Develop Bugs

Q: PHONE ACCEPT / REJECT not working, all other keys OK; software or hardware?

Hello, I have recently discovered the forum and the section dedicated to Android head units; before reading a couple of threads, I used to think my unit was pretty decent, but with some of the mods / apps provided here, it is almost flawless now. Thank you guys for your effort.
I have been using my Pumpkin unit for a while and only recently I installed XposedMTC and CarService, along with RK3066 (which I think was overkill) in an attempt to fix the only issue that was puzzling me: not all of my steering wheel controls would work; I got my NEXT/PREV to work and I can see the keycode in CarService app, but I have 3 other keys that don't seem to be picked up by the unit. These are the PHONE ACCEPT / REJECT buttons and the other once (which is the speech-to-command function).
I'm very new to both the Android head units and the modding that is behind it, so sorry if I don't make sense.
I am having trouble understanding if it is software related, or if the connection in this wires is going outside the CANBUS plug wiring; by this I mean that maybe these 3 keys are sending signals somewhere else? I say this because while upgrading from my stock unit, one of the plugs was left disconnected, as it had no socket to connect to in the new radio.
I'm not sure if this is the right place to ask, sorry for any inconvenience, but if someone went through this and managed to fix it, I'll be thrilled if you let me know how; the unit is from Pumpkin, and the car is a Mazda 3 from 2010.
Thanks in advance.

Dasaita/Hotaudio after 2 weeks....

excessdivide said:
Hello everyone,
Big thanks to the heavy hitters here that are making these units actually usable!
I received my Dasaita HA5217-V600 two weeks ago and thanks to having previously scoured these forums, I was able to install it, in my 2016 Toyota Corolla, with relative ease. Everything worked better than expected, and I had great bluetooth sound, strong WiFi connections, my door and A/C controls appeared on screen, my SWC all matched and decent FM reception. My bluetooth OBDII adapter is arriving this week so I'll have to report back on that.
Click to expand...
Click to collapse
My OBDII adapter arrived today and it immediately paired with my HU, and Torque Pro recognized it instantly! I'm thrilled at how easy this was.
For those interested, this is the adapter I purchased:
https://www.amazon.com/gp/product/B06Y6HLRKY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
So to recap:
My unit is:
MTCD HA5217-V600
10.2 " PX5 1.6 gHz, Octa-core, 2Gb/32Gb
Malaysk v5 ROM and MCU: MTCE v2.65f
Installed in 2016 Toyota Corolla S (6 speaker audio w/o factory "Entune" navigation system) and Rockford-Fosgate Prime's in both front and back.
SWC = all preprogrammed settings match my OEM settings, although they are unconfigurable.
Bluetooth connections have not yet dropped, volume and clarity are on pair with my previous Pioneer HU
Panel buttons all work and LEDs are configurable
Door and A/C controls all appear on screen.
GPS is fast and seemingly accurate so far. Recognized by every app that has looked for it.
OEM vehicle status listed properly in the 'vehicle' section
Amp/Fader/ViperFX all work as expected
WiFi connections are strong enough for my purpose. I can connect to my home WiFi from inside my garage.
AM/FM Reception and clarity are better than the stock system
Screen is bright and usable and auto-dims with Headlights on
Daylight brightness is a little difficult to see. (Then again I live in Florida and the tropical Sun made even my JVC, and Pioneer HU's difficult to see. Kenwood was the best for this IMHO)
OBDii interfaced paired quickly and easily and has so far stayed connected and recognized by apps
OEM Rear-view camera connects to the system without issue and is much easier to see on a 10" screen. As well as now having several configurable options in the "factory settings"
OEM USB port is recognized as well as the 2 additional USB ports included with the HU.
HOWEVER, the OEM AUX audio port is not usable with this configuration. (or if it is, I haven't figured out how to configure/access it yet)
I do not have a DAB+ or Front Camera, TV tuner/DVR so I do not have any information to share about those.
I tested the A/V in with a portable DVD player and there were no unusual issues there.
Over all I am very happy with this unit and am thrilled that I took the risk investing in it.
One more BIG thanks to everyone here who has helped to make these HU's worth it!

Thanks for the detailed write up. I just ordered mine. Px5 7 inch 2gb ram dasaita. Any tips for a newbie? I've been browsing the forums myself for the past couple of weeks and I'm aware of all the mods and custom ROMs etc. Just asking you if there's maybe any advice you wanna give on how I should proceed with the unit or just generally anything that might help.
Appreciate any reply

I have Dasaita/Hotaudio HA2100-v600 7" device and happy - it works here good!
@ Nasty_z: Stock rom & MCU and ModRom

