Related
This is not my work; I am just placing it here so it can have its own thread. I have installed it on my xoom and it works flawlessly, enjoy!
1. As always make a back up before you do anything!
2. You must have working SDsupport to use this
2A. As a reminder you must be unlocked and rooted!
Install Instructions:
There are a few different ways to do this-
Option 1
1) Download ROM Manager (Free or Paid)
2) Download the zip from the link below
3) Move zip to your external SD card
A- Using a file explorer ( ex. Root Explorer), copy and paste the .zip file to your external sdcard (/sdcard/external)
OR
B- Put the zip on your SD card using your PC
4) Open Rom manager
5) Press the second button (Reboot Recovery)
Xoom will boot into recovery
6) Use volume rocker to select install zip from sdcard (Press power button to confirm)
7) Use volume rocker to select choose zip from sdcard
8) Select the zip file placed on the sdcard
9) Select yes
Xoom will flash file and put you back onto recovery screen
10) Select Reboot
11) Sit back and bask in the glory
Option 2
If anyone is having problems loading or installing this kernel to the root directory so it can be seen in clockwork mod do this:
boot into clockwork recovery by using quickboot or when you turn your xoom on quickly press the volume down rocker and it should ask whether you want to load android recovery then press volume down again and clockwork recovery should load.
In clockwork recovery go down to mounts/storage, then mount USB storage and click that and wait, in a min or so your computer should recognize the xoom and bring up the root directory, from there load the kernel on that root and click "go back" twice to the main menu and install the kernel using the install zip from sdcard/choose zip from sd card option. You can also extract boot.img from the zip file and flash using fastboot from your PC.
For those that want the most up to date info go here +Source can be found on Github- https://github.com/TDR/Xoom
Updated with new "c1" version
updated with the new 3g "D" kernel check it out
Updated with new Launchpad 3.1 Kernel and flashable zip for tun.ko support for those that want openVPN functions
Heard insane Mflops (67-69) and Quadrant results (4200 and over)!!!!!!!!!!!!!!!!!!!!
Hope that helps and if it has hit the thanks button
camblue said:
This is not my work, I am just placing it here so it can have its own thread. I have installed it on my xoom and it works flawlessly, however it broke my 3g. But I understand it works great on wifi xooms, enjoy!
http://forum.androidcentral.com/xoo...92-kernel-oc-kernel-xoom-honeycomb-3-1-a.html
Click to expand...
Click to collapse
Yep, posted in that thread, its working fine on my wifi xoom. I'll post it here too, not that benchmarks mean much!
65.291 linpack
4142 quad
Yeah this thing is xooming on wifi! I talked to TDR and he is working on a fix for 3G but while I had this on my xoom it was screaming! Will report back when he has a fix! But for now I am tempted to leave my 3g xoom on wifi LOL!
p2flol said:
Yep, posted in that thread, its working fine on my wifi xoom. I'll post it here too, not that benchmarks mean much!
65.291 linpack
4142 quad
Click to expand...
Click to collapse
I read the post on the other forum; but no information on it, is the cifs module inside and working?
Yes cifs.ko is installed and seems to be working
le_pere_noel said:
I read the post on the other forum; but no information on it, is the cifs module inside and working?
Click to expand...
Click to collapse
thanks for the answer:
Ok I test this Kernel Cifs working.
Last question Sd card is enable with this kernel ? I don't this netiher external or sdcard 2.
No problem glad to help
le_pere_noel said:
thanks for the answer:
Ok I test this Kernel Cifs working
Click to expand...
Click to collapse
le_pere_noel said:
thanks for the answer:
Ok I test this Kernel Cifs working.
Last question Sd card is enable with this kernel ? I don't this netiher external or sdcard 2.
Click to expand...
Click to collapse
From the TDR thread over at AndroidCentral:
This is forked from AOSP, but with some features like for micro SD support borrowed from Tiamat The kernel is configured differently, but everything you'd expect from Tiamat should be present (well, except for tun.ko) including the 1.504GHz clock speed.
Click to expand...
Click to collapse
yes, the sdcard works for me.
K, not working for me but it's not so important
awesome! Working well. 3713! Highest I've had yet.
Working great for me,
3346 on 1.2GHz
Sent from my Xoom using Tapatalk
Working great for me, 3987, fastest ever for me!!!! You rock!!!!
This works great on 3g Xoom as well. I've been running since last night with no problems OTHER than loosing 3g.
about to install this, will report back momentarily...
Works like a charm, no issues THANKS ALL
installed this late last night. sdcard is working for me. so far it's given me the highest quadrant scores and high linpack scores. every thing on the xoom seems to run a lot faster then before, even moreso then when i was on tiamat, but that's just my opinion.
4000+ on quadrant at 1.5ghz
62.5 on linpack
ran it on 1.5ghz for about three hours last night without a hitch but the xoom was getting a bit warm. running it on 1.4ghz as a daily driver.
Working great on my WIFI Xoom!
Hi, to use screenshot er properly, remove toasts for superuser or increase delay time!
Flashed and running well thx.
Well since I don't use my 3g, I should be fine, eh
This is a re-pack based on Catherall's own guide here: [GUIDE] Booting an Android System when only Recovery is at your disposal
The main difference from his copy (cyanogenmod 7.1):
- Google Apps (20110828) applied
- Updated to latest Google Play Store (3.7.15)
- update.zip modified to work on 4EXT Touch Recovery (ui disable)
Tested so far off of 4EXT Touch Recovery 1.0.0.5 RC5
What doesn't work and probably will never work unless someone makes new kernel modules for 2.6.35.10 (ie: the .ko files can be placed in the BootManager folder, and then have the init.d scripts edited to load those modules, but thus far none of them have worked for me because they were not built for that exact kernel, I don't know how to compile modules etc).
