently on blisspop, android version 5.1.1 and variant is f320k
How do I download it without making an account?
Great rom, and with render kernel is better
For those who have boot issues, you may install hybrid boot stack for your model, reboot into recovery again, install this rom, then gapps, and finally render kernel and enjoy it.
Thanks :thumbup:
Sent from my LG-D802 using XDA Free mobile app
Thread added to index
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are for the H815 variant only. Files are from software version 20B (Android 6.0 Marshmallow).
Included below: TWRP-flashable stock rom, boot, modem and bootloader zips. KDZ and individual images are also included.
*There is NO anti-rollback qfuse used in this update... you can downgrade using LGUP HERE. You can also use LGUP to flash the 20B KDZ.
Please do not mirror my files!
20B NOTES...
1. Knock code should be back.
2. Not sure what else has changed yet...
Requirements:
You must have TWRP 2.8.7+ installed to use these files. Thanks to Dees_Troy as always for that. And, of course, you must have your bootloader unlocked for TWRP to work. Currently only H815 EU and (some) SEA variants have official unlock through LG's unlock page HERE. Please do not ask if "model x" is supported... did you unlock via LG's official unlock tool? Yes? then you can use it. No? then you can't... and you should just flash the KDZ instead.
If you have a locked bootloader and want to upgrade... just use LGUP and flash the KDZ. Don't risk it with FlashFire.
Install Directions:
These directions should be used by everyone who wants a rooted 20B system. Don't want root? Then it's probably easiest to just flash the stock KDZ... or just skip the supersu zip in the directions below.
1. Download the boot, modem, bootloader and system zips listed under the download section and place them on internal or external sdcard.
2. Also download the latest SuperSu zip from HERE [Thanks to Chainfire for his auto-patching boot.img version!]
3. (re)Boot into TWRP... don't wipe anything.
4. Backup current partitions: boot, system, data, efs
5. Install boot, bootloader, modem, system and supersu zips- ADD SUPERSU LAST! (Install > select zip > press "add more zips" > select next zip > repeat)
6. After all 5 zips finish flashing you can reboot! (if TWRP asks if you want to install SU, NO!!!)
Downloads:
LG-H81520B-Flashable.System.zip
100% stock untouched system. MD5 = 22edce52ca96e20f7a16a67d00934b4d
Mirror here.
LG-H81520B-Flashable.Modem.zip
This is a flashable stock 20B modem.
LG-H81520B-Flashable.Boot.zip
This is a flashable stock 20B boot.img. Boot.img contains kernel + dtb + ramdisk.
LG-H81520B-Flashable.Bootloader.zip
This is a flashable stock 20B bootloader. It contains aboot, factory, hyp, laf, pmic, raw_resources, rpm, sbl1, sdi, sec and tz. Do NOT wipe system before flashing this zip. Zip checks model before flashing.
Also, KDZ + all stock images for 20B are available here.
CODEFIRE DIRECTORY
Downgrade:
See the Downgrade section in my 20A thread HERE...
OR
Use LGUP HERE to flash a previous KDZ version.
Unofficial Bootloader Unlock:
Don't have official bootloader unlock? This guy claims to have a working method HERE...
#TEAMCODEFIRE
Click to expand...
Click to collapse
y u quote OP?
*reserved*
I may use this space to respond to some questions or add more notes as we go... rather than making new posts in the thread that get lost or go unnoticed.
FAQ
Q: My device shows the wrong software version in settings.. how do I fix this?
A: This is related to the "cust" (customer) partition on your phone. Using TWRP or a "Root Explorer" type app you can delete the current files in your Cust partition then you should have the proper version showing. I am not a fan of adding or flashing the cust partition... so I don't include updated cust partitions in the flashables. The cust folder/partition is in the root of your main directory.
Thanks Boss! U the man, as usual...
thanks @autoprime
I suggest you add a "NEW" on the title of the thread! because it seems the old thread! I had not noticed it at the beginning!
Thanks Auto!
Thanks mate!
Sent from my LG G4 using Tapatalk
Hi, anyone try Xposed with this version ?
can this modem be used on 20A based ROMS? - because my LTE reception with 20A is pretty weak, wants to slip back into HSPA mode in fringe areas where other phones have worked well.
.......
Enviado desde mi LG-H815 mediante Tapatalk
Hmm slightly odd in that when i go to setting-software info it says the software version is "7 HD 6.1 by S3VEN-234-15". Haven't used 7 HD for probably a month now and dirty flashed this from V20a. Odd, very odd.
sudman said:
Hmm slightly odd in that when i go to setting-software info it says the software version is "7 HD 6.1 by S3VEN-234-15". Haven't used 7 HD for probably a month now and dirty flashed this from V20a. Odd, very odd.
Click to expand...
Click to collapse
delete cust folder..
S7VEN is everywhere
Sent from my LG-H815 using Tapatalk
First impressions?
Changelog from 20a?
Paolo83 said:
Changelog from 20a?
Click to expand...
Click to collapse
Please Read OP!
20B NOTES...
1. Knock code should be back.
2. Not sure what else has changed yet
I install with this method but that don`t change my software version i still have V10e-260-01, but android version is changed to 6.0.
?
Sweet! The KDZ is there
So for those of us with a locked booloader, no root etc, we can just flash / update to 20B via LGUP and retain all of our nothing fun (root and locked bootloader)?
Flashed fine H815P with LG UP.
Thanks,
VW
can't download the KDZ. tried 3 times, stopped at 67.5% everytime. how can i solve this problem?
victorwalter said:
Flashed fine H815P with LG UP.
Thanks,
VW
Click to expand...
Click to collapse
Can you give a feedback about battery and bugs? Thanks