excessdivide said:
My OBDII adapter arrived today and it immediately paired with my HU, and Torque Pro recognized it instantly! I'm thrilled at how easy this was.
For those interested, this is the adapter I purchased:
https://www.amazon.com/gp/product/B06Y6HLRKY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
So to recap:
My unit is:
MTCD HA5217-V600
10.2 " PX5 1.6 gHz, Octa-core, 2Gb/32Gb
Malaysk v5 ROM and MCU: MTCE v2.65f
Installed in 2016 Toyota Corolla S (6 speaker audio w/o factory "Entune" navigation system) and Rockford-Fosgate Prime's in both front and back.
SWC = all preprogrammed settings match my OEM settings, although they are unconfigurable.
Bluetooth connections have not yet dropped, volume and clarity are on pair with my previous Pioneer HU
Panel buttons all work and LEDs are configurable
Door and A/C controls all appear on screen.
GPS is fast and seemingly accurate so far. Recognized by every app that has looked for it.
OEM vehicle status listed properly in the 'vehicle' section
Amp/Fader/ViperFX all work as expected
WiFi connections are strong enough for my purpose. I can connect to my home WiFi from inside my garage.
AM/FM Reception and clarity are better than the stock system
Screen is bright and usable and auto-dims with Headlights on
Daylight brightness is a little difficult to see. (Then again I live in Florida and the tropical Sun made even my JVC, and Pioneer HU's difficult to see. Kenwood was the best for this IMHO)
OBDii interfaced paired quickly and easily and has so far stayed connected and recognized by apps
OEM Rear-view camera connects to the system without issue and is much easier to see on a 10" screen. As well as now having several configurable options in the "factory settings"
OEM USB port is recognized as well as the 2 additional USB ports included with the HU.
HOWEVER, the OEM AUX audio port is not usable with this configuration. (or if it is, I haven't figured out how to configure/access it yet)
I do not have a DAB+ or Front Camera, TV tuner/DVR so I do not have any information to share about those.
I tested the A/V in with a portable DVD player and there were no unusual issues there.
Over all I am very happy with this unit and am thrilled that I took the risk investing in it.
One more BIG thanks to everyone here who has helped to make these HU's worth it!
Click to expand...
Click to collapse
Hi, I'm a fellow Corolla owner in FL As well!
I just bought a Dasaita PX3 2GB RAM 16GB (Quad core vs your 8 core PX5 due to it being close to $300 flat on an ebay flash sale) and have a question regarding the AUX port, you said the stock USB was retained but not the AUX, is there an aux port on your unit or any way to hook one up?
-Where did you mount the GPS antenna?
-Are you using the stock interface, or have you tried any launchers? I downloaded auto mate and Car Launcher free and so far like Car Launcher's look.
-Anything unusual with your unit?
-Have you tested Waze and Google maps? Do they run stable?
-Does your unit pickup your wifi automatically when you startup the car?
I appreciate your very detailed post as I'm patiently waiting for mines to arrive within the next week.

gab2012 said:
Hi, I'm a fellow Corolla owner in FL As well!
I appreciate your very detailed post as I'm patiently waiting for mines to arrive within the next week.
Click to expand...
Click to collapse
I have a question regarding the AUX port, you said the stock USB was retained but not the AUX, is there an aux port on your unit or any way to hook one up?
*Sad to say that I have not yet found a way to use the AUX port, but then again I haven't tried very hard.
-Where did you mount the GPS antenna?
*I mounted mine on the passenger side dashboard, as far right and forward as it would go. It blends right in as far as I am concerned.
-Are you using the stock interface, or have you tried any launchers? I downloaded auto mate and Car Launcher free and so far like Car Launcher's look.
*I Bought Car Launcher Pro. By far the best overall. It has been steadily updated, has a great look/feel, easy to modify and the most stable.
-Anything unusual with your unit?
*Nothing that I can think of. I'm still in love with it!
-Have you tested Waze and Google maps? Do they run stable?
*I don't use Google Maps, but I have Waze autostart. I'm dependent upon it now! Lots of threads here about Google Maps not working well.
-Does your unit pickup your wifi automatically when you startup the car?
*as of HA-2.75 it does.
You |may| have to trim a piece or 2 off the bezel to get it to fit perfectly in your dash. I had to cut off 2 tabs on top of my PX5.
Good luck!

I have a similar 9" unit.
Running Malaysk v5 ROM and MTCE v2.71 as the bluetooth for 2.75 didn't work well.
I do have the DAB+ aerial and app and it works ok however mostly I use Google music. I have no problems using Waze or copilot.
What I haven't been able to do is get my reversing camera to show on the screen. I have a wireless version and both halfs have leds that light up when the car is in reverse but no picture regardless of which connection I use.
Also I can't get it to connect to a ELM357 OBD2 dongle.
I've had the unit for 4 months and last week while driving to work the screen went black, the unit was still working it was just the screen. The next time I started the car the screen came back....weird.
Other then this the units ace!

excessdivide said:
I have a question regarding the AUX port, you said the stock USB was retained but not the AUX, is there an aux port on your unit or any way to hook one up?
*Sad to say that I have not yet found a way to use the AUX port, but then again I haven't tried very hard.
-Where did you mount the GPS antenna?
*I mounted mine on the passenger side dashboard, as far right and forward as it would go. It blends right in as far as I am concerned.
-Are you using the stock interface, or have you tried any launchers? I downloaded auto mate and Car Launcher free and so far like Car Launcher's look.
*I Bought Car Launcher Pro. By far the best overall. It has been steadily updated, has a great look/feel, easy to modify and the most stable.
-Anything unusual with your unit?
*Nothing that I can think of. I'm still in love with it!
-Have you tested Waze and Google maps? Do they run stable?
*I don't use Google Maps, but I have Waze autostart. I'm dependent upon it now! Lots of threads here about Google Maps not working well.
-Does your unit pickup your wifi automatically when you startup the car?
*as of HA-2.75 it does.
You |may| have to trim a piece or 2 off the bezel to get it to fit perfectly in your dash. I had to cut off 2 tabs on top of my PX5.
Good luck!
Click to expand...
Click to collapse
Just to give you a quick update, I received my PX3 unit about a week ago and installed it. At first I encountered one main bug which was that the radio app would go to the background automatically every time I opened it, dasaita sent me the link to the MCU thread and everything updated fixing the issue.
As far as launchers go, I stuck with Car Web Guru for now as it gave the most options on a free basis to experiment with different themes.
The only thing I've noticed is that the backup camera image is a little laggy but nothing to die for.
The only thing I'm still trying to figure out is how to get my wifi hotspot to start automatically (Note 8) when connected to CAR KIT, I tried tasker but it says unable for my device.
I love this HU! and Dasaita on ebay has been very responsive.