- Wifi [won't turn on]
- Bluetooth [won't turn on]
- everything else he mentioned in his first post regarding adb/etc
Made this as a new thread because his is quite stale, and catherall hasn't been seen in like forever. And kind of hoping that with the new progress maybe someone will take the time to write up some new gingerbread drivers for this purpose.
If I had the knowledge I would have ported an extremely lightweight Gingerbread Rom to it to be used as sort of a 'emergency-droid' rom, and recompiled kernel modules so that wifi/etc would work.
Instructions
Download the zip, unpack, copy BootManager and update.zip [zip can be renamed] to the SD card. Boot into recovery mode, run the update.zip to start up CyanogenMod 7.1 form the SD Card. (The original README is in the zip)
When you're in for the first time you'll notice the usual Google Apps setup screen, but it'll be in german. To change the language:
Press "Setup abschliben"
Press "Sprache ändern", select appropriate language
Continue the Google Apps setup as usual
It is advised that you do not allow it to automatically let it restore/install your apps as there will be no wifi connectivity and would be done over your data connectivity.
Download Boot_From_SD_wPlay.zip (~135MB)
md5sum : a352017b37bb546ffe0327bbe78304fe
Video from when I was first playing with it (after I put the 4EXT code in, but before I added gapps).
aaaaand another service from Kbeezie... you just can't stop can you?
thanks!
Is it possible to adjust the size of the internal storage? Make it 1g or larger?
Please tell me how if its possible...
Verstuurd van mijn HTC Vision
feejzor said:
Is it possible to adjust the size of the internal storage? Make it 1g or larger?
Please tell me how if its possible...
Verstuurd van mijn HTC Vision
Click to expand...
Click to collapse
You should be able to modify the the image sizes with BootManager (from the market).... as the free version doesn't see 'Rom8' (which this is mounted), you would have to copy the contents of BootManager/Rom8 to BootManager/Rom1, adjust the image size to 1gb or whatever you wanted... then boot to cwm/4ext mount usb, and use your pc to copy the contents of Rom1 to Rom8 (keep a copy of the original Rom8 somewhere as a backup if it fails)
Never tried it, but it works in my head!
Hope it helps.
Is there anyway to make this permanent so that every time i turn on or reboot the phone, it boots from SD card ?
I use
fastboot boot boot.img
from cmd and after that wifi works and bluetooth works in case anyone is interested
00sand00 said:
I use
fastboot boot boot.img
from cmd and after that wifi works and bluetooth works in case anyone is interested
Click to expand...
Click to collapse
Nice finding! Anyway, can I ask you what boot.img file did you use?
Sent from my HTC Vision using Tapatalk 2
Mehrdad96 said:
Is there anyway to make this permanent so that every time i turn on or reboot the phone, it boots from SD card ?
Click to expand...
Click to collapse
This is unlikely without also writing some kind of bootloader on the internal memory to launch from the SD... which of course would require that the internal memory were not in some way damaged. So kind of a catch-22 to what you're asking. Shouldn't be using SD booting as a permanent solution, it's more like a way of still being able to do *some* things while you work out on getting the phone replaced.
And here I thought you and all your work was gone, nice to see ya around kbeezie!
Sent from my SGH-T839 using Tapatalk 2
Can someone please re-upload zip?
Anyone?
Sent from my GT-I9105P with RESURECTION REMIX KK 5.0.8
Subinmanaladil Rom for Redmi 1S FINAL RELEASE!
This is a rooted and optimzied version of MIUI V45(Now based on Adria Rom as I like its features) that gets rid of the heating issues and increases performance. Its absolutely smooth!!!!
This will be the final release. There are no bugs present. Enjoy!
Changes made over Adria Rom:
1. Uninstalled some unnecessary Apps.
2. Odexed the whole rom for speed and battery Life.
3. Optimized system with pureperformance and ram management patches
4. Puregraphics engine for better graphics
5. Added my own improved thermal config for lagless heating control.
6. Added a cool screen off animation and other apps usefull for redmi 1s.
7. Many more minor optimizations
Change log for R2
1. Added TheNewPureAudioEngine - Audio quality is much better now
2. Fixed permissions for odex files, works better and reboot times are reduced.
3. Got rid of xextstorage app as it was causing problems.
4. Link2sd integrated for unfreezing certain apps
I AM NOT RESPONSIBLE FOR YOU BRICKING YOUR PHONE OR IF YOUR PHONE CATCHES FIRE OR THE ALARM DOESNT RING ON TIME AND YOU LOSE YOUR JOB. USE THIS AT YOUR OWN RISK.
DO NOT APPROACH ME IF YOUR PHONE SLOWS DOWN AFTER YOU RESTORE APP DATA WITH TITANIUM BACKUP. DO IT CLEAN
Click to expand...
