Develop Bugs

[RECOVERY] ClockworkMod Recovery for A3000-H [v6.0.5.1]

PREAMBLE
I have built CWM for our Lenovo A3000-H - tested it as well, everything (apart from the bugs mentioned below) seems to work. This is not a "port", it has been compiled from source.
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version with 3G) with the a3000_prc_3gfull board/partition table. It may or may not work on others.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery image
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
DOWNLOAD
DevDB
CHANGELOG
Device-specific:
Commits - lenovo-a3-dev/device_lenovo_a3
Code:
[B][U]20/12/2014:[/U][/B]
[LIST]
[*]Fixed some minor issues
[*]Fixed USB PC Mass storage[/list]
[B][U]30/11/2014:[/U][/B]
[LIST]
[*]Updated CWM to 6.0.5.1[/list]
[B][U]10/06/2014:[/U][/B]
[LIST]
[*]Updated CWM to 6.0.4.9
[*]Fixed external sdcard - you can now install ROMs/MODs from both the internal OR the external sdcard!
[*]Imported some build props from Stock ROM
[/LIST]
CWM:
Commits - CyanogenMod/android_bootable_recovery
CREDITs
Koush and the CyanogenMod team
XDA:DevDB Information
ClockworkMod Recovery for the Lenovo A3000-H, Tool/Utility for the Lenovo A3000
Contributors
Olivier
Source Code: https://github.com/CyanogenMod/android_bootable_recovery
Version Information
Status: Stable
Stable Release Date: 2014-11-30
Created 2014-05-18
Last Updated 2015-09-26

Awesome
GJ bro
Cheers

Successfully flashed this recovery to mine A3000-H 4gb 3G tablet.
I tried backing up my ROM, but it froze while "Backing up boot image". Have not tried anything else.

MirXas said:
Successfully flashed this recovery to mine A3000-H 4gb 3G tablet.
I tried backing up my ROM, but it froze while "Backing up boot image". Have not tried anything else.
Click to expand...
Click to collapse
And you couldn't grab a log afterwards?
Try
Code:
adb pull tmp/recovery.log
and upload the log please.
Gesendet von meinem Xperia S mit Tapatalk

Olivier said:
And you couldn't grab a log afterwards?
Try
Code:
adb pull tmp/recovery.log
and upload the log please.
Gesendet von meinem Xperia S mit Tapatalk
Click to expand...
Click to collapse
Strangely, I have'nt thought of that. I'll give you a log tomorrow. Going to bed now. It's pretty late in my country

thank u 4 your work！and why not transplant twrp which i got used to

Hi Olivier
Could you please tell me how to flash the img file?
Cheers

droople said:
Hi Olivier
Could you please tell me how to flash the img file?
Cheers
Click to expand...
Click to collapse
If you already have ROM package (including flash tool) from one of "Azam426" threads, it's simple:
1. Just open "Flash_tool"
2. Tick "DA DL All with check sum"
3. Load "scatter-loader" file and point to "MT6589_Android_scatter_emmc.txt".
4. Uncheck everything except for "RECOVERY"
5. Click the "RECOVERY" title and point that to "recovery.img" file downloaded from this thread.
6. Switch off the tablet, prepare the USB cable, and click "DOWNLOAD"
7. Wait a few seconds, then connect the cable to the tab.
8. In case if you get any error messages when you click "DOWNLOAD", unplug the cable then click "FIRMWARE->UPGRADE" option, wait a few seconds and reconnect the cable to the tab.
Please note, I'm not responsible if your tab got bricked, burned, exploded, loosing some or all of your data, etc.
Although flashing this recovery doesn't do any harm (on my device), but just to be safe, please do backup your important files, PIMs, emails, etc.
Keys assignment:
- Vol up = Up
- Vol down = Down
- Pwr button = Select
=> In case you're wondering how to enter recovery, just turn off your device, press and hold vol up + power button until you have this screen:

A new build is up, some storage issues have been fixed up. Updated the OP.

I did all steps, unchecked everything (PRELOADER become RED) and loaded recovery.img and click download but it ask if I want to downloading anyway ?! because all images are not correctly loaded. I said YES, and it said Image RECOVERY checksum failed !
what did I wrong ?!