gab2012 said:
Just to give you a quick update, I received my PX3 unit about a week ago and installed it. At first I encountered one main bug which was that the radio app would go to the background automatically every time I opened it, dasaita sent me the link to the MCU thread and everything updated fixing the issue.
As far as launchers go, I stuck with Car Web Guru for now as it gave the most options on a free basis to experiment with different themes.
The only thing I've noticed is that the backup camera image is a little laggy but nothing to die for.
The only thing I'm still trying to figure out is how to get my wifi hotspot to start automatically (Note 8) when connected to CAR KIT, I tried tasker but it says unable for my device.
I love this HU! and Dasaita on ebay has been very responsive.
Click to expand...
Click to collapse
Hello I have bought a Dasaita HA2039-S720 for Mitsubishi Outlander 2014. I have the same Issue with my Radio App. Everytime I open it, it goes in background. Kill it with the Task Manager can't stop the Music. I have to reboot the Device. I have MCU Version MTCE_HA_V2.75.1 and ROM px3-userdebug 7.1.2NHG47L eng.hct.20171206.143935 test-keys.
Did a system update realy fix your Problem? I noticed that this happend every time a station is scanned and saved. Delete the Cache and Programm Data from Radio App in the App section fixed the issue but you have no music then but white noise.
I have some Issues with apps in general. Sometimes Apps are crashing and did not load properly and stuck while loading.
My OEM Rear CAM Image is laggy and not very smooth too.
Today I tried to update die Rom with this Version HCT2_px3_7.1(20180206) but it failed. Don't know if it's the right one. The Device found this Image and promptet me to update. After a short loading screen a Faild message appeared on the screen and it showed an options screen. I inserted another SD CARD with the image of the update and choosed "update from SD or USB" but it failed again so I rebooted the system. I choose swipe in the beginning and after a reboot the system was in factory condition.
But can anybody explain me what went wrong and how to properly make a Rom and MCU update.
Thanx

Hey guys I just wanted to become a part of this I just purchased and installed this type radio along with the Bluetooth adapter for the cars computer. Hopefully I will soon get the ATSC digital antenna so I can watch TV when my wife goes in to shop for something that will supposedly: "only take a minute." I have to say the install was incredibly easy. Everything works very well and sounded great connected to my factory system of the 2013 Kia Optima. I did use the radio's subwoofer output and added a 300 watt powered Rockford Fosgate subwoofer. It all sounds amazing together. I attached two photos of the type of radio I purchased (or tried to. Kinda new here).
View attachment 4483442
View attachment 4483443

I am looking at one of these model for my Ford Focus, but can anyone tell me if it come with a separate canbus?? The only reason I am asking is that I have the V840-8 which doesn’t.... unfortunately it only has a prgramable key control, which doesn’t always work...
Many thanks for anyone that can help

Bradsr12 said:
I am looking at one of these model for my Ford Focus, but can anyone tell me if it come with a separate canbus?? The only reason I am asking is that I have the V840-8 which doesn’t.... unfortunately it only has a prgramable key control, which doesn’t always work...
Many thanks for anyone that can help
Click to expand...
Click to collapse
Hello
i don't know which model Focus you have. I have a Focus MK3 from 2012 and i just ordered this unithttps://nl.aliexpress.com/item/Dasaita-Android-8-0-4g-32g-Car-Radio-for-Ford-Focus-2012-2013-2014-2015-Multimedia/32889176494.html?spm=a2g0s.9042311.0.0.1e934c4diSRsuQ
and it comes with a canbus adapter and works great. i received it today and installed it. Everything works out of the box.

Thank you so much for your reply, mine is the Ford Focus mk2 2010 so slightly different, however despite the stereo surround the unit is the same, it the harness is a different connection... mine is a square connection
Really appreciate your help
---------- Post added at 10:02 PM ---------- Previous post was at 10:00 PM ----------
May I ask if yours is the V600??

Bradsr12 said:
Thank you so much for your reply, mine is the Ford Focus mk2 2010 so slightly different, however despite the stereo surround the unit is the same, it the harness is a different connection... mine is a square connection
Really appreciate your help
---------- Post added at 10:02 PM ---------- Previous post was at 10:00 PM ----------
May I ask if yours is the V600??
Click to expand...
Click to collapse
http://www.hot-audio.com/category/Ford-3.html
I tink they have a car specific unit for you too. Just check out their site. The benefits of these units is that it will fit perfect in your car and all cables and adapters are included...
Btw I have a v840-8 unit
Sent from my SM-G950F using Tapatalk

I would like to know the boot time for this Android 8 version? I am looking at getting one for my Chevy Cruze but the boot time is a big thing for me.

scotch&dry said:
I would like to know the boot time for this Android 8 version? I am looking at getting one for my Chevy Cruze but the boot time is a big thing for me.
Click to expand...
Click to collapse
My Dasaita PX5 4/32 unit (MCU version 2.88) turns completely off in 30 seconds (lowest preset in system settings) after turning the ignition off.
When turning the ignition on the unit is starting up behind the scenes. When you press power it's already half way in the booting process or even done depending on how quick you switch the unit on.
I'd say about 15 seconds to boot up. This is with a DAB+ unit and USB stick attached.
If you want instant on (e.g. when shopping for an hour or doing multiple deliveries), you can play with the different off time presets in the system settings.