Click to collapse
Instructions(FINAL RELEASE)
1. Install Custom TWRP Recovery
Get it from this thread
http://en.miui.com/thread-43304-1-1.html
1. Download the flashable build, place in root folder of internal sd.
2. Go to system "settings", go to "about phone" at bottom, click "system update"
4. Click menu button and select "select update package" and browse and select TWRP 2.8.02.ZIP
5. Once flashing is done, reboot into recovery by pressing volume up+ power button after turning phone off. If it doesnt work, try flashing by above method again
2. Download and Unzip the backup
1. Download all 4 files from this link(389 mb total. 97 mb each)
https://www.mediafire.com/folder/c7ch9w7shqao6/Redmi_1S_Rooted_Rom_Subinmanaladil
2. Put all files in same folder and extract ONLY the file "Subinmanaladil Rom Redmi 1S FINAL RELEASE.zip.001". If you cant open it, get 7zip
http://www.7-zip.org/
3. You should now get a folder named "Subinmanaladil Rom Redmi 1S FINAL RELEASE".
4. Reboot into recovery and select backup, swipe to start creating a backup. When backup process starts, press down power button until phone restarts. Using a file manager, go into TWRP-BACKUP-"folder with random name". Here you should paste above extracted folder.
5. Reboot to recovery click restore and select "Subinmanaladil cusotm MIUI Rom Redmi 1S" Change location from internal storage to external storage according to weather your backup fodler is in internal or external sd.
3. Setup
1. Click security app in home screen. Select Permissions. Now enable root permissions. Disable permission manager.
2. Go to settings--toolbox---wsm tools. Install the framework and enable greenify, screen animation modules
3. Add apps like facebook and messenger to greenify list and setup auto reboot app to keep phone running smoothly
4. Turn on init.d in universal init.d app and reboot.
5. Charge from 2% to 100% and leave it on charger for 20 minutes extra. Do this about 3 times before you can get good battery life.
6. (OPTIONAL) I disabled limiting background process in battery option in settings. This setting causes apps to not sync. This happens in stock rom too. Doing this can decrease battery and icnrease heating but it works fine for me.
Antutu Benchmark and Battery Stats attached
CREDITS:
@BalcanGSM for the amazing Adria Rom.
@Jeeko for the amazing pureperformance script(I hope he updates it for kitkat)
@fivefour for crossbreedor script used in pureperformance(I tried pureperformance originally because it had crossbreedor integration)
@Ch02 For pointing out instructions at which people were likely to get confused.
@ whoever that made the stuff for root and recovery. I am not sure who all.
Have fun
Been using with this setup for some time now and there are absolutely no heating issues. No other problems either. No apps or music player force close.
Gonna consider patching services.jar soon
subinmanaladil said:
I was experiencing heating and battery issues on this device. I decided to root the device and added a few modifications that seem to have magically cured the problem. The phone now heats less than a samsung device. Seriously major difference.
The phone also got a whole lot faster and smoother.
1. Root Your Phone
This method is from the following link:
U can unroot easily and get OTA Updates and obtain warranty by following instructions in that link. Below is the procedure to root.
1. Download the file update.zip to your PC (because download via browser on phone often is not working properly)
2. Connect your Redmi 1S via USB
3. Copy the file update.zip to the folder 'Computer\HM 1S\Internal storage' (root of internal storage, meaning the top most folder)
4. Disconnect your Redmi 1S properly from USB (use 'Safely Remove Hardware and Eject Media' from USB icon in Windows SysTray)
6. Boot into Mi-Recovery (for this launch the Updater app, press the menu/options button and from the menu choose 'Reboot to recovery mode')
7. In the Mi-recovery select and confirm 'English' (or Chinese if you are capable to understand)
8. Select and confirm 'Install update.zip to System', this will take one second
9. Select and confirm 'Reboot'
10. After reboot go to Security -> Permission and activate Root permission
11. Enjoy your rooted Redmi 1S
2. Uninstall unnecessary software
Taken from the following link:
List of apps that can be safely Freezed to free up the RAM
I use link2sd from play store to freeze apps. Just select an app and click on actions and select freeze option. you can also use app quarantine
https://play.google.com/store/apps/details?id=com.ramdroid.appquarantine&hl=en
ANT HAL Service
Browser (Using Crome)
Drive
Facebook
Flipkart
Google Hindi Input
Google Pinyin Input
Google Play Book
Google Play Movies
Google Play Music
Google Play Newsstand
Google+
Google Search
Hangouts
Mail
Mi Cloud (Required for themes)
MiTalk
Play Games
SIM Toolkit
Sync with Mi Cloud (Required for themes)
Updater (Needed to update firmware)
Video Player (using MX player)
Xiaomi Assistant
3. Install Universal init.d app by Androguide.fr from Play store and enable init.d support in the app
4. Install Custom CWM Recovery
1. Download attached file "signed_cwm_update redmi.zip"
2. rename it to update.zip and paste in root folder of internal storage.
3. Go to settings, then to about phone and click system update button
4. Press menu button adn press "reboot to recovery"
5. Select language English and then select flash update.zip option.
6. When done, turn phone off, press volume up+ power until you enter cwm recovery
5. Install the performance mod
1. Download pureperformance for CM from this link
http://forum.xda-developers.com/showthread.php?t=2360670
2. Put it in your external sd card's root folder.
3. Boot into cwm recovery, make a backup
4. Flash pureperformance mod and reboot
6. Change ram manager script(optional)
I just find this ram manager to be better
1. Download fly on mod from following link
http://forum.xda-developers.com/showthread.php?t=2226373
2. Extract the zip file, browse to etc/init.d folder in it and copy the ram manager file to root folder of sd card
3. Use root browser from palystore and copy this file from sd card nad paste it in etc/init.d folder of your phone(not the extracted folder of the zip file)
4. Delete ram_optimize script
I think we have to patch services.jar for ram maanger ot work but i am not sure. Will update with instructions if i do so.