Shadow_Nexus said:
If you already have ROM package (including flash tool) from one of "Azam426" threads, it's simple:
1. Just open "Flash_tool"
2. Tick "DA DL All with check sum"
3. Load "scatter-loader" file and point to "MT6589_Android_scatter_emmc.txt".
4. Uncheck everything except for "RECOVERY"
5. Click the "RECOVERY" title and point that to "recovery.img" file downloaded from this thread.
6. Switch off the tablet, prepare the USB cable, and click "DOWNLOAD"
7. Wait a few seconds, then connect the cable to the tab.
8. In case if you get any error messages when you click "DOWNLOAD", unplug the cable then click "FIRMWARE->UPGRADE" option, wait a few seconds and reconnect the cable to the tab.
Please note, I'm not responsible if your tab got bricked, burned, exploded, loosing some or all of your data, etc.
Although flashing this recovery doesn't do any harm (on my device), but just to be safe, please do backup your important files, PIMs, emails, etc.
Keys assignment:
- Vol up = Up
- Vol down = Down
- Pwr button = Select
=> In case you're wondering how to enter recovery, just turn off your device, press and hold vol up + power button until you have this screen:
Click to expand...
Click to collapse
Thank you so much

I Don't Have PC or laptop
Shadow_Nexus said:
If you already have ROM package (including flash tool) from one of "Azam426" threads, it's simple:
1. Just open "Flash_tool"
2. Tick "DA DL All with check sum"
3. Load "scatter-loader" file and point to "MT6589_Android_scatter_emmc.txt".
4. Uncheck everything except for "RECOVERY"
5. Click the "RECOVERY" title and point that to "recovery.img" file downloaded from this thread.
6. Switch off the tablet, prepare the USB cable, and click "DOWNLOAD"
7. Wait a few seconds, then connect the cable to the tab.
8. In case if you get any error messages when you click "DOWNLOAD", unplug the cable then click "FIRMWARE->UPGRADE" option, wait a few seconds and reconnect the cable to the tab.
Please note, I'm not responsible if your tab got bricked, burned, exploded, loosing some or all of your data, etc.
Although flashing this recovery doesn't do any harm (on my device), but just to be safe, please do backup your important files, PIMs, emails, etc.
Keys assignment:
- Vol up = Up
- Vol down = Down
- Pwr button = Select
=> In case you're wondering how to enter recovery, just turn off your device, press and hold vol up + power button until you have this screen:
Click to expand...
Click to collapse
Do you know any method without PC? :-'(

Will this work on the f version of the tablet? (The wifi-only one)

Have tested on the A3000-F, and I want to confirm that it works.

PJMOR said:
Have tested on the A3000-F, and I want to confirm that it works.
Click to expand...
Click to collapse
Thanks for the confirmation.

CWM v6.0.5.1 is up! This time, I have uploaded a flashable ZIP so you can easily upgrade using an existing recovery. If you want to flash it as before then just extract the recovery.img from the ZIP file and flash it however you want to flash it.

Thank you sir...
I have tested this recovery on my Lenovo A3000-H and there is no bug in PC USB mass storage...
I don't know how but this is true..
My build number A3000_A422_013_026_140926_WW_CALL_FUSE

Another build is up, CWM is now intended to work with a3000_prc_3gfull devices.

Olivier said:
Another build is up, CWM is now intended to work with a3000_prc_3gfull devices.
Click to expand...
Click to collapse
Thank you Sir...
I will test the new build

