Develop Bugs

[OTHER FORUMS] Roms, Apps and Tutorials for the HAM

By far the best forum is 4pda. A big thanks to forum member acbka aka asyan4ik
1. Eloquent
2. Phandroid
3. HTC Mania
4. Droid Sans
5. Android Hilfe
6. Frandroid
7. 4pda.ru MATE
Shendu and also for the P6
MIUI
LEWA OS
News
Unlock Codes

uppon2 said:
By far the best forum is Eloquent. Keep an eye on these 2 users 'fte9k' and 'kangvip' - I did try one of the roms out but it was all Chinese. I kept getting a constant system force close at the startup procedure sent in to bootloop. Be very careful when trying the non english roms! I do not want to hear anybody blaming me for a bricked phone.
1. Eloquent
2. Phandroid
3. HTC Mania
4. Droid Sans
5. Android Hilfe
6. Frandroid
7. MIUI
8. Unlock Codes
9. News
Click to expand...
Click to collapse
You can add a Russian forum 4pda.ru MATE

acbka said:
You can add a Russian forum 4pda.ru MATE
Click to expand...
Click to collapse
Added

I am about to try LEWA OS. I have always wanted to give this a shot but it was never available on any of my devices. I will report back
*EDIT* Look below for details

uppon2 said:
I am about to try LEWA OS. I have always wanted to give this a shot but it was never available on any of my devices. I will report back
*EDIT* I have changed my mind. I have taken a long time to setup my phone to be the way it is now and don't want to risk having to flash stock firmware again in order to fix a soft bricked phone, not that it usually worries me, it's just annoying trying to get everything perfect again (I don't rely on nandroid backups as even they aren't perfect_
Click to expand...
Click to collapse
you are wrong, backup through twrp 2.6.3.3 works perfectly! Before Recover to do
wipe - advanced wipe
-Wipe dalvik cache
-System
-Cache
-Custom Storage
-Date
restore you buckup -
reboot -
i restore stock b907 / pac man rom / my port fly ui (cm 10.1 joe.stone)
:good:

acbka said:
you are wrong, backup through twrp 2.6.3.3 works perfectly! Before Recover to do
wipe - advanced wipe
-Wipe dalvik cache
-System
-Cache
-Custom Storage
-Date
restore you buckup -
reboot -
i restore stock b907 / pac man rom / my port fly ui (cm 10.1 joe.stone)
:good:
Click to expand...
Click to collapse
I have been doing this for many years. I have goten to points of soft bricking where recovery is impossible to get in to and where I needed to enter download/bootloader modes. The only way to restore a nandroid is if I have backed it up to my computer beforehand, flashed a firmware in download/bootloader mode then re-root/unlock and flash a recovery again, transfer the nandroid to my device and hope the data has not been corrupted during the process between phone and computer. I have actually needed to do this several times and more than once the nandroid was not restorable.

MIUI V5
http://rom.miui.com/en/download/view/id/359370#top

I ended up flashing LEWA OS. Very fast and everything seems to be working fine for me. GPS is working better for me now than on stock, camera and HDR mode are great, speed is good. Wifi and Data is working flawlessly. Beautiful lockscreen and UI. All of the theming options seem to be working as well (for those familiar with MIUI etc.) The rom has a lot of visual tweaking and you can even kill the current running app by long pressing the back button *note* it does work, you just need to hold it for longer. You can also swipe in between the notifications and the switches tabs anywhere on the screen
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed the rom again. Step 1. Copy the LEWA rom zip and Gapps to your phone, then reboot in to recovery. 2. In TWRP; do an advanced wipe "cache, dalv, system, data" and then go to install and find the rom and install it. 3. reboot and make sure the rom loads all the way (do not bother setting up google account yet), once this happens reboot in to recovery again by holding power button and selecting reboot>recovery (inside of the rom this option is available), once you are there please install Gapps with TWRP, then reboot and enjoy.
Screenshots
Lockscreen Screenshots
Video showing off the rom (all of these features work on HAM)

uppon2 said:
I ended up flashing LEWA OS. Very fast and everything seems to be working fine for me, the only issue so far is I can not scroll left or right to select lockscreen shortcuts, I can only slide it down to unlock. Camera and HDR mode are great, speed is good. Wifi and Data is working flawlessly. Beautiful lockscreen and UI. All of the theming options seem to be working as well (for those familiar with MIUI etc.)
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracted the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time.
Click to expand...
Click to collapse
Hi, You can put some screenshots of the ROM??
thanks.

elroysk said:
http://rom.miui.com/en/download/view/id/359370#top
Click to expand...
Click to collapse
Because of P6?
This ROM is 100% compatible with Mate?

I have not tried.

