Develop Bugs

[ROM][4.2.2] CleanRom V02 [Update 25/01/2014]

Hello !!!
Clean Rom Project !​
About :
based on Huawei firmware B118 !
49 languages !
insecure kernel - linux 3.0.8 !
init.d enabled on kernel !
USB debugging enabled by default !
added module governor minmax ! ( for save battery .. )
added sio, sioplus, vr & zen modules iosched !
removed almost unnecessary Huawei app !
added some Google apps !
Android 4.3.1 Gallery & cammera ( enabled Pinch To Zoom, added more effects & enabled photosphere ! )
Android 4.4 camera ( enabled photosphere ! )
Android 4.4 Google search !
Android 4.4 GoogleKeyboard !
Android 4.4 GoogleHome !
Android 4.4 bootanimation !
added SuperSu instead CM Superuser !
enabled : notification_panel, gloves mode , navigation_bar & Use only 2G network !
Changelog :
CleanRom V02
Downloads :
New Update : CleanRom_V02.zip
CleanRom_V01.zip Sum MD5 : 7e6362843140a20e947d97e4f9a8de4f
Stock_boot&recovery_B118.zip Sum MD5 : 3a4f9a2af2d09e06206bdd27be351608
Installation :
your device should be run also stock firmware B118 ( CN )!
install TWRP Recovery !
go to TWRP Recovery
Wipe
Advanced Wipe -> check : Dalvik Cache , System, Cache, Custom Storage & Data
Swipe to Wipe
Install
External Storage -> CleanRom_V01.zip
Home
Install
External Storage -> Enable_USB.zip
Wipe Cache & Dalvik
Reboot System !
enjoy !!!
Warning :
if you want to revert to stock B118 firmware or flash other Huawei firmware ( UPDATE.APP )
download Stock_boot&recovery_B118.zip
install in TWRP Recovery or :
extract & put boot.img & recovery.img on your external sdcard !
# dd if=/storage/sdcard1/boot.img of=/dev/block/mmcblk0p12
# dd if=/storage/sdcard1/recovery.img of=/dev/block/mmcblk0p11
Now you are able to enter on stock recovery and to make a safe install from Huawei firmware !
Installing only if you are sure what you do & also at your own risk, I'm not responsible in any way, if your device will not boot !!!
​
Screenshots :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
regards,
Surdu Petru

***reserved***
Enable USB for CleanRom V01 !
Please download Enable_USB.zip !
Put your device in TWRP Recovery !
Mount external storage !
Copy archive here !
"Unmount driver from PC !"
Unmount !
Install !
( No need anything to wipe ! )
Reboot to System !
Thanks !

I can't wait to see what it is like to have a clean rom on p6 !

decomarius said:
I can't wait to see what it is like to have a clean rom on p6 !
Click to expand...
Click to collapse
+1

Oh great :3 Hoping this works with the European version of the P6.

Surdu,could you put the navbar smaller and black ??

neodante said:
Surdu,could you put the navbar smaller and black ??
Click to expand...
Click to collapse
te pille neodante xD
Serdu this rom will be quicker than the stock ?

ReDXfiRe said:
Oh great :3 Hoping this works with the European version of the P6.
Click to expand...
Click to collapse
Yes !
neodante said:
Surdu,could you put the navbar smaller and black ??
Click to expand...
Click to collapse
Yes, maybe in the next update, cause now I'm in a hurry to start work on CM
alex61194 said:
te pille neodante xD
Serdu this rom will be quicker than the stock ?
Click to expand...
Click to collapse
For me work like a charm , need also your opinions ...

Translucent or black navbar
Great work surdu_petru, You're the man. Would be even better with a translucent navigation bar. If not possible, black is better than gray.

alex61194 said:
te pille neodante xD
Click to expand...
Click to collapse
Jajajajajaja

Installed and fully working. Like the KK bootanimation.
Thanks Petru. Contributor have to be changed in Developer!

whats about the pull-down menu ... is it vanilla or is it huawei ?