Sir The download link is not working it says error 404 not found

[Discussion+Guide] [Samsung A10S (A107F)] Bootloader Unlock, lock And Root

Only for Device: Samsung A10S [SM-A107F]
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will meow at you.
*
*/
I have the mentioned model and I tried some things on it. Sharing my experience with you as a guide.
Backup anything you need out of the phone before proceeding as the next steps erases the phone data.
You need a windows machine to follow this guide.
My experience with
Bootloader Unlocking [Source]
It has a relatively simple bootloader unlocking procedure.
To unlock bootloader, go to developer options and enable OEM Unlocking. Then reboot into download mode. Hold down the vol up key for oem unlocking. Quickly press the volume up button as soon as the next screen comes up. If done right, it should erase userdata automatically on the next boot. After erase, it will reboot. setup the phone with default options and go to developer options again. That's it, bootloader unlocked.
Bootloader Locking
Binary == Official? Follow This
Binary == Custom ? Follow This
Root
Summary: After rooting, phone didn't recognize IMEI anymore, so, no network. Phone storage was reduced down to 8 gb instead of 32gb.
But nevertheless, root worked.
Guide Here.
Details here:
ShaDisNX255 said:
By the way, the signal problem has been reported on other occasions.
It seems to be a problem on this Mediatek SoC
https://github.com/topjohnwu/Magisk/issues/1801
topjohnwu seems to have just brushed it off so it doesn't seem like it's going to get fixed anytime soon
Click to expand...
Click to collapse
Flashing the Rooted partitions+any GSI rom
Source:
kkoo said:
Hello, ...
Click to expand...
Click to collapse
Requirements:
7-Zip / 7-Zip ZS [How to unpack with 7-Zip?]
Odin
Null vbmeta.img
View attachment 5039569 [This needs Windows command prompt or Powershell]
Steps:
1. Download and unpack stock rom.
2. Unpack AP_*.tar.md5 to a new folder to keep them seperate.
3. ....
Discussion: If any developer is willing to make a recovery for it, I am willing to test it.

I have built a kernel for the a107f
@afrojanoon
Does anyone want to test it?

physwizz said:
I have built a kernel for the a107f
@afrojanoon
Does anyone want to test it?
Click to expand...
Click to collapse
yes please also please share how can I install it on my phone
(didn't installed twrp on it)

physwizz said:
I have built a kernel for the a107f
@afrojanoon
Does anyone want to test it?
Click to expand...
Click to collapse
I do.

[Guide] [Root] Debrand your lg v50 from carrier boot animation, apps... etc (SKT)

DISCLAIMER NOTICE
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
So this is How I managed to get rid of all sh*t that I found in my phone
BACKUP before you start
1- (obviously) you have to root your lg v50, personally I followed this guide https://lge.fun/thread-159.htm
if you have root with older android 10 and you dont know how to update head to 2nd step
*install TWRP >> https://forum.xda-developers.com/v50-thinq/how-to/unofficial-twrp-3-3-1-0-t4140319
*reboot to TWRP by holdong Voldown+power >> when first screen showup release power then hold it back fast, keep Voldown press >> press yes on delete user data (wont actually delete anything)
2- sideload this zip file in TWRP (found in attachment)
then go to wipe> advanced> format data
reboot
3-[if you dont want to update skip to step 4] download latest patched boot image from here https://kdz.gresslg.tk then flash it to boot partition in TWRP
then in lgup software https://forum.xda-developers.com/showpost.php?p=80247013&postcount=5
tick partition dl then tick everything EXCEPT boot_a + boot_b (boot to lgup download mode by holding Volup+usb)
4- Reboot to twrp> Advanced> file manger
go to /OP
There you will find Bootup+shutdown animations and sounds
you can delete them to force the phone to use stock LG boot animation found in system/product/media or product/media
5-you can use app manager to uninstall or disable bloatware https://labs.xda-developers.com/store/app/de.realvoxel.appmanager
6-disable Dual clock with this guide https://forum.xda-developers.com/v50-thinq/how-to/guide-remove-roaming-clock-update-t4086295
7- Smash Thanks botton
Dont be shy to ask any question or share any tips

hello guys.
Im about to buy a V50 but wich carrier is the best for unlock and root...?

d_Barood said:
DISCLAIMER NOTICE
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
So this is How I managed to get rid of all sh*t that I found in my phone
BACKUP before you start
1- (obviously) you have to root your lg v50, personally I followed this guide https://lge.fun/thread-159.htm
if you have root with older android 10 and you dont know how to update head to 2nd step
*install TWRP >> https://forum.xda-developers.com/v50-thinq/how-to/unofficial-twrp-3-3-1-0-t4140319
*reboot to TWRP by holdong Voldown+power >> when first screen showup release power then hold it back fast, keep Voldown press >> press yes on delete user data (wont actually delete anything)
2- sideload this zip file in TWRP (found in attachment)
then go to wipe> advanced> format data
reboot
3-[if you dont want to update skip to step 4] download latest patched boot image from here https://kdz.gresslg.tk then flash it to boot partition in TWRP
then in lgup software https://forum.xda-developers.com/showpost.php?p=80247013&postcount=5
tick partition dl then tick everything EXCEPT boot_a + boot_b (boot to lgup download mode by holding Volup+usb)
4- Reboot to twrp> Advanced> file manger
go to /OP
There you will find Bootup+shutdown animations and sounds
you can delete them to force the phone to use stock LG boot animation found in system/product/media or product/media
5-you can use app manager to uninstall or disable bloatware https://labs.xda-developers.com/store/app/de.realvoxel.appmanager
6-disable Dual clock with this guide https://forum.xda-developers.com/v50-thinq/how-to/guide-remove-roaming-clock-update-t4086295
7- Smash Thanks botton
Dont be shy to ask any question or share any tips
Click to expand...
Click to collapse
with this tutorial can I convert my unlocked lg v50 Sprint to a factory unlock one?
At least in software?