TBM2 said:
My Dasaita PX5 4/32 unit (MCU version 2.88) turns completely off in 30 seconds (lowest preset in system settings) after turning the ignition off.
When turning the ignition on the unit is starting up behind the scenes. When you press power it's already half way in the booting process or even done depending on how quick you switch the unit on.
I'd say about 15 seconds to boot up. This is with a DAB+ unit and USB stick attached.
If you want instant on (e.g. when shopping for an hour or doing multiple deliveries), you can play with the different off time presets in the system settings.
Click to expand...
Click to collapse
Awesome. Thanks for this info @TBM2

How good is the microphone performance? I have an old android headunit that I could never get mics to work properly on. Voice calls and "Okay Google" is important for me when I upgrade.

Grims said:
How good is the microphone performance? I have an old android headunit that I could never get mics to work properly on. Voice calls and "Okay Google" is important for me when I upgrade.
Click to expand...
Click to collapse
It's an MTCD - they're pretty much all the same.
For best peformance on this platform, use an external mic, which may require the internal disconnected.

marchnz said:
It's an MTCD - they're pretty much all the same.
For best peformance on this platform, use an external mic, which may require the internal disconnected.
Click to expand...
Click to collapse
Sorry, I'm just curious as I just got one for my car installed... but the internal microphone performance is horrible. The box came w/ an external microphone, but is there something i need to do to disable the internal microphone?

scotch&dry said:
I would like to know the boot time for this Android 8 version? I am looking at getting one for my Chevy Cruze but the boot time is a big thing for me.
Click to expand...
Click to collapse
Like any MTCD unit, first boot is approx 15-20 secs, with the unit sleeping thereafter resulting in 'instant' resume.
Read

[PX3] Peugeot 407 - Factory parking sensors - steering wheel buttons

Hello All,
From few days I'm owner of PX3 device for my Peugeot 407. I've go two issues which I'cant solve. I'm using original ROM
Factory parking sensor
It doesn't work with delivered CAN Bus (BAGOO PSA-BG-02 SW: V002)
In product description is information that should be supported, but it doesn't.
On aliexpress comments I've found the tip that I should cut the pink cable to make it working again. Anyway it doesn't work. I've also try to disconnect each single cable from CAN Bus but it doesn't help as well.
Did anyone have a similar problem and resolve it ? On you tube I've found the information that additional CAN Bus interface should help, but maybe is the different solution ?
- Can I check somehow if any parking sensor signal are received by head unit ?
- Maybe I've got old version of CAN Bus ?
- Any others ideas ?
Buttons on steering wheel
In my device only buttons volume up / down work fine, others not. I'm not able to map them with the mapping apps (delivered with the device and from play shop)
Any way I can notice the reaction when I press them.
For example. When I wan't to find next station on radio. I need to press voice command button and then it works only one, then I need to press first button again.
I was wondering if the customize ROM e.g. by Malaysk can help with this issues ? Or is not the case ?
Thanks for your answers in advance.

same problem
Hello,
I have the same problem. I think it's a problem with the can-bus decoder. Have you been able to solve it?

Diablo3177 said:
Hello,
I have the same problem. I think it's a problem with the can-bus decoder. Have you been able to solve it?
Click to expand...
Click to collapse
Hi Diablo3177,
Not at all . I've installed Malaysk ROM, updated MCU and it hasn't help.
I alslo guess that is all about can-bus adapter. I will probably give up and istall extra parking sensor and remote on the steering wheel. It should work
Anyway please let me know if you find working solution.
I believe is possible:
https://youtu.be/lj3n35pUvhg
I've tried to contact with the guy from video, but he hasn't answer.

Hi,
Have you maybe resolve this problem? I have this two problems allso...

I have contacted the guy of the video. He gave me a update for my headunit and told me that the bagoo won't work in our car.
He is going to send me another canbus adapter. He lives in Turkey and I live in the Netherlands so it can take a while before I let you know if it works.
Frans

And that was the problem. The Bagoo is the wrong Canbus converter. I bought the one from the guy in Turkey and now everything works like expected.

Hi Frazzy,
Can you show your new canbus (photos and where we can buy) and share the update firmware?

This is the one I have now.
I bought it from him in turkey but its 25 euro shipping and 30 Euro money transfer. So I would look further if you are not desperate.
The update is specific to my head unit I think and it does nothing without the canbus adapter.

Thank for the replay. In the photo we cannot see all model number and software version.
But, now your Peugeot 407 original parking sensors, AC, Buttons on steering wheel, ... work well?
And the vehicle information, link "open doors", seatblets, lighs that don't work, errors, ... are all displayed?