ErSergi said:
Hi, You can put some screenshots of the ROM??
thanks.
Click to expand...
Click to collapse
Here are some screen shots. (The navigation keys are like that by choice, remember I am using the Australian model so I only have 1gb of ram )

Some of the lockscreen which is actually live (I am using the BigBang theme)

elroysk said:
http://rom.miui.com/en/download/view/id/359370#top
Click to expand...
Click to collapse
hasbrone said:
Because of P6?
This ROM is 100% compatible with Mate?
Click to expand...
Click to collapse
If you look in the first post of my thread, you will see that MIUI is already listed but from a different download area and from a different author. If you scroll down you will actually find the file for Ascend Mate. I will tell you now though, the file name is the same as the P6 so I am assuming it is the same or they have used the P6 file and tweaked it. I am going to look at both files and give it a shot at running them today.
This is the file provided under the Huawei Ascend Mate

uppon2 said:
If you look in the first post of my thread, you will see that MIUI is already listed but from a different download area and from a different author. If you scroll down you will actually find the file for Ascend Mate. I will tell you now though, the file name is the same as the P6 so I am assuming it is the same or they have used the P6 file and tweaked it. I am going to look at both files and give it a shot at running them today.
This is the file provided under the Huawei Ascend Mate
Click to expand...
Click to collapse
I already installed this rom and it looks neat..
before you install make sure u replace the boot.img with ascend mates boot.img file. the one in the zip file is for P6.

Hi uppon2 , Hd video playback youtube in this ROM? works?
You can put the link in the forum, where you downloaded this ROM Lewa Os.
thanks!

I downloaded d zip...how to flash it
Sent from my HUAWEI MT1-U06

ErSergi said:
Hi uppon2 , Hd video playback youtube in this ROM? works?
You can put the link in the forum, where you downloaded this ROM Lewa Os.
thanks!
Click to expand...
Click to collapse
HD Playback is working fine for me with Youtube. You can get the file from the first post or follow my instructions below
shaun100689 said:
I downloaded d zip...how to flash it
Sent from my HUAWEI MT1-U06
Click to expand...
Click to collapse
I have already given instructions on how to flash the file and I will post them again.
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracting the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time. I then installed Gapps after being certain that the rom would load

So is it necessity to unlock boot loader...?
Sent from my HUAWEI MT1-U06

Uppon2 , https://disk.yandex.com/public/?hash=UG0GbIYB6yTozqYOQtxz5U5g0Bf7ymAIfTr3ZqQyjg8=
I downloaded this ROM and no. bat file in order to install ...
as installed?
this link is correct, because I see this. bat file to install??
I think these instructions are not in this rom?????
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracting the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time. I then installed Gapps after being certain that the rom would load

[ROM][Custom][Privacy Guard][Leds][UB LB][Aroma] D5503_14.4.A.0.157_latest

Hi, latest S.o.n.y 14.4.A.0.157 rom for you!
Rom is in complete - mean: rooted, have Superuser|SuperSu, su, busybox, cwm recovery, deodexed, zipaligned...etc, just install propertly and enjoy rom! Please don't install any external mod in order to report here if something isn't working (do it silent and on your own risk! It will probably broke your rom and make rom malfunction!).
Rom allso have included ntfs support (to mount your ntfs drive, run command using terminal emulator "ntfsmount mount" to mount your drive or "ntfsmount umount" to umount your drive (note about ntfs: do not use settings menu to mount/umount your ntfs drive since ntfs is not supported by any rom by default, so you can't see ntfs volume mount status inside settings menu since android not supporting ntfs, but your ntfs is fully mounted and have fully read/write support, just use any file explorer to manage your ntfs volume data!). Allso do not forget to umount your ntfs volume at finish when you finish menaging your ntfs volume data!
Rom allso contain support for usbserial and ftdi based usb card readers.
For best experience I have compiled Lionheart cpu governor, you can use them in combination with row iosched to get very smooth ui and very good baterery life for daily usage!
4k is not working and allso I not going to get them working!(I have removed 4k from camera widget). I sugest you to not use any external camera mod since our one is totaly stock based and I have not replaced anything related to stock camera, every camera part is carefully patched, so if you want any camera mod than do not go here to report something which probably will not work after your replace or you get battery drain fast after replace! Allso if you have installed something which not comming from our rom than allso please do not report anything! Everything is tested and everything working very good!
How to install:
first of all you must have your phone updated oficialy to the latest bootloader, baseband... etc (thats needed!) before you gona install our rom! You no need to be bootloader unlocked since rom is for booth locked and unlocked bootloader! So first step is: using flashtool install D5503_14.4.A.0.157_Generic_nosystem.ftf -> https://mega.co.nz/#!5EAH0R6A!z236qDTdRkk_FgyG-TiD_WjukErpVA5lijR3OiHa3M0
Click to expand...
Click to collapse
than install rom D5503_14.4.A.0.157.zip -> https://mega.nz/#!EFhAXBZI!EFp1rzRPmBQlbzWlaMHphKlH6rzKNgIPB63owrH1TKg
Click to expand...
Click to collapse
All old rom data will be deleted (this will not afect your internal storage data)! Please do not perform backup restore, instead of restoring backups please install your faworite applications trought android market!
Install D5503_14.4.A.0.157_Update.3.zip from attachment (all previous updates not needed!)
Click to expand...
Click to collapse
If somebody have problems installing rom (error 7 during installation):
- You need working recovery (one which propertly detect ro.product.device). If this not help you than try to remove first line of the updater-script (assert line).
assert(getprop("ro.product.device") == "amami" || getprop("ro.build.product") == "amami" ||
getprop("ro.product.device") == "D5503" || getprop("ro.build.product") == "D5503");
Click to expand...
Click to collapse
Screenshoots:

Where is the file?