yerling said:
with this tutorial can I convert my unlocked lg v50 Sprint to a factory unlock one?
At least in software?
Click to expand...
Click to collapse
If You mean debloat apps and boot screen then yes

Hi, I own a now-dead LG V30 and I'm thinking of getting an LG V50, European version, on which I would like to do bootloader unlocking.
I'm not clear if the procedure works on this phone and if TWRP works correctly. On the other post I read that the touch doesn't work (I didn't understand though only when I do reset from OS or always).
And so I ask with this procedure I have a perfectly rooted phone, can I make backups on TWRP, use Magisk, etc.?
Can I do it once, or do I lose something when I do a reset?
If then I want to update the firmware?
Thanks and regards!

HarryCustom said:
Hi, I own a now-dead LG V30 and I'm thinking of getting an LG V50, European version, on which I would like to do bootloader unlocking.
I'm not clear if the procedure works on this phone and if TWRP works correctly. On the other post I read that the touch doesn't work (I didn't understand though only when I do reset from OS or always).
And so I ask with this procedure I have a perfectly rooted phone, can I make backups on TWRP, use Magisk, etc.?
Can I do it once, or do I lose something when I do a reset?
If then I want to update the firmware?
Thanks and regards!
Click to expand...
Click to collapse
Touch problems are appeared when reboot from magisk only, with bottons combination every thing works

[RECOVERY][3.5.2_10][gtelwifiue][gtesqltespr] TWRP Recovery

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Installation
Download version .tar when you haven't a TWRP installed and you are coming from stock ROM and flash it via Odin in download mode. NOTE: Un-check Auto-reboot option in Odin, install tar file (it has to be placed in AP section) and after reboot manually in recovery mode with vol+, home and power buttons. This because otherwise you'll come back to stock recovery.
Download version .img when you have a TWRP installed. Simply, from home, go in install -> install image -> select your .img file -> press recovery as partition where you want to install it -> swipe to flash -> reboot system.
Download version .zip if you have an old TWRP. (you can install a .img or .zip file, as you want)
Bugs/Issues
Encryption with password isn’t supported, so don’t set the secure boot or put a password at the boot of the device
Download
gtelwifiue (SM-T560NU): https://www.androidfilehost.com/?w=files&flid=328969
gtesqltespr (SM-T377P): https://www.androidfilehost.com/?w=files&flid=328968
Source code
gtelwifiue: https://github.com/TWRPSG-8916/android_device_samsung_gtelwifiue
gtesqltespr: https://github.com/TWRPSG-8916/android_device_samsung_gtesqltespr
Kernel: https://github.com/LOSSG-8916/android_kernel_samsung_msm8916

DJABHipHop said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Installation
Download version .tar when you haven't a TWRP installed and you are coming from stock ROM and flash it via Odin in download mode. NOTE: Un-check Auto-reboot option in Odin, install tar file (it has to be placed in AP section) and after reboot manually in recovery mode with vol+, home and power buttons. This because otherwise you'll come back to stock recovery.
Download version .img when you have a TWRP installed. Simply, from home, go in install -> install image -> select your .img file -> press recovery as partition where you want to install it -> swipe to flash -> reboot system.
Download version .zip if you have an old TWRP. (you can install a .img or .zip file, as you want)
Bugs/Issues
Encryption with password isn’t supported, so don’t set the secure boot or put a password at the boot of the device
Download
gtelwifiue (SM-T560NU): https://www.androidfilehost.com/?w=files&flid=328969
gtesqltespr (SM-T377P): https://www.androidfilehost.com/?w=files&flid=328968
Source code
gtelwifiue: https://github.com/TWRPSG-8916/android_device_samsung_gtelwifiue
gtesqltespr: https://github.com/TWRPSG-8916/android_device_samsung_gtesqltespr
Kernel: https://github.com/LOSSG-8916/android_kernel_samsung_msm8916
Click to expand...
Click to collapse
thank you for all your great and dedicated hard work

blaze2051 said:
thank you for all your great and dedicated hard work
Click to expand...
Click to collapse
NP

