Develop Bugs

[Q] Tmobile gn2 brick

Hi I was able to root my tmobile gn2 using a guide which worked perfectly fine. But I wanted to unroot my phone but due to incomplete research and knowledge my phone is now bricked. The guide i followed didn't specifically mention regarding US carriers so I went ahead and tried to unroot with other GT-7100 firmwares available and when I tried to flash with ODIN i kept getting failures and now it is stuck in the "firmware upgrade encountered an issure. Please select recovery mode in Kies & try again". I tried it was just an error with the firmware so i tried another one, but nonetheless it failed and somehow my binary count went up to 3.
I tried going into recovery but it doesn't work, but I am still able to get into the ODIN download screen.
I'm not really sure what to do at this point.
I would really appreciate any help

Did you try the method here?
http://forum.xda-developers.com/showthread.php?t=1957209
Just download that rom and follow the steps to install it. Hopefully that works for you.
Sent from my SGH-T889 using Tapatalk 2
---------- Post added at 04:54 PM ---------- Previous post was at 04:52 PM ----------
Since tmo galaxy note 2 has its own forum only download roms or any other firmwares from there so you do not risk bricking yoyr device.
Sent from my SGH-T889 using Tapatalk 2

minhajmsd said:
Did you try the method here?
http://forum.xda-developers.com/showthread.php?t=1957209
Just download that rom and follow the steps to install it. Hopefully that works for you.
Sent from my SGH-T889 using Tapatalk 2
---------- Post added at 04:54 PM ---------- Previous post was at 04:52 PM ----------
Since tmo galaxy note 2 has its own forum only download roms or any other firmwares from there so you do not risk bricking yoyr device.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
I actually did look through the thread but I was too afraid to do anything else since I might make my situation worse, but I think I might go ahead and try it.
I just follow the same procedure right? download the zip file and flash it with odin?

Flash CWM Recovery with odin. Once that is done flash rom through the recovery.
Sent from my SGH-T889 using Tapatalk 2
---------- Post added at 05:17 PM ---------- Previous post was at 05:16 PM ----------
You have to add the rom file to your sdcard first though
Sent from my SGH-T889 using Tapatalk 2

would i need a microsd adapter for that since im not able to do it through my phone?

xquie said:
would i need a microsd adapter for that since im not able to do it through my phone?
Click to expand...
Click to collapse
No need sdcard when you flash through PC and that is only option for you now.
What exactly your phone model ?

simplelife said:
No need sdcard when you flash through PC and that is only option for you now.
What exactly your phone model ?
Click to expand...
Click to collapse
Tmobile SGH-T889
So the method minhajmsd mentioned earlier isn't an option for me?

xquie said:
Tmobile SGH-T889
Click to expand...
Click to collapse
You can try this
http://forum.xda-developers.com/showthread.php?t=1957209

simplelife said:
You can try this
http://forum.xda-developers.com/showthread.php?t=1957209
Click to expand...
Click to collapse
ah sorry im really new to this so im a bit confused. My phone got bricked while attempting to unroot..
and i happened to notice the method you provided me was to "root" -- so if I reroot it, will it get me out of brick?
--------
I actually just flashed recovery with ODIN and my phone booted but my phone detects no service...
any idea what i should do next?

xquie said:
ah sorry im really new to this so im a bit confused. My phone got bricked while attempting to unroot..
and i happened to notice the method you provided me was to "root" -- so if I reroot it, will it get me out of brick?
--------
I actually just flashed recovery with ODIN and my phone booted but my phone detects no service...
any idea what i should do next?
Click to expand...
Click to collapse
Try to flash TMO modem to see if get back the network. http://forum.xda-developers.com/showthread.php?t=1957380
In the mean time, can you check on your still have SuperSu app and method I try on the other post are reflash stock rom to get you back on feet,not reroot .Since you can boot your phone but no network then flash modem first to see if it's work again

simplelife said:
Try to flash TMO modem to see if get back the network. http://forum.xda-developers.com/showthread.php?t=1957380
In the mean time, can you check on your still have SuperSu app
Click to expand...
Click to collapse
I will go ahead and flash the TMO modem thank you!
and yes I still do have Supersu

xquie said:
I will go ahead and flash the TMO modem thank you!
and yes I still do have Supersu
Click to expand...
Click to collapse
Ok.let me know how it go.good luck
1 download modem save into excard
2 turn off phone.hold home + volunm up 1st then hold power together about 5 second will put your note into CWM
3 from CWM . Install from excard.modem file..intall.yes.
4 reboot system.done

simplelife said:
Ok.let me know how it go.good luck
Click to expand...
Click to collapse
I was reading the directions and then I realized I am not 100% sure how to flash through custom recovery.
Do I add the tmo modem into my sdcard and open rom manager and reboot to recovery?