Nice!!
I've been using your v108 for 2 months now and its stable.
I'm looking forward for this!!
Thanks in advance!!
Edit: Wait, I just wanna ask this but, since I will be coming from your 108 version... Do I just flash this after wiping cache and dalvik? or do I do a full wipe?

My guess is you should also wipe system, but can leave data unwiped. Also when you are flashing the original ROM with flashtool , you can leave out wiping data.
Best regards, maris

Download links is ready, happy gaming!

Just to let you know, all old data will be removed trought aroma so please do not perform backups restores from old roms since our new rom require clean installation! Old data removal will not wipe your internal sdcard or external sdcard, it will wipe only old rom data! I have included installation choice for superuser or supersu, choice for ad blocking, debloating...etc so carefully select installation things for your needs! Enjoy new rom!

recovery included
Hi munjeni,
thanks for keeping our device up to date.
Just to be sure: The D5503_14.4.A.0.157_Generic_nosystem.ftf contains a recovery, yes? After flashing this, I can enter that recovery and flash the big zip.
Or do I need to mess around with some other recovery install first?
Sorry, if this is stupid.

Patrick-Mav said:
Hi munjeni,
thanks for keeping our device up to date.
Just to be sure: The D5503_14.4.A.0.157_Generic_nosystem.ftf contains a recovery, yes? After flashing this, I can enter that recovery and flash the big zip.
Or do I need to mess around with some other recovery install first?
Sorry, if this is stupid.
Click to expand...
Click to collapse
No! It contain: baseband, partition layout, bootbundle, kernel, fota kernel, elabel. Nothing more! You need to install recovery before you gona itstall ftf and after than to install new rom! First you must have working recovery! If you are on old rom you can use my newroot tool for rooting your phone and for getting recovery (tool will install confirmed working recovery)! But chech first if you can enter into recovery before you proced to installing things from our thread!

munjeni said:
No! It contain: baseband, partition layout, bootbundle, kernel, fota kernel, elabel. Nothing more!
Click to expand...
Click to collapse
Ok, cool. I do have a working recovery currently. I am afraid, that flashing the _nosystem.ftf will remove this recovery. Does it not?
Thanks again.

Patrick-Mav said:
Ok, cool. I do have a working recovery currently. I am afraid, that flashing the _nosystem.ftf will remove this recovery. Does it not?
Thanks again.
Click to expand...
Click to collapse
In short:
To install this rom you need to have latesr stock fw and root and recovery aftert that just download zip file from this thread and install via recovery and thats all

Patrick-Mav said:
Ok, cool. I do have a working recovery currently. I am afraid, that flashing the _nosystem.ftf will remove this recovery. Does it not?
Thanks again.
Click to expand...
Click to collapse
No, it will not remove your recovery! But if you comming from 14.2.A.XXXX it will broke recovery since partition layout is diferent than kitkat so it will broke your system partition! If you comming from 4.4.4 its safe than! If you are afraid you can update oficialy to the latest oficial firmware, than reflash only boot but use boot from 14.4.A.0.108, than use newroot tool for rooting/cwm, than reboot to recovery and flash new rom.

Will restoring only some app's data cause problem?
which means re-install the app from Google playstore and restore the data using titanium backup.
I don't feel wanna lost my game progress:crying:

alex88510 said:
Will restoring only some app's data cause problem?
which means re-install the app from Google playstore and restore the data using titanium backup.
I don't feel wanna lost my game progress:crying:
Click to expand...
Click to collapse
Probably restoring data will not break anything except your right to report issues. I fully understand why @munjeni wants full reinstallation of the apps because some apps cause issues as well as restore. Especially restoring between stock and cm/aosp.

Exactly!

alex88510 said:
Will restoring only some app's data cause problem?
which means re-install the app from Google playstore and restore the data using titanium backup.
I don't feel wanna lost my game progress:crying:
Click to expand...
Click to collapse
You can of course but probably you will not be satisfied with rom! At least you can try, if you notice problems it will be problems related to restored apks! In these situation please do not report here anything not working!

Rom is working great. No issues except for one random reboot. Everything is flying in this phone. Battery seems to be great. Thanks for this masterpeace again.
Enviado desde mi iPad con Tapatalk

as always excellent make brother

@munjeni
Do you think about release any black theme to your rom?

