My tablet when on auto brightness becomes very dark in unlit rooms and I can barely see it videos or detail.
Sent from my GT-N5110 using Tapatalk
Mod to adjust auto brightness
6Flip9 said:
My tablet when on auto brightness becomes very dark in unlit rooms and I can barely see it videos or detail.
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
I am not sure if this works with stock roms, but if you install PhilZ touch recovery from the thread... http://forum.xda-developers.com/showthread.php?t=2367151
You have options in the advanced menu to change the response time for auto brightness. The default is 1 minute, you will need to tap about 4 times to get it down to 0, as it counts up to 5.
Which sped up the delay from going from one extreme to the other in ambient lighting.
If you install his custom roms you also get options to adjust the brightness intensity in 5 steps while auto brightness is on. I found this out after some time messing with my settings.
6Flip9 said:
My tablet when on auto brightness becomes very dark in unlit rooms and I can barely see it videos or detail.
Click to expand...
Click to collapse
Lux Auto Brightness - perfect app for brightness tuning - you can set you own profile - matching desired screen brightness to sensor reading, and the process is very easy.
Short info, taken from app description:
Lux isn't your ordinary brightness app. It intelligently adjusts the brightness of your display based on the environment you're in. If, for example, you step into a dimly lit room, Lux will automatically lower the brightness of your display to make it not only comfortable to read, but to also preserve battery power.
Lux provides the option to automatically adjust the backlight at fixed intervals (periodic mode), when a change in environment is detected (dynamic mode), or when the phone wakes from sleep. It's also possible to adjust the backlight manually. Simply disable automatic mode and you can use it like a traditional brightness tool!
Perhaps the best thing about Lux is that you can teach it how to behave. If the backlight is too bright or dim for your liking, simply open the provided Dashboard, adjust the brightness slider to the level you desire, then hold the link button. Lux will use this new 'link' as a reference in future.
lux and velis both work. i paid for both, but i prefer lux.
I set my watch to use auto brightness. In a dark location, like movie theater or dark room, the auto brightness is not working properly:
- when I receive notification, the watch screen turned on at the full brightness. After about 2 seconds, then it either turn off the screen or the brightness reduced.
- when I wake up the watch manually, same thing happen.
Anyone experiencing this?
I usually see the opposite, where in a dark room, it comes on so dim that I can 't even see it, then brightens after a couple seconds. However, your general point is right on... the auto-brightness definitely needs some improvement.
Hmmm...That's interesting.
Really tick me off when I just woke up and the bright screen blast my eye. I am using the watch with sleep android app, but I think I'll forgo that.
Auto brightness in dark situation for me is terrible. It is even dime than level 1 brightness. I can only see time, but can not read notification clearly. I change to level 1 setting, it is great. And save lots of battery as well.
Moto 360 Brightness
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
Under display settings, there's this "Auto Adjust Screen Tone" that confuses me. Looking for the explanation as for what it does, I found it supposedly plays with the screen brightness based on the on-screen image, but it's very vague. What's the point of having both this and auto brightness? How do they work together?
Setting it on and off shows absolutely no difference. Does it really save battery at all?
Doesnt really do much for me either. I think its for a better accurate brightness level when you turn on auto brightness. When you turn on auto brightness and the adjust screen tone I think that would mean that the auto brightness would adjust its brightness by the sensor next to the front camera and the auto adjust screen tone would adjust to the image being displayed makeing the brightness best for the envrioment your in(how much light is in your room). Lets say your in a dark room and your trying to veiw a dark image, so the screen would get brighter even if the sensor is saying "theres no light here" based on the screens image. Thats my guess and someone correct me if im wrong. Idk if it saves battery but I just adjust my screen brightness manually.
It should actually be an attempt to match the color temperature of the screen to your environment. For example if you're outside it'll shift everything more blue (around 5,500 degrees kelvin) than if you're indoors with a "warm white" lamp lighting the room (closer to 3,200 kelvin). All this in an attempt to make colors appear more accurate wherever you are. It's safe to assume it uses the camera to read the colors of your environment, I'm pretty sure the light level sensor only measures luminance (brightness). Hope this helps.
Sent from my SM-T800 using XDA Free mobile app
^^^ that's what you'd think from the name, but if you read the description it says adjust display brightness based on image on screen to save battery. So I think for example if you have a mostly white screen it'll reduce the brightness. If done right, you won't notice it because it'll still look plenty bright.
Has nothing to do with temperature. I wish there were a feature for that.
I'd try it for a while to see how it feels. Probably a good feature.