This is a better foto
Everything works perfect. Also doors opening and closing is instant now and not laggy. all the buttons on the stearing column work to. I haven't found anything that isn't working yet.
Better image is attached

Frazzy said:
This is a better foto
Everything works perfect. Also doors opening and closing is instant now and not laggy. all the buttons on the stearing column work to. I haven't found anything that isn't working yet.
Better image is attached
Click to expand...
Click to collapse
What about temperature unit? Can you set the temperature unit to celsius? How many cabels are connetcted to connector from canbus decoder?

Temperature's ar in Celsius. You can count the wires in the first image. The black and white one are going to the external backup buzzer.

Frazzy said:
This is a better foto
Everything works perfect. Also doors opening and closing is instant now and not laggy. all the buttons on the stearing column work to. I haven't found anything that isn't working yet.
Better image is attached
Click to expand...
Click to collapse
where could I buy it ?? I also have 407 but I have parking sensors, the problem is only on the steering wheel that only the volume change works

Do some of you have an issue with the speaker for the parking sensors? Mine is on very low volume and I don't know how to increase it

Hi Guys,
Has anyone found the shop when the working cunbus may be bought ? I've found some on aliexpess (some on photos look very simiar for the Frazzy's one). However, all sellers wrote me back that it can't be sold separately. Only with the central unit from their store :/

Frazzy said:
This is a better foto
Everything works perfect. Also doors opening and closing is instant now and not laggy. all the buttons on the stearing column work to. I haven't found anything that isn't working yet.
Better image is attached
Click to expand...
Click to collapse
You posted 2 pictures with 2 different CANBUS decoders. On the first one it says For: Peugeot 20X(something) it's not readable but most probably is for 207.
The second picture says For Peugeot 407. Which one is working?
I also found a website (google RoadNavi i can't put external links yet) where these canbus adapters can be ordered separately, but i really need to know what model to order.
I also have the Bagoo canbus adapter and it won't take AC commands, stering wheels, passengers side input any many others ... it also broke my right Air flaps and had to service the car and dismount the whole dashboard. I fixed everything and mounted the original audio unit back untill i will find a fix for this problem.

You are the only one paying attention
The second one is the correct one.

Frazzy said:
You are the only one paying attention
The second one is the correct one.
Click to expand...
Click to collapse
Hi Frazzy,
I see there is no PX5 8 core 4 GB RAM for 407 from Mekede just PX3 4 core 2 GB....
if I buy this unit for my 407 Year 2009 vvv. ebay . c om/itm/112926331486?ul_noapp=true
will I get right can bus decoder or I will need to buy that one from Turkish guy for all stuff working (A/C control, front/rear park assist, board/trip computer, settings of car, steering wheel controls... ) ?
Thanks for help
L

I really don't know. I'm no expert in this stuff. I just found the guy with the working canbus adapter.
If you are getting a bagoo than it won't work.
By the way, on AliExpress they have px5's as well.

Lazyass123 said:
if I buy this unit ...will I get right can bus decoder
Click to expand...
Click to collapse
As I know, it's a lucky to buy with the correct can-bus decoder. All canbus sell with this units work with the basic functions of the 407, but the new versions also have resolve the problems with AC, steering keys, parking sensors, ...
Maybe you can contact the seller and ask for the version of canbus decoder or share with him the photo of this working decoder...

[Help] SWC only works 50% bottons Alfa Romeo 159

Hi
My auto radio version is:
px3-userdebug 7.1.2 NHG47L eng.hct20180
MTCE_XRC_V2.80_1
2Gb/ 16Gb
https://es.aliexpress.com/item/Isud...452.html?spm=a2g0s.9042311.0.0.215563c05GDxho
My Car: Alfa Romeo 159
Since a month ago, I´m trying to resolve my problem. Only 50% buttons swc are working:
My android radio has canbus box. I have accessed and configured canbus in "factory settings tap" but my problem continue ( by default canbus wasn´t configured ).
The app to remap the buttons does not detect any button on the steering wheel, it only shows "Reset" and "Save" but I can not do anything with it.
I have reading a lot of post... Is possible that I need to connect wire Key1 and wire Key2? How should I connect "key1" and "key2"? Could it be the solution?
Any kind of help is welcome. Thank you very much

moreno_cos said:
Hi
My auto radio version is:
px3-userdebug 7.1.2 NHG47L eng.hct20180
MTCE_XRC_V2.80_1
2Gb/ 16Gb
https://es.aliexpress.com/item/Isud...452.html?spm=a2g0s.9042311.0.0.215563c05GDxho
My Car: Alfa Romeo 159
Since a month ago, I´m trying to resolve my problem. Only 50% buttons swc are working:
My android radio has canbus box. I have accessed and configured canbus in "factory settings tap" but my problem continue ( by default canbus wasn´t configured ).
The app to remap the buttons does not detect any button on the steering wheel, it only shows "Reset" and "Save" but I can not do anything with it.
I have reading a lot of post... Is possible that I need to connect wire Key1 and wire Key2? How should I connect "key1" and "key2"? Could it be the solution?
Any kind of help is welcome. Thank you very much
Click to expand...
Click to collapse
Check that allí connectors from/to canbus and to the headunit are well connected (sometimes they require some force press to really be plugged)
On the link you provided there is a guy that commented that everything worked as expected including the SWC so....if you can't fix it contact your seller for support
Enviado desde mi SM-G950F mediante Tapatalk