Rome_ said:
@munjeni
Do you think about release any black theme to your rom?
Click to expand...
Click to collapse
Hmm interesting! Maybe!

munjeni said:
Hmm interesting! Maybe!
Click to expand...
Click to collapse
Please

[Q] Bad data Corruption / " all apps force closing irrespetive of rom in my HTC ONE X

[Q] Bad data Corruption / " all apps force closing irrespetive of rom in my HTC ONE X
I have seen this video in YouTube :- Android Root 101 - How to Fix Android Smartphone with Bootloop/Brick!
In this video its mention about Bad data corruption in the system...
I have Htc One X--endeavour with S-on and i am experiencing the same problem. I tried many things like
1. super wipe / awesome super wipe
2. n cannot restore cmw- stock rom backup
it gives error :- Md5 mismatch
3. formatting/erasing/ with cmw/ twrp and also with fastboot ...
4. Info:- till now i have tried Rom's- cm 10.2.1 . cm 11 , Beanstalk Rom , Android Revolution HD 33.1 , Viper 4.1.1 and also cm 12 (unofficial ) and also tired to install cwm - stock Rom Backup -----same problem force closing all apps and then in bootloop( while restarting)
5. also tried to clear cache, dalvik cache, and also tried to clear cache from going in settings--app-- concern app with force closing issues
but still not result ....
6. And now my phone is not installing any rom at all , it just restart the phone in between the installation of any Rom...
7. i also tried to sideload zip file but unsuccessful ----adb sideload:- error more than one device and emulator.
.... now i don't know what to do
Sorry for my english....
Please help....

Patel23 said:
I have seen this video in YouTube :- Android Root 101 - How to Fix Android Smartphone with Bootloop/Brick!
In this video its mention about Bad data corruption in the system...
I have Htc One X--endeavour with S-on and i am experiencing the same problem. I tried many this like
1. super wipe / awesome super wipe
2. n cannot restore cmw- stoke rom backup
it gives error :- Md5 mismatch
3. formatting/erasing/ with cmw/ twrp and also with fastboot ...
4. Info:- till now i have tried Rom's- cm 10.2.1 . cm 11 , Beanstalk Rom , Android Revolution HD 33.1 , Viper 4.1.1 and also cm 12 (unofficial ) and also tired to install cwm - stock Rom Backup -----same problem force closing all apps and then in bootloop( while restarting)
5. also tried to clear cache, dalvik cache, and also tried to clear cache from going in settings--app-- concern app with force closing issues
but still not result ....
6. And now my phone is not installing any tom at all , it just restart the phone in between the installation of any Rom...
7. i also tried to sideload zip file but unsuccessful ----adb sideload:- error more than one device and emulator.
.... now i don't know what to do
Please help....
Click to expand...
Click to collapse
see : [FAQ] - Frequently Asked Questions - [WIP]
and [HOW TO] Unlock bootloader, Root, Flash Custom ROM, Flash Kernel And More!
This thread will be moved to One X Q&A, Help & Troubleshooting

I Missed the (Endeavoru) part should have been moved to
One X Q&A, Help & Troubleshooting

Patel23 said:
I have seen this video in YouTube :- Android Root 101 - How to Fix Android Smartphone with Bootloop/Brick!
In this video its mention about Bad data corruption in the system...
I have Htc One X--endeavour with S-on and i am experiencing the same problem. I tried many things like
1. super wipe / awesome super wipe
2. n cannot restore cmw- stock rom backup
it gives error :- Md5 mismatch
3. formatting/erasing/ with cmw/ twrp and also with fastboot ...
4. Info:- till now i have tried Rom's- cm 10.2.1 . cm 11 , Beanstalk Rom , Android Revolution HD 33.1 , Viper 4.1.1 and also cm 12 (unofficial ) and also tired to install cwm - stock Rom Backup -----same problem force closing all apps and then in bootloop( while restarting)
5. also tried to clear cache, dalvik cache, and also tried to clear cache from going in settings--app-- concern app with force closing issues
but still not result ....
6. And now my phone is not installing any rom at all , it just restart the phone in between the installation of any Rom...
7. i also tried to sideload zip file but unsuccessful ----adb sideload:- error more than one device and emulator.
.... now i don't know what to do
Sorry for my english....
Please help....
Click to expand...
Click to collapse
Flash the latest TWRP for the BIG Layout there the data partition is not used, flash the TWRP2.8.5 then format your sd card as ex4 then mount sd card and test some LP roms Or here you can download some Sense5 roms converted for the new layout
here you can read all about new layout and download all you need

Thant said:
Flash the latest TWRP for the BIG Layout there the data partition is not used, flash the TWRP2.8.5 then format your sd card as ex4 then mount sd card and test some LP roms Or here you can download some Sense5 roms converted for the new layout
here you can read all about new layout and download all you need
Click to expand...
Click to collapse
Hey ,
Thanks for the reply, I also tried this New Layout with Rom's Like :- CM 12 (unofficial) and CRdroid -CM12 ( official ) but still this same force closing problem and i also tried all different ways of solving this force closing gapps and Rom apps but it still it happens ....
then i got back to the old layout ....and tried this custom sense rom ...
I will now try it once again and will let you know....
Thank you once again...