I just have one question. Do we need to have B118 international version or B118 Chinese version. Btw, Chinese version bricked my phone

lucky58 said:
Installed and fully working. Like the KK bootanimation.
Thanks Petru. Contributor have to be changed in Developer!
Click to expand...
Click to collapse
Thanks ...
You are awfully nice
raolleel said:
whats about the pull-down menu ... is it vanilla or is it huawei ?
Click to expand...
Click to collapse
For the moment is still Huawei !

goce.nakov said:
I just have one question. Do we need to have B118 international version or B118 Chinese version. Btw, Chinese version bricked my phone
Click to expand...
Click to collapse
Hi!
Yes, I know... unfortunately must be the Chinese B118 ! I already bricked my device with Chinese B117 ( broken motherboard ) , luckily they gave me a new one, because take too long to replace the motherboard

surdu_petru said:
Hi!
Yes, I know... unfortunately must be the Chinese B118 ! I already bricked my device with Chinese B117 ( broken motherboard ) , luckily they gave me a new one, because take too long to replace the motherboard
Click to expand...
Click to collapse
I will wait for their answer few more days and then I will make some noise for replacement

surdu_petru said:
Hi!
Yes, I know... unfortunately must be the Chinese B118 ! I already bricked my device with Chinese B117 ( broken motherboard ) , luckily they gave me a new one, because take too long to replace the motherboard
Click to expand...
Click to collapse
if i have chinesse b118 and i put b122 i will have a brick? i can put your rom without brick?

Will the 118 Chinese with unlocked bootloader can brick (soft or hard) the cellphone. I'd suggest the direct link for the 118 Chinese version on the opening. Man making me a lil nervous the Chinese firmware 118 might hard brick the P06.

alex61194 said:
if i have chinesse b118 and i put b122 i will have a brick? i can put your rom without brick?
Click to expand...
Click to collapse
I installed B118 (cn) two times from B111 international without issue ! Sould be batter if you install first B111 and than B118 (cn ) !

surdu_petru said:
I installed B118 (cn) two times from B111 international without issue ! Sould be batter if you install first B111 and than B118 (cn ) !
Click to expand...
Click to collapse
i have the chinesse b118 i installed it from b119 my question is i put a international version i have brick?
---------- Post added at 10:48 PM ---------- Previous post was at 10:46 PM ----------
surdu_petru said:
I installed B118 (cn) two times from B111 international without issue ! Sould be batter if you install first B111 and than B118 (cn ) !
Click to expand...
Click to collapse
sorry i for for all the replies xD you can use antutu for see if the score change thanks

[ROM[UNOFFICIAL][CyanogenMod 10.1 | P6-U06 & HAM][08/01/2013]

Hello to everyone !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Huawei Ascend P6-U06​
Huawei Ascend Mate - HAM​
STATE - Stable version ! ​
To be flashed on International version ( locked firmware ) ! ​
About :
builded from the last updated CyanogenMod 10.1 source ;
based on Firmware B125 !
build safe to flash only if you follow the steps to Installation !
Include the last update TWRP Recovery R02.1 !!!
added Camera360 & Torch !
Not Working :
video camera ;
Wi-Fi hotspot ;
H/W video decoder ;
settings/battery data usage ;
Downloads :
New Update : cm-10.1-20140108-UNOFFICIAL-hwp6_u06.zip SumMD5 : d15dd195cd2d6ba93de4ec96fb71a609
cm-10.1-20140108-UNOFFICIAL-hwp6_u06.zip SumMD5 : f16e5cac1310a13d3396fa1df27299c3
cm-10.1-20140105-UNOFFICIAL-hwp6_u06.zip SumMD5 : e210983786bcdedcea6d4f3e4148cd52
cm-10.1_beta.zip SumMD5 : c116fc2f96de8338ee4476058802ecb6
CM10.1_Beta.zip with TWRP Recovery R02 ! SumMD5 : e50ff34fb87fab5ee903d83acadf1046
gapps-jb-20130812-signed.zip !
Installation :
can be installed on any International Firmware !
root your device !
install TWRP Recovery : R02 or R02.1 !
copy cm-10.1 build & gapps on your external sdcard !
put your device in recovery mod ;
Wipe -> Advanced Wipe -> select : Dalvik Cache, System, Cache, Custom Storage & Data !
Swipe to Wipe ;
Install -> select : Storage : External Storage !
select cm-10.1-rom
Add More Zips
select gapps
Swipe to Confirm Flash !
Wipe cache/dalvik !
Reboot System !
Enjoy ...
Bug Fix :
enable_a2dp.zip - 657.98 KB
If Gmail or other gapps cannot update from PlayStore, please navigate to Settings -> Apps -> search your app -> Clear data ! Now please try again to update !
Click to expand...
Click to collapse
Credit :
CyanogenMod, AshRoller, scue
special thanks to @PulseDroid
Source :
GitHub !
Screenshots :
Thank you very much to all donors - ! This helps to maintain and continue this project !
regards,
Surdu Petru