moreno_cos said:
Hi
My auto radio version is:
px3-userdebug 7.1.2 NHG47L eng.hct20180
MTCE_XRC_V2.80_1
2Gb/ 16Gb
https://es.aliexpress.com/item/Isud...452.html?spm=a2g0s.9042311.0.0.215563c05GDxho
My Car: Alfa Romeo 159
Since a month ago, I´m trying to resolve my problem. Only 50% buttons swc are working:
My android radio has canbus box. I have accessed and configured canbus in "factory settings tap" but my problem continue ( by default canbus wasn´t configured ).
The app to remap the buttons does not detect any button on the steering wheel, it only shows "Reset" and "Save" but I can not do anything with it.
I have reading a lot of post... Is possible that I need to connect wire Key1 and wire Key2? How should I connect "key1" and "key2"? Could it be the solution?
Any kind of help is welcome. Thank you very much
Click to expand...
Click to collapse
On 1st photo the 3 "red" buttons are only working with the "original" factory installed "blue&Me" equipment, no other hardware can use or decode them.
On 2nd photo the 2 "red" button are only working with the original factory installed "blue&Me" equipment ad use to switch information on Factory Magneti Marelli multimedia/navigation unit during calls, with standard "simply" Alfa Romeo car stereo they are only working on charging disc from official CD Charger; no other hardware can use or decode them.
On some cases "non standard hard coded manufacturer swc" have funny responses; in my case Voice command button open the app carousel in my HU and the Open/close a phone call button activate the Mute function.
Check you Alfa Romeo Use and Maintenance Guide and Blue&Me User manual thaere was all the info provided by me.
So the other SWC are working like expected!

iRcKenny said:
On 1st photo the 3 "red" buttons are only working with the "original" factory installed "blue&Me" equipment, no other hardware can use or decode them.
On 2nd photo the 2 "red" button are only working with the original factory installed "blue&Me" equipment ad use to switch information on Factory Magneti Marelli multimedia/navigation unit during calls, with standard "simply" Alfa Romeo car stereo they are only working on charging disc from official CD Charger; no other hardware can use or decode them.
On some cases "non standard hard coded manufacturer swc" have funny responses; in my case Voice command button open the app carousel in my HU and the Open/close a phone call button activate the Mute function.
Check you Alfa Romeo Use and Maintenance Guide and Blue&Me User manual thaere was all the info provided by me.
So the other SWC are working like expected!
Click to expand...
Click to collapse
On 1st photo: I agree with you. My alfa romeo is a car of 2007 and it hasn´t blue&me installed. I did not know if I could use these buttons with the new radio
On 2nd photo: The buttons were working with my original radio. I could change the memorized radio programs. I've seen in some YouTube video, how this function is still operational with the android radio car and I would like use its.
Thank you very much for your help

moreno_cos said:
On 1st photo: I agree with you. My alfa romeo is a car of 2007 and it hasn´t blue&me installed. I did not know if I could use these buttons with the new radio
On 2nd photo: The buttons were working with my original radio. I could change the memorized radio programs. I've seen in some YouTube video, how this function is still operational with the android radio car and I would like use its.
Thank you very much for your help
Click to expand...
Click to collapse
Try long pressing the ones for "skip tracks/seek radio stations". My units acts like this. Try also all "Alfa Romes" canbus entries on Factory Settings

iRcKenny said:
On 1st photo the 3 "red" buttons are only working with the "original" factory installed "blue&Me" equipment, no other hardware can use or decode them.
On 2nd photo the 2 "red" button are only working with the original factory installed "blue&Me" equipment ad use to switch information on Factory Magneti Marelli multimedia/navigation unit during calls, with standard "simply" Alfa Romeo car stereo they are only working on charging disc from official CD Charger; no other hardware can use or decode them.
On some cases "non standard hard coded manufacturer swc" have funny responses; in my case Voice command button open the app carousel in my HU and the Open/close a phone call button activate the Mute function.
Check you Alfa Romeo Use and Maintenance Guide and Blue&Me User manual thaere was all the info provided by me.
So the other SWC are working like expected!
Click to expand...
Click to collapse
iRcKenny said:
Try long pressing the ones for "skip tracks/seek radio stations". My units acts like this. Try also all "Alfa Romes" canbus entries on Factory Settings
Click to expand...
Click to collapse
Long pressing not working, and I´ve tried to configure canbus tap but it not resolve de issue
Thank you again

Hi!!
My Alfa 159 works like yours, only 4 buttons are working. I had one unit android 5.1 before the 7.1.2 and everything from swc work.
If you have the solution please MP

Ruiroach said:
Hi!!
My Alfa 159 works like yours, only 4 buttons are working. I had one unit android 5.1 before the 7.1.2 and everything from swc work.
If you have the solution please MP
Click to expand...
Click to collapse
The seller send me a rom update, but I don´t sure to update the radio... Will it solve the problem or will it further damage it...
I can send you the rom if yo want it

moreno_cos said:
The seller send me a rom update, but I don´t sure to update the radio... Will it solve the problem or will it further damage it...
I can send you the rom if yo want it
Click to expand...
Click to collapse
I dont think it will make any difference, there is a way that MTCDTools can remap SWC on cars with CAN Bus, @ikerg can tell you how to do it or what thread its in.