With most Android Wear watches lacking an ambient light sensor, this Huawei one included, I'm wondering if you often have to manually adjust brightness, either not to be blinded at night, or to actually see the screen in daylight.
As far as I understand, an awake watch will get brighter, and ambient mode will be darker. There's also the double and triple crown clicks for theater (screen off) and sunlight (brighter) modes. And things like Display Brightness for Wear, or through AutoWear for finer grained and somewhat automated results.
And that's what I'm really wondering: if I can get a satisfying custom behaviour through AutoWear, by slices of day time (eg, brightest at noon, and progressively darker as night approaches), that'd be fine enough to me. But if I constantly have to adjust things manually, I fear that would quickly become annoying (I can spend a lot of energy tweaking automation to ensure I can be as lazy as can be afterwards ).
Do you choose a middle ground brightness setting and are fine with it most of the time, except when you rarely have to double or triple crown click? Do you find yourself manually adjusting brightness a few times a day? Do you constantly fiddle with brightness settings?
I don't touch it at all. I have it set to 4 and could even get away with 3 if I want. When you need a brightness boost just hit the crown three times and you're set.
I missed it greatly from my urbane, so I went back to it.
suzook said:
I missed it greatly from my urbane, so I went back to it.
Click to expand...
Click to collapse
Uh? Missed what? The Urbane has no ambient light sensor either, does it?
noraef said:
Uh? Missed what? The Urbane has no ambient light sensor either, does it?
Click to expand...
Click to collapse
UH! Yeah it does! Its by the lugs.
suzook said:
by the lugs
Click to expand...
Click to collapse
You're speaking of the two holes for the mic? Anyway, I'm not intested in the Urbane at all, so it's completely off topic.
What I'm interested in is how often do people with the Huawei watch feel the need to manually change brightness settings.
Crown
So, by hitting the crown three times, the brightness goes up one level?
Also, is the crown button function behavior customizable?
Thanks!
atoy74 said:
I don't touch it at all. I have it set to 4 and could even get away with 3 if I want. When you need a brightness boost just hit the crown three times and you're set.
Click to expand...
Click to collapse
gaikokujin said:
So, by hitting the crown three times, the brightness goes up one level?
Also, is the crown button function behavior customizable?
Thanks!
Click to expand...
Click to collapse
It actually goes to max brightness only until the screen goes back to sleep.
Sent from my SM-T810 using Tapatalk
atoy74 said:
It actually goes to max brightness only until the screen goes back to sleep.
Sent from my SM-T810 using Tapatalk
Click to expand...
Click to collapse
I see, thanks.
I don't change it often at all. Most of the time 2 or 3 has been plenty bright for me, and the triple click to up it a bit works pretty well...
noraef said:
You're speaking of the two holes for the mic? Anyway, I'm not intested in the Urbane at all, so it's completely off topic.
What I'm interested in is how often do people with the Huawei watch feel the need to manually change brightness settings.
Click to expand...
Click to collapse
Have the watch since tuesday ("Active", ie black, with single layer leather) And I agree: most of the time, 2 or 3 are enough. 1 is actually even too bright to me at night, especially since I'm seemingly unable to have ambient brightness get as low as how bright it is awake at 1 (is ambient brightness level fixed?).
Under direct sunlight, it's not always that easy to see even with the bright 3-click sunlight mode. But generally, twisting my wrist a little to avoid direct reflections, or at worst covering it a bit with my other hand, is enough.
noraef said:
Have the watch since tuesday ("Active", ie black, with single layer leather) And I agree: most of the time, 2 or 3 are enough. 1 is actually even too bright to me at night, especially since I'm seemingly unable to have ambient brightness get as low as how bright it is awake at 1 (is ambient brightness level fixed?).
Click to expand...
Click to collapse
Ambient mode brightness is not configurable on the watch, but certain 3rd-party watchfaces offer this setting. I'm using Skymaster and it offers different brightness for ambient mode.
agentdr8 said:
Ambient mode brightness is not configurable on the watch, but certain 3rd-party watchfaces offer this setting. I'm using Skymaster and it offers different brightness for ambient mode.
Click to expand...
Click to collapse
Does that setting only apply to the actual watch face, or to the whole display? I've managed to make it dimmer with a partially transparent black layer in WatchMaker, but it doesn't apply to cards previews, or icons such as mute...
SWapp True Dark allows for actually adjusting the brightness of the whole ambient display, which is already great, but I'd rather have that manageable through Tasker (to have it auto adjust by time of the day). Have asked João if this could be implemented in AutoWear, so maybe it'll end up manageable through that.