***reserved***

Wondeful! That's i need! Thanks!

Excellent job!
Soon almost have fixed the bugs.
And now this International version, show your great interest and effort to work with CM and P6. :good:
Thank you very much.:laugh:
Best Regards

Woauu! Excellent job.
This rom have the theme chooser app ??

Not Working :
camera ;
gps ;
maybe some other small stuff :
audio a2dp ;
USB mass storage ;
FmRadio - not working yet
Click to expand...
Click to collapse
Works fine here.
UPDATE:
Root doesn't seem to work?
Always says Superuser Denied, even if I set it to prompt, or auto allow. I also tried re-rooting with E-Root
Got a possible fix for camera, testing now.

PulseDroid said:
Works fine here.
UPDATE:
Root doesn't seem to work?
Always says Superuser Denied, even if I set it to prompt, or auto allow. I also tried re-rooting with E-Root
Got a possible fix for camera, testing now.
Click to expand...
Click to collapse
for me works great

@alex61194
Can you move apps to system?

PulseDroid said:
@alex61194
Can you move apps to system?
Click to expand...
Click to collapse
I can't confirmr you now because i back yo clean rom but i use titanium backup and this app requires root for work

Whaaaat ? How did you get around the signature lock thing ?

warea said:
Whaaaat ? How did you get around the signature lock thing ?
Click to expand...
Click to collapse
It's a port, stock kernel.

Yes, I don't know why su not work on this version ! Su it's just ok on B118(cn) port !
But you have here insecure adbd, when you type : adb shell you can see "#" , so should not be hard to fix !
I'll try to fix later cause I'm busy for moment !

Hi, Surdu!
First of all, thanks for your great work. Flashed CM and it works! Will this international version be updated so often as the Chinese B118 based version? Installed this because i didnt want to take risk to brick my brilliant device :laugh:
I've one problem with this! When i booted the device, i started to get popup "Android keyboard (AOSP) stopped, it keeps force closing. I cannot login to play store etc... without keyboard. I managed to install another keyboard (AI TYPe) trought usb, but this was very annoying!
Now everythings working fine!
---------- Post added at 11:21 PM ---------- Previous post was at 10:22 PM ----------
PulseDroid said:
Works fine here.
UPDATE:
Root doesn't seem to work?
Always says Superuser Denied, even if I set it to prompt, or auto allow. I also tried re-rooting with E-Root
Got a possible fix for camera, testing now.
Click to expand...
Click to collapse
Try to root with method 4, root wizard. For me work like a charm.

Root works fine with Method 3 too =)
Edit. Or not, It removes root in every time you reboot...