Thats it. Just wait 15 minutes for system to settle down. Additionally you can go to developer otpions and put animation speeds back to normal and reboot one more time. I did this much and all my heating issues are gone! Absolutely no heating even while gaming!!! I didnt even underclock! Its like a magical fix guys!!! I was amazed. The performance has increased phenominally too. MIUI should hire jeeko or exit_only for working on their performance front. I think exit_only made the ever amazing crossbreedor script.
I am also getting great great battery life and speed. I am 100% happy with this phone now. I have noticed in this hsort time that battery charging time has drastically decreased too. Phone doesnt heat much during charging either. :laugh:
NOTE: If you are still unhappy with battery life or the slight heat, then install No frills CPU from play store and put min frequency to 300 and max frequency to either 1.4 or 1.19 and test. That reduces heating too. Also check apply on boot. Also go to security app in desktop and click on power(the one that has antivirus and cleaner in it) and select default and change cpu mode to power saving and then click ok. Now select apply for default setting. I didnt need this.
CREDITS:
@Jeeko for the amazing pureperformance script(I hope he updates it for kitkat)
@fivefour for crossbreedor script used in pureperformance(I tried pureperformance originally because it had crossbreedor integration)
@ whoever that made the stuff for root and recovery. I am not sure who all.
Have fun :laugh:
Click to expand...
Click to collapse
Thanks for the post. I am also face the same issue. While i start to apply the points you mentioned, unable to identify the 'Computer\HM 1S\Internal storage. Please let me request you to post with some snap shot to understand the points easily to recover from this issue of heat and battery issue.
Thanks & Regards,
Saravanan
bsshare said:
Thanks for the post. I am also face the same issue. While i start to apply the points you mentioned, unable to identify the 'Computer\HM 1S\Internal storage. Please let me request you to post with some snap shot to understand the points easily to recover from this issue of heat and battery issue.
Thanks & Regards,
Saravanan
Click to expand...
Click to collapse
Dont quote the whole OP.
If you havent inserted sd card, then ur only storage is internal storage. that is what is meant. you can open using explorer. Paste in root of internal storage
Thanks for your reply regarding my query.
Please don't mistake me to ask again the same question. It's my first smartphone, so i unable to know in depth about android.
You had mention to store in internal root.
While i connect my phone with my system i get the following folders in my phone, Android,Bluetooth,data,DCIM,Document. Inside android two folder in the name of data and obb. Please let me know where i store the "Unrootnative_Redmi1S.zip and the other two file Update.zip and signed_cwm_update_redmi.zip.
I am not installed any game apps and heavy files. For my business purpose added some 6 apps in my phone and out of this i use very limited period. But the charge with 100% in the morning drain to bellow 10% before evening. If i speak more then 10 min feel the heat very much in my ears.
Please help me to solve this issues.
Thanks & Regards,
Saravanan
bsshare said:
Thanks for your reply regarding my query.
Please don't mistake me to ask again the same question. It's my first smartphone, so i unable to know in depth about android.
You had mention to store in internal root.
While i connect my phone with my system i get the following folders in my phone, Android,Bluetooth,data,DCIM,Document. Inside android two folder in the name of data and obb. Please let me know where i store the "Unrootnative_Redmi1S.zip and the other two file Update.zip and signed_cwm_update_redmi.zip.
I am not installed any game apps and heavy files. For my business purpose added some 6 apps in my phone and out of this i use very limited period. But the charge with 100% in the morning drain to bellow 10% before evening. If i speak more then 10 min feel the heat very much in my ears.
Please help me to solve this issues.
Thanks & Regards,
Saravanan
Click to expand...
Click to collapse
Put it in that location itself. You dont need to enter any of the folders like android nad bluetooth. Batteryw ill improve tremendously with 5-7 charging cycles. drain to 2, charge to 100% and keep plugged in for half an hour additional
xiaomi redmi 1s ( india )
subinmanaladil said:
I was experiencing heating and battery issues on this device. I decided to root the device and added a few modifications that seem to have magically cured the problem. The phone now heats less than a samsung device. Seriously major difference.
The phone also got a whole lot faster and smoother.
Click to expand...
Click to collapse
heyy thanks for guide
i was wondering if you can write a full post regarding same ( with addition of info a\bout other roms , like mokee etc )
and make it more simpler for first time users
also i was wondering if the xda community ( be it you ot linuxxx or others contributing to Mi devices) have a group and presence on xiaomi official fourms and guide the people there too
a
zohansinha11 said:
heyy thanks for guide
i was wondering if you can write a full post regarding same ( with addition of info a\bout other roms , like mokee etc )
and make it more simpler for first time users
also i was wondering if the xda community ( be it you ot linuxxx or others contributing to Mi devices) have a group and presence on xiaomi official fourms and guide the people there too
a
Click to expand...
Click to collapse
I have posted this guide on MIUI forums too.
Am not an expert, just put together things that I know. I never tried any other custom OS because I bought this phone with MIUI software features in mind.
I tried patching services.jar but it gave me erros such as all apps crashing if i wiped dalvik cache and newly installed apps seemed to not open. So it has been dropped
Nice
Sent from my HM 1SW using XDA Free mobile app
Installing CWM means loss of warranty right????? And also we cant unroot and get OTA updates????? Correct me if m wrong......... And what will happen if i skip CWM step???
great tips
Really the tips you had share with us is working fine.