Thant said:
Flash the latest TWRP for the BIG Layout there the data partition is not used, flash the TWRP2.8.5 then format your sd card as ex4 then mount sd card and test some LP roms Or here you can download some Sense5 roms converted for the new layout
here you can read all about new layout and download all you need
Click to expand...
Click to collapse
Hello,
I don't know, what happened with my phone when I tried to flash the TWRP2.8.5 it failed twice and just tried to restart it and flash it again , but i find there is very very low brightness and i am unable to see .....and i kept my phone for charging and left it for whole night.
Today i tried to flash and was successful ...
But the problem is like, i can hardly see the options in Bootloader and when i select recovery it goes in recovery mode but there is no display Or its very low brightness and i cannot see any thing but can still feel the vibration when i touch on the screen....
My phone is working but only very low brightness ....
I hope , I explained it clearly .....

Patel23 said:
Hello,
I don't know, what happened with my phone when I tried to flash the TWRP2.8.5 it failed twice and just tried to restart it and flash it again , but i find there is very very low brightness and i am unable to see .....and i kept my phone for charging and left it for whole night.
Today i tried to flash and was successful ...
But the problem is like, i can hardly see the options in Bootloader and when i select recovery it goes in recovery mode but there is no display Or its very low brightness and i cannot see any thing but can still feel the vibration when i touch on the screen....
My phone is working but only very low brightness ....
I hope , I explained it clearly .....
Click to expand...
Click to collapse
I don't know then what to do. Are you flash the boot.img from rom archive?

Thant said:
I don't know then what to do. Are you flash the boot.img from rom archive?
Click to expand...
Click to collapse
Yes i tried everthing but I am still not able to see ....it works but the only problem now is very very low brightness and till then i can not install any Rom .....and right now My phone is Rom-less....

Patel23 said:
Yes i tried everthing but I am still not able to see ....it works but the only problem now is very very low brightness and till then i can not install any Rom .....and right now My phone is Rom-less....
Click to expand...
Click to collapse
Then I don't have idea what to do

[HRT-Super_Lin] Huawei Mate8 full range of EMUI5. 0_B580 power and smooth ROOT Lite

translation with Google
[Basic information]
ROM Name: [HRT-Super_Lin] Huawei Mate8 full range EMUI5. 0_B580 Power smooth ROOT Lite
ROM Size: 932M
Adaptation version: Mate8 full range
Test models: Mate8 full series
Author : HRT-Super_Lin
[ROM details]
ROM based on official EMUI5. 0_B580 extract production, global odex merge
Add desktop 5X5 options, desktop long press slide, more settings, desktop layout, select
maintain the official complete style, optimize memory usage SuperSU rights management, For ROOT (Superuser)
To open the system update software, in the system / app / HwOUC. Bak Suffix for the apk
Zipalign optimization, reduce memory partition occupancy, add busybox, to facilitate the use of advanced users
delete address book Huawei customer service, to retain Huawei boot sound official Its weather components and system functional components
club.huawei.com
MT8-EMUI5.0-AL10_B580.zip
Mega Link comes later...
1. first must unlock the phone, and successfully brush into the Chinese TWRP Recovery, to ensure that the computer installed a good phone driver, download the recovery after decompression, the phone open USB debugging connected to the computer, double-click run. Bat start brushing, TWRP Recovery address Of TWRP):
MT8-EMUI5.0_TWRP.rar -> https://pan.baidu.com/s/1qXWrilm
2. Download ZIP format brush package, copied to the memory card, can be an external card can also be a built-in card, you can copy to the root directory, you can also copy to the subdirectory
3. Use the Recovery tool or in the shutdown state long press Volume 'button to enter the recovery interface. 4. After entering Recovery, click Clear Data to clear the data and return to the main interface. 5. Return to the main interface and select Install Brush Pack. The internal storage called: emmc, external storage called sdcard, click on the top of the UP A Level return to a directory) 'click Brush Pack' sliding brush into
6. Card brush is not necessary after the success of double-clear, otherwise it may lead to ROOT failure
ROM built several practical promotional software, if not, please use the re-file manager for unloading
statement: recently found someone steal my ROM to join the promotion without the test release, if found, please machine friends Report, please respect the author of labor results, forbidden based on the ROM for the second package, offenders must study
[ROM] Download
Huawei MATE8 entire network （NXT-AL10）：pan.baidu.com/s/1qXWrilm
Huawei MATE8 Telecom Edition （NXT-CL00）：pan.baidu.com/s/1c1FKBDI
Huawei MATE8 China Unicom （NXT-DL00）：pan.baidu.com/s/1pLRjMBp
Huawei MATE8 mobile version （NXT-TL00）：pan.baidu.com/s/1dFqWs85

hi
this new rom or this kang rom or what?
this for L29 or just for AL10?
i have L29 debranded to AL10 can i flash this rom over kangb577?
some info please about this rom
thanks

I have a L29C432 and am from C432B560 to Kang AL10 B580.