xquie said:
I was reading the directions and then I realized I am not 100% sure how to flash through custom recovery.
Do I add the tmo modem into my sdcard and turn off my phone. then press the vol up + center home + power to go into recovery mode?
Click to expand...
Click to collapse
Yes .you need to save in sdcard but remember where so you can get and follow my last post instructions.

simplelife said:
Yes .you need to save in sdcard but remember where so you can get and follow my last post instructions.
Click to expand...
Click to collapse
I just flashed the modem through cwm but i still don't have connection.
Was I suppose to do a data wipe/factory reset before i flash it or it doesnt matter?
Should i go straight to flashing the SGH-T889 Stock Deodexed UVALJ1 through cwm?

xquie said:
I just flashed the modem through cwm but i still don't have connection.
Was I suppose to do a data wipe/factory reset before i flash it or it doesnt matter?
Should i go straight to flashing the SGH-T889 Stock Deodexed UVALJ1 through cwm?[/QUOTE
Go to setting. About phone .check baseband and version.status check imec and network.reboot CWM wipe data.cach.davik.reboot.
If still no go. Flash stock rom
Click to expand...
Click to collapse

Go to setting. About phone .check baseband and version.status check imec and network.reboot CWM wipe data.cach.davik.reboot.
If still no go. Flash stock rom
Click to expand...
Click to collapse
basband version: unknown
android version: 4.1.1
build: JRO03C.T889UVALJ1
imei: unknown
are these okay?

xquie said:
basband version: unknown
android version: 4.1.1
build: JRO03C.T889UVALJ1
imei: unknown
are these okay?
Click to expand...
Click to collapse
No.it not. You still dont have modem and imei
You need to flash the stock rom to get your imei back after that flash the modem
Here what you need to do
Download stock rom & modem save inyo excard
Put into CWM .full wipe
Flash rom
Reboot into recovery not reboot systems
Flash modem.
Reboot system.done

simplelife said:
No.it not. You still dont have modem and imei
You need to flash the stock rom to get your imei back after that flash the modem
Did you flash N7100 rom before this happen ?
Click to expand...
Click to collapse
i didn't flash the stock rom, but i did try to flash other N7100 from other countries in an attempt to unroot.

simplelife said:
No.it not. You still dont have modem and imei
You need to flash the stock rom to get your imei back after that flash the modem
Here what you need to do
Download stock rom & modem save inyo excard
Put into CWM .full wipe
Flash rom
Reboot into recovery not reboot systems
Flash modem.
Reboot system.done
Click to expand...
Click to collapse
I just flashed the stock rom and its working now!!
wow thank you for guiding me through this and being so patient with me!! :good:
thank you so much!

It has begun!

I have been checking the wifes phone every morning for the last month. Looks like the Marshmallow update is about 1.3 gigs. I have no idea if it will be bug free, but I imagine it will be stable. Now, for those reading this, that are confused and on a stock ROM, go to settings, about device, and then software update.

It's working great so far..
Sent from my SM-G928T using XDA-Developers mobile app

There is some kind of update today can't get it till I get off of works says I need to use wifi.

richierich118 said:
There is some kind of update today can't get it till I get off of works says I need to use wifi.
Click to expand...
Click to collapse
It's marshmallow
Sent from my SM-G928T using XDA-Developers mobile app

Yes, both our S6 edge plus and the Note 5 received Marshmallow today from T-Mobile!!

I don't think I will take the update until I know we can still root and a custom recovery.

re: rooting Marshmallow 6.1
7STANG said:
I don't think I will take the update until I know we can still root and a custom recovery.
Click to expand...
Click to collapse
No need to bother with kernels it's not needed to ROOT MM 6.0!!!
1: odin flash twrp-3.0.2-0-zeroltetmo.img.tar, flash this after doing
the OTA Tmobile update of the mm 6.0 .
2: then in twrp recovery flash this supersu-v2.71-systemmode.zip.
If you do do it right, you will have no rooting issues.
Good luck,
Have a great day!