New TWRP 10 update for Samsung Galaxy Tab E 9.6 & Samsung Galaxy Tab E 8.0 MSM8916 Model
Change Log:
- Backup Now Works.
- Plus All Partitions can now be backup.

Hi there!!
I'm having some troubles installing TWRP on a gtelwifiue (Samsung SM-T561). Could the 3.5.2_10 version work also on this device?
I apparently uploaded with success TWRP through heimdall, but when I restart the device with (volumeUp+home+power) the recovery doesn't show up; instead, I get the logo splashpage with a small red exclamation mark on the top left :-|

fillotassi said:
Hi there!!
I'm having some troubles installing TWRP on a gtelwifiue (Samsung SM-T561). Could the 3.5.2_10 version work also on this device?
I apparently uploaded with success TWRP through heimdall, but when I restart the device with (volumeUp+home+power) the recovery doesn't show up; instead, I get the logo splashpage with a small red exclamation mark on the top left :-|
Click to expand...
Click to collapse
Nope, This version of TWRP is for SM-T560NU & the SM-T337P.

Development [Recovery][UnOfficial][A12][A13] OrangeFox Recovery 11.0

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Download:
*.ZIP LINK
*.TAR LINK
Bugs
Decryption will only work if no password/PIN/pattern is set in Android.
You tell me.
How to install
Spoiler: If you dont have a custom recovery installed
[*]Make sure your bootloader is already unlocked and OEM unlock is enabled, otherwise the installation will fail.
[*]Download and install Samsung Drivers
[*]Download the latest *.tar for your phone
[*]Download Odin, from example from https://downloads.corsicanu.ro/samsung/
[*]If not done before, flash disabled VBMeta with Odin in AP slot
[*]Turn off your phone, connect it to PC and reboot to download mode by holding down Volume up, Volume down and power button at the same time.
[*]Open Odin and check if your device is detected, then untick "Autoreboot" in its settings.
[*]Put the tar file you downloaded into the AP tab
[*]Click start and wait for the installation to finish, Odin will show PASS
[*]Now hold down Power button and Volume down for about 10 seconds to force reboot the device
[*]Immediately after the screen goes black release the keys and hold down Volume up and Power button at the same time until you enter OrangeFox (You may need to release the keys after about 20-30secs due to the "unlocked bootloader" warning)
[*]If you properly followed all the steps you should now see the OrangeFox menu.
[*]I HIGHLY recommend to flash services disabler right after you enter OrangeFox to disable forced encryption and stock recovery restoration.
[*]IF YOU ALREADY HAVE TWRP OR OLDER ORANGEFOX BUILDS INSTALLED, JUST DOWNLOAD AND FLASH THE ZIP FILE IN RECOVERY
Spoiler: If you do have a custom recovery installed
[*]Download the *.zip file
[*]Flash it in recovery.
[*]Once its done flashing, phone will reboot on its own to recovery
[*]If you properly followed all the steps you should now see the OrangeFox menu.
Sources: https://github.com/RisenID/android_device_samsung_a52sxq
Credits:
Orangefox team
@BlackMesa123 for the TWRP trees and general help and support.
@corsicanu for updating multidisabler for A12 and providing download links for Odin, USB drivers, etc.
Thanks to all my testers, you know who you are <3

Hey guys, after a lot of thpught, I have decided to drop official support, and provide unofficial builds, so that I can give you guys the best possible builds that I can, so there will be no more official ofox builds from me, but there will be unofficial ones. Thanks for understanding, hope you like these builds.

Changelogs
R11.1
- Fix /vendor backup restoring
- Updated kernel to DVK5
- Support Android 13 decrypt with no password
- Fix /efs, /sec_efs backup
- Fix fastbootd
- Disable stock recovery patching in /vendor
-Bundle Magisk Delta instead of Magisk

Reserved