Yes, the phone can be returned back to stock just by following unroot instructions.
I have updated original post with a better guide and more instructions :good:
I flashed the pure performance script following your instructions and also underclocked the
CPU which helped to reduce heating...but battery life remains as it was..I ran a benchmark after turning back the clock speed to maximum and cpu to high performance in the security app,I get scores lower than stock ROM..
Any thoughts??
And also can you provide a guide to turn back the phone to stock.
Sent from my HM 1SW using XDA Free mobile app
bobinx said:
I flashed the pure performance script following your instructions and also underclocked the
CPU which helped to reduce heating...but battery life remains as it was..I ran a benchmark after turning back the clock speed to maximum and cpu to high performance in the security app,I get scores lower than stock ROM..
Any thoughts??
And also can you provide a guide to turn back the phone to stock.
Sent from my HM 1SW using XDA Free mobile app
Click to expand...
Click to collapse
In my experience, underclocking doesnt seem to really get rid of heating. Am not sure but I get best experience at 1.6 Ghz itself.
The guide has been updated with a major improvement of ram management with the services.jar patched. Make sure you do that step too. :good:
For me, underclocking does reduce heating...
And about the battery status screenshot you have provided... I get such battery life only when I am sleeping. The battery drops like 1 percent/min with just whatsapp and data on
And I get 416 mb ram in stock ROM without modding..just that it get reduced to around 250mb when I am using my fone..
Your screenshot shows that screen uses less power than android system...in my experience, it is not possible unless you use the phone just for fone calls...as redmi has a 720 p display which definitely uses a lot of power
Can u give us some info about how you use your phone...
And y patch services.jar??
Sent from my HM 1SW using XDA Free mobile app
a
my battery is draining 20% per 50 minute . . . . :'( and i dont have pc to do all the steps
U need pc only for patching services.jar
Sent from my HM 1SW
Possibly a stupid question, but in step 6, why do you recommend downloading PurePerformance for CM if we are running stock MIUI 41.1 Rom? Just want to be sure what I'm flashing.
Thanks a lot for the instructions. Few questions from my side if you can help that will be great.
Will I be able to update the phone when a new firmware is released?
What will happen with this workaround once you install an update, do you need to start again from start?
does anyone have patched service.jar and framework.jar for MIUI Global 4.1 ?
because i have dificulty tu run ultimatic jar patcher tool on my win 8 x64 environment
Hi, just to share with you!
Whats this? In short, it is deodexed -> resigned -> zipaligned, installed busybox, supersu, dual recovery (vol up for twrp, vol down for cwm), 5way reboot menu ...and some other changes which you can read about it here -> https://github.com/munjeni/D5503_14.5.A.0.242/commits/master .
How to download rom:
- go to here -> https://github.com/munjeni/D5503_14.5.A.0.242/tree/ae7b18de7faa97eaf01eff1c2b6abeb540feaf6f and on the right side you have "Download zip"
- after downloading rom is not ready, do not flash!!!
How to install:
- after you download rom you must repack zip since git always add things into new folder inside zip so you will need repack it first before installing!
- simple open main zip and go to folder "14.5.A.0.242.master", select all files from these folder, drag and drop it to a new empty zip, you are done. Before you flash rom please read "iportant" section! Flash these new zip with any recovery. Done.
Mirrored download link (using this you no need to repack anything, just download and install!):
- https://mega.co.nz/#!Co1yERia!eJVCBjTZrjXok3KXZxM9xp_28I9Pos-LPYKjigJ6Bok
Important:
- you must fully wipe /data partition (mean delete everything from /data folder)! Or another solution, flash only userdata from any LolyPop ftf! Why? Because all old files from internal storage is not relabeled and you will encounter a lot of problems and all these files can not be accessed from android, pictures, private files... etc is not accessible than! Don't think it will work without wipe, it will not! Wioe data factory reset have no sense, I recomend installing userdata from ftf since its more a safe way!
Changelog:
- https://github.com/munjeni/D5503_14.5.A.0.242/commits/master
Enjoy!
munjeni said:
Hi, just to share with you!
Whats this? In short, it is deodexed -> resigned -> zipaligned, installed busybox, supersu, dual recovery (vol up for twrp, vol down for cwm), ...and some other changes which you can read about it here -> https://github.com/munjeni/D5503_14.5.A.0.242/commits/master . Curently I am stoped development on this rom since I am unable to solve thing like this -> lolipop have two classpaths (BOOTCKLASSPATH and SYSTEMSERVERCLASSPATH) and I not understand how to access classes from one classpath to another classpath, if you have idea how I can get this than I will probably continue development. My plan was implementing privacy guard rom cm12 but since I have problem accessing classes I am temporary stoped
How to download rom:
- go to here -> https://github.com/munjeni/D5503_14.5.A.0.242 and on the right side you have "Download zip"
- after downloading rom is not ready, do not flash!!!
How to install:
- after you download rom you must repack zip since git always add things into new folder inside zip so you will need repack it first before installing!
- simple open main zip and go to folder "14.5.A.0.242.master", select all files from these folder, drag and drop it to a new empty zip, you are done. Flash these new zip with any recovery. I have made some automated scripts so you no need to wipe anything since everything needed will be done auto so just click "install" and wait until rom get installed.
Enjoy!
Click to expand...
Click to collapse
Flashed this ROM and it is amazing.