Misterjunky said:
No need to bother with kernels it's not needed to ROOT MM 6.0!!!
1: odin flash twrp-3.0.2-0-zeroltetmo.img.tar, flash this after doing
the OTA Tmobile update of the mm 6.0 .
2: then in twrp recovery flash this supersu-v2.71-systemmode.zip.
If you do do it right, you will have no rooting issues.
Good luck,
Have a great day!
Click to expand...
Click to collapse
How do I update toMM 6.0 I have custom recovery and custom kernel
Sent from my SM-G928T using XDA-Developers mobile app

AT&Tsucks said:
How do I update toMM 6.0 I have custom recovery and custom kernel
Sent from my SM-G928T using XDA-Developers mobile app
Click to expand...
Click to collapse
Misterjunky said:
No need to bother with kernels it's not needed to ROOT MM 6.0!!!
1: odin flash twrp-3.0.2-0-zeroltetmo.img.tar, flash this after doing
the OTA Tmobile update of the mm 6.0 .
2: then in twrp recovery flash this supersu-v2.71-systemmode.zip.
If you do do it right, you will have no rooting issues.
Good luck,
Have a great day!
Click to expand...
Click to collapse
Thanks MrJ, that is what I was hoping. I just wanted to be sure they didnt lock us out. I had that happen with AT&T with one of their updates!

AT&Tsucks said:
How do I update toMM 6.0 I have custom recovery and custom kernel
Sent from my SM-G928T using XDA-Developers mobile app
Click to expand...
Click to collapse
You are going to need to Odin the T-mobile stock firmware, which you can find on MinisterJunky's post here:
http://forum.xda-developers.com/tmo...rmware-g928t-complete-untouched-boh6-t3198387
After that, you just need to run software update from the settings and you should be good to go. I would highly recommend doing a factory reset after you ODIN the stock 5.1 firmware before updating to 6.01.

Need help...I odined back to 5.1.1 and factory reset after....Then updated MM of phone...Then made Sure OEM unlocked, rebooted into download and odin flashed TWRP 3.0.2 and it say PASS and when i reboot into recovery it reboots into stock recovery!!! I have tried a few times in odin and does the same thing, i reboot into stock recovery everytime
---------- Post added at 02:52 PM ---------- Previous post was at 02:47 PM ---------- @Misterjunky
Need help...I odined back to 5.1.1 and factory reset after....Then updated MM of phone...Then made Sure OEM unlocked, rebooted into download and odin flashed TWRP 3.0.2 and it say PASS and when i reboot into recovery it reboots into stock recovery!!! I have tried a few times in odin and does the same thing, i reboot into stock recovery everytime

Where did you get the twrp 3.0.2 from I've been looking for it you think you can share the link
Sent from my SM-G928T using Tapatalk

Misterjunky said:
No need to bother with kernels it's not needed to ROOT MM 6.0!!!
1: odin flash twrp-3.0.2-0-zeroltetmo.img.tar, flash this after doing
the OTA Tmobile update of the mm 6.0 .
2: then in twrp recovery flash this supersu-v2.71-systemmode.zip.
If you do do it right, you will have no rooting issues.
Good luck,
Have a great day!
Click to expand...
Click to collapse
So for some reason I am having the same problem trying to get this rooted.
I have made sure the OEM unock is enabled in develper settings
I boot into download mode, and I uncheck reset in options
I ODIN flash twrp-3.0.2-0-zeroltetmo.img.tar
I power off the phone, then I try to boot into recovery, the phone will show recovery is not enforcing (or whatever it says in red), then the screen just turns black.
Then I will reboot the phone again and it will remove the custom recovery.
Any suggestions will be much appreciated.

finally we got him.marshmallow update on s6 edge+ t mobile.now for customs rom?

SM-G928T Software Update Error
Hello!
Software update doesn't want to be installed on my SM-G928T device ( There is an error: "Failed to update software .... The downloaded file is invalid"
I tried to download and install it 3 times... But.. the same result) I have 19GB free space on my device and no any custom...
Help pls)

Luc098 said:
Hello!
Software update doesn't want to be installed on my SM-G928T device ( There is an error: "Failed to update software .... The downloaded file is invalid"
I tried to download and install it 3 times... But.. the same result) I have 19GB free space on my device and no any custom...
Help pls)
Click to expand...
Click to collapse
Try using a different internet connection!

spirithandler said:
Try using a different internet connection!
Click to expand...
Click to collapse
100% complete and after that the error appears... Tried 3 different internet connection)
Probably, it is better to wait for stock firmware and do it through the Odin. Ehh..