Hi surdu,
I'm running my HAM with your cm10.1 beta for p6. It seems OK. Below are some points I see from this ROM.
-no root access
-camera cannot connect
-no GPS
-no mobile signal strength icon on the status bar. Only grey triangle there.
-antutu x point 15xxx
-device name will be P6-U06
Will come back for further points.
Anyway, thanks a lot for your great work.
Sent from my P6-U06 using xda app-developers app

googgiggs said:
Hi surdu,
I'm running my HAM with your cm10.1 beta for p6. It seems OK. Below are some points I see from this ROM.
-no root access
-camera cannot connect
-no GPS
-no mobile signal strength icon on the status bar. Only grey triangle there.
-antutu x point 15xxx
-device name will be P6-U06
Will come back for further points.
Anyway, thanks a lot for your great work.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Camera is currently not functional, surdu is working on that. He managed to get the GPS working. Signal strength icon is bugged yes, this happens on many devices with cm, should be easy to fix after he gets the bigger bugs out & hardware working. Antutu score will probably go slightly better once we get different kernels.

Wifi and bluetooth works without cuts ?

No need to wipe when update from last build?

ADHDDHDA said:
No need to wipe when update from last build?
Click to expand...
Click to collapse
Yes, but only cache & dalvik-cache in this case !

neodante said:
Wifi and bluetooth works without cuts ?
Click to expand...
Click to collapse
Any news about this?

[ROM][4.4.2][ Stock Firmware Huawei KitKat B506 CN ]

Hello !
Stock Firmware Huawei KitKat B506 ( Chinese ) !
Code:
[CENTER]* Android 4.4.2 - Stable Chinese Version !
* Kernel version 3.0.8-00771 ( 24/03/2014 )
* Firmware Rooted !
* Stock Firmware Huawei B506 Unmodified ( added only root access ) !
* Installed ONLY on TWRP 2.6.3.7 !!!
* this rom does not contain Gapps ![/CENTER]
Downloads :
Code:
[CENTER]
* [URL="http://www.androidfilehost.com/?fid=23329332407583309"]B506_CN.zip[/URL]
* Mirror : [URL="https://mega.co.nz/#!MoQD3LQR!uC70W0X_3mnNAyaZopJff5tnSnvAjK98mUAMyqOEc0A"]B506_CN.zip[/URL]
* Google GApps for Android 4.4.2 : [URL="https://www.androidfilehost.com/?fid=23311191640114013"]gapps-kk-20140105-signed.zip[/URL]
* Delete unnecessary applications : [URL="https://play.google.com/store/apps/details?id=com.ficeto.alliancemanager&hl=ro"]ROM Customizer[/URL] !
[/CENTER]
Installation:
Code:
[CENTER]* your device must be already updated to Huawei KitKat Beta !
* download rom and put it on external storage !
* go to TWRP and wipe : cache, dalvik-cache, data, cust & system !
* install B506 ROM !
* reboot to system & enjoy !!! [/CENTER]
Enable ART !
Code:
[CENTER]* [URL=http://forum.xda-developers.com/showthread.php?p=51589891#post51589891][DEV]ART Enabler - Kitkat B506[/URL] - by [URL="http://forum.xda-developers.com/member.php?u=4425071"]PulseDroid[/URL][/CENTER]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
regards,
Surdu Petru

*** reserved ***

Are GApps working? Or not because its not mentions in OP, only that they are not included? Can I flash them thru TWRP?
Gesendet von meinem P6-U06

gapps
you can flash gapps over the rom
so far i know
good work @surdu_petru !
LINK GAPPS https://mega.co.nz/#!LtgwkAQb!6nRBqfOR7ZdG7VDqVVX_a39dzOpd4ksqhAP8VGcfsgo

taaeem said:
Are GApps working? Or not because its not mentions in OP, only that they are not included? Can I flash them thru TWRP?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
Yes, gapps also working ! Right now tested, that's why is not yet on OP !

Will this works only on CDMA?

root with kingroot also works ?? ohhh.. now i see its twrp full backup zip ;p
...i was dreamig.. they will give us LTE connectivity support with KK ;p

Hello Petru, will it work on twrp 2.6.3.5? do you know where can we find a change log between this and kk beta?
Ps. Thank you for your great work. Mulțumim, Seara faina!
Sent from my P6-U06 using Tapatalk 2

cpx07 said:
Hello Petru, will it work on twrp 2.6.3.5? do you know where can we find a change log between this and kk beta?
Ps. Thank you for your great work. Mulțumim, Seara faina!
Sent from my P6-U06 using Tapatalk 2
Click to expand...
Click to collapse
Salut !
Maybe will work but with some issue ! You must use 2.6.3.7 because is for KitKat and include also kitkat recovery-kernel !
Change Log !
Multumesc, o seara faina si tie ! ( Thanks & good luck ! )