Debloated it, installed some mods like xposed, xposed fix, modded services.jar for superuser mode, modified mixer_paths.xml for more loudness and some apps like MyAndroidTools, TitaniumBackup, Greenify.
Works like a charm and good battery life.
Only thing is the aweful toogle change by Google (no silent, vibrate toggle on quick settings) - but this depends NOT on your ROM.
Thx munjeni (one more time) for your time, work and effort.
m.
Investigated and got solution for 5 way reboot menu
Where you got moded services with superuser mod? I wanted to start porting it from cm12 but if it is allready exist I will be glad to look into it
munjeni said:
Investigated and got solution for 5 way reboot menu, you can download from here (just download android.policy.jar and replace) -> https://github.com/munjeni/D5503_14.../system/framework/android.policy.jar?raw=true enjoy
Where you got moded services with superuser mod? I wanted to start porting it from cm12 but if it is allready exist I will be glad to look into it
Click to expand...
Click to collapse
http://forum.xda-developers.com/sony-xperia-z1-compact/themes-apps/mod-accent-systemui-t3088719
moonryder said:
http://forum.xda-developers.com/sony-xperia-z1-compact/themes-apps/mod-accent-systemui-t3088719
Click to expand...
Click to collapse
I have no idea why it is caled SuperUser Mod since it have nothing related to SuperUser. It is just SignatureDisable mod, author stupidly gave these name to these mod which apsolutly have nothing related to superuser If you look into commits on my git you will notice that you no need his services.jar since my rom allready have disabled signature verification, I not guarant you how his services is patched, but I can sugest you to replace services.jar whith one from my rom since compatibility is guaranted
This http://www.androidauthority.com/cyanogenmod-12-superuser-577985/ is what I call superuser mod (I have plan to port it here), and diferencie between "wrongly named" superusermod and real superusermod like one from cm12 is like this and this
munjeni said:
...and diferencie between "wrongly named" superusermod and real superusermod like one from cm12 is like this and this
Click to expand...
Click to collapse
LOL
Ok bro will wait for a "real" PrivacyGuard for LP 5.0.2, modded by the master munjeni itself
When trying to install an app from sd card, I am getting out of space message, can't install apps from sd card
btw.. already wiped everything, and system storage shows correct info
nemphis said:
When trying to install an app from sd card, I am getting out of space message, can't install apps from sd card
btw.. already wiped everything, and system storage shows correct info
Click to expand...
Click to collapse
Hi, I have noticed the same thing, but I don't know if it is related to lolipop in general! Anybody confirm on stock unmodified rom?
I can install apps from sdcard [emoji18]
But I am unable to download some apps from playstore
munjeni said:
Hi, I have noticed the same thing, but I don't know if it is related to lolipop in general! Anybody confirm on stock unmodified rom?
Click to expand...
Click to collapse
NO problems here, i can install apps from sd card am on stock rooted lollipop with unlocked boot-loader.
I'll wait for another simplified flashable version of your rom.
Thanks @munjeni for this release !
Will give a shot tonight when everybody is sleeping
Question : Can i remove some elements ( unuseful app for my usage when repackaging rom ) regarding your install script ?
Thanks mate !
Freshly installed and everything is perfect ! Thank you very much brah !!
D5503 UB Dstriker ROM KK.157
Winb33 said:
Thanks @munjeni for this release !
Will give a shot tonight when everybody is sleeping
Question : Can i remove some elements ( unuseful app for my usage when repackaging rom ) regarding your install script ?
Thanks mate !
Click to expand...
Click to collapse
i tried that and / or replaced some things like bootanimation, fonts etc.
Flashing failed, so flash it untouched and remove / add things then.
pathaniya said:
NO problems here, i can install apps from sd card am on stock rooted lollipop with unlocked boot-loader.
I'll wait for another simplified flashable version of your rom.
Click to expand...
Click to collapse
I'm trying to solve this but have no idea how to do it, it is selinux restriction (if somebody have idea how it can be solved let me know please), but temporary solution is: via terminal emulator disable selinux, than install app, than enable selinux. To disable selinux write "setenforce 0", than install app, than enable selinux "setenforce 1"
Winb33 said:
Thanks @munjeni for this release !
Will give a shot tonight when everybody is sleeping
Question : Can i remove some elements ( unuseful app for my usage when repackaging rom ) regarding your install script ?
Thanks mate !
Click to expand...
Click to collapse
You can but only if you propertly remove lines from updater-script since it is hardcoded with our rom, instead recovery will abort installation if you missed something in updater-script ! My sugestion is, remove things manualy using an root file explorer, or at least add some lines in updater script which will remove things that you want
munjeni said:
Hi, I have noticed the same thing, but I don't know if it is related to lolipop in general! Anybody confirm on stock unmodified rom?
Click to expand...
Click to collapse
First when installed FR version same problems with SD card. Also ESexplorer had problems accessing SD card
Now on stock rooted works everything fine related to SD card.
Run also SDfix app becouse Titanium problem
Sent from my D5503 using XDA Free mobile app
EasySR said:
First when installed FR version same problems with SD card. Also ESexplorer had problems accessing SD card
Now on stock rooted works everything fine related to SD card.
Run also SDfix app becouse Titanium problem
Sent from my D5503 using XDA Free mobile app
Click to expand...