Seems quite crazy to me this setting is not available by default. Reminds me, even though I think Android is the best OS of its kind, how lame I find it without the truckload of customization I lay over it...
I have 8 days ago my Huawei SW. It's my first SmartWatch and I'm really disappointed not to do anything with Tasker and Android Wear to adjust brightness to my liking clock automatically.
On the day I need more brightness when I'm out and at night the minimum brightness of the screen saver is very strong.
The bothers me most at the moment is so intense brightness of screen saver at night. No achievement make it more tenuous. Anyone know if there is any app that you can do?
Hopefully one of the experts and boys of this site something to be developed further manipulate Androi tasker and wear.
I've been using Display Brightness for Wear. It allows for different brightness settings for day and night in different situations. I wish it was more customizable or there were some ways to control brightness with tasker. Unfortunately, I've been unable to find those.
Autowear just needs to be able to receive a message that ambient is selected. It thinks the watch is off instead of in ambient. Frankly, though, SWapp does what I need. I also use WatchMaker faces and customize the dim mode to my liking.
i use Wear Mini Launcher and have it set to show the widgets before the apps, so one swipe to the right gets me a brightness slider. Its very each to adjust this way. With Wear Mini Launcher I can also quickly set my phone to silent/vibrate mode, turn on flashlight, ping the phone even if the phone is on vibrate, etc
brizey said:
Autowear just needs to be able to receive a message that ambient is selected. It thinks the watch is off instead of in ambient. Frankly, though, SWapp does what I need. I also use WatchMaker faces and customize the dim mode to my liking.
Click to expand...
Click to collapse
I {o] [URL]v I they're t5ttpp[emoji12] rr[/URL]way oo{o[oooooo] 599d55t
maximus96 said:
i use Wear Mini Launcher and have it set to show the widgets before the apps, so one swipe to the right gets me a brightness slider. Its very each to adjust this way. With Wear Mini Launcher I can also quickly set my phone to silent/vibrate mode, turn on flashlight, ping the phone even if the phone is on vibrate, etc
Click to expand...
Click to collapse
atoy74 said:
I don't touch it at all. I have it set to 4 and could even get away with 3 if I want. When you need a brightness boost just hit the crown three times and you're set.
Click to expand...
Click to collapse
wait...WAT?! i've never known this...btw it doesn't work with Android Wear 2.0 preview 2
I've thought of something somewhat cool but I'm no developer.
What if we can use our cellphone's ambient light sensor to sync with the watch so that the watch can get both bright and/or dim when needed?
Theoretically this will function correctly if your phone isn't in your pocket all the time.
Sent from my SM-G935T using XDA-Developers mobile app
I've seen a couple posts about delays with adaptive brightness, but this is a different item. I'm seeing that the adaptive brightness alters the brightness a little too dramatically. In a somewhat dark room (not pitch black) the brightness will be at absolute minimum even when the brightness is about 1/3 up on the slider. In a moderately bright room that same brightness setting will be near maximum.
Does anyone else notice this as an issue? I'm just wondering if it's normal (ie, software calibration issue) or if the brightness sensor might not be seated correctly.
It's normal. Or at least it sounds like it is working the same way mine is. And yes, IMO it is a little too sensitive. The Lux app works beautifully if you want an alternative. Also, the goog is known for tweaking this feature over time with updates.
I've noticed this too. The biggest thing for me is walking down the street at dusk (so not dark out yet) I can't read the screen as it turns it all the way down, then, when I walk under a street light, it turns it all the way up to full! It's one extreme or the other, there seems to be no middle ground.
In other words "adaptive brightness has mind of its own!"
This is why I have always kept this setting off. The brightness just changing on its own always annoyed me.
When it works properly (and it should) for ones uses, it's great, it's automatic, what's not to like? It's a pita to always have to change brightness manually just to see a phone display depending on ambient lighting which varies immensely for many users.
jbdan said:
When it works properly (and it should) for ones uses, it's great, it's automatic, what's not to like? It's a pita to always have to change brightness manually just to see a phone display depending on ambient lighting which varies immensely for many users.
Click to expand...
Click to collapse
I agree. I have it set to maybe around 15-20% (centered over the WiFi symbol below it) and I never need to touch it. Gets dark enough for night driving and bright enough to read outside. Never found it stuck on one or the other when it shouldn't be.
Sent from my Nexus 5X using Tapatalk
If you buy the app Lux you can customize how it adapts your brightness. The free version is good to but you have to use mostly default settings. By default it only adapts brightness when the screen turns on.