Are there any differences between this version Abd the update.APP version for stock recovery? Because I'm on Omni Rom and I don't to flash the stock recovery first and then the update also I don't know if the normal version can be rooted?
Gesendet von meinem P6-U06

taaeem said:
Are there any differences between this version Abd the update.APP version for stock recovery? Because I'm on Omni Rom and I don't to flash the stock recovery first and then the update also I don't know if the normal version can be rooted?
Gesendet von meinem P6-U06
Click to expand...
Click to collapse
No, no difference between this rom and stock Huawei B506 !
The only diff : ( has root in ... ) !

can you flash this when coming from omnirom? kitkat beta was flashed before i installed kitkat, so it should work?

How is the battery life. My P6 is stolen, and I dont know if I should get a P6 again of a Galaxy s4 mini. The phones is expensive and I want battery life.

benna said:
How is the battery life. My P6 is stolen, and I dont know if I should get a P6 again of a Galaxy s4 mini. The phones is expensive and I want battery life.
Click to expand...
Click to collapse
just been released, wait for checking

benna said:
How is the battery life. My P6 is stolen, and I dont know if I should get a P6 again of a Galaxy s4 mini. The phones is expensive and I want battery life.
Click to expand...
Click to collapse
Neither. Just wait for 2014 phones to get released and not be stuck with outdated one.

At first flash it gives me an error message, unable to open file, i did the download from the first link via my mobile.
I am downloading now from my laptop and putting it to SD, i will update my comment if necessary.
Edit 1: now i have noticed that the size of the file is different from the first download link compared to the second one
Edit 2: the zip archive from Mega is flashing now, i will come with feedback after install.
Edit 3: the rom booted, feels smooth, i don't know if matters but antutu and quadrant compare to hy52rom v7 , around 15.500-16.000 in antutu and 4500-4900 in quadrand, so that is good.
Great work sandu_petru, thank you for keeping our phone up to date hope to see an amazing custom rom from you in the future, cleaned by all the bloatware from huawei
Thanks

cpx07 said:
At first flash it gives me an error message, unable to open file, i did the download from the first link via my mobile.
I am downloading now from my laptop and putting it to SD, i will update my comment if necessary.
Edit 1: now i have noticed that the size of the file is different from the first download link compared to the second one
Edit 2: the zip archive from Mega is flashing now, i will come with feedback after install.
Thanks
Click to expand...
Click to collapse
How long does it take for the first boot? I'm waiting for about 10 minutes and nothing...

mandgeo said:
How long does it take for the first boot? I'm waiting for about 10 minutes and nothing...
Click to expand...
Click to collapse
Around 5 minutes for me, did you do a clean install?
- wipe everything except internal and external storage
- flash rom
- wipe cache and dalvik
- flash gaps
- wipe cache and dalvik
- reboot

cpx07 said:
Around 5 minutes for me, did you do a clean install?
- wipe everything except internal and external storage
- flash rom
- wipe cache and dalvik
- flash gaps
- wipe cache and dalvik
- reboot
Click to expand...
Click to collapse
Yes. And flashed the rom from Mega. Now i'm back on B132. Someone on huaweinews sais that flashing from stock jb keeps the google apps.

mandgeo said:
Yes. And flashed the rom from Mega. Now i'm back on B132. Someone on huaweinews sais that flashing from stock jb keeps the google apps.
Click to expand...
Click to collapse
hmm..strange, i didn't have any problems, all works for me, i don't know about the battery life, already at 70% in 1 hour, but i was flashing and installing and testing so can't say wright now.

