Unlock screen issue - AT&T Samsung Galaxy S6 Edge+

Hi guys I received this phone some days before and I am having a lie issue and is when I try to wake up the phone with the finger print pushing the button or the lateral one. The phone is in black don't wake up if I touch the buttons I feel the vibrationsame but still off the screen and after several tune it wake up normally. And all work OK. I think no is a hardware issue coz normally it works fine but some time's ..Ido no is a big problem but disturb. Ty to all
Enviado desde mi SM-G928F mediante Tapatalk

Related

N7100 lockscreen unlock issue

Hi everyone. I have problem on my phone with unlocking the screen. sometimes i cant unlock the screen because the touchscreen doesnot works. but S pen works.. it ussually becomes after 10-20 minutes phone using.. If someone has the same problem please share, and if you can helpme with this issue. Thanks. Sorry for bad English
Hi, I have the same issues. My phone does not recognize touch when it is cold. When it was in the pocket outside or facing a table. 2-3 times turning on and off the screen brings it back working.
I read an article from Sprint that there are protector foil issues with the capacitive display, but I don't have any.
Sent from my GT-N7100 using xda app-developers app
Have the same unlocking problem
outlander4000 said:
Hi, I have the same issues. My phone does not recognize touch when it is cold. When it was in the pocket outside or facing a table. 2-3 times turning on and off the screen brings it back working.
I read an article from Sprint that there are protector foil issues with the capacitive display, but I don't have any.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Hi, I guess I have the same issue. Bought the Note II a week ago, came with 4.1.1 and it automatically updated itself to 4.1.2, so don't know if this problem was present with 4.1.1
When I press the power button to lock the screen and wait about 10 minutes, the screen becomes unresponsive, no tap or swipe works. Have tried swipe, pattern, pin for unlocking, result is always the same.
Strangely, at that unresponsive state, the S-pen works and I can unlock and do other things. At that state, touching with the fingers still doesn't work.
The only way to return the screen back to normal is, press the power button again (sometimes need to press the power button twice).
Have done factory reset, the problem is still there with both Sim card and SD card removed.
Has any one found a solution, is this related with 4.1.2 upgrade or a hardware fault ?
Thx in advance,
Regards
I have sent mine for repair. It is a pity that Samsung does not do an exchange.
It is a hardware fault for sure. I made a video to demonstrate the behaviour.
Search on YouTube for video y9rLmuyih8E

[Q] Screen problem

Hello,
My friend have a Sony Xperia S and reciently it been serviced because microphone was not working just after a month of using it, but its been fixed and fine, but it taken them 2 weeks to fix it! But now when the phone in portrait mode will not register touch on the notification bar and in the Screen test the yellow line does not get to the top of the screen when you move finger across, but in landscape mode the i can get to the notification bar. So ether digitizer is broken or the screen is need re-calibration but i dont know how to do recalibration. Can some one give me advice WITHOUT taking it again to the Sony Service Center.
Thank you
Hold the screen lock button, and the volume down button for around 10 seconds. Basically resets the hardware. Hope this helps you.
pharix said:
Hold the screen lock button, and the volume down button for around 10 seconds. Basically resets the hardware. Hope this helps you.
Click to expand...
Click to collapse
FYI : You can't reset hardware...
Sent from my LT28h using xda premium
Same problem here
Hi there,
as I am facing the same problem with my Xperia S.
However it's my fault as I opened the device, loosened and tightened all screws on the back.
Unfortunately, I even flashed ROM and Kernel before and was running into some problems, so I wanted to take the battery out for a moment...
Any solutions so far execpt buying a screen replacement?

Vibration and feedback

Hi guys I kept having a problem on my xperia s recently where sometimes the vibration and haptic feedback on the soft buttons and keyboard stop working. At that time I was rooted on stock .96 firmware.
So yesterday I decided to reflash using SUS. Set everything back to how I had it. However I'm still receiving the same problem. Sometimes vibration stops when the phone rings or when I type or press the home and back buttons. Then sometimes it starts itself. If I reboot it doesn't help. Sometimes doesn't even vibrate when I press the power button to turn the phone on.
Any suggestions?
Thanks in advance
Sent from my Nexus 7 using Tapatalk 4
rkanwar said:
Hi guys I kept having a problem on my xperia s recently where sometimes the vibration and haptic feedback on the soft buttons and keyboard stop working. At that time I was rooted on stock .96 firmware.
So yesterday I decided to reflash using SUS. Set everything back to how I had it. However I'm still receiving the same problem. Sometimes vibration stops when the phone rings or when I type or press the home and back buttons. Then sometimes it starts itself. If I reboot it doesn't help. Sometimes doesn't even vibrate when I press the power button to turn the phone on.
Any suggestions?
Thanks in advance
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Might be hardware problem. ..Check if your vibration is correct using this keycode : *#*#0842#*#*
Hi I have tried your suggestion and it works fine when I do a service test.
Correction: only works sometimes.
Should I buy a new vibration module?
Sent from my LT26i using Tapatalk
rkanwar said:
Hi I have tried your suggestion and it works fine when I do a service test.
Correction: only works sometimes.
Should I buy a new vibration module?
Sent from my LT26i using Tapatalk
Click to expand...
Click to collapse
yep...better get it checked to a sony center and see what they have to say
Well I have no warranty left and can't afford the repair cost. I used to work in a mobile phone store myself so I know what I'm doing just haven't had the chance to open up the phone. So I'll try and flash it again and see what happens. After that I'll open up and inspect the handset. I've order the vibration module just in case but I'm gonna have to live with the phone like this for a while due to the holiday period
Sent from my LT26i using Tapatalk

Enter "Theater mode" with hardware button

Maybe already known...
When you press the metal side button 2 times, the watch enters "Theater Mode" [emoji2]
And 2 times to turn it back off..
AW 5.0.1
Send with Tapatalk on Sony Z2
Nice hint!
But in my case it happens after 3 touches!
Thx that's working perfectly !
Good to know, thanks
djgodlike said:
Maybe already known...
When you press the metal side button 2 times, the watch enters "Theater Mode" [emoji2]
And 2 times to turn it back off..
AW 5.0.1
Send with Tapatalk on Sony Z2
Click to expand...
Click to collapse
Great hint. Thanks for posting.
wohoho nice trick
Awesome
Sent from my HTC One_M8 using Tapatalk
I tap twice insteed of 3...

Internal memory full -> screen off

Hi. My wife's P6 was having internal memory full messages, which she ignored. Suddenly, phone rebooted itself and it seems to be working on the background since it sounds when it receives whatsapp messages, but screen is off. It doesn't respond to any button and screen doesn't respond.
How can I hard reboot it? (With keys)? I don't want to hard reset it unless there's no other option.
Enviado desde mi P6-U06 mediante Tapatalk
Nevermind, it was the lock button. Seems to be jammed, it doesn't work since last auto reboot. Screen was on again after connecting a cable, and now it's her unlock procedure: plugin in a cable :/
I want to rule out hardware failure rebooting, but I can't do it since lock button is not working. Any workaround?
There isnt really a workaround for the power/lock button. If it stopped working its best that you go and get it fixed.
Sent from my SM-G850F

Categories

Resources