typos1 said:
I dont think it will make any difference, there is a way that MTCDTools can remap SWC on cars with CAN Bus, @ikerg can tell you how to do it or what thread its in.
Click to expand...
Click to collapse
any ideas please?

moreno_cos said:
any ideas please?
Click to expand...
Click to collapse
pm @ikerg or search the forums, hes deffo mentioned how to do it on CAN Bus units before.

typos1 said:
pm @ikerg or search the forums, hes deffo mentioned how to do it on CAN Bus units before.
Click to expand...
Click to collapse
Found said posts and they were for car which communicate with resistive signals via canbus (or something ), so wiring the canbus from car harness directly to key1/2 gives access to the buttons.
If Alfa uses no resistive signals, you wont get away with this.
GM cars like mine have the buttons via hardcoded addresses via canbus and you can only try to find those codes in android or mod MCU profile it seems... too nub to do so in my case.. trying hard

Xorit said:
Found said posts and they were for car which communicate with resistive signals via canbus (or something ), so wiring the canbus from car harness directly to key1/2 gives access to the buttons.
If Alfa uses no resistive signals, you wont get away with this.
GM cars like mine have the buttons via hardcoded addresses via canbus and you can only try to find those codes in android or mod MCU profile it seems... too nub to do so in my case.. trying hard
Click to expand...
Click to collapse
Theyre not the posts I was talking about - pretty certain theres a way to programme CAN Bus SWC.
Alfa 159s have CAN Bus SWC.

I've had a similar problem with my Alfa 159 when I installed a PX3 unit. However, for me all the SWC buttons except the centre button on the left set work (i.e. pic 1) and only the left and right SWC buttons on the right set (i.e. pic 2). It is weird as the buttons that do not work mimic the other buttons for some reason so it's like crossing of signals or decoding it wrong.
As I didn't find anyone else having a problem I assumed it was either the CAN bus decoder (I opened it up and flipped switch 4 which helped I think but maybe it isn't suitable?) or the connection behind the steering wheel is loose. I haven't got round to checking the connection (apparently it's simple to open) as I can still control most things.
BTW, my car had the blue&me installed from factory.

SWC on Alfa Romeo 159
H all, I just installed a new Android head unit in my Alfa Romeo 159 SW (2006) and all the SWC's work and I can map them from the app. Below I will explain how I did it, hope this will help.
My head unit:
Xtrons TE706PL
PX 5 octacore 4GB 32BG Android 8
My car:
Alfa Romeo 159 SW
Upgraded from original radio (so not the navigation unit)
My car did not have Blue&Me
Required hardware:
Dedicated CANBUS adapter
Connect2 (company that make it) CTSAR002.2 (product number)
Patch lead to go with canbus adapter
Connect2 (company that make it) CTMULTILEAD.2 (product number)
I ordered both from Amazon Germany from seller NIQ. The patch lead was included with the CANBUS adapter, just make sure to select the correct one meant for Chinese head units. Price was 60 euros.
Installation
The CANBUS adapter is connected between the original car connections and the head unit. This looks confusing at first (it has connections on three sides), but in the end everything only fits one way. On one side connect the patch lead, on the other side it is connected to the head unit and on the last side it is connected to the original car plugs. All these connections are very simple with plugs that only fit one way. (I did need quite some force to push in the 2 of the 3 original plugs into the CANBUS adapter)
As mentioned, the patch lead is connected to the CANBUS adapter on one side. On the other side you need to connect it to the KEY 1, KEY 2 and GROUND wire coming from the head unit. This was the only connection that is not made with plugs, so either crimp them together (which I did, very simple, but you need a crimping tool), solder them, or make another good wire to wire connection.
Important notes:
The connection need to be made in a specific order!
First connect KEY 1, KEY 2 and GRND wires
Second connect the CANBUS adapter to the head unit
Last step is to connect the CANBUS adapter to the car connections
My car did not have Blue&Me, so I don't know if this changes anything. I think I read somewhere you can just leave it in the car and not connect it. But maybe do a little research.
All this is also specified in the manuals provided with the products. Connects2 has some nice youtube videos on the CANBUS adapters, just google them.
I did quite some research myself before I figured it out, but now all is installed and working perfectly! I reprogrammed all the keys to my own preferences, including google assistant speech activation button.
Hope this helps!

SJ1977 said:
H all, I just installed a new Android head unit in my Alfa Romeo 159 SW (2006) and all the SWC's work and I can map them from the app. Below I will explain how I did it, hope this will help.
My head unit:
Xtrons TE706PL
PX 5 octacore 4GB 32BG Android 8
My car:
Alfa Romeo 159 SW
Upgraded from original radio (so not the navigation unit)
My car did not have Blue&Me
Required hardware:
Dedicated CANBUS adapter
Connect2 (company that make it) CTSAR002.2 (product number)
Patch lead to go with canbus adapter
Connect2 (company that make it) CTMULTILEAD.2 (product number)
I ordered both from Amazon Germany from seller NIQ. The patch lead was included with the CANBUS adapter, just make sure to select the correct one meant for Chinese head units. Price was 60 euros.
Installation
The CANBUS adapter is connected between the original car connections and the head unit. This looks confusing at first (it has connections on three sides), but in the end everything only fits one way. On one side connect the patch lead, on the other side it is connected to the head unit and on the last side it is connected to the original car plugs. All these connections are very simple with plugs that only fit one way. (I did need quite some force to push in the 2 of the 3 original plugs into the CANBUS adapter)
As mentioned, the patch lead is connected to the CANBUS adapter on one side. On the other side you need to connect it to the KEY 1, KEY 2 and GROUND wire coming from the head unit. This was the only connection that is not made with plugs, so either crimp them together (which I did, very simple, but you need a crimping tool), solder them, or make another good wire to wire connection.
Important notes:
The connection need to be made in a specific order!
First connect KEY 1, KEY 2 and GRND wires
Second connect the CANBUS adapter to the head unit
Last step is to connect the CANBUS adapter to the car connections
My car did not have Blue&Me, so I don't know if this changes anything. I think I read somewhere you can just leave it in the car and not connect it. But maybe do a little research.
All this is also specified in the manuals provided with the products. Connects2 has some nice youtube videos on the CANBUS adapters, just google them.
I did quite some research myself before I figured it out, but now all is installed and working perfectly! I reprogrammed all the keys to my own preferences, including google assistant speech activation button.
Hope this helps!
Click to expand...
Click to collapse
Thanks for the info, but what unit do you have ? - "TE706PL" is a made up name, your MCU will tell us what unit it is, I m guessing a GS ?