Hen Ry said:
I have a L29C432 and am from C432B560 to Kang AL10 B580.
Click to expand...
Click to collapse
is developer options working with you?

Can u load the link to Google or megalink for both twrp and b580 custom rom?

hamadazh said:
hi
this new rom or this kang rom or what?
this for L29 or just for AL10?
i have L29 debranded to AL10 can i flash this rom over kangb577?
some info please about this rom
thanks
Click to expand...
Click to collapse
I have L09C432B560 then I installed kangB577. I download the rom from the link and flash this rom over kangB577. This rom is similar to stock rom without gapp and with chinese apps. However the rom is rooted. There is no Kang settings in this rom.

https://mega.nz/#!IRc2Gb4Q!8NJyuJ3VC7wJpHM4EzvgYDwM9RJYeIzaOoZLM2nn8n0

Every thing went ok on L29C185 debrnded to DL00
Thanks great work.

Tried to flash this over a marshmallow rom by accident. Its stuck in "Booting Now" is there a way i can fix this? :/

BrownyDroid said:
Tried to flash this over a marshmallow rom by accident. Its stuck in "Booting Now" is there a way i can fix this? :/
Click to expand...
Click to collapse
You need to get into twrp, full wipe and restore or flash your previous rom.

[email protected] said:
You need to get into twrp, full wipe and restore or flash your previous rom.
Click to expand...
Click to collapse
I fixed it!
If anyone tries to flash from 6.0 to 7.0 and it wont boot, do what i did //
Use EMUI Recovery to grab the latest running version and let that install if you can, and then update it to EMUI 5.0 on AL10
Then install TWRP on 5.0 (I used 3.0.2.0) from this thread = https://forum.xda-developers.com/mate-8/general/twrp-3-0-2-0-mate-8-t3521215
After booting into TWRP on 7.0 the first thing i did was decrypt the data partition by going into Wipe -> Data -> Advanced and then changing it in the Change File System option from ext4 to ext2, and then back from 2 to 4.
It will take 20-30 mins to do going back to ext4, this is normal. then it is DONE
This allowed it to be wiped and decrypted for my AL10 model, otherwise you couldnt access the data partition properly. (And just wiping the data partition didnt work for some reason, not sure it just had errors.)
Then I flashed this rom and everything has gone smoothly since. Not a single worry at all in the world after that, no need to reflash any root privs or anything. Props to everyone for their software/firmwares respectively, I own none of this and am just saying how/what I did to get this working even after screwing it up.
If anyone accidentally flashes 7.0 over 6.0 and it wont boot, try this... ^^
EDIT - Changed, something I did didnt work the second time, fixed.

BrownyDroid said:
I fixed it!
If anyone tries to flash from 6.0 to 7.0 and it wont boot, do what i did //
Use EMUI Recovery to grab the latest running version and let that install if you can, and then update it to EMUI 5.0 on AL10
Then install TWRP on 5.0 (I used 3.0.2.0) from this thread = https://forum.xda-developers.com/mate-8/general/twrp-3-0-2-0-mate-8-t3521215
After booting into TWRP on 7.0 the first thing i did was decrypt the data partition by going into Wipe -> Data -> Advanced and then changing it in the Change File System option from 4 to 1, and then back from 1 to 4.
This allowed it to be wiped and decrypted for my AL10 model, otherwise you couldnt access the data partition properly. (And just wiping the data partition didnt work for some reason, not sure it just had errors.)
Then I flashed this rom and everything has gone smoothly since. Not a single worry at all in the world after that, no need to reflash any root privs or anything. Props to everyone for their software/firmwares respectively, I own none of this and am just saying how/what I did to get this working even after screwing it up.
If anyone accidentally flashes 7.0 over 6.0 and it wont boot, try this... ^^
Click to expand...
Click to collapse
Sorry but i don't understund, in whipe>data>change file system i have ext2, ext3, ext4, fat, exfat, f2fs. What i do? Thanks.
Inviato dal mio SM-N920F utilizzando Tapatalk

Some apps crash while navigating inside. Best example: Google Play Store, after clicking "read more" when showing app details. Other example: In Signal Messenger when entering a conversation.
I flashed Open Gapps Pico version.
Any suggestions?