Xa1 - all in one - rom - kernel - recovery - mods - oreo go - other -

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1.ROM - BASED ON STOCK/CM/LINEAGE/AOSP
https://forum.xda-developers.com/xa1/themes/xa1-clean-rom-t3813510
2.KERNEL
https://forum.xda-developers.com/xa1/development/kernel-xperia-xa1-variants-stock-t3814984
3.RECOVERY
4.MODS
5.OREO GO - DOWNLOAD
https://forum.xda-developers.com/xa1/development/oreo-xa1-t3816409
6.OTHER
​

Hi
No TWRP available, is it?

MAREK10747 said:
1.ROM - BASED ON STOCK/CM/LINEAGE/AOSP
https://forum.xda-developers.com/xa1/themes/xa1-clean-rom-t3813510
2.KERNEL
https://forum.xda-developers.com/xa1/development/kernel-xperia-xa1-variants-stock-t3814984
3.RECOVERY
4.MODS
5.OREO GO - DOWNLOAD
https://forum.xda-developers.com/xa1/development/oreo-xa1-t3816409
6.OTHER
​
Click to expand...
Click to collapse
Hi,
I do not wish to discourage any sort of development for Sony (MediaTek) based device but your making some pretty big claims here without no content or clear explanation of just what it is your doing.
Maybe some things are been lost in translation or the thread titles are a little misleading
If your indeed doing "real" kernel Development (not just ramdisk edits) and ROM development then please share your kernel, device and vendor trees on github so we can see what's going on and maybe help and contribute.
If all this stuff is purely ALPHA stage then your thread titles should say [Alpha][Testing][POC]
If the Kernel is STOCK then it should state Stock. A Stock kernel with ramdisk edits is still a STOCK kernel in my eyes so the tile should say [Stock][Modified] Kernel xperia xa1
I believe with a concerted effort from the community here on XDA we could get a legitimate AOSP and LineageOS on our Sony (MediaTek) device's but this would likely need the collaboration of a few dev's with experience of both Sony and MediaTek device development which is a pretty rare combination but one can hope :fingers-crossed:
Keep up the good work and thanks for your efforts thus far :good:

Any source code I share after my work . Now any mods I do on kernel and ramdisk too . Dear bigrammy If you want to help , you can watch my other threads (about lineage os port etc.) , and help me fix problems with actual port of line age . Soon on github if I finish my work I get you code to kernel and other code of android modified by me .

faby GT twrp now is not available for this kernel , but if you flash not my recovery and you install rom manager you can boot into recovery

Not perfekt yet
I have restored the rom, wiped cache and it booted sucsessfuly. But Google Play services, Xperia Home (they just crash) and wifi arent working on my phone yet.
Thats why i switched back to stock rom. If you (or someone else ) could help me with that i would be very happy.

kpfreak said:
I have restored the rom, wiped cache and it booted sucsessfuly. But Google Play services, Xperia Home (they just crash) and wifi arent working on my phone yet.
Thats why i switched back to stock rom. If you (or someone else ) could help me with that i would be very happy.
Click to expand...
Click to collapse
Google play you can restore by gaaps zip flashed . xperia home was deleted from rom , and user than restore the rom must install other launcher . Wifi problem is not system problem , but recovery problem . Recovery don't unmount system correct and set some permisions .

MAREK10747 said:
Google play you can restore by gaaps zip flashed . xperia home was deleted from rom , and user than restore the rom must install other launcher . Wifi problem is not system problem , but recovery problem . Recovery don't unmount system correct and set some permisions .
Click to expand...
Click to collapse
Do you know a recovery file that works fine with that?

kpfreak said:
Do you know a recovery file that works fine with that?
Click to expand...
Click to collapse
Now I do some port's of recovery , and I have the same problem with that . I try to fix that , but I'm not sure when I do that to finish .

@MAREK10747 can you please tell me how to DRM fix the stock kernel, having .ta? Thank you :highfive:

I'm from poland and my english is not perfect ... I can do that , but how to say that in english I don't know I can to do with ta make patch for drm .