Click to collapse
No man, you no need sdcard fix. I allready included sdcard fix https://github.com/munjeni/D5503_14.5.A.0.242/commit/21b396daf721791c3675de417c543ba6184e21d1 and you can read / write any storage without problems, but we speak about problem related to the "installing apps from sdcard"! For example, if you try to install blablabla.apk which is on any storage you will get "no free space" error since selinux DENIED installing it, I don't have idea why it happen since I am not familiar with selinux, only very basic things by now. I will try to solve this problem!
munjeni said:
No man, you no need sdcard fix. I allready included sdcard fix https://github.com/munjeni/D5503_14.5.A.0.242/commit/21b396daf721791c3675de417c543ba6184e21d1 and you can read / write any storage without problems, but we speak about problem related to the "installing apps from sdcard"! For example, if you try to install blablabla.apk which is on any storage you will get "no free space" error since selinux DENIED installing it, I don't have idea why it happen since I am not familiar with selinux, only very basic things by now. I will try to solve this problem!
Click to expand...
Click to collapse
Just installed app on stock rooted lolipop (3G Watchdog) from SD card
Sent from my GT-P5110 using XDA Free mobile app
Hey guys, I'm having a hard time installing xposed installer, I get "not enough space" error. Could any of you help out a fellow user..?
D5503 UB Dstriker ROM KK.157
EasySR said:
Just installed app on stock rooted lolipop (3G Watchdog) from SD card
Sent from my GT-P5110 using XDA Free mobile app
Click to expand...
Click to collapse
Ok thanks for info. On my rom selinux must be disabled temporary before installing any app from sdcard, than enabled. I will try to understand why it happening. For sure it is related to selinux. I replaced platform key in selinux_policy.xml since all apks on our rom is resigned and zipaligned but it was not solved problem related to the installing apks from sdcard.
Hello!
Well, basically my problem is when I try to move an app to /system/app.
I am user of GPS spoofers and today I've unlocked my bootloader, flashed latest twrp by @Alberto97 and followed this thread to use Magisk:
https://forum.xda-developers.com/moto-z-play/how-to/how-to-safetynet-7-1-1-update-stock-rom-t3669086
I'm using Nougat 7.1.1 security patch December 1.
As I use GPS spoofers, I wanted to move GPS Location app to /system/app to do not use mock locations, and then hide Magisk to play Pokemon go, but every time I tried to move it to system with Link2sd, after trying, it was just showing the following error when I tried to to move the app to system:
"mount '/dev/block/dm-0'- '/system' device or resource busy"
I really don't want to downgrade to MM to try to move it, and maybe if I downgrade, the problem will not be fixed too... So, can anyone help me with it? I really want to move it to system, and I don't know what to do, I'm really new with this error.
Thanks, hope you help me!
/system write is disabled when the device is turned on, security
Use twrp. First mount /system in the mount menu, then advanced and file manager to move it from /data/app to system
And maybe it also needs to go to /system/priv-app, but I am not sure about that
user822 said:
/system write is disabled when the device is turned on, security
Use twrp. First mount /system in the mount menu, then advanced and file manager to move it from /data/app to system
And maybe it also needs to go to /system/priv-app, but I am not sure about that
Click to expand...
Click to collapse
So, I need to go to mount menu of twrp, mount /system, go to advanced, file manager and search all the app folder or just .app(?) And move it to /system/app(or just /system?) And also copy(or move?) It to priv-app?
xdaVTU said:
So, I need to go to mount menu of twrp, mount /system, go to advanced, file manager and search all the app folderAnd move it to /system/app
Click to expand...
Click to collapse
Yes, there should be a folder in /data/app/ that has the right name
xdaVTU said:
And also copy(or move?) It to priv-app?
Click to expand...
Click to collapse
Yes, move the folder to /system/app
Only if then the app does not work, try to move it to /system/priv-app instead
user822 said:
Yes, there should be a folder in /data/app/ that has the right name
Yes, move the folder to /system/app
Only if then the app does not work, try to move it to /system/priv-app instead
Click to expand...
Click to collapse
So after doing that, will I need to use Link2sd to something or your tutorial is enough?
xdaVTU said:
So, I need to go to mount menu of twrp, mount /system, go to advanced, file manager and search all the app folder or just .app(?) And move it to /system/app(or just /system?) And also copy(or move?) It to priv-app?
Click to expand...
Click to collapse
xdaVTU said:
So after doing that, will I need to use Link2sd or lucky Patcher to something or your tutorial is enough?
Click to expand...
Click to collapse
No that makes an app into a system app, that is all
user822 said:
No that makes an app into a system app, that is all
Click to expand...
Click to collapse
thank you for the help, but... Everything was okay until I test the app, i don't know if you use this kind of app, but when I moved it to system/app it should allow me to access the system functions. As the attached image shows, I cannot access it yet, but it's already in /system/app.
Please dude, help me, i really want to use this functions
Edit. And when i try to convert the app to a user app, link2sd show me the error showed by the error image.
First: never EVER even mention LP anywhere. It is strictly forbidden to even mention it, it's warez since you can crack Apps with it to not have to pay while still using paid functions, please all edit your posts!
Second: you are using Magisk @xdaVTU. So learn to use its full potential! Magisk was made to make changes especially to /sytem without actually changing that partition in order to allow OTA updates since they would scan partitions like the system partition which are cryptographically secured. If they where even mounted r/w the update will abort.
So if you want to make changes to /system, just make a module or use existing ones, it's actually very easy. In your case there should be a module in manager called app systemizer (or something like that, haven't used Magisk in about a month), that should do the job.