[email protected] said:
You need to get into twrp, full wipe and restore or flash your previous rom.
Click to expand...
Click to collapse
entonjackson said:
Some apps crash while navigating inside. Best example: Google Play Store, after clicking "read more" when showing app details. Other example: In Signal Messenger when entering a conversation.
I flashed Open Gapps Pico version.
Any suggestions?
Click to expand...
Click to collapse
I never flashed Gapps, i went into HiApp and installed the play store through there and then updated it, worked perfectly.
After i reinstalled the rom because of some errors with the camera i was getting i ended up having some problems with google play services but I just downloaded the latest online and installed it, been smooth since.
AND i can confirm, im not getting and "read more" crashes or Messenger crashes whatsoever. Sorry to hear about your problem! If it keeps happening try backing up data, reflashing the rom or flash stock first then reflash it and try installing google play store through HiApp.

I have a NXT-DL00 with a custom rom , rooted,TWRP etc... can I install your NXT-AL10 version?

batman74 said:
Sorry but i don't understund, in whipe>data>change file system i have ext2, ext3, ext4, fat, exfat, f2fs. What i do? Thanks.
Inviato dal mio SM-N920F utilizzando Tapatalk
Click to expand...
Click to collapse
Sorry! Updated.
I went and changed it from ext4 to ext2 which took only less than 1 min, and then from ext2 to ext4 which took about half an hour.
Then it worked!
(Sorry for the confusion)
---------- Post added at 09:31 AM ---------- Previous post was at 09:28 AM ----------
stratanic said:
I have a NXT-DL00 with a custom rom , rooted,TWRP etc... can I install your NXT-AL10 version?
Click to expand...
Click to collapse
If you try anyways, make sure you make a backup of your current rom before flashing and tell us what you did/results.
If its on a 6.0 rom you can follow the mini guide I had written, get yourself into EMUI 5.0 before you flash it. either by the official updater if you can by Restoring through the EMUI recovery back to stock and updating, or flashing an EMUI 5 rom and getting 3.0.2-0 twrp on there first.

Update : Been running this rom on EMUI 5.0 since release and it is super stable and amazing to run.
Been the best rom ive had on my Mate 8, definitely deserves some more attention. My battery life is about 15-25% better than emui 4.x and the phone doesnt have wakelock and app sleep problems for me at all compared to previous roms ive used.
We just need this rom with Kang VIP and it would be 110% sweet!
Waiting for a release of Xposed to come out so i can test and report back.

ive seen some users installing this rom over the latest kangvip, that way one has best of both worlds
Sent from my Huawei Mate 8 NXT-AL10

jbmc83 said:
ive seen some users installing this rom over the latest kangvip, that way one has best of both worlds
Sent from my Huawei Mate 8 NXT-AL10
Click to expand...
Click to collapse
Hi jbmc....how to do? You mean flash kang and then dirty flash HRT? How will have both functionalities?
Also, in OP it is not clear what to wipe and what not to...
"Card brush is not necessary after the success of double-clear, otherwise it may lead to ROOT failure"....what this means exactly?

There is a new hrt b584 version available , I saw it available on the Chinese website but don't have baidu

[D5503]Prerooted Customized IN 14.6.A.1.236 Flashable Zip for Sony Xperia Z1 Compact

Hello mates, Here is
D5503_Customized IN_1281-0184_14.6.A.1.236_R3D Prerooted Flashable Zip for Sony Xperia Z1 Compact Locked Bootloader
Made by PRFCreator_v1.3
You need only rooted phone and TWRP
For Root Xperia Z1C : https://forum.xda-developers.com/xperia-z1/general/root-xperia-z1-lollipop-5-1-1-build-14-t3246373
Or you can any well known and safe method for rooting. I have use kingroot 4.5.2.apk, after root I installed Z1C-lockeddualrecovery2.8.26.
For Dual Recovery : https://forum.xda-developers.com/showthread.php?t=2647480
In this creation you will get Stock Sony Rom 5.1.1.{ rooted with SuperSu (2.46) and Z1C-lockeddualrecovery2.8.26 }
How to Install:
1. Download file
2. Copy this zip in your sd card or internal memory( In recovery you can change default storage )
3. Boot to recovery (Use TWRP)
4. Wipe data,Cache and Dalwik Cache
5. install flashable-prerooted-signed.zip
6. Reboot to System
I have flashed on Stock Sony 14.6.A.1.236 in my Xperia Z1 Compact and tested everything is working good. There isn’t any problem in this rom. After installation this rom we can remove System apps, Ringtones etc… which are we don’t use.
In this rom I didn’t added Xposed. So you can install later.I have installed xposed-v84-sdk22-arm after flash rom.
Download Link : https://drive.google.com/open?id=0B2DnyFUiK93lZW1ncXlLd19JSDg
MD5: 3137f4b552a991d8cb8936749b772528
Download Link for Prerooted Zip with Xposed and SU 2.79 : https://1drv.ms/u/s!AqRWEkw4JbcJhBZESlNAZ2S-H0gJ
MD5: a36e3db078d8f8c0b0cca46f675f3259

how to install
How to install including md5?