typos1 said:
Thanks for the info, but what unit do you have ? - "TE706PL" is a made up name, your MCU will tell us what unit it is, I m guessing a GS ?
Click to expand...
Click to collapse
Sorry, I was not near my car, so couldn't find my MCU version. But here it is:
MTCE_GS_V2.88_3
Jun 12 2018 11:17:36

I have a PX5 and have the same issue.
I see people talking about their chinesses mtcd/e read all the can protocols (open doors, all the swc, radio info to main pannel...)
Talking to my seller, he told me that may be the can decoder. Offers me a refund but I want one that works 100%.
¿Someone have the full functional decoder?

bantroi said:
I have a PX5 and have the same issue.
I see people talking about their chinesses mtcd/e read all the can protocols (open doors, all the swc, radio info to main pannel...)
Talking to my seller, he told me that may be the can decoder. Offers me a refund but I want one that works 100%.
¿Someone have the full functional decoder?
Click to expand...
Click to collapse
More likely that its just not supported, some cars have even less support.

bantroi said:
I have a PX5 and have the same issue.
I see people talking about their chinesses mtcd/e read all the can protocols (open doors, all the swc, radio info to main pannel...)
Talking to my seller, he told me that may be the can decoder. Offers me a refund but I want one that works 100%.
¿Someone have the full functional decoder?
Click to expand...
Click to collapse
That's what Im trying to find, a canbus decoder with more options.
I had the alfa 159 android 5.1 unit and It shows temperature, doors and full keys function. I upgraded to a new unit android 7.1 and now I haven't temperature, doors and only half of keys are working.

Unable to setup on DASAITA PX6, CarPlay steering wheel phone functions buttons

Hello guys:
I am not able to setup the control wheel steering buttons for Phone functions ( pick up a call or end a call) on a DASAITA PX6 10.
On settings I selected CAN BUS
I setup the following commands:
- Increase/decrease Volume---OK
- Mode ( to swap between radio, AV, iPod...)---OK
- Next and previous song---OK
but when I setup the phone setting it is configured but on CarPlay doesn't work, I am no able to pick up the phone.
Any help???
Best regards

What does reseller suggest when contacted for support

My understanding is that there are two ways to connect these units to can bus.
One is with the external vehicle specific can bus boxes, which are not really programmable.
The second is with the key1/2 wires which is internal and are programmable through the key study. I have never used this method, so I know nothing about it... but you could try it.
If all else fails, you can try a PAC can bus adapter.
PAC – Connecting cars and technology. Your total installation solution.
pac-audio.com

Thanks for your replies.
I can program the keys. But what I am not able to program the phone function to work. I assign the functions to the buttons but it doesn’t do anything.
On the other hand the other buttons programmed (increase/decrease volume) works properly

CyrusMzRG said:
Thanks for your replies.
I can program the keys. But what I am not able to program the phone function to work. I assign the functions to the buttons but it doesn’t do anything.
On the other hand the other buttons programmed (increase/decrease volume) works properly
Click to expand...
Click to collapse
Did you setup the keys for just the Dasaita in the unit's settings, or have you also setup the keys in the ZLink app?
I had only done the former and had this problem when I first was trying CarPlay with the ZLink app. What you will need to do is open the ZLink App, without connecting your iPhone to the unit (put it in airplane mode, or leave it in the house far away from your car), then go to Settings within the app. There you will see options to assign the steering wheel keys to the various functions you want for your phone. Once it is all set, you will be able to control CarPlay exactly how you want.
Hope this helps!

SeaMonkey80 said:
Did you setup the keys for just the Dasaita in the unit's settings, or have you also setup the keys in the ZLink app?
I had only done the former and had this problem when I first was trying CarPlay with the ZLink app. What you will need to do is open the ZLink App, without connecting your iPhone to the unit (put it in airplane mode, or leave it in the house far away from your car), then go to Settings within the app. There you will see options to assign the steering wheel keys to the various functions you want for your phone. Once it is all set, you will be able to control CarPlay exactly how you want.
Hope this helps!
Click to expand...
Click to collapse
THANK YOU very much for your help. You solved the problem.
I entered that menu several times and I saw that mapping section but I forgot it completely
now everything is working fine
thanks a lot