To anyone having probs. rooting the new DPD1 Marshmallow update, follow the guide HERE. Looks like dirtybudha has compiled everything in one post. Hit the thanks buttons!!!!!! It works perfect for both devices.

Samsung S6 SM-G920P SPRINT stuck on samsung logo on boot

I bought 2 Galaxy S6 devices, unlocked by the store I bought them from. 3 days ago my wifes phone rebooted and came up with the following error:
KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
I tried doing the smart switch restore, but the app doesn't like my model/SN combination. I got ODIN and a Lollipop 5.11.1 firmware for my model, flashed it using the ODIN flash procedure, that was successful, once my phone power cycled it is now stuck on the SAMSUNG logo startup screen and will not boot any further, the error messages have gone away. I can get it into recovery and download mode, but not sure what else to do to fix this bootup problem. Maybe the bootloader is toast?

canussie said:
I bought 2 Galaxy S6 devices, unlocked by the store I bought them from. 3 days ago my wifes phone rebooted and came up with the following error:
KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
I tried doing the smart switch restore, but the app doesn't like my model/SN combination. I got ODIN and a Lollipop 5.11.1 firmware for my model, flashed it using the ODIN flash procedure, that was successful, once my phone power cycled it is now stuck on the SAMSUNG logo startup screen and will not boot any further, the error messages have gone away. I can get it into recovery and download mode, but not sure what else to do to fix this bootup problem. Maybe the bootloader is toast?
Click to expand...
Click to collapse
KERNEL IS NOT SEANDROID ENFORCING ---> its not error and not important just a message that you use Custome Kernel or Recovery.
Go to Recovery and do Wiping (Cache,Data,All) and reboot it should boot.
if not download latest ROM (PD3 or PD2) and flash using ODin

mahdi72 said:
KERNEL IS NOT SEANDROID ENFORCING ---> its not error and not important just a message that you use Custome Kernel or Recovery.
Go to Recovery and do Wiping (Cache,Data,All) and reboot it should boot.
if not download latest ROM (PD3 or PD2) and flash using ODin
Click to expand...
Click to collapse
I tried recovery, that didn't work. I have not tried PD3 or PD2 ROM, I will try that and see how it goes.

canussie said:
I tried recovery, that didn't work. I have not tried PD3 or PD2 ROM, I will try that and see how it goes.
Click to expand...
Click to collapse
OK, I have found a few different ROMs, what would the filename of the PD2 or PD3 ROM be for the SM-G920p?

canussie said:
OK, I have found a few different ROMs, what would the filename of the PD2 or PD3 ROM be for the SM-G920p?
Click to expand...
Click to collapse
PD3 or PD2 is BuildNumber.PD2 released and after flashing that you can take PD3 from OTA Update. PD2 is based on Android 6.0.1
http://samsung-updates.com/details/65838//SM-G920P/SPR/G920PVPS3CPD2.html

Saafir said:
You can download both PD2 or PD3 from this thread so you don't have throttled download. Are you using Sprint for service, since you say its an unlocked device?
http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
Click to expand...
Click to collapse
No, I am not using sprint . I am using Telstra in Australia.

Saafir said:
You can download both PD2 or PD3 from this thread so you don't have throttled download. Are you using Sprint for service, since you say its an unlocked device?
http://forum.xda-developers.com/spr...uide-links-files-update-root-restore-t3366862
Click to expand...
Click to collapse
And also.. thank you for your help .

canussie said:
And also.. thank you for your help .
Click to expand...
Click to collapse
I flashed PD2, it goes further than it did before... instead of stopping at the Samsung Galaxy S6 logo, it now goes straight to the android recovery screen. Attached is the screenshot. I am downloading PD3 and will try that next.

canussie said:
I flashed PD2, it goes further than it did before... instead of stopping at the Samsung Galaxy S6 logo, it now goes straight to the android recovery screen. Attached is the screenshot. I am downloading PD3 and will try that next.
Click to expand...
Click to collapse
Update. Looks like I get the same results with PD3.