jmcatamora said:
How to install including md5?
Click to expand...
Click to collapse
How to Install:
1. Download file
2. Copy this zip in your sd card or internal memory( In recovery you can change default storage )
3. Boot to recovery (Use TWRP)
4. Wipe data,Cache and Dalwik Cache
5. install flashable-prerooted-signed.zip
6. Reboot to System
There is no need to including md5, it is for checking purpose is your downloaded file is corrupted or not.

thank you
Can you help me . How to install xpose .??plz show me the download file xposed-v84-sdk22-arm and the framework.

jmcatamora said:
Can you help me . How to install xpose .??plz show me the download file xposed-v84-sdk22-arm and the framework.
Click to expand...
Click to collapse
Thanks to rovo89 for xposed support .
This is the link for download xposed framework
http://dl-xda.xposed.info/framework/sdk22/arm/
Detailed instructions for installation go to this link
https://forum.xda-developers.com/showthread.php?t=3034811

Thanks a ton for this! Worked awesome!
Since I went from stock 5.0.2 -> 5.1.1 ... I tried not wiping data and it seems everything still works fine! My apps, settings and data are all there =) ... so far w/o bugs.
I installed cyberian 7.1 camera(primary reason for my attempt at the upgrade) ... and seems to be working 100% w/o issue =)

GenTarkin said:
Thanks a ton for this! Worked awesome!
Since I went from stock 5.0.2 -> 5.1.1 ... I tried not wiping data and it seems everything still works fine! My apps, settings and data are all there =) ... so far w/o bugs.
I installed cyberian 7.1 camera(primary reason for my attempt at the upgrade) ... and seems to be working 100% w/o issue =)
Click to expand...
Click to collapse
Happy to know it is working on without wiping data.

PARESH AHAR said:
Happy to know it is working on without wiping data.
Click to expand...
Click to collapse
An update, its still working amazingly bug free!!! (w/o data wipe)
Also, *I think* battery life has much improved ... but that may be because I wiped cache and also turned off Stamina mode after reading it sucks battery life rather than help it lol!
I did run into some battery level quirkiness within the first few days of install, but hoping it was just some learning curve the OS had to do w/ battery ... time will tell =)
I do have a question tho, just noticed you state the bootloader/recovery is "locked"? Does this overwrite my previous "unlocked" state and its relocked now? Or does an unlocked state persist? Thanks

GenTarkin said:
I do have a question tho, just noticed you state the bootloader/recovery is "locked"? Does this overwrite my previous "unlocked" state and its relocked now? Or does an unlocked state persist? Thanks
Click to expand...
Click to collapse
No,this doesn't overwrite your unlocked bootloader. your unlocked state is persist.You can check by dialing *#*#7378423#*#* /Service info/Configuration/Rooting status:

Sad update, seems my phone has fallen victim to the "LP upgrade & damaged battery" coincidence =( ... I know its not a fault of ur ROM. Phone works fine from 100% to 50% then a 50% it rapidly drops to 1% and shuts off =/
That being said, ordered a replacement battery kit + back door + NFC tag. Hopefully normal battery functionality will be restored after its replaced =)
Seems to be a widespread problem =/ Its weird because I had LP 5.0.2 on it previously.

Battery replacement went well, back to full expected usage time!

blank screen after sony logo what should i do i have an unlock bootloader TWRP 3.0.2 on FotaKernel

nhicko95 said:
blank screen after sony logo what should i do i have an unlock bootloader TWRP 3.0.2 on FotaKernel
Click to expand...
Click to collapse
Bro I have tried locked bootloader. But I think GenTarkin installed on unlocked bootloader successful. First you should flash stock.ftf and after go further as first post.

Dirty flash I love you dirty flash blahblahblah
Thanks for this, just what I needed without the hasle as Gen said I just flashed over the rom I was using (mx 8.5), wiped dalvik and that other thing but kept data and now my phones overheating has stopped, installed xposed and my tweaks reinstalled themselves... Because of the dirty flash some of the apps needed updating but apart from that its ask good... Nice one

Update Zip
Zip is updated with Xposed and SU 2.79
Download Link : https://1drv.ms/u/s!AqRWEkw4JbcJhBZESlNAZ2S-H0gJ

Is there an Arabic language?

azoga said:
Is there an Arabic language?
Click to expand...
Click to collapse
Stock languages

There is a problem with Facebook and Messenger app (normal, not lite versions). When my girlfriend is trying to run these apps the screen just is just blinking (black&white) every 0,5 of sec. and nothing else is happening. Reinstalling those apps does not solve the problem.

watchoutbehindyou said:
There is a problem with Facebook and Messenger app (normal, not lite versions). When my girlfriend is trying to run these apps the screen just is just blinking (black&white) every 0,5 of sec. and nothing else is happening. Reinstalling those apps does not solve the problem.
Click to expand...
Click to collapse
You need to install an older version of facebook.

14.3.b.0.310
Can i flash this rom from stock rom 14.3.b.0.310?