MAREK10747 said:
Any source code I share after my work . Now any mods I do on kernel and ramdisk too . Dear bigrammy If you want to help , you can watch my other threads (about lineage os port etc.) , and help me fix problems with actual port of line age . Soon on github if I finish my work I get you code to kernel and other code of android modified by me .
Click to expand...
Click to collapse
I have ordered a XA1 which should arrive very soon I also have the XA and L1 .
I would really like to help/assist but I am very new to compiling and I also need to upgrade my PC to cope with the demands of building Oreo >
I aim to upgrade it by the end of next month.
A good place to start with Lineage on these MediaTek devices would here https://github.com/LineageOS-MediaTek as this may save quite a lot time finding fixes and edits to the device tree setup for MediaTek.
Kernel Moto E4 "nicklaus" ( mt6737 ) HERE

[TWRP] [ TWRP 3.2.0-0/3.3.1-0 For Huawei MediaPad M3 Lite 8/10 ]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP - 3.3.1-0 For Huawei MediaPad M3 Lite 8/10
Officially Supported Devices :
Huawei MediaPad M3 Lite 10 : ( code name Bach ) : BAH-AL00/BAH-L01/BAH-L09/BAH-W09
Huawei MediaPad M3 Lite 8 : ( code name Chopin ) : CPN-AL00/CPN-L0J/CPN-L09/CPN-W09
​
Instructions :
1. unlock bootloader
3. unlock OEM on Developer options
3. enter on bootloader mode :
( switch off your device then keep pressed volume down key when plug to USB cable )
4. flash TWRP 3.2.0-0 recovery using the following command : "fastboot flash recovery twrp_3.2.0-0.img"
4.1. Update TWRP to 3.3.1-0 ONLY if your device run Android Pie ( LOS 16.0 )
5. reboot to recovery ( please check this info after TWRP was installed - and before take any actions )
Downloads :
TWRP 3.2.0 - intended to be installed on stock Huawei Firmware Android N ( but only for install LOS 16.0 )
( This is the first TWRP which must be installed on your device running EMUI 5.x Android N )
twrp_3.2.0-0.img MD5: 201476ac16a613da42acbf9a36d78c79
TWRP 3.3.1 - intended to be used with LineageOS 16.0 Android Pie !
( You must use TWRP 3.2.0-0 to flash LOS 16.0 - later you can update to TWRP 3.3.1-0 )
twrp_3.3.1-0.img MD5: 967f55ab71a755f2635e7b990dcc3922
Source :
kernel source : https://github.com/Huawei-Dev/android_kernel_huawei_bach
Credit :
TeamWin - TWRP
Mention :
TWRP for Huawei MediaPad M3 Lite 8 (CPN) was fixed with help of @Lothgar & @fallensoldier.
Thank you guys for your help !
Best regards !

*** reserved ***

Thanks! does it support CPN-L09 as well?

BAH-W09 ?

helicon said:
Thanks! does it support CPN-L09 as well?
Click to expand...
Click to collapse
It's only for Huawei MediaPad M3 Lite 10 ( code BAH/BACH ) !
The4anoni said:
BAH-W09 ?
Click to expand...
Click to collapse
Yes, it's shoud working on all Huawei BAH devices : MediaPad M3 Lite 10 !
There is 3 devices MediaPad M3 Lite 10 code : BAH-AL00, BAH-L09 & BAH-W09 !
I can't test it on BAH-W09, therefore it is not specified in the title.
BTW, I'm working on Android 9 Pie with porting LOS 16.0 to BAH-AL00/L09, I don't know if will working also on BAH-W09 because this device has not the same kernel regarding Huawei kernel source !

Hey.I have HUAWEI MediaPad M3 Lite 10 BAH-L09. You can write how to properly unlock the bootloader.

gucio1976 said:
Hey.I have HUAWEI MediaPad M3 Lite 10 BAH-L09. You can write how to properly unlock the bootloader.
Click to expand...
Click to collapse
Sorry, I can't because it's not for free ! You should check on Google for something like this : https://www.getdroidtips.com/unlock-bootloader-huawei-smartphone/
I just used the tool provided from Ministry Of Solutions and it's working well for unlock bootloader !
Good luck !