Saafir said:
Can you look on the back of your device, on the bottom and confirm it is SM-G920P please
Click to expand...
Click to collapse
Sure is .
SM-G920P.

Saafir said:
You will have to search for a guide to get this device back working on your carrier. I'm not very familiar with using unlocked devices on other carriers. I myself would take it back to the place of purchase. Perhaps someone else will jump in with better knowledge. @koop1955
Click to expand...
Click to collapse
Thanks for the advice, I bought it in Canada, I am now in Australia and not going back to Canada anytime soon.

canussie said:
And also.. thank you for your help .
Click to expand...
Click to collapse
I have never experienced this (only occurs on phones outside the US) and can't offer you a direct solution, but this person seems to have solved the same problem on the Edge model using a toolkit:
https://www.youtube.com/watch?v=HlMQQPpqELI
Hope this helps you.

U must have tried to install a custom recovery or a kernel try to drain s6 battery to 0% to do that go into odin mode let it sit and turn off automatically. .when off plug in charger..charge to about 5% first go into recovery wipe data n cache restart ur phone ...simple restarting the phone wont help ya..if this doesnt help u try installing 5.11 BOL1 stock rom...n then drain it 0% repeat the procedure
Sent from my LG-H815 using XDA-Developers mobile app

canussie said:
I bought 2 Galaxy S6 devices, unlocked by the store I bought them from. 3 days ago my wifes phone rebooted and came up with the following error:
KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock.
I tried doing the smart switch restore, but the app doesn't like my model/SN combination. I got ODIN and a Lollipop 5.11.1 firmware for my model, flashed it using the ODIN flash procedure, that was successful, once my phone power cycled it is now stuck on the SAMSUNG logo startup screen and will not boot any further, the error messages have gone away. I can get it into recovery and download mode, but not sure what else to do to fix this bootup problem. Maybe the bootloader is toast?
Click to expand...
Click to collapse
DRK no longer
---------- Post added at 09:50 PM ---------- Previous post was at 09:47 PM ----------
I bet everything you lost imei and DRK baneband and more

Hieu vn said:
DRK no longer
---------- Post added at 09:50 PM ---------- Previous post was at 09:47 PM ----------
I bet everything you lost imei and DRK baneband and more
Click to expand...
Click to collapse
Agreed

anderd said:
Agreed
Click to expand...
Click to collapse
Ok, any tips on how to restore this?

canussie said:
Ok, any tips on how to restore this?
Click to expand...
Click to collapse
Im sure there's a solution that doesn't require a box, but im not aware of it at the moment, If the IMEI/MEID is gone, you'll have to find someone who can repair that, and most claim their repairs only fix the GSM side (IMEI) and doesn't write a new clean sprint MEID to the device. In the end, it may end up being easier to replace the device and sell the current one for parts. If you only need GSM service, then im sure someone, either on here, or another forum, or a auction site, could help you for a fee. Thats all i can suggest at the moment.

mahdi72 said:
PD3 or PD2 is BuildNumber.PD2 released and after flashing that you can take PD3 from OTA Update. PD2 is based on Android 6.0.1
http://samsung-updates.com/details/65838//SM-G920P/SPR/G920PVPS3CPD2.html
Click to expand...
Click to collapse
PD2 Workedfor me thanks...

try flashing new kernel

N910P on bootloder and N910H under Battery !!!

Hello , i got a new phone Note 4 ( Sorry wrong title . it is n910F not H)
it was on kitkat 4.4.2 and it was working well so i wanted to upgrade to 6.0.1
when i go to bootloader , i saw N910P but inside firmware and under battery it is N910F
I was confused so i flashed n910F but it fails to flash so i tried n910p , it worked but i lost imei and network. i took it a repair store and he wrote a new cert file . now i got new imie but still i dont have network. if i want to search manually , it always say error
He made downgrade to 5.1.1 and make unlock via programing tools but the same.
i didnt make any back ups foe efs.
can some one help me with this?
Thanx in advance