But in general, you can simply "write" your own module, you don't need much for that. Just get the module template from github, it should be linked in the Magisk release thread. Unzip it. open the module.prop in a text editor and edit it how you want (only the text behind the = signs, very self explainatory). Save it. Then open the folder "system" and create the sub-folder app (or priv-app) and inside create some folder for the app. Put the apk file of the app you want to install in /sytem/app/foldername inside. At the end, put everything back into a zip file (the folders common, META-INF and system together with the files. Make sure it's a simple zip file thats not encrypted and that inside the files and folders aren't inside another folder (which is the case when you download the zip from github) otherwise it will fail to install. Then just install your new zip through the Magisk Manager or TWRP and done. Everyting should work now.
@Artim_96
I'm sorry for that, I'll edit the posts.
About the Magisk, I don't know how does it work fully, and would like just to use that GPS as a system app, so I would need a little help for that. I didn't understand anything about the modules, and the only reason I'm using Magisk than SuperSU is because I've seen some users saying SuperSU wasn't stable in Nougat and they've got into bootloop...
Is this security of just Nougat or marshmallow also have it?
Should I use SuperSU instead of Magisk for that?
Please help me with it.
Ah, one more question, should I downgrade to Marshmallow to get it to work?
xdaVTU said:
@Artim_96
I'm sorry for that, I'll edit the posts.
About the Magisk, I don't know how does it work fully, and would like just to use that GPS as a system app, so I would need a little help for that. I didn't understand anything about the modules, and the only reason I'm using Magisk than SuperSU is because I've seen some users saying SuperSU wasn't stable in Nougat and they've got into bootloop...
Is this security of just Nougat or marshmallow also have it?
Should I use SuperSU instead of Magisk for that?
Please help me with it.
Ah, one more question, should I downgrade to Marshmallow to get it to work?
Click to expand...
Click to collapse
I already told you what to do. Just do one of the two things
Artim_96 said:
I already told you what to do. Just do one of the two things
Click to expand...
Click to collapse
As I said, I didn't understand
xdaVTU said:
As I said, I didn't understand
Click to expand...
Click to collapse
Just read. I told you just use app systemize, it will do the job
Artim_96 said:
I already told you what to do. Just do one of the two things
Click to expand...
Click to collapse
Artim_96 said:
Just read. I told you just use app systemize, it will do the job
Click to expand...
Click to collapse
I forgot to Tell you, i tried to use systemizer but i dont know what happened, It failed when I tried to install It with magisk
xdaVTU said:
I forgot to Tell you, i tried to use systemizer but i dont know what happened, It failed when I tried to install It with magisk
Click to expand...
Click to collapse
That's something for the Magisk forum. Otherwise try terminal app systemizer too.
Artim_96 said:
That's something for the Magisk forum. Otherwise try terminal app systemizer too.
Click to expand...
Click to collapse
As i just want to move an app to /system/priv-app(yes, priv-app), can I just use TWRP terminal and move it? Without rooting my phone neither with magisk nor supersu? Or it isn't gonna work?
xdaVTU said:
As i just want to move an app to /system/priv-app(yes, priv-app), can I just use TWRP terminal and move it? Without rooting my phone neither with magisk nor supersu? Or it isn't gonna work?
Click to expand...
Click to collapse
It will work, but keep in mind you won't be able to make OTA updates. So if you want to update your firmware you'll probably have to use either Motorola device manager or manually flush it through RSD lite. Using Magisk should give you root, it's huge possibilities and still keep OTA updates working. But with Motorola devices it's a bit of work to get it to work because there is a bug in the kernel for years now
I don't have sure if its gonna help because is a little complicated to do, i don't have sure if its gonna work with newer versions of magisk or the way that you installed because some module won't work in the way that you install but you can try this. I used some time ago in aosp rom maybe works on stock too
https://forum.xda-developers.com/apps/magisk/module-smali-patcher-0-7-t3680053
This gonna allow fake location without selection on settings or put app in systen
@Artim_96 @jst98 @user822
Thank you all for helping me, mainly Artim and user, because with user's help I learned that tarp also can make some system modifications with file manager, but it seems to need root as well(I'm not sure about that actually), and Artim, you really helped me with those things about magisk modules. I've just flashed nougat 7.0, then I flashed twrp 3.0.2-0 and flashed magisk, it works very well!
And I found a kernel download link that really worked for me, with magisk modules(systemizer and appsystemizer) I could do what I wanted to.
Everything is working now, but I'd like to know if that f2fs fix kernel really works.. When I was using 6.0.1, I downloaded the kernel fixed for that Android version, but I just caused me a bootloop, so now I'm afraid about trying the 7.1.1 version...
xdaVTU said:
@[email protected]@user822
Thank you all for helping me, mainly Artim and user, because with user's help I learned that tarp also can make some system modifications with file manager, but it seems to need root as well(I'm not sure about that actually), and Artim, you really helped me with those things about magisk modules. I've just flashed nougat 7.0, then I flashed twrp 3.0.2-0 and flashed magisk, it works very well!
And I found a kernel download link that really worked for me, with magisk modules(systemizer and appsystemizer) I could do what I wanted to.
Everything is working now, but I'd like to know if that f2fs fix kernel really works.. When I was using 6.0.1, I downloaded the kernel fixed for that Android version, but I just caused me a bootloop, so now I'm afraid about trying the 7.1.1 version...
Click to expand...
Click to collapse
Of course you need the Kernel matching your Android version.
There also is a Magisk module that's supposed to fix it, but I don't know if it even works