Android Pie on my Huawei MediaPad M3 Lite 10 :

Waaao, nice job!!!
How to get it please?
Thx!

pipolas said:
Waaao, nice job!!!
How to get it please?
Thx!
Click to expand...
Click to collapse
Hi !
Unfortunately is not yet ready, I still have to work on : sensors, camera & data LTE.
After that, I will upload it here for who wants to test/use it

Alright, thanks for the update !
I will be able to test it on my BAH-W09 (the Mediapad M3 lite 10 wifi, french version). Not afraid of bricking it.
Good luck with sensors, camera and LTE ! I'll check this thread often in the next weeks

I have an unlocked bootloader. You can do it one step at a time, write how to upload TWRP.

gucio1976 said:
I have an unlocked bootloader. You can do it one step at a time, write how to upload TWRP.
Click to expand...
Click to collapse
Into OP you have a "download" section for download TWRP and also you have a "Instruction" section where it writes step by step how to install TWRP on your device .... what you need more

I have installed twrp_bach.img:good:
Is this android 7th stock is the original, https: //github.com/Huawei-Dev/android_kernel_huawei_bach. You can install it from TWRP ... this tablet.
??

gucio1976 said:
I have installed twrp_bach.img:good:
Is this android 7th stock is the original, https: //github.com/Huawei-Dev/android_kernel_huawei_bach. You can install it from TWRP ... this tablet.
??
Click to expand...
Click to collapse
Yes; it's stock Huawei kernel for our device downloaded from here : https://consumer.huawei.com/en/open...Type=openSourceSoftware&pageSize=10&curPage=1 !
Unfortunately, it will not work ... you should ask Huawei why they release source code of kernel in this bad way !
To make it booted I applied a bunch of patches ... but will not boot on stock Huawei ROM, just only on Custom ROMs !

I mean, how would this android 7 break now, then how to recover it. It means to install the renewal, because the original recovery I removed, now has TWRP. Can you upload the original recovery again and install Android 7 original.:cyclops:
https://www.blogthetech.com/flash-file-huawei-mediapad-m3-lite-10-firmware-download-stock-rom/
https://huaweiflash.com/how-to-flash-huawei-mediapad-m3-lite-10-stock-firmware-all-firmwares/
https://zfirmware.com/update-huawei-mediapad-m3-lite-to-android-7-0-nougat/
http://www.gsmflashweb.com/huawei-mediapad-m3-lite-10-firmware-file-download/
I am sorry for my English translating google translator.

gucio1976 said:
I mean, how would this android 7 break now, then how to recover it. It means to install the renewal, because the original recovery I removed, now has TWRP. Can you upload the original recovery again and install Android 7 original.:cyclops:
https://www.blogthetech.com/flash-file-huawei-mediapad-m3-lite-10-firmware-download-stock-rom/
https://huaweiflash.com/how-to-flash-huawei-mediapad-m3-lite-10-stock-firmware-all-firmwares/
https://zfirmware.com/update-huawei-mediapad-m3-lite-to-android-7-0-nougat/
http://www.gsmflashweb.com/huawei-mediapad-m3-lite-10-firmware-file-download/
I am sorry for my English translating google translator.
Click to expand...
Click to collapse
Here it is :
RECOVERY_stock_Android7_HuaweiMediaPadM3Lite.zip MD5: cc8ef0d325f63d1c0f4761345bf77f32

I just managed to fix Sensors on LineageOS 16, Android Pie :
Now I'm working on enable Camera ...

surdu_petru said:
I just managed to fix Sensors on LineageOS 16, Android Pie :
Now I'm working on enable Camera ...
Click to expand...
Click to collapse
Huh - you have Lineage OS working on the Mediapad M3?? If there is such a miracle, please do share!

bejam said:
Huh - you have Lineage OS working on the Mediapad M3?? If there is such a miracle, please do share!
Click to expand...
Click to collapse
Yes, currently it's running on my Huawei MediaPad M3 Lite 10 !
I'm hard working to fix camera ... but I'll release a test version soon. Thanks for understanding !