Sobaro said:
Hello , i got a new phone Note 4
it was on kitkat 4.4.2 and it was working well so i wanted to upgrade to 6.0.1
when i go to bootloader , i saw N910P but inside firmware and under battery it is N910H
I was confused so i flashed n910h but it fails to flash so i tried n910p , it worked but i lost imei and network. i took it a repair store and he wrote a new cert file . now i got new imie but still i dont have network. if i want to search manually , it always say error
He made downgrade to 5.1.1 and make unlock via programing tools but the same.
i didnt make any back ups foe efs.
can some one help me with this?
Thanx in advance
Click to expand...
Click to collapse
You should always always backup every partition. Especially efs.
Anyhow, what service are you trying to use? GSM or CDMA?
If your using it with GSM, and If this phone is truly a sprint phone, it probably got sim locked when he fixed it. I ain't no expert but it probably needs unlocked if this is the case.
Edit: I just understood what you wrote, that he already unlocked it. Sorry for misunderstanding.
But if your using it with sprint, maybe it just needs activation updated. I don't use sprint or CDMA so I don't know a lot about that.
But main thing you need to do before anything else. Is make a full back up of your partitions. I always make backup in two.( Which is mainly all you need)
But also there are programs that (I can't remember there names,) make backups of all your hidden partitions, just in case.
I understand I didn't provide you with a definite answer to your problem but hope it can help.

aaron74 said:
You should always always backup every partition. Especially efs.
Anyhow, what service are you trying to use? GSM or CDMA?
If your using it with GSM, and If this phone is truly a sprint phone, it probably got sim locked when he fixed it. I ain't no expert but it probably needs unlocked if this is the case.
Edit: I just understood what you wrote, that he already unlocked it. Sorry for misunderstanding.
But if your using it with sprint, maybe it just needs activation updated. I don't use sprint or CDMA so I don't know a lot about that.
But main thing you need to do before anything else. Is make a full back up of your partitions. I always make backup in two.( Which is mainly all you need)
But also there are programs that (I can't remember there names,) make backups of all your hidden partitions, just in case.
I understand I didn't provide you with a definite answer to your problem but hope it can help.
Click to expand...
Click to collapse
nah, i am not using it with sprint and yes i am using GSM network.
I tried every solution available but no success .

Sobaro said:
nah, i am not using it with sprint and yes i am using GSM network.
I tried every solution available but no success .
Click to expand...
Click to collapse
Can to send me a copy of your build.prop
Edit. Are you using sprint stock ROM? What version? Are you sure it's unlocked? If yes, I might be able to help. But I have to gather some info. And get to my PC. Cause I'm testing a ROM right now and am lagging

I have faced the same problem and, managed to solve it. Here is the solution..
1. Download any kk or lp firmware of n910p. Extract the .tar file, get the ' modem.bin' and flash it using Odin. Do it twice, yes, twice. Before flashing the modem, make sure you have unchecked 'auto boot' option in Odin. To turn off the phone after the first flesh, just take off the battery.
2. Download twrp 3.0.1.0 for n910f. Yes.. TWRP recovery for N910F ( or the model specified under the battery). Flash it using Odin.
3. Download any stock based custom ROM which is based on the modem you have flashed. For example, BOB7, COG5 , COK1( these are the last 4 characters of the stock firmware/modem)
4. Flash the custom ROM using twrp, flash gasps, and smile.
If you face bootloop, just try different kernel. I'm using BOB7 modem, emotion kernel, vision x custom ROM.

z.a.shimon said:
I have faced the same problem and, managed to solve it. Here is the solution..
1. Download any kk or lp firmware of n910p. Extract the .tar file, get the ' modem.bin' and flash it using Odin. Do it twice, yes, twice. Before flashing the modem, make sure you have unchecked 'auto boot' option in Odin. To turn off the phone after the first flesh, just take off the battery.
2. Download twrp 3.0.1.0 for n910f. Yes.. TWRP recovery for N910F ( or the model specified under the battery). Flash it using Odin.
3. Download any stock based custom ROM which is based on the modem you have flashed. For example, BOB7, COG5 , COK1( these are the last 4 characters of the stock firmware/modem)
4. Flash the custom ROM using twrp, flash gasps, and smile.
If you face bootloop, just try different kernel. I'm using BOB7 modem, emotion kernel, vision x custom ROM.
Click to expand...
Click to collapse
Thank you, i will try and get back to u soon . Much appreciated !

aaron74 said:
Can to send me a copy of your build.prop
Edit. Are you using sprint stock ROM? What version? Are you sure it's unlocked? If yes, I might be able to help. But I have to gather some info. And get to my PC. Cause I'm testing a ROM right now and am lagging
Click to expand...
Click to collapse
yes i am sure phone is unlocked through Domestic Unlock ( z3x & octoplus Boxes)
also i am on Stock 5.1.1 lollipop
I think the only way u can help me is by sharing a good QCN and EFS for N910P ! (if the above solution from our friend doesnt work 4 me )
Also i am from another country so there is no harm for you if u share it with me in private.
Thanks in Advance !

Sobaro said:
yes i am sure phone is unlocked through Domestic Unlock ( z3x & octoplus Boxes)
also i am on Stock 5.1.1 lollipop
I think the only way u can help me is by sharing a good QCN and EFS for N910P ! (if the above solution from our friend doesnt work 4 me )
Also i am from another country so there is no harm for you if u share it with me in private.
Thanks in Advance !
Click to expand...
Click to collapse
Sounds like your on your way. Good luck.

z.a.shimon said:
I have faced the same problem and, managed to solve it. Here is the solution..
1. Download any kk or lp firmware of n910p. Extract the .tar file, get the ' modem.bin' and flash it using Odin. Do it twice, yes, twice. Before flashing the modem, make sure you have unchecked 'auto boot' option in Odin. To turn off the phone after the first flesh, just take off the battery.
2. Download twrp 3.0.1.0 for n910f. Yes.. TWRP recovery for N910F ( or the model specified under the battery). Flash it using Odin.
3. Download any stock based custom ROM which is based on the modem you have flashed. For example, BOB7, COG5 , COK1( these are the last 4 characters of the stock firmware/modem)
4. Flash the custom ROM using twrp, flash gasps, and smile.
If you face bootloop, just try different kernel. I'm using BOB7 modem, emotion kernel, vision x custom ROM.
Click to expand...
Click to collapse
I did exactly as u said but still dont have network. i think i messed up my efs folder .
Please any suggestions ?

Sobaro said:
I did exactly as u said but still dont have network. i think i messed up my efs folder .
Please any suggestions ?
Click to expand...
Click to collapse
Could you please check the IMEI? Is it null or "00"? Does your phone shows baseband number?

z.a.shimon said:
Could you please check the IMEI? Is it null or "00"? Does your phone shows baseband number?
Click to expand...
Click to collapse
My imei & baseband are OK
Any way i send it back to customer care , thank u very much.

same problem
i have the same problem you have i do not know what shall i do ?
please any help

did you try to flash stock sprint firmware lollipop 5.1.1?

Sobaro said:
My imei & baseband are OK
Any way i send it back to customer care , thank u very much.
Click to expand...
Click to collapse
Bro
Did you ever solved the problem?
I have a similar problem, but my phone makes emergen y calls, but will notnregiater to the network.

Can i flash my verizon note 4 from SM-N910V to SM-N910T ?

Hi,
I am having data problems with my Verizon phone that has a T-mobile sim card, is there anyway to flash my Verizon SM-910V with SM-910T ROM ?
Thanks

anass159 said:
Hi,
I am having data problems with my Verizon phone that has a T-mobile sim card, is there anyway to flash my Verizon SM-910V with SM-910T ROM ?
Thanks
Click to expand...
Click to collapse
yes you can I personally installed and it worked on my 910v , but you will only get 4g not 4glte
https://forum.xda-developers.com/no...-maximum-ovrdrive-6-0-1-mm-beta-4-13-t3358326

zfk110 said:
yes you can I personally installed and it worked on my 910v , but you will only get 4g not 4glte
https://forum.xda-developers.com/no...-maximum-ovrdrive-6-0-1-mm-beta-4-13-t3358326
Click to expand...
Click to collapse
Hi, sorry about my english, not a native speaker.
Di you know if it's possible to flash verizon ROM to my T-Mobile Note 4 ?
What I want it's use 900 Mhz frequency that my carrier use for UMTS (Cuba), and Verizon seems to enable that frequency band.
Tried to do so, with pit file from verizon and N910VVRU2CQL1_N910VVZW2CQL1_N910VVRU2CQL1_HOME.tar.
got SECURE CHECK FAIL: PIT
any ideas ? help ?

yossjackson88 said:
Hi, sorry about my english, not a native speaker.
Di you know if it's possible to flash verizon ROM to my T-Mobile Note 4 ?
What I want it's use 900 Mhz frequency that my carrier use for UMTS (Cuba), and Verizon seems to enable that frequency band.
Tried to do so, with pit file from verizon and N910VVRU2CQL1_N910VVZW2CQL1_N910VVRU2CQL1_HOME.tar.
got SECURE CHECK FAIL: PIT
any ideas ? help ?
Click to expand...
Click to collapse
Try downloading from sammobile.com
You'll have to register but it's a free download directly from samsung.

yossjackson88 said:
Hi, sorry about my english, not a native speaker.
Di you know if it's possible to flash verizon ROM to my T-Mobile Note 4 ?
What I want it's use 900 Mhz frequency that my carrier use for UMTS (Cuba), and Verizon seems to enable that frequency band.
Tried to do so, with pit file from verizon and N910VVRU2CQL1_N910VVZW2CQL1_N910VVRU2CQL1_HOME.tar.
got SECURE CHECK FAIL: PIT
any ideas ? help ?
Click to expand...
Click to collapse
I tried it too and it didn't work, I dont think you can flash whole Verizon stock firmware using odin to 910t, what you gotta do first install twrp once you get that done then flash Verizon ROM, if you could and see if that fixes your issues
if you are just looking to install baseband, modem etc then try this first to install this Partial Verizon stock firmware using odin
N910VVRU2CQL1_PartialFirmware_DevEd.tar.md5
https://forum.xda-developers.com/devdb/project/dl/?id=28233
this will update those if you can install these to your 910t then you should be fine?
also in one post you said you have 910V phone and you want 910T rom and now you are saying you got 910T phone and want to run 910V stock?? which of which you have??

zfk110 said:
I tried it too and it didn't work, I dont think you can flash whole Verizon stock firmware using odin to 910t, what you gotta do first install twrp once you get that done then flash Verizon ROM, if you could and see if that fixes your issues
if you are just looking to install baseband, modem etc then try this first to install this Partial Verizon stock firmware using odin
N910VVRU2CQL1_PartialFirmware_DevEd.tar.md5
https://forum.xda-developers.com/devdb/project/dl/?id=28233
this will update those if you can install these to your 910t then you should be fine?
also in one post you said you have 910V phone and you want 910T rom and now you are saying you got 910T phone and want to run 910V stock?? which of which you have??
Click to expand...
Click to collapse
Thanks for replying zfk110 , first yossjackson88 is a different person , second I tired to install twrp but was unable to , I have the retail version .

anass159 said:
Thanks for replying zfk110 , first yossjackson88 is a different person , second I tired to install twrp but was unable to , I have the retail version .
Click to expand...
Click to collapse
Since you have Verizon note 4 you have to unlock the bootloader first using this guide
https://forum.xda-developers.com/no...t/howto-bootloader-unlock-upgrade-to-t3398144
once you do that then you can install the TWRP, once you install TWRP then you can load that rom which I sent you earlier without any issues,but as I said follow that guide and unlock your bootloader and then go from there, if you can't do that then there is no other way you can do it

zfk110 said:
Since you have Verizon note 4 you have to unlock the bootloader first using this guide
https://forum.xda-developers.com/no...t/howto-bootloader-unlock-upgrade-to-t3398144
once you do that then you can install the TWRP, once you install TWRP then you can load that rom which I sent you earlier without any issues,but as I said follow that guide and unlock your bootloader and then go from there, if you can't do that then there is no other way you can do it
Click to expand...
Click to collapse
Thanks @zfk110 to unlock the bootload I need to root my device, I tried everything to root it but everything failed (using kingroot, kingoroot, or flashing the CF-Auto-Root with odin ).

anass159 said:
Thanks @zfk110 to unlock the bootload I need to root my device, I tried everything to root it but everything failed (using kingroot, kingoroot, or flashing the CF-Auto-Root with odin ).
Click to expand...
Click to collapse
You have to use kingoroot PC or kingoroot apk with working sim so you can enabled data to work for internet, just follow that guide thats the only way to do it, its not easy it took me one month of looking around and getting info once you do it then it become easier

zfk110 said:
You have to use kingoroot PC or kingoroot apk with working sim so you can enabled data to work for internet, just follow that guide thats the only way to do it, its not easy it took me one month of looking around and getting info once you do it then it become easier
Click to expand...
Click to collapse
Ok I will try them again right now see if they will work thanks @zfk110.

anass159 said:
Ok I will try them again right now see if they will work thanks @zfk110.
Click to expand...
Click to collapse
It did not work with both of them @zfk110 .